summaryrefslogtreecommitdiffstats
path: root/fs/fs-writeback.c
diff options
context:
space:
mode:
Diffstat (limited to 'fs/fs-writeback.c')
-rw-r--r--fs/fs-writeback.c1119
1 files changed, 785 insertions, 334 deletions
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index c54226be529..628235cf44b 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -19,171 +19,223 @@
#include <linux/sched.h>
#include <linux/fs.h>
#include <linux/mm.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
#include <linux/writeback.h>
#include <linux/blkdev.h>
#include <linux/backing-dev.h>
#include <linux/buffer_head.h>
#include "internal.h"
+#define inode_to_bdi(inode) ((inode)->i_mapping->backing_dev_info)
-/**
- * writeback_acquire - attempt to get exclusive writeback access to a device
- * @bdi: the device's backing_dev_info structure
- *
- * It is a waste of resources to have more than one pdflush thread blocked on
- * a single request queue. Exclusion at the request_queue level is obtained
- * via a flag in the request_queue's backing_dev_info.state.
- *
- * Non-request_queue-backed address_spaces will share default_backing_dev_info,
- * unless they implement their own. Which is somewhat inefficient, as this
- * may prevent concurrent writeback against multiple devices.
+/*
+ * We don't actually have pdflush, but this one is exported though /proc...
*/
-static int writeback_acquire(struct backing_dev_info *bdi)
+int nr_pdflush_threads;
+
+/*
+ * Work items for the bdi_writeback threads
+ */
+struct bdi_work {
+ struct list_head list;
+ struct list_head wait_list;
+ struct rcu_head rcu_head;
+
+ unsigned long seen;
+ atomic_t pending;
+
+ struct super_block *sb;
+ unsigned long nr_pages;
+ enum writeback_sync_modes sync_mode;
+
+ unsigned long state;
+};
+
+enum {
+ WS_USED_B = 0,
+ WS_ONSTACK_B,
+};
+
+#define WS_USED (1 << WS_USED_B)
+#define WS_ONSTACK (1 << WS_ONSTACK_B)
+
+static inline bool bdi_work_on_stack(struct bdi_work *work)
+{
+ return test_bit(WS_ONSTACK_B, &work->state);
+}
+
+static inline void bdi_work_init(struct bdi_work *work,
+ struct writeback_control *wbc)
+{
+ INIT_RCU_HEAD(&work->rcu_head);
+ work->sb = wbc->sb;
+ work->nr_pages = wbc->nr_to_write;
+ work->sync_mode = wbc->sync_mode;
+ work->state = WS_USED;
+}
+
+static inline void bdi_work_init_on_stack(struct bdi_work *work,
+ struct writeback_control *wbc)
{
- return !test_and_set_bit(BDI_pdflush, &bdi->state);
+ bdi_work_init(work, wbc);
+ work->state |= WS_ONSTACK;
}
/**
* writeback_in_progress - determine whether there is writeback in progress
* @bdi: the device's backing_dev_info structure.
*
- * Determine whether there is writeback in progress against a backing device.
+ * Determine whether there is writeback waiting to be handled against a
+ * backing device.
*/
int writeback_in_progress(struct backing_dev_info *bdi)
{
- return test_bit(BDI_pdflush, &bdi->state);
+ return !list_empty(&bdi->work_list);
}
-/**
- * writeback_release - relinquish exclusive writeback access against a device.
- * @bdi: the device's backing_dev_info structure
- */
-static void writeback_release(struct backing_dev_info *bdi)
+static void bdi_work_clear(struct bdi_work *work)
{
- BUG_ON(!writeback_in_progress(bdi));
- clear_bit(BDI_pdflush, &bdi->state);
+ clear_bit(WS_USED_B, &work->state);
+ smp_mb__after_clear_bit();
+ wake_up_bit(&work->state, WS_USED_B);
}
-static noinline void block_dump___mark_inode_dirty(struct inode *inode)
+static void bdi_work_free(struct rcu_head *head)
{
- if (inode->i_ino || strcmp(inode->i_sb->s_id, "bdev")) {
- struct dentry *dentry;
- const char *name = "?";
+ struct bdi_work *work = container_of(head, struct bdi_work, rcu_head);
- dentry = d_find_alias(inode);
- if (dentry) {
- spin_lock(&dentry->d_lock);
- name = (const char *) dentry->d_name.name;
- }
- printk(KERN_DEBUG
- "%s(%d): dirtied inode %lu (%s) on %s\n",
- current->comm, task_pid_nr(current), inode->i_ino,
- name, inode->i_sb->s_id);
- if (dentry) {
- spin_unlock(&dentry->d_lock);
- dput(dentry);
- }
- }
+ if (!bdi_work_on_stack(work))
+ kfree(work);
+ else
+ bdi_work_clear(work);
}
-/**
- * __mark_inode_dirty - internal function
- * @inode: inode to mark
- * @flags: what kind of dirty (i.e. I_DIRTY_SYNC)
- * Mark an inode as dirty. Callers should use mark_inode_dirty or
- * mark_inode_dirty_sync.
- *
- * Put the inode on the super block's dirty list.
- *
- * CAREFUL! We mark it dirty unconditionally, but move it onto the
- * dirty list only if it is hashed or if it refers to a blockdev.
- * If it was not hashed, it will never be added to the dirty list
- * even if it is later hashed, as it will have been marked dirty already.
- *
- * In short, make sure you hash any inodes _before_ you start marking
- * them dirty.
- *
- * This function *must* be atomic for the I_DIRTY_PAGES case -
- * set_page_dirty() is called under spinlock in several places.
- *
- * Note that for blockdevs, inode->dirtied_when represents the dirtying time of
- * the block-special inode (/dev/hda1) itself. And the ->dirtied_when field of
- * the kernel-internal blockdev inode represents the dirtying time of the
- * blockdev's pages. This is why for I_DIRTY_PAGES we always use
- * page->mapping->host, so the page-dirtying time is recorded in the internal
- * blockdev inode.
