summaryrefslogtreecommitdiffstats
path: root/drivers/media
Commit message (Collapse)AuthorAgeFilesLines
* drivers/media/dvb/dvb-core/dvb_frontend.c: needs semaphore.hAndrew Morton2009-12-011-0/+1
| | | | | | | | | | | | | | Fixes: v4l/dvb_frontend.c: In function 'dvb_frontend_stop': v4l/dvb_frontend.c:707: error: implicit declaration of function 'init_MUTEX' Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14609 Reported-by: <tstrelar@gmail.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* V4L/DVB (13530): Fix wrong parameter order in memsetAlan Cox2009-11-271-1/+1
| | | | | | | | | | | | | | | | | | Edwin Török found the following: In function ‘memset’, inlined from ‘ir_input_init’ at drivers/media/common/ir-functions.c:67: /home/edwin/builds/linux-2.6/arch/x86/include/asm/string_64.h:61: warning: call to ‘__warn_memset_zero_len’ declared with attribute warning: memset used with constant zero length parameter; this could be due to transposed parameters memset(ir->ir_codes, sizeof(ir->ir_codes), 0); In actual practice the only caller I can find happens to already have cleared the buffer before calling ir_input_init. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13481): sh_mobile_ceu_camera: fix compile warningHans Verkuil2009-11-271-1/+0
| | | | | | | | | Trivial fix for this compile warning: v4l/sh_mobile_ceu_camera.c:1789: warning: label 'exit_free_irq' defined but not used Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13436): cxusb: Fix hang on DViCO FusionHDTV DVB-T Dual Digital 4 ↵Robert Lowery2009-11-271-1/+9
| | | | | | | | | | | | | | | (rev 1) Address yet another regression introduced by the introduction of the zl10353 disable_i2c_gate field. djh - I unmangled the patch which apparently got screwed up in the user's email client. Signed-off-by: Robert Lowery <rglowery@exemail.com.au> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13412): SMS_SIANO_MDTV should depend on HAS_DMAGeert Uytterhoeven2009-11-271-1/+1
| | | | | | | | | | | | When building for Sun 3: drivers/built-in.o: In function `smscore_unregister_device': drivers/media/dvb/siano/smscoreapi.c:723: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `smscore_register_device': drivers/media/dvb/siano/smscoreapi.c:365: undefined reference to `dma_alloc_coherent' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13371): davinci: remove stray duplicate config pointerHans Verkuil2009-11-261-1/+0
| | | | | | | | | | | The vpif_config struct was renamed to vpif_display_config, but there is still a stray vpif_config *config pointer in vpif_display.c, preventing it from compiling. Remove this old duplicate pointer. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13366): em28xx: fix Reddo DVB-C USB TV Box GPIOAntti Palosaari2009-11-261-1/+1
| | | | | | | | Set device GPIOs only once. There is no need for .dvb_gpio to select between analog and digital because device is digital only. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13345): soc-camera: sh_mobile_ceu_camera: call pm_runtime_disableKuninori Morimoto2009-11-261-1/+4
| | | | | | | | pm_runtime_disable is needed if it failed or removed Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13344): soc-camera: properly initialise the device object when reusingGuennadi Liakhovetski2009-11-261-5/+12
| | | | | | | | | | Commit ef373189f62413803b7b816c972fc154c488cdc0 "fix use-after-free Oops, resulting from a driver-core API change" fixed the Oops, but didn't correct missing device object initialisation. This patch makes unloading and reloading of soc-camera host- and client-drivers possible again. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13343): v4l: add more missing linux/sched.h includesGuennadi Liakhovetski2009-11-264-0/+4
| | | | | Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13321): radio-gemtek-pci: fix double mutex_lockHans Verkuil2009-11-261-2/+0
| | | | | | | | | Double mutexlock found by the Linux Driver Verification project and reported by Alexander Strakh. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13314): saa7134: set ts_force_val for the Hauppauge WinTV HVR-1150Michael Krufky2009-11-071-0/+1
| | | | | | | | | | The Hauppauge WinTV HVR-1150 retail boards require the FORCE_TS_VALID bit to be set in order to function properly. This change will work on the early revisions on the board as well, but the final revision will not function without this change. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13313): saa7134: add support for FORCE_TS_VALID mode for mpeg ts inputMichael Krufky2009-11-072-2/+5
