summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/Kconfig2
-rw-r--r--drivers/acpi/video_detect.c10
-rw-r--r--drivers/ata/ata_piix.c2
-rw-r--r--drivers/ata/libata-sff.c6
-rw-r--r--drivers/ata/pata_cs5535.c2
-rw-r--r--drivers/ata/sata_fsl.c6
-rw-r--r--drivers/atm/iphase.c2
-rw-r--r--drivers/base/dd.c2
-rw-r--r--drivers/block/ataflop.c3
-rw-r--r--drivers/block/cciss_cmd.h2
-rw-r--r--drivers/bluetooth/btmrvl_sdio.c2
-rw-r--r--drivers/bluetooth/hci_ldisc.c2
-rw-r--r--drivers/char/mem.c2
-rw-r--r--drivers/char/mspec.c2
-rw-r--r--drivers/char/n_r3964.c2
-rw-r--r--drivers/char/rio/route.h2
-rw-r--r--drivers/char/tty_ioctl.c2
-rw-r--r--drivers/cpuidle/governor.c4
-rw-r--r--drivers/crypto/hifn_795x.c2
-rw-r--r--drivers/dma/at_hdmac.c2
-rw-r--r--drivers/firewire/core-topology.c2
-rw-r--r--drivers/gpu/drm/drm_crtc.c4
-rw-r--r--drivers/gpu/drm/i915/i915_gem.c2
-rw-r--r--drivers/gpu/drm/i915/intel_fb.c2
-rw-r--r--drivers/gpu/drm/i915/intel_sdvo.c2
-rw-r--r--drivers/gpu/drm/radeon/atombios.h16
-rw-r--r--drivers/gpu/drm/radeon/r600.c4
-rw-r--r--drivers/gpu/drm/radeon/radeon_fb.c2
-rw-r--r--drivers/gpu/drm/radeon/radeon_state.c2
-rw-r--r--drivers/gpu/drm/radeon/radeon_ttm.c2
-rw-r--r--drivers/gpu/drm/radeon/rv770.c4
-rw-r--r--drivers/gpu/drm/ttm/ttm_bo_util.c2
-rw-r--r--drivers/hwmon/adm1029.c2
-rw-r--r--drivers/hwmon/lm93.c2
-rw-r--r--drivers/ieee1394/dv1394.c2
-rw-r--r--drivers/infiniband/hw/cxgb3/cxio_hal.c2
-rw-r--r--drivers/infiniband/hw/ipath/ipath_iba6110.c2
-rw-r--r--drivers/infiniband/hw/ipath/ipath_sd7220.c4
-rw-r--r--drivers/infiniband/hw/mlx4/qp.c2
-rw-r--r--drivers/infiniband/ulp/iser/iser_verbs.c2
-rw-r--r--drivers/input/serio/hp_sdc.c2
-rw-r--r--drivers/input/serio/hp_sdc_mlc.c2
-rw-r--r--drivers/input/touchscreen/atmel-wm97xx.c2
-rw-r--r--drivers/input/touchscreen/mainstone-wm97xx.c4
-rw-r--r--drivers/input/touchscreen/zylonite-wm97xx.c2
-rw-r--r--drivers/isdn/act2000/Kconfig4
-rw-r--r--drivers/isdn/capi/Kconfig4
-rw-r--r--drivers/isdn/capi/capidrv.c2
-rw-r--r--drivers/isdn/hardware/eicon/di.c2
-rw-r--r--drivers/isdn/hardware/eicon/maintidi.c4
-rw-r--r--drivers/isdn/hardware/mISDN/hfcsusb.c2
-rw-r--r--drivers/isdn/hardware/mISDN/hfcsusb.h2
-rw-r--r--drivers/isdn/hardware/mISDN/mISDNisar.c2
-rw-r--r--drivers/isdn/hisax/hfc_usb.c2
-rw-r--r--drivers/isdn/hysdn/Kconfig4
-rw-r--r--drivers/isdn/i4l/isdn_net.c2
-rw-r--r--drivers/isdn/i4l/isdn_ppp.c6
-rw-r--r--drivers/isdn/i4l/isdn_ttyfax.c2
-rw-r--r--drivers/isdn/icn/Kconfig4
-rw-r--r--drivers/isdn/mISDN/dsp_core.c2
-rw-r--r--drivers/isdn/mISDN/tei.c2
-rw-r--r--drivers/isdn/pcbit/Kconfig4
-rw-r--r--drivers/isdn/sc/Kconfig4
-rw-r--r--drivers/macintosh/therm_windtunnel.c2
-rw-r--r--drivers/md/dm-crypt.c2
-rw-r--r--drivers/media/common/saa7146_i2c.c2
-rw-r--r--drivers/media/dvb/dvb-core/dvb_frontend.h2
-rw-r--r--drivers/media/dvb/dvb-core/dvb_net.c2
-rw-r--r--drivers/media/dvb/dvb-usb/anysee.c2
-rw-r--r--drivers/media/dvb/dvb-usb/dibusb-mb.c2
-rw-r--r--drivers/media/dvb/dvb-usb/dvb-usb-remote.c2
-rw-r--r--drivers/media/dvb/dvb-usb/usb-urb.c4
-rw-r--r--drivers/media/dvb/frontends/au8522_decoder.c2
-rw-r--r--drivers/media/dvb/frontends/cx24110.c4
-rw-r--r--drivers/media/dvb/frontends/cx24113.c2
-rw-r--r--drivers/media/dvb/frontends/dib3000mb.c2
-rw-r--r--drivers/media/dvb/frontends/drx397xD.c2
-rw-r--r--drivers/media/dvb/frontends/lgdt330x.c4
-rw-r--r--drivers/media/dvb/frontends/stb0899_drv.c2
-rw-r--r--drivers/media/dvb/ttpci/av7110.c4
-rw-r--r--drivers/media/dvb/ttpci/budget-patch.c2
-rw-r--r--drivers/media/radio/radio-mr800.c2
-rw-r--r--drivers/media/video/cx18/cx18-av-core.h2
-rw-r--r--drivers/media/video/cx18/cx18-driver.c4
-rw-r--r--drivers/media/video/cx18/cx18-mailbox.h2
-rw-r--r--drivers/media/video/cx231xx/cx231xx-avcore.c8
-rw-r--r--drivers/media/video/cx23885/cx23885-core.c4
-rw-r--r--drivers/media/video/cx23885/cx23885-dvb.c2
-rw-r--r--drivers/media/video/cx88/cx88-core.c2
-rw-r--r--drivers/media/video/davinci/dm355_ccdc.c6
-rw-r--r--drivers/media/video/davinci/dm644x_ccdc.c4
-rw-r--r--drivers/media/video/davinci/vpss.c2
-rw-r--r--drivers/media/video/gspca/sonixb.c2
-rw-r--r--drivers/media/video/gspca/spca500.c2
-rw-r--r--drivers/media/video/gspca/spca501.c6
-rw-r--r--drivers/media/video/gspca/sunplus.c2
-rw-r--r--drivers/media/video/gspca/zc3xx.c2
-rw-r--r--drivers/media/video/ivtv/ivtv-driver.c4
-rw-r--r--drivers/media/video/ov772x.c2
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h2
-rw-r--r--drivers/media/video/s2255drv.c2
-rw-r--r--drivers/media/video/saa7134/saa7134-core.c4
-rw-r--r--drivers/media/video/saa7164/saa7164-core.c4
-rw-r--r--drivers/media/video/zoran/zoran.h2
-rw-r--r--drivers/message/i2o/i2o_block.c2
-rw-r--r--drivers/message/i2o/iop.c4
-rw-r--r--drivers/misc/sgi-gru/grufile.c2
-rw-r--r--drivers/mmc/card/sdio_uart.c40
-rw-r--r--drivers/mmc/host/s3cmci.c2
-rw-r--r--drivers/mtd/chips/Kconfig3
-rw-r--r--drivers/mtd/devices/Kconfig3
-rw-r--r--drivers/mtd/devices/slram.c2
-rw-r--r--drivers/mtd/lpddr/Kconfig3
-rw-r--r--drivers/mtd/maps/Kconfig8
-rw-r--r--drivers/mtd/nand/Kconfig2
-rw-r--r--drivers/mtd/nand/diskonchip.c2
-rw-r--r--drivers/mtd/nand/nand_ecc.c2
-rw-r--r--drivers/mtd/nand/s3c2410.c2
-rw-r--r--drivers/mtd/onenand/Kconfig4
-rw-r--r--drivers/mtd/ubi/Kconfig2
-rw-r--r--drivers/net/82596.c2
-rw-r--r--drivers/net/amd8111e.c7
-rw-r--r--drivers/net/appletalk/cops.c2
-rw-r--r--drivers/net/ariadne.h2
-rw-r--r--drivers/net/atl1c/atl1c_main.c2
-rw-r--r--drivers/net/benet/be_cmds.h2
-rw-r--r--drivers/net/benet/be_main.c2
-rw-r--r--drivers/net/bnx2x_reg.h2
-rw-r--r--drivers/net/bonding/bond_alb.c2
-rw-r--r--drivers/net/cxgb3/sge.c2
-rw-r--r--drivers/net/ehea/ehea_ethtool.c4
-rw-r--r--drivers/net/hamradio/baycom_ser_fdx.c2
-rw-r--r--drivers/net/irda/smsc-ircc2.c2
-rw-r--r--drivers/net/iseries_veth.c2
-rw-r--r--drivers/net/lasi_82596.c2
-rw-r--r--drivers/net/lib82596.c2
-rw-r--r--drivers/net/mlx4/en_rx.c2
-rw-r--r--drivers/net/mlx4/en_tx.c2
-rw-r--r--drivers/net/mlx4/mlx4_en.h2
-rw-r--r--drivers/net/ps3_gelic_net.c2
-rw-r--r--drivers/net/ps3_gelic_wireless.h2
-rw-r--r--drivers/net/qla3xxx.c2
-rw-r--r--drivers/net/s2io.c2
-rw-r--r--drivers/net/sis900.c4
-rw-r--r--drivers/net/skfp/h/smc.h8
-rw-r--r--drivers/net/skfp/skfddi.c2
-rw-r--r--drivers/net/sky2.c2
-rw-r--r--drivers/net/smsc911x.c2
-rw-r--r--drivers/net/smsc911x.h2
-rw-r--r--drivers/net/spider_net.c2
-rw-r--r--drivers/net/stmmac/gmac.c2
-rw-r--r--drivers/net/stmmac/gmac.h4
-rw-r--r--drivers/net/tokenring/ibmtr.c2
-rw-r--r--drivers/net/tokenring/smctr.c2
-rw-r--r--drivers/net/ucc_geth.c2
-rw-r--r--drivers/net/ucc_geth.h20
-rw-r--r--drivers/net/usb/smsc95xx.c2
-rw-r--r--drivers/net/wan/hdlc_fr.c2
-rw-r--r--drivers/net/wan/lmc/lmc_main.c2
-rw-r--r--drivers/net/wimax/i2400m/rx.c2
-rw-r--r--drivers/net/wireless/ath/ath5k/base.h4
-rw-r--r--drivers/net/wireless/ath/ath5k/eeprom.c2
-rw-r--r--drivers/net/wireless/ath/ath5k/phy.c6
-rw-r--r--drivers/net/wireless/ath/ath9k/rc.c2
-rw-r--r--drivers/net/wireless/b43/main.c2
-rw-r--r--drivers/net/wireless/b43legacy/main.c2
-rw-r--r--drivers/net/wireless/ipw2x00/ipw2100.c6
-rw-r--r--drivers/net/wireless/ipw2x00/ipw2200.c8
-rw-r--r--drivers/net/wireless/ipw2x00/libipw_module.c2
-rw-r--r--drivers/net/wireless/iwmc3200wifi/hal.c2
-rw-r--r--drivers/net/wireless/iwmc3200wifi/rx.c2
-rw-r--r--drivers/net/wireless/libertas/if_sdio.c2
-rw-r--r--drivers/net/wireless/orinoco/hermes_dld.c4
-rw-r--r--drivers/net/wireless/prism54/isl_ioctl.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt2400pci.h2
-rw-r--r--drivers/net/wireless/rt2x00/rt2500pci.h2
-rw-r--r--drivers/net/wireless/rt2x00/rt2500usb.h2
-rw-r--r--drivers/net/wireless/rt2x00/rt61pci.h2
-rw-r--r--drivers/net/wireless/rt2x00/rt73usb.h2
-rw-r--r--drivers/net/wireless/zd1211rw/zd_mac.c2
-rw-r--r--drivers/parisc/ccio-dma.c2
-rw-r--r--drivers/platform/Kconfig2
-rw-r--r--drivers/platform/x86/thinkpad_acpi.c2
-rw-r--r--drivers/pnp/pnpbios/rsparser.c8
-rw-r--r--drivers/ps3/ps3-sys-manager.c2
-rw-r--r--drivers/rtc/rtc-ds1511.c4
-rw-r--r--drivers/rtc/rtc-stk17ta8.c2
-rw-r--r--drivers/rtc/rtc-v3020.c2
-rw-r--r--drivers/s390/block/dasd_proc.c2
-rw-r--r--drivers/s390/char/fs3270.c2
-rw-r--r--drivers/s390/cio/chp.c2
-rw-r--r--drivers/s390/cio/cmf.c2
-rw-r--r--drivers/s390/net/qeth_core_mpc.h2
-rw-r--r--drivers/sbus/char/envctrl.c4
-rw-r--r--drivers/scsi/3w-9xxx.c2
-rw-r--r--drivers/scsi/3w-xxxx.c2
-rw-r--r--drivers/scsi/53c700.c2
-rw-r--r--drivers/scsi/aacraid/aacraid.h6
-rw-r--r--drivers/scsi/aacraid/comminit.c2
-rw-r--r--drivers/scsi/advansys.c2
-rw-r--r--drivers/scsi/aic7xxx/aic79xx.seq4
-rw-r--r--drivers/scsi/aic7xxx/aic79xx_core.c2
-rw-r--r--drivers/scsi/aic7xxx/aic79xx_osm.c2
-rw-r--r--drivers/scsi/aic7xxx/aic7xxx.seq2
-rw-r--r--drivers/scsi/aic7xxx/aic7xxx_core.c2
-rw-r--r--drivers/scsi/aic7xxx/aic7xxx_osm.c2
-rw-r--r--drivers/scsi/aic94xx/aic94xx_reg_def.h2
-rw-r--r--drivers/scsi/bfa/include/defs/bfa_defs_pport.h2
-rw-r--r--drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h2
-rw-r--r--drivers/scsi/bfa/include/protocol/ct.h4
-rw-r--r--drivers/scsi/bnx2i/bnx2i_iscsi.c2
-rw-r--r--drivers/scsi/dc395x.c2
-rw-r--r--drivers/scsi/dmx3191d.c2
-rw-r--r--drivers/scsi/hptiop.c2
-rw-r--r--drivers/scsi/libfc/fc_lport.c2
-rw-r--r--drivers/scsi/libiscsi_tcp.c2
-rw-r--r--drivers/scsi/lpfc/lpfc_attr.c4
-rw-r--r--drivers/scsi/lpfc/lpfc_els.c4
-rw-r--r--drivers/scsi/lpfc/lpfc_init.c62
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.c10
-rw-r--r--drivers/scsi/megaraid.h2
-rw-r--r--drivers/scsi/megaraid/mbox_defs.h2
-rw-r--r--drivers/scsi/megaraid/megaraid_mbox.c2
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_scsih.c2
-rw-r--r--drivers/scsi/ncr53c8xx.c2
-rw-r--r--drivers/scsi/nsp32.c2
-rw-r--r--drivers/scsi/pmcraid.c6
-rw-r--r--drivers/scsi/pmcraid.h6
-rw-r--r--drivers/scsi/scsi_netlink.c2
-rw-r--r--drivers/scsi/scsi_transport_sas.c6
-rw-r--r--drivers/scsi/sym53c8xx_2/sym_glue.c2
-rw-r--r--drivers/scsi/sym53c8xx_2/sym_hipd.c2
-rw-r--r--drivers/scsi/sym53c8xx_2/sym_hipd.h2
-rw-r--r--drivers/scsi/wd7000.c2
-rw-r--r--drivers/serial/8250_pnp.c4
-rw-r--r--drivers/serial/pmac_zilog.h2
-rw-r--r--drivers/serial/ucc_uart.c2
-rw-r--r--drivers/spi/spidev.c2
-rw-r--r--drivers/staging/otus/80211core/pub_zfi.h2
-rw-r--r--drivers/staging/otus/zdcompat.h2
-rw-r--r--drivers/staging/rtl8187se/r8180.h2
-rw-r--r--drivers/staging/rtl8192su/r8192S_phyreg.h2
-rw-r--r--drivers/staging/wavelan/wavelan_cs.c2
-rw-r--r--drivers/telephony/ixj.c4
-rw-r--r--drivers/usb/atm/ueagle-atm.c2
-rw-r--r--drivers/usb/class/usbtmc.c2
-rw-r--r--drivers/usb/core/message.c2
-rw-r--r--drivers/usb/gadget/f_acm.c2
-rw-r--r--drivers/usb/gadget/pxa27x_udc.c2
-rw-r--r--drivers/usb/host/ehci-hcd.c2
-rw-r--r--drivers/usb/host/fhci-sched.c2
-rw-r--r--drivers/usb/wusbcore/crypto.c2
-rw-r--r--drivers/usb/wusbcore/wa-xfer.c4
-rw-r--r--drivers/uwb/i1480/dfu/usb.c2
-rw-r--r--drivers/uwb/neh.c2
-rw-r--r--drivers/uwb/wlp/txrx.c2
-rw-r--r--drivers/video/atmel_lcdfb.c2
-rw-r--r--drivers/video/aty/atyfb_base.c4
-rw-r--r--drivers/video/backlight/atmel-pwm-bl.c2
-rw-r--r--drivers/video/backlight/tosa_lcd.c2
-rw-r--r--drivers/video/console/sticore.c2
-rw-r--r--drivers/video/fb_defio.c2
-rw-r--r--drivers/video/gbefb.c2
-rw-r--r--drivers/video/omap/lcd_ams_delta.c4
-rw-r--r--drivers/video/omap/lcd_mipid.c4
-rw-r--r--drivers/video/sgivwfb.c4
-rw-r--r--drivers/video/stifb.c4
-rw-r--r--drivers/video/tdfxfb.c2
-rw-r--r--drivers/video/via/dvi.c4
-rw-r--r--drivers/video/vt8623fb.c2
-rw-r--r--drivers/watchdog/coh901327_wdt.c2
-rw-r--r--drivers/watchdog/machzwd.c2
-rw-r--r--drivers/watchdog/sb_wdog.c4
-rw-r--r--drivers/watchdog/wdrtas.c6
274 files changed, 417 insertions, 458 deletions
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 48bbdbe43e6..26e434ad373 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -1,5 +1,3 @@
-# drivers/Kconfig
-
menu "Device Drivers"
source "drivers/base/Kconfig"
diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index 575593a8b4e..27c77729c7c 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -7,7 +7,7 @@
* video_detect.c:
* Provides acpi_is_video_device() for early scanning of ACPI devices in scan.c
* There a Linux specific (Spec does not provide a HID for video devices) is
- * assinged
+ * assigned
*
* After PCI devices are glued with ACPI devices
* acpi_get_pci_dev() can be called to identify ACPI graphics
@@ -83,16 +83,16 @@ long acpi_is_video_device(struct acpi_device *device)
if (!device)
return 0;
- /* Does this device able to support video switching ? */
+ /* Is this device able to support video switching ? */
if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy)) ||
ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy)))
video_caps |= ACPI_VIDEO_OUTPUT_SWITCHING;
- /* Does this device able to retrieve a video ROM ? */
+ /* Is this device able to retrieve a video ROM ? */
if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_ROM", &h_dummy)))
video_caps |= ACPI_VIDEO_ROM_AVAILABLE;
- /* Does this device able to configure which video head to be POSTed ? */
+ /* Is this device able to configure which video head to be POSTed ? */
if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_VPO", &h_dummy)) &&
ACPI_SUCCESS(acpi_get_handle(device->handle, "_GPD", &h_dummy)) &&
ACPI_SUCCESS(acpi_get_handle(device->handle, "_SPD", &h_dummy)))
@@ -137,7 +137,7 @@ find_video(acpi_handle handle, u32 lvl, void *context, void **rv)
*
* if NULL is passed as argument all ACPI devices are enumerated and
* all graphics capabilities of physically present devices are
- * summerized and returned. This is cached and done only once.
+ * summarized and returned. This is cached and done only once.
*/
long acpi_video_get_capabilities(acpi_handle graphics_handle)
{
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 0c6155f5117..19136a7e106 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -599,7 +599,7 @@ static const struct ich_laptop ich_laptop[] = {
{ 0x27DF, 0x1028, 0x02b0 }, /* ICH7 on unknown Dell */
{ 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */
{ 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */
- { 0x27DF, 0x103C, 0x361a }, /* ICH7 on unkown HP */
+ { 0x27DF, 0x103C, 0x361a }, /* ICH7 on unknown HP */
{ 0x27DF, 0x1071, 0xD221 }, /* ICH7 on Hercules EC-900 */
{ 0x27DF, 0x152D, 0x0778 }, /* ICH7 on unknown Intel */
{ 0x24CA, 0x1025, 0x0061 }, /* ICH4 on ACER Aspire 2023WLMi */
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 51eb1e29860..efa8773bef5 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -736,7 +736,7 @@ unsigned int ata_sff_data_xfer(struct ata_device *dev, unsigned char *buf,
/*
* Use io*16_rep() accessors here as well to avoid pointlessly
- * swapping bytes to and fro on the big endian machines...
+ * swapping bytes to and from on the big endian machines...
*/
if (rw == READ) {
ioread16_rep(data_addr, pad, 1);
@@ -776,7 +776,7 @@ unsigned int ata_sff_data_xfer32(struct ata_device *dev, unsigned char *buf,
void __iomem *data_addr = ap->ioaddr.data_addr;
unsigned int words = buflen >> 2;
int slop = buflen & 3;
-
+
if (!(ap->pflags & ATA_PFLAG_PIO32))
return ata_sff_data_xfer(dev, buf, buflen, rw);
@@ -795,7 +795,7 @@ unsigned int ata_sff_data_xfer32(struct ata_device *dev, unsigned char *buf,
/*
* Use io*_rep() accessors here as well to avoid pointlessly
- * swapping bytes to and fro on the big endian machines...
+ * swapping bytes to and from on the big endian machines...
*/
if (rw == READ) {
if (slop < 3)
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index 403f56165ce..71cef9a962d 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -4,7 +4,7 @@
* Alan Cox <alan@lxorguk.ukuu.org.uk>
*
* based upon cs5535.c from AMD <Jens.Altmann@amd.com> as cleaned up and
- * made readable and Linux style by Wolfgang Zuleger <wolfgang.zuleger@gmx.de
+ * made readable and Linux style by Wolfgang Zuleger <wolfgang.zuleger@gmx.de>
* and Alexander Kiausch <alex.kiausch@t-online.de>
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 8a5d35b759d..ce4136eea08 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -43,9 +43,9 @@ enum {
/*
* SATA-FSL host controller supports a max. of (15+1) direct PRDEs, and
* chained indirect PRDEs upto a max count of 63.
- * We are allocating an array of 63 PRDEs contigiously, but PRDE#15 will
+ * We are allocating an array of 63 PRDEs contiguously, but PRDE#15 will
* be setup as an indirect descriptor, pointing to it's next
- * (contigious) PRDE. Though chained indirect PRDE arrays are
+ * (contiguous) PRDE. Though chained indirect PRDE arrays are
* supported,it will be more efficient to use a direct PRDT and
* a single chain/link to indirect PRDE array/PRDT.
*/
@@ -314,7 +314,7 @@ static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc,
u32 ttl_dwords = 0;
/*
- * NOTE : direct & indirect prdt's are contigiously allocated
+ * NOTE : direct & indirect prdt's are contiguously allocated
*/
struct prde *prd = (struct prde *)&((struct command_desc *)
cmd_desc)->prdt;
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index b2c1b37ab2e..f734b345ac7 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -1132,7 +1132,7 @@ static int rx_pkt(struct atm_dev *dev)
IF_ERR(printk(" cause: packet time out\n");)
}
else {
- IF_ERR(printk(" cause: buffer over flow\n");)
+ IF_ERR(printk(" cause: buffer overflow\n");)
}
goto out_free_desc;
}
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index 979d159b5cd..ee95c76bfd3 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -188,7 +188,7 @@ EXPORT_SYMBOL_GPL(wait_for_device_probe);
* @dev: device to try to bind to the driver
*
* This function returns -ENODEV if the device is not registered,
- * 1 if the device is bound sucessfully and 0 otherwise.
+ * 1 if the device is bound successfully and 0 otherwise.
*
* This function must be called with @dev->sem held. When called for a
* USB interface, @dev->parent->sem must be held as well.
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index 847a9e57570..a5af1d6dda8 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -1478,10 +1478,7 @@ void do_fd_request(struct request_queue * q)
stdma_lock(floppy_irq, NULL);
atari_disable_irq( IRQ_MFP_FDC );
- local_save_flags(flags); /* The request function is called with ints
- local_irq_disable(); * disabled... so must save the IPL for later */
redo_fd_request();
- local_irq_restore(flags);
atari_enable_irq( IRQ_MFP_FDC );
}
diff --git a/drivers/block/cciss_cmd.h b/drivers/block/cciss_cmd.h
index b50a9b261b8..6afa700890f 100644
--- a/drivers/block/cciss_cmd.h
+++ b/drivers/block/cciss_cmd.h
@@ -5,7 +5,7 @@
//###########################################################################
#define CISS_VERSION "1.00"
-//general boundary defintions
+//general boundary definitions
#define SENSEINFOBYTES 32//note that this value may vary between host implementations
#define MAXSGENTRIES 32
#define CCISS_SG_CHAIN 0x80000000
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index 1e6eb1aeba2..f36defa3776 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -535,7 +535,7 @@ static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv)
break;
default:
- BT_ERR("Unknow packet type:%d", type);
+ BT_ERR("Unknown packet type:%d", type);
print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, payload,
blksz * buf_block_len);
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 4895f0e0532..aa0919386b8 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -214,7 +214,7 @@ static int hci_uart_send_frame(struct sk_buff *skb)
struct hci_uart *hu;
if (!hdev) {
- BT_ERR("Frame for uknown device (hdev=NULL)");
+ BT_ERR("Frame for unknown device (hdev=NULL)");
return -ENODEV;
}
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index ad82ec92ebd..30eff80fed6 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -5,7 +5,7 @@
*
* Added devfs support.