- */
-void __mark_inode_dirty(struct inode *inode, int flags)
+static void wb_work_complete(struct bdi_work *work)
{
- struct super_block *sb = inode->i_sb;
+ const enum writeback_sync_modes sync_mode = work->sync_mode;
/*
- * Don't do this for I_DIRTY_PAGES - that doesn't actually
- * dirty the inode itself
+ * For allocated work, we can clear the done/seen bit right here.
+ * For on-stack work, we need to postpone both the clear and free
+ * to after the RCU grace period, since the stack could be invalidated
+ * as soon as bdi_work_clear() has done the wakeup.
*/
- if (flags & (I_DIRTY_SYNC | I_DIRTY_DATASYNC)) {
- if (sb->s_op->dirty_inode)
- sb->s_op->dirty_inode(inode);
- }
+ if (!bdi_work_on_stack(work))
+ bdi_work_clear(work);
+ if (sync_mode == WB_SYNC_NONE || bdi_work_on_stack(work))
+ call_rcu(&work->rcu_head, bdi_work_free);
+}
+static void wb_clear_pending(struct bdi_writeback *wb, struct bdi_work *work)
+{
/*
- * make sure that changes are seen by all cpus before we test i_state
- * -- mikulas
+ * The caller has retrieved the work arguments from this work,
+ * drop our reference. If this is the last ref, delete and free it
*/
- smp_mb();
-
- /* avoid the locking if we can */
- if ((inode->i_state & flags) == flags)
- return;
+ if (atomic_dec_and_test(&work->pending)) {
+ struct backing_dev_info *bdi = wb->bdi;
- if (unlikely(block_dump))
- block_dump___mark_inode_dirty(inode);
+ spin_lock(&bdi->wb_lock);
+ list_del_rcu(&work->list);
+ spin_unlock(&bdi->wb_lock);
- spin_lock(&inode_lock);
- if ((inode->i_state & flags) != flags) {
- const int was_dirty = inode->i_state & I_DIRTY;
+ wb_work_complete(work);
+ }
+}
- inode->i_state |= flags;
+static void bdi_queue_work(struct backing_dev_info *bdi, struct bdi_work *work)
+{
+ if (work) {
+ work->seen = bdi->wb_mask;
+ BUG_ON(!work->seen);
+ atomic_set(&work->pending, bdi->wb_cnt);
+ BUG_ON(!bdi->wb_cnt);
/*
- * If the inode is being synced, just update its dirty state.
- * The unlocker will place the inode on the appropriate
- * superblock list, based upon its state.
+ * Make sure stores are seen before it appears on the list
*/
- if (inode->i_state & I_SYNC)
- goto out;
+ smp_mb();
- /*
- * Only add valid (hashed) inodes to the superblock's
- * dirty list. Add blockdev inodes as well.
- */
- if (!S_ISBLK(inode->i_mode)) {
- if (hlist_unhashed(&inode->i_hash))
- goto out;
- }
- if (inode->i_state & (I_FREEING|I_CLEAR))
- goto out;
+ spin_lock(&bdi->wb_lock);
+ list_add_tail_rcu(&work->list, &bdi->work_list);
+ spin_unlock(&bdi->wb_lock);
+ }
+
+ /*
+ * If the default thread isn't there, make sure we add it. When
+ * it gets created and wakes up, we'll run this work.
+ */
+ if (unlikely(list_empty_careful(&bdi->wb_list)))
+ wake_up_process(default_backing_dev_info.wb.task);
+ else {
+ struct bdi_writeback *wb = &bdi->wb;
/*
- * If the inode was already on s_dirty/s_io/s_more_io, don't
- * reposition it (that would break s_dirty time-ordering).
+ * If we failed allocating the bdi work item, wake up the wb
+ * thread always. As a safety precaution, it'll flush out
+ * everything
*/
- if (!was_dirty) {
- inode->dirtied_when = jiffies;
- list_move(&inode->i_list, &sb->s_dirty);
- }
+ if (!wb_has_dirty_io(wb)) {
+ if (work)
+ wb_clear_pending(wb, work);
+ } else if (wb->task)
+ wake_up_process(wb->task);
}
-out:
- spin_unlock(&inode_lock);
}
-EXPORT_SYMBOL(__mark_inode_dirty);
+/*
+ * Used for on-stack allocated work items. The caller needs to wait until
+ * the wb threads have acked the work before it's safe to continue.
+ */
+static void bdi_wait_on_work_clear(struct bdi_work *work)
+{
+ wait_on_bit(&work->state, WS_USED_B, bdi_sched_wait,
+ TASK_UNINTERRUPTIBLE);
+}
-static int write_inode(struct inode *inode, int sync)
+static struct bdi_work *bdi_alloc_work(struct writeback_control *wbc)
{
- if (inode->i_sb->s_op->write_inode && !is_bad_inode(inode))
- return inode->i_sb->s_op->write_inode(inode, sync);
- return 0;
+ struct bdi_work *work;
+
+ work = kmalloc(sizeof(*work), GFP_ATOMIC);
+ if (work)
+ bdi_work_init(work, wbc);
+
+ return work;
+}
+
+void bdi_start_writeback(struct writeback_control *wbc)
+{
+ const bool must_wait = wbc->sync_mode == WB_SYNC_ALL;
+ struct bdi_work work_stack, *work = NULL;
+
+ if (!must_wait)
+ work = bdi_alloc_work(wbc);
+
+ if (!work) {
+ work = &work_stack;
+ bdi_work_init_on_stack(work, wbc);
+ }
+
+ bdi_queue_work(wbc->bdi, work);
+
+ /*
+ * If the sync mode is WB_SYNC_ALL, block waiting for the work to
+ * complete. If not, we only need to wait for the work to be started,
+ * if we allocated it on-stack. We use the same mechanism, if the
+ * wait bit is set in the bdi_work struct, then threads will not
+ * clear pending until after they are done.
+ *
+ * Note that work == &work_stack if must_wait is true, so we don't
+ * need to do call_rcu() here ever, since the completion path will
+ * have done that for us.
