diff options
Diffstat (limited to 'include/linux/wavefront.h')
| -rw-r--r-- | include/linux/wavefront.h | 675 |
1 files changed, 0 insertions, 675 deletions
diff --git a/include/linux/wavefront.h b/include/linux/wavefront.h deleted file mode 100644 index 51ab3c933ac..00000000000 --- a/include/linux/wavefront.h +++ /dev/null @@ -1,675 +0,0 @@ -#ifndef __wavefront_h__ -#define __wavefront_h__ - -/* WaveFront header file. - * - * Copyright (C) by Paul Barton-Davis 1998 - * - * This program is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - */ - -#if (!defined(__GNUC__) && !defined(__GNUG__)) - - You will not be able to compile this file correctly without gcc, because - it is necessary to pack the "wavefront_alias" structure to a size - of 22 bytes, corresponding to 16-bit alignment (as would have been - the case on the original platform, MS-DOS). If this is not done, - then WavePatch-format files cannot be read/written correctly. - The method used to do this here ("__attribute__((packed)") is - completely compiler dependent. - - All other wavefront_* types end up aligned to 32 bit values and - still have the same (correct) size. - -#else - - /* However, note that as of G++ 2.7.3.2, g++ was unable to - correctly parse *type* __attribute__ tags. It will do the - right thing if we use the "packed" attribute on each struct - member, which has the same semantics anyway. - */ - -#endif /* __GNUC__ */ - -/***************************** WARNING ******************************** - PLEASE DO NOT MODIFY THIS FILE IN ANY WAY THAT AFFECTS ITS ABILITY TO - BE USED WITH EITHER C *OR* C++. - **********************************************************************/ - -#ifndef NUM_MIDIKEYS -#define NUM_MIDIKEYS 128 -#endif /* NUM_MIDIKEYS */ - -#ifndef NUM_MIDICHANNELS -#define NUM_MIDICHANNELS 16 -#endif /* NUM_MIDICHANNELS */ - -/* These are very useful/important. the original wavefront interface - was developed on a 16 bit system, where sizeof(int) = 2 - bytes. Defining things like this makes the code much more portable, and - easier to understand without having to toggle back and forth - between a 16-bit view of the world and a 32-bit one. - */ - -typedef short INT16; -typedef unsigned short UINT16; -typedef int INT32; -typedef unsigned int UINT32; -typedef char CHAR8; -typedef unsigned char UCHAR8; - -/* Pseudo-commands not part of the WaveFront command set. - These are used for various driver controls and direct - hardware control. - */ - -#define WFC_DEBUG_DRIVER 0 -#define WFC_FX_IOCTL 1 -#define WFC_PATCH_STATUS 2 -#define WFC_PROGRAM_STATUS 3 -#define WFC_SAMPLE_STATUS 4 -#define WFC_DISABLE_INTERRUPTS 5 -#define WFC_ENABLE_INTERRUPTS 6 -#define WFC_INTERRUPT_STATUS 7 -#define WFC_ROMSAMPLES_RDONLY 8 -#define WFC_IDENTIFY_SLOT_TYPE 9 - -/* Wavefront synth commands - */ - -#define WFC_DOWNLOAD_SAMPLE 0x80 -#define WFC_DOWNLOAD_BLOCK 0x81 -#define WFC_DOWNLOAD_MULTISAMPLE 0x82 -#define WFC_DOWNLOAD_SAMPLE_ALIAS 0x83 -#define WFC_DELETE_SAMPLE 0x84 -#define WFC_REPORT_FREE_MEMORY 0x85 -#define WFC_DOWNLOAD_PATCH 0x86 -#define WFC_DOWNLOAD_PROGRAM 0x87 -#define WFC_SET_SYNTHVOL 0x89 -#define WFC_SET_NVOICES 0x8B -#define WFC_DOWNLOAD_DRUM 0x90 -#define WFC_GET_SYNTHVOL 0x92 -#define WFC_GET_NVOICES 0x94 -#define WFC_DISABLE_CHANNEL 0x9A -#define WFC_ENABLE_CHANNEL 0x9B -#define WFC_MISYNTH_OFF 0x9D -#define WFC_MISYNTH_ON 0x9E -#define WFC_FIRMWARE_VERSION 0x9F -#define WFC_GET_NSAMPLES 0xA0 -#define WFC_DISABLE_DRUM_PROGRAM 0xA2 -#define WFC_UPLOAD_PATCH 0xA3 -#define WFC_UPLOAD_PROGRAM 0xA4 -#define WFC_SET_TUNING 0xA6 -#define WFC_GET_TUNING 0xA7 -#define WFC_VMIDI_ON 0xA8 -#define WFC_VMIDI_OFF 0xA9 -#define WFC_MIDI_STATUS 0xAA -#define WFC_GET_CHANNEL_STATUS 0xAB -#define WFC_DOWNLOAD_SAMPLE_HEADER 0xAC -#define WFC_UPLOAD_SAMPLE_HEADER 0xAD -#define WFC_UPLOAD_MULTISAMPLE 0xAE -#define WFC_UPLOAD_SAMPLE_ALIAS 0xAF -#define WFC_IDENTIFY_SAMPLE_TYPE 0xB0 -#define WFC_DOWNLOAD_EDRUM_PROGRAM 0xB1 -#define WFC_UPLOAD_EDRUM_PROGRAM 0xB2 -#define WFC_SET_EDRUM_CHANNEL 0xB3 -#define WFC_INSTOUT_LEVELS 0xB4 -#define WFC_PEAKOUT_LEVELS 0xB5 -#define WFC_REPORT_CHANNEL_PROGRAMS 0xB6 -#define WFC_HARDWARE_VERSION 0xCF -#define WFC_UPLOAD_SAMPLE_PARAMS 0xD7 -#define WFC_DOWNLOAD_OS 0xF1 -#define WFC_NOOP 0xFF - -#define WF_MAX_SAMPLE 512 -#define WF_MAX_PATCH 256 -#define WF_MAX_PROGRAM 128 - -#define WF_SECTION_MAX 44 /* longest OS section length */ - -/* # of bytes we send to the board when sending it various kinds of - substantive data, such as samples, patches and programs. -*/ - -#define WF_PROGRAM_BYTES 32 -#define WF_PATCH_BYTES 132 -#define WF_SAMPLE_BYTES 27 -#define WF_SAMPLE_HDR_BYTES 25 -#define WF_ALIAS_BYTES 25 -#define WF_DRUM_BYTES 9 -#define WF_MSAMPLE_BYTES 259 /* (MIDI_KEYS * 2) + 3 */ - -#define WF_ACK 0x80 -#define WF_DMA_ACK 0x81 - -/* OR-values for MIDI status bits */ - -#define WF_MIDI_VIRTUAL_ENABLED 0x1 -#define WF_MIDI_VIRTUAL_IS_EXTERNAL 0x2 -#define WF_MIDI_IN_TO_SYNTH_DISABLED 0x4 - -/* slot indexes for struct address_info: makes code a little more mnemonic */ - -#define WF_SYNTH_SLOT 0 -#define WF_INTERNAL_MIDI_SLOT 1 -#define WF_EXTERNAL_MIDI_SLOT 2 - -/* Magic MIDI bytes used to switch I/O streams on the ICS2115 MPU401 - emulation. Note these NEVER show up in output from the device and - should NEVER be used in input unless Virtual MIDI mode has been - disabled. If they do show up as input, the results are unpredictable. -*/ - -#define WF_EXTERNAL_SWITCH 0xFD -#define WF_INTERNAL_SWITCH 0xF9 - -/* Debugging flags */ - -#define WF_DEBUG_CMD 0x1 -#define WF_DEBUG_DATA 0x2 -#define WF_DEBUG_LOAD_PATCH 0x4 -#define WF_DEBUG_IO 0x8 - -/* WavePatch file format stuff */ - -#define WF_WAVEPATCH_VERSION 120; /* Current version number (1.2) */ -#define WF_MAX_COMMENT 64 /* Comment length */ -#define WF_NUM_LAYERS 4 -#define WF_NAME_LENGTH 32 -#define WF_SOURCE_LENGTH 260 - -#define BankFileID "Bank" -#define DrumkitFileID "DrumKit" -#define ProgramFileID "Program" - -struct wf_envelope -{ - UCHAR8 attack_time:7; - UCHAR8 Unused1:1; - - UCHAR8 