* Jan-11-1998, C. Scott Ananian <cananian@alumni.princeton.edu>
- * Shared /dev/zero mmaping support, Feb 2000, Kanoj Sarcar <kanoj@sgi.com>
+ * Shared /dev/zero mmapping support, Feb 2000, Kanoj Sarcar <kanoj@sgi.com>
*/
#include <linux/mm.h>
diff --git a/drivers/char/mspec.c b/drivers/char/mspec.c
index 1997270bb6f..ecb89d798e3 100644
--- a/drivers/char/mspec.c
+++ b/drivers/char/mspec.c
@@ -248,7 +248,7 @@ static const struct vm_operations_struct mspec_vm_ops = {
/*
* mspec_mmap
*
- * Called when mmaping the device. Initializes the vma with a fault handler
+ * Called when mmapping the device. Initializes the vma with a fault handler
* and private data structure necessary to allocate, track, and free the
* underlying pages.
*/
diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c
index 6934025a1ac..c1d8b54c816 100644
--- a/drivers/char/n_r3964.c
+++ b/drivers/char/n_r3964.c
@@ -602,7 +602,7 @@ static void receive_char(struct r3964_info *pInfo, const unsigned char c)
}
break;
case R3964_WAIT_FOR_RX_REPEAT:
- /* FALLTROUGH */
+ /* FALLTHROUGH */
case R3964_IDLE:
if (c == STX) {
/* Prevent rx_queue from overflow: */
diff --git a/drivers/char/rio/route.h b/drivers/char/rio/route.h
index 20ed73f3fd7..46e963771c3 100644
--- a/drivers/char/rio/route.h
+++ b/drivers/char/rio/route.h
@@ -67,7 +67,7 @@
typedef struct COST_ROUTE COST_ROUTE;
struct COST_ROUTE {
unsigned char cost; /* Cost down this link */
- unsigned char route[NODE_BYTES]; /* Nodes thorough this route */
+ unsigned char route[NODE_BYTES]; /* Nodes through this route */
};
typedef struct ROUTE_STR ROUTE_STR;
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index 8e67d5c642a..6bd5f8866c7 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -315,7 +315,7 @@ EXPORT_SYMBOL(tty_termios_input_baud_rate);
* For maximal back compatibility with legacy SYS5/POSIX *nix behaviour
* we need to carefully set the bits when the user does not get the
* desired speed. We allow small margins and preserve as much of possible
- * of the input intent to keep compatiblity.
+ * of the input intent to keep compatibility.
*
* Locking: Caller should hold termios lock. This is already held
* when calling this function from the driver termios handler.
diff --git a/drivers/cpuidle/governor.c b/drivers/cpuidle/governor.c
index 70b59642a70..724c164d31c 100644
--- a/drivers/cpuidle/governor.c
+++ b/drivers/cpuidle/governor.c
@@ -21,7 +21,7 @@ struct cpuidle_governor *cpuidle_curr_governor;
* __cpuidle_find_governor - finds a governor of the specified name
* @str: the name
*
- * Must be called with cpuidle_lock aquired.
+ * Must be called with cpuidle_lock acquired.
*/
static struct cpuidle_governor * __cpuidle_find_governor(const char *str)
{
@@ -39,7 +39,7 @@ static struct cpuidle_governor * __cpuidle_find_governor(const char *str)
* @gov: the new target governor
*
* NOTE: "gov" can be NULL to specify disabled
- * Must be called with cpuidle_lock aquired.
+ * Must be called with cpuidle_lock acquired.
*/
int cpuidle_switch_governor(struct cpuidle_governor *gov)
{
diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c
index 5f753fc0873..09ad9154d86 100644
--- a/drivers/crypto/hifn_795x.c
+++ b/drivers/crypto/hifn_795x.c
@@ -863,7 +863,7 @@ static int hifn_init_pubrng(struct hifn_device *dev)
dev->dmareg |= HIFN_DMAIER_PUBDONE;
hifn_write_1(dev, HIFN_1_DMA_IER, dev->dmareg);
- dprintk("Chip %s: Public key engine has been sucessfully "
+ dprintk("Chip %s: Public key engine has been successfully "
"initialised.\n", dev->name);
}
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index 7585c4164bd..c52ac9efd0b 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -99,7 +99,7 @@ static struct at_desc *atc_alloc_descriptor(struct dma_chan *chan,
}
/**
- * atc_desc_get - get a unsused descriptor from free_list
+ * atc_desc_get - get an unused descriptor from free_list
* @atchan: channel we want a new descriptor for
*/
static struct at_desc *atc_desc_get(struct at_dma_chan *atchan)
diff --git a/drivers/firewire/core-topology.c b/drivers/firewire/core-topology.c
index 9a5f38c80b0..93ec64cdeef 100644
--- a/drivers/firewire/core-topology.c
+++ b/drivers/firewire/core-topology.c
@@ -183,7 +183,7 @@ static inline struct fw_node *fw_node(struct list_head *l)
* This function builds the tree representation of the topology given
* by the self IDs from the latest bus reset. During the construction
* of the tree, the function checks that the self IDs are valid and
- * internally consistent. On succcess this function returns the
+ * internally consistent. On success this function returns the
* fw_node corresponding to the local card otherwise NULL.
*/
static struct fw_node *build_tree(struct fw_card *card,
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 5cae0b3eee9..3f7c500b211 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -272,7 +272,7 @@ EXPORT_SYMBOL(drm_mode_object_find);
* functions & device file and adds it to the master fd list.
*
* RETURNS:
- * Zero on success, error code on falure.
+ * Zero on success, error code on failure.
*/
int drm_framebuffer_init(struct drm_device *dev, struct drm_framebuffer *fb,
const struct drm_framebuffer_funcs *funcs)
@@ -2328,7 +2328,7 @@ int drm_mode_connector_property_set_ioctl(struct drm_device *dev,
} else if (connector->funcs->set_property)
ret = connector->funcs->set_property(connector, property, out_resp->value);
- /* store the property value if succesful */
+ /* store the property value if successful */
if (!ret)
drm_connector_property_set_value(connector, property, out_resp->value);
out:
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index abfc27b0c2e..a2a3fa59992 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1309,7 +1309,7 @@ out_free_list:
* i915_gem_release_mmap - remove physical page mappings
* @obj: obj in question
*
- * Preserve the reservation of the mmaping with the DRM core code, but
+ * Preserve the reservation of the mmapping with the DRM core code, but
* relinquish ownership of the pages back to the system.
*
* It is vital that we remove the page mapping if we have mapped a tiled
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 2b0fe54cd92..40fcf6fdef3 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -70,7 +70,7 @@ static struct drm_fb_helper_funcs intel_fb_helper_funcs = {
/**
- * Curretly it is assumed that the old framebuffer is reused.
+ * Currently it is assumed that the old framebuffer is reused.
*
* LOCKING
* caller should hold the mode config lock.
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 083bec2e50f..e7fa3279e2f 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -2726,7 +2726,7 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device)
/* Wrap with our custom algo which switches to DDC mode */
intel_output->ddc_bus->algo = &intel_sdvo_i2c_bit_algo;
- /* In defaut case sdvo lvds is false */
+ /* In default case sdvo lvds is false */
intel_sdvo_get_capabilities(intel_output, &sdvo_priv->caps);
if (intel_sdvo_output_setup(intel_output,
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index c11ddddfb3b..6643afc36ce 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -1141,7 +1141,7 @@ typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS {
/* ucTableFormatRevision=1,ucTableContentRevision=2 */
typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS_V2 {
USHORT usPixelClock; /* in 10KHz; for bios convenient */
- UCHAR ucMisc; /* see PANEL_ENCODER_MISC_xx defintions below */
+ UCHAR ucMisc; /* see PANEL_ENCODER_MISC_xx definitions below */
UCHAR ucAction; /* 0: turn off encoder */
/* 1: setup and turn on encoder */
UCHAR ucTruncate; /* bit0=0: Disable truncate */
@@ -1424,7 +1424,7 @@ typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO {
/* Structures used in FirmwareInfoTable */
/****************************************************************************/
-/* usBIOSCapability Defintion: */
+/* usBIOSCapability Definition: */
/* Bit 0 = 0: Bios image is not Posted, =1:Bios image is Posted; */
/* Bit 1 = 0: Dual CRTC is not supported, =1: Dual CRTC is supported; */
/* Bit 2 = 0: Extended Desktop is not supported, =1: Extended Desktop is supported; */
@@ -2386,7 +2386,7 @@ typedef struct _ATOM_ANALOG_TV_INFO_V1_2 {
} ATOM_ANALOG_TV_INFO_V1_2;
/**************************************************************************/
-/* VRAM usage and their defintions */
+/* VRAM usage and their definitions */
/* One chunk of VRAM used by Bios are for HWICON surfaces,EDID data. */
/* Current Mode timing and Dail Timing and/or STD timing data EACH device. They can be broken down as below. */
@@ -3046,7 +3046,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO {
#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_DC 2
#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LITEAC 3
-/* Byte aligned defintion for BIOS usage */
+/* Byte aligned definition for BIOS usage */
#define ATOM_S0_CRT1_MONOb0 0x01
#define ATOM_S0_CRT1_COLORb0 0x02
#define ATOM_S0_CRT1_MASKb0 (ATOM_S0_CRT1_MONOb0+ATOM_S0_CRT1_COLORb0)
@@ -3131,7 +3131,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO {
#define ATOM_S2_DISPLAY_ROTATION_DEGREE_SHIFT 30
#define ATOM_S2_DISPLAY_ROTATION_ANGLE_MASK 0xC0000000L
-/* Byte aligned defintion for BIOS usage */
+/* Byte aligned definition for BIOS usage */
#define ATOM_S2_TV1_STANDARD_MASKb0 0x0F
#define ATOM_S2_CURRENT_BL_LEVEL_MASKb1 0xFF
#define ATOM_S2_CRT1_DPMS_STATEb2 0x01
@@ -3190,7 +3190,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO {
#define ATOM_S3_ALLOW_FAST_PWR_SWITCH 0x40000000L
#define ATOM_S3_RQST_GPU_USE_MIN_PWR 0x80000000L
-/* Byte aligned defintion for BIOS usage */
+/* Byte aligned definition for BIOS usage */
#define ATOM_S3_CRT1_ACTIVEb0 0x01
#define ATOM_S3_LCD1_ACTIVEb0 0x02
#define ATOM_S3_TV1_ACTIVEb0 0x04
@@ -3230,7 +3230,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO {
#define ATOM_S4_LCD1_REFRESH_MASK 0x0000FF00L
#define ATOM_S4_LCD1_REFRESH_SHIFT 8
-/* Byte aligned defintion for BIOS usage */
+/* Byte aligned definition for BIOS usage */
#define ATOM_S4_LCD1_PANEL_ID_MASKb0 0x0FF
#define ATOM_S4_LCD1_REFRESH_MASKb1 ATOM_S4_LCD1_PANEL_ID_MASKb0
#define ATOM_S4_VRAM_INFO_MASKb2 ATOM_S4_LCD1_PANEL_ID_MASKb0
@@ -3310,7 +3310,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO {
#define ATOM_S6_VRI_BRIGHTNESS_CHANGE 0x40000000L
#define ATOM_S6_CONFIG_DISPLAY_CHANGE_MASK 0x80000000L
-/* Byte aligned defintion for BIOS usage */
+/* Byte aligned definition for BIOS usage */
#define ATOM_S6_DEVICE_CHANGEb0 0x01
#define ATOM_S6_SCALER_CHANGEb0 0x02
#define ATOM_S6_LID_CHANGEb0 0x04
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 278f646bc18..6740ed24358 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -394,11 +394,11 @@ int r600_mc_init(struct radeon_device *rdev)
* AGP so that GPU can catch out of VRAM/AGP access
*/
if (rdev->mc.gtt_location > rdev->mc.mc_vram_size) {
- /* Enought place before */
+ /* Enough place before */
rdev->mc.vram_location = rdev->mc.gtt_location -
rdev->mc.mc_vram_size;
} else if (tmp > rdev->mc.mc_vram_size) {
- /* Enought place after */
+ /* Enough place after */
rdev->mc.vram_location = rdev->mc.gtt_location +
rdev->mc.gtt_size;
} else {
diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c
index b38c4c8e2c6..d10eb43645c 100644
--- a/drivers/gpu/drm/radeon/radeon_fb.c
+++ b/drivers/gpu/drm/radeon/radeon_fb.c
@@ -59,7 +59,7 @@ static struct fb_ops radeonfb_ops = {
};
/**
- * Curretly it is assumed that the old framebuffer is reused.
+ * Currently it is assumed that the old framebuffer is reused.
*
* LOCKING
* caller should hold the mode config lock.
diff --git a/drivers/gpu/drm/radeon/radeon_state.c b/drivers/gpu/drm/radeon/radeon_state.c
index 38537d971a3..067167cb39c 100644
--- a/drivers/gpu/drm/radeon/radeon_state.c
+++ b/drivers/gpu/drm/radeon/radeon_state.c
@@ -1950,7 +1950,7 @@ static void radeon_apply_surface_regs(int surf_index,
* Note that refcount can be at most 2, since during a free refcount=3
* might mean we have to allocate a new surface which might not always
* be available.
- * For example : we allocate three contigous surfaces ABC. If B is
+ * For example : we allocate three contiguous surfaces ABC. If B is
* freed, we suddenly need two surfaces to store A and C, which might
* not always be available.
*/
diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c
index 1381e06d6af..eda4ade24c3 100644
--- a/drivers/gpu/drm/radeon/radeon_ttm.c
+++ b/drivers/gpu/drm/radeon/radeon_ttm.c
@@ -378,7 +378,7 @@ static int radeon_bo_move(struct ttm_buffer_object *bo,
new_mem->mem_type == TTM_PL_SYSTEM) ||
(old_mem->mem_type == TTM_PL_SYSTEM &&
new_mem->mem_type == TTM_PL_TT)) {
- /* bind is enought */
+ /* bind is enough */
radeon_move_null(bo, new_mem);
return 0;
}
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index b0efd0ddae7..5e06ee7076f 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -829,11 +829,11 @@ int rv770_mc_init(struct radeon_device *rdev)
* AGP so that GPU can catch out of VRAM/AGP access
*/
if (rdev->mc.gtt_location > rdev->mc.mc_vram_size) {
- /* Enought place before */
+ /* Enough place before */
rdev->mc.vram_location = rdev->mc.gtt_location -
rdev->mc.mc_vram_size;
} else if (tmp > rdev->mc.mc_vram_size) {
- /* Enought place after */
+ /* Enough place after */
rdev->mc.vram_location = rdev->mc.gtt_location +
rdev->mc.gtt_size;
} else {
diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c
index c70927ecda2..61c5572d2b9 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_util.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_util.c
@@ -427,7 +427,7 @@ static int ttm_bo_kmap_ttm(struct ttm_buffer_object *bo,
/*
* We need to use vmap to get the desired page protection
- * or to make the buffer object look contigous.
+ * or to make the buffer object look contiguous.
*/
prot = (mem->placement & TTM_PL_FLAG_CACHED) ?
PAGE_KERNEL :
diff --git a/drivers/hwmon/adm1029.c b/drivers/hwmon/adm1029.c
index 36718150b47..e845b75ccee 100644
--- a/drivers/hwmon/adm1029.c
+++ b/drivers/hwmon/adm1029.c
@@ -432,7 +432,7 @@ static int adm1029_remove(struct i2c_client *client)
}
/*
-function that update the status of the chips (temperature for exemple)
+function that update the status of the chips (temperature for example)
*/
static struct adm1029_data *adm1029_update_device(struct device *dev)
{
diff --git a/drivers/hwmon/lm93.c b/drivers/hwmon/lm93.c
index fc36cadf36f..c48a284b831 100644
--- a/drivers/hwmon/lm93.c
+++ b/drivers/hwmon/lm93.c
@@ -928,7 +928,7 @@ static void lm93_update_client_common(struct lm93_data *data,
data->prochot_interval = lm93_read_byte(client,
LM93_REG_PROCHOT_INTERVAL);
- /* Fan Boost Termperature registers */
+ /* Fan Boost Temperature registers */
for (i = 0; i < 4; i++)
data->boost[i] = lm93_read_byte(client, LM93_REG_BOOST(i));
diff --git a/drivers/ieee1394/dv1394.c b/drivers/ieee1394/dv1394.c
index 2cd00b5b45b..9fd4a0d3206 100644
--- a/drivers/ieee1394/dv1394.c
+++ b/drivers/ieee1394/dv1394.c
@@ -125,7 +125,7 @@
0 - no debugging messages
1 - some debugging messages, but none during DMA frame transmission
2 - lots of messages, including during DMA frame transmission
- (will cause undeflows if your machine is too slow!)
+ (will cause underflows if your machine is too slow!)
*/
#define DV1394_DEBUG_LEVEL 0
diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.c b/drivers/infiniband/hw/cxgb3/cxio_hal.c
index 72ed3396b72..0677fc7dfd5 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_hal.c
+++ b/drivers/infiniband/hw/cxgb3/cxio_hal.c
@@ -589,7 +589,7 @@ static int cxio_hal_destroy_ctrl_qp(struct cxio_rdev *rdev_p)
/* write len bytes of data into addr (32B aligned address)
* If data is NULL, clear len byte of memory to zero.
- * caller aquires the ctrl_qp lock before the call
+ * caller acquires the ctrl_qp lock before the call
*/
static int cxio_hal_ctrl_qp_write_mem(struct cxio_rdev *rdev_p, u32 addr,
u32 len, void *data)
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c
index 4bd39c8af80..37d12e5efa4 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6110.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c
@@ -381,7 +381,7 @@ static const ipath_err_t infinipath_hwe_htclnkbbyte1crcerr =
#define IPATH_GPIO_SCL \
(1ULL << (_IPATH_GPIO_SCL_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT))
-/* keep the code below somewhat more readonable; not used elsewhere */
+/* keep the code below somewhat more readable; not used elsewhere */
#define _IPATH_HTLINK0_CRCBITS (infinipath_hwe_htclnkabyte0crcerr | \
infinipath_hwe_htclnkabyte1crcerr)
#define _IPATH_HTLINK1_CRCBITS (infinipath_hwe_htclnkbbyte0crcerr | \
diff --git a/drivers/infiniband/hw/ipath/ipath_sd7220.c b/drivers/infiniband/hw/ipath/ipath_sd7220.c
index aa47eb54952..2a68d9f624d 100644
--- a/drivers/infiniband/hw/ipath/ipath_sd7220.c
+++ b/drivers/infiniband/hw/ipath/ipath_sd7220.c
@@ -614,7 +614,7 @@ static int epb_trans(struct ipath_devdata *dd, u16 reg, u64 i_val, u64 *o_vp)
* @wd: Write Data - value to set in register
* @mask: ones where data should be spliced into reg.
*
- * Basic register read/modify/write, with un-needed acesses elided. That is,
+ * Basic register read/modify/write, with un-needed accesses elided. That is,
* a mask of zero will prevent write, while a mask of 0xFF will prevent read.
* returns current (presumed, if a write was done) contents of selected
* register, or <0 if errors.
@@ -989,7 +989,7 @@ static struct rxeq_init {
/* Set DFELTHFDR/HDR thresholds */
RXEQ_VAL(7, 8, 0, 0, 0, 0), /* FDR */
RXEQ_VAL(7, 0x21, 0, 0, 0, 0), /* HDR */
- /* Set TLTHFDR/HDR theshold */
+ /* Set TLTHFDR/HDR threshold */
RXEQ_VAL(7, 9, 2, 2, 2, 2), /* FDR */
RXEQ_VAL(7, 0x23, 2, 2, 2, 2), /* HDR */
/* Set Preamp setting 2 (ZFR/ZCNT) */
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 219b10397b4..256a00c6aee 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -352,7 +352,7 @@ static int set_kernel_sq_size(struct mlx4_ib_dev *dev, struct ib_qp_cap *cap,
* anymore, so we do this only if selective signaling is off.
*
* Further, on 32-bit platforms, we can't use vmap() to make
- * the QP buffer virtually contigious. Thus we have to use
+ * the QP buffer virtually contiguous. Thus we have to use
* constant-sized WRs to make sure a WR is always fully within
* a single page-sized chunk.
*
diff --git a/drivers/infiniband/ulp/iser/iser_verbs.c b/drivers/infiniband/ulp/iser/iser_verbs.c
index ea9e1556e0d..8579f32ce38 100644
--- a/drivers/infiniband/ulp/iser/iser_verbs.c
+++ b/drivers/infiniband/ulp/iser/iser_verbs.c
@@ -499,7 +499,7 @@ void iser_conn_init(struct iser_conn *ib_conn)
/**
* starts the process of connecting to the target
- * sleeps untill the connection is established or rejected
+ * sleeps until the connection is established or rejected
*/
int iser_connect(struct iser_conn *ib_conn,
struct sockaddr_in *src_addr,
diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
index 1c9410d1822..bcc2d30ec24 100644
--- a/drivers/input/serio/hp_sdc.c
+++ b/drivers/input/serio/hp_sdc.c
@@ -955,7 +955,7 @@ static int __init hp_sdc_init_hppa(struct parisc_device *d)
INIT_DELAYED_WORK(&moduleloader_work, request_module_delayed);
ret = hp_sdc_init();
- /* after sucessfull initialization give SDC some time to settle
+ /* after successfull initialization give SDC some time to settle
* and then load the hp_sdc_mlc upper layer driver */
if (!ret)
schedule_delayed_work(&moduleloader_work,
diff --git a/drivers/input/serio/hp_sdc_mlc.c b/drivers/input/serio/hp_sdc_mlc.c
index 820e51673b2..7d2b820ef58 100644
--- a/drivers/input/serio/hp_sdc_mlc.c
+++ b/drivers/input/serio/hp_sdc_mlc.c
@@ -125,7 +125,7 @@ static void hp_sdc_mlc_isr (int irq, void *dev_id,
break;
default:
- printk(KERN_WARNING PREFIX "Unkown HIL Error status (%x)!\n", data);
+ printk(KERN_WARNING PREFIX "Unknown HIL Error status (%x)!\n", data);
break;
}
diff --git a/drivers/input/touchscreen/atmel-wm97xx.c b/drivers/input/touchscreen/atmel-wm97xx.c
index 35377f583e2..a12242f77e2 100644
--- a/drivers/input/touchscreen/atmel-wm97xx.c
+++ b/drivers/input/touchscreen/atmel-wm97xx.c
@@ -59,7 +59,7 @@
#define ATMEL_WM97XX_AC97C_IRQ (29)
#define ATMEL_WM97XX_GPIO_DEFAULT (32+16) /* Pin 16 on port B. */
#else
-#error Unkown CPU, this driver only supports AT32AP700X CPUs.
+#error Unknown CPU, this driver only supports AT32AP700X CPUs.
#endif
struct continuous {
diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c
index 8fc3b08deb3..6cdcf2a6e03 100644
--- a/drivers/input/touchscreen/mainstone-wm97xx.c
+++ b/drivers/input/touchscreen/mainstone-wm97xx.c
@@ -14,7 +14,7 @@
*
* Notes:
* This is a wm97xx extended touch driver to capture touch
- * data in a continuous manner on the Intel XScale archictecture
+ * data in a continuous manner on the Intel XScale architecture
*
* Features:
* - codecs supported:- WM9705, WM9712, WM9713
@@ -131,7 +131,7 @@ static int wm97xx_acc_pen_down(struct wm97xx *wm)
/* When the AC97 queue has been drained we need to allow time
* to buffer up samples otherwise we end up spinning polling
* for samples. The controller can't have a suitably low
- * threashold set to use the notifications it gives.
+ * threshold set to use the notifications it gives.
*/
schedule_timeout_uninterruptible(1);
diff --git a/drivers/input/touchscreen/zylonite-wm97xx.c b/drivers/input/touchscreen/zylonite-wm97xx.c
index 41e4359c277..eca54dbdf49 100644
--- a/drivers/input/touchscreen/zylonite-wm97xx.c
+++ b/drivers/input/touchscreen/zylonite-wm97xx.c
@@ -96,7 +96,7 @@ static int wm97xx_acc_pen_down(struct wm97xx *wm)
/* When the AC97 queue has been drained we need to allow time
* to buffer up samples otherwise we end up spinning polling
* for samples. The controller can't have a suitably low
- * threashold set to use the notifications it gives.
+ * threshold set to use the notifications it gives.
*/
msleep(1);
diff --git a/drivers/isdn/act2000/Kconfig b/drivers/isdn/act2000/Kconfig
index 3fc1a5434ef..fa2673fc69c 100644
--- a/drivers/isdn/act2000/Kconfig
+++ b/drivers/isdn/act2000/Kconfig
@@ -1,6 +1,3 @@
-#
-# Config.in for IBM Active 2000 ISDN driver
-#
config ISDN_DRV_ACT2000
tristate "IBM Active 2000 support"
depends on ISA
@@ -10,4 +7,3 @@ config ISDN_DRV_ACT2000
into the card using a utility which is part of the latest
isdn4k-utils package. Please read the file
<file:Documentation/isdn/README.act2000> for more information.
-
diff --git a/drivers/isdn/capi/Kconfig b/drivers/isdn/capi/Kconfig
index e1afd60924f..b2a04755c96 100644
--- a/drivers/isdn/capi/Kconfig
+++ b/drivers/isdn/capi/Kconfig
@@ -1,6 +1,3 @@
-#
-# Config.in for the CAPI subsystem
-#
config ISDN_DRV_AVMB1_VERBOSE_REASON
bool "Verbose reason code reporting"
default y
@@ -59,4 +56,3 @@ config ISDN_CAPI_CAPIDRV
the legacy isdn4linux link layer. If you have a card which is
supported by a CAPI driver, but still want to use old features like
ippp interfaces or ttyI emulation, say Y/M here.