+ */
+ if (must_wait || work == &work_stack) {
+ bdi_wait_on_work_clear(work);
+ if (work != &work_stack)
+ call_rcu(&work->rcu_head, bdi_work_free);
+ }
}
/*
@@ -191,31 +243,32 @@ static int write_inode(struct inode *inode, int sync)
* furthest end of its superblock's dirty-inode list.
*
* Before stamping the inode's ->dirtied_when, we check to see whether it is
- * already the most-recently-dirtied inode on the s_dirty list. If that is
+ * already the most-recently-dirtied inode on the b_dirty list. If that is
* the case then the inode must have been redirtied while it was being written
* out and we don't reset its dirtied_when.
*/
static void redirty_tail(struct inode *inode)
{
- struct super_block *sb = inode->i_sb;
+ struct bdi_writeback *wb = &inode_to_bdi(inode)->wb;
- if (!list_empty(&sb->s_dirty)) {
- struct inode *tail_inode;
+ if (!list_empty(&wb->b_dirty)) {
+ struct inode *tail;
- tail_inode = list_entry(sb->s_dirty.next, struct inode, i_list);
- if (time_before(inode->dirtied_when,
- tail_inode->dirtied_when))
+ tail = list_entry(wb->b_dirty.next, struct inode, i_list);
+ if (time_before(inode->dirtied_when, tail->dirtied_when))
inode->dirtied_when = jiffies;
}
- list_move(&inode->i_list, &sb->s_dirty);
+ list_move(&inode->i_list, &wb->b_dirty);
}
/*
- * requeue inode for re-scanning after sb->s_io list is exhausted.
+ * requeue inode for re-scanning after bdi->b_io list is exhausted.
*/
static void requeue_io(struct inode *inode)
{
- list_move(&inode->i_list, &inode->i_sb->s_more_io);
+ struct bdi_writeback *wb = &inode_to_bdi(inode)->wb;
+
+ list_move(&inode->i_list, &wb->b_more_io);
}
static void inode_sync_complete(struct inode *inode)
@@ -262,20 +315,18 @@ static void move_expired_inodes(struct list_head *delaying_queue,
/*
* Queue all expired dirty inodes for io, eldest first.
*/
-static void queue_io(struct super_block *sb,
- unsigned long *older_than_this)
+static void queue_io(struct bdi_writeback *wb, unsigned long *older_than_this)
{
- list_splice_init(&sb->s_more_io, sb->s_io.prev);
- move_expired_inodes(&sb->s_dirty, &sb->s_io, older_than_this);
+ list_splice_init(&wb->b_more_io, wb->b_io.prev);
+ move_expired_inodes(&wb->b_dirty, &wb->b_io, older_than_this);
}
-int sb_has_dirty_inodes(struct super_block *sb)
+static int write_inode(struct inode *inode, int sync)
{
- return !list_empty(&sb->s_dirty) ||
- !list_empty(&sb->s_io) ||
- !list_empty(&sb->s_more_io);
+ if (inode->i_sb->s_op->write_inode && !is_bad_inode(inode))
+ return inode->i_sb->s_op->write_inode(inode, sync);
+ return 0;
}
-EXPORT_SYMBOL(sb_has_dirty_inodes);
/*
* Wait for writeback on an inode to complete.
@@ -322,11 +373,11 @@ writeback_single_inode(struct inode *inode, struct writeback_control *wbc)
if (inode->i_state & I_SYNC) {
/*
* If this inode is locked for writeback and we are not doing
- * writeback-for-data-integrity, move it to s_more_io so that
+ * writeback-for-data-integrity, move it to b_more_io so that
* writeback can proceed with the other inodes on s_io.
*
* We'll have another go at writing back this inode when we
- * completed a full scan of s_io.
+ * completed a full scan of b_io.
*/
if (!wait) {
requeue_io(inode);
@@ -371,11 +422,11 @@ writeback_single_inode(struct inode *inode, struct writeback_control *wbc)
/*
* We didn't write back all the pages. nfs_writepages()
* sometimes bales out without doing anything. Redirty
- * the inode; Move it from s_io onto s_more_io/s_dirty.
+ * the inode; Move it from b_io onto b_more_io/b_dirty.
*/
/*
* akpm: if the caller was the kupdate function we put
- * this inode at the head of s_dirty so it gets first
+ * this inode at the head of b_dirty so it gets first
* consideration. Otherwise, move it to the tail, for
* the reasons described there. I'm not really sure
* how much sense this makes. Presumably I had a good
@@ -385,7 +436,7 @@ writeback_single_inode(struct inode *inode, struct writeback_control *wbc)
if (wbc->for_kupdate) {
/*
* For the kupdate function we move the inode
- * to s_more_io so it will get more writeout as
+ * to b_more_io so it will get more writeout as
* soon as the queue becomes uncongested.
*/
inode->i_state |= I_DIRTY_PAGES;
@@ -434,50 +485,84 @@ writeback_single_inode(struct inode *inode, struct writeback_control *wbc)
}
/*
- * Write out a superblock's list of dirty inodes. A wait will be performed
- * upon no inodes, all inodes or the final one, depending upon sync_mode.
- *
- * If older_than_this is non-NULL, then only write out inodes which
- * had their first dirtying at a time earlier than *older_than_this.
- *
- * If we're a pdflush thread, then implement pdflush collision avoidance
- * against the entire list.
- *
- * If `bdi' is non-zero then we're being asked to writeback a specific queue.
- * This function assumes that the blockdev superblock's inodes are backed by
- * a variety of queues, so all inodes are searched. For other superblocks,
- * assume that all inodes are backed by the same queue.
- *
- * FIXME: this linear search could get expensive with many fileystems. But
- * how to fix? We need to go from an address_space to all inodes which share
- * a queue with that address_space. (Easy: have a global "dirty superblocks"
- * list).
+ * For WB_SYNC_NONE writeback, the caller does not have the sb pinned
+ * before calling writeback. So make sure that we do pin it, so it doesn't
+ * go away while we are writing inodes from it.
