summaryrefslogtreecommitdiffstats
path: root/include/asm-sparc64/dma.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-sparc64/dma.h')
-rw-r--r--include/asm-sparc64/dma.h221
1 files changed, 221 insertions, 0 deletions
diff --git a/include/asm-sparc64/dma.h b/include/asm-sparc64/dma.h
new file mode 100644
index 00000000000..1aab3c8dce2
--- /dev/null
+++ b/include/asm-sparc64/dma.h
@@ -0,0 +1,221 @@
+/* $Id: dma.h,v 1.21 2001/12/13 04:16:52 davem Exp $
+ * include/asm-sparc64/dma.h
+ *
+ * Copyright 1996 (C) David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _ASM_SPARC64_DMA_H
+#define _ASM_SPARC64_DMA_H
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+
+#include <asm/sbus.h>
+#include <asm/delay.h>
+#include <asm/oplib.h>
+
+extern spinlock_t dma_spin_lock;
+
+#define claim_dma_lock() \
+({ unsigned long flags; \
+ spin_lock_irqsave(&dma_spin_lock, flags); \
+ flags; \
+})
+
+#define release_dma_lock(__flags) \
+ spin_unlock_irqrestore(&dma_spin_lock, __flags);
+
+/* These are irrelevant for Sparc DMA, but we leave it in so that
+ * things can compile.
+ */
+#define MAX_DMA_CHANNELS 8
+#define DMA_MODE_READ 1
+#define DMA_MODE_WRITE 2
+#define MAX_DMA_ADDRESS (~0UL)
+
+/* Useful constants */
+#define SIZE_16MB (16*1024*1024)
+#define SIZE_64K (64*1024)
+
+/* SBUS DMA controller reg offsets */
+#define DMA_CSR 0x00UL /* rw DMA control/status register 0x00 */
+#define DMA_ADDR 0x04UL /* rw DMA transfer address register 0x04 */
+#define DMA_COUNT 0x08UL /* rw DMA transfer count register 0x08 */
+#define DMA_TEST 0x0cUL /* rw DMA test/debug register 0x0c */
+
+/* DVMA chip revisions */
+enum dvma_rev {
+ dvmarev0,
+ dvmaesc1,
+ dvmarev1,
+ dvmarev2,
+ dvmarev3,
+ dvmarevplus,
+ dvmahme
+};
+
+#define DMA_HASCOUNT(rev) ((rev)==dvmaesc1)
+
+/* Linux DMA information structure, filled during probe. */
+struct sbus_dma {
+ struct sbus_dma *next;
+ struct sbus_dev *sdev;
+ void __iomem *regs;
+
+ /* Status, misc info */
+ int node; /* Prom node for this DMA device */
+ int running; /* Are we doing DMA now? */
+ int allocated; /* Are we "owned" by anyone yet? */
+
+ /* Transfer information. */
+ u32 addr; /* Start address of current transfer */
+ int nbytes; /* Size of current transfer */
+ int realbytes; /* For splitting up large transfers, etc. */
+
+ /* DMA revision */
+ enum dvma_rev revision;
+};
+
+extern struct sbus_dma *dma_chain;
+
+/* Broken hardware... */
+#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev1)
+#define DMA_ISESC1(dma) ((dma)->revision == dvmaesc1)
+
+/* Main routines in dma.c */
+extern void dvma_init(struct sbus_bus *);
+
+/* Fields in the cond_reg register */
+/* First, the version identification bits */
+#define DMA_DEVICE_ID 0xf0000000 /* Device identification bits */
+#define DMA_VERS0 0x00000000 /* Sunray DMA version */
+#define DMA_ESCV1 0x40000000 /* DMA ESC Version 1 */
+#define DMA_VERS1 0x80000000 /* DMA rev 1 */
+#define DMA_VERS2 0xa0000000 /* DMA rev 2 */
+#define DMA_VERHME 0xb0000000 /* DMA hme gate array */
+#define DMA_VERSPLUS 0x90000000 /* DMA rev 1 PLUS */
+
+#define DMA_HNDL_INTR 0x00000001 /* An IRQ needs to be handled */
+#define DMA_HNDL_ERROR 0x00000002 /* We need to take an error */
+#define DMA_FIFO_ISDRAIN 0x0000000c /* The DMA FIFO is draining */
+#define DMA_INT_ENAB 0x00000010 /* Turn on interrupts */
+#define DMA_FIFO_INV 0x00000020 /* Invalidate the FIFO */
+#define DMA_ACC_SZ_ERR 0x00000040 /* The access size was bad */
+#define DMA_FIFO_STDRAIN 0x00000040 /* DMA_VERS1 Drain the FIFO */
+#define DMA_RST_SCSI 0x00000080 /* Reset the SCSI controller */
+#define DMA_RST_ENET DMA_RST_SCSI /* Reset the ENET controller */
+#define DMA_ST_WRITE 0x00000100 /* write from device to memory */
+#define DMA_ENABLE 0x00000200 /* Fire up DMA, handle requests */
+#define DMA_PEND_READ 0x00000400 /* DMA_VERS1/0/PLUS Pending Read */
+#define DMA_ESC_BURST 0x00000800 /* 1=16byte 0=32byte */
+#define DMA_READ_AHEAD 0x00001800 /* DMA read ahead partial longword */
+#define DMA_DSBL_RD_DRN 0x00001000 /* No EC drain on slave reads */
+#define DMA_BCNT_ENAB 0x00002000 /* If on, use the byte counter */
+#define DMA_TERM_CNTR 0x00004000 /* Terminal counter */
+#define DMA_SCSI_SBUS64 0x00008000 /* HME: Enable 64-bit SBUS mode. */
