summaryrefslogtreecommitdiffstats
path: root/arch
Commit message (Collapse)AuthorAgeFilesLines
* powerpc/mpc83xx: Fix usb mux setup for mpc834xPeter Korsgaard2009-06-156-11/+11
| | | | | | | | | | | | | | | | | | | | | | usb0 and usb1 mux settings in the sicrl register were swapped (twice!) in mpc834x_usb_cfg(), leading to various strange issues with fsl-ehci and full speed devices. The USB port config on mpc834x is done using 2 muxes: Port 0 is always used for MPH port 0, and port 1 can either be used for MPH port 1 or DR (unless DR uses UTMI phy or OTG, then it uses both ports) - See 8349 RM figure 1-4.. mpc8349_usb_cfg() had this inverted for the DR, and it also had the bit positions of the usb0 / usb1 mux settings swapped. It would basically work if you specified port1 instead of port0 for the MPH controller (and happened to use ULPI phys), which is what all the 834x dts have done, even though that configuration is physically invalid. Instead fix mpc8349_usb_cfg() and adjust the dts files to match reality. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/83xx: Add MSI interrupts to DTS of MPC8315E-RDBleon.woestenberg@gmail.com2009-06-151-0/+15
| | | | | | | | | | | The PCIe MSI interrupts are missing from the device tree source, and thus were not enabled. This patch adds them. Tested to work on MPC8315E-RDB with custom FPGA PCIe device. Signed-off-by: Leon Woestenberg <leon@sidebranch.com> Tested-by: Leon Woestenberg <leon@sidebranch.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/86xx: Add I2C device mappings in DTS for SBC610Martyn Welch2009-06-151-0/+10
| | | | | | | | Mappings for temperature sensors (adt7461 and lm92) are missing from the SBC610's DTS file. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Add UCC6 and UCC8 nodes in SGMII mode for MPC8569MDSHaiying Wang2009-06-151-0/+63
| | | | | Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/83xx: Update sdhci nodes per new bindingsAnton Vorontsov2009-06-156-6/+6
| | | | | | | | | | | | As of commit 404614728f857d0ac63d29c3a29d0cf392a15598 ("Update FSL esdhc binding"), we use "fsl,esdhc" compatible entry as a base match. U-Boot will use the same compatible to fixup esdhc nodes. This patch updates 83xx dts files so that they conform to the new bindings. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl-booke: Enable L1 cache on e500v1/e500v2/e500mc CPUsNate Case2009-06-152-3/+48
| | | | | | | | Some boot loaders may not enable L1 instruction/data cache. Check if data and instruction caches are enabled, and enable them if needed. Signed-off-by: Nate Case <ncase@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/mpc8272ads: fix device tree for 8 MB flash sizeWolfgang Denk2009-06-151-6/+13
| | | | | | | | | | | | | The current device tree for the MPC8272ADS assumes a mapping of 32 MB of NOR flash at 0xFE00.0000, while there are actually only 8 MB on the boards, mapped at 0xFF80.0000. When booting an uImage with such a device tree, the kernel crashes because 0xFE00.0000 is not mapped. Also introduce aliases for serial[01] and ethernet[01]. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Add SWIOTLB support to FSL boardsKumar Gala2009-06-154-0/+59
| | | | | | | | | | | | Add the platform-specific code for enabling SWIOTLB if needed on P2020DS, MPC85xx DS, and MPC85xx MDS boards as they are capable of having >4G of memory. We determine if we need to enable swiotlb based on how much memory is in the board and if it exceeds 4G or what we can map via PCI inbound windows. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: Add 86xx support for SWIOTLBBecky Bruce2009-06-152-0/+16
| | | | | | | | | | | | This is the final bit of code to allow enabling swiotlb on mpc86xx. The platform-specific code is very small and consists of enabling SWIOTLB in the config file, registering the swiotlb_setup_bus_notifier initcall, and setting pci_dma_ops to point to swiotlb_pci_dma_ops if we have more memory than can be mapped by the inbound PCI windows. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ps3: Replace direct file operations by callbackGeert Uytterhoeven2009-06-152-63/+82
