diff options
Diffstat (limited to 'drivers/hwmon/lm87.c')
| -rw-r--r-- | drivers/hwmon/lm87.c | 33 |
1 files changed, 20 insertions, 13 deletions
diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c index 21970f0d53a..2e4a3cea95f 100644 --- a/drivers/hwmon/lm87.c +++ b/drivers/hwmon/lm87.c @@ -21,11 +21,10 @@ * http://www.national.com/pf/LM/LM87.html * * Some functions share pins, so not all functions are available at the same - * time. Which are depends on the hardware setup. This driver assumes that - * the BIOS configured the chip correctly. In that respect, it differs from - * the original driver (from lm_sensors for Linux 2.4), which would force the - * LM87 to an arbitrary, compile-time chosen mode, regardless of the actual - * chipset wiring. + * time. Which are depends on the hardware setup. This driver normally + * assumes that firmware configured the chip correctly. Where this is not + * the case, platform code must set the I2C client's platform_data to point + * to a u8 value to be written to the channel register. * For reference, here is the list of exclusive functions: * - in0+in5 (default) or temp3 * - fan1 (default) or in6 @@ -199,6 +198,7 @@ struct lm87_data { unsigned long last_updated; /* In jiffies */ u8 channel; /* register value */ + u8 config; /* original register value */ u8 in[8]; /* register value */ u8 in_max[8]; /* register value */ @@ -832,6 +832,7 @@ exit_remove: sysfs_remove_group(&new_client->dev.kobj, &lm87_group); sysfs_remove_group(&new_client->dev.kobj, &lm87_group_opt); exit_free: + lm87_write_value(new_client, LM87_REG_CONFIG, data->config); kfree(data); exit: return err; @@ -840,12 +841,17 @@ exit: static void lm87_init_client(struct i2c_client *client) { struct lm87_data *data = i2c_get_clientdata(client); - u8 config; - data->channel = lm87_read_value(client, LM87_REG_CHANNEL_MODE); + if (client->dev.platform_data) { + data->channel = *(u8 *)client->dev.platform_data; + lm87_write_value(client, + LM87_REG_CHANNEL_MODE, data->channel); + } else { + data->channel = lm87_read_value(client, LM87_REG_CHANNEL_MODE); + } + data->config = lm87_read_value(client, LM87_REG_CONFIG) & 0x6F; - config = lm87_read_value(client, LM87_REG_CONFIG); - if (!(config & 0x01)) { + if (!(data->config & 0x01)) { int i; /* Limits are left uninitialized after power-up */ @@ -867,11 +873,11 @@ static void lm87_init_client(struct i2c_client *client) lm87_write_value(client, LM87_REG_IN_MAX(0), 0xFF); } } - if ((config & 0x81) != 0x01) { - /* Start monitoring */ + + /* Make sure Start is set and INT#_Clear is clear */ + if ((data->config & 0x09) != 0x01) lm87_write_value(client, LM87_REG_CONFIG, - (config & 0xF7) | 0x01); - } + (data->config & 0x77) | 0x01); } static int lm87_remove(struct i2c_client *client) @@ -882,6 +888,7 @@ static int lm87_remove(struct i2c_client *client) sysfs_remove_group(&client->dev.kobj, &lm87_group); sysfs_remove_group(&client->dev.kobj, &lm87_group_opt); + lm87_write_value(client, LM87_REG_CONFIG, data->config); kfree(data); return 0; } |