summaryrefslogtreecommitdiffstats
path: root/drivers/ide/ide-floppy.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/ide-floppy.c')
-rw-r--r--drivers/ide/ide-floppy.c357
1 files changed, 71 insertions, 286 deletions
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index f05fbc2bd7a..b3689437269 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -286,11 +286,12 @@ static void idefloppy_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc,
{
struct ide_floppy_obj *floppy = drive->driver_data;
- ide_init_drive_cmd(rq);
+ blk_rq_init(NULL, rq);
rq->buffer = (char *) pc;
rq->cmd_type = REQ_TYPE_SPECIAL;
+ rq->cmd_flags |= REQ_PREEMPT;
rq->rq_disk = floppy->disk;
- (void) ide_do_drive_cmd(drive, rq, ide_preempt);
+ ide_do_drive_cmd(drive, rq);
}
static struct ide_atapi_pc *idefloppy_next_pc_storage(ide_drive_t *drive)
@@ -311,50 +312,41 @@ static struct request *idefloppy_next_rq_storage(ide_drive_t *drive)
return (&floppy->rq_stack[floppy->rq_stack_index++]);
}
-static void idefloppy_request_sense_callback(ide_drive_t *drive)
+static void ide_floppy_callback(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
- u8 *buf = floppy->pc->buf;
+ struct ide_atapi_pc *pc = floppy->pc;
+ int uptodate = pc->error ? 0 : 1;
debug_log("Reached %s\n", __func__);
- if (!floppy->pc->error) {
- floppy->sense_key = buf[2] & 0x0F;
- floppy->asc = buf[12];
- floppy->ascq = buf[13];
- floppy->progress_indication = buf[15] & 0x80 ?
- (u16)get_unaligned((u16 *)&buf[16]) : 0x10000;
+ if (floppy->failed_pc == pc)
+ floppy->failed_pc = NULL;
- if (floppy->failed_pc)
- debug_log("pc = %x, sense key = %x, asc = %x,"
- " ascq = %x\n",
- floppy->failed_pc->c[0],
- floppy->sense_key,
- floppy->asc,
- floppy->ascq);
- else
- debug_log("sense key = %x, asc = %x, ascq = %x\n",
- floppy->sense_key,
- floppy->asc,
- floppy->ascq);
+ if (pc->c[0] == GPCMD_READ_10 || pc->c[0] == GPCMD_WRITE_10 ||
+ (pc->rq && blk_pc_request(pc->rq)))
+ uptodate = 1; /* FIXME */
+ else if (pc->c[0] == GPCMD_REQUEST_SENSE) {
+ u8 *buf = floppy->pc->buf;
+ if (!pc->error) {
+ floppy->sense_key = buf[2] & 0x0F;
+ floppy->asc = buf[12];
+ floppy->ascq = buf[13];
+ floppy->progress_indication = buf[15] & 0x80 ?
+ (u16)get_unaligned((u16 *)&buf[16]) : 0x10000;
- idefloppy_end_request(drive, 1, 0);
- } else {
- printk(KERN_ERR "Error in REQUEST SENSE itself - Aborting"
- " request!\n");
- idefloppy_end_request(drive, 0, 0);
- }
-}
+ if (floppy->failed_pc)
+ debug_log("pc = %x, ", floppy->failed_pc->c[0]);
-/* General packet command callback function. */
-static void idefloppy_pc_callback(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
-
- debug_log("Reached %s\n", __func__);
+ debug_log("sense key = %x, asc = %x, ascq = %x\n",
+ floppy->sense_key, floppy->asc, floppy->ascq);
+ } else
+ printk(KERN_ERR "Error in REQUEST SENSE itself - "
+ "Aborting request!\n");
+ }
- idefloppy_end_request(drive, floppy->pc->error ? 0 : 1, 0);
+ idefloppy_end_request(drive, uptodate, 0);
}
static void idefloppy_init_pc(struct ide_atapi_pc *pc)
@@ -365,7 +357,7 @@ static void idefloppy_init_pc(struct ide_atapi_pc *pc)
pc->req_xfer = 0;
pc->buf = pc->pc_buf;
pc->buf_size = IDEFLOPPY_PC_BUFFER_SIZE;
- pc->idefloppy_callback = &idefloppy_pc_callback;
+ pc->callback = ide_floppy_callback;
}
static void idefloppy_create_request_sense_cmd(struct ide_atapi_pc *pc)
@@ -374,7 +366,6 @@ static void idefloppy_create_request_sense_cmd(struct ide_atapi_pc *pc)
pc->c[0] = GPCMD_REQUEST_SENSE;
pc->c[4] = 255;
pc->req_xfer = 18;
- pc->idefloppy_callback = &idefloppy_request_sense_callback;
}
/*
@@ -397,174 +388,19 @@ static void idefloppy_retry_pc(ide_drive_t *drive)