-
diff --git a/drivers/isdn/capi/capidrv.c b/drivers/isdn/capi/capidrv.c
index 3e6d17f42a9..66b7d7a8647 100644
--- a/drivers/isdn/capi/capidrv.c
+++ b/drivers/isdn/capi/capidrv.c
@@ -830,7 +830,7 @@ static void handle_controller(_cmsg * cmsg)
case 0: break;
case 1: s = "unknown class"; break;
case 2: s = "unknown function"; break;
- default: s = "unkown error"; break;
+ default: s = "unknown error"; break;
}
if (s)
printk(KERN_INFO "capidrv-%d: %s from controller 0x%x function %d: %s\n",
diff --git a/drivers/isdn/hardware/eicon/di.c b/drivers/isdn/hardware/eicon/di.c
index b029d130eb2..cb14ae3e715 100644
--- a/drivers/isdn/hardware/eicon/di.c
+++ b/drivers/isdn/hardware/eicon/di.c
@@ -806,7 +806,7 @@ static void xdi_xlog_request (byte Adapter, byte Id,
DELIVERY - indication entered isdn_rc function
RNR=... - application had returned RNR=... after the
look ahead callback
- RNum=0 - aplication had not returned any buffer to copy
+ RNum=0 - application had not returned any buffer to copy
this indication and will copy it self
COMPLETE - XDI had copied the data to the buffers provided
bu the application and is about to issue the
diff --git a/drivers/isdn/hardware/eicon/maintidi.c b/drivers/isdn/hardware/eicon/maintidi.c
index 41c26e75645..534978bdf38 100644
--- a/drivers/isdn/hardware/eicon/maintidi.c
+++ b/drivers/isdn/hardware/eicon/maintidi.c
@@ -385,7 +385,7 @@ static int SuperTraceMessageInput (void* hLib) {
}
break;
default:
- diva_mnt_internal_dprintf (0, DLI_ERR, "Unknon IDI Ind (DMA mode): %02x", Ind);
+ diva_mnt_internal_dprintf (0, DLI_ERR, "Unknown IDI Ind (DMA mode): %02x", Ind);
}
p += (this_ind_length+1);
total_length -= (4 + this_ind_length);
@@ -420,7 +420,7 @@ static int SuperTraceMessageInput (void* hLib) {
}
break;
default:
- diva_mnt_internal_dprintf (0, DLI_ERR, "Unknon IDI Ind: %02x", Ind);
+ diva_mnt_internal_dprintf (0, DLI_ERR, "Unknown IDI Ind: %02x", Ind);
}
}
}
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index fc46a26cb14..a64bb6c67ba 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -721,7 +721,7 @@ hfcsusb_setup_bch(struct bchannel *bch, int protocol)
switch (protocol) {
case (-1): /* used for init */
bch->state = -1;
- /* fall trough */
+ /* fall through */
case (ISDN_P_NONE):
if (bch->state == ISDN_P_NONE)
return 0; /* already in idle state */
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.h b/drivers/isdn/hardware/mISDN/hfcsusb.h
index 43efe7358fa..369196adae0 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.h
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.h
@@ -150,7 +150,7 @@ symbolic(struct hfcusb_symbolic_list list[], const int num)
for (i = 0; list[i].name != NULL; i++)
if (list[i].num == num)
return list[i].name;
- return "<unkown USB Error>";
+ return "<unknown USB Error>";
}
/* USB descriptor need to contain one of the following EndPoint combination: */
diff --git a/drivers/isdn/hardware/mISDN/mISDNisar.c b/drivers/isdn/hardware/mISDN/mISDNisar.c
index de352a17673..09095c74711 100644
--- a/drivers/isdn/hardware/mISDN/mISDNisar.c
+++ b/drivers/isdn/hardware/mISDN/mISDNisar.c
@@ -860,7 +860,7 @@ isar_pump_statev_modem(struct isar_ch *ch, u8 devt) {
pr_debug("%s: pump stev GSTN CLEAR\n", ch->is->name);
break;
default:
- pr_info("u%s: nknown pump stev %x\n", ch->is->name, devt);
+ pr_info("u%s: unknown pump stev %x\n", ch->is->name, devt);
break;
}
}
diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c
index a420b64472e..aaaeaafd86f 100644
--- a/drivers/isdn/hisax/hfc_usb.c
+++ b/drivers/isdn/hisax/hfc_usb.c
@@ -1086,7 +1086,7 @@ hfc_usb_l2l1(struct hisax_if *my_hisax_if, int pr, void *arg)
break;
default:
DBG(HFCUSB_DBG_STATES,
- "HFC_USB: hfc_usb_d_l2l1: unkown state : %#x", pr);
+ "HFC_USB: hfc_usb_d_l2l1: unknown state : %#x", pr);
break;
}
}
diff --git a/drivers/isdn/hysdn/Kconfig b/drivers/isdn/hysdn/Kconfig
index c9e4231968e..e86bc6583d7 100644
--- a/drivers/isdn/hysdn/Kconfig
+++ b/drivers/isdn/hysdn/Kconfig
@@ -1,6 +1,3 @@
-#
-# Config.in for HYSDN ISDN driver
-#
config HYSDN
tristate "Hypercope HYSDN cards (Champ, Ergo, Metro) support (module only)"
depends on m && PROC_FS && PCI
@@ -15,4 +12,3 @@ config HYSDN_CAPI
depends on HYSDN && ISDN_CAPI
help
Say Y here if you like to use Hypercope's CAPI 2.0 interface.
-
diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c
index 90b56ed8651..507e13d9a57 100644
--- a/drivers/isdn/i4l/isdn_net.c
+++ b/drivers/isdn/i4l/isdn_net.c
@@ -1563,7 +1563,7 @@ isdn_net_ciscohdlck_slarp_send_keepalive(unsigned long data)
*(__be32 *)(p + 4) = cpu_to_be32(CISCO_SLARP_KEEPALIVE);
*(__be32 *)(p + 8) = cpu_to_be32(lp->cisco_myseq);
*(__be32 *)(p + 12) = cpu_to_be32(lp->cisco_yourseq);
- *(__be16 *)(p + 16) = cpu_to_be16(0xffff); // reliablity, always 0xffff
+ *(__be16 *)(p + 16) = cpu_to_be16(0xffff); // reliability, always 0xffff
p += 18;
isdn_net_write_super(lp, skb);
diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c
index 642d5aaf53c..45df6675e8e 100644
--- a/drivers/isdn/i4l/isdn_ppp.c
+++ b/drivers/isdn/i4l/isdn_ppp.c
@@ -836,7 +836,7 @@ isdn_ppp_write(int min, struct file *file, const char __user *buf, int count)
unsigned short hl;
struct sk_buff *skb;
/*
- * we need to reserve enought space in front of
+ * we need to reserve enough space in front of
* sk_buff. old call to dev_alloc_skb only reserved
* 16 bytes, now we are looking what the driver want
*/
@@ -1326,7 +1326,7 @@ isdn_ppp_xmit(struct sk_buff *skb, struct net_device *netdev)
struct sk_buff *new_skb;
unsigned short hl;
/*
- * we need to reserve enought space in front of
+ * we need to reserve enough space in front of
* sk_buff. old call to dev_alloc_skb only reserved
* 16 bytes, now we are looking what the driver want.
*/
@@ -1674,7 +1674,7 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp,
* - insert new fragment into the proper sequence slot (once that's done
* newfrag will be set to NULL)
* - reassemble any complete fragment sequence (non-null 'start'
- * indicates there is a continguous sequence present)
+ * indicates there is a contiguous sequence present)
* - discard any incomplete sequences that are below minseq -- due
* to the fact that sender always increment sequence number, if there
* is an incomplete sequence below minseq, no new fragments would
diff --git a/drivers/isdn/i4l/isdn_ttyfax.c b/drivers/isdn/i4l/isdn_ttyfax.c
index 78f7660c1d0..4c41f191d4e 100644
--- a/drivers/isdn/i4l/isdn_ttyfax.c
+++ b/drivers/isdn/i4l/isdn_ttyfax.c
@@ -470,7 +470,7 @@ isdn_tty_cmd_FCLASS2(char **p, modem_info * info)
}
return 0;
}
- /* BADMUL=value - dummy 0=disable errorchk disabled (treshold multiplier) */
+ /* BADMUL=value - dummy 0=disable errorchk disabled (threshold multiplier) */
if (!strncmp(p[0], "BADMUL", 6)) {
p[0] += 6;
switch (*p[0]) {
diff --git a/drivers/isdn/icn/Kconfig b/drivers/isdn/icn/Kconfig
index 89d15eed765..4534f21a185 100644
--- a/drivers/isdn/icn/Kconfig
+++ b/drivers/isdn/icn/Kconfig
@@ -1,6 +1,3 @@
-#
-# Config.in for ICN ISDN driver
-#
config ISDN_DRV_ICN
tristate "ICN 2B and 4B support"
depends on ISA
@@ -13,4 +10,3 @@ config ISDN_DRV_ICN
separately. See <file:Documentation/isdn/README> and
<file:Documentation/isdn/README.icn> for more
information.
-
diff --git a/drivers/isdn/mISDN/dsp_core.c b/drivers/isdn/mISDN/dsp_core.c
index 77ee2867c8b..43ff4d3b046 100644
--- a/drivers/isdn/mISDN/dsp_core.c
+++ b/drivers/isdn/mISDN/dsp_core.c
@@ -110,7 +110,7 @@
* crossconnections and conferences via software if not possible through
* hardware. If hardware capability is available, hardware is used.
*
- * Echo: Is generated by CMX and is used to check performane of hard and
+ * Echo: Is generated by CMX and is used to check performance of hard and
* software CMX.
*
* The CMX has special functions for conferences with one, two and more
diff --git a/drivers/isdn/mISDN/tei.c b/drivers/isdn/mISDN/tei.c
index e04bad6c5ba..6d4da609588 100644
--- a/drivers/isdn/mISDN/tei.c
+++ b/drivers/isdn/mISDN/tei.c
@@ -725,7 +725,7 @@ tei_id_ver_tout_net(struct FsmInst *fi, int event, void *arg)
if (tm->rcnt == 1) {
if (*debug & DEBUG_L2_TEI)
tm->tei_m.printdebug(fi,
- "check req for tei %d sucessful\n", tm->l2->tei);
+ "check req for tei %d successful\n", tm->l2->tei);
mISDN_FsmChangeState(fi, ST_TEI_NOP);
} else if (tm->rcnt > 1) {
/* duplicate assignment; remove */
diff --git a/drivers/isdn/pcbit/Kconfig b/drivers/isdn/pcbit/Kconfig
index ffba6eca124..e9b2dd85d41 100644
--- a/drivers/isdn/pcbit/Kconfig
+++ b/drivers/isdn/pcbit/Kconfig
@@ -1,6 +1,3 @@
-#
-# Config.in for PCBIT ISDN driver
-#
config ISDN_DRV_PCBIT
tristate "PCBIT-D support"
depends on ISA && (BROKEN || X86)
@@ -11,4 +8,3 @@ config ISDN_DRV_PCBIT
the card using a utility which is distributed separately. See
<file:Documentation/isdn/README> and
<file:Documentation/isdn/README.pcbit> for more information.
-
diff --git a/drivers/isdn/sc/Kconfig b/drivers/isdn/sc/Kconfig
index e6510ca7bf4..7469863a792 100644
--- a/drivers/isdn/sc/Kconfig
+++ b/drivers/isdn/sc/Kconfig
@@ -1,6 +1,3 @@
-#
-# Config.in for Spellcaster ISDN driver
-#
config ISDN_DRV_SC
tristate "Spellcaster support"
depends on ISA
@@ -9,4 +6,3 @@ config ISDN_DRV_SC
driver currently builds only in a modularized version.
To build it, choose M here: the module will be called sc.
See <file:Documentation/isdn/README.sc> for more information.
-
diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c
index 8b9364434aa..3fbe41b0ac0 100644
--- a/drivers/macintosh/therm_windtunnel.c
+++ b/drivers/macintosh/therm_windtunnel.c
@@ -15,7 +15,7 @@
*
* WARNING: This driver has only been testen on Apple's
* 1.25 MHz Dual G4 (March 03). It is tuned for a CPU
- * temperatur around 57 C.
+ * temperature around 57 C.
*
* Copyright (C) 2003, 2004 Samuel Rydh (samuel@ibrium.se)
*
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index ed103816401..e412980763b 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -988,7 +988,7 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv)
goto bad_cipher;
}
- /* Compatiblity mode for old dm-crypt cipher strings */
+ /* Compatibility mode for old dm-crypt cipher strings */
if (!chainmode || (strcmp(chainmode, "plain") == 0 && !ivmode)) {
chainmode = "cbc";
ivmode = "plain";
diff --git a/drivers/media/common/saa7146_i2c.c b/drivers/media/common/saa7146_i2c.c
index 7e8f5681599..48cb154c7a4 100644
--- a/drivers/media/common/saa7146_i2c.c
+++ b/drivers/media/common/saa7146_i2c.c
@@ -98,7 +98,7 @@ static int saa7146_i2c_msg_cleanup(const struct i2c_msg *m, int num, __le32 *op)
op_count++;
- /* loop throgh all bytes of message i */
+ /* loop through all bytes of message i */
for(j = 0; j < m[i].len; j++) {
/* write back all bytes that could have been read */
m[i].buf[j] = (le32_to_cpu(op[op_count/3]) >> ((3-(op_count%3))*8));
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h
index 810f07d6324..52e4ce4304e 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.h
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.h
@@ -160,7 +160,7 @@ struct tuner_state {
* search callback possible return status
*
* DVBFE_ALGO_SEARCH_SUCCESS
- * The frontend search algorithm completed and returned succesfully
+ * The frontend search algorithm completed and returned successfully
*
* DVBFE_ALGO_SEARCH_ASLEEP
* The frontend search algorithm is sleeping
diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c
index 0241a7c5c34..8b8558fcb04 100644
--- a/drivers/media/dvb/dvb-core/dvb_net.c
+++ b/drivers/media/dvb/dvb-core/dvb_net.c
@@ -1396,7 +1396,7 @@ static int dvb_net_do_ioctl(struct inode *inode, struct file *file,
return ret;
}
- /* binary compatiblity cruft */
+ /* binary compatibility cruft */
case __NET_ADD_IF_OLD:
{
struct __dvb_net_if_old *dvbnetif = parg;
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index 2ae7f648eff..bb69f3719f9 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -344,7 +344,7 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
if (ret)
return ret;
- err("Unkown Anysee version: %02x %02x %02x. "\
+ err("Unknown Anysee version: %02x %02x %02x. "\
"Please report the <linux-dvb@linuxtv.org>.",
hw_info[0], hw_info[1], hw_info[2]);
diff --git a/drivers/media/dvb/dvb-usb/dibusb-mb.c b/drivers/media/dvb/dvb-usb/dibusb-mb.c
index eeef50bff4f..5c0126dc1ff 100644
--- a/drivers/media/dvb/dvb-usb/dibusb-mb.c
+++ b/drivers/media/dvb/dvb-usb/dibusb-mb.c
@@ -242,7 +242,7 @@ static struct dvb_usb_device_properties dibusb1_1_properties = {
{ &dibusb_dib3000mb_table[9], &dibusb_dib3000mb_table[11], NULL },
{ &dibusb_dib3000mb_table[10], &dibusb_dib3000mb_table[12], NULL },
},
- { "Unkown USB1.1 DVB-T device ???? please report the name to the author",
+ { "Unknown USB1.1 DVB-T device ???? please report the name to the author",
{ &dibusb_dib3000mb_table[13], NULL },
{ &dibusb_dib3000mb_table[14], NULL },
},
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
index edde87c6aa3..6b5ded9e7d5 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
@@ -259,7 +259,7 @@ int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *d,
*state = REMOTE_KEY_REPEAT;
break;
default:
- deb_err("unkown type of remote status: %d\n",keybuf[0]);
+ deb_err("unknown type of remote status: %d\n",keybuf[0]);
break;
}
return 0;
diff --git a/drivers/media/dvb/dvb-usb/usb-urb.c b/drivers/media/dvb/dvb-usb/usb-urb.c
index 9da2cc95ca1..f9702e3756b 100644
--- a/drivers/media/dvb/dvb-usb/usb-urb.c
+++ b/drivers/media/dvb/dvb-usb/usb-urb.c
@@ -56,7 +56,7 @@ static void usb_urb_complete(struct urb *urb)
stream->complete(stream, b, urb->actual_length);
break;
default:
- err("unkown endpoint type in completition handler.");
+ err("unknown endpoint type in completition handler.");
return;
}
usb_submit_urb(urb,GFP_ATOMIC);
@@ -228,7 +228,7 @@ int usb_urb_init(struct usb_data_stream *stream, struct usb_data_stream_properti
case USB_ISOC:
return usb_isoc_urb_init(stream);
default:
- err("unkown URB-type for data transfer.");
+ err("unknown URB-type for data transfer.");
return -EINVAL;
}
}
diff --git a/drivers/media/dvb/frontends/au8522_decoder.c b/drivers/media/dvb/frontends/au8522_decoder.c
index 74981ee923c..7c6431fe33e 100644
--- a/drivers/media/dvb/frontends/au8522_decoder.c
+++ b/drivers/media/dvb/frontends/au8522_decoder.c
@@ -315,7 +315,7 @@ static void setup_decoder_defaults(struct au8522_state *state, u8 input_mode)
if (input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13 ||
input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH24) {
/* Despite what the table says, for the HVR-950q we still need
- to be in CVBS mode for the S-Video input (reason uknown). */
+ to be in CVBS mode for the S-Video input (reason unknown). */
/* filter_coef_type = 3; */
filter_coef_type = 5;
} else {
diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c
index ffbcfabd83f..00a4e8f0330 100644
--- a/drivers/media/dvb/frontends/cx24110.c
+++ b/drivers/media/dvb/frontends/cx24110.c
@@ -1,4 +1,4 @@
- /*
+/*
cx24110 - Single Chip Satellite Channel Receiver driver module
Copyright (C) 2002 Peter Hettkamp <peter.hettkamp@htp-tel.de> based on
@@ -96,7 +96,7 @@ static struct {u8 reg; u8 data;} cx24110_regdata[]=
{0x42,0x00}, /* @ middle bytes " */
{0x43,0x00}, /* @ LSB " */
/* leave the carrier tracking loop parameters on default */
- /* leave the bit timing loop parameters at gefault */
+ /* leave the bit timing loop parameters at default */
{0x56,0x4d}, /* set the filtune voltage to 2.7V, as recommended by */
/* the cx24108 data sheet for symbol rates above 15MS/s */
{0x57,0x00}, /* @ Filter sigma delta enabled, positive */
diff --git a/drivers/media/dvb/frontends/cx24113.c b/drivers/media/dvb/frontends/cx24113.c
index 075b2b57cf0..e9ee55592fd 100644
--- a/drivers/media/dvb/frontends/cx24113.c
+++ b/drivers/media/dvb/frontends/cx24113.c
@@ -589,7 +589,7 @@ struct dvb_frontend *cx24113_attach(struct dvb_frontend *fe,
info("detected CX24113 variant\n");
break;
case REV_CX24113:
- info("sucessfully detected\n");
+ info("successfully detected\n");
break;
default:
err("unsupported device id: %x\n", state->rev);
diff --git a/drivers/media/dvb/frontends/dib3000mb.c b/drivers/media/dvb/frontends/dib3000mb.c
index 136b9d2164d..ad4c8cfd809 100644
--- a/drivers/media/dvb/frontends/dib3000mb.c
+++ b/drivers/media/dvb/frontends/dib3000mb.c
@@ -154,7 +154,7 @@ static int dib3000mb_set_frontend(struct dvb_frontend* fe,
case BANDWIDTH_AUTO:
return -EOPNOTSUPP;
default:
- err("unkown bandwidth value.");
+ err("unknown bandwidth value.");
return -EINVAL;
}
}
diff --git a/drivers/media/dvb/frontends/drx397xD.c b/drivers/media/dvb/frontends/drx397xD.c
index 01007553522..868b78bfae7 100644
--- a/drivers/media/dvb/frontends/drx397xD.c
+++ b/drivers/media/dvb/frontends/drx397xD.c
@@ -81,7 +81,7 @@ static struct {
#include "drx397xD_fw.h"
};
-/* use only with writer lock aquired */
+/* use only with writer lock acquired */
static void _drx_release_fw(struct drx397xD_state *s, enum fw_ix ix)
{
memset(&fw[ix].data[0], 0, sizeof(fw[0].data));
diff --git a/drivers/media/dvb/frontends/lgdt330x.c b/drivers/media/dvb/frontends/lgdt330x.c
index 056387b41a8..43971e63baa 100644
--- a/drivers/media/dvb/frontends/lgdt330x.c
+++ b/drivers/media/dvb/frontends/lgdt330x.c
@@ -479,7 +479,7 @@ static int lgdt3302_read_status(struct dvb_frontend* fe, fe_status_t* status)
switch (state->current_modulation) {
case QAM_256:
case QAM_64:
- /* Need to undestand why there are 3 lock levels here */
+ /* Need to understand why there are 3 lock levels here */
if ((buf[0] & 0x07) == 0x07)
*status |= FE_HAS_CARRIER;
break;
@@ -520,7 +520,7 @@ static int lgdt3303_read_status(struct dvb_frontend* fe, fe_status_t* status)
switch (state->current_modulation) {
case QAM_256:
case QAM_64:
- /* Need to undestand why there are 3 lock levels here */
+ /* Need to understand why there are 3 lock levels here */
if ((buf[0] & 0x07) == 0x07)
*status |= FE_HAS_CARRIER;
else
diff --git a/drivers/media/dvb/frontends/stb0899_drv.c b/drivers/media/dvb/frontends/stb0899_drv.c
index a04c782fff8..1570669837e 100644
--- a/drivers/media/dvb/frontends/stb0899_drv.c
+++ b/drivers/media/dvb/frontends/stb0899_drv.c
@@ -1571,7 +1571,7 @@ static enum dvbfe_search stb0899_search(struct dvb_frontend *fe, struct dvb_fron
* stb0899_track
* periodically check the signal level against a specified
* threshold level and perform derotator centering.
- * called once we have a lock from a succesful search
+ * called once we have a lock from a successful search
* event.
*
* Will be called periodically called to maintain the
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index 8d65c652ba5..baf3159a3aa 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -2425,7 +2425,7 @@ static int __devinit av7110_attach(struct saa7146_dev* dev,
* use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called
*/
saa7146_write(dev, EC1SSR, (0x03<<2) | 3 );
- /* set event counter 1 treshold to maximum allowed value (rEC p55) */
+ /* set event counter 1 threshold to maximum allowed value (rEC p55) */
saa7146_write(dev, ECT1R, 0x3fff );
#endif
/* Set RPS1 Address register to point to RPS code (r108 p42) */
@@ -2559,7 +2559,7 @@ static int __devinit av7110_attach(struct saa7146_dev* dev,
* use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called
*/
saa7146_write(dev, EC1SSR, (0x03<<2) | 3 );
- /* set event counter 1 treshold to maximum allowed value (rEC p55) */
+ /* set event counter 1 threshold to maximum allowed value (rEC p55) */
saa7146_write(dev, ECT1R, 0x3fff );
#endif
/* Setup BUDGETPATCH MAIN RPS1 "program" (p35) */
diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c
index 60136688a9a..9c92f9ddd22 100644
--- a/drivers/media/dvb/ttpci/budget-patch.c
+++ b/drivers/media/dvb/ttpci/budget-patch.c
@@ -456,7 +456,7 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
// use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled
// use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called
saa7146_write(dev, EC1SSR, (0x03<<2) | 3 );
- // set event counter 1 treshold to maximum allowed value (rEC p55)
+ // set event counter 1 threshold to maximum allowed value (rEC p55)
saa7146_write(dev, ECT1R, 0x3fff );
#endif
// Fix VSYNC level
diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c
index a1239083472..5f79acb56e4 100644
--- a/drivers/media/radio/radio-mr800.c
+++ b/drivers/media/radio/radio-mr800.c
@@ -28,7 +28,7 @@
* http://av-usbradio.sourceforge.net/index.php
* http://sourceforge.net/projects/av-usbradio/
* Latest release of theirs project was in 2005.
- * Probably, this driver could be improved trough using their
+ * Probably, this driver could be improved through using their
* achievements (specifications given).
* Also, Faidon Liambotis <paravoid@debian.org> wrote nice driver for this radio
* in 2007. He allowed to use his driver to improve current mr800 radio driver.
diff --git a/drivers/media/video/cx18/cx18-av-core.h b/drivers/media/video/cx18/cx18-av-core.h
index 9b84a0c58e0..cafb7e99b9a 100644
--- a/drivers/media/video/cx18/cx18-av-core.h
+++ b/drivers/media/video/cx18/cx18-av-core.h
@@ -294,7 +294,7 @@ struct cx18_av_state {
#define CXADEC_QAM_CONST_DEC 0x924
#define CXADEC_QAM_ROTATOR_FREQ 0x948
-/* Bit defintions / settings used in Mako Audio */
+/* Bit definitions / settings used in Mako Audio */
#define CXADEC_PREF_MODE_MONO_LANGA 0
#define CXADEC_PREF_MODE_MONO_LANGB 1
#define CXADEC_PREF_MODE_MONO_LANGC 2
diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c
index 6dd51e27582..e12082b8a08 100644
--- a/drivers/media/video/cx18/cx18-driver.c
+++ b/drivers/media/video/cx18/cx18-driver.c
@@ -1200,7 +1200,7 @@ static struct pci_driver cx18_pci_driver = {
.remove = cx18_remove,
};
-static int module_start(void)
+static int __init module_start(void)
{
printk(KERN_INFO "cx18: Start initialization, version %s\n", CX18_VERSION);
@@ -1224,7 +1224,7 @@ static int module_start(void)
return 0;
}
-static void module_cleanup(void)
+static void __exit module_cleanup(void)
{
pci_unregister_driver(&cx18_pci_driver);
}
diff --git a/drivers/media/video/cx18/cx18-mailbox.h b/drivers/media/video/cx18/cx18-mailbox.h
index e23aaac5b28..522ad534034 100644
--- a/drivers/media/video/cx18/cx18-mailbox.h
+++ b/drivers/media/video/cx18/cx18-mailbox.h
@@ -41,7 +41,7 @@ struct cx18;
/*
* This structure is used by CPU to provide completed buffers information
* Its structure is dictrated by the layout of the SCB, required by the
- * firmware, but its defintion needs to be here, instead of in cx18-scb.h,
+ * firmware, but its definition needs to be here, instead of in cx18-scb.h,
* for mailbox work order scheduling
*/
struct cx18_mdl_ack {
diff --git a/drivers/media/video/cx231xx/cx231xx-avcore.c b/drivers/media/video/cx231xx/cx231xx-avcore.c
index 28f48f41f21..c2174413ab2 100644
--- a/drivers/media/video/cx231xx/cx231xx-avcore.c
+++ b/drivers/media/video/cx231xx/cx231xx-avcore.c
@@ -2414,9 +2414,11 @@ int cx231xx_gpio_i2c_read_ack(struct cx231xx *dev)
cx231xx_info("No ACK after %d msec -GPIO I2C failed!",
nInit * 10);
- /* readAck
- throuth clock stretch ,slave has given a SCL signal,
- so the SDA data can be directly read. */
+ /*
+ * readAck
+ * through clock stretch, slave has given a SCL signal,
+ * so the SDA data can be directly read.
