summaryrefslogtreecommitdiffstats
path: root/drivers/media/video/cx18
Commit message (Collapse)AuthorAgeFilesLines
* V4L/DVB (13912): cx18: Fix tuner reset pin in card entry for the Leadtek PVR2100Sergey Bolshakov2010-02-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the "xceive_pin" setting from "15" to "1" for the PVR2100 -- the same as the PVR3100H. This properly resets the XC2028 tuner on the PVR2100. Sergey's original email report: Hi. Seems cx18 module has incorrect .xceive_pin value for card, as i see lots of i2c errors in dmesg from xc2028. i'm using 2.6.32.2, my hardware is: 00:09.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23418 Single-Chip MPEG-2 Encoder with Integrated Analog Video/Broadcast Audio Decoder [14f1:5b7a] Subsystem: LeadTek Research Inc. Device [107d:6f27] Flags: bus master, medium devsel, latency 64, IRQ 17 Memory at f0000000 (32-bit, non-prefetchable) [size=64M] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Kernel driver in use: cx18 Kernel modules: cx18 Following fixes this problem for me, the rest seems working: Reported-by: Sergey Bolshakov <sbolshakov@altlinux.ru> Tested-by: Sergey Bolshakov <sbolshakov@altlinux.ru> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13910): cx18: Fix set indextable command to properly select I/P/B ↵Andy Walls2010-02-262-3/+4
| | | | | | | | | | | index entries The CX18_CPU_SET_INDEXTABLE command was being called with the wrong number of arguments causing the index table frame type selection mask to be set wrong. Now the IDX stream properly sends entries for I, P, and B frames. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13909): cx18: Clean up dead code from ivtv once used for IDX processingAndy Walls2010-02-262-17/+1
| | | | | Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13908): cx18: Add initial working VIDIOC_G_ENC_INDEX ioctl() supportAndy Walls2010-02-263-13/+146
| | | | | | | | | | | | | | | | | | VIDIOC_G_ENC_INDEX support see the light of day. Some notes: 1. With default capture parameters, the CX23418 seems to transfer 192 index entries (4.5 kB worth) at 10 second intervals. 2. Index streams don't seem to be supported for MPEG 2 TS streams 3. The index entries seem to claim every frame is a B-Frame. Possible firmware bug. 4. The cx18 driver does not try to capture an index stream when inserting sliced VBI into the MPEg stream as the offsets would need fixup. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13907): cx18: Perform automatic rotation of very old, unread IDX ↵Andy Walls2010-02-263-1/+33
| | | | | | | | | | | buffers According to the v4l2 spec, very old MPEG index entries needs to be discarded in favor of newer index entries. This change ensures the firmware always has buffers for index entries at the expense of the oldest unread buffers. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13906): cx18: Start IDX streams automatically as an internal ↵Andy Walls2010-02-263-72/+125
| | | | | | | | | | | | | | | | | | | associated stream This change starts the IDX stream along with the MPG stream as an internal use (only) stream much like the VBI stream can be started as an internal use stream for inserting sliced VBI packets. The IDX stream is not started automatically with an MPEG strem if the IDX stream is disabled (no buffers allocated) or if sliced VBI insertion is being performed by the cx18 driver. The cx18 driver doing sliced VBI insertion makes the offsets in the IDX stream inaccurate for the final MPEG stream presented to user space. Since fixing the IDX offsets ourselves is not easy and we cannot easily do what ivtv does to fix the offsets, we'll make sliced VBI insertion and MPEG Index capture mutually exclusive for now. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13905): cx18: Allow MPEG index streams to be started and stopped ↵Andy Walls2010-02-261-5/+13
| | | | | | | | | | | | | | internally This change allows the IDX stream to be started and stopped as any other stream even though it has no associated device node. This is needed for cx18 driver internal use. Also always tell the CX23418 to generate index entries when an analog capture starts and the IDX stream has had buffers allocated (i.e. is enabled). Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13904): cx18: Fix TS and IDX stream buffer memory leak on module unloadAndy Walls2010-02-262-3/+22
| | | | | | | | Fix a long standing memory leak of stream buffers for streams that did not have a struct video_device allocated: namely the TS and IDX streams. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13903): cx18: Encapsulate check for a stream being enabled into an ↵Andy Walls2010-02-261-4/+9
| | | | | | | inline function Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13902): cx18: Update MPEG Index stream buffers module option processingAndy Walls2010-02-262-9/+38