static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
- ide_hwif_t *hwif = drive->hwif;
- struct ide_atapi_pc *pc = floppy->pc;
- struct request *rq = pc->rq;
- xfer_func_t *xferfunc;
- unsigned int temp;
- int dma_error = 0;
- u16 bcount;
- u8 stat, ireason;
-
- debug_log("Reached %s interrupt handler\n", __func__);
-
- if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
- dma_error = hwif->dma_ops->dma_end(drive);
- if (dma_error) {
- printk(KERN_ERR "%s: DMA %s error\n", drive->name,
- rq_data_dir(rq) ? "write" : "read");
- pc->flags |= PC_FLAG_DMA_ERROR;
- } else {
- pc->xferred = pc->req_xfer;
- idefloppy_update_buffers(drive, pc);
- }
- debug_log("DMA finished\n");
- }
-
- /* Clear the interrupt */
- stat = ide_read_status(drive);
-
- /* No more interrupts */
- if ((stat & DRQ_STAT) == 0) {
- debug_log("Packet command completed, %d bytes transferred\n",
- pc->xferred);
- pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
-
- local_irq_enable_in_hardirq();
-
- if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) {
- /* Error detected */
- debug_log("%s: I/O error\n", drive->name);
- rq->errors++;
- if (pc->c[0] == GPCMD_REQUEST_SENSE) {
- printk(KERN_ERR "ide-floppy: I/O error in "
- "request sense command\n");
- return ide_do_reset(drive);
- }
- /* Retry operation */
- idefloppy_retry_pc(drive);
- /* queued, but not started */
- return ide_stopped;
- }
- pc->error = 0;
- if (floppy->failed_pc == pc)
- floppy->failed_pc = NULL;
- /* Command finished - Call the callback function */
- pc->idefloppy_callback(drive);
- return ide_stopped;
- }
-
- if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
- pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
- printk(KERN_ERR "ide-floppy: The floppy wants to issue "
- "more interrupts in DMA mode\n");
- ide_dma_off(drive);
- return ide_do_reset(drive);
- }
-
- /* Get the number of bytes to transfer */
- bcount = (hwif->INB(hwif->io_ports.lbah_addr) << 8) |
- hwif->INB(hwif->io_ports.lbam_addr);
- /* on this interrupt */
- ireason = hwif->INB(hwif->io_ports.nsect_addr);
-
- if (ireason & CD) {
- printk(KERN_ERR "ide-floppy: CoD != 0 in %s\n", __func__);
- return ide_do_reset(drive);
- }
- if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) {
- /* Hopefully, we will never get here */
- printk(KERN_ERR "ide-floppy: We wanted to %s, ",
- (ireason & IO) ? "Write" : "Read");
- printk(KERN_ERR "but the floppy wants us to %s !\n",
- (ireason & IO) ? "Read" : "Write");
- return ide_do_reset(drive);
- }
- if (!(pc->flags & PC_FLAG_WRITING)) {
- /* Reading - Check that we have enough space */
- temp = pc->xferred + bcount;
- if (temp > pc->req_xfer) {
- if (temp > pc->buf_size) {
- printk(KERN_ERR "ide-floppy: The floppy wants "
- "to send us more data than expected "
- "- discarding data\n");
- ide_pad_transfer(drive, 0, bcount);
-
- ide_set_handler(drive,
- &idefloppy_pc_intr,
- IDEFLOPPY_WAIT_CMD,
- NULL);
- return ide_started;
- }
- debug_log("The floppy wants to send us more data than"
- " expected - allowing transfer\n");
- }
- }
- if (pc->flags & PC_FLAG_WRITING)
- xferfunc = hwif->output_data;
- else
- xferfunc = hwif->input_data;
-
- if (pc->buf)
- xferfunc(drive, NULL, pc->cur_pos, bcount);
- else
- ide_floppy_io_buffers(drive, pc, bcount,
- !!(pc->flags & PC_FLAG_WRITING));
-
- /* Update the current position */
- pc->xferred += bcount;
- pc->cur_pos += bcount;
-
- /* And set the interrupt handler again */
- ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL);
- return ide_started;
-}
-
-/*
- * This is the original routine that did the packet transfer.