+ */
status = cx231xx_get_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
if ((dev->gpio_val & 1 << dev->board.tuner_sda_gpio) == 0) {
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index c31284ba19d..fa2d350e20f 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -1957,7 +1957,7 @@ static struct pci_driver cx23885_pci_driver = {
.resume = NULL,
};
-static int cx23885_init(void)
+static int __init cx23885_init(void)
{
printk(KERN_INFO "cx23885 driver version %d.%d.%d loaded\n",
(CX23885_VERSION_CODE >> 16) & 0xff,
@@ -1970,7 +1970,7 @@ static int cx23885_init(void)
return pci_register_driver(&cx23885_pci_driver);
}
-static void cx23885_fini(void)
+static void __exit cx23885_fini(void)
{
pci_unregister_driver(&cx23885_pci_driver);
}
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 45e13ee66dc..16c6a921f40 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -940,7 +940,7 @@ int cx23885_dvb_register(struct cx23885_tsport *port)
int err, i;
/* Here we need to allocate the correct number of frontends,
- * as reflected in the cards struct. The reality is that currrently
+ * as reflected in the cards struct. The reality is that currently
* no cx23885 boards support this - yet. But, if we don't modify this
* code then the second frontend would never be allocated (later)
* and fail with error before the attach in dvb_register().
diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c
index cf634606ba9..b35411160f0 100644
--- a/drivers/media/video/cx88/cx88-core.c
+++ b/drivers/media/video/cx88/cx88-core.c
@@ -624,7 +624,7 @@ int cx88_reset(struct cx88_core *core)
/* setup image format */
cx_andor(MO_COLOR_CTRL, 0x4000, 0x4000);
- /* setup FIFO Threshholds */
+ /* setup FIFO Thresholds */
cx_write(MO_PDMA_STHRSH, 0x0807);
cx_write(MO_PDMA_DTHRSH, 0x0807);
diff --git a/drivers/media/video/davinci/dm355_ccdc.c b/drivers/media/video/davinci/dm355_ccdc.c
index 4629cabe3f2..31439001637 100644
--- a/drivers/media/video/davinci/dm355_ccdc.c
+++ b/drivers/media/video/davinci/dm355_ccdc.c
@@ -285,7 +285,7 @@ static int validate_ccdc_param(struct ccdc_config_params_raw *ccdcparam)
if ((ccdcparam->med_filt_thres < 0) ||
(ccdcparam->med_filt_thres > CCDC_MED_FILT_THRESH)) {
- dev_dbg(dev, "Invalid value of median filter thresold\n");
+ dev_dbg(dev, "Invalid value of median filter threshold\n");
return -EINVAL;
}
@@ -959,7 +959,7 @@ static struct ccdc_hw_device ccdc_hw_dev = {
},
};
-static int dm355_ccdc_init(void)
+static int __init dm355_ccdc_init(void)
{
printk(KERN_NOTICE "dm355_ccdc_init\n");
if (vpfe_register_ccdc_device(&ccdc_hw_dev) < 0)
@@ -969,7 +969,7 @@ static int dm355_ccdc_init(void)
return 0;
}
-static void dm355_ccdc_exit(void)
+static void __exit dm355_ccdc_exit(void)
{
vpfe_unregister_ccdc_device(&ccdc_hw_dev);
}
diff --git a/drivers/media/video/davinci/dm644x_ccdc.c b/drivers/media/video/davinci/dm644x_ccdc.c
index 2f19a919f47..d5fa193f32d 100644
--- a/drivers/media/video/davinci/dm644x_ccdc.c
+++ b/drivers/media/video/davinci/dm644x_ccdc.c
@@ -859,7 +859,7 @@ static struct ccdc_hw_device ccdc_hw_dev = {
},
};
-static int dm644x_ccdc_init(void)
+static int __init dm644x_ccdc_init(void)
{
printk(KERN_NOTICE "dm644x_ccdc_init\n");
if (vpfe_register_ccdc_device(&ccdc_hw_dev) < 0)
@@ -869,7 +869,7 @@ static int dm644x_ccdc_init(void)
return 0;
}
-static void dm644x_ccdc_exit(void)
+static void __exit dm644x_ccdc_exit(void)
{
vpfe_unregister_ccdc_device(&ccdc_hw_dev);
}
diff --git a/drivers/media/video/davinci/vpss.c b/drivers/media/video/davinci/vpss.c
index 6d709ca8cfb..453236bd755 100644
--- a/drivers/media/video/davinci/vpss.c
+++ b/drivers/media/video/davinci/vpss.c
@@ -53,7 +53,7 @@ struct vpss_hw_ops {
int (*enable_clock)(enum vpss_clock_sel clock_sel, int en);
/* select input to ccdc */
void (*select_ccdc_source)(enum vpss_ccdc_source_sel src_sel);
- /* clear wbl overlflow bit */
+ /* clear wbl overflow bit */
int (*clear_wbl_overflow)(enum vpss_wbl_sel wbl_sel);
};
diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index cf3af8de6e9..e39efb45fa1 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -304,7 +304,7 @@ static const __u8 initOv6650[] = {
};
static const __u8 ov6650_sensor_init[][8] =
{
- /* Bright, contrast, etc are set througth SCBB interface.
+ /* Bright, contrast, etc are set through SCBB interface.
* AVCAP on win2 do not send any data on this controls. */
/* Anyway, some registers appears to alter bright and constrat */
diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c
index fab7ef85a6c..7dbd5eea6cc 100644
--- a/drivers/media/video/gspca/spca500.c
+++ b/drivers/media/video/gspca/spca500.c
@@ -589,7 +589,7 @@ static void spca500_reinit(struct gspca_dev *gspca_dev)
int err;
__u8 Data;
- /* some unknow command from Aiptek pocket dv and family300 */
+ /* some unknown command from Aiptek pocket dv and family300 */
reg_w(gspca_dev, 0x00, 0x0d01, 0x01);
reg_w(gspca_dev, 0x00, 0x0d03, 0x00);
diff --git a/drivers/media/video/gspca/spca501.c b/drivers/media/video/gspca/spca501.c
index b74a34218da..66f9f005614 100644
--- a/drivers/media/video/gspca/spca501.c
+++ b/drivers/media/video/gspca/spca501.c
@@ -1636,7 +1636,7 @@ static const __u16 spca501c_arowana_init_data[][3] = {
{}
};
-/* Unknow camera from Ori Usbid 0x0000:0x0000 */
+/* Unknown camera from Ori Usbid 0x0000:0x0000 */
/* Based on snoops from Ori Cohen */
static const __u16 spca501c_mysterious_open_data[][3] = {
{0x02, 0x000f, 0x0005},
@@ -1945,7 +1945,7 @@ static int sd_init(struct gspca_dev *gspca_dev)
goto error;
break;
case MystFromOriUnknownCamera:
- /* UnKnow Ori CMOS Camera data */
+ /* Unknown Ori CMOS Camera data */
if (write_vector(gspca_dev, spca501c_mysterious_open_data))
goto error;
break;
@@ -1978,7 +1978,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
write_vector(gspca_dev, spca501c_arowana_open_data);
break;
case MystFromOriUnknownCamera:
- /* UnKnow CMOS Camera data */
+ /* Unknown CMOS Camera data */
write_vector(gspca_dev, spca501c_mysterious_init_data);
break;
default:
diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c
index aa8f995ce04..1a9af2ebdbe 100644
--- a/drivers/media/video/gspca/sunplus.c
+++ b/drivers/media/video/gspca/sunplus.c
@@ -631,7 +631,7 @@ static void spca504A_acknowledged_command(struct gspca_dev *gspca_dev,
count = 200;
while (--count > 0) {
msleep(10);
- /* gsmart mini2 write a each wait setting 1 ms is enought */
+ /* gsmart mini2 write a each wait setting 1 ms is enough */
/* reg_w_riv(dev, req, idx, val); */
status = reg_r_12(gspca_dev, 0x01, 0x0001, 1);
if (status == endcode) {
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index cdf3357b4c9..49c3c1226e0 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -7065,7 +7065,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
break;
default:
PDEBUG(D_PROBE,
- "Sensor UNKNOW_0 force Tas5130");
+ "Sensor UNKNOWN_0 force Tas5130");
sd->sensor = SENSOR_TAS5130CXX;
}
break;
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index 463ec3457d7..7cdbc1a8f21 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -1361,7 +1361,7 @@ static struct pci_driver ivtv_pci_driver = {
.remove = ivtv_remove,
};
-static int module_start(void)
+static int __init module_start(void)
{
printk(KERN_INFO "ivtv: Start initialization, version %s\n", IVTV_VERSION);
@@ -1385,7 +1385,7 @@ static int module_start(void)
return 0;
}
-static void module_cleanup(void)
+static void __exit module_cleanup(void)
{
pci_unregister_driver(&ivtv_pci_driver);
}
diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c
index eccb40ab7fe..20522933346 100644
--- a/drivers/media/video/ov772x.c
+++ b/drivers/media/video/ov772x.c
@@ -247,7 +247,7 @@
/* COM5 */
#define AFR_ON_OFF 0x80 /* Auto frame rate control ON/OFF selection */
-#define AFR_SPPED 0x40 /* Auto frame rate control speed slection */
+#define AFR_SPPED 0x40 /* Auto frame rate control speed selection */
/* Auto frame rate max rate control */
#define AFR_NO_RATE 0x00 /* No reduction of frame rate */
#define AFR_1p2 0x10 /* Max reduction to 1/2 frame rate */
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
index 5b152ff20bd..5fcad28211d 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
@@ -332,7 +332,7 @@ struct pvr2_hdw {
/* Bit mask of PVR2_CVAL_INPUT choices which are valid for the hardware */
unsigned int input_avail_mask;
- /* Bit mask of PVR2_CVAL_INPUT choices which are currenly allowed */
+ /* Bit mask of PVR2_CVAL_INPUT choices which are currently allowed */
unsigned int input_allowed_mask;
/* Location of eeprom or a negative number if none */
diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c
index 2c0bb06cab3..03d39266d29 100644
--- a/drivers/media/video/s2255drv.c
+++ b/drivers/media/video/s2255drv.c
@@ -1980,7 +1980,7 @@ static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info)
wake_up(&dev->fw_data->wait_fw);
break;
default:
- printk(KERN_INFO "s2255 unknwn resp\n");
+ printk(KERN_INFO "s2255 unknown resp\n");
}
default:
pdata++;
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index f87757fccc7..c673901cb2b 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -1319,7 +1319,7 @@ static struct pci_driver saa7134_pci_driver = {
#endif
};
-static int saa7134_init(void)
+static int __init saa7134_init(void)
{
INIT_LIST_HEAD(&saa7134_devlist);
printk(KERN_INFO "saa7130/34: v4l2 driver version %d.%d.%d loaded\n",
@@ -1333,7 +1333,7 @@ static int saa7134_init(void)
return pci_register_driver(&saa7134_pci_driver);
}
-static void saa7134_fini(void)
+static void __exit saa7134_fini(void)
{
pci_unregister_driver(&saa7134_pci_driver);
}
diff --git a/drivers/media/video/saa7164/saa7164-core.c b/drivers/media/video/saa7164/saa7164-core.c
index 709affc3104..e6aa0fbd1e9 100644
--- a/drivers/media/video/saa7164/saa7164-core.c
+++ b/drivers/media/video/saa7164/saa7164-core.c
@@ -724,13 +724,13 @@ static struct pci_driver saa7164_pci_driver = {
.resume = NULL,
};
-static int saa7164_init(void)
+static int __init saa7164_init(void)
{
printk(KERN_INFO "saa7164 driver loaded\n");
return pci_register_driver(&saa7164_pci_driver);
}
-static void saa7164_fini(void)
+static void __exit saa7164_fini(void)
{
pci_unregister_driver(&saa7164_pci_driver);
}
diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h
index d439c76b27e..cb1de7ea197 100644
--- a/drivers/media/video/zoran/zoran.h
+++ b/drivers/media/video/zoran/zoran.h
@@ -106,7 +106,7 @@ struct zoran_params {
unsigned long jpeg_markers; /* Which markers should go into the JPEG output.
* Unless you exactly know what you do, leave them untouched.
* Inluding less markers will make the resulting code
- * smaller, but there will be fewer aplications
+ * smaller, but there will be fewer applications
* which can read it.
* The presence of the APP and COM marker is
* influenced by APP0_len and COM_len ONLY! */
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index d505b68cd37..e39986a7827 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -940,7 +940,7 @@ static const struct block_device_operations i2o_block_fops = {
* Allocate memory for the i2o_block_device struct, gendisk and request
* queue and initialize them as far as no additional information is needed.
*
- * Returns a pointer to the allocated I2O Block device on succes or a
+ * Returns a pointer to the allocated I2O Block device on success or a
* negative error code on failure.
*/
static struct i2o_block_device *i2o_block_device_alloc(void)
diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c
index 27cf4af0e13..e5ab6214150 100644
--- a/drivers/message/i2o/iop.c
+++ b/drivers/message/i2o/iop.c
@@ -132,7 +132,7 @@ u32 i2o_cntxt_list_add(struct i2o_controller * c, void *ptr)
* Removes a previously added pointer from the context list and returns
* the matching context id.
*
- * Returns context id on succes or 0 on failure.
+ * Returns context id on success or 0 on failure.
*/
u32 i2o_cntxt_list_remove(struct i2o_controller * c, void *ptr)
{
@@ -198,7 +198,7 @@ void *i2o_cntxt_list_get(struct i2o_controller *c, u32 context)
* @c: controller to which the context list belong
* @ptr: pointer to which the context id should be fetched
*
- * Returns context id which matches to the pointer on succes or 0 on
+ * Returns context id which matches to the pointer on success or 0 on
* failure.
*/
u32 i2o_cntxt_list_get_ptr(struct i2o_controller * c, void *ptr)
diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c
index 41c8fe2a928..ce5eda985ab 100644
--- a/drivers/misc/sgi-gru/grufile.c
+++ b/drivers/misc/sgi-gru/grufile.c
@@ -92,7 +92,7 @@ static void gru_vma_close(struct vm_area_struct *vma)
/*
* gru_file_mmap
*
- * Called when mmaping the device. Initializes the vma with a fault handler
+ * Called when mmapping the device. Initializes the vma with a fault handler
* and private data structure necessary to allocate, track, and free the
* underlying pages.
*/
diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c
index 36a8d53ad2a..b8e7c5ae981 100644
--- a/drivers/mmc/card/sdio_uart.c
+++ b/drivers/mmc/card/sdio_uart.c
@@ -231,7 +231,8 @@ static unsigned int sdio_uart_get_mctrl(struct sdio_uart_port *port)
return ret;
}
-static void sdio_uart_write_mctrl(struct sdio_uart_port *port, unsigned int mctrl)
+static void sdio_uart_write_mctrl(struct sdio_uart_port *port,
+ unsigned int mctrl)
{
unsigned char mcr = 0;
@@ -387,7 +388,8 @@ static void sdio_uart_stop_rx(struct sdio_uart_port *port)
sdio_out(port, UART_IER, port->ier);
}
-static void sdio_uart_receive_chars(struct sdio_uart_port *port, unsigned int *status)
+static void sdio_uart_receive_chars(struct sdio_uart_port *port,
+ unsigned int *status)
{
struct tty_struct *tty = port->tty;
unsigned int ch, flag;
@@ -399,7 +401,7 @@ static void sdio_uart_receive_chars(struct sdio_uart_port *port, unsigned int *s
port->icount.rx++;
if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
- UART_LSR_FE | UART_LSR_OE))) {
+ UART_LSR_FE | UART_LSR_OE))) {
/*
* For statistics only
*/
@@ -417,9 +419,9 @@ static void sdio_uart_receive_chars(struct sdio_uart_port *port, unsigned int *s
* Mask off conditions which should be ignored.
*/
*status &= port->read_status_mask;
- if (*status & UART_LSR_BI) {
+ if (*status & UART_LSR_BI)
flag = TTY_BREAK;
- } else if (*status & UART_LSR_PE)
+ else if (*status & UART_LSR_PE)
flag = TTY_PARITY;
else if (*status & UART_LSR_FE)
flag = TTY_FRAME;
@@ -574,7 +576,7 @@ static int sdio_uart_startup(struct sdio_uart_port *port)
*/
sdio_out(port, UART_FCR, UART_FCR_ENABLE_FIFO);
sdio_out(port, UART_FCR, UART_FCR_ENABLE_FIFO |
- UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
sdio_out(port, UART_FCR, 0);
/*
@@ -635,7 +637,7 @@ static void sdio_uart_shutdown(struct sdio_uart_port *port)
if (port->tty->termios->c_cflag & HUPCL)
sdio_uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
- /* Disable interrupts from this port */
+ /* Disable interrupts from this port */
sdio_release_irq(port->func);
port->ier = 0;
sdio_out(port, UART_IER, 0);
@@ -659,7 +661,7 @@ skip:
free_page((unsigned long)port->xmit.buf);
}
-static int sdio_uart_open (struct tty_struct *tty, struct file * filp)
+static int sdio_uart_open(struct tty_struct *tty, struct file *filp)
{
struct sdio_uart_port *port;
int ret;
@@ -846,7 +848,7 @@ static void sdio_uart_set_termios(struct tty_struct *tty, struct ktermios *old_t
struct sdio_uart_port *port = tty->driver_data;
unsigned int cflag = tty->termios->c_cflag;
-#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
if ((cflag ^ old_termios->c_cflag) == 0 &&
RELEVANT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0)
@@ -925,7 +927,7 @@ static int sdio_uart_tiocmset(struct tty_struct *tty, struct file *file,
struct sdio_uart_port *port = tty->driver_data;
int result;
- result =sdio_uart_claim_func(port);
+ result = sdio_uart_claim_func(port);
if(!result) {
sdio_uart_update_mctrl(port, set, clear);
sdio_uart_release_func(port);
@@ -946,31 +948,31 @@ static int sdio_uart_proc_show(struct seq_file *m, void *v)
seq_printf(m, "%d: uart:SDIO", i);
if(capable(CAP_SYS_ADMIN)) {
seq_printf(m, " tx:%d rx:%d",
- port->icount.tx, port->icount.rx);
+ port->icount.tx, port->icount.rx);
if (port->icount.frame)
seq_printf(m, " fe:%d",
- port->icount.frame);
+ port->icount.frame);
if (port->icount.parity)
seq_printf(m, " pe:%d",
- port->icount.parity);
+ port->icount.parity);
if (port->icount.brk)
seq_printf(m, " brk:%d",
- port->icount.brk);
+ port->icount.brk);
if (port->icount.overrun)
seq_printf(m, " oe:%d",
- port->icount.overrun);
+ port->icount.overrun);
if (port->icount.cts)
seq_printf(m, " cts:%d",
- port->icount.cts);
+ port->icount.cts);
if (port->icount.dsr)
seq_printf(m, " dsr:%d",
- port->icount.dsr);
+ port->icount.dsr);
if (port->icount.rng)
seq_printf(m, " rng:%d",
- port->icount.rng);
+ port->icount.rng);
if (port->icount.dcd)
seq_printf(m, " dcd:%d",
- port->icount.dcd);
+ port->icount.dcd);
}
sdio_uart_port_put(port);
seq_putc(m, '\n');
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 99b74a35102..941a4d35ef8 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -1360,7 +1360,7 @@ static struct mmc_host_ops s3cmci_ops = {
static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
/* This is currently here to avoid a number of if (host->pdata)
- * checks. Any zero fields to ensure reaonable defaults are picked. */
+ * checks. Any zero fields to ensure reasonable defaults are picked. */
};
#ifdef CONFIG_CPU_FREQ
diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
index 9408099eec4..35c6a23b183 100644
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -1,5 +1,3 @@
-# drivers/mtd/chips/Kconfig
-
menu "RAM/ROM/Flash chip drivers"
depends on MTD!=n
@@ -242,4 +240,3 @@ config MTD_XIP
then say N.
endmenu
-
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index c222514bb70..35081ce77fb 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -1,5 +1,3 @@
-# drivers/mtd/maps/Kconfig
-
menu "Self-contained MTD device drivers"
depends on MTD!=n
@@ -308,4 +306,3 @@ config MTD_DOCPROBE_55AA
you have managed to wipe the first block.
endmenu
-
diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c
index 3aa05cd18ea..592016a0668 100644
--- a/drivers/mtd/devices/slram.c
+++ b/drivers/mtd/devices/slram.c
@@ -18,7 +18,7 @@
to specify the offset instead of the absolute address
NOTE:
- With slram it's only possible to map a contigous memory region. Therfore
+ With slram it's only possible to map a contiguous memory region. Therefore
if there's a device mapped somewhere in the region specified slram will
fail to load (see kernel log if modprobe fails).
diff --git a/drivers/mtd/lpddr/Kconfig b/drivers/mtd/lpddr/Kconfig
index 5a401d8047a..265f969817e 100644
--- a/drivers/mtd/lpddr/Kconfig
+++ b/drivers/mtd/lpddr/Kconfig
@@ -1,5 +1,3 @@
-# drivers/mtd/chips/Kconfig
-
menu "LPDDR flash memory drivers"
depends on MTD!=n
@@ -20,4 +18,3 @@ config MTD_QINFO_PROBE
families of devices. This serves similar purpose of CFI on legacy
Flash products
endmenu
-
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 14be0755d7c..847e214ade5 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -1,5 +1,3 @@
-# drivers/mtd/maps/Kconfig
-
menu "Mapping drivers for chip access"
depends on MTD!=n
@@ -389,9 +387,9 @@ config MTD_IXP2000
depends on MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP2000
help
This enables MTD access to flash devices on platforms based
- on Intel's IXP2000 family of network processors such as the
- IXDP425 and Coyote. If you have an IXP2000 based board and
- would like to use the flash chips on it, say 'Y'.
+ on Intel's IXP2000 family of network processors. If you have an
+ IXP2000 based board and would like to use the flash chips on it,
+ say 'Y'.
config MTD_FORTUNET
tristate "CFI Flash device mapped on the FortuNet board"
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 8f8e87b7ed6..0e35e1aefd2 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -1,5 +1,3 @@
-# drivers/mtd/nand/Kconfig
-
menuconfig MTD_NAND
tristate "NAND Device Support"
depends on MTD
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index e51c1ed7ac1..b126cf88747 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -1056,7 +1056,7 @@ static struct nand_ecclayout doc200x_oobinfo = {
};
/* Find the (I)NFTL Media Header, and optionally also the mirror media header.
- On sucessful return, buf will contain a copy of the media header for
+ On successful return, buf will contain a copy of the media header for
further processing. id is the string to scan for, and will presumably be
either "ANAND" or "BNAND". If findmirror=1, also look for the mirror media
header. The page #s of the found media headers are placed in mh0_page and
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index db7ae9d6a29..92320a64327 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -475,7 +475,7 @@ int __nand_correct_data(unsigned char *buf,
*
* The b2 shift is there to get rid of the lowest two bits.
* We could also do addressbits[b2] >> 1 but for the
- * performace it does not make any difference
+ * performance it does not make any difference
*/
if (eccsize_mult == 1)
byte_addr = (addressbits[b1] << 4) + addressbits[b0];
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 11dc7e69c4f..68b5b3a486a 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -875,7 +875,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
* @info: The controller instance.
* @nmtd: The driver version of the MTD instance.
*
- * This routine is called after the chip probe has succesfully completed
+ * This routine is called after the chip probe has successfully completed
* and the relevant per-chip information updated. This call ensure that
* we update the internal state accordingly.
*
diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig
index a38f580c2bb..3a9f1578460 100644
--- a/drivers/mtd/onenand/Kconfig
+++ b/drivers/mtd/onenand/Kconfig
@@ -1,7 +1,3 @@
-#
-# linux/drivers/mtd/onenand/Kconfig
-#
-
menuconfig MTD_ONENAND
tristate "OneNAND Device Support"
depends on MTD
diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig
index b1cd7a1a219..0a8c7ea764a 100644
--- a/drivers/mtd/ubi/Kconfig
+++ b/drivers/mtd/ubi/Kconfig
@@ -1,5 +1,3 @@
-# drivers/mtd/ubi/Kconfig
-
menu "UBI - Unsorted block images"
depends on MTD
diff --git a/drivers/net/82596.c b/drivers/net/82596.c
index ea6b139b812..1663bc9e45d 100644
--- a/drivers/net/82596.c
+++ b/drivers/net/82596.c
@@ -19,7 +19,7 @@
TBD:
* look at deferring rx frames rather than discarding (as per tulip)
* handle tx ring full as per tulip
- * performace test to tune rx_copybreak
+ * performance test to tune rx_copybreak
Most of my modifications relate to the braindead big-endian
implementation by Intel. When the i596 is operating in
diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c
index 4e6359fff0e..766aabfdfc7 100644
--- a/drivers/net/amd8111e.c
+++ b/drivers/net/amd8111e.c
@@ -1633,8 +1633,13 @@ static int amd8111e_enable_link_change(struct amd8111e_priv* lp)
readl(lp->mmio + CMD7);
return 0;
}
-/* This function is called when a packet transmission fails to complete within a resonable period, on the assumption that an interrupts have been failed or the interface is locked up. This function will reinitialize the hardware */
+/*
+ * This function is called when a packet transmission fails to complete
+ * within a reasonable period, on the assumption that an interrupt have
+ * failed or the interface is locked up. This function will reinitialize
+ * the hardware.
