summaryrefslogtreecommitdiffstats
path: root/drivers/media/dvb/dvb-usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/dvb/dvb-usb')
-rw-r--r--drivers/media/dvb/dvb-usb/Kconfig6
-rw-r--r--drivers/media/dvb/dvb-usb/Makefile3
-rw-r--r--drivers/media/dvb/dvb-usb/dvb-usb-ids.h2
-rw-r--r--drivers/media/dvb/dvb-usb/friio-fe.c483
-rw-r--r--drivers/media/dvb/dvb-usb/friio.c525
-rw-r--r--drivers/media/dvb/dvb-usb/friio.h99
6 files changed, 1118 insertions, 0 deletions
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index c5ec9a5f3b3..0e4b97fba38 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -316,3 +316,9 @@ config DVB_USB_CE6230
select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
help
Say Y here to support the Intel CE6230 DVB-T USB2.0 receiver
+
+config DVB_USB_FRIIO
+ tristate "Friio ISDB-T USB2.0 Receiver support"
+ depends on DVB_USB
+ help
+ Say Y here to support the Japanese DTV receiver Friio.
diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile
index f92734ed777..85b83a43d55 100644
--- a/drivers/media/dvb/dvb-usb/Makefile
+++ b/drivers/media/dvb/dvb-usb/Makefile
@@ -79,6 +79,9 @@ obj-$(CONFIG_DVB_USB_CINERGY_T2) += dvb-usb-cinergyT2.o
dvb-usb-ce6230-objs = ce6230.o
obj-$(CONFIG_DVB_USB_CE6230) += dvb-usb-ce6230.o
+dvb-usb-friio-objs = friio.o friio-fe.o
+obj-$(CONFIG_DVB_USB_FRIIO) += dvb-usb-friio.o
+
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
# due to tuner-xc3028
EXTRA_CFLAGS += -Idrivers/media/common/tuners
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 2d51e3c2820..a548c14c194 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -60,6 +60,7 @@
#define USB_VID_YUAN 0x1164
#define USB_VID_XTENSIONS 0x1ae7
#define USB_VID_HUMAX_COEX 0x10b9
+#define USB_VID_774 0x7a69
/* Product IDs */
#define USB_PID_ADSTECH_USB2_COLD 0xa333
@@ -274,5 +275,6 @@
#define USB_PID_ELGATO_EYETV_DTT_Dlx 0x0020
#define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_COLD 0x5000
#define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_WARM 0x5001
+#define USB_PID_FRIIO_WHITE 0x0001
#endif
diff --git a/drivers/media/dvb/dvb-usb/friio-fe.c b/drivers/media/dvb/dvb-usb/friio-fe.c
new file mode 100644
index 00000000000..c4dfe25cf60
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/friio-fe.c
@@ -0,0 +1,483 @@
+/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver.
+ *
+ * Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
+ *
+ * This module is based off the the gl861 and vp702x modules.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+
+#include "friio.h"
+
+struct jdvbt90502_state {
+ struct i2c_adapter *i2c;
+ struct dvb_frontend frontend;
+ struct jdvbt90502_config config;
+};
+
+/* NOTE: TC90502 has 16bit register-address? */
+/* register 0x0100 is used for reading PLL status, so reg is u16 here */
+static int jdvbt90502_reg_read(struct jdvbt90502_state *state,
+ const u16 reg, u8 *buf, const size_t count)
+{
+ int ret;
+ u8 wbuf[3];
+ struct i2c_msg msg[2];
+
+ wbuf[0] = reg & 0xFF;
+ wbuf[1] = 0;
+ wbuf[2] = reg >> 8;
+
+ msg[0].addr = state->config.demod_address;
+ msg[0].flags = 0;
+ msg[0].buf = wbuf;
+ msg[0].len = sizeof(wbuf);
+
+ msg[1].addr = msg[0].addr;
+ msg[1].flags = I2C_M_RD;
+ msg[1].buf = buf;
+ msg[1].len = count;
+
+ ret = i2c_transfer(state->i2c, msg, 2);
+ if (ret != 2) {
+ deb_fe(" reg read failed.\n");
+ return -EREMOTEIO;
+ }
+ return 0;
+}
+
+/* currently 16bit register-address is not used, so reg is u8 here */