*
- * The inodes to be written are parked on sb->s_io. They are moved back onto
- * sb->s_dirty as they are selected for writing. This way, none can be missed
- * on the writer throttling path, and we get decent balancing between many
- * throttled threads: we don't want them all piling up on inode_sync_wait.
+ * Returns 0 if the super was successfully pinned (or pinning wasn't needed),
+ * 1 if we failed.
*/
-void generic_sync_sb_inodes(struct super_block *sb,
+static int pin_sb_for_writeback(struct writeback_control *wbc,
+ struct inode *inode)
+{
+ struct super_block *sb = inode->i_sb;
+
+ /*
+ * Caller must already hold the ref for this
+ */
+ if (wbc->sync_mode == WB_SYNC_ALL) {
+ WARN_ON(!rwsem_is_locked(&sb->s_umount));
+ return 0;
+ }
+
+ spin_lock(&sb_lock);
+ sb->s_count++;
+ if (down_read_trylock(&sb->s_umount)) {
+ if (sb->s_root) {
+ spin_unlock(&sb_lock);
+ return 0;
+ }
+ /*
+ * umounted, drop rwsem again and fall through to failure
+ */
+ up_read(&sb->s_umount);
+ }
+
+ sb->s_count--;
+ spin_unlock(&sb_lock);
+ return 1;
+}
+
+static void unpin_sb_for_writeback(struct writeback_control *wbc,
+ struct inode *inode)
+{
+ struct super_block *sb = inode->i_sb;
+
+ if (wbc->sync_mode == WB_SYNC_ALL)
+ return;
+
+ up_read(&sb->s_umount);
+ put_super(sb);
+}
+
+static void writeback_inodes_wb(struct bdi_writeback *wb,
struct writeback_control *wbc)
{
+ struct super_block *sb = wbc->sb;
+ const int is_blkdev_sb = sb_is_blkdev_sb(sb);
const unsigned long start = jiffies; /* livelock avoidance */
- int sync = wbc->sync_mode == WB_SYNC_ALL;
spin_lock(&inode_lock);
- if (!wbc->for_kupdate || list_empty(&sb->s_io))
- queue_io(sb, wbc->older_than_this);
- while (!list_empty(&sb->s_io)) {
- struct inode *inode = list_entry(sb->s_io.prev,
+ if (!wbc->for_kupdate || list_empty(&wb->b_io))
+ queue_io(wb, wbc->older_than_this);
+
+ while (!list_empty(&wb->b_io)) {
+ struct inode *inode = list_entry(wb->b_io.prev,
struct inode, i_list);
- struct address_space *mapping = inode->i_mapping;
- struct backing_dev_info *bdi = mapping->backing_dev_info;
long pages_skipped;
- if (!bdi_cap_writeback_dirty(bdi)) {
+ /*
+ * super block given and doesn't match, skip this inode
+ */
+ if (sb && sb != inode->i_sb) {
+ redirty_tail(inode);
+ continue;
+ }
+
+ if (!bdi_cap_writeback_dirty(wb->bdi)) {
redirty_tail(inode);
- if (sb_is_blkdev_sb(sb)) {
+ if (is_blkdev_sb) {
/*
* Dirty memory-backed blockdev: the ramdisk
* driver does this. Skip just this inode
@@ -497,21 +582,14 @@ void generic_sync_sb_inodes(struct super_block *sb,
continue;
}
- if (wbc->nonblocking && bdi_write_congested(bdi)) {
+ if (wbc->nonblocking && bdi_write_congested(wb->bdi)) {
wbc->encountered_congestion = 1;
- if (!sb_is_blkdev_sb(sb))
+ if (!is_blkdev_sb)
break; /* Skip a congested fs */
requeue_io(inode);
continue; /* Skip a congested blockdev */
}
- if (wbc->bdi && bdi != wbc->bdi) {
- if (!sb_is_blkdev_sb(sb))
- break; /* fs has the wrong queue */
- requeue_io(inode);
- continue; /* blockdev has wrong queue */
- }
-
/*
* Was this inode dirtied after sync_sb_inodes was called?
* This keeps sync from extra jobs and livelock.
@@ -519,16 +597,16 @@ void generic_sync_sb_inodes(struct super_block *sb,
if (inode_dirtied_after(inode, start))
break;
- /* Is another pdflush already flushing this queue? */
- if (current_is_pdflush() && !writeback_acquire(bdi))
- break;
+ if (pin_sb_for_writeback(wbc, inode)) {
+ requeue_io(inode);
+ continue;
+ }
BUG_ON(inode->i_state & (I_FREEING | I_CLEAR));
__iget(inode);
pages_skipped = wbc->pages_skipped;
writeback_single_inode(inode, wbc);
- if (current_is_pdflush())
- writeback_release(bdi);
+ unpin_sb_for_writeback(wbc, inode);
if (wbc->pages_skipped != pages_skipped) {
/*
* writeback is not making progress due to locked
@@ -544,144 +622,571 @@ void generic_sync_sb_inodes(struct super_block *sb,
wbc->more_io = 1;
break;
}
- if (!list_empty(&sb->s_more_io))
+ if (!list_empty(&wb->b_more_io))
wbc->more_io = 1;
}
- if (sync) {
- struct inode *inode, *old_inode = NULL;
+ spin_unlock(&inode_lock);
+ /* Leave any unwritten inodes on b_io */
+}
+
+void writeback_inodes_wbc(struct writeback_control *wbc)
+{
+ struct backing_dev_info *bdi = wbc->bdi;
+
+ writeback_inodes_wb(&bdi->wb, wbc);
+}
+
+/*
+ * The maximum number of pages to writeout in a single bdi flush/kupdate
+ * operation. We do this so we don't hold I_SYNC against an inode for
+ * enormous amounts of time, which would block a userspace task which has
+ * been forced to throttle against that inode. Also, the code reevaluates
+ * the dirty each time it has written this many pages.
