summaryrefslogtreecommitdiffstats
path: root/include/asm-powerpc/ppc-pci.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-powerpc/ppc-pci.h')
-rw-r--r--include/asm-powerpc/ppc-pci.h149
1 files changed, 0 insertions, 149 deletions
diff --git a/include/asm-powerpc/ppc-pci.h b/include/asm-powerpc/ppc-pci.h
deleted file mode 100644
index 854ab713f56..00000000000
--- a/include/asm-powerpc/ppc-pci.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * c 2001 PPC 64 Team, IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef _ASM_POWERPC_PPC_PCI_H
-#define _ASM_POWERPC_PPC_PCI_H
-#ifdef __KERNEL__
-
-#ifdef CONFIG_PCI
-
-#include <linux/pci.h>
-#include <asm/pci-bridge.h>
-
-extern unsigned long isa_io_base;
-
-extern void pci_setup_phb_io(struct pci_controller *hose, int primary);
-extern void pci_setup_phb_io_dynamic(struct pci_controller *hose, int primary);
-
-
-extern struct list_head hose_list;
-
-extern void find_and_init_phbs(void);
-
-extern struct pci_dev *isa_bridge_pcidev; /* may be NULL if no ISA bus */
-
-/** Bus Unit ID macros; get low and hi 32-bits of the 64-bit BUID */
-#define BUID_HI(buid) ((buid) >> 32)
-#define BUID_LO(buid) ((buid) & 0xffffffff)
-
-/* PCI device_node operations */
-struct device_node;
-typedef void *(*traverse_func)(struct device_node *me, void *data);
-void *traverse_pci_devices(struct device_node *start, traverse_func pre,
- void *data);
-
-extern void pci_devs_phb_init(void);
-extern void pci_devs_phb_init_dynamic(struct pci_controller *phb);
-extern void scan_phb(struct pci_controller *hose);
-
-/* From rtas_pci.h */
-extern void init_pci_config_tokens (void);
-extern unsigned long get_phb_buid (struct device_node *);
-extern int rtas_setup_phb(struct pci_controller *phb);
-
-extern unsigned long pci_probe_only;
-
-/* ---- EEH internal-use-only related routines ---- */
-#ifdef CONFIG_EEH
-
-void pci_addr_cache_insert_device(struct pci_dev *dev);
-void pci_addr_cache_remove_device(struct pci_dev *dev);
-void pci_addr_cache_build(void);
-struct pci_dev *pci_get_device_by_addr(unsigned long addr);
-
-/**
- * eeh_slot_error_detail -- record and EEH error condition to the log
- * @pdn: pci device node
- * @severity: EEH_LOG_TEMP_FAILURE or EEH_LOG_PERM_FAILURE
- *
- * Obtains the EEH error details from the RTAS subsystem,
- * and then logs these details with the RTAS error log system.
- */
-#define EEH_LOG_TEMP_FAILURE 1
-#define EEH_LOG_PERM_FAILURE 2
-void eeh_slot_error_detail (struct pci_dn *pdn, int severity);
-
-/**
- * rtas_pci_enable - enable IO transfers for this slot
- * @pdn: pci device node
- * @function: either EEH_THAW_MMIO or EEH_THAW_DMA
- *
- * Enable I/O transfers to this slot
- */
-#define EEH_THAW_MMIO 2
-#define EEH_THAW_DMA 3
-int rtas_pci_enable(struct pci_dn *pdn, int function);
-
-/**
- * rtas_set_slot_reset -- unfreeze a frozen slot
- * @pdn: pci device node
- *
- * Clear the EEH-frozen condition on a slot. This routine
- * does this by asserting the PCI #RST line for 1/8th of
- * a second; this routine will sleep while the adapter is
- * being reset.
- *
- * Returns a non-zero value if the reset failed.
- */
-int rtas_set_slot_reset (struct pci_dn *);
-int eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs);
-
-/**
- * eeh_restore_bars - Restore device configuration info.
- * @pdn: pci device node
- *
- * A reset of a PCI device will clear out its config space.
- * This routines will restore the config space for this
- * device, and is children, to values previously obtained
- * from the firmware.
- */
-void eeh_restore_bars(struct pci_dn *);
-
-/**
- * rtas_configure_bridge -- firmware initialization of pci bridge
- * @pdn: pci device node
- *
- * Ask the firmware to configure all PCI bridges devices
- * located behind the indicated node. Required after a
- * pci device reset. Does essentially the same hing as
- * eeh_restore_bars, but for brdges, and lets firmware
- * do the work.
- */
-void rtas_configure_bridge(struct pci_dn *);
-
-int rtas_write_config(struct pci_dn *, int where, int size, u32 val);
-int rtas_read_config(struct pci_dn *, int where, int size, u32 *val);
-
-/**
- * eeh_mark_slot -- set mode flags for pertition endpoint
- * @pdn: pci device node
- *
- * mark and clear slots: find "partition endpoint" PE and set or
- * clear the flags for each subnode of the PE.
- */
-void eeh_mark_slot (struct device_node *dn, int mode_flag);
-void eeh_clear_slot (struct device_node *dn, int mode_flag);
-
-/**
- * find_device_pe -- Find the associated "Partiationable Endpoint" PE
- * @pdn: pci device node
- */
-struct device_node * find_device_pe(struct device_node *dn);
-
-void eeh_sysfs_add_device(struct pci_dev *pdev);
-void eeh_sysfs_remove_device(struct pci_dev *pdev);
-
-#endif /* CONFIG_EEH */
-
-#else /* CONFIG_PCI */
-static inline void find_and_init_phbs(void) { }
-static inline void init_pci_config_tokens(void) { }
-#endif /* !CONFIG_PCI */
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_PPC_PCI_H */