+static int jdvbt90502_single_reg_write(struct jdvbt90502_state *state,
+ const u8 reg, const u8 val)
+{
+ struct i2c_msg msg;
+ u8 wbuf[2];
+
+ wbuf[0] = reg;
+ wbuf[1] = val;
+
+ msg.addr = state->config.demod_address;
+ msg.flags = 0;
+ msg.buf = wbuf;
+ msg.len = sizeof(wbuf);
+
+ if (i2c_transfer(state->i2c, &msg, 1) != 1) {
+ deb_fe(" reg write failed.");
+ return -EREMOTEIO;
+ }
+ return 0;
+}
+
+static int _jdvbt90502_write(struct dvb_frontend *fe, u8 *buf, int len)
+{
+ struct jdvbt90502_state *state = fe->demodulator_priv;
+ int err, i;
+ for (i = 0; i < len - 1; i++) {
+ err = jdvbt90502_single_reg_write(state,
+ buf[0] + i, buf[i + 1]);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+/* read pll status byte via the demodulator's I2C register */
+/* note: Win box reads it by 8B block at the I2C addr 0x30 from reg:0x80 */
+static int jdvbt90502_pll_read(struct jdvbt90502_state *state, u8 *result)
+{
+ int ret;
+
+ /* +1 for reading */
+ u8 pll_addr_byte = (state->config.pll_address << 1) + 1;
+
+ *result = 0;
+
+ ret = jdvbt90502_single_reg_write(state, JDVBT90502_2ND_I2C_REG,
+ pll_addr_byte);
+ if (ret)
+ goto error;
+
+ ret = jdvbt90502_reg_read(state, 0x0100, result, 1);
+ if (ret)
+ goto error;
+
+ deb_fe("PLL read val:%02x\n", *result);
+ return 0;
+
+error:
+ deb_fe("%s:ret == %d\n", __func__, ret);
+ return -EREMOTEIO;
+}
+
+
+/* set pll frequency via the demodulator's I2C register */
+static int jdvbt90502_pll_set_freq(struct jdvbt90502_state *state, u32 freq)
+{
+ int ret;
+ int retry;
+ u8 res1;
+ u8 res2[9];
+
+ u8 pll_freq_cmd[PLL_CMD_LEN];
+ u8 pll_agc_cmd[PLL_CMD_LEN];
+ struct i2c_msg msg[2];
+ u32 f;
+
+ deb_fe("%s: freq=%d, step=%d\n", __func__, freq,
+ state->frontend.ops.info.frequency_stepsize);
+ /* freq -> oscilator frequency conversion. */
+ /* freq: 473,000,000 + n*6,000,000 (no 1/7MHz shift to center freq) */
+ /* add 400[1/7 MHZ] = 57.142857MHz. 57MHz for the IF, */
+ /* 1/7MHz for center freq shift */
+ f = freq / state->frontend.ops.info.frequency_stepsize;
+ f += 400;
+ pll_freq_cmd[DEMOD_REDIRECT_REG] = JDVBT90502_2ND_I2C_REG; /* 0xFE */
+ pll_freq_cmd[ADDRESS_BYTE] = state->config.pll_address << 1;
+ pll_freq_cmd[DIVIDER_BYTE1] = (f >> 8) & 0x7F;
+ pll_freq_cmd[DIVIDER_BYTE2] = f & 0xFF;
+ pll_freq_cmd[CONTROL_BYTE] = 0xB2; /* ref.divider:28, 4MHz/28=1/7MHz */
+ pll_freq_cmd[BANDSWITCH_BYTE] = 0x08; /* UHF band */
+
+ msg[0].addr = state->config.demod_address;
+ msg[0].flags = 0;
+ msg[0].buf = pll_freq_cmd;
+ msg[0].len = sizeof(pll_freq_cmd);
+
+ ret = i2c_transfer(state->i2c, &msg[0], 1);
+ if (ret != 1)
+ goto error;
+
+ udelay(50);
+
+ pll_agc_cmd[DEMOD_REDIRECT_REG] = pll_freq_cmd[DEMOD_REDIRECT_REG];
+ pll_agc_cmd[ADDRESS_BYTE] = pll_freq_cmd[ADDRESS_BYTE];
+ pll_agc_cmd[DIVIDER_BYTE1] = pll_freq_cmd[DIVIDER_BYTE1];
+ pll_agc_cmd[DIVIDER_BYTE2] = pll_freq_cmd[DIVIDER_BYTE2];
+ pll_agc_cmd[CONTROL_BYTE] = 0x9A; /* AGC_CTRL instead of BANDSWITCH */
+ pll_agc_cmd[AGC_CTRL_BYTE] = 0x50;
+ /* AGC Time Constant 2s, AGC take-over point:103dBuV(lowest) */
+
+ msg[1].addr = msg[0].addr;
+ msg[1].flags = 0;
+ msg[1].buf = pll_agc_cmd;
+ msg[1].len = sizeof(pll_agc_cmd);
+
+ ret = i2c_transfer(state->i2c, &msg[1], 1);
+ if (ret != 1)
+ goto error;
+
+ /* I don't know what these cmds are for, */
+ /* but the USB log on a windows box contains them */
+ ret = jdvbt90502_single_reg_write(state, 0x01, 0x40);