decay1_time:7; - UCHAR8 Unused2:1; - - UCHAR8 decay2_time:7; - UCHAR8 Unused3:1; - - UCHAR8 sustain_time:7; - UCHAR8 Unused4:1; - - UCHAR8 release_time:7; - UCHAR8 Unused5:1; - - UCHAR8 release2_time:7; - UCHAR8 Unused6:1; - - CHAR8 attack_level; - CHAR8 decay1_level; - CHAR8 decay2_level; - CHAR8 sustain_level; - CHAR8 release_level; - - UCHAR8 attack_velocity:7; - UCHAR8 Unused7:1; - - UCHAR8 volume_velocity:7; - UCHAR8 Unused8:1; - - UCHAR8 keyboard_scaling:7; - UCHAR8 Unused9:1; -}; -typedef struct wf_envelope wavefront_envelope; - -struct wf_lfo -{ - UCHAR8 sample_number; - - UCHAR8 frequency:7; - UCHAR8 Unused1:1; - - UCHAR8 am_src:4; - UCHAR8 fm_src:4; - - CHAR8 fm_amount; - CHAR8 am_amount; - CHAR8 start_level; - CHAR8 end_level; - - UCHAR8 ramp_delay:7; - UCHAR8 wave_restart:1; /* for LFO2 only */ - - UCHAR8 ramp_time:7; - UCHAR8 Unused2:1; -}; -typedef struct wf_lfo wavefront_lfo; - -struct wf_patch -{ - INT16 frequency_bias; /* ** THIS IS IN MOTOROLA FORMAT!! ** */ - - UCHAR8 amplitude_bias:7; - UCHAR8 Unused1:1; - - UCHAR8 portamento:7; - UCHAR8 Unused2:1; - - UCHAR8 sample_number; - - UCHAR8 pitch_bend:4; - UCHAR8 sample_msb:1; - UCHAR8 Unused3:3; - - UCHAR8 mono:1; - UCHAR8 retrigger:1; - UCHAR8 nohold:1; - UCHAR8 restart:1; - UCHAR8 filterconfig:2; /* SDK says "not used" */ - UCHAR8 reuse:1; - UCHAR8 reset_lfo:1; - - UCHAR8 fm_src2:4; - UCHAR8 fm_src1:4; - - CHAR8 fm_amount1; - CHAR8 fm_amount2; - - UCHAR8 am_src:4; - UCHAR8 Unused4:4; - - CHAR8 am_amount; - - UCHAR8 fc1_mode:4; - UCHAR8 fc2_mode:4; - - CHAR8 fc1_mod_amount; - CHAR8 fc1_keyboard_scaling; - CHAR8 fc1_bias; - CHAR8 fc2_mod_amount; - CHAR8 fc2_keyboard_scaling; - CHAR8 fc2_bias; - - UCHAR8 randomizer:7; - UCHAR8 Unused5:1; - - struct wf_envelope envelope1; - struct wf_envelope envelope2; - struct wf_lfo lfo1; - struct wf_lfo lfo2; -}; -typedef struct wf_patch wavefront_patch; - -struct wf_layer -{ - UCHAR8 patch_number; - - UCHAR8 mix_level:7; - UCHAR8 mute:1; - - UCHAR8 split_point:7; - UCHAR8 play_below:1; - - UCHAR8 pan_mod_src:2; - UCHAR8 pan_or_mod:1; - UCHAR8 pan:4; - UCHAR8 split_type:1; -}; -typedef struct wf_layer wavefront_layer; - -struct wf_program -{ - struct wf_layer layer[WF_NUM_LAYERS]; -}; -typedef struct wf_program wavefront_program; - -struct wf_sample_offset -{ - INT32 Fraction:4; - INT32 Integer:20; - INT32 Unused:8; -}; -typedef struct wf_sample_offset wavefront_sample_offset; - -/* Sample slot types */ - -#define WF_ST_SAMPLE 0 -#define WF_ST_MULTISAMPLE 1 -#define WF_ST_ALIAS 2 -#define WF_ST_EMPTY 3 - -/* pseudo's */ - -#define WF_ST_DRUM 4 -#define WF_ST_PROGRAM 5 -#define WF_ST_PATCH 6 -#define WF_ST_SAMPLEHDR 7 - -#define WF_ST_MASK 0xf - -/* Flags for slot status. These occupy the upper bits of the same byte - as a sample type. -*/ - -#define WF_SLOT_USED 0x80 /* XXX don't rely on this being accurate */ -#define WF_SLOT_FILLED 0x40 -#define WF_SLOT_ROM 0x20 - -#define WF_SLOT_MASK 0xf0 - -/* channel constants */ - -#define WF_CH_MONO 0 -#define WF_CH_LEFT 1 -#define WF_CH_RIGHT 2 - -/* Sample formats */ - -#define LINEAR_16BIT 0 -#define WHITE_NOISE 1 -#define LINEAR_8BIT 2 -#define MULAW_8BIT 3 - -#define WF_SAMPLE_IS_8BIT(smpl) ((smpl)->SampleResolution&2) - - -/* - - Because most/all of the sample data we pass in via pointers has - never been copied (just mmap-ed into user space straight from the - disk), it would be nice to allow handling of multi-channel sample - data without forcing user-level extraction of the relevant bytes. - - So, we need a way of specifying which channel to use (the WaveFront - only handles mono samples in a given slot), and the only way to do - this without using some struct other than wavefront_sample as the - interface is the awful hack of using the unused bits in a - wavefront_sample: - - Val Meaning - --- ------- - 0 no channel selection (use channel 1, sample is MONO) - 1 use first channel, and skip one - 2 use second channel, and skip one - 3 use third channel, and skip two - 4 use fourth channel, skip three - 5 use fifth channel, skip four - 6 use six channel, skip five - - - This can handle up to 4 channels, and anyone downloading >4 channels - of sample data just to select one of them needs to find some tools - like sox ... - - NOTE: values 0, 1 and 2 correspond to WF_CH_* above. This is - important. - -*/ - -#define WF_SET_CHANNEL(samp,chn) \ - (samp)->Unused1 = chn & 0x1; \ - (samp)->Unused2 = chn & 0x2; \ - (samp)->Unused3 = chn & 0x4 - -#define WF_GET_CHANNEL(samp) \ - (((samp)->Unused3 << 2)|((samp)->Unused2<<1)|(samp)->Unused1) - -typedef struct wf_sample { - struct wf_sample_offset sampleStartOffset; - struct wf_sample_offset loopStartOffset; - struct wf_sample_offset loopEndOffset; - struct wf_sample_offset sampleEndOffset; - INT16 FrequencyBias; - UCHAR8 SampleResolution:2; /* sample_format */ - UCHAR8 Unused1:1; - UCHAR8 Loop:1; - UCHAR8 Bidirectional:1; - UCHAR8 Unused2:1; - UCHAR8 Reverse:1; - UCHAR8 Unused3:1; -} wavefront_sample; - -typedef struct wf_multisample { - INT16 NumberOfSamples; /* log2 of the number of samples */ - INT16 SampleNumber[NUM_MIDIKEYS]; -} wavefront_multisample; - -typedef struct wf_alias { - INT16 OriginalSample; - - struct wf_sample_offset sampleStartOffset; - struct wf_sample_offset loopStartOffset; - struct wf_sample_offset sampleEndOffset; - struct wf_sample_offset loopEndOffset; - - INT16 FrequencyBias; - - UCHAR8 SampleResolution:2; - UCHAR8 Unused1:1; - UCHAR8 Loop:1; - UCHAR8 Bidirectional:1; - UCHAR8 Unused2:1; - UCHAR8 Reverse:1; - UCHAR8 Unused3:1; - - /* This structure is meant to be padded only to 16 bits on their - original. Of course, whoever wrote their documentation didn't - realize that sizeof(struct) can be >= - sum(sizeof(struct-fields)) and so thought that giving a C level - description of the structs used in WavePatch files was - sufficient. I suppose it was, as long as you remember the - standard 16->32 bit issues. - */ - - UCHAR8 sixteen_bit_padding; -} __attribute__((packed)) wavefront_alias; - -typedef struct wf_drum { - UCHAR8 