+ */
+#define MAX_WRITEBACK_PAGES 1024
+
+static inline bool over_bground_thresh(void)
+{
+ unsigned long background_thresh, dirty_thresh;
+
+ get_dirty_limits(&background_thresh, &dirty_thresh, NULL, NULL);
+
+ return (global_page_state(NR_FILE_DIRTY) +
+ global_page_state(NR_UNSTABLE_NFS) >= background_thresh);
+}
+
+/*
+ * Explicit flushing or periodic writeback of "old" data.
+ *
+ * Define "old": the first time one of an inode's pages is dirtied, we mark the
+ * dirtying-time in the inode's address_space. So this periodic writeback code
+ * just walks the superblock inode list, writing back any inodes which are
+ * older than a specific point in time.
+ *
+ * Try to run once per dirty_writeback_interval. But if a writeback event
+ * takes longer than a dirty_writeback_interval interval, then leave a
+ * one-second gap.
+ *
+ * older_than_this takes precedence over nr_to_write. So we'll only write back
+ * all dirty pages if they are all attached to "old" mappings.
+ */
+static long wb_writeback(struct bdi_writeback *wb, long nr_pages,
+ struct super_block *sb,
+ enum writeback_sync_modes sync_mode, int for_kupdate)
+{
+ struct writeback_control wbc = {
+ .bdi = wb->bdi,
+ .sb = sb,
+ .sync_mode = sync_mode,
+ .older_than_this = NULL,
+ .for_kupdate = for_kupdate,
+ .range_cyclic = 1,
+ };
+ unsigned long oldest_jif;
+ long wrote = 0;
+
+ if (wbc.for_kupdate) {
+ wbc.older_than_this = &oldest_jif;
+ oldest_jif = jiffies -
+ msecs_to_jiffies(dirty_expire_interval * 10);
+ }
+
+ for (;;) {
+ /*
+ * Don't flush anything for non-integrity writeback where
+ * no nr_pages was given
+ */
+ if (!for_kupdate && nr_pages <= 0 && sync_mode == WB_SYNC_NONE)
+ break;
/*
- * Data integrity sync. Must wait for all pages under writeback,
- * because there may have been pages dirtied before our sync
- * call, but which had writeout started before we write it out.
- * In which case, the inode may not be on the dirty list, but
- * we still have to wait for that writeout.
+ * If no specific pages were given and this is just a
+ * periodic background writeout and we are below the
+ * background dirty threshold, don't do anything
*/
- list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
- struct address_space *mapping;
+ if (for_kupdate && nr_pages <= 0 && !over_bground_thresh())
+ break;
- if (inode->i_state &
- (I_FREEING|I_CLEAR|I_WILL_FREE|I_NEW))
- continue;
- mapping = inode->i_mapping;
- if (mapping->nrpages == 0)
+ wbc.more_io = 0;
+ wbc.encountered_congestion = 0;
+ wbc.nr_to_write = MAX_WRITEBACK_PAGES;
+ wbc.pages_skipped = 0;
+ writeback_inodes_wb(wb, &wbc);
+ nr_pages -= MAX_WRITEBACK_PAGES - wbc.nr_to_write;
+ wrote += MAX_WRITEBACK_PAGES - wbc.nr_to_write;
+
+ /*
+ * If we ran out of stuff to write, bail unless more_io got set
+ */
+ if (wbc.nr_to_write > 0 || wbc.pages_skipped > 0) {
+ if (wbc.more_io && !wbc.for_kupdate)
continue;
- __iget(inode);
- spin_unlock(&inode_lock);
+ break;
+ }
+ }
+
+ return wrote;
+}
+
+/*
+ * Return the next bdi_work struct that hasn't been processed by this
+ * wb thread yet
+ */
+static struct bdi_work *get_next_work_item(struct backing_dev_info *bdi,
+ struct bdi_writeback *wb)
+{
+ struct bdi_work *work, *ret = NULL;
+
+ rcu_read_lock();
+
+ list_for_each_entry_rcu(work, &bdi->work_list, list) {
+ if (!test_and_clear_bit(wb->nr, &work->seen))
+ continue;
+
+ ret = work;
+ break;
+ }
+
+ rcu_read_unlock();
+ return ret;
+}
+
+static long wb_check_old_data_flush(struct bdi_writeback *wb)
+{
+ unsigned long expired;
+ long nr_pages;
+
+ expired = wb->last_old_flush +
+ msecs_to_jiffies(dirty_writeback_interval * 10);
+ if (time_before(jiffies, expired))
+ return 0;
+
+ wb->last_old_flush = jiffies;
+ nr_pages = global_page_state(NR_FILE_DIRTY) +
+ global_page_state(NR_UNSTABLE_NFS) +
+ (inodes_stat.nr_inodes - inodes_stat.nr_unused);
+
+ if (nr_pages)
+ return wb_writeback(wb, nr_pages, NULL, WB_SYNC_NONE, 1);
+
+ return 0;
+}
+
+/*
+ * Retrieve work items and do the writeback they describe
+ */
+long wb_do_writeback(struct bdi_writeback *wb, int force_wait)
+{
+ struct backing_dev_info *bdi = wb->bdi;
+ struct bdi_work *work;
+ long nr_pages, wrote = 0;
+
+ while ((work = get_next_work_item(bdi, wb)) != NULL) {
+ enum writeback_sync_modes sync_mode;
+
+ nr_pages = work->nr_pages;
+
+ /*
+ * Override sync mode, in case we must wait for completion
+ */
+ if (force_wait)
+ work->sync_mode = sync_mode = WB_SYNC_ALL;
+ else
+ sync_mode = work->sync_mode;
+
+ /*
+ * If this isn't a data integrity operation, just notify
+ * that we have seen this work and we are now starting it.
+ */
+ if (sync_mode == WB_SYNC_NONE)
+ wb_clear_pending(wb, work);
+
+ wrote += wb_writeback(wb, nr_pages, work->sb, sync_mode, 0);
+
+ /*
+ * This is a data integrity writeback, so only do the
+ * notification when we have completed the work.
