diff options
Diffstat (limited to 'drivers/block/ub.c')
-rw-r--r-- | drivers/block/ub.c | 404 |
1 files changed, 287 insertions, 117 deletions
diff --git a/drivers/block/ub.c b/drivers/block/ub.c index c7a28f5be42..ba05e31709d 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -9,7 +9,6 @@ * * TODO (sorted by decreasing priority) * -- Kill first_open (Al Viro fixed the block layer now) - * -- Do resets with usb_device_reset (needs a thread context, use khubd) * -- set readonly flag for CDs, set removable flag for CF readers * -- do inquiry and verify we got a disk and not a tape (for LUN mismatch) * -- special case some senses, e.g. 3a/0 -> no media present, reduce retries @@ -236,6 +235,13 @@ struct ub_scsi_cmd { void *back; }; +struct ub_request { + struct request *rq; + unsigned int current_try; + unsigned int nsg; /* sgv[nsg] */ + struct scatterlist sgv[UB_MAX_REQ_SG]; +}; + /* */ struct ub_capacity { @@ -331,6 +337,8 @@ struct ub_lun { int readonly; int first_open; /* Kludge. See ub_bd_open. */ + struct ub_request urq; + /* Use Ingo's mempool if or when we have more than one command. */ /* * Currently we never need more than one command for the whole device. @@ -351,6 +359,7 @@ struct ub_dev { atomic_t poison; /* The USB device is disconnected */ int openc; /* protected by ub_lock! */ /* kref is too implicit for our taste */ + int reset; /* Reset is running */ unsigned int tagcnt; char name[12]; struct usb_device *dev; @@ -378,6 +387,9 @@ struct ub_dev { struct bulk_cs_wrap work_bcs; struct usb_ctrlrequest work_cr; + struct work_struct reset_work; + wait_queue_head_t reset_wait; + int sg_stat[6]; struct ub_scsi_trace tr; }; @@ -386,12 +398,14 @@ struct ub_dev { */ static void ub_cleanup(struct ub_dev *sc); static int ub_request_fn_1(struct ub_lun *lun, struct request *rq); -static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, - struct ub_scsi_cmd *cmd, struct request *rq); -static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun, - struct ub_scsi_cmd *cmd, struct request *rq); +static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, + struct ub_scsi_cmd *cmd, struct ub_request *urq); +static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun, + struct ub_scsi_cmd *cmd, struct ub_request *urq); static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd); static void ub_end_rq(struct request *rq, int uptodate); +static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun, + struct ub_request *urq, struct ub_scsi_cmd *cmd); static int ub_submit_scsi(struct ub_dev *sc, struct ub_scsi_cmd *cmd); static void ub_urb_complete(struct urb *urb, struct pt_regs *pt); static void ub_scsi_action(unsigned long _dev); @@ -406,6 +420,8 @@ static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd); static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd, int stalled_pipe); static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd); +static void ub_reset_enter(struct ub_dev *sc); +static void ub_reset_task(void *arg); static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun); static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun, struct ub_capacity *ret); @@ -518,6 +534,9 @@ static ssize_t ub_diag_show(struct device *dev, struct device_attribute *attr, spin_lock_irqsave(&sc->lock, flags); cnt += sprintf(page + cnt, + "poison %d reset %d\n", + atomic_read(&sc->poison), sc->reset); + cnt += sprintf(page + cnt, "qlen %d qmax %d\n", sc->cmd_queue.qlen, sc->cmd_queue.qmax); cnt += sprintf(page + cnt, @@ -766,7 +785,8 @@ static int ub_request_fn_1(struct ub_lun *lun, struct request *rq) { struct ub_dev *sc = lun->udev; struct ub_scsi_cmd *cmd; - int rc; + struct ub_request *urq; + int n_elem; if (atomic_read(&sc->poison) || lun->changed) { blkdev_dequeue_request(rq); @@ -774,65 +794,70 @@ static int ub_request_fn_1(struct ub_lun *lun, struct request *rq) return 0; } + if (lun->urq.rq != NULL) + return -1; if ((cmd = ub_get_cmd(lun)) == NULL) return -1; memset(cmd, 0, sizeof(struct ub_scsi_cmd)); blkdev_dequeue_request(rq); + + urq = &lun->urq; + memset(urq, 0, sizeof(struct ub_request)); + urq->rq = rq; + + /* + * get scatterlist from block layer + */ + n_elem = blk_rq_map_sg(lun->disk->queue, rq, &urq->sgv[0]); + if (n_elem < 0) { + printk(KERN_INFO "%s: failed request map (%d)\n", + lun->name, n_elem); /* P3 */ + goto drop; + } + if (n_elem > UB_MAX_REQ_SG) { /* Paranoia */ + printk(KERN_WARNING "%s: request with %d segments\n", + lun->name, n_elem); + goto drop; + } + urq->nsg = n_elem; + sc->sg_stat[n_elem < 5 ? n_elem : 5]++; + if (blk_pc_request(rq)) { - rc = ub_cmd_build_packet(sc, lun, cmd, rq); + ub_cmd_build_packet(sc, lun, cmd, urq); } else { - rc = ub_cmd_build_block(sc, lun, cmd, rq); - } - if (rc != 0) { - ub_put_cmd(lun, cmd); - ub_end_rq(rq, 0); - return 0; + ub_cmd_build_block(sc, lun, cmd, urq); } cmd->state = UB_CMDST_INIT; cmd->lun = lun; cmd->done = ub_rw_cmd_done; - cmd->back = rq; + cmd->back = urq; cmd->tag = sc->tagcnt++; - if (ub_submit_scsi(sc, cmd) != 0) { - ub_put_cmd(lun, cmd); - ub_end_rq(rq, 0); - return 0; - } + if (ub_submit_scsi(sc, cmd) != 0) + goto drop; + + return 0; +drop: + ub_put_cmd(lun, cmd); + ub_end_rq(rq, 0); return 0; } -static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, - struct ub_scsi_cmd *cmd, struct request *rq) +static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, + struct ub_scsi_cmd *cmd, struct ub_request *urq) { - int ub_dir; - int n_elem; + struct request *rq = urq->rq; unsigned int block, nblks; if (rq_data_dir(rq) == WRITE) - ub_dir = UB_DIR_WRITE; + cmd->dir = UB_DIR_WRITE; else - ub_dir = UB_DIR_READ; - cmd->dir = ub_dir; + cmd->dir = UB_DIR_READ; - /* - * get scatterlist from block layer - */ - n_elem = blk_rq_map_sg(lun->disk->queue, rq, &cmd->sgv[0]); - if (n_elem <= 0) { - printk(KERN_INFO "%s: failed request map (%d)\n", - sc->name, n_elem); /* P3 */ - return -1; /* request with no s/g entries? */ - } - if (n_elem > UB_MAX_REQ_SG) { /* Paranoia */ - printk(KERN_WARNING "%s: request with %d segments\n", - sc->name, n_elem); - return -1; - } - cmd->nsg = n_elem; - sc->sg_stat[n_elem < 5 ? n_elem : 5]++; + cmd->nsg = urq->nsg; + memcpy(cmd->sgv, urq->sgv, sizeof(struct scatterlist) * cmd->nsg); /* * build the command @@ -843,7 +868,7 @@ static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, block = rq->sector >> lun->capacity.bshift; nblks = rq->nr_sectors >> lun->capacity.bshift; - cmd->cdb[0] = (ub_dir == UB_DIR_READ)? READ_10: WRITE_10; + cmd->cdb[0] = (cmd->dir == UB_DIR_READ)? READ_10: WRITE_10; /* 10-byte uses 4 bytes of LBA: 