summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* forcedeth: performance changesAyaz Abdulla2009-03-101-2/+2
| | | | | | | | | | | | | This patch modifies the throughput mode poll settings to reduce the number of interrupts. This is only used by older hardware that need a timer irq in throughput mode. Secondly, this patch increases the default rx ring from 128 to 512. This drastically improves bandwidth utilization for small packets sizes i.e 512 bytes. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* forcedeth: add interrupt moderation logicAyaz Abdulla2009-03-101-31/+106
| | | | | | | | | | | | | This patch adds the logic to moderate the interrupts by changing the mode between throughput and poll. If there has been a large amount of time without any burst of network load, the code will transition to pure throughput mode (where each tx/rx/other will cause an interrupt). If bursts of network load occurs, it will transition to poll based mode to help reduce cpu utilization (it will not interrupt on each packet) while maintaining the optimum network bandwidth utilization. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* forcedeth: remove isr processing loopAyaz Abdulla2009-03-101-147/+105
| | | | | | | | | This patch is only a subset of changes so that it is easier to see the modifications. This patch removes the isr 'for' loop and shifts all the logic to account for new tab spacing. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* forcedeth: add new optimization modeAyaz Abdulla2009-03-101-48/+57
| | | | | | | | | | | | | A new optimization mode called Dynamic has been added. This will be mode where interrupt moderation logic will dynamically switch between pure throughput mode and poll based (called 'cpu') mode. Also, for newer chipsets, the timer irq is not needed for throughput mode. Secondly, since we are modifying the irqmask to change between modes, msix is not supported. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* forcedeth: napi - handle all processingAyaz Abdulla2009-03-101-38/+60
| | | | | | | | | | The napi poll routine has been modified to handle all interrupt events and process them accordingly. Therefore, the ISR will now only schedule the napi poll and disable all interrupts instead of just disabling rx interrupt. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* forcedeth: add/modify tx done with limitAyaz Abdulla2009-03-101-6/+14
| | | | | | | | | | There are two tx_done routines to handle tx completion processing. Both these functions now take in a limit value and return the amount of tx completions. This will be used by a future patch to determine the total amount of work done. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* forcedeth: remove overheadAyaz Abdulla2009-03-101-32/+4
| | | | | | | | | | This patch removes unnecessary overhead code. Firstly, there is no nead to mask off unwanted interrupts as we will be checking against the irqmask field anyways. Secondly, there has been no value in last few years from detecting error or unknown interrupts. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* forcedeth: save irq events for napi processingAyaz Abdulla2009-03-101-24/+23
| | | | | | | | | This patch will save the irq events in the driver's context so that the napi routine knows which interrupts have occurred. Subsequent changes will be moving all interrupt processing into the napi poll routine. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* forcedeth: remove msix + napiAyaz Abdulla2009-03-101-21/+5
| | | | | | | | | | | This patch removes support for msix running in conjunction with napi. There has been reported issues regarding the behaviour of irqmask and generation of interrupts by the HW when in MSIX mode. When running napi, the driver is constantly turning off/on the irqmask. For the time being, I am going to disable it until I can root cause the issue. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* forcedeth: fix missing napi enable/disable callsAyaz Abdulla2009-03-101-12/+26
| | | | | | | This patch adds missing napi enable/disable calls. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* forcedeth: fix stats version featureAyaz Abdulla2009-03-101-6/+6
| | | | | | | | | Newer versions of the stats feature would not encompass all older versions. This would result in only retreiving a subset of all available stats in HW. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: fix warning about non-const stringStephen Hemminger2009-03-101-1/+1
| | | | | | | | Since dev_set_name takes a printf style string, new gcc complains if arg is not const. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: convert usage of packet_type to read_mostlyStephen Hemminger2009-03-1021-29/+26
| | | | | | | | Protocols that use packet_type can be __read_mostly section for better locality. Elminate any unnecessary initializations of NULL. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gigaset: return -ENOTTY for unimplemented functionsPaul Bolle2009-03-101-4/+4
| | | | | | | | | | | | | A number of functions in the usb_gigaset module will return -EINVAL if CONFIG_GIGASET_UNDOCREQ is not set. Make these return -ENOTTY as it's more specific and it might make it easier to see (from userspace) why these functions actually fail. Impact: some error return codes changed Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* gigaset: Kconfig cleanupTilman Schmidt2009-03-101-8/+6
