summaryrefslogtreecommitdiffstats
path: root/drivers/firmware/dmi_scan.c
Commit message (Collapse)AuthorAgeFilesLines
* dmi: Let dmi_walk() users pass private dataJean Delvare2009-03-301-7/+11
| | | | | | | | | | | At the moment, dmi_walk() lacks flexibility, users can't pass data to the callback function. Add a pointer for private data to make this function more flexible. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Roland Dreier <rolandd@cisco.com>
* DMI: Introduce dmi_first_match to make the interface more flexibleRafael J. Wysocki2009-01-271-19/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Some notebooks from HP have the problem that their BIOSes attempt to spin down hard drives before entering ACPI system states S4 and S5. This leads to a yo-yo effect during system power-off shutdown and the last phase of hibernation when the disk is first spun down by the kernel and then almost immediately turned on and off by the BIOS. This, in turn, may result in shortening the disk's life times. To prevent this from happening we can blacklist the affected systems using DMI information. However, only the on-board controlles should be blacklisted and their PCI slot numbers can be used for this purpose. Unfortunately the existing interface for checking DMI information of the system is not very convenient for this purpose, because to use it, we would have to define special callback functions or create a separate struct dmi_system_id table for each blacklisted system. To overcome this difficulty introduce a new function dmi_first_match() returning a pointer to the first entry in an array of struct dmi_system_id elements that matches the system DMI information. Then, we can use this pointer to access the entry's .driver_data field containing the additional information, such as the PCI slot number, allowing us to do the desired blacklisting. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* dmi: fix kernel-doc notationRandy Dunlap2009-01-061-2/+4
| | | | | | | | | | | | Add missing kernel-doc notation: drivers/firmware/dmi_scan.c:475: No description found for parameter 'str' drivers/firmware/dmi_scan.c:592: No description found for parameter 'f' drivers/firmware/dmi_scan.c:592: No description found for parameter 'str' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* DMI: add dmi_matchJiri Slaby2008-12-291-0/+16
| | | | | | | | | | | | | Add a wrapper for testing system_info which will handle also NULL system infos. This will be used by the ata PIIX driver. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Alexandru Romanescu <a_romanescu@yahoo.co.uk> Cc: Tejun Heo <tj@kernel.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
*-. Merge branches 'x86/apic', 'x86/cleanups', 'x86/cpufeature', ↵Ingo Molnar2008-12-231-0/+11
|\ \ | | | | | | | | | 'x86/crashdump', 'x86/debug', 'x86/defconfig', 'x86/detect-hyper', 'x86/doc', 'x86/dumpstack', 'x86/early-printk', 'x86/fpu', 'x86/idle', 'x86/io', 'x86/memory-corruption-check', 'x86/microcode', 'x86/mm', 'x86/mtrr', 'x86/nmi-watchdog', 'x86/pat2', 'x86/pci-ioapic-boot-irq-quirks', 'x86/ptrace', 'x86/quirks', 'x86/reboot', 'x86/setup-memory', 'x86/signal', 'x86/sparse-fixes', 'x86/time', 'x86/uv' and 'x86/xen' into x86/core
| * | x86: vmware: look for DMI string in the product serial keyAlok Kataria2008-11-041-0/+11
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: Should permit VMware detection on older platforms where the vendor is changed. Could theoretically cause a regression if some weird serial number scheme contains the string "VMware" by pure chance. Seems unlikely, especially with the mixed case. In some user configured cases, VMware may choose not to put a VMware specific DMI string, but the product serial key is always there and is VMware specific. Add a interface to check the serial key, when checking for VMware in the DMI information. Signed-off-by: Alok N Kataria <akataria@vmware.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
* / trivial: dmi_scan typoAlan Cox2008-11-071-3/+3
|/ | | | | | | | As we've lost our trivial maintainer for the moment I'll send this directly. Only touches a comment Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* dmi scan: warn about too early calls to dmi_check_system()Ingo Molnar2008-09-181-6/+16
| | | | | | | | | | | It happened to me recently that i added a dmi_check_system() quirk in a too early codepath, and it was silently ignored because all the DMI tables and strings were still empty. As this situation is clearly a programming error / kernel bug, warn when it happens, instead of silently ignoring quirks. Signed-off-by: Ingo Molnar <mingo@elte.hu>
* x86 boot: add header comment to dmi.h stating what it isPaul Jackson2008-05-251-0/+5
