diff options
Diffstat (limited to 'drivers/ata/libata-eh.c')
-rw-r--r-- | drivers/ata/libata-eh.c | 96 |
1 files changed, 60 insertions, 36 deletions
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 7349c3dbf77..39f556c0299 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -982,26 +982,27 @@ static int ata_eh_read_log_10h(struct ata_device *dev, * RETURNS: * 0 on success, AC_ERR_* mask on failure */ -static unsigned int atapi_eh_request_sense(struct ata_device *dev, - unsigned char *sense_buf) +static unsigned int atapi_eh_request_sense(struct ata_queued_cmd *qc) { + struct ata_device *dev = qc->dev; + unsigned char *sense_buf = qc->scsicmd->sense_buffer; struct ata_port *ap = dev->ap; struct ata_taskfile tf; u8 cdb[ATAPI_CDB_LEN]; DPRINTK("ATAPI request sense\n"); - ata_tf_init(dev, &tf); - /* FIXME: is this needed? */ memset(sense_buf, 0, SCSI_SENSE_BUFFERSIZE); - /* XXX: why tf_read here? */ - ap->ops->tf_read(ap, &tf); - - /* fill these in, for the case where they are -not- overwritten */ + /* initialize sense_buf with the error register, + * for the case where they are -not- overwritten + */ sense_buf[0] = 0x70; - sense_buf[2] = tf.feature >> 4; + sense_buf[2] = qc->result_tf.feature >> 4; + + /* some devices time out if garbage left in tf */ + ata_tf_init(dev, &tf); memset(cdb, 0, ATAPI_CDB_LEN); cdb[0] = REQUEST_SENSE; @@ -1165,8 +1166,7 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc, case ATA_DEV_ATAPI: if (!(qc->ap->pflags & ATA_PFLAG_FROZEN)) { - tmp = atapi_eh_request_sense(qc->dev, - qc->scsicmd->sense_buffer); + tmp = atapi_eh_request_sense(qc); if (!tmp) { /* ATA_QCFLAG_SENSE_VALID is used to * tell atapi_qc_complete() that sense @@ -1625,8 +1625,14 @@ static int ata_eh_reset(struct ata_port *ap, int classify, rc = prereset(ap); if (rc) { if (rc == -ENOENT) { - ata_port_printk(ap, KERN_DEBUG, "port disabled. ignoring.\n"); + ata_port_printk(ap, KERN_DEBUG, + "port disabled. ignoring.\n"); ap->eh_context.i.action &= ~ATA_EH_RESET_MASK; + + for (i = 0; i < ATA_MAX_DEVICES; i++) + classes[i] = ATA_DEV_NONE; + + rc = 0; } else ata_port_printk(ap, KERN_ERR, "prereset failed (errno=%d)\n", rc); @@ -1737,12 +1743,17 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, { struct ata_eh_context *ehc = &ap->eh_context; struct ata_device *dev; + unsigned int new_mask = 0; unsigned long flags; int i, rc = 0; DPRINTK("ENTER\n"); - for (i = 0; i < ATA_MAX_DEVICES; i++) { + /* For PATA drive side cable detection to work, IDENTIFY must + * be done backwards such that PDIAG- is released by the slave + * device before the master device is identified. + */ + for (i = ATA_MAX_DEVICES - 1; i >= 0; i--) { unsigned int action, readid_flags = 0; dev = &ap->device[i]; @@ -1754,13 +1765,13 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, if (action & ATA_EH_REVALIDATE && ata_dev_ready(dev)) { if (ata_port_offline(ap)) { rc = -EIO; - break; + goto err; } ata_eh_about_to_do(ap, dev, ATA_EH_REVALIDATE); rc = ata_dev_revalidate(dev, readid_flags); if (rc) - break; + goto err; ata_eh_done(ap, dev, ATA_EH_REVALIDATE); @@ -1778,40 +1789,53 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, rc = ata_dev_read_id(dev, &dev->class, readid_flags, dev->id); - if (rc == 0) { - ehc->i.flags |= ATA_EHI_PRINTINFO; - rc = ata_dev_configure(dev); - ehc->i.flags &= ~ATA_EHI_PRINTINFO; - } else if (rc == -ENOENT) { + switch (rc) { + case 0: + new_mask |= 1 << i; + break; + case -ENOENT: /* IDENTIFY was issued to non-existent * device. No need to reset. Just * thaw and kill the device. */ ata_eh_thaw_port(ap); dev->class = ATA_DEV_UNKNOWN; - rc = 0; - } - - if (rc) { - dev->class = ATA_DEV_UNKNOWN; break; + default: + dev->class = ATA_DEV_UNKNOWN; + goto err; } + } + } - if (ata_dev_enabled(dev)) { - spin_lock_irqsave(ap->lock, flags); - ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG; - spin_unlock_irqrestore(ap->lock, flags); + /* Configure new devices forward such that user doesn't see + * device detection messages backwards. + */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; - /* new device discovered, configure xfermode */ - ehc->i.flags |= ATA_EHI_SETMODE; - } - } + if (!(new_mask & (1 << i))) + continue; + + ehc->i.flags |= ATA_EHI_PRINTINFO; + rc = ata_dev_configure(dev); + ehc->i.flags &= ~ATA_EHI_PRINTINFO; + if (rc) + goto err; + + spin_lock_irqsave(ap->lock, flags); + ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG; + spin_unlock_irqrestore(ap->lock, flags); + + /* new device discovered, configure xfermode */ + ehc->i.flags |= ATA_EHI_SETMODE; } - if (rc) - *r_failed_dev = dev; + return 0; - DPRINTK("EXIT\n"); + err: + *r_failed_dev = dev; + DPRINTK("EXIT rc=%d\n", rc); return rc; } |