| | | | | | | | | | | | Currently the FLASH database is updated by the kernel using file operations, meant for userspace only. While this works for us because copy_{from,to}_user() on powerpc can handle kernel pointers, this is unportable and a bad example. Replace the file operations by callbacks, registered by the ps3flash driver. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* ps3: Switch ps3_os_area_[gs]et_rtc_diff to EXPORT_SYMBOL_GPL()Geert Uytterhoeven2009-06-151-2/+2
| | | | | | | | | They were never intended to be exported using EXPORT_SYMBOL() anyway Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* ps3: Correct debug message in dma_ioc0_map_pages()Geert Uytterhoeven2009-06-151-3/+2
| | | | | | | | | | It reports the failure of a call to lv1_put_iopte(), not lv1_map_device_dma_region(). Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* ps3: shorten ps3_system_bus_[gs]et_driver_data to ps3_system_bus_[gs]et_drvdataGeert Uytterhoeven2009-06-151-2/+2
| | | | | | | | Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Geoff Levand <geoffrey.levand@am.sony.com> Cc: Jim Paris <jim@jtan.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* ps3: Use dev_[gs]et_drvdata() instead of direct access for system bus devicesGeert Uytterhoeven2009-06-151-2/+2
| | | | | | | Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Use generic atomic64_t implementation on 32-bit processorsPaul Mackerras2009-06-152-0/+4
| | | | | | | This makes 32-bit powerpc use the generic atomic64_t implementation. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Add compiler memory barrier to mtmsr macroPaul Mackerras2009-06-152-5/+4
| | | | | | | | | | | | | | | | | | | | On 32-bit non-Book E, local_irq_restore() turns into just mtmsr(), which doesn't currently have a compiler memory barrier. This means that accesses to memory inside a local_irq_save/restore section, or a spin_lock_irqsave/spin_unlock_irqrestore section on UP, can be reordered by the compiler to occur outside that section. To fix this, this adds a compiler memory barrier to mtmsr for both 32-bit and 64-bit. Having a compiler memory barrier in mtmsr makes sense because it will almost always be changing something about the context in which memory accesses are done, so in general we don't want memory accesses getting moved from one side of an mtmsr to the other. With the barrier in mtmsr(), some of the explicit barriers in hw_irq.h are now redundant, so this removes them. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/iseries: Mark signal_vsp_instruction() as maybe unusedMichael Ellerman2009-06-151-1/+2
| | | | | | | | | signal_vsp_instruction() is currently only used if CONFIG_PROC_FS is enabled. However logically it has nothing to do with PROC_FS, so rather than making it depend on that mark it as maybe unused. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/iseries: Fix unused function warning in iSeries DT codeMichael Ellerman2009-06-151-1/+2
| | | | | | | | | If CONFIG_BLK_DEV_INITRD is unset dt_prop_u64() is unused, which causes a warning. We don't really want to tie the definition to BLK_DEV_INITRD, so mark it as maybe unused. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Only build prom_init.o when CONFIG_PPC_OF_BOOT_TRAMPOLINE=yMichael Ellerman2009-06-151-0/+2
| | | | | | | | | | | | | | | Commit 28794d34 ("powerpc/kconfig: Kill PPC_MULTIPLATFORM"), added CONFIG_PPC_OF_BOOT_TRAMPOLINE to control the buliding of prom_init.o However the Makefile still unconditionally builds prom_init_check, the script that checks prom_init.o for symbol usage, and so in turn prom_init.o is still always being built. (it's not linked though) So surround all the prom_init_check logic with an ifeq block testing if CONFIG_PPC_OF_BOOT_TRAMPOLINE is set. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Wire up sys_rt_tgsigqueueinfoStephen Rothwell2009-06-152-1/+3
| | | | | Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/cell: Use driver_data acessors, not platform_data in Axon MSIMichael Ellerman2009-06-151-2/+2
| | | | | | | | The Axon MSI driver incorrectly uses platform_data, rather than the proper accessors for driver_data. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Fix warning in setup_64.c when CONFIG_RELOCATABLE=yMichael Ellerman2009-06-151-2/+2