| | | | | | | | | | | | When FORCE_TS_VALID mode is enabled, the saa713x will accept MPEG TS input without requiring TS_VALID set high. This is required for some new boards to function properly, due to the hardware design implementation. The configuration is toggled within the board setup configuration. Boards that do not have this bit set will function as before with no change. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13311): uvcvideo: Fix compilation warning with 2.6.32 due to type ↵Laurent Pinchart2009-11-071-1/+1
| | | | | | | | | | mismatch with abs() The abs() macro has changed in 2.6.32 and returns a long instead of an int. Fix the driver to avoid compilation warnings. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13309): uvcvideo: Ignore the FIX_BANDWIDTH for compressed videoLaurent Pinchart2009-11-071-1/+2
| | | | | | | | | The FIX_BANDWIDTH quirk tries to work around cameras requesting the maximum bandwidth regardless of the image size by computing a bandwidth estimate. This works only for uncompressed frames. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13287): ce6230 - saa7164-cmd: Fix wrong sizeofJean Delvare2009-11-072-2/+2
| | | | | | | | | | | Which is why I have always preferred sizeof(struct foo) over sizeof(var). Cc: Antti Palosaari <crope@iki.fi> Acked-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13286): pxa-camera: Fix missing sched.hJonathan Cameron2009-11-071-0/+1
| | | | | | | | | Required for wakeup call. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13264): gspca_mr97310a: Change vstart for CIF sensor type 1 camsTheodore Kilgore2009-11-071-1/+1
| | | | | | | | | | | gspca_mr97310a: Change vstart for CIF sensor type 1 cams This fixes the distortion at the end of the frame, and avoids the bad frame dropping done because of this distortion, trippling the framerate! Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13257): gspca - m5602-s5k4aa: Add vflip for Fujitsu Amilo Xi 2528Erik Andrén2009-11-071-0/+6
| | | | | | | Adds a vflip quirk for the Fujitsu Amilo Xi 2528. Thanks to Evgeny for the report. Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13256): gspca - m5602-s5k4aa: Add another MSI GX700 vflip quirkErik Andrén2009-11-071-0/+7
| | | | | | | | Adds another vflip quirk for the MSI GX700. Thanks to John Katzmaier for reporting. Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13255): gspca - m5602-s5k4aa: Add vflip quirk for the Bruneinit laptopErik Andrén2009-11-071-0/+7
| | | | | | | Adds a vflip quirk for the Bruneinit laptop. Thanks to Jörg for the report Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13240): firedtv: fix regression: tuning fails due to bogus error returnStefan Richter2009-11-071-7/+1
| | | | | | | | | | Since 2.6.32(-rc1), DVB core checks the return value of dvb_frontend_ops.set_frontend. Now it becomes apparent that firedtv always returned a bogus value from its set_frontend method. CC: stable@kernel.org Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13237): firedtv: length field corrupt in ca2host if length>127Henrik Kurelid2009-11-071-18/+20
| | | | | | | | | | | | | | | | This solves a problem in firedtv that has become major for Swedish DVB-T users the last month or so. It will most likely solve issues seen by other users as well. If the length of an AVC message is greater than 127, the length field should be encoded in LV mode instead of V mode. V mode can only be used if the length is 127 or less. This patch ensures that the CA_PMT message is always encoded in LV mode so PMT message of greater lengths can be supported. Signed-off-by: Henrik Kurelid <henrik@kurelid.se> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13230): s2255drv: Don't conditionalize video buffer completion on ↵Mike Isely2009-11-071-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | waiting processes The s2255 driver had logic which aborted processing of a video frame if there was no process waiting on the video buffer in question. That simply doesn't work when the application is doing things in an asynchronous manner. If the application went to the trouble to queue the buffer in the first place, then the driver should always attempt to complete it - even if the application at that moment has its attention turned elsewhere. Applications which always blocked waiting for I/O on the capture device would not have been affected by this. Applications which *mostly* blocked waiting for I/O on the capture device probably only would have been somewhat affected (frame lossage, at a rate which goes up as the application blocks less). Applications which never blocked on the capture device (e.g. polling only) however would never have been able to receive any video frames, since in that case this "is anyone waiting on this?" check on the buffer never would have evalutated true. This patch just deletes that harmful check against the buffer's wait queue. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> CC: stable@kernel.org
