diff options
Diffstat (limited to 'drivers/net/qla3xxx.h')
| -rwxr-xr-x | drivers/net/qla3xxx.h | 33 |
1 files changed, 31 insertions, 2 deletions
diff --git a/drivers/net/qla3xxx.h b/drivers/net/qla3xxx.h index 0203f88f054..4a832c46c27 100755 --- a/drivers/net/qla3xxx.h +++ b/drivers/net/qla3xxx.h @@ -293,6 +293,16 @@ struct net_rsp_iocb { #define MII_SCAN_REGISTER 0x00000001 +#define PHY_ID_0_REG 2 +#define PHY_ID_1_REG 3 + +#define PHY_OUI_1_MASK 0xfc00 +#define PHY_MODEL_MASK 0x03f0 + +/* Address for the Agere Phy */ +#define MII_AGERE_ADDR_1 0x00001000 +#define MII_AGERE_ADDR_2 0x00001100 + /* 32-bit ispControlStatus */ enum { ISP_CONTROL_NP_MASK = 0x0003, @@ -789,6 +799,7 @@ enum { PHY_CTRL_LOOPBACK = 0x4000, PETBI_CONTROL_REG = 0x00, + PETBI_CTRL_ALL_PARAMS = 0x7140, PETBI_CTRL_SOFT_RESET = 0x8000, PETBI_CTRL_AUTO_NEG = 0x1000, PETBI_CTRL_RESTART_NEG = 0x0200, @@ -811,6 +822,23 @@ enum { PETBI_EXPANSION_REG = 0x06, PETBI_EXP_PAGE_RX = 0x0002, + PHY_GIG_CONTROL = 9, + PHY_GIG_ENABLE_MAN = 0x1000, /* Enable Master/Slave Manual Config*/ + PHY_GIG_SET_MASTER = 0x0800, /* Set Master (slave if clear)*/ + PHY_GIG_ALL_PARAMS = 0x0300, + PHY_GIG_ADV_1000F = 0x0200, + PHY_GIG_ADV_1000H = 0x0100, + + PHY_NEG_ADVER = 4, + PHY_NEG_ALL_PARAMS = 0x0fe0, + PHY_NEG_ASY_PAUSE = 0x0800, + PHY_NEG_SYM_PAUSE = 0x0400, + PHY_NEG_ADV_SPEED = 0x01e0, + PHY_NEG_ADV_100F = 0x0100, + PHY_NEG_ADV_100H = 0x0080, + PHY_NEG_ADV_10F = 0x0040, + PHY_NEG_ADV_10H = 0x0020, + PETBI_TBI_CTRL = 0x11, PETBI_TBI_RESET = 0x8000, PETBI_TBI_AUTO_SENSE = 0x0100, @@ -826,8 +854,7 @@ enum { PHY_AUX_RESET_STICK = 0x0002, PHY_NEG_PAUSE = 0x0400, PHY_CTRL_SOFT_RESET = 0x8000, - PHY_NEG_ADVER = 4, - PHY_NEG_ADV_SPEED = 0x01e0, + PHY_CTRL_AUTO_NEG = 0x1000, PHY_CTRL_RESTART_NEG = 0x0200, }; enum { @@ -892,6 +919,7 @@ enum {EEPROM_SIZE = FM93C86A_SIZE_16, u16 pauseThreshold_mac; u16 resumeThreshold_mac; u16 portConfiguration; +#define PORT_CONFIG_DEFAULT 0xf700 #define PORT_CONFIG_AUTO_NEG_ENABLED 0x8000 #define PORT_CONFIG_SYM_PAUSE_ENABLED 0x4000 #define PORT_CONFIG_FULL_DUPLEX_ENABLED 0x2000 @@ -1259,6 +1287,7 @@ struct ql3_adapter { struct delayed_work tx_timeout_work; u32 max_frame_size; u32 device_id; + u16 phyType; }; #endif /* _QLA3XXX_H_ */ |