| | | | | | | | | | | | | | | | Update the module options related to INDEX stream buffer allocation. A single CX2341[5678] index entry is only 24 bytes. Large buffers for the IDX stream will prevent the CX23418 from transferring index data over at all. Buffers of around 1.5 kB or 64 index entries seem to be just fine. We'll default to 63 buffers/MDLs as that is the firmware limit per stream and IDX stream buffers are not high rate. There is no reason on earth to allocate the previous 1 MB default of buffer space for the IDX stream. This is in anticipation of implementing the G_ENC_INDEX ioctl() in the cx18 driver. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13555): v4l: Use video_device_node_name() instead of the minor numberLaurent Pinchart2009-12-161-2/+2
| | | | | | | | | | | | Instead of using the minor number in kernel log messages, use the device node name as returned by the video_device_node_name() function. This makes debug, informational and error messages easier to understand for end users. [mchehab.redhat.com: removed tm6000 changes as tm6000 is not ready yet for submission even on staging] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13550): v4l: Use the new video_device_node_name functionLaurent Pinchart2009-12-161-10/+10
| | | | | | | | | | Fix all device drivers to use the new video_device_node_name function. This also strips kernel log messages from the "/dev/" prefix, has the device node location is a userspace policy decision unknown to the kernel. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* Merge branch 'for_linus' of ↵Linus Torvalds2009-12-0919-244/+666
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (345 commits) V4L/DVB (13542): ir-keytable: Allow dynamic table change V4L/DVB (13541): atbm8830: replace 64-bit division and floating point usage V4L/DVB (13540): ir-common: Cleanup get key evdev code V4L/DVB (13539): ir-common: add __func__ for debug messages V4L/DVB (13538): ir-common: Use a dynamic keycode table V4L/DVB (13537): ir: Prepare the code for dynamic keycode table allocation V4L/DVB (13536): em28xx: Use the full RC5 code on HVR-950 Remote Controller V4L/DVB (13535): ir-common: Add a hauppauge new table with the complete RC5 code V4L/DVB (13534): ir-common: Remove some unused fields/structs V4L/DVB (13533): ir: use dynamic tables, instead of static ones V4L/DVB (13532): ir-common: Add infrastructure to use a dynamic keycode table V4L/DVB (13531): ir-common: rename the debug routine to allow exporting it V4L/DVB (13458): go7007: subdev conversion V4L/DVB (13457): s2250: subdev conversion V4L/DVB (13456): s2250: Change module structure V4L/DVB (13528): em28xx: add support for em2800 VC211A card em28xx: don't reduce scale to half size for em2800 em28xx: don't load audio modules when AC97 is mis-detected em28xx: em2800 chips support max width of 640 V4L/DVB (13523): dvb-bt8xx: fix compile warning ... Fix up trivial conflicts due to spelling fixes from the trivial tree in Documentation/video4linux/gspca.txt drivers/media/video/cx18/cx18-mailbox.h
| * V4L/DVB (13478): cx18: remove bogus init call.Hans Verkuil2009-12-052-8/+7
| | | | | | | | | | | | | | | | | | The cx18 av core implemented an init call for no good reason. It's now turned into an internal function. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * V4L/DVB (13445): cx18: Use per cx18 instance init data for ir-kbd-i2c ↵Andy Walls2009-12-053-15/+16
| | | | | | | | | | | | | | | | | | | | | | instead of const data This change creates per cx18 instances of IR_i2c_init_data for handing over initialization data to ir-kbd-i2c, since that module wants non-const data even though it never modifies the data. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * V4L/DVB (13434): cx18: Bump version number due to significant buffer ↵Andy Walls2009-12-051-1/+1
| | | | | | | | | | | | | | handling changes. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * V4L/DVB (13433): cx18: Remove duplicate list traversal when processing ↵Andy Walls2009-12-052-32/+8
| | | | | | | | | | | | | | | | | | | | incoming MDLs Update the incoming MDL's buffers' bytesused and sync the buffers for the cpu in one pass instead of two. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * V4L/DVB (13432): cx18: Adjust encoder VBI MDL size to be exactly frame's ↵Andy Walls2009-12-053-4/+17