* V4L/DVB (13202): smsusb: add autodetection support for three additional ↵Michael Krufky2009-11-071-0/+6
| | | | | | | | | | | | | Hauppauge USB IDs Add support for three new Hauppauge Device USB IDs: 2040:b900 2040:b910 2040:c000 Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13190): em28xx: fix panic that can occur when starting audio streamingDevin Heitmueller2009-11-071-0/+5
| | | | | | | | | | | | | Because the counters were not reset when starting up streaming, they would be reused from the previous run. This can result in cases such that when the second instance of streaming starts up, the "cnt" variable in em28xx_audio_isocirq() can end up being negative, resulting in attempting to write to memory before the start of runtime->dma_area (as well as having a negative number of bytes to copy). Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13170): bttv: Fix reversed polarity error when switching video standardMike Isely2009-11-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bttv driver function which handles switching of the video standard (set_tvnorm() in bttv-driver.c) includes a check which can optionally also reset the cropping configuration to a default value. It is "optional" based on a comparison of the cropcap parameters of the previous vs the newly requested video standard. The comparison is being done with a memcmp(), a function which only returns a true value if the comparison actually fails. This if-statement appears to have been written to assume wrong memcmp() semantics. That is, it was re-initializing the cropping configuration only if the new video standard did NOT have different cropcap values. That doesn't make any sense. One definitely should reset things if the cropcap parameters are different - if there's any comparison to made at all. The effect of this problem was that a transition from, say, PAL to NTSC would leave in place old cropping setup that made sense for the PAL geometry but not for NTSC. If the application doesn't care about cropping it also won't try to reset the cropping configuration, resulting in an improperly cropped video frame. In the case I was testing this actually caused black video frames to be displayed. Another interesting effect of this bug is that if one does something which does NOT change the video standard and this function is run, then the cropping setup gets reset anyway - again because of the backwards comparison. It turns out that just running anything which merely opens and closes the video device node (e.g. v4l-info) will cause this to happen. One can argue that simply opening the device node and not doing anything to it should not mess with any of its state - but because of this behavior, any TV app which does such things (e.g. xawtv) probably therefore doesn't see the problem. The solution is to fix the sense of the if-statement. It's easy to see how this mistake could have been made given how memcmp() works. The patch is therefore removal of a single "!" character from the if-statement in set_tvnorm in bttv-driver.c. Signed-off-by: Mike Isely <isely@pobox.com> CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13169): bttv: Fix potential out-of-order field processingMike Isely2009-11-071-4/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a subtle interaction in the bttv driver which can result in fields being repeatedly processed out of order. This is a problem specifically when running in V4L2_FIELD_ALTERNATE mode (probably the most common case). 1. The determination of which fields are associated with which buffers happens in videobuf, before the bttv driver gets a chance to queue the corresponding DMA. Thus by the point when the DMA is queued for a given buffer, the algorithm has to do the queuing based on the buffer's already assigned field type - not based on which field is "next" in the video stream. 2. The driver normally tries to queue both the top and bottom fields at the same time (see bttv_irq_next_video()). It tries to sort out top vs bottom by looking at the field type for the next 2 available buffers and assigning them appropriately. 