summaryrefslogtreecommitdiffstats
path: root/drivers/gpu
Commit message (Collapse)AuthorAgeFilesLines
* drm/i915: framebuffer compression for pre-GM45Jesse Barnes2009-09-105-19/+382
| | | | | | | | | | | | | | | This patch adds framebuffer compression (good for about ~0.5W power savings in the best case) support for pre-GM45 chips. GM45+ have a new, more flexible FBC scheme that will be added in a separate patch. FBC can't always be enabled: the compressed buffer must be physically contiguous and reside in stolen space. So if you have a large display and a small amount of stolen memory, you may not be able to take advantage of FBC. In some cases, a BIOS setting controls how much stolen space is available. Increasing this to 8 or 16M can help. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: generate a KMS uevent at lid open/close timeJesse Barnes2009-09-101-0/+2
| | | | | | | | | | With all the other lid pieces in place, it's easy to generate a uevent for the LVDS connector just like we do for other outputs. Should make lid open/close fit in with the rest of a userland based output reconfiguration scheme. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: use ACPI LID status for LVDS ->detect hookJesse Barnes2009-09-101-3/+9
| | | | | | | | | | | We can't load or hotplug detect LVDS like we can other outputs, but if there's a lid device present we can use it as a proxy. This allows the LFP state to be determined at ->detect time, making configurations requiring manual intervention today "just work" assuming the lid device status is correct. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: force mode set at lid open timeJesse Barnes2009-09-104-0/+28
| | | | | | | | | | | | Some laptop platforms will disable pipes and/or planes at lid close time and not restore them when the lid is opened again. So catch the lid event, and if the lid was opened, force a mode restore. Fixes fdo bug #21230. Acked-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
* Add G33 series in VGA hotplug support categoryLi Peng2009-09-101-1/+1
| | | | | | | Test on the IGD chip, which is a G33-like graphic device. Signed-off-by: Li Peng <peng.li@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: Write zero to DPLL_MD Reg for non-SDVO outputZhao Yakui2009-09-101-2/+5
| | | | | | | | | | | | | When the output device is LVDS, maybe the pixel clock of adjusted_mode will be less than that in mode. In such case it will set the incorrect multipler factor in DPLL_MD register. So the dpll_md_reg will be reset when the output type is non-SDVO https://bugs.freedesktop.org/show_bug.cgi?id=22761 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Reviewd-by: Eric Anholt <eric@anholt.net> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: Add the missing clone_mask for SDVO-VGA(RGB1)Zhao Yakui2009-09-101-0/+2
| | | | | | | Add the missing clone_mask for SDVO-VGA(RGB1) Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: Add the brightness property for SDVO-LVDSZhao Yakui2009-09-101-6/+8
| | | | | | | | | | When the sdvo device is detected as SDVO-LVDS, we will check whether the brightness is supported by issue SDVO enhancement command. If it is supported, we will add the brightness property and then brightness can be adjusted. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: Add the enhancement property for SDVO-TVZhao Yakui2009-09-101-5/+495
| | | | | | | | | | | | | | | | | | When the sdvo device is detected as SDVO-TV, we will check whether the sepecific picture enhancement is supported. If it is supported, we will add the corresponnding property for SDVO-TV. We will add the following property for the SDVO-TV enhancements if they are supported: * Contrast/Brightness/Saturation/Hue. * left/right/top/bottom margin: This is implemented by using the horizontal/vertical overscan enhancements. When the overscan enhancements are supported, the above properties will be added. This is to be compatible with what we have done in integrated-TV. * horizontal pos/vertical pos. http://bugs.freedesktop.org/show_bug.cgi?id=22891 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: Zap mmaps of objects before unbinding them from the GTT.Eric Anholt2009-09-091-8/+8
| | | | | | | | | Otherwise, some other userland writing into its buffer may race to land writes either after the CPU thinks it's got a coherent view, or after its GTT entries have been redirected to point at the scratch page. Either result is unpleasant. Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: add B43 chipset supportFabian Henze2009-09-081-0/+2
| | | | | | Signed-off-by: Fabian Henze <hoacha@quantentunnel.de> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/radeon/r600: use fence->timeout directlyAlex Deucher2009-09-091-10/+1
| | | | | | | Fixes fence timeouts on r6xx/r7xx. Noticed by taiu on IRC. Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
* drm/radeon/kms: re-apply 2007d633d639c896396e4c4b53b38068f3831307Alex Deucher2009-09-091-2/+8
| | | | | | | Got accidently reverted by c93bb85b5cba3e3a06f2cad8e9bc5c23d3d10aac Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