+ ret |= jdvbt90502_single_reg_write(state, 0x01, 0x00);
+ if (ret)
+ goto error;
+ udelay(100);
+
+ /* wait for the demod to be ready? */
+#define RETRY_COUNT 5
+ for (retry = 0; retry < RETRY_COUNT; retry++) {
+ ret = jdvbt90502_reg_read(state, 0x0096, &res1, 1);
+ if (ret)
+ goto error;
+ /* if (res1 != 0x00) goto error; */
+ ret = jdvbt90502_reg_read(state, 0x00B0, res2, sizeof(res2));
+ if (ret)
+ goto error;
+ if (res2[0] >= 0xA7)
+ break;
+ msleep(100);
+ }
+ if (retry >= RETRY_COUNT) {
+ deb_fe("%s: FE does not get ready after freq setting.\n",
+ __func__);
+ return -EREMOTEIO;
+ }
+
+ return 0;
+error:
+ deb_fe("%s:ret == %d\n", __func__, ret);
+ return -EREMOTEIO;
+}
+
+static int jdvbt90502_read_status(struct dvb_frontend *fe, fe_status_t *state)
+{
+ u8 result;
+ int ret;
+
+ *state = FE_HAS_SIGNAL;
+
+ ret = jdvbt90502_pll_read(fe->demodulator_priv, &result);
+ if (ret) {
+ deb_fe("%s:ret == %d\n", __func__, ret);
+ return -EREMOTEIO;
+ }
+
+ *state = FE_HAS_SIGNAL
+ | FE_HAS_CARRIER
+ | FE_HAS_VITERBI
+ | FE_HAS_SYNC;
+
+ if (result & PLL_STATUS_LOCKED)
+ *state |= FE_HAS_LOCK;
+
+ return 0;
+}
+
+static int jdvbt90502_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+ *ber = 0;
+ return 0;
+}
+
+static int jdvbt90502_read_signal_strength(struct dvb_frontend *fe,
+ u16 *strength)
+{
+ int ret;
+ u8 rbuf[37];
+
+ *strength = 0;
+
+ /* status register (incl. signal strength) : 0x89 */
+ /* TODO: read just the necessary registers [0x8B..0x8D]? */
+ ret = jdvbt90502_reg_read(fe->demodulator_priv, 0x0089,
+ rbuf, sizeof(rbuf));
+
+ if (ret) {
+ deb_fe("%s:ret == %d\n", __func__, ret);
+ return -EREMOTEIO;
+ }
+
+ /* signal_strength: rbuf[2-4] (24bit BE), use lower 16bit for now. */
+ *strength = (rbuf[3] << 8) + rbuf[4];
+ if (rbuf[2])
+ *strength = 0xffff;
+
+ return 0;
+}
+
+static int jdvbt90502_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+ *snr = 0x0101;
+ return 0;
+}
+
+static int jdvbt90502_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+ *ucblocks = 0;
+ return 0;
+}
+
+static int jdvbt90502_get_tune_settings(struct dvb_frontend *fe,
+ struct dvb_frontend_tune_settings *fs)
+{
+ fs->min_delay_ms = 500;
+ fs->step_size = 0;
+ fs->max_drift = 0;
+
+ return 0;
+}
+
+static int jdvbt90502_get_frontend(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *p)
+{
+ p->inversion = INVERSION_AUTO;
+ p->u.ofdm.bandwidth = BANDWIDTH_6_MHZ;
+ p->u.ofdm.code_rate_HP = FEC_AUTO;
+ p->u.ofdm.code_rate_LP = FEC_AUTO;
+ p->u.ofdm.constellation = QAM_64;
+ p->u.ofdm.transmission_mode = TRANSMISSION_MODE_AUTO;
+ p->u.ofdm.guard_interval = GUARD_INTERVAL_AUTO;
+ p->u.ofdm.hierarchy_information = HIERARCHY_AUTO;
+ return 0;
+}
+
+static int jdvbt90502_set_frontend(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *p)
+{
+ /**
+ * NOTE: ignore all the paramters except frequency.
+ * others should be fixed to the proper value for ISDB-T,
+ * but don't check here.
+ */
+
+ struct jdvbt90502_state *state = fe->demodulator_priv;
+ int ret;
+
+ deb_fe("%s: Freq:%d\n", __func__, p->frequency);
+
+ ret = jdvbt90502_pll_set_freq(state, p->frequency);
+ if (ret) {
+ deb_fe("%s:ret == %d\n", __func__, ret);
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+static int jdvbt90502_sleep(struct dvb_frontend *fe)
+{
+ deb_fe("%s called.\n", __func__);
+ return 0;
+}
+
+
+/**
+ * (reg, val) commad list to initialize this module.
+ * captured on a Windows box.