2147483648KB, 2097152MB, 2048GB */ cmd->cdb[2] = block >> 24; cmd->cdb[3] = block >> 16; @@ -854,14 +879,12 @@ static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, cmd->cdb_len = 10; cmd->len = rq->nr_sectors * 512; - - return 0; } -static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun, - struct ub_scsi_cmd *cmd, struct request *rq) +static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun, + struct ub_scsi_cmd *cmd, struct ub_request *urq) { - int n_elem; + struct request *rq = urq->rq; if (rq->data_len == 0) { cmd->dir = UB_DIR_NONE; @@ -870,40 +893,26 @@ static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun, cmd->dir = UB_DIR_WRITE; else cmd->dir = UB_DIR_READ; - } - /* - * get scatterlist from block layer - */ - n_elem = blk_rq_map_sg(lun->disk->queue, rq, &cmd->sgv[0]); - if (n_elem < 0) { - printk(KERN_INFO "%s: failed request map (%d)\n", - sc->name, n_elem); /* P3 */ - return -1; - } - if (n_elem > UB_MAX_REQ_SG) { /* Paranoia */ - printk(KERN_WARNING "%s: request with %d segments\n", - sc->name, n_elem); - return -1; - } - cmd->nsg = n_elem; - sc->sg_stat[n_elem < 5 ? n_elem : 5]++; + cmd->nsg = urq->nsg; + memcpy(cmd->sgv, urq->sgv, sizeof(struct scatterlist) * cmd->nsg); memcpy(&cmd->cdb, rq->cmd, rq->cmd_len); cmd->cdb_len = rq->cmd_len; cmd->len = rq->data_len; - - return 0; } static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) { - struct request *rq = cmd->back; struct ub_lun *lun = cmd->lun; + struct ub_request *urq = cmd->back; + struct request *rq; int uptodate; + rq = urq->rq; + if (cmd->error == 0) { uptodate = 1; @@ -924,9 +933,16 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) rq->errors = SAM_STAT_CHECK_CONDITION; else rq->errors = DID_ERROR << 16; + } else { + if (cmd->error == -EIO) { + if (ub_rw_cmd_retry(sc, lun, urq, cmd) == 0) + return; + } } } + urq->rq = NULL; + ub_put_cmd(lun, cmd); ub_end_rq(rq, uptodate); blk_start_queue(lun->disk->queue); @@ -941,6 +957,41 @@ static void ub_end_rq(struct request *rq, int uptodate) end_that_request_last(rq); } +static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun, + struct ub_request *urq, struct ub_scsi_cmd *cmd) +{ + + if (atomic_read(&sc->poison)) + return -ENXIO; + + ub_reset_enter(sc); + + if (urq->current_try >= 3) + return -EIO; + urq->current_try++; + /* P3 */ printk("%s: dir %c len/act %d/%d " + "[sense %x %02x %02x] retry %d\n", + sc->name, UB_DIR_CHAR(cmd->dir), cmd->len, cmd->act_len, + cmd->key, cmd->asc, cmd->ascq, urq->current_try); + + memset(cmd, 0, sizeof(struct ub_scsi_cmd)); + ub_cmd_build_block(sc, lun, cmd, urq); + + cmd->state = UB_CMDST_INIT; + cmd->lun = lun; + cmd->done = ub_rw_cmd_done; + cmd->back = urq; + + cmd->tag = sc->tagcnt++; + +#if 0 /* Wasteful */ + return ub_submit_scsi(sc, cmd); +#else + ub_cmdq_add(sc, cmd); + return 0; +#endif +} + /* * Submit a regular SCSI operation (not an auto-sense). * @@ -1071,7 +1122,7 @@ static void ub_scsi_dispatch(struct ub_dev *sc) struct ub_scsi_cmd *cmd; int rc; - while ((cmd = ub_cmdq_peek(sc)) != NULL) { + while (!sc->reset && (cmd = ub_cmdq_peek(sc)) != NULL) { if (cmd->state == UB_CMDST_DONE) { ub_cmdq_pop(sc); (*cmd->done)(sc, cmd); @@ -1094,11 +1145,12 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) { struct urb *urb = &sc->work_urb; struct