+ */
static void amd8111e_tx_timeout(struct net_device *dev)
{
struct amd8111e_priv* lp = netdev_priv(dev);
diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c
index 50cecf41747..73b38c204eb 100644
--- a/drivers/net/appletalk/cops.c
+++ b/drivers/net/appletalk/cops.c
@@ -120,7 +120,7 @@ static int irq = 5; /* Default IRQ */
* DAYNA driver mode:
* Dayna DL2000/DaynaTalk PC (Half Length), COPS LT-95,
* Farallon PhoneNET PC III, Farallon PhoneNET PC II
- * Other cards possibly supported mode unkown though:
+ * Other cards possibly supported mode unknown though:
* Dayna DL2000 (Full length), COPS LT/M (Micro-Channel)
*
* Cards NOT supported by this driver but supported by the ltpc.c
diff --git a/drivers/net/ariadne.h b/drivers/net/ariadne.h
index bb613f292e0..727be5cdd1e 100644
--- a/drivers/net/ariadne.h
+++ b/drivers/net/ariadne.h
@@ -244,7 +244,7 @@ struct Am79C960 {
#define DLNKTST 0x0010 /* Disable Link Status */
#define DAPC 0x0008 /* Disable Automatic Polarity Correction */
#define MENDECL 0x0004 /* MENDEC Loopback Mode */
-#define LRTTSEL 0x0002 /* Low Receive Treshold/Transmit Mode Select */
+#define LRTTSEL 0x0002 /* Low Receive Threshold/Transmit Mode Select */
#define PORTSEL1 0x0001 /* Port Select Bits */
#define PORTSEL2 0x8000 /* Port Select Bits */
#define INTL 0x4000 /* Internal Loopback */
diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c
index 1e2f57d4c36..6eb9241cee0 100644
--- a/drivers/net/atl1c/atl1c_main.c
+++ b/drivers/net/atl1c/atl1c_main.c
@@ -1540,7 +1540,7 @@ static irqreturn_t atl1c_intr(int irq, void *data)
if (status & ISR_OVER)
if (netif_msg_intr(adapter))
dev_warn(&pdev->dev,
- "TX/RX over flow (status = 0x%x)\n",
+ "TX/RX overflow (status = 0x%x)\n",
status & ISR_OVER);
/* link event */
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h
index e7323be507d..92b87ef156e 100644
--- a/drivers/net/benet/be_cmds.h
+++ b/drivers/net/benet/be_cmds.h
@@ -444,7 +444,7 @@ enum be_if_flags {
* filtering capabilities. */
struct be_cmd_req_if_create {
struct be_cmd_req_hdr hdr;
- u32 version; /* ignore currntly */
+ u32 version; /* ignore currently */
u32 capability_flags;
u32 enable_flags;
u8 mac_addr[ETH_ALEN];
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 957a0f7f276..24c7d9900ba 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -1982,7 +1982,7 @@ int be_load_fw(struct be_adapter *adapter, u8 *func)
goto fw_exit;
}
- dev_info(&adapter->pdev->dev, "Firmware flashed succesfully\n");
+ dev_info(&adapter->pdev->dev, "Firmware flashed successfully\n");
fw_exit:
release_firmware(fw);
diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h
index b668173ffcb..944964e78c8 100644
--- a/drivers/net/bnx2x_reg.h
+++ b/drivers/net/bnx2x_reg.h
@@ -2536,7 +2536,7 @@
/* [RC 1] A flag to indicate that overflow error occurred in one of the
queues. */
#define QM_REG_OVFERROR 0x16805c
-/* [RC 7] the Q were the qverflow occurs */
+/* [RC 7] the Q where the overflow occurs */
#define QM_REG_OVFQNUM 0x168058
/* [R 16] Pause state for physical queues 15-0 */
#define QM_REG_PAUSESTATE0 0x168410
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 0d30d1e5e53..00ab51ef312 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -556,7 +556,7 @@ static void rlb_update_rx_clients(struct bonding *bond)
}
}
- /* do not update the entries again untill this counter is zero so that
+ /* do not update the entries again until this counter is zero so that
* not to confuse the clients.
*/
bond_info->rlb_update_delay_counter = RLB_UPDATE_DELAY;
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index 49f3de79118..bdbd14727e4 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -1285,7 +1285,7 @@ netdev_tx_t t3_eth_xmit(struct sk_buff *skb, struct net_device *dev)
/*
* We do not use Tx completion interrupts to free DMAd Tx packets.
- * This is good for performamce but means that we rely on new Tx
+ * This is good for performance but means that we rely on new Tx
* packets arriving to run the destructors of completed packets,
* which open up space in their sockets' send queues. Sometimes
* we do not get such new packets causing Tx to stall. A single
diff --git a/drivers/net/ehea/ehea_ethtool.c b/drivers/net/ehea/ehea_ethtool.c
index d7688522336..75b099ce49c 100644
--- a/drivers/net/ehea/ehea_ethtool.c
+++ b/drivers/net/ehea/ehea_ethtool.c
@@ -118,7 +118,7 @@ doit:
ret = ehea_set_portspeed(port, sp);
if (!ret)
- ehea_info("%s: Port speed succesfully set: %dMbps "
+ ehea_info("%s: Port speed successfully set: %dMbps "
"%s Duplex",
port->netdev->name, port->port_speed,
port->full_duplex == 1 ? "Full" : "Half");
@@ -134,7 +134,7 @@ static int ehea_nway_reset(struct net_device *dev)
ret = ehea_set_portspeed(port, EHEA_SPEED_AUTONEG);
if (!ret)
- ehea_info("%s: Port speed succesfully set: %dMbps "
+ ehea_info("%s: Port speed successfully set: %dMbps "
"%s Duplex",
port->netdev->name, port->port_speed,
port->full_duplex == 1 ? "Full" : "Half");
diff --git a/drivers/net/hamradio/baycom_ser_fdx.c b/drivers/net/hamradio/baycom_ser_fdx.c
index ed60fd66427..0cab992b3d1 100644
--- a/drivers/net/hamradio/baycom_ser_fdx.c
+++ b/drivers/net/hamradio/baycom_ser_fdx.c
@@ -35,7 +35,7 @@
* driver only supports standard serial hardware (8250, 16450, 16550A)
*
* This modem usually draws its supply current out of the otherwise unused
- * TXD pin of the serial port. Thus a contignuous stream of 0x00-bytes
+ * TXD pin of the serial port. Thus a contiguous stream of 0x00-bytes
* is transmitted to achieve a positive supply voltage.
*
* hsk: This is a 4800 baud FSK modem, designed for TNC use. It works fine
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index 1e8dd8c74a6..8f7d0d146f2 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -115,7 +115,7 @@ struct smsc_ircc_subsystem_configuration {
unsigned short vendor; /* PCI vendor ID */
unsigned short device; /* PCI vendor ID */
unsigned short subvendor; /* PCI subsystem vendor ID */
- unsigned short subdevice; /* PCI sybsystem device ID */
+ unsigned short subdevice; /* PCI subsystem device ID */
unsigned short sir_io; /* I/O port for SIR */
unsigned short fir_io; /* I/O port for FIR */
unsigned char fir_irq; /* FIR IRQ */
diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c
index 49997194bdd..16c91910d6c 100644
--- a/drivers/net/iseries_veth.c
+++ b/drivers/net/iseries_veth.c
@@ -1384,7 +1384,7 @@ static inline void veth_build_dma_list(struct dma_chunk *list,
unsigned long done;
int i = 1;
- /* FIXME: skbs are continguous in real addresses. Do we
+ /* FIXME: skbs are contiguous in real addresses. Do we
* really need to break it into PAGE_SIZE chunks, or can we do
* it just at the granularity of iSeries real->absolute
* mapping? Indeed, given the way the allocator works, can we
diff --git a/drivers/net/lasi_82596.c b/drivers/net/lasi_82596.c
index a0c578585a5..b77238dbafb 100644
--- a/drivers/net/lasi_82596.c
+++ b/drivers/net/lasi_82596.c
@@ -47,7 +47,7 @@
TBD:
* look at deferring rx frames rather than discarding (as per tulip)
* handle tx ring full as per tulip
- * performace test to tune rx_copybreak
+ * performance test to tune rx_copybreak
Most of my modifications relate to the braindead big-endian
implementation by Intel. When the i596 is operating in
diff --git a/drivers/net/lib82596.c b/drivers/net/lib82596.c
index 7a07430206e..b117f7f8b19 100644
--- a/drivers/net/lib82596.c
+++ b/drivers/net/lib82596.c
@@ -47,7 +47,7 @@
TBD:
* look at deferring rx frames rather than discarding (as per tulip)
* handle tx ring full as per tulip
- * performace test to tune rx_copybreak
+ * performance test to tune rx_copybreak
Most of my modifications relate to the braindead big-endian
implementation by Intel. When the i596 is operating in
diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c
index 03b781a7a18..829b9ec9ff6 100644
--- a/drivers/net/mlx4/en_rx.c
+++ b/drivers/net/mlx4/en_rx.c
@@ -204,7 +204,7 @@ static void mlx4_en_free_rx_desc(struct mlx4_en_priv *priv,
en_dbg(DRV, priv, "Freeing fragment:%d\n", nr);
dma = be64_to_cpu(rx_desc->data[nr].addr);
- en_dbg(DRV, priv, "Unmaping buffer at dma:0x%llx\n", (u64) dma);
+ en_dbg(DRV, priv, "Unmapping buffer at dma:0x%llx\n", (u64) dma);
pci_unmap_single(mdev->pdev, dma, skb_frags[nr].size,
PCI_DMA_FROMDEVICE);
put_page(skb_frags[nr].page);
diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c
index 8c7279965b4..3d1396af946 100644
--- a/drivers/net/mlx4/en_tx.c
+++ b/drivers/net/mlx4/en_tx.c
@@ -47,7 +47,7 @@ enum {
static int inline_thold __read_mostly = MAX_INLINE;
module_param_named(inline_thold, inline_thold, int, 0444);
-MODULE_PARM_DESC(inline_thold, "treshold for using inline data");
+MODULE_PARM_DESC(inline_thold, "threshold for using inline data");
int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv,
struct mlx4_en_tx_ring *ring, u32 size,
diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h
index 4376147b0ea..82c3ebc584e 100644
--- a/drivers/net/mlx4/mlx4_en.h
+++ b/drivers/net/mlx4/mlx4_en.h
@@ -162,7 +162,7 @@ enum {
#define MLX4_EN_DEF_RX_PAUSE 1
#define MLX4_EN_DEF_TX_PAUSE 1
-/* Interval between sucessive polls in the Tx routine when polling is used
+/* Interval between successive polls in the Tx routine when polling is used
instead of interrupts (in per-core Tx rings) - should be power of 2 */
#define MLX4_EN_TX_POLL_MODER 16
#define MLX4_EN_TX_POLL_TIMEOUT (HZ / 4)
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
index 89c4948300a..0c768593aad 100644
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -314,7 +314,7 @@ static void gelic_card_reset_chain(struct gelic_card *card,
* @card: card structure
* @descr: descriptor to re-init
*
- * return 0 on succes, <0 on failure
+ * return 0 on success, <0 on failure
*
* allocates a new rx skb, iommu-maps it and attaches it to the descriptor.
* Activate the descriptor state-wise
diff --git a/drivers/net/ps3_gelic_wireless.h b/drivers/net/ps3_gelic_wireless.h
index 5b631c6c977..0a88b535197 100644
--- a/drivers/net/ps3_gelic_wireless.h
+++ b/drivers/net/ps3_gelic_wireless.h
@@ -199,7 +199,7 @@ struct gelic_eurus_rssi_info {
/* for 'stat' member of gelic_wl_info */
enum gelic_wl_info_status_bit {
GELIC_WL_STAT_CONFIGURED,
- GELIC_WL_STAT_CH_INFO, /* ch info aquired */
+ GELIC_WL_STAT_CH_INFO, /* ch info acquired */
GELIC_WL_STAT_ESSID_SET, /* ESSID specified by userspace */
GELIC_WL_STAT_BSSID_SET, /* BSSID specified by userspace */
GELIC_WL_STAT_WPA_PSK_SET, /* PMK specified by userspace */
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index e3e6bc917c8..dd35066a7f8 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -3651,7 +3651,7 @@ static int ql_adapter_up(struct ql3_adapter *qdev)
ql_sem_unlock(qdev, QL_DRVR_SEM_MASK);
} else {
printk(KERN_ERR PFX
- "%s: Could not aquire driver lock.\n",
+ "%s: Could not acquire driver lock.\n",
ndev->name);
goto err_lock;
}
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 0dd7839322b..cc4218667cb 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -3238,7 +3238,7 @@ static u64 s2io_mdio_read(u32 mmd_type, u64 addr, struct net_device *dev)
/**
* s2io_chk_xpak_counter - Function to check the status of the xpak counters
- * @counter : couter value to be updated
+ * @counter : counter value to be updated
* @flag : flag to indicate the status
* @type : counter type
* Description:
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 9a12d88ac2d..7360d4bbf75 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -1760,7 +1760,7 @@ static int sis900_rx(struct net_device *net_dev)
sis_priv->rx_ring[entry].bufptr, RX_BUF_SIZE,
PCI_DMA_FROMDEVICE);
- /* refill the Rx buffer, what if there is not enought
+ /* refill the Rx buffer, what if there is not enough
* memory for new socket buffer ?? */
if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
/*
@@ -1775,7 +1775,7 @@ static int sis900_rx(struct net_device *net_dev)
}
/* This situation should never happen, but due to
- some unknow bugs, it is possible that
+ some unknown bugs, it is possible that
we are working on NULL sk_buff :-( */
if (sis_priv->rx_skbuff[entry] == NULL) {
if (netif_msg_rx_err(sis_priv))
diff --git a/drivers/net/skfp/h/smc.h b/drivers/net/skfp/h/smc.h
index 1758d954836..026a83b9f74 100644
--- a/drivers/net/skfp/h/smc.h
+++ b/drivers/net/skfp/h/smc.h
@@ -393,10 +393,10 @@ struct smt_config {
*/
u_long mac_d_max ; /* MAC : D_Max timer value */
- u_long lct_short ; /* LCT : error threshhold */
- u_long lct_medium ; /* LCT : error threshhold */
- u_long lct_long ; /* LCT : error threshhold */
- u_long lct_extended ; /* LCT : error threshhold */
+ u_long lct_short ; /* LCT : error threshold */
+ u_long lct_medium ; /* LCT : error threshold */
+ u_long lct_long ; /* LCT : error threshold */
+ u_long lct_extended ; /* LCT : error threshold */
} ;
#ifdef DEBUG
diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c
index b27156eaf26..db216a72850 100644
--- a/drivers/net/skfp/skfddi.c
+++ b/drivers/net/skfp/skfddi.c
@@ -1002,7 +1002,7 @@ static int skfp_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
}
break;
default:
- printk("ioctl for %s: unknow cmd: %04x\n", dev->name, ioc.cmd);
+ printk("ioctl for %s: unknown cmd: %04x\n", dev->name, ioc.cmd);
status = -EOPNOTSUPP;
} // switch
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 3943d89afb2..044e6817986 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -2017,7 +2017,7 @@ static void sky2_link_down(struct sky2_port *sky2)
netif_carrier_off(sky2->netdev);
- /* Turn on link LED */
+ /* Turn off link LED */
sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
if (netif_msg_link(sky2))
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index 4d0d5c56bed..20d6095cf41 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -816,7 +816,7 @@ static int smsc911x_mii_probe(struct net_device *dev)
SMSC_TRACE(HW, "Passed Loop Back Test");
#endif /* USE_PHY_WORK_AROUND */
- SMSC_TRACE(HW, "phy initialised succesfully");
+ SMSC_TRACE(HW, "phy initialised successfully");
return 0;
}
diff --git a/drivers/net/smsc911x.h b/drivers/net/smsc911x.h
index b5716bd8a59..016360c65ce 100644
--- a/drivers/net/smsc911x.h
+++ b/drivers/net/smsc911x.h
@@ -30,7 +30,7 @@
#define SMSC_NAPI_WEIGHT 16
/* implements a PHY loopback test at initialisation time, to ensure a packet
- * can be succesfully looped back */
+ * can be successfully looped back */
#define USE_PHY_WORK_AROUND
#define DPRINTK(nlevel, klevel, fmt, args...) \
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index 782910cf220..218524857bf 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -410,7 +410,7 @@ spider_net_free_rx_chain_contents(struct spider_net_card *card)
* @card: card structure
* @descr: descriptor to re-init
*
- * Return 0 on succes, <0 on failure.
+ * Return 0 on success, <0 on failure.
*
* Allocates a new rx skb, iommu-maps it and attaches it to the
* descriptor. Mark the descriptor as activated, ready-to-use.
diff --git a/drivers/net/stmmac/gmac.c b/drivers/net/stmmac/gmac.c
index b624bb5bae0..52586ee6895 100644
--- a/drivers/net/stmmac/gmac.c
+++ b/drivers/net/stmmac/gmac.c
@@ -112,7 +112,7 @@ static void gmac_dma_operation_mode(unsigned long ioaddr, int txmode,
" (threshold = %d)\n", txmode);
csr6 &= ~DMA_CONTROL_TSF;
csr6 &= DMA_CONTROL_TC_TX_MASK;
- /* Set the transmit threashold */
+ /* Set the transmit threshold */
if (txmode <= 32)
csr6 |= DMA_CONTROL_TTC_32;
else if (txmode <= 64)
diff --git a/drivers/net/stmmac/gmac.h b/drivers/net/stmmac/gmac.h
index 684a363120a..2e82d6c9a14 100644
--- a/drivers/net/stmmac/gmac.h
+++ b/drivers/net/stmmac/gmac.h
@@ -154,14 +154,14 @@ enum rx_tx_priority_ratio {
#define DMA_CONTROL_DT 0x04000000 /* Disable Drop TCP/IP csum error */
#define DMA_CONTROL_RSF 0x02000000 /* Receive Store and Forward */
#define DMA_CONTROL_DFF 0x01000000 /* Disaable flushing */
-/* Theshold for Activating the FC */
+/* Threshold for Activating the FC */
enum rfa {
act_full_minus_1 = 0x00800000,
act_full_minus_2 = 0x00800200,
act_full_minus_3 = 0x00800400,
act_full_minus_4 = 0x00800600,
};
-/* Theshold for Deactivating the FC */
+/* Threshold for Deactivating the FC */
enum rfd {
deac_full_minus_1 = 0x00400000,
deac_full_minus_2 = 0x00400800,
diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c
index 5db0270957a..66272f2a075 100644
--- a/drivers/net/tokenring/ibmtr.c
+++ b/drivers/net/tokenring/ibmtr.c
@@ -96,7 +96,7 @@
*
* Change by Mike Sullivan et al.:
* + added turbo card support. No need to use lanaid to configure
- * the adapter into isa compatiblity mode.
+ * the adapter into isa compatibility mode.
*
* Changes by Burt Silverman to allow the computer to behave nicely when
* a cable is pulled or not in place, or a PCMCIA card is removed hot.
diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c
index 427a8970b6f..5401d86a7be 100644
--- a/drivers/net/tokenring/smctr.c
+++ b/drivers/net/tokenring/smctr.c
@@ -426,7 +426,7 @@ static int smctr_alloc_shared_memory(struct net_device *dev)
smctr_malloc(dev, 1L);
/* Allocate Non-MAC receive data buffers.
- * To guarantee a minimum of 256 contigous memory to
+ * To guarantee a minimum of 256 contiguous memory to
* UM_Receive_Packet's lookahead pointer, before a page
* change or ring end is encountered, place each rx buffer on
* a 256 byte boundary.
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 9f44c99777a..afaf088b72e 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -3798,7 +3798,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
prop = of_get_property(np, "tx-clock", NULL);
if (!prop) {
printk(KERN_ERR
- "ucc_geth: mising tx-clock-name property\n");
+ "ucc_geth: missing tx-clock-name property\n");
return -EINVAL;
}
if ((*prop < QE_CLK_NONE) || (*prop > QE_CLK24)) {
diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h
index 03a6ca016d5..a007e2acf65 100644
--- a/drivers/net/ucc_geth.h
+++ b/drivers/net/ucc_geth.h
@@ -80,16 +80,16 @@ struct ucc_geth {
frames) received that were between 128
(Including FCS length==4) and 255 octets */
u32 txok; /* Total number of octets residing in frames
- that where involved in succesfull
+ that where involved in successfull
transmission */
u16 txcf; /* Total number of PAUSE control frames
transmitted by this MAC */
u8 res4[0x2];
u32 tmca; /* Total number of frames that were transmitted
- succesfully with the group address bit set
+ successfully with the group address bit set
that are not broadcast frames */
u32 tbca; /* Total number of frames transmitted
- succesfully that had destination address
+ successfully that had destination address
field equal to the broadcast address */
u32 rxfok; /* Total number of frames received OK */
u32 rxbok; /* Total number of octets received OK */
@@ -98,9 +98,9 @@ struct ucc_geth {
HW because it includes octets in frames that
never even reach the UCC */
u32 rmca; /* Total number of frames that were received
- succesfully with the group address bit set
+ successfully with the group address bit set
that are not broadcast frames */
- u32 rbca; /* Total number of frames received succesfully
+ u32 rbca; /* Total number of frames received successfully
that had destination address equal to the
broadcast address */
u32 scar; /* Statistics carry register */
@@ -759,15 +759,15 @@ struct ucc_geth_hardware_statistics {
frames) received that were between 128
(Including FCS length==4) and 255 octets */
u32 txok; /* Total number of octets residing in frames
- that where involved in succesfull
+ that where involved in successfull
transmission */
u16 txcf; /* Total number of PAUSE control frames
transmitted by this MAC */
u32 tmca; /* Total number of frames that were transmitted
- succesfully with the group address bit set
+ successfully with the group address bit set
that are not broadcast frames */
u32 tbca; /* Total number of frames transmitted
- succesfully that had destination address
+ successfully that had destination address
field equal to the broadcast address */
u32 rxfok; /* Total number of frames received OK */
u32 rxbok; /* Total number of octets received OK */
@@ -776,9 +776,9 @@ struct ucc_geth_hardware_statistics {
HW because it includes octets in frames that
never even reach the UCC */
u32 rmca; /* Total number of frames that were received
- succesfully with the group address bit set
+ successfully with the group address bit set
that are not broadcast frames */
- u32 rbca; /* Total number of frames received succesfully
+ u32 rbca; /* Total number of frames received successfully
that had destination address equal to the
broadcast address */
} __attribute__ ((packed));
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index c6c922247d0..0c3c738d741 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -748,7 +748,7 @@ static int smsc95xx_phy_initialize(struct usbnet *dev)
mii_nway_restart(&dev->mii);
if (netif_msg_ifup(dev))
- devdbg(dev, "phy initialised succesfully");
+ devdbg(dev, "phy initialised successfully");
return 0;
}
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index a7d4fc1a03a..0e52993e207 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -182,7 +182,7 @@ static inline pvc_device* find_pvc(hdlc_device *hdlc, u16 dlci)
if (pvc->dlci == dlci)
return pvc;
if (pvc->dlci > dlci)
- return NULL; /* the listed is sorted */
+ return NULL; /* the list is sorted */
pvc = pvc->next;
}
diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c
index 2ebe935d105..4b6f27e7c82 100644
--- a/drivers/net/wan/lmc/lmc_main.c
+++ b/drivers/net/wan/lmc/lmc_main.c
@@ -927,7 +927,7 @@ static int __devinit lmc_init_one(struct pci_dev *pdev,
sc->lmc_media = &lmc_t1_media;
break;
default:
- printk(KERN_WARNING "%s: LMC UNKOWN CARD!\n", dev->name);
+ printk(KERN_WARNING "%s: LMC UNKNOWN CARD!\n", dev->name);
break;
}
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index e3d2a9de023..7ddb173fd4a 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -1194,7 +1194,7 @@ error:
* device. See the file header for the format. Run all checks on the
* buffer header, then run over each payload's descriptors, verify
* their consistency and act on each payload's contents. If
- * everything is succesful, update the device's statistics.
+ * everything is successful, update the device's statistics.
*
* Note: You need to set the skb to contain only the length of the
* received buffer; for that, use skb_trim(skb, RECEIVED_SIZE).
diff --git a/drivers/net/wireless/ath/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h
index b72338c9bde..952b3a21bbc 100644
--- a/drivers/net/wireless/ath/ath5k/base.h
+++ b/drivers/net/wireless/ath/ath5k/base.h
@@ -36,7 +36,7 @@
*/
/*
- * Defintions for the Atheros Wireless LAN controller driver.
+ * Definitions for the Atheros Wireless LAN controller driver.
*/
#ifndef _DEV_ATH_ATHVAR_H
#define _DEV_ATH_ATHVAR_H
@@ -190,7 +190,7 @@ struct ath5k_softc {
struct ath5k_txq *cabq; /* content after beacon */
int power_level; /* Requested tx power in dbm */
- bool assoc; /* assocate state */
+ bool assoc; /* associate state */
bool enable_beacon; /* true if beacons are on */
};
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index 644962adda9..81ea52c4faf 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -1492,7 +1492,7 @@ ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode)
* This info is used to calibrate the baseband power table. Imagine
* that for each channel there is a power curve that's hw specific
* (depends on amplifier etc) and we try to "correct" this curve using
- * offests we pass on to phy chip (baseband -> before amplifier) so that
+ * offsets we pass on to phy chip (baseband -> before amplifier) so that
* it can use accurate power values when setting tx power (takes amplifier's
* performance on each channel into account).
*
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index bbfdcd5e7cb..72474c0ccaf 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -117,7 +117,7 @@ static unsigned int ath5k_hw_rfb_op(struct ath5k_hw *ah,
/*
* This code is used to optimize rf gain on different environments
- * (temprature mostly) based on feedback from a power detector.
+ * (temperature mostly) based on feedback from a power detector.