+ */
+static u8 init_code[][2] = {
+ {0x01, 0x40},
+ {0x04, 0x38},
+ {0x05, 0x40},
+ {0x07, 0x40},
+ {0x0F, 0x4F},
+ {0x11, 0x21},
+ {0x12, 0x0B},
+ {0x13, 0x2F},
+ {0x14, 0x31},
+ {0x16, 0x02},
+ {0x21, 0xC4},
+ {0x22, 0x20},
+ {0x2C, 0x79},
+ {0x2D, 0x34},
+ {0x2F, 0x00},
+ {0x30, 0x28},
+ {0x31, 0x31},
+ {0x32, 0xDF},
+ {0x38, 0x01},
+ {0x39, 0x78},
+ {0x3B, 0x33},
+ {0x3C, 0x33},
+ {0x48, 0x90},
+ {0x51, 0x68},
+ {0x5E, 0x38},
+ {0x71, 0x00},
+ {0x72, 0x08},
+ {0x77, 0x00},
+ {0xC0, 0x21},
+ {0xC1, 0x10},
+ {0xE4, 0x1A},
+ {0xEA, 0x1F},
+ {0x77, 0x00},
+ {0x71, 0x00},
+ {0x71, 0x00},
+ {0x76, 0x0C},
+};
+
+const static int init_code_len = sizeof(init_code) / sizeof(u8[2]);
+
+static int jdvbt90502_init(struct dvb_frontend *fe)
+{
+ int i = -1;
+ int ret;
+ struct i2c_msg msg;
+
+ struct jdvbt90502_state *state = fe->demodulator_priv;
+
+ deb_fe("%s called.\n", __func__);
+
+ msg.addr = state->config.demod_address;
+ msg.flags = 0;
+ msg.len = 2;
+ for (i = 0; i < init_code_len; i++) {
+ msg.buf = init_code[i];
+ ret = i2c_transfer(state->i2c, &msg, 1);
+ if (ret != 1)
+ goto error;
+ }
+ msleep(100);
+
+ return 0;
+
+error:
+ deb_fe("%s: init_code[%d] failed. ret==%d\n", __func__, i, ret);
+ return -EREMOTEIO;
+}
+
+
+static void jdvbt90502_release(struct dvb_frontend *fe)
+{
+ struct jdvbt90502_state *state = fe->demodulator_priv;
+ kfree(state);
+}
+
+
+static struct dvb_frontend_ops jdvbt90502_ops;
+
+struct dvb_frontend *jdvbt90502_attach(struct dvb_usb_device *d)
+{
+ struct jdvbt90502_state *state = NULL;
+
+ deb_info("%s called.\n", __func__);
+
+ /* allocate memory for the internal state */
+ state = kzalloc(sizeof(struct jdvbt90502_state), GFP_KERNEL);
+ if (state == NULL)
+ goto error;
+
+ /* setup the state */
+ state->i2c = &d->i2c_adap;
+ memcpy(&state->config, &friio_fe_config, sizeof(friio_fe_config));
+
+ /* create dvb_frontend */
+ memcpy(&state->frontend.ops, &jdvbt90502_ops,
+ sizeof(jdvbt90502_ops));
+ state->frontend.demodulator_priv = state;
+
+ if (jdvbt90502_init(&state->frontend) < 0)
+ goto error;
+
+ return &state->frontend;
+
+error:
+ kfree(state);
+ return NULL;
+}
+
+static struct dvb_frontend_ops jdvbt90502_ops = {
+
+ .info = {
+ .name = "Comtech JDVBT90502 ISDB-T",
+ .type = FE_OFDM,
+ .frequency_min = 473000000, /* UHF 13ch, center */
+ .frequency_max = 767142857, /* UHF 62ch, center */
+ .frequency_stepsize = JDVBT90502_PLL_CLK /
+ JDVBT90502_PLL_DIVIDER,
+ .frequency_tolerance = 0,
+
+ /* NOTE: this driver ignores all parameters but frequency. */
+ .caps = FE_CAN_INVERSION_AUTO |
+ FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
+ FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
+ FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+ FE_CAN_TRANSMISSION_MODE_AUTO |
+ FE_CAN_GUARD_INTERVAL_AUTO |
+ FE_CAN_HIERARCHY_AUTO,
+ },
+
+ .release = jdvbt90502_release,
+
+ .init = jdvbt90502_init,
+ .sleep = jdvbt90502_sleep,
+ .write = _jdvbt90502_write,
+
+ .set_frontend = jdvbt90502_set_frontend,
+ .get_frontend = jdvbt90502_get_frontend,
+ .get_tune_settings = jdvbt90502_get_tune_settings,
+
+ .read_status = jdvbt90502_read_status,
+ .read_ber = jdvbt90502_read_ber,
+ .read_signal_strength = jdvbt90502_read_signal_strength,
+ .read_snr = jdvbt90502_read_snr,
+ .read_ucblocks = jdvbt90502_read_ucblocks,
+};
diff --git a/drivers/media/dvb/dvb-usb/friio.c b/drivers/media/dvb/dvb-usb/friio.c
new file mode 100644
index 00000000000..14a65b4aec0
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/friio.c
@@ -0,0 +1,525 @@
+/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver.
+ *
+ * Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
+ *
+ * This module is based off the the gl861 and vp702x modules.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#include "friio.h"
+
+/* debug */
+int dvb_usb_friio_debug;
+module_param_named(debug, dvb_usb_friio_debug, int, 0644);
+MODULE_PARM_DESC(debug,
+ "set debugging level (1=info,2=xfer,4=rc,8=fe (or-able))."
+ DVB_USB_DEBUG_STATUS);
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+/**
+ * Indirect I2C access to the PLL via FE.