bulk_cs_wrap *bcs; + int len; int rc; if (atomic_read(&sc->poison)) { - /* A little too simplistic, I feel... */ - goto Bad_End; + ub_state_done(sc, cmd, -ENODEV); + return; } if (cmd->state == UB_CMDST_CLEAR) { @@ -1106,7 +1158,6 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) /* * STALL while clearning STALL. * The control pipe clears itself - nothing to do. - * XXX Might try to reset the device here and retry. */ printk(KERN_NOTICE "%s: stall on control pipe\n", sc->name); @@ -1125,11 +1176,6 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) } else if (cmd->state == UB_CMDST_CLR2STS) { if (urb->status == -EPIPE) { - /* - * STALL while clearning STALL. - * The control pipe clears itself - nothing to do. - * XXX Might try to reset the device here and retry. - */ printk(KERN_NOTICE "%s: stall on control pipe\n", sc->name); goto Bad_End; @@ -1147,11 +1193,6 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) } else if (cmd->state == UB_CMDST_CLRRS) { if (urb->status == -EPIPE) { - /* - * STALL while clearning STALL. - * The control pipe clears itself - nothing to do. - * XXX Might try to reset the device here and retry. - */ printk(KERN_NOTICE "%s: stall on control pipe\n", sc->name); goto Bad_End; @@ -1168,7 +1209,12 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) ub_state_stat_counted(sc, cmd); } else if (cmd->state == UB_CMDST_CMD) { - if (urb->status == -EPIPE) { + switch (urb->status) { + case 0: + break; + case -EOVERFLOW: + goto Bad_End; + case -EPIPE: rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe); if (rc != 0) { printk(KERN_NOTICE "%s: " @@ -1178,17 +1224,20 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) * This is typically ENOMEM or some other such shit. * Retrying is pointless. Just do Bad End on it... */ - goto Bad_End; + ub_state_done(sc, cmd, rc); + return; } cmd->state = UB_CMDST_CLEAR; ub_cmdtr_state(sc, cmd); return; - } - if (urb->status != 0) { + case -ESHUTDOWN: /* unplug */ + case -EILSEQ: /* unplug timeout on uhci */ + ub_state_done(sc, cmd, -ENODEV); + return; + default: goto Bad_End; } if (urb->actual_length != US_BULK_CB_WRAP_LEN) { - /* XXX Must do reset here to unconfuse the device */ goto Bad_End; } @@ -1207,11 +1256,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) printk(KERN_NOTICE "%s: " "unable to submit clear (%d)\n", sc->name, rc); - /* - * This is typically ENOMEM or some other such shit. - * Retrying is pointless. Just do Bad End on it... - */ - goto Bad_End; + ub_state_done(sc, cmd, rc); + return; } cmd->state = UB_CMDST_CLR2STS; ub_cmdtr_state(sc, cmd); @@ -1220,14 +1266,50 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) if (urb->status == -EOVERFLOW) { /* * A babble? Failure, but we must transfer CSW now. - * XXX This is going to end in perpetual babble. Reset. */ cmd->error = -EOVERFLOW; /* A cheap trick... */ ub_state_stat(sc, cmd); return; } - if (urb->status != 0) - goto Bad_End; + + if (cmd->dir == UB_DIR_WRITE) { + /* + * Do not continue writes in case of a failure. + * Doing so would cause sectors to be mixed up, + * which is worse than sectors lost. + * + * We must try to read the CSW, or many devices + * get confused. + */ + len = urb->actual_length; + if (urb->status != 0 || + len != cmd->sgv[cmd->current_sg].length) { + cmd->act_len += len; + ub_cmdtr_act_len(sc, cmd); + + cmd->error = -EIO; + ub_state_stat(sc, cmd); + return; + } + + } else { + /* + * If an error occurs on read, we record it, and + * continue to fetch data in order to avoid bubble. + * + * As a small shortcut, we stop if we detect that + * a CSW mixed into data. + */ + if (urb->status != 0) + cmd->error = -EIO; + + len = urb->actual_length; + if (urb->status != 0 || + len != cmd->sgv[cmd->current_sg].length) { + if ((len & 0x1FF) == US_BULK_CS_WRAP_LEN) + goto Bad_End; + } + } cmd->act_len += urb->actual_length; ub_cmdtr_act_len(sc, cmd); @@ -1245,11 +1327,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) printk(KERN_NOTICE "%s: " "unable to submit clear (%d)\n", sc->name, rc); - /* - * This is typically ENOMEM or some other such shit. - * Retrying is pointless. Just do Bad End on it... - */ - goto Bad_End; + ub_state_done(sc, cmd, rc); + return; } /* @@ -1262,14 +1341,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) ub_cmdtr_state(sc, cmd); return; } - if (urb->status == -EOVERFLOW) { - /* - * XXX We are screwed here. Retrying is pointless, - * because the pipelined data will not get in until - * we read with a big enough buffer. We must reset XXX. - */ - goto Bad_End; - } + + /* Catch everything, including -EOVERFLOW and other nasties. */ if (urb->status != 0) goto Bad_End; @@ -1315,15 +1388,15 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) return; } - rc = le32_to_cpu(bcs->Residue); - if (rc != cmd->len - cmd->act_len) { + len = le32_to_cpu(bcs->Residue); + if (len != cmd->len - cmd->act_len) { /* * It is all right to transfer less, the caller has * to check. But it's not all right if the device * counts disagree with our counts. */ /* P3 */ printk("%s: resid %d len %d act %d\n", - sc->name, rc, cmd->len, cmd->act_len); + sc->name, len, cmd->len, cmd->act_len); goto Bad_End; } @@ -1334,13 +1407,13 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) ub_state_sense(sc, cmd); return; case US_BULK_STAT_PHASE: - /* XXX We must reset the transport here */ /* P3 */ printk("%s: status PHASE\n", sc->name); goto Bad_End; default: printk(KERN_INFO "%s: unknown CSW status 0x%x\n", sc->name, bcs->Status); - goto Bad_End; + ub_state_done(sc, cmd, -EINVAL); + return; } /* Not zeroing error to preserve a babble indicator */ @@ -1360,7 +1433,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) printk(KERN_WARNING "%s: " "wrong command state %d\n", sc->name, cmd->state); - goto Bad_End; + ub_state_done(sc, cmd, -EINVAL); + return; } return; @@ -1608,6 +1682,93 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd) } /* + * Reset management + */ + +static void ub_reset_enter(struct ub_dev *sc) +{ + + if (sc->reset) { + /* This happens often on multi-LUN devices. */ + return; + } + sc->reset = 1; + +#if 0 /* Not needed because the disconnect waits for us. */ + unsigned long flags; + spin_lock_irqsave(&ub_lock, flags); + sc->openc++; + spin_unlock_irqrestore(&ub_lock, flags); +#endif + +#if 0 /* We let them stop themselves. */ + struct list_head *p; + struct ub_lun *lun; + list_for_each(p, &sc->luns) { + lun = list_entry(p, struct ub_lun, link); + blk_stop_queue(lun->disk->queue); + } +#endif + + schedule_work(&sc->reset_work); +} + +static void ub_reset_task(void *arg) +{ + struct ub_dev *sc = arg; + unsigned long flags; + struct list_head *p; + struct ub_lun *lun; + int lkr, rc; + + if (!sc->reset) { + printk(KERN_WARNING "%s: Running reset unrequested\n", + sc->name); + return; + } + + if (atomic_read(&sc->poison)) { + printk(KERN_NOTICE "%s: Not resetting disconnected device\n", + sc->name); /* P3 This floods. Remove soon. XXX */ + } else if (sc->dev->actconfig->desc.bNumInterfaces != 1) { + printk(KERN_NOTICE "%s: Not resetting multi-interface device\n", + sc->name); /* P3 This floods. Remove soon. XXX */ + } else { + if ((lkr = usb_lock_device_for_reset(sc->dev, sc->intf)) < 0) { + printk(KERN_NOTICE + "%s: usb_lock_device_for_reset failed (%d)\n", + sc->name, lkr); + } else { + rc = usb_reset_device(sc->dev); + if (rc < 0) { + printk(KERN_NOTICE "%s: " + "usb_lock_device_for_reset failed (%d)\n", + sc->name, rc); + } + + if (lkr) + usb_unlock_device(sc->dev); + } + } + + /* + * In theory, no commands can be running while reset is active, + * so nobody can ask for another reset, and so we do not need any + * queues of resets or anything. We do need a spinlock though, + * to interact with block layer. + */ + spin_lock_irqsave(&sc->lock, flags); + sc->reset = 0; + tasklet_schedule(&sc->tasklet); + list_for_each(p, &sc->luns) { + lun = list_entry(p, struct ub_lun, link); + blk_start_queue(lun->disk->queue); + } + wake_up(&sc->reset_wait); + spin_unlock_irqrestore(&sc->lock, flags); +} + +/* * This is called from a process context. */ static void ub_revalidate(struct ub_dev *sc, struct ub_lun *lun) @@ -2142,7 +2303,7 @@ static int ub_get_pipes(struct ub_dev *sc, struct usb_device *dev, if (ep_in == NULL || ep_out == NULL) { printk(KERN_NOTICE "%s: failed endpoint check\n", sc->name); - return -EIO; + return -ENODEV; } /* Calculate and store the pipe values */ @@ -2180,6 +2341,8 @@ static int ub_probe(struct usb_interface *intf, usb_init_urb(&sc->work_urb); tasklet_init(&sc->tasklet, ub_scsi_action, (unsigned long)sc); atomic_set(&sc->poison, 0); + INIT_WORK(&sc->reset_work, ub_reset_task, sc); + init_waitqueue_head(&sc->reset_wait); init_timer(&sc->work_timer); sc->work_timer.data = (unsigned long) sc; @@ -2200,7 +2363,8 @@ static int ub_probe(struct usb_interface *intf, /* XXX Verify that we can handle the device (from descriptors) */ - ub_get_pipes(sc, sc->dev, intf); + if (ub_get_pipes(sc, sc->dev, intf) != 0) + goto err_dev_desc; if (device_create_file(&sc->intf->dev, &dev_attr_diag) != 0) goto err_diag; @@ -2271,6 +2435,7 @@ static int ub_probe(struct usb_interface *intf, /* device_remove_file(&sc->intf->dev, &dev_attr_diag); */ err_diag: +err_dev_desc: usb_set_intfdata(intf, NULL); // usb_put_intf(sc->intf); usb_put_dev(sc->dev); @@ -2379,6 +2544,11 @@ static void ub_disconnect(struct usb_interface *intf) atomic_set(&sc->poison, 1); /* + * Wait for reset to end, if any. + */ + wait_event(sc->reset_wait, !sc->reset); + + /* * Blow away queued commands. * * Actually, this never works, because before we get here @@ -2391,7 +2561,7 @@ static void ub_disconnect(struct usb_interface *intf) { struct ub_scsi_cmd *cmd; int cnt = 0; - while ((cmd = ub_cmdq_pop(sc)) != NULL) { + while ((cmd = ub_cmdq_peek(sc)) != NULL) { cmd->error = -ENOTCONN; cmd->state = UB_CMDST_DONE; ub_cmdtr_state(sc, cmd); |