+ */
+ if (sync_mode == WB_SYNC_ALL)
+ wb_clear_pending(wb, work);
+ }
+
+ /*
+ * Check for periodic writeback, kupdated() style
+ */
+ wrote += wb_check_old_data_flush(wb);
+
+ return wrote;
+}
+
+/*
+ * Handle writeback of dirty data for the device backed by this bdi. Also
+ * wakes up periodically and does kupdated style flushing.
+ */
+int bdi_writeback_task(struct bdi_writeback *wb)
+{
+ unsigned long last_active = jiffies;
+ unsigned long wait_jiffies = -1UL;
+ long pages_written;
+
+ while (!kthread_should_stop()) {
+ pages_written = wb_do_writeback(wb, 0);
+
+ if (pages_written)
+ last_active = jiffies;
+ else if (wait_jiffies != -1UL) {
+ unsigned long max_idle;
+
/*
- * We hold a reference to 'inode' so it couldn't have
- * been removed from s_inodes list while we dropped the
- * inode_lock. We cannot iput the inode now as we can
- * be holding the last reference and we cannot iput it
- * under inode_lock. So we keep the reference and iput
- * it later.
+ * Longest period of inactivity that we tolerate. If we
+ * see dirty data again later, the task will get
+ * recreated automatically.
*/
- iput(old_inode);
- old_inode = inode;
+ max_idle = max(5UL * 60 * HZ, wait_jiffies);
+ if (time_after(jiffies, max_idle + last_active))
+ break;
+ }
+
+ wait_jiffies = msecs_to_jiffies(dirty_writeback_interval * 10);
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(wait_jiffies);
+ try_to_freeze();
+ }
+
+ return 0;
+}
+
+/*
+ * Schedule writeback for all backing devices. Expensive! If this is a data
+ * integrity operation, writeback will be complete when this returns. If
+ * we are simply called for WB_SYNC_NONE, then writeback will merely be
+ * scheduled to run.
+ */
+static void bdi_writeback_all(struct writeback_control *wbc)
+{
+ const bool must_wait = wbc->sync_mode == WB_SYNC_ALL;
+ struct backing_dev_info *bdi;
+ struct bdi_work *work;
+ LIST_HEAD(list);
+
+restart:
+ spin_lock(&bdi_lock);
+
+ list_for_each_entry(bdi, &bdi_list, bdi_list) {
+ struct bdi_work *work;
+
+ if (!bdi_has_dirty_io(bdi))
+ continue;
- filemap_fdatawait(mapping);
+ /*
+ * If work allocation fails, do the writes inline. We drop
+ * the lock and restart the list writeout. This should be OK,
+ * since this happens rarely and because the writeout should
+ * eventually make more free memory available.
+ */
+ work = bdi_alloc_work(wbc);
+ if (!work) {
+ struct writeback_control __wbc;
- cond_resched();
+ /*
+ * Not a data integrity writeout, just continue
+ */
+ if (!must_wait)
+ continue;
- spin_lock(&inode_lock);
+ spin_unlock(&bdi_lock);
+ __wbc = *wbc;
+ __wbc.bdi = bdi;
+ writeback_inodes_wbc(&__wbc);
+ goto restart;
}
- spin_unlock(&inode_lock);
- iput(old_inode);
- } else
- spin_unlock(&inode_lock);
+ if (must_wait)
+ list_add_tail(&work->wait_list, &list);
+
+ bdi_queue_work(bdi, work);
+ }
+
+ spin_unlock(&bdi_lock);
- return; /* Leave any unwritten inodes on s_io */
+ /*
+ * If this is for WB_SYNC_ALL, wait for pending work to complete
+ * before returning.
+ */
+ while (!list_empty(&list)) {
+ work = list_entry(list.next, struct bdi_work, wait_list);
+ list_del(&work->wait_list);
+ bdi_wait_on_work_clear(work);
+ call_rcu(&work->rcu_head, bdi_work_free);
+ }
}
-EXPORT_SYMBOL_GPL(generic_sync_sb_inodes);
-static void sync_sb_inodes(struct super_block *sb,
- struct writeback_control *wbc)
+/*
+ * Start writeback of `nr_pages' pages. If `nr_pages' is zero, write back
+ * the whole world.
+ */
+void wakeup_flusher_threads(long nr_pages)
{
- generic_sync_sb_inodes(sb, wbc);
+ struct writeback_control wbc = {
+ .sync_mode = WB_SYNC_NONE,
+ .older_than_this = NULL,
+ .range_cyclic = 1,
+ };
+
+ if (nr_pages == 0)
+ nr_pages = global_page_state(NR_FILE_DIRTY) +
+ global_page_state(NR_UNSTABLE_NFS);
+ wbc.nr_to_write = nr_pages;
+ bdi_writeback_all(&wbc);
}
-/*
- * Start writeback of dirty pagecache data against all unlocked inodes.
+static noinline void block_dump___mark_inode_dirty(struct inode *inode)
+{
+ if (inode->i_ino || strcmp(inode->i_sb->s_id, "bdev")) {
+ struct dentry *dentry;
+ const char *name = "?";
+
+ dentry = d_find_alias(inode);
+ if (dentry) {
+ spin_lock(&dentry->d_lock);
+ name = (const char *) dentry->d_name.name;
+ }
+ printk(KERN_DEBUG
+ "%s(%d): dirtied inode %lu (%s) on %s\n",
+ current->comm, task_pid_nr(current), inode->i_ino,
+ name, inode->i_sb->s_id);
+ if (dentry) {
+ spin_unlock(&dentry->d_lock);
+ dput(dentry);
+ }
+ }
+}
+
+/**
+ * __mark_inode_dirty - internal function
+ * @inode: inode to mark
+ * @flags: what kind of dirty (i.e. I_DIRTY_SYNC)
+ * Mark an inode as dirty. Callers should use mark_inode_dirty or
+ * mark_inode_dirty_sync.
+ *
+ * Put the inode on the super block's dirty list.
+ *
+ * CAREFUL! We mark it dirty unconditionally, but move it onto the
+ * dirty list only if it is hashed or if it refers to a blockdev.
+ * If it was not hashed, it will never be added to the dirty list
+ * even if it is later hashed, as it will have been marked dirty already.