+ * whole I2C protocol data to the PLL is sent via the FE's I2C register.
+ * This is done by a control msg to the FE with the I2C data accompanied, and
+ * a specific USB request number is assigned for that purpose.
+ *
+ * this func sends wbuf[1..] to the I2C register wbuf[0] at addr (= at FE).
+ * TODO: refoctored, smarter i2c functions.
+ */
+static int gl861_i2c_ctrlmsg_data(struct dvb_usb_device *d, u8 addr,
+ u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
+{
+ u16 index = wbuf[0]; /* must be JDVBT90502_2ND_I2C_REG(=0xFE) */
+ u16 value = addr << (8 + 1);
+ int wo = (rbuf == NULL || rlen == 0); /* write only */
+ u8 req, type;
+
+ deb_xfer("write to PLL:0x%02x via FE reg:0x%02x, len:%d\n",
+ wbuf[1], wbuf[0], wlen - 1);
+
+ if (wo && wlen >= 2) {
+ req = GL861_REQ_I2C_DATA_CTRL_WRITE;
+ type = GL861_WRITE;
+ udelay(20);
+ return usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
+ req, type, value, index,
+ &wbuf[1], wlen - 1, 2000);
+ }
+
+ deb_xfer("not supported ctrl-msg, aborting.");
+ return -EINVAL;
+}
+
+/* normal I2C access (without extra data arguments).
+ * write to the register wbuf[0] at I2C address addr with the value wbuf[1],
+ * or read from the register wbuf[0].
+ * register address can be 16bit (wbuf[2]<<8 | wbuf[0]) if wlen==3
+ */
+static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr,
+ u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
+{
+ u16 index;
+ u16 value = addr << (8 + 1);
+ int wo = (rbuf == NULL || rlen == 0); /* write-only */
+ u8 req, type;
+ unsigned int pipe;
+
+ /* special case for the indirect I2C access to the PLL via FE, */
+ if (addr == friio_fe_config.demod_address &&
+ wbuf[0] == JDVBT90502_2ND_I2C_REG)
+ return gl861_i2c_ctrlmsg_data(d, addr, wbuf, wlen, rbuf, rlen);
+
+ if (wo) {
+ req = GL861_REQ_I2C_WRITE;
+ type = GL861_WRITE;
+ pipe = usb_sndctrlpipe(d->udev, 0);
+ } else { /* rw */
+ req = GL861_REQ_I2C_READ;
+ type = GL861_READ;
+ pipe = usb_rcvctrlpipe(d->udev, 0);
+ }
+
+ switch (wlen) {
+ case 1:
+ index = wbuf[0];
+ break;
+ case 2:
+ index = wbuf[0];
+ value = value + wbuf[1];
+ break;
+ case 3:
+ /* special case for 16bit register-address */
+ index = (wbuf[2] << 8) | wbuf[0];
+ value = value + wbuf[1];
+ break;
+ default:
+ deb_xfer("wlen = %x, aborting.", wlen);
+ return -EINVAL;
+ }
+ msleep(1);
+ return usb_control_msg(d->udev, pipe, req, type,
+ value, index, rbuf, rlen, 2000);
+}
+
+/* I2C */
+static int gl861_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+ int num)
+{
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ int i;
+
+
+ if (num > 2)
+ return -EINVAL;
+
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ return -EAGAIN;
+
+ for (i = 0; i < num; i++) {
+ /* write/read request */
+ if (i + 1 < num && (msg[i + 1].flags & I2C_M_RD)) {
+ if (gl861_i2c_msg(d, msg[i].addr,
+ msg[i].buf, msg[i].len,
+ msg[i + 1].buf, msg[i + 1].len) < 0)
+ break;
+ i++;
+ } else
+ if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf,
+ msg[i].len, NULL, 0) < 0)
+ break;
+ }
+
+ mutex_unlock(&d->i2c_mutex);
+ return i;
+}
+
+static u32 gl861_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+
+static int friio_ext_ctl(struct dvb_usb_adapter *adap,
+ u32 sat_color, int lnb_on)
+{
+ int i;
+ int ret;
+ struct i2c_msg msg;
+ u8 buf[2];
+ u32 mask;
+ u8 lnb = (lnb_on) ? FRIIO_CTL_LNB : 0;
+
+ msg.addr = 0x00;
+ msg.flags = 0;
+ msg.len = 2;
+ msg.buf = buf;
+
+ buf[0] = 0x00;
+
+ /* send 2bit header (&B10) */
+ buf[1] = lnb | FRIIO_CTL_LED | FRIIO_CTL_STROBE;
+ ret = gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+ buf[1] |= FRIIO_CTL_CLK;
+ ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+
+ buf[1] = lnb | FRIIO_CTL_STROBE;
+ ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+ buf[1] |= FRIIO_CTL_CLK;
+ ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+
+ /* send 32bit(satur, R, G, B) data in serial */
+ mask = 1 << 31;
+ for (i = 0; i < 32; i++) {
+ buf[1] = lnb | FRIIO_CTL_STROBE;
+ if (sat_color & mask)
+ buf[1] |= FRIIO_CTL_LED;
+ ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+ buf[1] |= FRIIO_CTL_CLK;
+ ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+ mask >>= 1;
+ }
+
+ /* set the strobe off */
+ buf[1] = lnb;
+ ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+ buf[1] |= FRIIO_CTL_CLK;
+ ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+
+ return (ret == 70);
+}
+
+
+static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff);
+
+/* TODO: move these init cmds to the FE's init routine? */
+static u8 streaming_init_cmds[][2] = {
+ {0x33, 0x08},
+ {0x37, 0x40},
+ {0x3A, 0x1F},
+ {0x3B, 0xFF},
+ {0x3C, 0x1F},
+ {0x3D, 0xFF},
+ {0x38, 0x00},
+ {0x35, 0x00},
+ {0x39, 0x00},
+ {0x36, 0x00},
+};
+static int cmdlen = sizeof(streaming_init_cmds) / 2;
+
+/*
+ * Command sequence in this init function is a replay
+ * of the captured USB commands from the Windows proprietary driver.
