diff options
Diffstat (limited to 'drivers/mmc/mmc.c')
| -rw-r--r-- | drivers/mmc/mmc.c | 17 |
1 files changed, 13 insertions, 4 deletions
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index da528390acf..eb41391e06e 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -679,7 +679,15 @@ static void mmc_idle_cards(struct mmc_host *host) } /* - * Apply power to the MMC stack. + * Apply power to the MMC stack. This is a two-stage process. + * First, we enable power to the card without the clock running. + * We then wait a bit for the power to stabilise. Finally, + * enable the bus drivers and clock to the card. + * + * We must _NOT_ enable the clock prior to power stablising. + * + * If a host does all the power sequencing itself, ignore the + * initial MMC_POWER_UP stage. */ static void mmc_power_up(struct mmc_host *host) { @@ -816,7 +824,7 @@ static void mmc_discover_cards(struct mmc_host *host) cmd.opcode = SD_SEND_RELATIVE_ADDR; cmd.arg = 0; - cmd.flags = MMC_RSP_R1; + cmd.flags = MMC_RSP_R6; err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES); if (err != MMC_ERR_NONE) @@ -932,8 +940,9 @@ static void mmc_read_scrs(struct mmc_host *host) sg_init_one(&sg, (u8*)card->raw_scr, 8); - err = mmc_wait_for_req(host, &mrq); - if (err != MMC_ERR_NONE) { + mmc_wait_for_req(host, &mrq); + + if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) { mmc_card_set_dead(card); continue; } |