*
- * Note:
- * We don't need to grab a reference to superblock here. If it has non-empty
- * ->s_dirty it's hadn't been killed yet and kill_super() won't proceed
- * past sync_inodes_sb() until the ->s_dirty/s_io/s_more_io lists are all
- * empty. Since __sync_single_inode() regains inode_lock before it finally moves
- * inode from superblock lists we are OK.
+ * In short, make sure you hash any inodes _before_ you start marking
+ * them dirty.
*
- * If `older_than_this' is non-zero then only flush inodes which have a
- * flushtime older than *older_than_this.
+ * This function *must* be atomic for the I_DIRTY_PAGES case -
+ * set_page_dirty() is called under spinlock in several places.
*
- * If `bdi' is non-zero then we will scan the first inode against each
- * superblock until we find the matching ones. One group will be the dirty
- * inodes against a filesystem. Then when we hit the dummy blockdev superblock,
- * sync_sb_inodes will seekout the blockdev which matches `bdi'. Maybe not
- * super-efficient but we're about to do a ton of I/O...
+ * Note that for blockdevs, inode->dirtied_when represents the dirtying time of
+ * the block-special inode (/dev/hda1) itself. And the ->dirtied_when field of
+ * the kernel-internal blockdev inode represents the dirtying time of the
+ * blockdev's pages. This is why for I_DIRTY_PAGES we always use
+ * page->mapping->host, so the page-dirtying time is recorded in the internal
+ * blockdev inode.
*/
-void
-writeback_inodes(struct writeback_control *wbc)
+void __mark_inode_dirty(struct inode *inode, int flags)
{
- struct super_block *sb;
+ struct super_block *sb = inode->i_sb;
- might_sleep();
- spin_lock(&sb_lock);
-restart:
- list_for_each_entry_reverse(sb, &super_blocks, s_list) {
- if (sb_has_dirty_inodes(sb)) {
- /* we're making our own get_super here */
- sb->s_count++;
- spin_unlock(&sb_lock);
- /*
- * If we can't get the readlock, there's no sense in
- * waiting around, most of the time the FS is going to
- * be unmounted by the time it is released.
- */
- if (down_read_trylock(&sb->s_umount)) {
- if (sb->s_root)
- sync_sb_inodes(sb, wbc);
- up_read(&sb->s_umount);
+ /*
+ * Don't do this for I_DIRTY_PAGES - that doesn't actually
+ * dirty the inode itself
+ */
+ if (flags & (I_DIRTY_SYNC | I_DIRTY_DATASYNC)) {
+ if (sb->s_op->dirty_inode)
+ sb->s_op->dirty_inode(inode);
+ }
+
+ /*
+ * make sure that changes are seen by all cpus before we test i_state
+ * -- mikulas
+ */
+ smp_mb();
+
+ /* avoid the locking if we can */
+ if ((inode->i_state & flags) == flags)
+ return;
+
+ if (unlikely(block_dump))
+ block_dump___mark_inode_dirty(inode);
+
+ spin_lock(&inode_lock);
+ if ((inode->i_state & flags) != flags) {
+ const int was_dirty = inode->i_state & I_DIRTY;
+
+ inode->i_state |= flags;
+
+ /*
+ * If the inode is being synced, just update its dirty state.
+ * The unlocker will place the inode on the appropriate
+ * superblock list, based upon its state.
+ */
+ if (inode->i_state & I_SYNC)
+ goto out;
+
+ /*
+ * Only add valid (hashed) inodes to the superblock's
+ * dirty list. Add blockdev inodes as well.
+ */
+ if (!S_ISBLK(inode->i_mode)) {
+ if (hlist_unhashed(&inode->i_hash))
+ goto out;
+ }
+ if (inode->i_state & (I_FREEING|I_CLEAR))
+ goto out;
+
+ /*
+ * If the inode was already on b_dirty/b_io/b_more_io, don't
+ * reposition it (that would break b_dirty time-ordering).
+ */
+ if (!was_dirty) {
+ struct bdi_writeback *wb = &inode_to_bdi(inode)->wb;
+ struct backing_dev_info *bdi = wb->bdi;
+
+ if (bdi_cap_writeback_dirty(bdi) &&
+ !test_bit(BDI_registered, &bdi->state)) {
+ WARN_ON(1);
+ printk(KERN_ERR "bdi-%s not registered\n",
+ bdi->name);
}
- spin_lock(&sb_lock);
- if (__put_super_and_need_restart(sb))
- goto restart;
+
+ inode->dirtied_when = jiffies;
+ list_move(&inode->i_list, &wb->b_dirty);
}
- if (wbc->nr_to_write <= 0)
- break;
}
- spin_unlock(&sb_lock);
+out:
+ spin_unlock(&inode_lock);
}
+EXPORT_SYMBOL(__mark_inode_dirty);
/*
- * writeback and wait upon the filesystem's dirty inodes. The caller will
- * do this in two passes - one to write, and one to wait.
+ * Write out a superblock's list of dirty inodes. A wait will be performed
+ * upon no inodes, all inodes or the final one, depending upon sync_mode.
+ *
+ * If older_than_this is non-NULL, then only write out inodes which
+ * had their first dirtying at a time earlier than *older_than_this.
+ *
+ * If we're a pdlfush thread, then implement pdflush collision avoidance
+ * against the entire list.
*
- * A finite limit is set on the number of pages which will be written.
- * To prevent infinite livelock of sys_sync().
+ * If `bdi' is non-zero then we're being asked to writeback a specific queue.
+ * This function assumes that the blockdev superblock's inodes are backed by
+ * a variety of queues, so all inodes are searched. For other superblocks,
+ * assume that all inodes are backed by the same queue.
*
- * We add in the number of potentially dirty inodes, because each inode write
- * can dirty pagecache in the underlying blockdev.
+ * The inodes to be written are parked on bdi->b_io. They are moved back onto
+ * bdi->b_dirty as they are selected for writing. This way, none can be missed
+ * on the writer throttling path, and we get decent balancing between many
+ * throttled threads: we don't want them all piling up on inode_sync_wait.