*
* It's only used on RF5111 and RF5112, later RF chips seem to have
* auto adjustment on hw -notice they have a much smaller BANK 7 and
@@ -2746,7 +2746,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah,
/* Fill curves in reverse order
* from lower power (max gain)
* to higher power. Use curve -> idx
- * backmaping we did on eeprom init */
+ * backmapping we did on eeprom init */
u8 idx = pdg_curve_to_idx[pdg];
/* Grab the needed curves by index */
@@ -2848,7 +2848,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah,
/* Now we have a set of curves for this
* channel on tmpL (x range is table_max - table_min
* and y values are tmpL[pdg][]) sorted in the same
- * order as EEPROM (because we've used the backmaping).
+ * order as EEPROM (because we've used the backmapping).
* So for RF5112 it's from higher power to lower power
* and for RF2413 it's from lower power to higher power.
* For RF5111 we only have one curve. */
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index c915954d4d5..70fdb9d8db8 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -880,7 +880,7 @@ static bool ath_rc_update_per(struct ath_softc *sc,
* Since this probe succeeded, we allow the next
* probe twice as soon. This allows the maxRate
* to move up faster if the probes are
- * succesful.
+ * successful.
*/
ath_rc_priv->probe_time =
now_msec - rate_table->probe_interval / 2;
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 077480c4916..71e5c996bd0 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2955,7 +2955,7 @@ static void do_periodic_work(struct b43_wldev *dev)
/* Periodic work locking policy:
* The whole periodic work handler is protected by
* wl->mutex. If another lock is needed somewhere in the
- * pwork callchain, it's aquired in-place, where it's needed.
+ * pwork callchain, it's acquired in-place, where it's needed.
*/
static void b43_periodic_work_handler(struct work_struct *work)
{
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index ab6a18c2e9d..4a905b6a886 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -2277,7 +2277,7 @@ static void do_periodic_work(struct b43legacy_wldev *dev)
/* Periodic work locking policy:
* The whole periodic work handler is protected by
* wl->mutex. If another lock is needed somewhere in the
- * pwork callchain, it's aquired in-place, where it's needed.
+ * pwork callchain, it's acquired in-place, where it's needed.
*/
static void b43legacy_periodic_work_handler(struct work_struct *work)
{
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 17a9cb3528f..56afcf041f8 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -578,7 +578,7 @@ static int ipw2100_get_ordinal(struct ipw2100_priv *priv, u32 ord,
/* get number of entries */
field_count = *(((u16 *) & field_info) + 1);
- /* abort if no enought memory */
+ /* abort if no enough memory */
total_length = field_len * field_count;
if (total_length > *len) {
*len = total_length;
@@ -3127,7 +3127,7 @@ static void ipw2100_tx_send_data(struct ipw2100_priv *priv)
IPW_MAX_BDS)) {
/* TODO: Support merging buffers if more than
* IPW_MAX_BDS are used */
- IPW_DEBUG_INFO("%s: Maximum BD theshold exceeded. "
+ IPW_DEBUG_INFO("%s: Maximum BD threshold exceeded. "
"Increase fragmentation level.\n",
priv->net_dev->name);
}
@@ -6897,7 +6897,7 @@ static int ipw2100_wx_get_range(struct net_device *dev,
range->max_qual.updated = 7; /* Updated all three */
range->avg_qual.qual = 70; /* > 8% missed beacons is 'bad' */
- /* TODO: Find real 'good' to 'bad' threshol value for RSSI */
+ /* TODO: Find real 'good' to 'bad' threshold value for RSSI */
range->avg_qual.level = 20 + IPW2100_RSSI_TO_DBM;
range->avg_qual.noise = 0;
range->avg_qual.updated = 7; /* Updated all three */
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index c28984ae46f..09ddd3e6bed 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -792,7 +792,7 @@ static int ipw_get_ordinal(struct ipw_priv *priv, u32 ord, void *val, u32 * len)
/* get number of entries */
field_count = *(((u16 *) & field_info) + 1);
- /* abort if not enought memory */
+ /* abort if not enough memory */
total_len = field_len * field_count;
if (total_len > *len) {
*len = total_len;
@@ -7760,7 +7760,7 @@ static void ipw_rebuild_decrypted_skb(struct ipw_priv *priv,
case SEC_LEVEL_0:
break;
default:
- printk(KERN_ERR "Unknow security level %d\n",
+ printk(KERN_ERR "Unknown security level %d\n",
priv->ieee->sec.level);
break;
}
@@ -8926,7 +8926,7 @@ static int ipw_wx_get_range(struct net_device *dev,
range->max_qual.updated = 7; /* Updated all three */
range->avg_qual.qual = 70;
- /* TODO: Find real 'good' to 'bad' threshol value for RSSI */
+ /* TODO: Find real 'good' to 'bad' threshold value for RSSI */
range->avg_qual.level = 0; /* FIXME to real average level */
range->avg_qual.noise = 0;
range->avg_qual.updated = 7; /* Updated all three */
@@ -10299,7 +10299,7 @@ static int ipw_tx_skb(struct ipw_priv *priv, struct libipw_txb *txb,
case SEC_LEVEL_0:
break;
default:
- printk(KERN_ERR "Unknow security level %d\n",
+ printk(KERN_ERR "Unknown security level %d\n",
priv->ieee->sec.level);
break;
}
diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c
index bf21eb383db..1ae0b2b02c3 100644
--- a/drivers/net/wireless/ipw2x00/libipw_module.c
+++ b/drivers/net/wireless/ipw2x00/libipw_module.c
@@ -199,7 +199,7 @@ struct net_device *alloc_ieee80211(int sizeof_priv, int monitor)
ieee->host_decrypt = 1;
ieee->host_mc_decrypt = 1;
- /* Host fragementation in Open mode. Default is enabled.
+ /* Host fragmentation in Open mode. Default is enabled.
* Note: host fragmentation is always enabled if host encryption
* is enabled. For cards can do hardware encryption, they must do
* hardware fragmentation as well. So we don't need a variable
diff --git a/drivers/net/wireless/iwmc3200wifi/hal.c b/drivers/net/wireless/iwmc3200wifi/hal.c
index c430418248b..d13c8853ee8 100644
--- a/drivers/net/wireless/iwmc3200wifi/hal.c
+++ b/drivers/net/wireless/iwmc3200wifi/hal.c
@@ -411,7 +411,7 @@ static void iwm_build_lmac_hdr(struct iwm_priv *iwm, struct iwm_lmac_hdr *hdr,
/*
* iwm_hal_send_host_cmd(): sends commands to the UMAC or the LMAC.
* Sending command to the LMAC is equivalent to sending a
- * regular UMAC command with the LMAC passtrough or the LMAC
+ * regular UMAC command with the LMAC passthrough or the LMAC
* wrapper UMAC command IDs.
*/
int iwm_hal_send_host_cmd(struct iwm_priv *iwm,
diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c
index 72c27a3e552..1c57c1f72cb 100644
--- a/drivers/net/wireless/iwmc3200wifi/rx.c
+++ b/drivers/net/wireless/iwmc3200wifi/rx.c
@@ -1578,7 +1578,7 @@ static void iwm_rx_process_packet(struct iwm_priv *iwm,
kfree_skb(packet->skb);
break;
default:
- IWM_ERR(iwm, "Unknow ticket action: %d\n",
+ IWM_ERR(iwm, "Unknown ticket action: %d\n",
le16_to_cpu(ticket_node->ticket->action));
kfree_skb(packet->skb);
}
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index 09fcfad742e..7a73f625273 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -993,7 +993,7 @@ static int if_sdio_probe(struct sdio_func *func,
}
if (i == ARRAY_SIZE(if_sdio_models)) {
- lbs_pr_err("unkown card model 0x%x\n", card->model);
+ lbs_pr_err("unknown card model 0x%x\n", card->model);
ret = -ENODEV;
goto free;
}
diff --git a/drivers/net/wireless/orinoco/hermes_dld.c b/drivers/net/wireless/orinoco/hermes_dld.c
index a3eefe109df..84200da900b 100644
--- a/drivers/net/wireless/orinoco/hermes_dld.c
+++ b/drivers/net/wireless/orinoco/hermes_dld.c
@@ -550,7 +550,7 @@ static const struct { \
#define DEFAULT_PDR(pid) default_pdr_data_##pid
-/* HWIF Compatiblity */
+/* HWIF Compatibility */
DEFINE_DEFAULT_PDR(0x0005, 10, "\x00\x00\x06\x00\x01\x00\x01\x00\x01\x00");
/* PPPPSign */
@@ -656,7 +656,7 @@ int hermes_apply_pda_with_defaults(hermes_t *hw,
record_id + 1, pdi);
}
break;
- case 0x5: /* HWIF Compatiblity */
+ case 0x5: /* HWIF Compatibility */
default_pdi = (struct pdi *) &DEFAULT_PDR(0x0005);
break;
case 0x108: /* PPPPSign */
diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c
index bc08464d832..f7f5c793514 100644
--- a/drivers/net/wireless/prism54/isl_ioctl.c
+++ b/drivers/net/wireless/prism54/isl_ioctl.c
@@ -1897,7 +1897,7 @@ prism54_get_mac(struct net_device *ndev, struct iw_request_info *info,
return 0;
}
-/* Setting policy also clears the MAC acl, even if we don't change the defaut
+/* Setting policy also clears the MAC acl, even if we don't change the default
* policy
*/
@@ -2323,7 +2323,7 @@ prism54_process_trap_helper(islpci_private *priv, enum oid_num_t oid,
case DOT11_OID_BEACON:
send_formatted_event(priv,
- "Received a beacon from an unkown AP",
+ "Received a beacon from an unknown AP",
mlme, 0);
break;
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h
index 6c21ef66dfe..c3dea697b90 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.h
+++ b/drivers/net/wireless/rt2x00/rt2400pci.h
@@ -35,7 +35,7 @@
/*
* Signal information.
- * Defaul offset is required for RSSI <-> dBm conversion.
+ * Default offset is required for RSSI <-> dBm conversion.
*/
#define DEFAULT_RSSI_OFFSET 100
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.h b/drivers/net/wireless/rt2x00/rt2500pci.h
index b0075674c09..c6bd1fcae7e 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.h
+++ b/drivers/net/wireless/rt2x00/rt2500pci.h
@@ -46,7 +46,7 @@
/*
* Signal information.
- * Defaul offset is required for RSSI <-> dBm conversion.
+ * Default offset is required for RSSI <-> dBm conversion.
*/
#define DEFAULT_RSSI_OFFSET 121
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h
index 341a7045463..b493306a7ee 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.h
+++ b/drivers/net/wireless/rt2x00/rt2500usb.h
@@ -46,7 +46,7 @@
/*
* Signal information.
- * Defaul offset is required for RSSI <-> dBm conversion.
+ * Default offset is required for RSSI <-> dBm conversion.
*/
#define DEFAULT_RSSI_OFFSET 120
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
index 6f33f7f5668..8f13810622b 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -37,7 +37,7 @@
/*
* Signal information.
- * Defaul offset is required for RSSI <-> dBm conversion.
+ * Default offset is required for RSSI <-> dBm conversion.
*/
#define DEFAULT_RSSI_OFFSET 120
diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h
index e783a099a8f..7942f810e92 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.h
+++ b/drivers/net/wireless/rt2x00/rt73usb.h
@@ -37,7 +37,7 @@
/*
* Signal information.
- * Defaul offset is required for RSSI <-> dBm conversion.
+ * Default offset is required for RSSI <-> dBm conversion.
*/
#define DEFAULT_RSSI_OFFSET 120
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 8a243732c51..cf51e8f8174 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -374,7 +374,7 @@ static void zd_mac_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
* zd_mac_tx_failed - callback for failed frames
* @dev: the mac80211 wireless device
*
- * This function is called if a frame couldn't be succesfully be
+ * This function is called if a frame couldn't be successfully be
* transferred. The first frame from the tx queue, will be selected and
* reported as error to the upper layers.
*/
diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index a6b4a5a53d4..f511e70d454 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -650,7 +650,7 @@ ccio_clear_io_tlb(struct ioc *ioc, dma_addr_t iovp, size_t byte_cnt)
* Mark the I/O Pdir entries invalid and blow away the corresponding I/O
* TLB entries.
*
- * FIXME: at some threshhold it might be "cheaper" to just blow
+ * FIXME: at some threshold it might be "cheaper" to just blow
* away the entire I/O TLB instead of individual entries.
*
* FIXME: Uturn has 256 TLB entries. We don't need to purge every
diff --git a/drivers/platform/Kconfig b/drivers/platform/Kconfig
index 9652c3fe7f5..8390dca2b4e 100644
--- a/drivers/platform/Kconfig
+++ b/drivers/platform/Kconfig
@@ -1,5 +1,3 @@
-# drivers/platform/Kconfig
-
if X86
source "drivers/platform/x86/Kconfig"
endif
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index a848c7e20ae..edb16908384 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -6545,7 +6545,7 @@ static struct ibm_struct volume_driver_data = {
* The speeds are stored on handles
* (FANA:FAN9), (FANC:FANB), (FANE:FAND).
*
- * There are three default speed sets, acessible as handles:
+ * There are three default speed sets, accessible as handles:
* FS1L,FS1M,FS1H; FS2L,FS2M,FS2H; FS3L,FS3M,FS3H
*
* ACPI DSDT switches which set is in use depending on various
diff --git a/drivers/pnp/pnpbios/rsparser.c b/drivers/pnp/pnpbios/rsparser.c
index 87b4f49a525..a5135ebe5f0 100644
--- a/drivers/pnp/pnpbios/rsparser.c
+++ b/drivers/pnp/pnpbios/rsparser.c
@@ -191,7 +191,7 @@ static unsigned char *pnpbios_parse_allocated_resource_data(struct pnp_dev *dev,
return (unsigned char *)p;
break;
- default: /* an unkown tag */
+ default: /* an unknown tag */
len_err:
dev_err(&dev->dev, "unknown tag %#x length %d\n",
tag, len);
@@ -405,7 +405,7 @@ pnpbios_parse_resource_option_data(unsigned char *p, unsigned char *end,
case SMALL_TAG_END:
return p + 2;
- default: /* an unkown tag */
+ default: /* an unknown tag */
len_err:
dev_err(&dev->dev, "unknown tag %#x length %d\n",
tag, len);
@@ -475,7 +475,7 @@ static unsigned char *pnpbios_parse_compatible_ids(unsigned char *p,
return (unsigned char *)p;
break;
- default: /* an unkown tag */
+ default: /* an unknown tag */
len_err:
dev_err(&dev->dev, "unknown tag %#x length %d\n",
tag, len);
@@ -744,7 +744,7 @@ static unsigned char *pnpbios_encode_allocated_resource_data(struct pnp_dev
return (unsigned char *)p;
break;
- default: /* an unkown tag */
+ default: /* an unknown tag */
len_err:
dev_err(&dev->dev, "unknown tag %#x length %d\n",
tag, len);
diff --git a/drivers/ps3/ps3-sys-manager.c b/drivers/ps3/ps3-sys-manager.c
index 88cb7408861..3cbaf1811bd 100644
--- a/drivers/ps3/ps3-sys-manager.c
+++ b/drivers/ps3/ps3-sys-manager.c
@@ -46,7 +46,7 @@
/**
* struct ps3_sys_manager_header - System manager message header.
* @version: Header version, currently 1.
- * @size: Header size in bytes, curently 16.
+ * @size: Header size in bytes, currently 16.
* @payload_size: Message payload size in bytes.
* @service_id: Message type, one of enum ps3_sys_manager_service_id.
* @request_tag: Unique number to identify reply.
diff --git a/drivers/rtc/rtc-ds1511.c b/drivers/rtc/rtc-ds1511.c
index 0b6b7730c71..539676e25fd 100644
--- a/drivers/rtc/rtc-ds1511.c
+++ b/drivers/rtc/rtc-ds1511.c
@@ -2,7 +2,7 @@
* An rtc driver for the Dallas DS1511
*
* Copyright (C) 2006 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
- * Copyright (C) 2007 Andrew Sharp <andy.sharp@onstor.com>
+ * Copyright (C) 2007 Andrew Sharp <andy.sharp@lsi.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -636,7 +636,7 @@ ds1511_rtc_exit(void)
module_init(ds1511_rtc_init);
module_exit(ds1511_rtc_exit);
-MODULE_AUTHOR("Andrew Sharp <andy.sharp@onstor.com>");
+MODULE_AUTHOR("Andrew Sharp <andy.sharp@lsi.com>");
MODULE_DESCRIPTION("Dallas DS1511 RTC driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/rtc/rtc-stk17ta8.c b/drivers/rtc/rtc-stk17ta8.c
index 7d1547b0070..d491eb265c3 100644
--- a/drivers/rtc/rtc-stk17ta8.c
+++ b/drivers/rtc/rtc-stk17ta8.c
@@ -286,7 +286,7 @@ static struct bin_attribute stk17ta8_nvram_attr = {
.write = stk17ta8_nvram_write,
};
-static int __init stk17ta8_rtc_probe(struct platform_device *pdev)
+static int __devinit stk17ta8_rtc_probe(struct platform_device *pdev)
{
struct rtc_device *rtc;
struct resource *res;
diff --git a/drivers/rtc/rtc-v3020.c b/drivers/rtc/rtc-v3020.c
index 423cd5a30b1..ad741afd47d 100644
--- a/drivers/rtc/rtc-v3020.c
+++ b/drivers/rtc/rtc-v3020.c
@@ -335,7 +335,7 @@ static int rtc_probe(struct platform_device *pdev)
goto err_io;
}
- /* Make sure frequency measurment mode, test modes, and lock
+ /* Make sure frequency measurement mode, test modes, and lock
* are all disabled */
v3020_set_reg(chip, V3020_STATUS_0, 0x0);
diff --git a/drivers/s390/block/dasd_proc.c b/drivers/s390/block/dasd_proc.c
index 654daa3cdfd..5f23eca8280 100644
--- a/drivers/s390/block/dasd_proc.c
+++ b/drivers/s390/block/dasd_proc.c
@@ -215,7 +215,7 @@ dasd_statistics_read(char *page, char **start, off_t off,
}
prof = &dasd_global_profile;
- /* prevent couter 'overflow' on output */
+ /* prevent counter 'overflow' on output */
for (factor = 1; (prof->dasd_io_reqs / factor) > 9999999;
factor *= 10);
diff --git a/drivers/s390/char/fs3270.c b/drivers/s390/char/fs3270.c
index d449063c30f..28e4649fa9e 100644
--- a/drivers/s390/char/fs3270.c
+++ b/drivers/s390/char/fs3270.c
@@ -76,7 +76,7 @@ fs3270_do_io(struct raw3270_view *view, struct raw3270_request *rq)
}
rc = raw3270_start(view, rq);
if (rc == 0) {
- /* Started sucessfully. Now wait for completion. */
+ /* Started successfully. Now wait for completion. */
wait_event(fp->wait, raw3270_request_final(rq));
}
} while (rc == -EACCES);
diff --git a/drivers/s390/cio/chp.c b/drivers/s390/cio/chp.c
index 8ab51608da5..c268a2e5b7c 100644
--- a/drivers/s390/cio/chp.c
+++ b/drivers/s390/cio/chp.c
@@ -65,7 +65,7 @@ static void set_chp_logically_online(struct chp_id chpid, int onoff)
chpid_to_chp(chpid)->state = onoff;
}
-/* On succes return 0 if channel-path is varied offline, 1 if it is varied
+/* On success return 0 if channel-path is varied offline, 1 if it is varied
* online. Return -ENODEV if channel-path is not registered. */
int chp_get_status(struct chp_id chpid)
{
diff --git a/drivers/s390/cio/cmf.c b/drivers/s390/cio/cmf.c
index 30f51611130..2985eb43948 100644
--- a/drivers/s390/cio/cmf.c
+++ b/drivers/s390/cio/cmf.c
@@ -462,7 +462,7 @@ static struct cmb_area cmb_area = {
* block of memory, which can not be moved as long as any channel
* is active. Therefore, a maximum number of subchannels needs to
* be defined somewhere. This is a module parameter, defaulting to
- * a resonable value of 1024, or 32 kb of memory.
+ * a reasonable value of 1024, or 32 kb of memory.
* Current kernels don't allow kmalloc with more than 128kb, so the
* maximum is 4096.
*/
diff --git a/drivers/s390/net/qeth_core_mpc.h b/drivers/s390/net/qeth_core_mpc.h
index 52c03438dbe..1ba51152f66 100644
--- a/drivers/s390/net/qeth_core_mpc.h
+++ b/drivers/s390/net/qeth_core_mpc.h
@@ -528,7 +528,7 @@ extern unsigned char ULP_ENABLE[];
(PDU_ENCAPSULATION(buffer) + 0x17)
#define QETH_ULP_ENABLE_RESP_LINK_TYPE(buffer) \
(PDU_ENCAPSULATION(buffer) + 0x2b)
-/* Layer 2 defintions */
+/* Layer 2 definitions */
#define QETH_PROT_LAYER2 0x08
#define QETH_PROT_TCPIP 0x03
#define QETH_PROT_OSN2 0x0a
diff --git a/drivers/sbus/char/envctrl.c b/drivers/sbus/char/envctrl.c
index 58e583b61e6..aa2b60a868b 100644
--- a/drivers/sbus/char/envctrl.c
+++ b/drivers/sbus/char/envctrl.c
@@ -92,11 +92,11 @@
#define ENVCTRL_CPUTEMP_MON 1 /* cpu temperature monitor */
#define ENVCTRL_CPUVOLTAGE_MON 2 /* voltage monitor */
#define ENVCTRL_FANSTAT_MON 3 /* fan status monitor */
-#define ENVCTRL_ETHERTEMP_MON 4 /* ethernet temperarture */
+#define ENVCTRL_ETHERTEMP_MON 4 /* ethernet temperature */
/* monitor */
#define ENVCTRL_VOLTAGESTAT_MON 5 /* voltage status monitor */
#define ENVCTRL_MTHRBDTEMP_MON 6 /* motherboard temperature */
-#define ENVCTRL_SCSITEMP_MON 7 /* scsi temperarture */
+#define ENVCTRL_SCSITEMP_MON 7 /* scsi temperature */
#define ENVCTRL_GLOBALADDR_MON 8 /* global address */
/* Child device type.
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index 2d16d49fd3c..3bf75924741 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -736,7 +736,7 @@ static int twa_chrdev_ioctl(struct inode *inode, struct file *file, unsigned int
break;
case TW_IOCTL_GET_COMPATIBILITY_INFO:
tw_ioctl->driver_command.status = 0;
- /* Copy compatiblity struct into ioctl data buffer */
+ /* Copy compatibility struct into ioctl data buffer */
tw_compat_info = (TW_Compatibility_Info *)tw_ioctl->data_buffer;
memcpy(tw_compat_info, &tw_dev->tw_compat_info, sizeof(TW_Compatibility_Info));
break;
diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c
index d224294c38f..f65a1e92340 100644
--- a/drivers/scsi/3w-xxxx.c
+++ b/drivers/scsi/3w-xxxx.c
@@ -8,7 +8,7 @@
Copyright (C) 1999-2009 3ware Inc.
- Kernel compatiblity By: Andre Hedrick <andre@suse.com>
+ Kernel compatibility By: Andre Hedrick <andre@suse.com>
Non-Copyright (C) 2000 Andre Hedrick <andre@suse.com>
Further tiny build fixes and trivial hoovering Alan Cox
diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
index 6c60a8060c5..9f4a911a6d8 100644
--- a/drivers/scsi/53c700.c
+++ b/drivers/scsi/53c700.c
@@ -1491,7 +1491,7 @@ NCR_700_intr(int irq, void *dev_id)
unsigned long flags;
int handled = 0;
- /* Use the host lock to serialise acess to the 53c700
+ /* Use the host lock to serialise access to the 53c700
* hardware. Note: In future, we may need to take the queue
* lock to enter the done routines. When that happens, we
* need to ensure that for this driver, the host lock and the
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index cdbdec9f4fb..83986ed8655 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -526,10 +526,10 @@ struct aac_driver_ident
/*
* The adapter interface specs all queues to be located in the same
- * physically contigous block. The host structure that defines the
+ * physically contiguous block. The host structure that defines the
* commuication queues will assume they are each a separate physically
- * contigous memory region that will support them all being one big
- * contigous block.
+ * contiguous memory region that will support them all being one big
+ * contiguous block.
* There is a command and response queue for each level and direction of
* commuication. These regions are accessed by both the host and adapter.
*/
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
index d598eba630d..666d5151d62 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -226,7 +226,7 @@ static int aac_comm_init(struct aac_dev * dev)
spin_lock_init(&dev->fib_lock);
/*
- * Allocate the physically contigous space for the commuication
+ * Allocate the physically contiguous space for the commuication
* queue headers.
*/
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index b756041f0b2..22626abdb63 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -7969,7 +7969,7 @@ static int advansys_reset(struct scsi_cmnd *scp)
ASC_DBG(1, "before AscInitAsc1000Driver()\n");
status = AscInitAsc1000Driver(asc_dvc);
- /* Refer to ASC_IERR_* defintions for meaning of 'err_code'. */
+ /* Refer to ASC_IERR_* definitions for meaning of 'err_code'. */
if (asc_dvc->err_code) {
scmd_printk(KERN_INFO, scp, "SCSI bus reset error: "
"0x%x\n", asc_dvc->err_code);
diff --git a/drivers/scsi/aic7xxx/aic79xx.seq b/drivers/scsi/aic7xxx/aic79xx.seq
index 58bc17591b5..2fb78e35a9e 100644
--- a/drivers/scsi/aic7xxx/aic79xx.seq
+++ b/drivers/scsi/aic7xxx/aic79xx.seq
@@ -217,7 +217,7 @@ BEGIN_CRITICAL;
scbdma_tohost_done:
test CCSCBCTL, CCARREN jz fill_qoutfifo_dmadone;
/*
- * An SCB has been succesfully uploaded to the host.
+ * An SCB has been successfully uploaded to the host.
* If the SCB was uploaded for some reason other than
* bad SCSI status (currently only for underruns), we
* queue the SCB for normal completion. Otherwise, we
@@ -1281,7 +1281,7 @@ END_CRITICAL;
* Is it a disconnect message? Set a flag in the SCB to remind us
* and await the bus going free. If this is an untagged transaction
* store the SCB id for it in our untagged target table for lookup on
- * a reselction.