| | | | | | | | | The "dmi.h" file did not state anywhere in the file what "DMI" was. For those who know, it's obvious. For the rest of us, I added a brief opening comment. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* ipmi: change device node ordering to reflect probe orderCarol Hebert2008-04-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | In 2.6.14 a patch was merged which switching the order of the ipmi device naming from in-order-of-discovery over to reverse-order-of-discovery. So on systems with multiple BMC interfaces, the ipmi device names are being created in reverse order relative to how they are discovered on the system (e.g. on an IBM x3950 multinode server with N nodes, the device name for the BMC in the first node is /dev/ipmiN-1 and the device name for the BMC in the last node is /dev/ipmi0, etc.). The problem is caused by the list handling routines chosen in dmi_scan.c. Using list_add() causes the multiple ipmi devices to be added to the device list using a stack-paradigm and so the ipmi driver subsequently pulls them off during initialization in LIFO order. This patch changes the dmi_save_ipmi_device() list handling paradigm to a queue, thereby allowing the ipmi driver to build the ipmi device names in the order in which they are found on the system. Signed-off-by: Carol Hebert <cah@us.ibm.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* dmi: prevent linked list corruptionJean Delvare2008-02-231-7/+1
| | | | | | | | | | | | | | | | | | | Adding the same item to a given linked list more than once is guaranteed to break and corrupt the list. This is however what we do in dmi_scan since commit 79da4721117fcf188b4b007b775738a530f574da ("x86: fix DMI out of memory problems"). Given that there is absolutely no interest in saving empty OEM strings anyway, I propose the simple and efficient fix below: we discard the empty OEM strings altogether. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Parag Warudkar <parag.warudkar@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* dmi: don't save the same device twiceJean Delvare2008-02-231-30/+44
| | | | | | | | | | | | Now that we gather on-board devices from both DMI types 10 and 41, there is a possibility that we list the same device twice. In order to not confuse drivers, and also to save memory, make sure that we do not add duplicate devices to the dmi_devices list. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* SMBIOS/DMI: add type 41 = Onboard Devices Extended InformationWim Van Sebroeck2008-02-081-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From version 2.6 of the SMBIOS standard, type 10 (On Board Devices Information) becomes obsolete. The reason for this is that no further fields can be added to this structure without adversely affecting existing software's ability to properly parse the data. Therefore type 41 (Onboard Devices Extended Information) was added. The structure is as follows: struct smbios_type_41 { u8 type; u8 length; u16 handle; u8 reference_designation_string; u8 device_type; /* same device type as in type 10 */ u8 device_type_instance; u16 segment_group_number; u8 bus_number; u8 device_function_number; }; For more info: http://www.dmtf.org/standards/smbios Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: Jean Delvare <khali@linux-fr.org> Cc: Len Brown <lenb@kernel.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* dmi: Let drivers walk the DMI tableJean Delvare2008-02-071-14/+48
| | | | | | | | Let drivers walk the DMI table for their own needs. Some drivers need data stored in OEM-specific DMI records for proper operation. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* DMI: remove duplicate helper routineLen Brown2008-02-031-9/+0
| | | | | | | | Use existing dmi_get_system_info(), Delete duplicate dmi_get_slot() Spotted-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Len Brown <len.brown@intel.com>
* x86: left over fix for leak of early_ioremp in dmi_scanYinghai Lu2008-01-301-0/+1
| | | | | | Signed-off-by: Yinghai Lu <yinghai@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86: fix DMI ioremap leakIngo Molnar2008-01-301-0/+1
| | | | | Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86: fix DMI out of memory problemsParag Warudkar2008-01-301-3/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | People with HP Desktops (including me) encounter couple of DMI errors during boot - dmi_save_oem_strings_devices: out of memory and dmi_string: out of memory. On some HP desktops the DMI data include OEM strings (type 11) out of which only few are meaningful and most other are empty. DMI code religiously creates copies of these 27 strings (65 bytes each in my case) and goes OOM in dmi_string(). If DMI_MAX_DATA is bumped up a little then it goes and fails in dmi_save_oem_strings while allocating dmi_devices of sizeof(struct dmi_device) corresponding to these strings. On x86_64 since we cannot use alloc_bootmem this early, the code uses a static array of 2048 bytes (DMI_MAX_DATA) for allocating the memory DMI needs. It does not survive the creation of empty strings and devices. Fix this by detecting and not newly allocating empty strings and instead using a one statically defined dmi_empty_string. Also do not create a new struct dmi_device for each empty string - use one statically define dmi_device with .name=dmi_empty_string and add that to the dmi_devices list. On x64 this should stop the OOM with same current size of DMI_MAX_DATA and on x86 this should save a good amount of (27*65 bytes + 27*sizeof(struct dmi_device) bootmem. Compile and boot tested on both 32-bit and 64-bit x86. Signed-off-by: Parag Warudkar <parag.warudkar@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* DMI: create dmi_get_slot()Len Brown2008-01-231-0/+8
| | | | | | | This simply allows other sub-systems (such as ACPI) to access and print out slots in static dmi_ident[]. Signed-off-by: Len Brown <len.brown@intel.com>