| | | | | | | | | | | | | | worth of VBI data Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * V4L/DVB (13431): cx18: Adjust an MDL's final buffer size to force encoder ↵Andy Walls2009-12-051-3/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | transfer size The encoder was not honoring the MDL size sent in DE_SET_MDL mailbox commands. This change adjusts the size of the last buffer in an MDL, as reported to the firmware, so that the encoder will send the exact amount of bytes we specify per MDL transfer. This eliminates tearing in YUV playback when using non-default YUV buffer sizes. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * V4L/DVB (13430): cx18: Fix YUV capture so that encoder passes a single frame ↵Andy Walls2009-12-055-22/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | per transfer Fix YUV capture such that the encoder will pass one frame per transfer. This will allow the application to maintain frame alignment when a transfer from the encoder is missed due to high system latency in service the CX23418 IRQ. Also force YUV buffer sizes to be specified in multiples of 33.75 kB, the smalled amount of buffer sizes need to store a complete set of HM12 4:2:0 macroblocks specifying 32 lines of the frame. A full 60Hz/525 line screen requires 15 * 33.75 kB per frame and a full 50Hz/625 line screen requires 18 * 33.75 kB per frame so the default buffer size is 3 * 33.75 kB, requiring exactly 5 or 6 buffers per MDL respectively. The bytes needed per frame and hence MDL need not be the bytes in an integer number of buffers. However, if frame artifacts are seen with scaled screen sizes, the YUV buffer size can be set 34 kB (33.75 kB) to get rid of the artifacts at the cost of more copies between the kernel and userspace. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * V4L/DVB (13429): cx18: Add Memory Descriptor List (MDL) layer to buffer handlingAndy Walls2009-12-0512-173/+540
| | | | | | | | | | | | | | | | Add a Memory Descriptor List (MDL) layer to buffer handling to implement scatter-gather I/O. Currently there is still only 1 buffer per MDL. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * V4L/DVB (13428): cx18: Rename mdl_offset to mdl_base_idx or free_mdl_idx as ↵Andy Walls2009-12-053-7/+7
| | | | | | | | | | | | | | appropriate Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * V4L/DVB (13427): cx18: Rename struct cx18_queue.buffers to struct ↵Andy Walls2009-12-055-15/+15
| | | | | | | | | | | | | | cx18_queue.depth Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * V4L/DVB (13426): cx18: Rename struct cx18_mdl to struct cx18_mdl_entAndy Walls2009-12-053-4/+4
| | | | | | | | | | | | | | | | Rename type in anticipation of implementing a struct cx18_mdl type that actually keeps track of a memory descriptor list. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * V4L/DVB (13331): mxl5005s: provide ability to override QAM gain for HVR-1600Devin Heitmueller2009-12-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The HVR-1600 doesn't use the standard mechanism for computing the gain when in QAM mode, instead always forcing it to be 0x02. Provide the ability to override the algorithm on a per-board basis. This change results in an improvement of 0.4-0.6 dB for QAM tuning. This work was sponsored by ONELAN Limited. Cc: Steven Toth <stoth@kernellabs.com> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * V4L/DVB (13329): s5h1409: provide HVR-1600 specific optimizationsDevin Heitmueller2009-12-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Perform some optimization of the register configuration based on a trace of the HVR-1600 Windows i2c traffic (and consultation with Steven Toth). Note that some of these values may be able to be moved into the common driver, but I am holding off on that until they can be tested with other boards. This work was sponsored by ONELAN Limited. Cc: Steven Toth <stoth@kernellabs.com> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * V4L/DVB (13288): adding __init/__exit macros to various driversPeter Huewe2009-12-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Trivial patch which adds the __init/__exit macros to the module_init/ module_exit functions of the following drivers in media video: drivers/media/video/ivtv/ivtv-driver.c drivers/media/video/cx18/cx18-driver.c drivers/media/video/davinci/dm355_ccdc.c drivers/media/video/davinci/dm644x_ccdc.c drivers/media/video/saa7164/saa7164-core.c drivers/media/video/saa7134/saa7134-core.c drivers/media/video/cx23885/cx23885-core.c Cc: Hermann Pitton <hermann-pitton@arcor.de> Acked-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Acked-by: Andy Walls <awalls@radix.net> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Muralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* | tree-wide: fix misspelling of "definition" in commentsAdam Buchbinder2009-12-042-2/+2
| | | | | | | | | | | | | | | | "Definition" is misspelled "defintion" in several comments; this patch fixes them. No code changes. Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | media/video: add __init/__exit macros to various driversPeter Huewe2009-11-091-2/+2