+ * a reselection.
*/
mesgin_disconnect:
/*
diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c
index 63b521d615f..4d419c155ce 100644
--- a/drivers/scsi/aic7xxx/aic79xx_core.c
+++ b/drivers/scsi/aic7xxx/aic79xx_core.c
@@ -2487,7 +2487,7 @@ ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat)
/*
* Although the driver does not care about the
* 'Selection in Progress' status bit, the busy
- * LED does. SELINGO is only cleared by a sucessfull
+ * LED does. SELINGO is only cleared by a successfull
* selection, so we must manually clear it to insure
* the LED turns off just incase no future successful
* selections occur (e.g. no devices on the bus).
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index 75b23317bd2..1222a7ac698 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -2335,7 +2335,7 @@ ahd_linux_queue_abort_cmd(struct scsi_cmnd *cmd)
/*
* The sequencer will never re-reference the
* in-core SCB. To make sure we are notified
- * during reslection, set the MK_MESSAGE flag in
+ * during reselection, set the MK_MESSAGE flag in
* the card's copy of the SCB.
*/
ahd_outb(ahd, SCB_CONTROL,
diff --git a/drivers/scsi/aic7xxx/aic7xxx.seq b/drivers/scsi/aic7xxx/aic7xxx.seq
index 15196390e28..5a4cfc954a9 100644
--- a/drivers/scsi/aic7xxx/aic7xxx.seq
+++ b/drivers/scsi/aic7xxx/aic7xxx.seq
@@ -1693,7 +1693,7 @@ if ((ahc->flags & AHC_INITIATORROLE) != 0) {
* Is it a disconnect message? Set a flag in the SCB to remind us
* and await the bus going free. If this is an untagged transaction
* store the SCB id for it in our untagged target table for lookup on
- * a reselction.
+ * a reselection.
*/
mesgin_disconnect:
/*
diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c
index 8dfb59d5899..45aa728a76b 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_core.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_core.c
@@ -1733,7 +1733,7 @@ ahc_handle_scsiint(struct ahc_softc *ahc, u_int intstat)
/*
* Although the driver does not care about the
* 'Selection in Progress' status bit, the busy
- * LED does. SELINGO is only cleared by a sucessfull
+ * LED does. SELINGO is only cleared by a successfull
* selection, so we must manually clear it to insure
* the LED turns off just incase no future successful
* selections occur (e.g. no devices on the bus).
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index fd2b9785ff4..8cb05dc8e6a 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -2290,7 +2290,7 @@ ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag)
* In the non-paging case, the sequencer will
* never re-reference the in-core SCB.
* To make sure we are notified during
- * reslection, set the MK_MESSAGE flag in
+ * reselection, set the MK_MESSAGE flag in
* the card's copy of the SCB.
*/
if ((ahc->flags & AHC_PAGESCBS) == 0) {
diff --git a/drivers/scsi/aic94xx/aic94xx_reg_def.h b/drivers/scsi/aic94xx/aic94xx_reg_def.h
index a43e8cdf4ee..28aaf349c11 100644
--- a/drivers/scsi/aic94xx/aic94xx_reg_def.h
+++ b/drivers/scsi/aic94xx/aic94xx_reg_def.h
@@ -1,5 +1,5 @@
/*
- * Aic94xx SAS/SATA driver hardware registers defintions.
+ * Aic94xx SAS/SATA driver hardware registers definitions.
*
* Copyright (C) 2004 Adaptec, Inc. All rights reserved.
* Copyright (C) 2004 David Chaw <david_chaw@adaptec.com>
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_pport.h b/drivers/scsi/bfa/include/defs/bfa_defs_pport.h
index a000bc4e2d4..bf320412ee2 100644
--- a/drivers/scsi/bfa/include/defs/bfa_defs_pport.h
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_pport.h
@@ -61,7 +61,7 @@ enum bfa_pport_speed {
* Port operational type (in sync with SNIA port type).
*/
enum bfa_pport_type {
- BFA_PPORT_TYPE_UNKNOWN = 1, /* port type is unkown */
+ BFA_PPORT_TYPE_UNKNOWN = 1, /* port type is unknown */
BFA_PPORT_TYPE_TRUNKED = 2, /* Trunked mode */
BFA_PPORT_TYPE_NPORT = 5, /* P2P with switched fabric */
BFA_PPORT_TYPE_NLPORT = 6, /* public loop */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h b/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h
index 31881d21851..ade763dbc8c 100644
--- a/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h
@@ -25,7 +25,7 @@
* Temperature sensor status values
*/
enum bfa_tsensor_status {
- BFA_TSENSOR_STATUS_UNKNOWN = 1, /* unkown status */
+ BFA_TSENSOR_STATUS_UNKNOWN = 1, /* unknown status */
BFA_TSENSOR_STATUS_FAULTY = 2, /* sensor is faulty */
BFA_TSENSOR_STATUS_BELOW_MIN = 3, /* temperature below mininum */
BFA_TSENSOR_STATUS_NOMINAL = 4, /* normal temperature */
diff --git a/drivers/scsi/bfa/include/protocol/ct.h b/drivers/scsi/bfa/include/protocol/ct.h
index c8648bcba41..b82540a230c 100644
--- a/drivers/scsi/bfa/include/protocol/ct.h
+++ b/drivers/scsi/bfa/include/protocol/ct.h
@@ -82,7 +82,7 @@ enum {
};
/*
- * defintions for CT reason code
+ * definitions for CT reason code
*/
enum {
CT_RSN_INV_CMD = 0x01,
@@ -129,7 +129,7 @@ enum {
};
/*
- * defintions for the explanation code for all servers
+ * definitions for the explanation code for all servers
*/
enum {
CT_EXP_AUTH_EXCEPTION = 0xF1,
diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
index 070118a8f18..132898c88d5 100644
--- a/drivers/scsi/bnx2i/bnx2i_iscsi.c
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -1879,7 +1879,7 @@ static void bnx2i_ep_disconnect(struct iscsi_endpoint *ep)
bnx2i_ep = ep->dd_data;
- /* driver should not attempt connection cleanup untill TCP_CONNECT
+ /* driver should not attempt connection cleanup until TCP_CONNECT
* completes either successfully or fails. Timeout is 9-secs, so
* wait for it to complete
*/
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 075e2397273..6c59c02c1ed 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -1509,7 +1509,7 @@ static u8 start_scsi(struct AdapterCtlBlk* acb, struct DeviceCtlBlk* dcb,
* Try anyway?
*
* We could, BUT: Sometimes the TRM_S1040 misses to produce a Selection
- * Timeout, a Disconnect or a Reselction IRQ, so we would be screwed!
+ * Timeout, a Disconnect or a Reselection IRQ, so we would be screwed!
* (This is likely to be a bug in the hardware. Obviously, most people
* only have one initiator per SCSI bus.)
* Instead let this fail and have the timer make sure the command is
diff --git a/drivers/scsi/dmx3191d.c b/drivers/scsi/dmx3191d.c
index fa738ec8692..207352cc70c 100644
--- a/drivers/scsi/dmx3191d.c
+++ b/drivers/scsi/dmx3191d.c
@@ -31,7 +31,7 @@
#include <scsi/scsi_host.h>
/*
- * Defintions for the generic 5380 driver.
+ * Definitions for the generic 5380 driver.
*/
#define AUTOSENSE
diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c
index 901a3daeb36..4f0556571f8 100644
--- a/drivers/scsi/hptiop.c
+++ b/drivers/scsi/hptiop.c
@@ -834,7 +834,7 @@ static int hptiop_reset_hba(struct hptiop_hba *hba)
atomic_read(&hba->resetting) == 0, 60 * HZ);
if (atomic_read(&hba->resetting)) {
- /* IOP is in unkown state, abort reset */
+ /* IOP is in unknown state, abort reset */
printk(KERN_ERR "scsi%d: reset failed\n", hba->host->host_no);
return -1;
}
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index bbf4152c9c6..74338c83ad0 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -56,7 +56,7 @@
* at the same time.
*
* When discovery succeeds or fails a callback is made to the lport as
- * notification. Currently, succesful discovery causes the lport to take no
+ * notification. Currently, successful discovery causes the lport to take no
* action. A failure will cause the lport to reset. There is likely a circular
* locking problem with this implementation.
*/
diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c
index 2e0746d7030..ca25ee5190b 100644
--- a/drivers/scsi/libiscsi_tcp.c
+++ b/drivers/scsi/libiscsi_tcp.c
@@ -1004,7 +1004,7 @@ static struct iscsi_r2t_info *iscsi_tcp_get_curr_r2t(struct iscsi_task *task)
* iscsi_tcp_task_xmit - xmit normal PDU task
* @task: iscsi command task
*
- * We're expected to return 0 when everything was transmitted succesfully,
+ * We're expected to return 0 when everything was transmitted successfully,
* -EAGAIN if there's still data in the queue, or != 0 for any other kind
* of error.
*/
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 75523603b91..91542f786ed 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -678,7 +678,7 @@ lpfc_selective_reset(struct lpfc_hba *phba)
* Notes:
* Assumes any error from lpfc_selective_reset() will be negative.
* If lpfc_selective_reset() returns zero then the length of the buffer
- * is returned which indicates succcess
+ * is returned which indicates success
*
* Returns:
* -EINVAL if the buffer does not contain the string "selective"
@@ -3363,7 +3363,7 @@ sysfs_ctlreg_write(struct kobject *kobj, struct bin_attribute *bin_attr,
* sysfs_ctlreg_read - Read method for reading from ctlreg
* @kobj: kernel kobject that contains the kernel class device.
* @bin_attr: kernel attributes passed to us.
- * @buf: if succesful contains the data from the adapter IOREG space.
+ * @buf: if successful contains the data from the adapter IOREG space.
* @off: offset into buffer to beginning of data.
* @count: bytes to transfer.
*
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index a079bbc03cf..ce522702a6c 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -815,7 +815,7 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
/* FLOGI completes successfully */
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
- "0101 FLOGI completes sucessfully "
+ "0101 FLOGI completes successfully "
"Data: x%x x%x x%x x%x\n",
irsp->un.ulpWord[4], sp->cmn.e_d_tov,
sp->cmn.w2.r_a_tov, sp->cmn.edtovResolution);
@@ -4151,7 +4151,7 @@ lpfc_els_rcv_rscn(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
/* Indicate we are walking fc_rscn_id_list on this vport */
vport->fc_rscn_flush = 1;
spin_unlock_irq(shost->host_lock);
- /* Get the array count after sucessfully have the token */
+ /* Get the array count after successfully have the token */
rscn_cnt = vport->fc_rscn_id_cnt;
/* If we are already processing an RSCN, save the received
* RSCN payload buffer, cmdiocb->context2 to process later.
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 0ba35a9a5c5..226920d15ea 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -646,7 +646,7 @@ lpfc_hba_down_prep(struct lpfc_hba *phba)
* down the SLI Layer.
*
* Return codes
- * 0 - sucess.
+ * 0 - success.
* Any other value - error.
**/
static int
@@ -701,7 +701,7 @@ lpfc_hba_down_post_s3(struct lpfc_hba *phba)
* down the SLI Layer.
*
* Return codes
- * 0 - sucess.
+ * 0 - success.
* Any other value - error.
**/
static int
@@ -756,7 +756,7 @@ lpfc_hba_down_post_s4(struct lpfc_hba *phba)
* uninitialization after the HBA is reset when bring down the SLI Layer.
*
* Return codes
- * 0 - sucess.
+ * 0 - success.
* Any other value - error.
**/
int
@@ -1262,7 +1262,7 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
* routine from the API jump table function pointer from the lpfc_hba struct.
*
* Return codes
- * 0 - sucess.
+ * 0 - success.
* Any other value - error.
**/
void
@@ -3234,7 +3234,7 @@ static void lpfc_log_intr_mode(struct lpfc_hba *phba, uint32_t intr_mode)
* PCI devices.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -3330,7 +3330,7 @@ lpfc_reset_hba(struct lpfc_hba *phba)
* support the SLI-3 HBA device it attached to.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -3431,7 +3431,7 @@ lpfc_sli_driver_resource_unset(struct lpfc_hba *phba)
* support the SLI-4 HBA device it attached to.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -3758,7 +3758,7 @@ lpfc_init_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
* device specific resource setup to support the HBA device it attached to.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -3804,7 +3804,7 @@ lpfc_setup_driver_resource_phase1(struct lpfc_hba *phba)
* device specific resource setup to support the HBA device it attached to.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -3869,7 +3869,7 @@ lpfc_free_iocb_list(struct lpfc_hba *phba)
* list and set up the IOCB tag array accordingly.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -3988,7 +3988,7 @@ lpfc_free_active_sgl(struct lpfc_hba *phba)
* list and set up the sgl xritag tag array accordingly.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -4102,7 +4102,7 @@ out_free_mem:
* enabled and the driver is reinitializing the device.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
@@ -4262,7 +4262,7 @@ lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *phba)
* PCI device data structure is set.
*
* Return codes
- * pointer to @phba - sucessful
+ * pointer to @phba - successful
* NULL - error
**/
static struct lpfc_hba *
@@ -4318,7 +4318,7 @@ lpfc_hba_free(struct lpfc_hba *phba)
* host with it.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -4487,7 +4487,7 @@ lpfc_post_init_setup(struct lpfc_hba *phba)
* with SLI-3 interface spec.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -4782,7 +4782,7 @@ lpfc_sli4_bar2_register_memmap(struct lpfc_hba *phba, uint32_t vf)
* this routine.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - could not allocated memory.
**/
static int
@@ -4881,7 +4881,7 @@ lpfc_destroy_bootstrap_mbox(struct lpfc_hba *phba)
* allocation for the port.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
@@ -4982,7 +4982,7 @@ lpfc_sli4_read_config(struct lpfc_hba *phba)
* HBA consistent with the SLI-4 interface spec.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
@@ -5031,7 +5031,7 @@ lpfc_setup_endian_order(struct lpfc_hba *phba)
* we just use some constant number as place holder.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
@@ -5326,7 +5326,7 @@ out_error:
* operation.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
@@ -5390,7 +5390,7 @@ lpfc_sli4_queue_destroy(struct lpfc_hba *phba)
* operation.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
@@ -5635,7 +5635,7 @@ out_error:
* operation.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
@@ -5680,7 +5680,7 @@ lpfc_sli4_queue_unset(struct lpfc_hba *phba)
* Later, this can be used for all the slow-path events.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* -ENOMEM - No availble memory
**/
static int
@@ -5841,7 +5841,7 @@ lpfc_sli4_cq_event_release_all(struct lpfc_hba *phba)
* all resources assigned to the PCI function which originates this request.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
@@ -6004,7 +6004,7 @@ lpfc_sli4_fcfi_unreg(struct lpfc_hba *phba, uint16_t fcfi)
* with SLI-4 interface spec.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -6133,7 +6133,7 @@ lpfc_sli4_pci_mem_unset(struct lpfc_hba *phba)
* will be left with MSI-X enabled and leaks its vectors.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -6265,7 +6265,7 @@ lpfc_sli_disable_msix(struct lpfc_hba *phba)
* is done in this function.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
*/
static int
@@ -6324,7 +6324,7 @@ lpfc_sli_disable_msi(struct lpfc_hba *phba)
* MSI-X -> MSI -> IRQ.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static uint32_t
@@ -6414,7 +6414,7 @@ lpfc_sli_disable_intr(struct lpfc_hba *phba)
* enabled and leaks its vectors.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -6524,7 +6524,7 @@ lpfc_sli4_disable_msix(struct lpfc_hba *phba)
* which is done in this function.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -6589,7 +6589,7 @@ lpfc_sli4_disable_msi(struct lpfc_hba *phba)
* MSI-X -> MSI -> IRQ.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static uint32_t
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index b3a69f984d9..7935667b81a 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1804,7 +1804,7 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba)
*/
if (lpfc_sli_chk_mbx_command(pmbox->mbxCommand) ==
MBX_SHUTDOWN) {
- /* Unknow mailbox command compl */
+ /* Unknown mailbox command compl */
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
"(%d):0323 Unknown Mailbox command "
"x%x (x%x) Cmpl\n",
@@ -4062,7 +4062,7 @@ lpfc_sli4_read_fcoe_params(struct lpfc_hba *phba,
* addition, this routine gets the port vpd data.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - could not allocated memory.
**/
static int
@@ -11428,7 +11428,7 @@ lpfc_sli4_handle_received_buffer(struct lpfc_hba *phba,
* sequential.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* EIO - The mailbox failed to complete successfully.
* When this error occurs, the driver is not guaranteed
* to have any rpi regions posted to the device and
@@ -11466,7 +11466,7 @@ lpfc_sli4_post_all_rpi_hdrs(struct lpfc_hba *phba)
* maps up to 64 rpi context regions.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - No available memory
* EIO - The mailbox failed to complete successfully.
**/
@@ -11528,7 +11528,7 @@ lpfc_sli4_post_rpi_hdr(struct lpfc_hba *phba, struct lpfc_rpi_hdr *rpi_page)
* PAGE_SIZE modulo 64 rpi context headers.
*
* Returns
- * A nonzero rpi defined as rpi_base <= rpi < max_rpi if sucessful
+ * A nonzero rpi defined as rpi_base <= rpi < max_rpi if successful
* LPFC_RPI_ALLOC_ERROR if no rpis are available.
**/
int
diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h
index 512c2cc1a33..d310f49d077 100644
--- a/drivers/scsi/megaraid.h
+++ b/drivers/scsi/megaraid.h
@@ -381,7 +381,7 @@ typedef struct {
u8 battery_status; /*
* BIT 0: battery module missing
* BIT 1: VBAD
- * BIT 2: temprature high
+ * BIT 2: temperature high
* BIT 3: battery pack missing
* BIT 4,5:
* 00 - charge complete
diff --git a/drivers/scsi/megaraid/mbox_defs.h b/drivers/scsi/megaraid/mbox_defs.h
index b25b74764ec..ce2487a888e 100644
--- a/drivers/scsi/megaraid/mbox_defs.h
+++ b/drivers/scsi/megaraid/mbox_defs.h
@@ -497,7 +497,7 @@ typedef struct {
* @inserted_drive : channel:Id of inserted drive
* @battery_status : bit 0: battery module missing
* bit 1: VBAD
- * bit 2: temprature high
+ * bit 2: temperature high
* bit 3: battery pack missing
* bit 4,5:
* 00 - charge complete
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index fd181c2a8ae..7f977967b88 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -2709,7 +2709,7 @@ megaraid_reset_handler(struct scsi_cmnd *scp)
}
else {
con_log(CL_ANN, (KERN_NOTICE
- "megaraid mbox: reset sequence completed sucessfully\n"));
+ "megaraid mbox: reset sequence completed successfully\n"));
}
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 55ee014a7e0..efabea1a3ce 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -2987,7 +2987,7 @@ _scsih_normalize_sense(char *sense_buffer, struct sense_info *data)
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
/**
- * _scsih_scsi_ioc_info - translated non-succesfull SCSI_IO request
+ * _scsih_scsi_ioc_info - translated non-successfull SCSI_IO request
* @ioc: per adapter object
* @scmd: pointer to scsi command object
* @mpi_reply: reply mf payload returned from firmware
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index e3c482aa87b..a2d56982830 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -6495,7 +6495,7 @@ static void ncr_int_ma (struct ncb *np)
** we force a SIR_NEGO_PROTO interrupt (it is a hack that avoids
** bloat for such a should_not_happen situation).
** In all other situation, we reset the BUS.
- ** Are these assumptions reasonnable ? (Wait and see ...)
+ ** Are these assumptions reasonable ? (Wait and see ...)
*/
unexpected_phase:
dsp -= 8;
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 2be7d5b018d..2c98a6ee973 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -1419,7 +1419,7 @@ static irqreturn_t do_nsp32_isr(int irq, void *dev_id)
nsp32_msg(KERN_ERR, "Received unexpected BMCNTERR IRQ! ");
/*
* TODO: To be implemented improving bus master
- * transfer reliablity when BMCNTERR is occurred in
+ * transfer reliability when BMCNTERR is occurred in
* AutoSCSI phase described in specification.
*/
}
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index 4874dd62a62..34c6b896a91 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -3347,7 +3347,7 @@ static int pmcraid_chr_fasync(int fd, struct file *filep, int mode)
* @direction : data transfer direction
*
* Return value
- * 0 on sucess, non-zero error code on failure
+ * 0 on success, non-zero error code on failure
*/
static int pmcraid_build_passthrough_ioadls(
struct pmcraid_cmd *cmd,
@@ -3406,7 +3406,7 @@ static int pmcraid_build_passthrough_ioadls(
* @direction: data transfer direction
*
* Return value
- * 0 on sucess, non-zero error code on failure
+ * 0 on success, non-zero error code on failure
*/
static void pmcraid_release_passthrough_ioadls(
struct pmcraid_cmd *cmd,
@@ -3434,7 +3434,7 @@ static void pmcraid_release_passthrough_ioadls(
* @arg: pointer to pmcraid_passthrough_buffer user buffer
*
* Return value
- * 0 on sucess, non-zero error code on failure
+ * 0 on success, non-zero error code on failure
*/
static long pmcraid_ioctl_passthrough(
struct pmcraid_instance *pinstance,
diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h
index 3441b3f9082..2752b56cad5 100644
--- a/drivers/scsi/pmcraid.h
+++ b/drivers/scsi/pmcraid.h
@@ -771,11 +771,11 @@ static struct pmcraid_ioasc_error pmcraid_ioasc_error_table[] = {
{0x01180600, IOASC_LOG_LEVEL_MUST,
"Recovered Error, soft media error, sector reassignment suggested"},
{0x015D0000, IOASC_LOG_LEVEL_MUST,
- "Recovered Error, failure prediction thresold exceeded"},
+ "Recovered Error, failure prediction threshold exceeded"},
{0x015D9200, IOASC_LOG_LEVEL_MUST,
- "Recovered Error, soft Cache Card Battery error thresold"},
+ "Recovered Error, soft Cache Card Battery error threshold"},
{0x015D9200, IOASC_LOG_LEVEL_MUST,
- "Recovered Error, soft Cache Card Battery error thresold"},
+ "Recovered Error, soft Cache Card Battery error threshold"},
{0x02048000, IOASC_LOG_LEVEL_MUST,
"Not Ready, IOA Reset Required"},
{0x02408500, IOASC_LOG_LEVEL_MUST,
diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c
index 723fdecd91b..0fd6ae6911a 100644
--- a/drivers/scsi/scsi_netlink.c
+++ b/drivers/scsi/scsi_netlink.c
@@ -613,7 +613,7 @@ EXPORT_SYMBOL_GPL(scsi_nl_send_transport_msg);
* @data_buf: pointer to vendor unique data buffer
*
* Returns:
- * 0 on succesful return
+ * 0 on successful return
* otherwise, failing error code
*
* Notes:
diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index fd47cb1bee1..f27e52d963d 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -666,7 +666,7 @@ EXPORT_SYMBOL(sas_phy_add);
*
* Note:
* This function must only be called on a PHY that has not
- * sucessfully been added using sas_phy_add().
+ * successfully been added using sas_phy_add().
*/
void sas_phy_free(struct sas_phy *phy)
{
@@ -896,7 +896,7 @@ EXPORT_SYMBOL(sas_port_add);
*
* Note:
* This function must only be called on a PORT that has not
- * sucessfully been added using sas_port_add().
+ * successfully been added using sas_port_add().
*/
void sas_port_free(struct sas_port *port)
{
@@ -1476,7 +1476,7 @@ EXPORT_SYMBOL(sas_rphy_add);
*
* Note:
* This function must only be called on a remote
- * PHY that has not sucessfully been added using
+ * PHY that has not successfully been added using
* sas_rphy_add() (or has been sas_rphy_remove()'d)
*/
void sas_rphy_free(struct sas_rphy *rphy)
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 45374d66d26..2b38f6ad6e1 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -1864,7 +1864,7 @@ static pci_ers_result_t sym2_io_slot_dump(struct pci_dev *pdev)
*
* This routine is similar to sym_set_workarounds(), except
* that, at this point, we already know that the device was
- * succesfully intialized at least once before, and so most
+ * successfully intialized at least once before, and so most
* of the steps taken there are un-needed here.
*/
static void sym2_reset_workarounds(struct pci_dev *pdev)
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c
index 297deb817a5..a7bc8b7b09a 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -2692,7 +2692,7 @@ static void sym_int_ma (struct sym_hcb *np)
* we force a SIR_NEGO_PROTO interrupt (it is a hack that avoids
* bloat for such a should_not_happen situation).
* In all other situation, we reset the BUS.
- * Are these assumptions reasonnable ? (Wait and see ...)
+ * Are these assumptions reasonable ? (Wait and see ...)
*/
unexpected_phase:
dsp -= 8;
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.h b/drivers/scsi/sym53c8xx_2/sym_hipd.h
index 053e63c8682..5a80cbac3f9 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.h
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.h
@@ -54,7 +54,7 @@
*
* SYM_OPT_LIMIT_COMMAND_REORDERING
* When this option is set, the driver tries to limit tagged
- * command reordering to some reasonnable value.
+ * command reordering to some reasonable value.