- * It fails at high speeds on the Iomega ZIP drive, so there's a slower version
- * for that drive below. The algorithm is chosen based on drive type
- */
-static ide_startstop_t idefloppy_transfer_pc(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- ide_startstop_t startstop;
- idefloppy_floppy_t *floppy = drive->driver_data;
- u8 ireason;
-
- if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
- printk(KERN_ERR "ide-floppy: Strange, packet command "
- "initiated yet DRQ isn't asserted\n");
- return startstop;
- }
- ireason = hwif->INB(hwif->io_ports.nsect_addr);
- if ((ireason & CD) == 0 || (ireason & IO)) {
- printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) while "
- "issuing a packet command\n");
- return ide_do_reset(drive);
- }
- /* Set the interrupt routine */
- ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL);
-
- /* Send the actual packet */
- hwif->output_data(drive, NULL, floppy->pc->c, 12);
-
- return ide_started;
+ return ide_pc_intr(drive, floppy->pc, idefloppy_pc_intr,
+ IDEFLOPPY_WAIT_CMD, NULL, idefloppy_update_buffers,
+ idefloppy_retry_pc, NULL, ide_floppy_io_buffers);
}
-
/*
* What we have here is a classic case of a top half / bottom half interrupt
* service routine. In interrupt mode, the device sends an interrupt to signal
* that it is ready to receive a packet. However, we need to delay about 2-3
* ticks before issuing the packet or we gets in trouble.
- *
- * So, follow carefully. transfer_pc1 is called as an interrupt (or directly).
- * In either case, when the device says it's ready for a packet, we schedule
- * the packet transfer to occur about 2-3 ticks later in transfer_pc2.
*/
-static int idefloppy_transfer_pc2(ide_drive_t *drive)
+static int idefloppy_transfer_pc(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
@@ -575,24 +411,19 @@ static int idefloppy_transfer_pc2(ide_drive_t *drive)
return IDEFLOPPY_WAIT_CMD;
}
-static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive)
+
+/*
+ * Called as an interrupt (or directly). When the device says it's ready for a
+ * packet, we schedule the packet transfer to occur about 2-3 ticks later in
+ * transfer_pc.
+ */
+static ide_startstop_t idefloppy_start_pc_transfer(ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
idefloppy_floppy_t *floppy = drive->driver_data;
- ide_startstop_t startstop;
- u8 ireason;
+ struct ide_atapi_pc *pc = floppy->pc;
+ ide_expiry_t *expiry;
+ unsigned int timeout;
- if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
- printk(KERN_ERR "ide-floppy: Strange, packet command "
- "initiated yet DRQ isn't asserted\n");
- return startstop;
- }
- ireason = hwif->INB(hwif->io_ports.nsect_addr);
- if ((ireason & CD) == 0 || (ireason & IO)) {
- printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) "
- "while issuing a packet command\n");
- return ide_do_reset(drive);
- }
/*
* The following delay solves a problem with ATAPI Zip 100 drives
* where the Busy flag was apparently being deasserted before the
@@ -601,10 +432,15 @@ static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive)
* 40 and 50msec work well. idefloppy_pc_intr will not be actually
* used until after the packet is moved in about 50 msec.
*/
+ if (pc->flags & PC_FLAG_ZIP_DRIVE) {
+ timeout = floppy->ticks;
+ expiry = &idefloppy_transfer_pc;
+ } else {
+ timeout = IDEFLOPPY_WAIT_CMD;
+ expiry = NULL;
+ }
- ide_set_handler(drive, &idefloppy_pc_intr, floppy->ticks,
- &idefloppy_transfer_pc2);
- return ide_started;
+ return ide_transfer_pc(drive, pc, idefloppy_pc_intr, timeout, expiry);
}
static void ide_floppy_report_error(idefloppy_floppy_t *floppy,
@@ -627,10 +463,6 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
struct ide_atapi_pc *pc)
{
idefloppy_floppy_t *floppy = drive->driver_data;
- ide_hwif_t *hwif = drive->hwif;
- ide_handler_t *pkt_xfer_routine;
- u16 bcount;
- u8 dma;
if (floppy->failed_pc == NULL &&
pc->c[0] != GPCMD_REQUEST_SENSE)
@@ -645,65 +477,16 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
pc->error = IDEFLOPPY_ERROR_GENERAL;
floppy->failed_pc = NULL;
- pc->idefloppy_callback(drive);