PatchNumber; - UCHAR8 MixLevel:7; - UCHAR8 Unmute:1; - UCHAR8 Group:4; - UCHAR8 Unused1:4; - UCHAR8 PanModSource:2; - UCHAR8 PanModulated:1; - UCHAR8 PanAmount:4; - UCHAR8 Unused2:1; -} wavefront_drum; - -typedef struct wf_drumkit { - struct wf_drum drum[NUM_MIDIKEYS]; -} wavefront_drumkit; - -typedef struct wf_channel_programs { - UCHAR8 Program[NUM_MIDICHANNELS]; -} wavefront_channel_programs; - -/* How to get MIDI channel status from the data returned by - a WFC_GET_CHANNEL_STATUS command (a struct wf_channel_programs) -*/ - -#define WF_CHANNEL_STATUS(ch,wcp) (wcp)[(ch/7)] & (1<<((ch)%7)) - -typedef union wf_any { - wavefront_sample s; - wavefront_multisample ms; - wavefront_alias a; - wavefront_program pr; - wavefront_patch p; - wavefront_drum d; -} wavefront_any; - -/* Hannu Solvainen hoped that his "patch_info" struct in soundcard.h - might work for other wave-table based patch loading situations. - Alas, his fears were correct. The WaveFront doesn't even come with - just "patches", but several different kind of structures that - control the sound generation process. - */ - -typedef struct wf_patch_info { - - /* the first two fields are used by the OSS "patch loading" interface - only, and are unused by the current user-level library. - */ - - INT16 key; /* Use WAVEFRONT_PATCH here */ - UINT16 devno; /* fill in when sending */ - UCHAR8 subkey; /* WF_ST_{SAMPLE,ALIAS,etc.} */ - -#define WAVEFRONT_FIND_FREE_SAMPLE_SLOT 999 - - UINT16 number; /* patch/sample/prog number */ - - UINT32 size; /* size of any data included in - one of the fields in `hdrptr', or - as `dataptr'. - - NOTE: for actual samples, this is - the size of the *SELECTED CHANNEL* - even if more data is actually available. - - So, a stereo sample (2 channels) of - 6000 bytes total has `size' = 3000. - - See the macros and comments for - WF_{GET,SET}_CHANNEL above. - - */ - wavefront_any __user *hdrptr; /* user-space ptr to hdr bytes */ - UINT16 __user *dataptr; /* actual sample data */ - - wavefront_any hdr; /* kernel-space copy of hdr bytes */ -} wavefront_patch_info; - -/* The maximum number of bytes we will ever move to or from user space - in response to a WFC_* command. This obviously doesn't cover - actual sample data. -*/ - -#define WF_MAX_READ sizeof(wavefront_multisample) -#define WF_MAX_WRITE sizeof(wavefront_multisample) - -/* - This allows us to execute any WF command except the download/upload - ones, which are handled differently due to copyin/copyout issues as - well as data-nybbling to/from the card. - */ - -typedef struct wavefront_control { - int cmd; /* WFC_* */ - char status; /* return status to user-space */ - unsigned char rbuf[WF_MAX_READ]; /* bytes read from card */ - unsigned char wbuf[WF_MAX_WRITE]; /* bytes written to card */ -} wavefront_control; - -#define WFCTL_WFCMD 0x1 -#define WFCTL_LOAD_SPP 0x2 - -/* Modulator table */ - -#define WF_MOD_LFO1 0 -#define WF_MOD_LFO2 1 -#define WF_MOD_ENV1 2 -#define WF_MOD_ENV2 3 -#define WF_MOD_KEYBOARD 4 -#define WF_MOD_LOGKEY 5 -#define