| | | | | | | | | When CONFIG_RELOCATABLE is enabled, PHYSICAL_START is actually a variable of type phys_addr_t. That means to print it we need to cast to unsigned long long and use llx. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* ps3fb: Tear down FB setup during cleanupGeert Uytterhoeven2009-06-151-0/+8
| | | | | | | | | | | | During cleanup, use L1GPU_CONTEXT_ATTRIBUTE_FB_CLOSE to tear down the setup done by L1GPU_CONTEXT_ATTRIBUTE_FB_SETUP. This allows unloading and reloading of ps3fb while the sound driver keeps the GPU open. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: linux-fbdev-devel@lists.sourceforge.net Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* ps3fb/vram: Extract common GPU stuff into <asm/ps3gpu.h>Geert Uytterhoeven2009-06-153-3/+79
| | | | | | | | Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: linux-fbdev-devel@lists.sourceforge.net Cc: Jim Paris <jim@jtan.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/cell: Extract duplicated IOPTE_* to <asm/iommu.h>Geert Uytterhoeven2009-06-155-40/+39
| | | | | | | | | | Both arch/powerpc/platforms/cell/iommu.c and arch/powerpc/platforms/ps3/mm.c contain the same Cell IOMMU page table entry definitions. Extract them and move them to <asm/iommu.h>, while adding a CBE_ prefix. This also allows them to be used by drivers. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Don't do generic calibrate_delay()Benjamin Herrenschmidt2009-06-152-4/+10
| | | | | | | | | | Currently we are wasting time calling the generic calibrate_delay() function. We don't need it since our implementation of __delay() is based on the CPU timebase. So instead, we use our own small implementation that initializes loops_per_jiffy to something sensible to make the few users like spinlock debug be happy Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/install: Bail with error code on error in install scriptGrant Likely2009-06-151-0/+3
| | | | | | | | | If anything goes wrong when copying images into the install path, then the install script should exit with an error code so that 'make' knows about it and tells the user. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* Merge commit 'origin/master' into nextBenjamin Herrenschmidt2009-06-151120-16484/+71300
|\
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/jaswinder/headers-check-2.6Linus Torvalds2009-06-142-4/+4
| |\ | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jaswinder/headers-check-2.6: headers_check fix: mn10300, setup.h headers_check fix: mn10300, ptrace.h
| | * headers_check fix: mn10300, setup.hJaswinder Singh Rajput2009-06-141-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | fix the following 'make headers_check' warnings: usr/include/asm-mn10300/setup.h:14: extern's make no sense in userspace usr/include/asm-mn10300/setup.h:15: extern's make no sense in userspace Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
| | * headers_check fix: mn10300, ptrace.hJaswinder Singh Rajput2009-06-141-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | fix the following 'make headers_check' warning: usr/include/asm-mn10300/ptrace.h:80: extern's make no sense in userspace Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
| * | Merge branch 'for-linus' of ↵Linus Torvalds2009-06-144-5/+5
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (31 commits) trivial: remove the trivial patch monkey's name from SubmittingPatches trivial: Fix a typo in comment of addrconf_dad_start() trivial: usb: fix missing space typo in doc trivial: pci hotplug: adding __init/__exit macros to sgi_hotplug trivial: Remove the hyphen from git commands trivial: fix ETIMEOUT -> ETIMEDOUT typos trivial: Kconfig: .ko is normally not included in module names trivial: SubmittingPatches: fix typo trivial: Documentation/dell_rbu.txt: fix typos trivial: Fix Pavel's address in MAINTAINERS trivial: ftrace:fix description of trace directory trivial: unnecessary (void*) cast removal in sound/oss/msnd.c trivial: input/misc: Fix typo in Kconfig trivial: fix grammo in bus_for_each_dev() kerneldoc trivial: rbtree.txt: fix rb_entry() parameters in sample code trivial: spelling fix in ppc code comments trivial: fix typo in bio_alloc kernel doc trivial: Documentation/rbtree.txt: cleanup kerneldoc of rbtree.txt trivial: Miscellaneous documentation typo fixes trivial: fix typo milisecond/millisecond for documentation and source comments. ...