* (set for Linux)
*/
#if 0
diff --git a/drivers/scsi/wd7000.c b/drivers/scsi/wd7000.c
index 093610bcfcc..2f6e9d8eaf7 100644
--- a/drivers/scsi/wd7000.c
+++ b/drivers/scsi/wd7000.c
@@ -161,7 +161,7 @@
*
* 2003/02/12 - Christoph Hellwig <hch@infradead.org>
*
- * Cleaned up host template defintion
+ * Cleaned up host template definition
* Removed now obsolete wd7000.h
*/
diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
index d71dfe39894..36ede02ceac 100644
--- a/drivers/serial/8250_pnp.c
+++ b/drivers/serial/8250_pnp.c
@@ -361,9 +361,9 @@ static const struct pnp_device_id pnp_dev_table[] = {
{ "LTS0001", 0 },
/* Rockwell's (PORALiNK) 33600 INT PNP */
{ "WCI0003", 0 },
- /* Unkown PnP modems */
+ /* Unknown PnP modems */
{ "PNPCXXX", UNKNOWN_DEV },
- /* More unkown PnP modems */
+ /* More unknown PnP modems */
{ "PNPDXXX", UNKNOWN_DEV },
{ "", 0 }
};
diff --git a/drivers/serial/pmac_zilog.h b/drivers/serial/pmac_zilog.h
index 570b0d925e8..f6e77f12acd 100644
--- a/drivers/serial/pmac_zilog.h
+++ b/drivers/serial/pmac_zilog.h
@@ -73,7 +73,7 @@ static inline struct uart_pmac_port *pmz_get_port_A(struct uart_pmac_port *uap)
}
/*
- * Register acessors. Note that we don't need to enforce a recovery
+ * Register accessors. Note that we don't need to enforce a recovery
* delay on PCI PowerMac hardware, it's dealt in HW by the MacIO chip,
* though if we try to use this driver on older machines, we might have
* to add it back
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
index 0c08f286a2e..46de564aaea 100644
--- a/drivers/serial/ucc_uart.c
+++ b/drivers/serial/ucc_uart.c
@@ -313,7 +313,7 @@ static void qe_uart_stop_tx(struct uart_port *port)
* This function will attempt to stuff of all the characters from the
* kernel's transmit buffer into TX BDs.
*
- * A return value of non-zero indicates that it sucessfully stuffed all
+ * A return value of non-zero indicates that it successfully stuffed all
* characters from the kernel buffer.
*
* A return value of zero indicates that there are still characters in the
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 815a65012cb..20d7322e2f7 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -41,7 +41,7 @@
* This supports acccess to SPI devices using normal userspace I/O calls.
* Note that while traditional UNIX/POSIX I/O semantics are half duplex,
* and often mask message boundaries, full SPI support requires full duplex
- * transfers. There are several kinds of of internal message boundaries to
+ * transfers. There are several kinds of internal message boundaries to
* handle chipselect management and other protocol options.
*
* SPI has a character major number assigned. We allocate minor numbers
diff --git a/drivers/staging/otus/80211core/pub_zfi.h b/drivers/staging/otus/80211core/pub_zfi.h
index a35bd5d41d2..60b7d1c56de 100644
--- a/drivers/staging/otus/80211core/pub_zfi.h
+++ b/drivers/staging/otus/80211core/pub_zfi.h
@@ -20,7 +20,7 @@
#include "../oal_dt.h"
/***** Section 1 : Tunable Parameters *****/
-/* The defintions in this section are tunabel parameters */
+/* The definitions in this section are tunabel parameters */
/* Maximum number of BSS that could be scaned */
#define ZM_MAX_BSS 128
diff --git a/drivers/staging/otus/zdcompat.h b/drivers/staging/otus/zdcompat.h
index 84ac43356b7..cdcaef54afc 100644
--- a/drivers/staging/otus/zdcompat.h
+++ b/drivers/staging/otus/zdcompat.h
@@ -17,7 +17,7 @@
/* Module Name : zdcompat.h */
/* */
/* Abstract */
-/* This module contains function defintion for compatibility. */
+/* This module contains function definition for compatibility. */
/* */
/* NOTES */
/* Platform dependent. */
diff --git a/drivers/staging/rtl8187se/r8180.h b/drivers/staging/rtl8187se/r8180.h
index 8216d7e96d6..35ed60be891 100644
--- a/drivers/staging/rtl8187se/r8180.h
+++ b/drivers/staging/rtl8187se/r8180.h
@@ -521,7 +521,7 @@ typedef struct r8180_priv
//u32 NumTxOkInPeriod; //YJ,del,080828
u8 TxPollingTimes;
- bool bApBufOurFrame;// TRUE if AP buffer our unicast data , we will keep eAwake untill receive data or timeout.
+ bool bApBufOurFrame;// TRUE if AP buffer our unicast data , we will keep eAwake until receive data or timeout.
u8 WaitBufDataBcnCount;
u8 WaitBufDataTimeOut;
diff --git a/drivers/staging/rtl8192su/r8192S_phyreg.h b/drivers/staging/rtl8192su/r8192S_phyreg.h
index 96c7cfa9254..acf644f430a 100644
--- a/drivers/staging/rtl8192su/r8192S_phyreg.h
+++ b/drivers/staging/rtl8192su/r8192S_phyreg.h
@@ -38,7 +38,7 @@
// 2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00
// 3. RF register 0x00-2E
// 4. Bit Mask for BB/RF register
-// 5. Other defintion for BB/RF R/W
+// 5. Other definition for BB/RF R/W
//
diff --git a/drivers/staging/wavelan/wavelan_cs.c b/drivers/staging/wavelan/wavelan_cs.c
index 33918fd5b23..10c702b5be4 100644
--- a/drivers/staging/wavelan/wavelan_cs.c
+++ b/drivers/staging/wavelan/wavelan_cs.c
@@ -3987,7 +3987,7 @@ wavelan_interrupt(int irq,
#endif
/* Prevent reentrancy. We need to do that because we may have
- * multiple interrupt handler running concurently.
+ * multiple interrupt handler running concurrently.
* It is safe because interrupts are disabled before aquiring
* the spinlock. */
spin_lock(&lp->spinlock);
diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c
index 40de151f278..e89304c7256 100644
--- a/drivers/telephony/ixj.c
+++ b/drivers/telephony/ixj.c
@@ -4190,7 +4190,7 @@ static void ixj_aec_start(IXJ *j, int level)
ixj_WriteDSPCommand(0x1224, j);
ixj_WriteDSPCommand(0xE014, j);
- ixj_WriteDSPCommand(0x0003, j); /* Lock threashold at 3dB */
+ ixj_WriteDSPCommand(0x0003, j); /* Lock threshold at 3dB */
ixj_WriteDSPCommand(0xE338, j); /* Set Echo Suppresser Attenuation to 0dB */
@@ -4235,7 +4235,7 @@ static void ixj_aec_start(IXJ *j, int level)
ixj_WriteDSPCommand(0x1224, j);
ixj_WriteDSPCommand(0xE014, j);
- ixj_WriteDSPCommand(0x0003, j); /* Lock threashold at 3dB */
+ ixj_WriteDSPCommand(0x0003, j); /* Lock threshold at 3dB */
ixj_WriteDSPCommand(0xE338, j); /* Set Echo Suppresser Attenuation to 0dB */
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index d171b563e94..bba4d3eabe0 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -1958,7 +1958,7 @@ static void uea_dispatch_cmv_e1(struct uea_softc *sc, struct intr_pkt *intr)
goto bad1;
/* FIXME : ADI930 reply wrong preambule (func = 2, sub = 2) to
- * the first MEMACESS cmv. Ignore it...
+ * the first MEMACCESS cmv. Ignore it...
*/
if (cmv->bFunction != dsc->function) {
if (UEA_CHIP_VERSION(sc) == ADI930
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 2473cf0c6b1..b4bd2411c66 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -1,5 +1,5 @@
/**
- * drivers/usb/class/usbtmc.c - USB Test & Measurment class driver
+ * drivers/usb/class/usbtmc.c - USB Test & Measurement class driver
*
* Copyright (C) 2007 Stefan Kopp, Gechingen, Germany
* Copyright (C) 2008 Novell, Inc.
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index da718e84d58..e80f1af438c 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1890,7 +1890,7 @@ static void cancel_async_set_config(struct usb_device *udev)
* routine gets around the normal restrictions by using a work thread to
* submit the change-config request.
*
- * Returns 0 if the request was succesfully queued, error code otherwise.
+ * Returns 0 if the request was successfully queued, error code otherwise.
* The caller has no way to know whether the queued request will eventually
* succeed.
*/
diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c
index 7953948bfe4..4e3657808b0 100644
--- a/drivers/usb/gadget/f_acm.c
+++ b/drivers/usb/gadget/f_acm.c
@@ -432,7 +432,7 @@ static void acm_disable(struct usb_function *f)
* @length: size of data
* Context: irqs blocked, acm->lock held, acm_notify_req non-null
*
- * Returns zero on sucess or a negative errno.
+ * Returns zero on success or a negative errno.
*
* See section 6.3.5 of the CDC 1.1 specification for information
* about the only notification we issue: SerialState change.
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 1937d8c7b43..adda1208a1e 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -1524,7 +1524,7 @@ static int pxa_udc_get_frame(struct usb_gadget *_gadget)
* pxa_udc_wakeup - Force udc device out of suspend
* @_gadget: usb gadget
*
- * Returns 0 if succesfull, error code otherwise
+ * Returns 0 if successfull, error code otherwise
*/
static int pxa_udc_wakeup(struct usb_gadget *_gadget)
{
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index f5f5601701c..d8f4aaa616f 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -210,7 +210,7 @@ static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr,
if (error) {
ehci_halt(ehci);
ehci_to_hcd(ehci)->state = HC_STATE_HALT;
- ehci_err(ehci, "force halt; handhake %p %08x %08x -> %d\n",
+ ehci_err(ehci, "force halt; handshake %p %08x %08x -> %d\n",
ptr, mask, done, error);
}
diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c
index 62a226b6167..00a29855d0c 100644
--- a/drivers/usb/host/fhci-sched.c
+++ b/drivers/usb/host/fhci-sched.c
@@ -627,7 +627,7 @@ irqreturn_t fhci_irq(struct usb_hcd *hcd)
/*
- * Process normal completions(error or sucess) and clean the schedule.
+ * Process normal completions(error or success) and clean the schedule.
*
* This is the main path for handing urbs back to drivers. The only other patth
* is process_del_list(),which unlinks URBs by scanning EDs,instead of scanning
diff --git a/drivers/usb/wusbcore/crypto.c b/drivers/usb/wusbcore/crypto.c
index 9ec7fd5da48..9579cf4c38b 100644
--- a/drivers/usb/wusbcore/crypto.c
+++ b/drivers/usb/wusbcore/crypto.c
@@ -111,7 +111,7 @@ struct aes_ccm_b1 {
*
* CCM uses Ax blocks to generate a keystream with which the MIC and
* the message's payload are encoded. A0 always encrypts/decrypts the
- * MIC. Ax (x>0) are used for the sucesive payload blocks.
+ * MIC. Ax (x>0) are used for the successive payload blocks.
*
* The x is the counter, and is increased for each block.
*/
diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c
index 613a5fc490d..489b47833e2 100644
--- a/drivers/usb/wusbcore/wa-xfer.c
+++ b/drivers/usb/wusbcore/wa-xfer.c
@@ -558,7 +558,7 @@ static void wa_seg_dto_cb(struct urb *urb)
/*
* Callback for the segment request
*
- * If succesful transition state (unless already transitioned or
+ * If successful transition state (unless already transitioned or
* outbound transfer); otherwise, take a note of the error, mark this
* segment done and try completion.
*
@@ -1364,7 +1364,7 @@ segment_aborted:
/*
* Callback for the IN data phase
*
- * If succesful transition state; otherwise, take a note of the
+ * If successful transition state; otherwise, take a note of the
* error, mark this segment done and try completion.
*
* Note we don't access until we are sure that the transfer hasn't
diff --git a/drivers/uwb/i1480/dfu/usb.c b/drivers/uwb/i1480/dfu/usb.c
index c7080d49731..0bb665a0c02 100644
--- a/drivers/uwb/i1480/dfu/usb.c
+++ b/drivers/uwb/i1480/dfu/usb.c
@@ -229,7 +229,7 @@ void i1480_usb_neep_cb(struct urb *urb)
* will verify it.
*
* Set i1480->evt_result with the result of getting the event or its
- * size (if succesful).
+ * size (if successful).
*
* Delivers the data directly to i1480->evt_buf
*/
diff --git a/drivers/uwb/neh.c b/drivers/uwb/neh.c
index 0af8916d9be..78510a1f410 100644
--- a/drivers/uwb/neh.c
+++ b/drivers/uwb/neh.c
@@ -150,7 +150,7 @@ void uwb_rc_neh_put(struct uwb_rc_neh *neh)
* 0xff is invalid, so they must not be used. Initialization
* fills up those two in the bitmap so they are not allocated.
*
- * We spread the allocation around to reduce the posiblity of two
+ * We spread the allocation around to reduce the possibility of two
* consecutive opened @neh's getting the same context ID assigned (to
* avoid surprises with late events that timed out long time ago). So
* first we search from where @rc->ctx_roll is, if not found, we
diff --git a/drivers/uwb/wlp/txrx.c b/drivers/uwb/wlp/txrx.c
index 86a853b8411..7350ed6909f 100644
--- a/drivers/uwb/wlp/txrx.c
+++ b/drivers/uwb/wlp/txrx.c
@@ -282,7 +282,7 @@ EXPORT_SYMBOL_GPL(wlp_receive_frame);
* and transmission will be done by the calling function.
* @dst: On return this will contain the device address to which the
* frame is destined.
- * @returns: 0 on success no tx : WLP header sucessfully applied to skb buffer,
+ * @returns: 0 on success no tx : WLP header successfully applied to skb buffer,
* calling function can proceed with tx
* 1 on success with tx : WLP will take over transmission of this
* frame
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index d5e801076d3..3d886c6902f 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -964,7 +964,7 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
if (sinfo->atmel_lcdfb_power_control)
sinfo->atmel_lcdfb_power_control(1);
- dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %lu\n",
+ dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %d\n",
info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base);
return 0;
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index 913b4a47ae5..1ddeb4c3476 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -3276,7 +3276,7 @@ static void __devinit aty_init_lcd(struct atyfb_par *par, u32 bios_base)
txtformat = "24 bit interface";
break;
default:
- txtformat = "unkown format";
+ txtformat = "unknown format";
}
} else {
switch (format & 7) {
@@ -3299,7 +3299,7 @@ static void __devinit aty_init_lcd(struct atyfb_par *par, u32 bios_base)
txtformat = "262144 colours (FDPI-2 mode)";
break;
default:
- txtformat = "unkown format";
+ txtformat = "unknown format";
}
}
PRINTKI("%s%s %s monitor detected: %s\n",
diff --git a/drivers/video/backlight/atmel-pwm-bl.c b/drivers/video/backlight/atmel-pwm-bl.c
index 505c0823a10..2cf7ba52f67 100644
--- a/drivers/video/backlight/atmel-pwm-bl.c
+++ b/drivers/video/backlight/atmel-pwm-bl.c
@@ -158,7 +158,7 @@ static int atmel_pwm_bl_probe(struct platform_device *pdev)
goto err_free_pwm;
}
- /* Turn display off by defatult. */
+ /* Turn display off by default. */
retval = gpio_direction_output(pwmbl->gpio_on,
0 ^ pdata->on_active_low);
if (retval)
diff --git a/drivers/video/backlight/tosa_lcd.c b/drivers/video/backlight/tosa_lcd.c
index 50ec17dfc51..fa32b94a454 100644
--- a/drivers/video/backlight/tosa_lcd.c
+++ b/drivers/video/backlight/tosa_lcd.c
@@ -177,7 +177,7 @@ static int __devinit tosa_lcd_probe(struct spi_device *spi)
if (!data)
return -ENOMEM;
- data->is_vga = true; /* defaut to VGA mode */
+ data->is_vga = true; /* default to VGA mode */
/*
* bits_per_word cannot be configured in platform data
diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c
index 857b3668b3b..6468a297e34 100644
--- a/drivers/video/console/sticore.c
+++ b/drivers/video/console/sticore.c
@@ -436,7 +436,7 @@ sti_init_glob_cfg(struct sti_struct *sti,
(offs < PCI_BASE_ADDRESS_0 ||
offs > PCI_BASE_ADDRESS_5)) {
printk (KERN_WARNING
- "STI pci region maping for region %d (%02x) can't be mapped\n",
+ "STI pci region mapping for region %d (%02x) can't be mapped\n",
i,sti->rm_entry[i]);
continue;
}
diff --git a/drivers/video/fb_defio.c b/drivers/video/fb_defio.c
index c27ab1ed960..e59c0832088 100644
--- a/drivers/video/fb_defio.c
+++ b/drivers/video/fb_defio.c
@@ -71,7 +71,7 @@ int fb_deferred_io_fsync(struct file *file, struct dentry *dentry, int datasync)
{
struct fb_info *info = file->private_data;
- /* Skip if deferred io is complied-in but disabled on this fbdev */
+ /* Skip if deferred io is compiled-in but disabled on this fbdev */
if (!info->fbdefio)
return 0;
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index f67db426837..695fa013fe7 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -701,7 +701,7 @@ static int gbefb_set_par(struct fb_info *info)
blocks of 512x128, 256x128 or 128x128 pixels, respectively for 8bit,
16bit and 32 bit modes (64 kB). They cover the screen with partial
tiles on the right and/or bottom of the screen if needed.
- For exemple in 640x480 8 bit mode the mapping is:
+ For example in 640x480 8 bit mode the mapping is:
<-------- 640 ----->
<---- 512 ----><128|384 offscreen>
diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/omap/lcd_ams_delta.c
index 3d5277252ca..b3973ebd1b0 100644
--- a/drivers/video/omap/lcd_ams_delta.c
+++ b/drivers/video/omap/lcd_ams_delta.c
@@ -123,12 +123,12 @@ struct platform_driver ams_delta_panel_driver = {
},
};
-static int ams_delta_panel_drv_init(void)
+static int __init ams_delta_panel_drv_init(void)
{
return platform_driver_register(&ams_delta_panel_driver);
}
-static void ams_delta_panel_drv_cleanup(void)
+static void __exit ams_delta_panel_drv_cleanup(void)
{
platform_driver_unregister(&ams_delta_panel_driver);
}
diff --git a/drivers/video/omap/lcd_mipid.c b/drivers/video/omap/lcd_mipid.c
index 2162eb09e0f..8f3e2b4bb4f 100644
--- a/drivers/video/omap/lcd_mipid.c
+++ b/drivers/video/omap/lcd_mipid.c
@@ -607,7 +607,7 @@ static struct spi_driver mipid_spi_driver = {
.remove = __devexit_p(mipid_spi_remove),
};
-static int mipid_drv_init(void)
+static int __init mipid_drv_init(void)
{
spi_register_driver(&mipid_spi_driver);
@@ -615,7 +615,7 @@ static int mipid_drv_init(void)
}
module_init(mipid_drv_init);
-static void mipid_drv_cleanup(void)
+static void __exit mipid_drv_cleanup(void)
{
spi_unregister_driver(&mipid_spi_driver);
}
diff --git a/drivers/video/sgivwfb.c b/drivers/video/sgivwfb.c
index bba53714a7b..f86012239bf 100644
--- a/drivers/video/sgivwfb.c
+++ b/drivers/video/sgivwfb.c
@@ -260,13 +260,13 @@ static int sgivwfb_check_var(struct fb_var_screeninfo *var,
var->grayscale = 0; /* No grayscale for now */
/* determine valid resolution and timing */
- for (min_mode = 0; min_mode < DBE_VT_SIZE; min_mode++) {
+ for (min_mode = 0; min_mode < ARRAY_SIZE(dbeVTimings); min_mode++) {
if (dbeVTimings[min_mode].width >= var->xres &&
dbeVTimings[min_mode].height >= var->yres)
break;
}
- if (min_mode == DBE_VT_SIZE)
+ if (min_mode == ARRAY_SIZE(dbeVTimings))
return -EINVAL; /* Resolution to high */
/* XXX FIXME - should try to pick best refresh rate */
diff --git a/drivers/video/stifb.c b/drivers/video/stifb.c
index 6120f0c526f..876648e15e9 100644
--- a/drivers/video/stifb.c
+++ b/drivers/video/stifb.c
@@ -756,9 +756,9 @@ hyperResetPlanes(struct stifb_info *fb, int enable)
if (fb->info.var.bits_per_pixel == 32)
controlPlaneReg = 0x04000F00;
else
- controlPlaneReg = 0x00000F00; /* 0x00000800 should be enought, but lets clear all 4 bits */
+ controlPlaneReg = 0x00000F00; /* 0x00000800 should be enough, but lets clear all 4 bits */
else
- controlPlaneReg = 0x00000F00; /* 0x00000100 should be enought, but lets clear all 4 bits */
+ controlPlaneReg = 0x00000F00; /* 0x00000100 should be enough, but lets clear all 4 bits */
switch (enable) {
case ENABLE:
diff --git a/drivers/video/tdfxfb.c b/drivers/video/tdfxfb.c
index ff43c888502..98054839004 100644
--- a/drivers/video/tdfxfb.c
+++ b/drivers/video/tdfxfb.c
@@ -52,7 +52,7 @@
*
* 0.1.3 (released 1999-11-02) added Attila's panning support, code
* reorg, hwcursor address page size alignment
- * (for mmaping both frame buffer and regs),
+ * (for mmapping both frame buffer and regs),
* and my changes to get rid of hardcoded
* VGA i/o register locations (uses PCI
* configuration info now)
diff --git a/drivers/video/via/dvi.c b/drivers/video/via/dvi.c
index c5c32b6b6e6..67b36932212 100644
--- a/drivers/video/via/dvi.c
+++ b/drivers/video/via/dvi.c
@@ -467,7 +467,7 @@ static int dvi_get_panel_size_from_DDCv1(void)
default:
viaparinfo->tmds_setting_info->dvi_panel_size =
VIA_RES_1024X768;
- DEBUG_MSG(KERN_INFO "Unknow panel size max resolution = %d !\
+ DEBUG_MSG(KERN_INFO "Unknown panel size max resolution = %d !\
set default panel size.\n", max_h);
break;
}
@@ -534,7 +534,7 @@ static int dvi_get_panel_size_from_DDCv2(void)
default:
viaparinfo->tmds_setting_info->dvi_panel_size =
VIA_RES_1024X768;
- DEBUG_MSG(KERN_INFO "Unknow panel size max resolution = %d!\
+ DEBUG_MSG(KERN_INFO "Unknown panel size max resolution = %d!\
set default panel size.\n", HSize);
break;
}
diff --git a/drivers/video/vt8623fb.c b/drivers/video/vt8623fb.c
index 3df17dc8c3d..65ccd215d49 100644
--- a/drivers/video/vt8623fb.c
+++ b/drivers/video/vt8623fb.c
@@ -446,7 +446,7 @@ static int vt8623fb_set_par(struct fb_info *info)
svga_wseq_mask(0x1E, 0xF0, 0xF0); // DI/DVP bus
svga_wseq_mask(0x2A, 0x0F, 0x0F); // DI/DVP bus
- svga_wseq_mask(0x16, 0x08, 0xBF); // FIFO read treshold
+ svga_wseq_mask(0x16, 0x08, 0xBF); // FIFO read threshold
vga_wseq(NULL, 0x17, 0x1F); // FIFO depth
vga_wseq(NULL, 0x18, 0x4E);
svga_wseq_mask(0x1A, 0x08, 0x08); // enable MMIO ?
diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c
index 381026c0bd7..923cc68dba2 100644
--- a/drivers/watchdog/coh901327_wdt.c
+++ b/drivers/watchdog/coh901327_wdt.c
@@ -508,7 +508,7 @@ void coh901327_watchdog_reset(void)
* deactivating the watchdog before it is shut down by it.
*
* NOTE: on future versions of the watchdog, this restriction is
- * gone: the watchdog will be reloaded with a defaul value (1 min)
+ * gone: the watchdog will be reloaded with a default value (1 min)
* instead of last value, and you can conveniently set the watchdog
* timeout to 10ms (value = 1) without any problems.
*/
diff --git a/drivers/watchdog/machzwd.c b/drivers/watchdog/machzwd.c
index b6b3f59ab44..47d719717a3 100644
--- a/drivers/watchdog/machzwd.c
+++ b/drivers/watchdog/machzwd.c
@@ -21,7 +21,7 @@
* wd#1 - 2 seconds;
* wd#2 - 7.2 ms;
* After the expiration of wd#1, it can generate a NMI, SCI, SMI, or
- * a system RESET and it starts wd#2 that unconditionaly will RESET
+ * a system RESET and it starts wd#2 that unconditionally will RESET
* the system when the counter reaches zero.
*
* 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
diff --git a/drivers/watchdog/sb_wdog.c b/drivers/watchdog/sb_wdog.c
index 9748eed7319..c8eadd47817 100644
--- a/drivers/watchdog/sb_wdog.c
+++ b/drivers/watchdog/sb_wdog.c
@@ -1,7 +1,7 @@
/*
* Watchdog driver for SiByte SB1 SoCs
*
- * Copyright (C) 2007 OnStor, Inc. * Andrew Sharp <andy.sharp@onstor.com>
+ * Copyright (C) 2007 OnStor, Inc. * Andrew Sharp <andy.sharp@lsi.com>
*
* This driver is intended to make the second of two hardware watchdogs
* on the Sibyte 12XX and 11XX SoCs available to the user. There are two
@@ -326,7 +326,7 @@ static void __exit sbwdog_exit(void)
module_init(sbwdog_init);
module_exit(sbwdog_exit);
-MODULE_AUTHOR("Andrew Sharp <andy.sharp@onstor.com>");
+MODULE_AUTHOR("Andrew Sharp <andy.sharp@lsi.com>");
MODULE_DESCRIPTION("SiByte Watchdog");
module_param(timeout, ulong, 0);
diff --git a/drivers/watchdog/wdrtas.c b/drivers/watchdog/wdrtas.c
index 3bde56bce63..5bfb1f2c531 100644
--- a/drivers/watchdog/wdrtas.c
+++ b/drivers/watchdog/wdrtas.c
@@ -542,7 +542,7 @@ static struct notifier_block wdrtas_notifier = {
/**
* wdrtas_get_tokens - reads in RTAS tokens
*
- * returns 0 on succes, <0 on failure
+ * returns 0 on success, <0 on failure
*
* wdrtas_get_tokens reads in the tokens for the RTAS calls used in
* this watchdog driver. It tolerates, if "get-sensor-state" and
@@ -598,7 +598,7 @@ static void wdrtas_unregister_devs(void)
/**
* wdrtas_register_devs - registers the misc dev handlers
*
- * returns 0 on succes, <0 on failure
+ * returns 0 on success, <0 on failure
*
* wdrtas_register_devs registers the watchdog and temperature watchdog
* misc devs
@@ -630,7 +630,7 @@ static int wdrtas_register_devs(void)
/**
* wdrtas_init - init function of the watchdog driver
*
- * returns 0 on succes, <0 on failure
+ * returns 0 on success, <0 on failure
*
* registers the file handlers and the reboot notifier
*/