+ pc->callback(drive);
return ide_stopped;
}
debug_log("Retry number - %d\n", pc->retries);
pc->retries++;
- /* We haven't transferred any data yet */
- pc->xferred = 0;
- pc->cur_pos = pc->buf;
- bcount = min(pc->req_xfer, 63 * 1024);
-
- if (pc->flags & PC_FLAG_DMA_ERROR) {
- pc->flags &= ~PC_FLAG_DMA_ERROR;
- ide_dma_off(drive);
- }
- dma = 0;
-
- if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma)
- dma = !hwif->dma_ops->dma_setup(drive);
- ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK |
- IDE_TFLAG_OUT_DEVICE, bcount, dma);
-
- if (dma) {
- /* Begin DMA, if necessary */
- pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
- hwif->dma_ops->dma_start(drive);
- }
-
- /* Can we transfer the packet when we get the interrupt or wait? */
- if (floppy->flags & IDEFLOPPY_FLAG_ZIP_DRIVE) {
- /* wait */
- pkt_xfer_routine = &idefloppy_transfer_pc1;
- } else {
- /* immediate */
- pkt_xfer_routine = &idefloppy_transfer_pc;
- }
-
- if (floppy->flags & IDEFLOPPY_FLAG_DRQ_INTERRUPT) {
- /* Issue the packet command */
- ide_execute_command(drive, WIN_PACKETCMD,
- pkt_xfer_routine,
- IDEFLOPPY_WAIT_CMD,
- NULL);
- return ide_started;
- } else {
- /* Issue the packet command */
- ide_execute_pkt_cmd(drive);
- return (*pkt_xfer_routine) (drive);
- }
-}
-
-static void idefloppy_rw_callback(ide_drive_t *drive)
-{
- debug_log("Reached %s\n", __func__);
-
- idefloppy_end_request(drive, 1, 0);
- return;
+ return ide_issue_pc(drive, pc, idefloppy_start_pc_transfer,
+ IDEFLOPPY_WAIT_CMD, NULL);
}
static void idefloppy_create_prevent_cmd(struct ide_atapi_pc *pc, int prevent)
@@ -800,21 +583,19 @@ static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy,
put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]);
put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[2]);
- pc->idefloppy_callback = &idefloppy_rw_callback;
pc->rq = rq;
pc->b_count = cmd == READ ? 0 : rq->bio->bi_size;
if (rq->cmd_flags & REQ_RW)
pc->flags |= PC_FLAG_WRITING;
pc->buf = NULL;
pc->req_xfer = pc->buf_size = blocks * floppy->block_size;
- pc->flags |= PC_FLAG_DMA_RECOMMENDED;
+ pc->flags |= PC_FLAG_DMA_OK;
}
static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy,
struct ide_atapi_pc *pc, struct request *rq)
{
idefloppy_init_pc(pc);
- pc->idefloppy_callback = &idefloppy_rw_callback;
memcpy(pc->c, rq->cmd, sizeof(pc->c));
pc->rq = rq;
pc->b_count = rq->data_len;
@@ -822,7 +603,7 @@ static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy,
pc->flags |= PC_FLAG_WRITING;
pc->buf = rq->data;
if (rq->bio)
- pc->flags |= PC_FLAG_DMA_RECOMMENDED;
+ pc->flags |= PC_FLAG_DMA_OK;
/*
* possibly problematic, doesn't look like ide-floppy correctly
* handled scattered requests if dma fails...
@@ -875,7 +656,14 @@ static ide_startstop_t idefloppy_do_request(ide_drive_t *drive,
return ide_stopped;
}
+ if (floppy->flags & IDEFLOPPY_FLAG_DRQ_INTERRUPT)
+ pc->flags |= PC_FLAG_DRQ_INTERRUPT;
+
+ if (floppy->flags & IDEFLOPPY_FLAG_ZIP_DRIVE)
+ pc->flags |= PC_FLAG_ZIP_DRIVE;
+
pc->rq = rq;
+
return idefloppy_issue_pc(drive, pc);
}
@@ -886,14 +674,16 @@ static ide_startstop_t idefloppy_do_request(ide_drive_t *drive,
static int idefloppy_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc)
{
struct ide_floppy_obj *floppy = drive->driver_data;
- struct request rq;
+ struct request *rq;
+ int error;
- ide_init_drive_cmd(&rq);
- rq.buffer = (char *) pc;
- rq.cmd_type = REQ_TYPE_SPECIAL;
- rq.rq_disk = floppy->disk;
+ rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
+ rq->buffer = (char *) pc;
+ rq->cmd_type = REQ_TYPE_SPECIAL;
+ error = blk_execute_rq(drive->queue, floppy->disk, rq, 0);
+ blk_put_request(rq);
- return ide_do_drive_cmd(drive, &rq, ide_wait);
+ return error;
}
/*
@@ -1622,11 +1412,6 @@ static int ide_floppy_probe(ide_drive_t *drive)
" of ide-floppy\n", drive->name);
goto failed;
}
- if (drive->scsi) {
- printk(KERN_INFO "ide-floppy: passing drive %s to ide-scsi"
- " emulation.\n", drive->name);
- goto failed;
- }
floppy = kzalloc(sizeof(idefloppy_floppy_t), GFP_KERNEL);
if (!floppy) {
printk(KERN_ERR "ide-floppy: %s: Can't allocate a floppy"