|/ | | | | | | | | | | | | | | | | | | Trivial patch which adds the __init/__exit macros to the module_init/ module_exit functions of the following drivers in media video: drivers/media/video/ivtv/ivtv-driver.c drivers/media/video/cx18/cx18-driver.c drivers/media/video/davinci/dm355_ccdc.c drivers/media/video/davinci/dm644x_ccdc.c drivers/media/video/saa7164/saa7164-core.c drivers/media/video/saa7134/saa7134-core.c drivers/media/video/cx23885/cx23885-core.c Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Acked-by: Andy Walls <awalls@radix.net> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Muralidharan Karicheri <m-karicheri2@ti.com> Acked-By: Steven Toth <stoth@kernellabs.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* V4L/DVB (12725): v4l: warn when desired devnodenr is in use & add _no_warn ↵Hans Verkuil2009-09-191-1/+1
| | | | | | | | | | | function Warn when the desired device node number is already in use, except when the new video_register_device_no_warn function is called since in some use-cases that warning is not relevant. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12723): ivtv/cx18: replace 'kernel number' with 'device node number'.Hans Verkuil2009-09-192-2/+2
| | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12540): v4l: simplify v4l2_i2c_new_subdev and friendsHans Verkuil2009-09-191-7/+7
| | | | | | | | | | Rewrite v4l2_i2c_new_subdev as a simplified version of v4l2_i2c_new_subdev_cfg and remove v4l2_i2c_new_probed_subdev and v4l2_i2c_new_probed_subdev_addr. This simplifies this API substantially. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12884): cx18: Eliminate warning about discarding 'const' is ↵Andy Walls2009-09-191-1/+1
| | | | | | | | | | | assignment for IR init i2c-kbd-i2c allows a bridge driver to pass information about IR configuration, but uses a "void *" to pass along what is essentially constant data. This change casts a const * to a void * to remove the warning. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12699): cx18: ir-kbd-i2c initialization data should point to a ↵Andy Walls2009-09-121-7/+8
| | | | | | | | | | | | | | | | | | persistent object ir-kbd-i2c's ir_probe() function can be called much later (i.e. at ir-kbd-i2c module load), than the lifetime of a struct IR_i2c_init_data allocated off of the stack in cx18_i2c_new_ir() at registration time. Make sure we pass a pointer to a persistent IR_i2c_init_data object at i2c registration time. Thanks to Brian Rogers for pointing out a solution, and Dustin Mitchell for testing against a 2.6.30 kernel. Reported-by: Dustin Mitchell <soxslayer@gmail.com> Reported-by: Brian Rogers <brian@xyzw.org> Tested-by: Dustin Mitchell <soxslayer@gmail.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12595): common/ir: use a struct for keycode tablesMauro Carvalho Chehab2009-09-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, V4L uses a scancode table whose index is the scancode and the value is the keycode. While this works, it has some drawbacks: 1) It requires that the scancode to be at the range 00-7f; 2) keycodes should be masked on 7 bits in order for it to work; 3) due to the 7 bits approach, sometimes it is not possible to replace the default keyboard to another one with a different encoding rule; 4) it is different than what is done with dvb-usb approach; 5) it requires a typedef for it to work. This is not a recommended Linux CodingStyle. This patch is part of a larger series of IR changes. It basically replaces the IR_KEYTAB_TYPE tables by a structured table: struct ir_scancode { u16 scancode; u32 keycode; }; This is very close to what dvb does. So, a further integration with DVB code will be easy. While we've changed the tables, for now, the IR keycode handling is still based on the old approach. The only notable effect is the redution of about 35% of the ir-common module size: text data bss dec hex filename 6721 29208 4 35933 8c5d old/ir-common.ko 5756 18040 4 23800 5cf8 new/ir-common.ko In thesis, we could be using above u8 for scancode, reducing even more the size of the module, but defining it as u16 is more convenient, since, on dvb, each scancode has up to 16 bits, and we currently have a few troubles with rc5, as their scancodes are defined with more than 8 bits. This patch itself shouldn't be doing any functional changes. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12367): cx18: Add i2c initialization for Z8F0811/Hauppage IR ↵Andy Walls2009-09-123-17/+64
| | | | | | | | | | | | | transceivers This patch add support to the cx18 driver for setting up the Z8F0811/Hauppauge IR Tx/Rx chip with the i2c binding model in newer kernels. Signed-off-by: Andy Walls <awalls@radix.net> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12343): Stop defining I2C adapter IDs nobody usesJean Delvare2009-09-121-1/+0
| | | | | | | | | There is no point in defining I2C adapter IDs when no code is using them. As this field might go away in the future, stop using it when we don't need to. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12207): cx18: Add an EEPROM dump routine for the Yuan MPC718 and ↵Andy Walls2009-09-122-3/+40