+#define DMA_CSR_DISAB 0x00010000 /* No FIFO drains during csr */
+#define DMA_SCSI_DISAB 0x00020000 /* No FIFO drains during reg */
+#define DMA_DSBL_WR_INV 0x00020000 /* No EC inval. on slave writes */
+#define DMA_ADD_ENABLE 0x00040000 /* Special ESC DVMA optimization */
+#define DMA_E_BURSTS 0x000c0000 /* ENET: SBUS r/w burst mask */
+#define DMA_E_BURST32 0x00040000 /* ENET: SBUS 32 byte r/w burst */
+#define DMA_E_BURST16 0x00000000 /* ENET: SBUS 16 byte r/w burst */
+#define DMA_BRST_SZ 0x000c0000 /* SCSI: SBUS r/w burst size */
+#define DMA_BRST64 0x000c0000 /* SCSI: 64byte bursts (HME on UltraSparc only) */
+#define DMA_BRST32 0x00040000 /* SCSI: 32byte bursts */
+#define DMA_BRST16 0x00000000 /* SCSI: 16byte bursts */
+#define DMA_BRST0 0x00080000 /* SCSI: no bursts (non-HME gate arrays) */
+#define DMA_ADDR_DISAB 0x00100000 /* No FIFO drains during addr */
+#define DMA_2CLKS 0x00200000 /* Each transfer = 2 clock ticks */
+#define DMA_3CLKS 0x00400000 /* Each transfer = 3 clock ticks */
+#define DMA_EN_ENETAUI DMA_3CLKS /* Put lance into AUI-cable mode */
+#define DMA_CNTR_DISAB 0x00800000 /* No IRQ when DMA_TERM_CNTR set */
+#define DMA_AUTO_NADDR 0x01000000 /* Use "auto nxt addr" feature */
+#define DMA_SCSI_ON 0x02000000 /* Enable SCSI dma */
+#define DMA_PARITY_OFF 0x02000000 /* HME: disable parity checking */
+#define DMA_LOADED_ADDR 0x04000000 /* Address has been loaded */
+#define DMA_LOADED_NADDR 0x08000000 /* Next address has been loaded */
+#define DMA_RESET_FAS366 0x08000000 /* HME: Assert RESET to FAS366 */
+
+/* Values describing the burst-size property from the PROM */
+#define DMA_BURST1 0x01
+#define DMA_BURST2 0x02
+#define DMA_BURST4 0x04
+#define DMA_BURST8 0x08
+#define DMA_BURST16 0x10
+#define DMA_BURST32 0x20
+#define DMA_BURST64 0x40
+#define DMA_BURSTBITS 0x7f
+
+/* Determine highest possible final transfer address given a base */
+#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
+
+/* Yes, I hack a lot of elisp in my spare time... */
+#define DMA_ERROR_P(regs) (((sbus_readl((regs) + DMA_CSR) & DMA_HNDL_ERROR))
+#define DMA_IRQ_P(regs) (((sbus_readl((regs) + DMA_CSR)) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)))
+#define DMA_WRITE_P(regs) (((sbus_readl((regs) + DMA_CSR) & DMA_ST_WRITE))
+#define DMA_OFF(__regs) \
+do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+ tmp &= ~DMA_ENABLE; \
+ sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_INTSOFF(__regs) \
+do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+ tmp &= ~DMA_INT_ENAB; \
+ sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_INTSON(__regs) \
+do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+ tmp |= DMA_INT_ENAB; \
+ sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_PUNTFIFO(__regs) \
+do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+ tmp |= DMA_FIFO_INV; \
+ sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_SETSTART(__regs, __addr) \
+ sbus_writel((u32)(__addr), (__regs) + DMA_ADDR);
+#define DMA_BEGINDMA_W(__regs) \
+do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+ tmp |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB); \
+ sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_BEGINDMA_R(__regs) \
+do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+ tmp |= (DMA_ENABLE|DMA_INT_ENAB); \
+ tmp &= ~DMA_ST_WRITE; \
+ sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+
+/* For certain DMA chips, we need to disable ints upon irq entry
+ * and turn them back on when we are done. So in any ESP interrupt
+ * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
+ * when leaving the handler. You have been warned...
+ */
+#define DMA_IRQ_ENTRY(dma, dregs) do { \
+ if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
+ } while (0)
+
+#define DMA_IRQ_EXIT(dma, dregs) do { \
+ if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
+ } while(0)
+
+#define for_each_dvma(dma) \
+ for((dma) = dma_chain; (dma); (dma) = (dma)->next)
+
+extern int get_dma_list(char *);
+extern int request_dma(unsigned int, __const__ char *);
+extern void free_dma(unsigned int);
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy (0)
+#endif
+
+#endif /* !(_ASM_SPARC64_DMA_H) */