3. However the bttv driver *always* actually processes the top field first. There's even an interrupt set aside for specifically recognizing when the top field has been processed so that it can be marked done even while the bottom field is still being DMAed. Given all of the above, if one gets into a situation where bttv_irq_next_video() gets entered when the first available buffer has been pre-associated as a bottom field, then the function is going to process the buffers out of order. That first available buffer will be put into the bottom field slot and the buffer after that will be put into the top field slot. Problem is, since the top field is always processed first by the driver, then that second buffer (the one after the first available buffer) will be the first one to be finished. Because of the strict fifo handling of all video buffers, then that top field won't be seen by the app until after the bottom field is also processed. Worse still, the app will get back the chronologically later bottom field first, *before* the top field is received. The buffer's timestamps will even be backwards. While not fatal to most TV apps, this behavior can subtlely degrade userspace deinterlacing (probably will cause jitter). That's probably why it has gone unnoticed. But it will also cause serious problems if the app in question discards all but the latest received buffer (a latency minimizing tactic) - causing one field to only ever be displayed since the other is now always late. Unfortunately once you get into this state, you're stuck this way - because having consumed two buffers, now the next time around the "first" available buffer will again be a bottom field and the same thing happens. How can we get into this state? In a perfect world, where there's always a few free buffers queued to the driver, it should be impossible. However if something disrupts streaming, e.g. if the userspace app can't queue free buffers fast enough for a moment due perhaps to a CPU scheduling glitch, then the driver can get momentarily starved and some number of fields will be dropped. That's OK. But if an odd number of fields get dropped, then that "first" available buffer might be the bottom field and now we're stuck... This patch fixes that problem by deliberately only setting up a single field for one frame if we don't get a top field as the first available buffer. By purposely skipping the other field, then we only handle a single buffer thus bringing things back into proper sync (i.e. top field first) for the next frame. To do this we just drop the few lines in bttv_irq_next_video() that attempt to set up the second buffer when that second buffer isn't for the bottom field. This is definitely a problem in when in V4L2_FIELD_ALTERNATE mode. In the other modes this change either has no effect or doesn't harm things any further anyway. Signed-off-by: Mike Isely <isely@pobox.com> CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13167): pt1: Fix a compile error on armHIRANO Takahito2009-11-071-0/+1
| | | | | | | | The lack of #include <linux/vmalloc.h> caused a compile error on some architectures. Signed-off-by: HIRANO Takahito <hiranotaka@zng.info> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13132): fix use-after-free Oops, resulting from a driver-core API ↵Guennadi Liakhovetski2009-11-071-7/+9
| | | | | | | | | | | change Commit b4028437876866aba4747a655ede00f892089e14 has broken again re-use of device objects across device_register() / device_unregister() cycles. Fix soc-camera by nullifying the struct after device_unregister(). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13131): pxa_camera: fix camera pixel format configurationGuennadi Liakhovetski2009-11-071-1/+3
| | | | | | | | | A missed conversion prevents correct pixel format negotiation with client drivers. Reported-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13129): sh_mobile_ceu_camera: fix cropping for scaling clientsGuennadi Liakhovetski2009-11-071-2/+2
| | | | | | | Fix a bug in cropping calculation, when the client is also scaling the image. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13122): gscpa - stv06xx + ov518: dont discard every other frameHans de Goede2009-11-072-2/+3