| | | | | | | | | | future cards Add a routine for dumping the EEPROM of the MPC718. It is generic enough to use for other cards in the future that may have an EEPROM. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12199): remove redundant tests on unsignedRoel Kluin2009-09-121-1/+1
| | | | | | | | | | input, inp and i are unsigned. When negative they are wrapped and caught by the other test. Cc: Andy Walls <awalls@radix.net> Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12196): cx18-fileops.c: Remove unnecessary semicolonsJoe Perches2009-09-121-1/+1
| | | | | | | Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Andy Walls <awalls@radix.net> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12338): cx18: Read buffer overflowAndy Walls2009-08-131-1/+2
| | | | | | | | | This mistakenly tested against sizeof(freqs) instead of the array size. Due to the mask the only illegal value possible was 3. Reported-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12182): cx18: Add DVB-T support for Yuan MPC-718 cards with an ↵Andy Walls2009-07-052-2/+162
| | | | | | | | | | | | | | | | | | MT352 or ZL10353 Add DVB-T support for Yuan MPC-718 cards with an MT352 or ZL10353 demodulator. There are apparently some units with a DiBcom demodulator which could be supported by one of the dib7000 modules - but this is not implemented in the cx18 driver (yet). Due to lack of porgramming details for the MT352 and the mt352 module requiring a "demod_init" function, a "firmware" must be obtained and loaded to get DVB-T working for Yuan MPC-718 cards with an MT352. Tested-by: Steve Firth <firth650@btinternet.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12180): cx18: Update Yuan MPC-718 card entry with better ↵Andy Walls2009-07-051-12/+22
| | | | | | | information and guesses Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12104): ivtv/cx18: fix regression: class controls are no longer seenHans Verkuil2009-06-231-0/+2
| | | | | | | | | | | | A previous change (v4l2-common: remove v4l2_ctrl_query_fill_std) broke the handling of class controls in VIDIOC_QUERYCTRL. The MPEG class control was broken for all drivers that use the cx2341x module and the USER class control was broken for ivtv and cx18. This change adds back proper class control support. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11951): cx18: Add DVB-T support for the Leadtek WinFast DVR3100 HAndy Walls2009-06-162-14/+57
| | | | | | | | | | | | | | | | | | This adds support for DVB-T on the Leadtek DVR3100 H and should also get analog TV capture from the tuner working properly as well. DVB-T 6 MHz and 8 MHz have been tested and verified to work by Terry Wu of Leadtek. DVB-T 7 MHz has also been verified working with a change developed by Terry to the tuner-xc2028.c driver. Special thanks go to Terry Wu <terrywu2009@gmail.com> of Leadtek who provided the needed information and testing to get digital TV working for the Leadtek DVR3100 H. Reported-by: Terry Wu <terrywu2009@gmail.com> Tested-by: Terry Wu <terrywu2009@gmail.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11950): cx18: Split LeadTek PVR2100 and DVR3100 H into 2 separate ↵Andy Walls2009-06-163-6/+63
| | | | | | | card entries Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11898): cx18: Perform 64 bit divide so it works for 32 bit systemsAndy Walls2009-06-161-1/+4
| | | | | | | | | | | | Thanks to David Ward and Mike Krufky for reporting the problem and debugging this as an unresolved symbol due to a 64 bit divide on a 32 bit system. David Ward provided the content of this patch; Andy Walls only performed some cosmetic edits. Reported-by: David Ward <david.ward@gatech.edu> Signed-off-by: David Ward <david.ward@gatech.edu> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11865): cx18: Tweak color burst gate delay and initial color ↵Andy Walls2009-06-161-21/+48
| | | | | | | | | | | | | | sub-carrier freq Fix the burst gate delays to use a crystal value of 28636360 as assumed by the rest of the driver. Also have the initial color sub-carrier freq paramter use the src decimation ratio per the documentation, instead of the actual crystal/pixel clock ratio. The tracking circuit will find the correct color subcarrier in any case, as long as we're close. Also fix up some debug print statements. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11864): cx18: Complete support for Sliced and Raw VBI for 625 line ↵Andy Walls2009-06-163-14/+24
| | | | | | | | | | systems Finish changes for sliced and raw VBI for 625 line systems. Tested with VPS and WSS being emitted by a PVR-350 in field 1 lines 16 and 23. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11863): cx18: Initial attempt to get sliced VBI working for 625 ↵Andy Walls2009-06-163-15/+56
| | | | | | | | | | line systems Initial changes to get sliced VBI for 625 line system working. This is patch is untested. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit (git 2.34.1) at 2025-01-20 05:30:20 +0000