| | * | trivial: fix ETIMEOUT -> ETIMEDOUT typosJean Delvare2009-06-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | fix ETIMEOUT -> ETIMEDOUT typos Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * | trivial: Kconfig: .ko is normally not included in module namesPavel Machek2009-06-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | .ko is normally not included in Kconfig help, make it consistent. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * | trivial: spelling fix in ppc code commentsSankar P2009-06-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes a trivial spelling error in powerpc code comments. Signed-off-by: Sankar P <sankar.curiosity@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * | trivial: fix typos s/paramter/parameter/ and s/excute/execute/ in ↵Martin Olsson2009-06-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | documentation and source comments. Signed-off-by: Martin Olsson <martin@minimum.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | | Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2009-06-141-0/+8
| |\ \ \ | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5545/2: add flush_kernel_dcache_page() for ARM
| | * | | [ARM] 5545/2: add flush_kernel_dcache_page() for ARMNicolas Pitre2009-06-141-0/+8
| | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without this, the default implementation is a no op which is completely wrong with a VIVT cache, and usage of sg_copy_buffer() produces unpredictable results. Tested-by: Sebastian Andrzej Siewior <bigeasy@breakpoint.cc> CC: stable@kernel.org Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2009-06-14692-11335/+55059
| |\ \ \ | | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits) MAINTAINERS: EB110ATX is not ebsa110 MAINTAINERS: update Eric Miao's email address and status fb: add support of LCD display controller on pxa168/910 (base layer) [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines [ARM] 5544/1: Trust PrimeCell resource sizes [ARM] pxa/sharpsl_pm: cleanup of gpio-related code. [ARM] pxa/sharpsl_pm: drop set_irq_type calls [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific [ARM] sa1100: remove unused collie_pm.c [ARM] pxa: fix the conflicting non-static declarations of global_gpios[] [ARM] 5550/1: Add default configure file for w90p910 platform [ARM] 5549/1: Add clock api for w90p910 platform. [ARM] 5548/1: Add gpio api for w90p910 platform [ARM] 5551/1: Add multi-function pin api for w90p910 platform. [ARM] Make ARM_VIC_NR depend on ARM_VIC [ARM] 5546/1: ARM PL022 SSP/SPI driver v3 ARM: OMAP4: SMP: Update defconfig for OMAP4430 ARM: OMAP4: SMP: Enable SMP support for OMAP4430 ...
| | * | Merge branch 'u300' into develRussell King2009-06-1432-0/+6464
| | |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/Makefile Updates: arch/arm/mach-u300/core.c arch/arm/mach-u300/timer.c
| | | * | [ARM] 5535/1: U300 Makefile.bootLinus Walleij2009-06-041-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Makefile.boot file for the U300 port. This will compile the kernel for different ZRELADDR depending on the location of physical RAM in the chosen configuration. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | | * | [ARM] 5533/1: Add U300 series defconfigLinus Walleij2009-06-011-0/+1115
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds a defconfig for the U300 series ST-Ericsson mobile platforms. It will be maintained to enable the maximum set of drivers so as to provide a good regression testing target for these platforms. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | | * | [ARM] make U300 clk_set_rate() return a _real_ errnoRussell King2009-05-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Another stupid instance of "return -1"-ism. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | | * | [ARM] 5510/1: U300 GPIO debug and init fixesLinus Walleij2009-05-181-22/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This moves the GPIO driver away from using __devinit and __devexit It also removes all printk() in favor of using dev_* print macros on pdev->dev struct instead. Surplus prints are removed, and the platform_device_probe() function is used instead of putting a .probe function in the platform driver struct. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | | * | [ARM] 5480/1: U300-v5 integrate into the ARM architectureLinus Walleij2009-04-283-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This hooks the U300 support into Kbuild and makes a small hook in mmu.c for supporting an odd memory alignment with shared memory on these systems. This is rebased to RMK:s GIT HEAD. This patch tries to add the Kconfig option in alphabetic order by option text and the Makefile entry after config symbol. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | | * | [ARM] 5473/1: U300 core machine supportLinus Walleij2009-04-2815-0/+1716
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | | * | [ARM] 5474/1: U300 clocking frameworkLinus Walleij2009-04-283-0/+1547
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the clocking framework and hooks into the clkdevice for U300 series platforms. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | | * | [ARM] 5471/2: U300 GPIO and PADMUX supportLinus Walleij2009-04-284-0/+1068
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds GPIO and PADMUX headers and implementation for the U300 platform. This is an implementation in isolation that depend on later patches in this series to plug into the framework. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | | * | [ARM] 5470/1: U300 register definitionsLinus Walleij2009-04-285-0/+970
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds registers, interrupt numbers and IO mappings for the U300 series platforms core support, including basic block offsets and registers definitions for the system controller. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | * | | Merge branch 'stmp' into develRussell King2009-06-14105-0/+11761
| | |\ \ \
generated by cgit (git 2.34.1) at 2024-10-04 04:35:56 +0000