+ */
+static int friio_initialize(struct dvb_usb_device *d)
+{
+ int ret;
+ int i;
+ int retry = 0;
+ u8 rbuf[2];
+ u8 wbuf[3];
+
+ deb_info("%s called.\n", __func__);
+
+ /* use gl861_i2c_msg instead of gl861_i2c_xfer(), */
+ /* because the i2c device is not set up yet. */
+ wbuf[0] = 0x11;
+ wbuf[1] = 0x02;
+ ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+ if (ret < 0)
+ goto error;
+ msleep(2);
+
+ wbuf[0] = 0x11;
+ wbuf[1] = 0x00;
+ ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+ if (ret < 0)
+ goto error;
+ msleep(1);
+
+ /* following msgs should be in the FE's init code? */
+ /* cmd sequence to identify the device type? (friio black/white) */
+ wbuf[0] = 0x03;
+ wbuf[1] = 0x80;
+ /* can't use gl861_i2c_cmd, as the register-addr is 16bit(0x0100) */
+ ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
+ GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE,
+ 0x1200, 0x0100, wbuf, 2, 2000);
+ if (ret < 0)
+ goto error;
+
+ msleep(2);
+ wbuf[0] = 0x00;
+ wbuf[2] = 0x01; /* reg.0x0100 */
+ wbuf[1] = 0x00;
+ ret = gl861_i2c_msg(d, 0x12 >> 1, wbuf, 3, rbuf, 2);
+ /* my Friio White returns 0xffff. */
+ if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff)
+ goto error;
+
+ msleep(2);
+ wbuf[0] = 0x03;
+ wbuf[1] = 0x80;
+ ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
+ GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE,
+ 0x9000, 0x0100, wbuf, 2, 2000);
+ if (ret < 0)
+ goto error;
+
+ msleep(2);
+ wbuf[0] = 0x00;
+ wbuf[2] = 0x01; /* reg.0x0100 */
+ wbuf[1] = 0x00;
+ ret = gl861_i2c_msg(d, 0x90 >> 1, wbuf, 3, rbuf, 2);
+ /* my Friio White returns 0xffff again. */
+ if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff)
+ goto error;
+
+ msleep(1);
+
+restart:
+ /* ============ start DEMOD init cmds ================== */
+ /* read PLL status to clear the POR bit */
+ wbuf[0] = JDVBT90502_2ND_I2C_REG;
+ wbuf[1] = (FRIIO_PLL_ADDR << 1) + 1; /* +1 for reading */
+ ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, NULL, 0);
+ if (ret < 0)
+ goto error;
+
+ msleep(5);
+ /* note: DEMODULATOR has 16bit register-address. */
+ wbuf[0] = 0x00;
+ wbuf[2] = 0x01; /* reg addr: 0x0100 */
+ wbuf[1] = 0x00; /* val: not used */
+ ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 3, rbuf, 1);
+ if (ret < 0)
+ goto error;
+/*
+ msleep(1);
+ wbuf[0] = 0x80;
+ wbuf[1] = 0x00;
+ ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, rbuf, 1);
+ if (ret < 0)
+ goto error;
+ */
+ if (rbuf[0] & 0x80) { /* still in PowerOnReset state? */
+ if (++retry > 3) {
+ deb_info("failed to get the correct"
+ " FE demod status:0x%02x\n", rbuf[0]);
+ goto error;
+ }
+ msleep(100);
+ goto restart;
+ }
+
+ /* TODO: check return value in rbuf */
+ /* =========== end DEMOD init cmds ===================== */
+ msleep(1);
+
+ wbuf[0] = 0x30;
+ wbuf[1] = 0x04;
+ ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+ if (ret < 0)
+ goto error;
+
+ msleep(2);
+ /* following 2 cmds unnecessary? */
+ wbuf[0] = 0x00;
+ wbuf[1] = 0x01;
+ ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+ if (ret < 0)
+ goto error;
+
+ wbuf[0] = 0x06;
+ wbuf[1] = 0x0F;
+ ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+ if (ret < 0)
+ goto error;
+
+ /* some streaming ctl cmds (maybe) */
+ msleep(10);
+ for (i = 0; i < cmdlen; i++) {
+ ret = gl861_i2c_msg(d, 0x00, streaming_init_cmds[i], 2,
+ NULL, 0);
+ if (ret < 0)
+ goto error;
+ msleep(1);
+ }
+ msleep(20);
+
+ /* change the LED color etc. */
+ ret = friio_streaming_ctrl(&d->adapter[0], 0);
+ if (ret < 0)
+ goto error;
+
+ return 0;
+
+error:
+ deb_info("%s:ret == %d\n", __func__, ret);
+ return -EIO;
+}
+
+/* Callbacks for DVB USB */
+