* drm/radeon/kms: don't allow ERESTART to hit userspace.Dave Airlie2009-09-081-3/+7
| | | | | | | the pre-r600 fence code returns ebusy if we get hit by a signal so we should continue to do that. Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm: prune modes when output is disconnected.Adam Jackson2009-09-081-2/+2
| | | | | | | | | | When an output was disconnected, its mode list would remain. If you later plugged into a sink with no EDID (projector, etc), you'd inherit the mode list from the old sink, which is not what you want. taken from Fedora kernel Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm: shut the EDID warnings up.Adam Jackson2009-09-081-3/+0
| | | | | | | | These really aren't all that useful. taken from Fedora kernel. Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/i915: get the bridge device once.Dave Airlie2009-09-083-55/+44
| | | | | | | | | The driver gets the bridge device in a number of places, upcoming vga arb code paths need the bridge device, however they need it in under a lock, and the pci lookup can allocate memory. So clean this code up before then and get the bridge once for the driver lifetime. Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms: lower debugging on dpms events.Dave Airlie2009-09-081-7/+6
| | | | | | Lower the debugging on encoders when getting DPMS events. Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/kms/radeon: make kms default a runtime optionDave Airlie2009-09-084-17/+12
| | | | | | | This makes the kms/enable disable a runtime not a build time option. Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/kms: fix kms helper license + KconfigDave Airlie2009-09-084-7/+11
| | | | | | | Allow the KMS module to work properly, and also rename it to KMS_HELPER so its clearer what its for. Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms: add r600 KMS supportJerome Glisse2009-09-0833-606/+8289
| | | | | | | | | | | | | | | | | | | | This adds the r600 KMS + CS support to the Linux kernel. The r600 TTM support is quite basic and still needs more work esp around using interrupts, but the polled fencing should work okay for now. Also currently TTM is using memcpy to do VRAM moves, the code is here to use a 3D blit to do this, but isn't fully debugged yet. Authors: Alex Deucher <alexdeucher@gmail.com> Dave Airlie <airlied@redhat.com> Jerome Glisse <jglisse@redhat.com> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms: add initial radeon tv-out support.Dave Airlie2009-09-0815-388/+1941
| | | | | | | | This ports the tv-out code from the DDX to KMS. adds a radeon.tv module option, radeon.tv=0 to disable tv Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms: add rn50/r100/r200 CS tracker.Dave Airlie2009-09-0811-440/+1712
| | | | | | | | | | This adds the command stream checker for the RN50, R100 and R200 cards. It stops any access to 3D registers on RN50, and does checks on buffer sizes on the r100/r200 cards. It also fixes some texture sizing checks on r300. Signed-off-by: Dave Airlie <airlied@redhat.com>
* Merge intel drm-intel-next branchDave Airlie2009-09-0733-321/+1474
|\ | | | | | | | | | | | | | | | | Merge remote branch 'anholt/drm-intel-next' of ../anholt-2.6 into drm-next Conflicts: drivers/gpu/drm/i915/intel_display.c drivers/gpu/drm/i915/intel_drv.h drivers/gpu/drm/i915/intel_sdvo.c
| * drm/i915: Put the idle reclocking work on our private workqueue as well.Eric Anholt2009-09-061-2/+2
| | | | | | | | | | | | Fixes (again) whole-system lockups due to GPU lockups. Signed-off-by: Eric Anholt <eric@anholt.net>
| * drm/i915: Pad ringbuffer with NOOPs before wrappingChris Wilson2009-09-064-27/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the docs, the ringbuffer is not allowed to wrap in the middle of an instruction. G45 PRM, Vol 1b, p101: While the “free space” wrap may allow commands to be wrapped around the end of the Ring Buffer, the wrap should only occur between commands. Padding (with NOP) may be required to follow this restriction. Do as commanded. [Having seen bug reports where there is evidence of split commands, but apparently the GPU has continued on merrily before a bizarre and untimely death, this may or may not fix a few random hangs.] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> CC: Eric Anholt <eric@anholt.net> Signed-off-by: Eric Anholt <eric@anholt.net>
| * drm/i915: do dynamic clock freq control only in kernel modesettingZhenyu Wang2009-09-041-0/+3
| | | | | | | | | | Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| * drm/I915: Use the CRT DDC to get the EDID for DVI-connector on MacKeith Packard2009-09-041-22/+74
| | | | | | | | | | | | | | | | | | | | | | mac Mini's have a single DDC line on the DVI connector, shared between the analog link and the digital link. So, if DDC isn't detected on GPIOE (the usual SDVO DDC link), try GPIOA (the usual VGA DDC link) when there isn't a VGA monitor connected. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| * drm/i915: fix tiling on IGDNGZhenyu Wang2009-09-043-8/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | It seems that on IGDNG the same swizzling setup always applys. And front buffer tiling needs to set address swizzle in display arb control too. Fix plane tricle feed setting in v1 which should be disable bit, and always setup address swizzle to let hardware care for buffer tiling in all cases. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| * drm/i915: modeset: always set intel_crtc->dpms_mode by moving the assignment up.Daniel Vetter2009-09-041-2/+2
| | | | | | | | | | Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Eric Anholt <eric@anholt.net>
| * drm/i915: remove open-coded drm_mode_object_findDaniel Vetter2009-09-041-12/+8
| | | | | | | | | | | | | | | | And clean up a small whitespace goof-up in the same function, while I was looking at it. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Eric Anholt <eric@anholt.net>
| * drm/i915: Make the downclocking debug code be under DRM_DEBUG not DRM_ERROR.Eric Anholt2009-09-041-2/+2
| | | | | | | | | | Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * drm/i915: i915_modeset is signedKyle McMartin2009-09-041-1/+1
| | | | | | | | | | Signed-off-by: Kyle McMartin <kyle@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| * drm/i915: add dynamic clock frequency controlJesse Barnes2009-09-049-45/+704
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are several sources of unnecessary power consumption on Intel graphics systems. The first is the LVDS clock. TFTs don't suffer from persistence issues like CRTs, and so we can reduce the LVDS refresh rate when the screen is idle. It will be automatically upclocked when userspace triggers graphical activity. Beyond that, we can enable memory self refresh. This allows the memory to go into a lower power state when the graphics are idle. Finally, we can drop some clocks on the gpu itself. All of these things can be reenabled between frames when GPU activity is triggered, and so there should be no user visible graphical changes. Signed-off-by: Jesse Barnes <jesse.barnes@intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| * drm/i915: Support IGD EOSShaohua Li2009-09-043-0/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the event that any one of the DAC analog outputs (R,G,B) were driven at full-scale (white video) or some analog level close to full-scale voltage, and if the video cable were then disconnected, the analog video voltage level would exceed the maximum electrical overstress limit of the native (thin-oxide) transistors thus causing a long-term reliability concern. The electrical overstress condition occurs in this particular case. This patch address the IGD EOS (electrical overstress condition) issue. When the EOS interrupt occurs, OS should disable DAC and then disable EOS, then the normal hotplug operation follows. TODO: it appears the normal unplug interrupt is missed as reported by Li Peng, need more checks here. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| * drm/i915: Enable PAL and SECAM format and add the propery for SDVO-TVZhao Yakui2009-09-041-48/+153
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently SDVO TV only support NTSC-M format. In this patch we introduce PAL and SECAM formats available and create seting-format property at init time. When user dynamically chose preferred format by xrandr command, it will refine all modelines provided by SDVO device, then instruct SDVO device to execute. At the same time the property is added for SDVO-TV so that the SDVO-TV mode can be changed by using xrandr. https://bugs.freedesktop.org/show_bug.cgi?id=22891 Signed-off-by: Ma Ling <ling.ma@intel.com> review-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| * drm/i915: select TV format according to connector typeMa Ling2009-09-041-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | For integrated TV there are 3 connector types: S-VIDEO, Composite and Component(YprPb). Those tv formats whose component flag is true should be assigned to Component connector, others are for S-VIDEO and Composite. The patch intends to find appropriate tv format for each connector. In such case it will return the correct modeline to user space. Otherwise it will return the incorrect modeline when S-video/composite is connected. Signed-off-by: Ma Ling <ling.ma@intel.com> reviewed-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| * drm/i915: update debugfs interrupt info on IGDNGZhenyu Wang2009-09-041-10/+31
| | | | | | | | | | Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| * drm/i915: Add i915 register dumping debugfs fileBen Gamari2009-09-041-0/+30
| | | | | | | | | | | | | | | | | | Add a debugfs file to dump the entire register range. Here we assume that reading write-only/reserved registers won't make the chip angry. Seems to hold true, thankfully. Signed-off-by: Ben Gamari <bgamari.foss@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| * drm/i915: Move i915_gem_debugfs.c to i915_debugfs.cBen Gamari2009-09-044-13/+13
| | | | | | | | | | | | Signed-off-by: Ben Gamari <bgamari.foss@gmail.com> [anholt: hand-applied for conflicts] Signed-off-by: Eric Anholt <eric@anholt.net>
| * drm/i915: Unref old_obj on get_fence_reg() error pathChris Wilson2009-09-021-4/+9