| | | | | | | | | | | | When we call gspca_frame_add, it returns a pointer to the frame passed in, unless we call it with LAST_PACKET, when it will return a pointer to a new frame in which to store the frame data for the next frame. The frame pointer was not updated in stv06xx and ov518. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13109): tda18271: fix signedness issue in ↵Seth Barry2009-11-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tda18271_rf_tracking_filters_init While having tda18271 module set with debug=17 (cal & info prints) and cal=0 (delay calibration process until first use) - I discovered that during the calibration process, if the frequency test for 69750000 returned a bcal of 0 (see tda18721-fe.c in tda18271_powerscan func) that the tuner wouldn't be able to pickup any of the frequencies in the range (all the other frequencies bands returned bcal=1). I spent some time going over the code and the NXP's tda18271 spec (ver.4 of it i think) and adding a lot of debug prints and walking/stepping through the calibration process. I found that when the powerscan fails to find a frequency, the rf calibration is not run and the default value is supposed to be used in its place (pulled from the RF_CAL_map table) - but something was getting goofed up there. Now, my c coding skills are very rusty, but i think root of the problem is a signedness issue with the math operation for calculating the rf_a1 and rf_a2 values in tda18271_rf_tracking_filters_init func, which results in values like 20648 for rf_a1 (when it should probably have a value like 0, or so slightly negative that it should be zero - this bad value for rf_a1 would in turn makes the approx calc within tda18271c2_rf_tracking_filters_correction go out of whack). The simplest solution i found was to explicitly convert the signedness of the denominator to avoid the implicit conversion. The values placed into the u32 rf_freq array should never exceed about 900mhz, so i think the s32 max value shouldn't be an issue in this case. I've tested it out a little, and even when i get a bcal=0 with the modified code, the default calibration value gets used, rf_a1 is zero, and the tuner seems to lock on the stream and mythtv seems to play it fine. Signed-off-by: Seth Barry <seth@cyberseth.com> Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13107): tda18271: fix overflow in FM radio frequency calculationMichael Krufky2009-11-071-2/+2
| | | | | | | | | | | | | | Multiplication by 62500 causes an overflow in the 32 bit freq variable, which is later divided by 1000 when using FM radio. This patch prevents the overflow by scaling the frequency value correctly upfront. Thanks to Henk Vergonet for spotting the problem and providing a preliminary patch, which this changeset was based upon. Cc: Henk Vergonet <Henk.Vergonet@gmail.com> Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13079): dib0700: fixed xc2028 firmware loading kernel oopsMartin Samek2009-11-071-0/+5
| | | | | | | | | | | | | | | Fixing kernel oops when driver attemps to load xc2028 firmware. Note by djh: the patch contribute by Martin is a port of a fix I made during the PCTV 340e development. It's a temporary workaround that fixes a regression (an OOPS condition) and the real fix should be in the code that manages the i2c master on the dib7000p. But this fix does address the immmediate regression and should be merged upstream until we do a cleaner fix. Signed-off-by: Martin Samek <martin@marsark.sytes.net> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13050): DIB0700: fix-up USB device ID for Terratec/LeadtekPatrick Boettcher2009-11-071-9/+6
| | | | | | | | | | git commit db48138f6bc4d2b613b08731ffc8b319432ebc25 changed by accident the assignment of certain USB IDs to their device-specific-handlers. Thanks to Edward Sheldrake for finding this regression Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13048): dib0070: fix build dependency when driver is disabledMichael Krufky2009-11-072-2/+7
| | | | | | | | | | Fix build dependency on function, dib0070_ctrl_agc_filter [mchehab@redhat.com: reverted the quick workaround 3f48258e50ef4] Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* headers: remove sched.h from interrupt.hAlexey Dobriyan2009-10-114-0/+4
| | | | | | | | After m68k's task_thread_info() doesn't refer to current, it's possible to remove sched.h from interrupt.h and not break m68k! Many thanks to Heiko Carstens for allowing this. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
* headers: remove sched.h from poll.hAlexey Dobriyan2009-10-044-0/+4
| | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* const: constify remaining file_operationsAlexey Dobriyan2009-10-012-2/+2
| | | | | | | | [akpm@linux-foundation.org: fix KVM] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* const: mark struct vm_struct_operationsAlexey Dobriyan2009-09-2713-13/+13