+static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+ int ret;
+
+ deb_info("%s called.(%d)\n", __func__, onoff);
+
+ /* set the LED color and saturation (and LNB on) */
+ if (onoff)
+ ret = friio_ext_ctl(adap, 0x6400ff64, 1);
+ else
+ ret = friio_ext_ctl(adap, 0x96ff00ff, 1);
+
+ if (ret != 1) {
+ deb_info("%s failed to send cmdx. ret==%d\n", __func__, ret);
+ return -EREMOTEIO;
+ }
+ return 0;
+}
+
+static int friio_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ if (friio_initialize(adap->dev) < 0)
+ return -EIO;
+
+ adap->fe = jdvbt90502_attach(adap->dev);
+ if (adap->fe == NULL)
+ return -EIO;
+
+ return 0;
+}
+
+/* DVB USB Driver stuff */
+static struct dvb_usb_device_properties friio_properties;
+
+static int friio_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct dvb_usb_device *d;
+ struct usb_host_interface *alt;
+ int ret;
+
+ if (intf->num_altsetting < GL861_ALTSETTING_COUNT)
+ return -ENODEV;
+
+ alt = usb_altnum_to_altsetting(intf, FRIIO_BULK_ALTSETTING);
+ if (alt == NULL) {
+ deb_rc("not alt found!\n");
+ return -ENODEV;
+ }
+ ret = usb_set_interface(interface_to_usbdev(intf),
+ alt->desc.bInterfaceNumber,
+ alt->desc.bAlternateSetting);
+ if (ret != 0) {
+ deb_rc("failed to set alt-setting!\n");
+ return ret;
+ }
+
+ ret = dvb_usb_device_init(intf, &friio_properties,
+ THIS_MODULE, &d, adapter_nr);
+ if (ret == 0)
+ friio_streaming_ctrl(&d->adapter[0], 1);
+
+ return ret;
+}
+
+
+struct jdvbt90502_config friio_fe_config = {
+ .demod_address = FRIIO_DEMOD_ADDR,
+ .pll_address = FRIIO_PLL_ADDR,
+};
+
+static struct i2c_algorithm gl861_i2c_algo = {
+ .master_xfer = gl861_i2c_xfer,
+ .functionality = gl861_i2c_func,
+};
+
+static struct usb_device_id friio_table[] = {
+ { USB_DEVICE(USB_VID_774, USB_PID_FRIIO_WHITE) },
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, friio_table);
+
+
+static struct dvb_usb_device_properties friio_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+ .usb_ctrl = DEVICE_SPECIFIC,
+
+ .size_of_priv = 0,
+
+ .num_adapters = 1,
+ .adapter = {
+ /* caps:0 => no pid filter, 188B TS packet */
+ /* GL861 has a HW pid filter, but no info available. */
+ {
+ .caps = 0,
+
+ .frontend_attach = friio_frontend_attach,
+ .streaming_ctrl = friio_streaming_ctrl,
+
+ .stream = {
+ .type = USB_BULK,
+ /* count <= MAX_NO_URBS_FOR_DATA_STREAM(10) */
+ .count = 8,
+ .endpoint = 0x01,
+ .u = {
+ /* GL861 has 6KB buf inside */
+ .bulk = {
+ .buffersize = 16384,
+ }
+ }
+ },
+ }
+ },
+ .i2c_algo = &gl861_i2c_algo,
+
+ .num_device_descs = 1,
+ .devices = {
+ {
+ .name = "774 Friio ISDB-T USB2.0",
+ .cold_ids = { NULL },
+ .warm_ids = { &friio_table[0], NULL },
+ },
+ }
+};
+
+static struct usb_driver friio_driver = {
+ .name = "dvb_usb_friio",
+ .probe = friio_probe,
+ .disconnect = dvb_usb_device_exit,
+ .id_table = friio_table,
+};
+
+
+/* module stuff */
+static int __init friio_module_init(void)
+{
+ int ret;
+
+ ret = usb_register(&friio_driver);
+ if (ret)
+ err("usb_register failed. Error number %d", ret);
+
+ return ret;
+}
+
+
+static void __exit friio_module_exit(void)
+{
+ /* deregister this driver from the USB subsystem */
+ usb_deregister(&friio_driver);
+}
+
+module_init(friio_module_init);
+module_exit(friio_module_exit);
+
+MODULE_AUTHOR("Akihiro Tsukada <tskd2@yahoo.co.jp>");
+MODULE_DESCRIPTION("Driver for Friio ISDB-T USB2.0 Receiver");
+MODULE_VERSION("0.2");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/friio.h b/drivers/media/dvb/dvb-usb/friio.h
new file mode 100644
index 00000000000..af8d55e390f
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/friio.h
@@ -0,0 +1,99 @@
+/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver.