| | | | | | | | | | | | | | | | | | | | | | Remember to release the local reference if we fail to wait on the rendering. (Also whilst in the vicinity add some whitespace so that the phasing of the operations is clearer.) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
| * drm/i915: increase default latency constant (v2 w/comment)Jesse Barnes2009-09-021-1/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some i915/i945 platforms have a fairly high memory latency in certain situations, so increase our constant a bit to avoid FIFO underruns. The effect should be positive on other platforms as well; we'll have a bit more insurance against a busy memory subsystem due to the extra FIFO entries. Fixes fdo bug #23368. Needed for 2.6.31. Tested-by: Sven Arvidsson <sa@whiz.se> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
| * Merge branch 'for-linus' of ↵Linus Torvalds2009-08-3112-105/+194
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: Improve CRTDDC mapping by using VBT info drm/i915: Fix CPU-spinning hangs related to fence usage by using an LRU. drm/i915: Set crtc/clone mask in different output devices drm/i915: Always use SDVO_B detect bit for SDVO output detection. drm/i915: Fix typo that broke SVID1 in intel_sdvo_multifunc_encoder() drm/i915: Check if BIOS enabled dual-channel LVDS on 8xx, not only on 9xx drm/i915: Set the multiplier for SDVO on G33 platform
| | * drm/i915: Improve CRTDDC mapping by using VBT infoDavid Müller (ELSOFT AG)2009-08-293-4/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use VBT information to determine which DDC bus to use for CRTDCC. Fall back to GPIOA if VBT info is not available. Signed-off-by: David Müller <d.mueller@elsoft.ch> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Tested on: 855 (David), and 945GM, 965GM, GM45, and G45 (anholt)
| | * drm/i915: Fix CPU-spinning hangs related to fence usage by using an LRU.Eric Anholt2009-08-292-38/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The lack of a proper LRU was partially worked around by taking the fence from the object containing the oldest seqno. But if there are multiple objects inactive, then they don't have seqnos and the first fence reg among them would be chosen. If you were trying to copy data between two mappings, this could result in each page fault stealing the fence from the other argument, and your application hanging. https://bugs.freedesktop.org/show_bug.cgi?id=23566 https://bugs.freedesktop.org/show_bug.cgi?id=23220 https://bugs.freedesktop.org/show_bug.cgi?id=23253 https://bugs.freedesktop.org/show_bug.cgi?id=23366 Cc: Stable Team <stable@kernel.org> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
| | * drm/i915: Set crtc/clone mask in different output devicesMa Ling2009-08-249-51/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on Bspec each encoder has different sharing pipe property, i.e. Integrated or SDVO TV both will occupy one pipe exclusively, and sdvo-non-tv and crt are allowed to share one. The patch moves sharing judgment into differnet output functions, and sets the right clone bit. This fixes both HDMI outputs choosing the same pipe. https://bugs.freedesktop.org/show_bug.cgi?id=22247 Signed-off-by: Ma Ling <ling.ma@intel.com> Reviewed-by : Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| | * drm/i915: Always use SDVO_B detect bit for SDVO output detection.Ma Ling2009-08-241-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After the following commit is shipped, the SDVO C detection will depend on the SDVO_C/DP detion bit. commit 13520b051e8888dd3af9bda639d83e7df76613d1 Author: Kristian Høgsberg <krh@redhat.com> Date: Fri Mar 13 15:42:14 2009 -0400 drm/i915: Read the right SDVO register when detecting SVDO/HDMI. According to the spec we should continue to detect the SDVO_B/C based on the SDVO_B detection bit. The new detection bit on G4X platform is for the HDMI_C detection rather than SDVO_C detection. https://bugs.freedesktop.org/show_bug.cgi?id=20639 Signed-off-by: Ma Ling <ling.ma@intel.com> Acked-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| | * drm/i915: Fix typo that broke SVID1 in intel_sdvo_multifunc_encoder()Roel Kluin2009-08-241-1/+1
| | | | | | | | | | | | | | | | | | | | | Bit SDVO_OUTPUT_SVID0 was tested twice Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| | * drm/i915: Check if BIOS enabled dual-channel LVDS on 8xx, not only on 9xxBruno Prémont2009-08-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 0c2e39525b3b53a97a0202c5f35058147e53977e is not sufficient to get fd.o bug #20115 fixed. In addition intel_find_best_PLL() must not only rely on BIOS settings for i9xx chips but also for i8xx, so drop the IS_I9XX() check. Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Eric Anholt <eric@anholt.net>
| | * drm/i915: Set the multiplier for SDVO on G33 platformSean Young2009-08-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | http://bugs.freedesktop.org/show_bug.cgi?id=21417 Signed-off-by: Sean Young <sean@mess.org> Reviewed-by: Zhao Yakui <yakui.zhao@intel.com> Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
generated by cgit (git 2.34.1) at 2024-10-01 17:31:42 +0000