WF_MOD_VELOCITY 6 -#define WF_MOD_LOGVEL 7 -#define WF_MOD_RANDOM 8 -#define WF_MOD_PRESSURE 9 -#define WF_MOD_MOD_WHEEL 10 -#define WF_MOD_1 WF_MOD_MOD_WHEEL -#define WF_MOD_BREATH 11 -#define WF_MOD_2 WF_MOD_BREATH -#define WF_MOD_FOOT 12 -#define WF_MOD_4 WF_MOD_FOOT -#define WF_MOD_VOLUME 13 -#define WF_MOD_7 WF_MOD_VOLUME -#define WF_MOD_PAN 14 -#define WF_MOD_10 WF_MOD_PAN -#define WF_MOD_EXPR 15 -#define WF_MOD_11 WF_MOD_EXPR - -/* FX-related material */ - -typedef struct wf_fx_info { - int request; /* see list below */ - int data[4]; /* we don't need much */ -} wavefront_fx_info; - -/* support for each of these will be forthcoming once I or someone - else has figured out which of the addresses on page 6 and page 7 of - the YSS225 control each parameter. Incidentally, these come from - the Windows driver interface, but again, Turtle Beach didn't - document the API to use them. -*/ - -#define WFFX_SETOUTGAIN 0 -#define WFFX_SETSTEREOOUTGAIN 1 -#define WFFX_SETREVERBIN1GAIN 2 -#define WFFX_SETREVERBIN2GAIN 3 -#define WFFX_SETREVERBIN3GAIN 4 -#define WFFX_SETCHORUSINPORT 5 -#define WFFX_SETREVERBIN1PORT 6 -#define WFFX_SETREVERBIN2PORT 7 -#define WFFX_SETREVERBIN3PORT 8 -#define WFFX_SETEFFECTPORT 9 -#define WFFX_SETAUXPORT 10 -#define WFFX_SETREVERBTYPE 11 -#define WFFX_SETREVERBDELAY 12 -#define WFFX_SETCHORUSLFO 13 -#define WFFX_SETCHORUSPMD 14 -#define WFFX_SETCHORUSAMD 15 -#define WFFX_SETEFFECT 16 -#define WFFX_SETBASEALL 17 -#define WFFX_SETREVERBALL 18 -#define WFFX_SETCHORUSALL 20 -#define WFFX_SETREVERBDEF 22 -#define WFFX_SETCHORUSDEF 23 -#define WFFX_DELAYSETINGAIN 24 -#define WFFX_DELAYSETFBGAIN 25 -#define WFFX_DELAYSETFBLPF 26 -#define WFFX_DELAYSETGAIN 27 -#define WFFX_DELAYSETTIME 28 -#define WFFX_DELAYSETFBTIME 29 -#define WFFX_DELAYSETALL 30 -#define WFFX_DELAYSETDEF 32 -#define WFFX_SDELAYSETINGAIN 33 -#define WFFX_SDELAYSETFBGAIN 34 -#define WFFX_SDELAYSETFBLPF 35 -#define WFFX_SDELAYSETGAIN 36 -#define WFFX_SDELAYSETTIME 37 -#define WFFX_SDELAYSETFBTIME 38 -#define WFFX_SDELAYSETALL 39 -#define WFFX_SDELAYSETDEF 41 -#define WFFX_DEQSETINGAIN 42 -#define WFFX_DEQSETFILTER 43 -#define WFFX_DEQSETALL 44 -#define WFFX_DEQSETDEF 46 -#define WFFX_MUTE 47 -#define WFFX_FLANGESETBALANCE 48 -#define WFFX_FLANGESETDELAY 49 -#define WFFX_FLANGESETDWFFX_TH 50 -#define WFFX_FLANGESETFBGAIN 51 -#define WFFX_FLANGESETINGAIN 52 -#define WFFX_FLANGESETLFO 53 -#define WFFX_FLANGESETALL 54 -#define WFFX_FLANGESETDEF 56 -#define WFFX_PITCHSETSHIFT 57 -#define WFFX_PITCHSETBALANCE 58 -#define WFFX_PITCHSETALL 59 -#define WFFX_PITCHSETDEF 61 -#define WFFX_SRSSETINGAIN 62 -#define WFFX_SRSSETSPACE 63 -#define WFFX_SRSSETCENTER 64 -#define WFFX_SRSSETGAIN 65 -#define WFFX_SRSSETMODE 66 -#define WFFX_SRSSETDEF 68 - -/* Allow direct user-space control over FX memory/coefficient data. - In theory this could be used to download the FX microprogram, - but it would be a little slower, and involve some weird code. - */ - -#define WFFX_MEMSET 69 - -#endif /* __wavefront_h__ */ |