| | | | | | | | | | | | | Streamline dependencies and remove some obsolete or redundant comments in the Gigaset ISDN driver's Kconfig file. In particular, remove the strong warning against the GIGASET_UNDOCREQ option, as in seven years of existence, the code in question has never been reported to cause any harm. Impact: Kconfig cleanup, no functional change Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* netxen: annotate board_config and board_typeDhananjay Phadke2009-03-106-109/+85
| | | | | | | | | | | Remove huge board config structure from each instance, read only necessary fields from flash. Replace board_type with port_type (1G/10G), there's another board_type field describing card type (SFP/XFP/CX4). Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netxen: cleanup superfluous multi-context codeDhananjay Phadke2009-03-106-219/+178
| | | | | | | | MAX_RCV_CTX was set to 1, there's only rx context per PCI function. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netxen: refactor netdev open closeDhananjay Phadke2009-03-101-136/+166
| | | | | | | | | rearrange open and close into hardware attach(), detach() and nic up() and down(). this will be used for suspend/resume subsequently. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netxen: small xmit optimizationsDhananjay Phadke2009-03-103-12/+17
| | | | | Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netxen: cleanup rx handlingDhananjay Phadke2009-03-102-74/+13
| | | | | | | | o remove unused rx fragment handling code. o imporove check for status descriptor ownership. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2009-03-107-9/+44
|\ | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x_main.c drivers/net/wireless/iwlwifi/iwl3945-base.c drivers/net/wireless/rt2x00/rt73usb.c
| * bnx2x: Using DMAE to initialize the chipEilon Greenstein2009-03-102-13/+9
| | | | | | | | | | | | | | | | | | | | There was a bug, which occasionally caused failure in PRAM initialization after the cold boot. Also incremented version number to 1.45.27. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnx2x: Casting page alignmentEilon Greenstein2009-03-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Adding a proper cast to the argument of PAGE_ALIGN macro so that the output won't depend on its original type. Without this cast aligned value will be truncated to the size of the argument type. Reported-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Tested-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnx2x: Adding restriction on sge_buf_sizeEilon Greenstein2009-03-101-1/+2
| | | | | | | | | | | | | | | | | | | | sge_buff_size may not be more than 0xffff. Reported-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Tested-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * p54: fix race condition in memory managementChristian Lamparter2009-03-061-3/+6
| | | | | | | | | | | | | | | | This patch fixes a number of race conditions in the driver. Up until now, "entry" pointer was initialized before acquiring the right lock. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * cfg80211: test before subtraction on unsignedRoel Kluin2009-03-061-1/+2
| | | | | | | | | | | | | | freq_diff is unsigned, so test before subtraction Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: fix error flow in iwl*_pci_probeReinette Chatre2009-03-052-12/+11
| | | | | | | | | | | | | | | | | | Both the agn and 3945 drivers has some problems with dealing with errors in their probe functions. Ensure that a goto will undo only things that was done before the goto was called. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rt2x00 : more devices to rt73usb.cXose Vazquez Perez2009-03-051-1/+31
| | | | | | | | | | | | | | | | | | add more usb_dev to rt73usb.c . IDs 'stolen' from the windows inf file(10/21/2008, 1.03.02.0000) plus some from the Ralink linux driver(2009_0206_RT73_Linux_STA_Drv1.1.0.2.tar.bz2) Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rt2x00 : more devices to rt2500usb.cXose Vazquez Perez2009-03-051-0/+8
| | | | | | | | | | | | | | | | add more usb_dev to rt2500usb.c . IDs 'stolen' from the windows inf file(02/12/2009, 2.01.01.0015). Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | qlge: bugfix: Fix endian issue related to rx buffers.Ron Mercer2009-03-101-3/+6
| | | | | | | | | | | | | | This was introduced in an earlier net-next patch. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | qlge: bugfix: Pad outbound frames smaller than 60 bytes.Ron Mercer2009-03-101-0/+3
| | | | | | | | | | | | | | | | With some asic configurations xmit of frames smaller than 60 bytes may fail. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | qlge: bugfix: Move netif_napi_del() to common call point.Ron Mercer2009-03-101-4/+6
| | | | | | | | | | | | | | | | Moving netif_napi_del() up the call chain so it will get called from all exit points. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | qlge: Remove spinlock from asic init path.Ron Mercer2009-03-101-2/+0
| | | | | | | | | | | | | | There is nothing to contend with it. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | qlge: Clear shadow registers before use.Ron Mercer2009-03-101-0/+2
| | | | | | | | | | Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | qlge: Get rid of irqsave/restore in intr disable.Ron Mercer2009-03-101-3/+2
| | | | | | | | | | | | | | | | The completion interrupt disable routine is only called from the ISR, so there is no need for irqsave/restore. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | qlge: bugfix: Tell hw to strip vlan header.Ron Mercer2009-03-101-3/+3
| | | | | | | | | | Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | qlge: Add tx multiqueue support.Ron Mercer2009-03-101-17/+14
| | | | | | | | | | Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | qlge: Add support for GRO.Ron Mercer2009-03-101-10/+20
| | | | | | | | | | Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | qlge: Increase filtering for inbound csum settings.Ron Mercer2009-03-102-13/+29
| | | | | | | | | | | | | | Chip does not do UDP checksum when fragmentation occurs. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | qlge: Remove debug junk from asic reset logic.Ron Mercer2009-03-101-19/+6
| | | | | | | | | | Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | qlge: Move reset logic into asic_reset_worker func.Ron Mercer2009-03-101-23/+18
| | | | | | | | | | | | | | | | Get rid of extraneous ql_cycle_adapter. It's only called from the one place. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | b43: Fix compilation for devices without PCI coreMichael Buesch2009-03-051-0/+2
| | | | | | | | | | | | | | This fixes compilation, if the PCI core is disabled. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: Add a debugfs interface for controlling virtual wiphysJouni Malinen2009-03-052-0/+165
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | debugfs ath9k/phy#/wiphy can be used to show the current list of virtual wiphys and to add/remove virtual wiphys. Eventually, this interface could be replaced with a cfg80211/nl80211 command that is passed through mac80211. For example: # cat /debug/ath9k/phy0/wiphy primary: phy0 # echo add > /debug/ath9k/phy0/wiphy # cat /debug/ath9k/phy0/wiphy primary: phy0 secondary: phy1 # echo del=phy1 > /debug/ath9k/phy0/wiphy # cat /debug/ath9k/phy0/wiphy primary: phy0 In addition, following commands can be used to test pausing and unpausing of the virtual wiphys: pause=phy1 unpause=phy1 select=phy1 (select pauses and unpauses wiphys automatically based on channel) schedule=500 (set wiphy scheduling interval in msec; 0 = disable; default value: 500) Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: Add a simple virtual wiphy schedulerJouni Malinen2009-03-053-0/+72
| | | | | | | | | | | | | | | | | | | | This is a very simple scheduler that goes through the wiphys and schedules one at a time every N milliseconds (current default value: 500 ms). This is enough for initial testing, but there are number of areas where a more complex scheduler can improve operations greatly. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: Special processing for channel changes during scanJouni Malinen2009-03-053-10/+68
| | | | | | | | | | | | | | | | | | | | | | | | Allow mac80211-controlled channel changes on an active wiphy and especially during a scan. We need this as long as the scan is controlled by mac80211. Moving this control into the driver could allow some optimizations on scanning while using multiple virtual interfaces, but for now, try to work as well as possible with the current scan mechanism. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: Add workaround to recover from failed channel changesJouni Malinen2009-03-053-2/+43
| | | | | | | | | | | | | | | | | | | | It looks like channel change may fail in some cases and end up leaving the hardware in state where it cannot transmit any frames. Add a workaround to recover from this state if we detect that wiphy selection is failing due to wiphys not leaving PAUSING state. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: Check virtual wiphy state on tx()Jouni Malinen2009-03-051-0/+6
| | | | | | | | | | | | | | | | | | mac80211 should not be requesting us to transmit frames on paused wiphys since we stop the TX queues. Just in case, add debug code to make sure we catch if this were to happen. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: Pause other virtual wiphys on channel changeJouni Malinen2009-03-053-1/+33
| | | | | | | | | | | | | | | | | | For now, allow channel changes immediately and just force the other virtual wiphys to paused state. This is needed to allow mac80211-controlled scan to control channel changes. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: Register larger listen intervalJouni Malinen2009-03-051-0/+1
| | | | | | | | | | | | | | | | | | Notify the AP that we may be sleeping longer to allow the AP power save code to buffer larger number of frames for us when using virtual wiphys. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: Make start/stop operations aware of virtual wiphysJouni Malinen2009-03-053-0/+49
| | | | | | | | | | | | | | | | Instead of always going through initialization/deinitialization steps, do this only for the first/last wiphy to not break the other wiphys. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2024-11-14 11:17:21 +0000