+ *
+ * Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
+ *
+ * This module is based off the the gl861 and vp702x modules.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#ifndef _DVB_USB_FRIIO_H_
+#define _DVB_USB_FRIIO_H_
+
+/**
+ * Friio Components
+ * USB hub: AU4254
+ * USB controller(+ TS dmx & streaming): GL861
+ * Frontend: comtech JDVBT-90502
+ * (tuner PLL: tua6034, I2C addr:(0xC0 >> 1))
+ * (OFDM demodulator: TC90502, I2C addr:(0x30 >> 1))
+ * LED x3 (+LNB) controll: PIC 16F676
+ * EEPROM: 24C08
+ *
+ * (USB smart card reader: AU9522)
+ *
+ */
+
+#define DVB_USB_LOG_PREFIX "friio"
+#include "dvb-usb.h"
+
+extern int dvb_usb_friio_debug;
+#define deb_info(args...) dprintk(dvb_usb_friio_debug, 0x01, args)
+#define deb_xfer(args...) dprintk(dvb_usb_friio_debug, 0x02, args)
+#define deb_rc(args...) dprintk(dvb_usb_friio_debug, 0x04, args)
+#define deb_fe(args...) dprintk(dvb_usb_friio_debug, 0x08, args)
+
+/* Vendor requests */
+#define GL861_WRITE 0x40
+#define GL861_READ 0xc0
+
+/* command bytes */
+#define GL861_REQ_I2C_WRITE 0x01
+#define GL861_REQ_I2C_READ 0x02
+/* For control msg with data argument */
+/* Used for accessing the PLL on the secondary I2C bus of FE via GL861 */
+#define GL861_REQ_I2C_DATA_CTRL_WRITE 0x03
+
+#define GL861_ALTSETTING_COUNT 2
+#define FRIIO_BULK_ALTSETTING 0
+#define FRIIO_ISOC_ALTSETTING 1
+
+/* LED & LNB control via PIC. */
+/* basically, it's serial control with clock and strobe. */
+/* write the below 4bit control data to the reg 0x00 at the I2C addr 0x00 */
+/* when controlling the LEDs, 32bit(saturation, R, G, B) is sent on the bit3*/
+#define FRIIO_CTL_LNB (1 << 0)
+#define FRIIO_CTL_STROBE (1 << 1)
+#define FRIIO_CTL_CLK (1 << 2)
+#define FRIIO_CTL_LED (1 << 3)
+
+/* Front End related */
+
+#define FRIIO_DEMOD_ADDR (0x30 >> 1)
+#define FRIIO_PLL_ADDR (0xC0 >> 1)
+
+#define JDVBT90502_PLL_CLK 4000000
+#define JDVBT90502_PLL_DIVIDER 28
+
+#define JDVBT90502_2ND_I2C_REG 0xFE
+
+/* byte index for pll i2c command data structure*/
+/* see datasheet for tua6034 */
+#define DEMOD_REDIRECT_REG 0
+#define ADDRESS_BYTE 1
+#define DIVIDER_BYTE1 2
+#define DIVIDER_BYTE2 3
+#define CONTROL_BYTE 4
+#define BANDSWITCH_BYTE 5
+#define AGC_CTRL_BYTE 5
+#define PLL_CMD_LEN 6
+
+/* bit masks for PLL STATUS response */
+#define PLL_STATUS_POR_MODE 0x80 /* 1: Power on Reset (test) Mode */
+#define PLL_STATUS_LOCKED 0x40 /* 1: locked */
+#define PLL_STATUS_AGC_ACTIVE 0x08 /* 1:active */
+#define PLL_STATUS_TESTMODE 0x07 /* digital output level (5 level) */
+ /* 0.15Vcc step 0x00: < 0.15Vcc, ..., 0x04: >= 0.6Vcc (<= 1Vcc) */
+
+
+struct jdvbt90502_config {
+ u8 demod_address; /* i2c addr for demodulator IC */
+ u8 pll_address; /* PLL addr on the secondary i2c*/
+};
+extern struct jdvbt90502_config friio_fe_config;
+
+extern struct dvb_frontend *jdvbt90502_attach(struct dvb_usb_device *d);
+#endif
generated by cgit (git 2.34.1) at 2024-11-07 08:34:09 +0000