+ */
+static void wait_sb_inodes(struct writeback_control *wbc)
+{
+ struct inode *inode, *old_inode = NULL;
+
+ /*
+ * We need to be protected against the filesystem going from
+ * r/o to r/w or vice versa.
+ */
+ WARN_ON(!rwsem_is_locked(&wbc->sb->s_umount));
+
+ spin_lock(&inode_lock);
+
+ /*
+ * Data integrity sync. Must wait for all pages under writeback,
+ * because there may have been pages dirtied before our sync
+ * call, but which had writeout started before we write it out.
+ * In which case, the inode may not be on the dirty list, but
+ * we still have to wait for that writeout.
+ */
+ list_for_each_entry(inode, &wbc->sb->s_inodes, i_sb_list) {
+ struct address_space *mapping;
+
+ if (inode->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE|I_NEW))
+ continue;
+ mapping = inode->i_mapping;
+ if (mapping->nrpages == 0)
+ continue;
+ __iget(inode);
+ spin_unlock(&inode_lock);
+ /*
+ * We hold a reference to 'inode' so it couldn't have
+ * been removed from s_inodes list while we dropped the
+ * inode_lock. We cannot iput the inode now as we can
+ * be holding the last reference and we cannot iput it
+ * under inode_lock. So we keep the reference and iput
+ * it later.
+ */
+ iput(old_inode);
+ old_inode = inode;
+
+ filemap_fdatawait(mapping);
+
+ cond_resched();
+
+ spin_lock(&inode_lock);
+ }
+ spin_unlock(&inode_lock);
+ iput(old_inode);
+}
+
+/**
+ * writeback_inodes_sb - writeback dirty inodes from given super_block
+ * @sb: the superblock
+ *
+ * Start writeback on some inodes on this super_block. No guarantees are made
+ * on how many (if any) will be written, and this function does not wait
+ * for IO completion of submitted IO. The number of pages submitted is
+ * returned.
*/
-void sync_inodes_sb(struct super_block *sb, int wait)
+long writeback_inodes_sb(struct super_block *sb)
{
struct writeback_control wbc = {
- .sync_mode = wait ? WB_SYNC_ALL : WB_SYNC_NONE,
+ .sb = sb,
+ .sync_mode = WB_SYNC_NONE,
.range_start = 0,
.range_end = LLONG_MAX,
};
+ unsigned long nr_dirty = global_page_state(NR_FILE_DIRTY);
+ unsigned long nr_unstable = global_page_state(NR_UNSTABLE_NFS);
+ long nr_to_write;
- if (!wait) {
- unsigned long nr_dirty = global_page_state(NR_FILE_DIRTY);
- unsigned long nr_unstable = global_page_state(NR_UNSTABLE_NFS);
-
- wbc.nr_to_write = nr_dirty + nr_unstable +
+ nr_to_write = nr_dirty + nr_unstable +
(inodes_stat.nr_inodes - inodes_stat.nr_unused);
- } else
- wbc.nr_to_write = LONG_MAX; /* doesn't actually matter */
- sync_sb_inodes(sb, &wbc);
+ wbc.nr_to_write = nr_to_write;
+ bdi_writeback_all(&wbc);
+ return nr_to_write - wbc.nr_to_write;
}
+EXPORT_SYMBOL(writeback_inodes_sb);
+
+/**
+ * sync_inodes_sb - sync sb inode pages
+ * @sb: the superblock
+ *
+ * This function writes and waits on any dirty inode belonging to this
+ * super_block. The number of pages synced is returned.
+ */
+long sync_inodes_sb(struct super_block *sb)
+{
+ struct writeback_control wbc = {
+ .sb = sb,
+ .sync_mode = WB_SYNC_ALL,
+ .range_start = 0,
+ .range_end = LLONG_MAX,
+ };
+ long nr_to_write = LONG_MAX; /* doesn't actually matter */
+
+ wbc.nr_to_write = nr_to_write;
+ bdi_writeback_all(&wbc);
+ wait_sb_inodes(&wbc);
+ return nr_to_write - wbc.nr_to_write;
+}
+EXPORT_SYMBOL(sync_inodes_sb);
/**
* write_inode_now - write an inode to disk
@@ -737,57 +1242,3 @@ int sync_inode(struct inode *inode, struct writeback_control *wbc)
return ret;
}
EXPORT_SYMBOL(sync_inode);
-
-/**
- * generic_osync_inode - flush all dirty data for a given inode to disk
- * @inode: inode to write
- * @mapping: the address_space that should be flushed
- * @what: what to write and wait upon
- *
- * This can be called by file_write functions for files which have the
- * O_SYNC flag set, to flush dirty writes to disk.
- *
- * @what is a bitmask, specifying which part of the inode's data should be
- * written and waited upon.
- *
- * OSYNC_DATA: i_mapping's dirty data
- * OSYNC_METADATA: the buffers at i_mapping->private_list
- * OSYNC_INODE: the inode itself
- */
-
-int generic_osync_inode(struct inode *inode, struct address_space *mapping, int what)
-{
- int err = 0;
- int need_write_inode_now = 0;
- int err2;
-
- if (what & OSYNC_DATA)
- err = filemap_fdatawrite(mapping);
- if (what & (OSYNC_METADATA|OSYNC_DATA)) {
- err2 = sync_mapping_buffers(mapping);
- if (!err)
- err = err2;
- }
- if (what & OSYNC_DATA) {
- err2 = filemap_fdatawait(mapping);
- if (!err)
- err = err2;
- }
-
- spin_lock(&inode_lock);
- if ((inode->i_state & I_DIRTY) &&
- ((what & OSYNC_INODE) || (inode->i_state & I_DIRTY_DATASYNC)))
- need_write_inode_now = 1;
- spin_unlock(&inode_lock);
-
- if (need_write_inode_now) {
- err2 = write_inode_now(inode, 1);
- if (!err)
- err = err2;
- }
- else
- inode_sync_wait(inode);
-
- return err;
-}
-EXPORT_SYMBOL(generic_osync_inode);