diff options
Diffstat (limited to 'drivers/pci/pci.c')
| -rw-r--r-- | drivers/pci/pci.c | 123 |
1 files changed, 102 insertions, 21 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index a544997399b..5a14b73cf3a 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -490,6 +490,47 @@ static void pci_restore_pcie_state(struct pci_dev *dev) kfree(save_state); } + +static int pci_save_pcix_state(struct pci_dev *dev) +{ + int pos, i = 0; + struct pci_cap_saved_state *save_state; + u16 *cap; + + pos = pci_find_capability(dev, PCI_CAP_ID_PCIX); + if (pos <= 0) + return 0; + + save_state = kzalloc(sizeof(*save_state) + sizeof(u16), GFP_KERNEL); + if (!save_state) { + dev_err(&dev->dev, "Out of memory in pci_save_pcie_state\n"); + return -ENOMEM; + } + cap = (u16 *)&save_state->data[0]; + + pci_read_config_word(dev, pos + PCI_X_CMD, &cap[i++]); + pci_add_saved_cap(dev, save_state); + return 0; +} + +static void pci_restore_pcix_state(struct pci_dev *dev) +{ + int i = 0, pos; + struct pci_cap_saved_state *save_state; + u16 *cap; + + save_state = pci_find_saved_cap(dev, PCI_CAP_ID_PCIX); + pos = pci_find_capability(dev, PCI_CAP_ID_PCIX); + if (!save_state || pos <= 0) + return; + cap = (u16 *)&save_state->data[0]; + + pci_write_config_word(dev, pos + PCI_X_CMD, cap[i++]); + pci_remove_saved_cap(save_state); + kfree(save_state); +} + + /** * pci_save_state - save the PCI configuration space of a device before suspending * @dev: - PCI device that we're dealing with @@ -507,6 +548,8 @@ pci_save_state(struct pci_dev *dev) return i; if ((i = pci_save_pcie_state(dev)) != 0) return i; + if ((i = pci_save_pcix_state(dev)) != 0) + return i; return 0; } @@ -538,6 +581,7 @@ pci_restore_state(struct pci_dev *dev) dev->saved_config_space[i]); } } + pci_restore_pcix_state(dev); pci_restore_msi_state(dev); pci_restore_msix_state(dev); return 0; @@ -568,30 +612,51 @@ pci_enable_device_bars(struct pci_dev *dev, int bars) } /** - * pci_enable_device - Initialize device before it's used by a driver. + * __pci_enable_device - Initialize device before it's used by a driver. * @dev: PCI device to be initialized * * Initialize device before it's used by a driver. Ask low-level code * to enable I/O and memory. Wake up the device if it was suspended. * Beware, this function can fail. + * + * Note this function is a backend and is not supposed to be called by + * normal code, use pci_enable_device() instead. */ int -pci_enable_device(struct pci_dev *dev) +__pci_enable_device(struct pci_dev *dev) { int err; - if (dev->is_enabled) - return 0; - err = pci_enable_device_bars(dev, (1 << PCI_NUM_RESOURCES) - 1); if (err) return err; pci_fixup_device(pci_fixup_enable, dev); - dev->is_enabled = 1; return 0; } /** + * pci_enable_device - Initialize device before it's used by a driver. + * @dev: PCI device to be initialized + * + * Initialize device before it's used by a driver. Ask low-level code + * to enable I/O and memory. Wake up the device if it was suspended. + * Beware, this function can fail. + * + * Note we don't actually enable the device many times if we call + * this function repeatedly (we just increment the count). + */ +int pci_enable_device(struct pci_dev *dev) +{ + int result; + if (atomic_add_return(1, &dev->enable_cnt) > 1) + return 0; /* already enabled */ + result = __pci_enable_device(dev); + if (result < 0) + atomic_dec(&dev->enable_cnt); + return result; +} + +/** * pcibios_disable_device - disable arch specific PCI resources for device dev * @dev: the PCI device to disable * @@ -607,12 +672,18 @@ void __attribute__ ((weak)) pcibios_disable_device (struct pci_dev *dev) {} * * Signal to the system that the PCI device is not in use by the system * anymore. This only involves disabling PCI bus-mastering, if active. + * + * Note we don't actually disable the device until all callers of + * pci_device_enable() have called pci_device_disable(). */ void pci_disable_device(struct pci_dev *dev) { u16 pci_command; + if (atomic_sub_return(1, &dev->enable_cnt) != 0) + return; + if (dev->msi_enabled) disable_msi_mode(dev, pci_find_capability(dev, PCI_CAP_ID_MSI), PCI_CAP_ID_MSI); @@ -628,7 +699,6 @@ pci_disable_device(struct pci_dev *dev) dev->is_busmaster = 0; pcibios_disable_device(dev); - dev->is_enabled = 0; } /** @@ -831,22 +901,38 @@ pci_set_master(struct pci_dev *dev) pcibios_set_master(dev); } -#ifndef HAVE_ARCH_PCI_MWI +#ifdef PCI_DISABLE_MWI +int pci_set_mwi(struct pci_dev *dev) +{ + return 0; +} + +void pci_clear_mwi(struct pci_dev *dev) +{ +} + +#else + +#ifndef PCI_CACHE_LINE_BYTES +#define PCI_CACHE_LINE_BYTES L1_CACHE_BYTES +#endif + /* This can be overridden by arch code. */ -u8 pci_cache_line_size = L1_CACHE_BYTES >> 2; +/* Don't forget this is measured in 32-bit words, not bytes */ +u8 pci_cache_line_size = PCI_CACHE_LINE_BYTES / 4; /** - * pci_generic_prep_mwi - helper function for pci_set_mwi - * @dev: the PCI device for which MWI is enabled + * pci_set_cacheline_size - ensure the CACHE_LINE_SIZE register is programmed + * @dev: the PCI device for which MWI is to be enabled * - * Helper function for generic implementation of pcibios_prep_mwi - * function. Originally copied from drivers/net/acenic.c. + * Helper function for pci_set_mwi. + * Originally copied from drivers/net/acenic.c. * Copyright 1998-2001 by Jes Sorensen, <jes@trained-monkey.org>. * * RETURNS: An appropriate -ERRNO error value on error, or zero for success. */ static int -pci_generic_prep_mwi(struct pci_dev *dev) +pci_set_cacheline_size(struct pci_dev *dev) { u8 cacheline_size; @@ -872,7 +958,6 @@ pci_generic_prep_mwi(struct pci_dev *dev) return -EINVAL; } -#endif /* !HAVE_ARCH_PCI_MWI */ /** * pci_set_mwi - enables memory-write-invalidate PCI transaction @@ -890,12 +975,7 @@ pci_set_mwi(struct pci_dev *dev) int rc; u16 cmd; -#ifdef HAVE_ARCH_PCI_MWI - rc = pcibios_prep_mwi(dev); -#else - rc = pci_generic_prep_mwi(dev); -#endif - + rc = pci_set_cacheline_size(dev); if (rc) return rc; @@ -926,6 +1006,7 @@ pci_clear_mwi(struct pci_dev *dev) pci_write_config_word(dev, PCI_COMMAND, cmd); } } +#endif /* ! PCI_DISABLE_MWI */ /** * pci_intx - enables/disables PCI INTx for device dev |