| | | | | | | | | | | * mark struct vm_area_struct::vm_ops as const * mark vm_ops in AGP code But leave TTM code alone, something is fishy there with global vm_ops being used. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* sh_mobile_ceu_camera: fix compile breakage, caused by a bad mergeGuennadi Liakhovetski2009-09-251-2/+2
| | | | | | Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* Merge branch 'for_linus' of ↵Linus Torvalds2009-09-246-14/+13
|\ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB (13039): dib0700: not building CONFIG_DVB_TUNER_DIB0070 breaks compilation V4L/DVB (13038): dvbdev: Remove an anoying/uneeded warning V4L/DVB (13037): go7007: Revert compatibility code added at the wrong place media: video: Fix build in saa7164
| * V4L/DVB (13039): dib0700: not building CONFIG_DVB_TUNER_DIB0070 breaks ↵Mauro Carvalho Chehab2009-09-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | compilation As reported by Ingo Molnar: Here's another new build breakage that triggers in -tip testing: drivers/built-in.o:(.data+0xb1f40): undefined reference to `dib0070_ctrl_agc_filter' drivers/built-in.o:(.data+0xb1f80): undefined reference to `dib0070_ctrl_agc_filter' triggers due to: CONFIG_DVB_USB_DIB0700=y CONFIG_DVB_TUNER_DIB0070 is not set While working on a better approach, for now, let's just select tuner dib0070 anytime we compile dib0700. Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * V4L/DVB (13038): dvbdev: Remove an anoying/uneeded warningMauro Carvalho Chehab2009-09-221-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As pointed by Marcin Slusarz <marcin.slusarz@gmail.com>, the warns happens because CONFIG_DVB_MAX_ADAPTERS depends on CONFIG_DVB_CORE, and there are valid configs where DVB_CORE is not selected. This causes such warnings, for every V4L and common drivers that may or may not be compiled with DVB support: drivers/media/dvb/dvb-core/dvbdev.h:36:2: warning: #warning invalid CONFIG_DVB_MAX_ADAPTERS value We can safely remove the warning. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * media: video: Fix build in saa7164Ingo Molnar2009-09-224-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | -tip testing found that the x86 build (64-bit allyesconfig) fails due to: LD vmlinux.o drivers/built-in.o:(.bss+0x4b648): multiple definition of `debug' arch/x86/built-in.o:(.kprobes.text+0x88): first defined here ld: Warning: size of symbol `debug' changed from 90 in arch/x86/built-in.o to 4 in drivers/built-in.o make: *** [vmlinux.o] Error 1 This is because recent saa7164 changes introduced a global symbol named 'debug'. The x86 platform code already defines a 'debug' symbol. (which is named in a too generic way as well - but it can be used nicely to weed out too generic symbols in drivers ;-) Rename it to saa_debug. [mchehab@redhat.com: use module_param_named to preserve old name] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* | headers: utsname.h reduxAlexey Dobriyan2009-09-233-3/+0
|/ | | | | | | | | | | | | * remove asm/atomic.h inclusion from linux/utsname.h -- not needed after kref conversion * remove linux/utsname.h inclusion from files which do not need it NOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however due to some personality stuff it _is_ needed -- cowardly leave ELF-related headers and files alone. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2009-09-228-13/+13
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits) trivial: fix typo in aic7xxx comment trivial: fix comment typo in drivers/ata/pata_hpt37x.c trivial: typo in kernel-parameters.txt trivial: fix typo in tracing documentation trivial: add __init/__exit macros in drivers/gpio/bt8xxgpio.c trivial: add __init macro/ fix of __exit macro location in ipmi_poweroff.c trivial: remove unnecessary semicolons trivial: Fix duplicated word "options" in comment trivial: kbuild: remove extraneous blank line after declaration of usage() trivial: improve help text for mm debug config options trivial: doc: hpfall: accept disk device to unload as argument trivial: doc: hpfall: reduce risk that hpfall can do harm trivial: SubmittingPatches: Fix reference to renumbered step trivial: fix typos "man[ae]g?ment" -> "management" trivial: media/video/cx88: add __init/__exit macros to cx88 drivers trivial: fix typo in CONFIG_DEBUG_FS in gcov doc trivial: fix missing printk space in amd_k7_smp_check trivial: fix typo s/ketymap/keymap/ in comment trivial: fix typo "to to" in multiple files trivial: fix typos in comments s/DGBU/DBGU/ ...
| * trivial: fix typos "man[ae]g?ment" -> "management"Uwe Kleine-Koenig2009-09-213-4/+4
| | | | | | | | | | Signed-off-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit (git 2.34.1) at 2024-11-16 22:22:51 +0000