* drivers/firmware: const-ify DMI API and internalsJeff Garzik2007-10-091-26/+31
| | | | | | | | | | | | | | | | | | | | | | | Three main sets of changes: 1) dmi_get_system_info() return value should have been marked const, since callers should not be changing that data. 2) const-ify DMI internals, since DMI firmware tables should, whenever possible, be marked const to ensure we never ever write to that data area. 3) const-ify DMI API, to enable marking tables const where possible in low-level drivers. And if we're really lucky, this might enable some additional optimizations on the part of the compiler. The bulk of the changes are #2 and #3, which are interrelated. #1 could have been a separate patch, but it was so small compared to the others, it was easier to roll it into this changeset. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* DMI-based module autoloadingLennart Poettering2007-07-111-6/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch below adds DMI/SMBIOS based module autoloading to the Linux kernel. The idea is to load laptop drivers automatically (and other drivers which cannot be autoloaded otherwise), based on the DMI system identification information of the BIOS. Right now most distros manually try to load all available laptop drivers on bootup in the hope that at least one of them loads successfully. This patch does away with all that, and uses udev to automatically load matching drivers on the right machines. Basically the patch just exports the DMI information that has been parsed by the kernel anyway to userspace via a sysfs device /sys/class/dmi/id and makes sure that proper modalias attributes are available. Besides adding the "modalias" attribute it also adds attributes for a few other DMI fields which might be useful for writing udev rules. This patch is not an attempt to export the entire DMI/SMBIOS data to userspace. We already have "dmidecode" which parses the complete DMI info from userspace. The purpose of this patch is machine model identification and good udev integration. To take advantage of DMI based module autoloading, a driver should export one or more MODULE_ALIAS fields similar to these: MODULE_ALIAS("dmi:*:svnMICRO-STARINT'LCO.,LTD:pnMS-1013:pvr0131*:cvnMICRO-STARINT'LCO.,LTD:ct10:*"); MODULE_ALIAS("dmi:*:svnMicro-StarInternational:pnMS-1058:pvr0581:rvnMSI:rnMS-1058:*:ct10:*"); MODULE_ALIAS("dmi:*:svnMicro-StarInternational:pnMS-1412:*:rvnMSI:rnMS-1412:*:cvnMICRO-STARINT'LCO.,LTD:ct10:*"); MODULE_ALIAS("dmi:*:svnNOTEBOOK:pnSAM2000:pvr0131*:cvnMICRO-STARINT'LCO.,LTD:ct10:*"); These lines are specific to my msi-laptop.c driver. They are basically just a concatenation of a few carefully selected DMI fields with all potentially bad characters stripped. Besides laptop drivers, modules like "hdaps", the i2c modules and the hwmon modules are good candidates for "dmi:" MODULE_ALIAS lines. Besides merely exporting the DMI data via sysfs the patch adds support for a few more DMI fields. Especially the CHASSIS fields are very useful to identify different laptop modules. The patch also adds working MODULE_ALIAS lines to my msi-laptop.c driver. I'd like to thank Kay Sievers for helping me to clean up this patch for posting it on lkml. Patch is against Linus' current GIT HEAD. Should probably apply to older kernels as well without modification. Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i386: Disable nmi watchdog on all ThinkPadsAndi Kleen2006-10-211-0/+20
| | | | | | | Even newer Thinkpads have bugs in SMM code that causes hangs with NMI watchdog. Signed-off-by: Andi Kleen <ak@suse.de>
* [PATCH] DMI: Decode and save OEM String informationShem Multinymous2006-09-291-0/+23
| | | | | | | | | | | | | | | | | | This teaches dmi_decode() how to decode and save OEM Strings (type 11) DMI information, which is currently discarded silently. Existing code using DMI is not affected. Follows the "System Management BIOS (SMBIOS) Specification" (http://www.dmtf.org/standards/smbios), and also the userspace dmidecode.c code. OEM Strings are the only safe way to identify some hardware, e.g., the ThinkPad embedded controller used by the soon-to-be-submitted tp_smapi driver. This will also let us eliminate the long whitelist in the mainline hdaps driver (in a future patch). Signed-off-by: Shem Multinymous <multinymous@gmail.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] DMI: cleanup kernel-doc, add to DocBookRandy Dunlap2006-06-251-4/+9
| | | | | | | | | Add DMI interface functions to a new Firmware Interfaces chapter in the kernel-api DocBook. Clean up kernel-doc in drivers/firmware/dmi_scan.c. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] DMI: move dmi_scan.c from arch/i386 to drivers/firmware/Bjorn Helgaas2006-04-141-0/+358
dmi_scan.c is arch-independent and is used by i386, x86_64, and ia64. Currently all three arches compile it from arch/i386, which means that ia64 and x86_64 depend on things in arch/i386 that they wouldn't otherwise care about. This is simply "mv arch/i386/kernel/dmi_scan.c drivers/firmware/" (removing trailing whitespace) and the associated Makefile changes. All three architectures already set CONFIG_DMI in their top-level Kconfig files. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Andrey Panin <pazke@orbita1.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit (git 2.34.1) at 2024-11-09 01:34:00 +0000