diff options
Diffstat (limited to 'arch')
34 files changed, 47 insertions, 54 deletions
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 9abcd5fd896..01b10ab588a 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -532,8 +532,8 @@ config SMP singleprocessor machines. On a singleprocessor machine, the kernel will run faster if you say N here. - See also the <file:Documentation/smp.txt>, and the SMP-HOWTO - available at <http://www.tldp.org/docs.html#howto>. + See also the SMP-HOWTO available at + <http://www.tldp.org/docs.html#howto>. If you don't know what to do here, say N. diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 36176f40dfd..471637002e8 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -635,8 +635,7 @@ config SMP processor machines. On a single processor machine, the kernel will run faster if you say N here. - See also the <file:Documentation/smp.txt>, - <file:Documentation/i386/IO-APIC.txt>, + See also <file:Documentation/i386/IO-APIC.txt>, <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at <http://www.linuxdoc.org/docs.html#howto>. diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c index efba65edcd5..31706224a04 100644 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ b/arch/arm/mach-pxa/corgi_ssp.c @@ -32,7 +32,7 @@ static struct corgissp_machinfo *ssp_machinfo; /* * There are three devices connected to the SSP interface: * 1. A touchscreen controller (TI ADS7846 compatible) - * 2. An LCD contoller (with some Backlight functionality) + * 2. An LCD controller (with some Backlight functionality) * 3. A battery monitoring IC (Maxim MAX1111) * * Each device uses a different speed/mode of communication. diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c index 1e25b1d19fc..94620be7bfa 100644 --- a/arch/arm/mach-sa1100/collie_pm.c +++ b/arch/arm/mach-sa1100/collie_pm.c @@ -165,7 +165,7 @@ int collie_read_temp(void) ucb1x00_adc_enable(ucb); ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_TMP_ON, 0); - /* >1010 = battery removed, 460 = 22C ?, higer = lower temp ? */ + /* >1010 = battery removed, 460 = 22C ?, higher = lower temp ? */ voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD0, UCB_SYNC); ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_TMP_ON); ucb1x00_adc_disable(ucb); diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c index d486f511256..ae2c5d7efc9 100644 --- a/arch/arm/plat-s3c24xx/irq.c +++ b/arch/arm/plat-s3c24xx/irq.c @@ -47,7 +47,7 @@ * Mark IRQ_LCD valid * * 25-Jul-2005 Ben Dooks - * Split the S3C2440 IRQ code to seperate file + * Split the S3C2440 IRQ code to separate file */ #include <linux/init.h> diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig index 68380cb2ff8..bf0468cbe71 100644 --- a/arch/frv/Kconfig +++ b/arch/frv/Kconfig @@ -79,7 +79,7 @@ config FRV_OUTOFLINE_ATOMIC_OPS Setting this option causes the FR-V atomic operations to be mostly implemented out-of-line. - See Documentation/fujitsu/frv/atomic-ops.txt for more information. + See Documentation/frv/atomic-ops.txt for more information. config HIGHMEM bool "High memory support" diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S index f926c709477..99046b1f51c 100644 --- a/arch/frv/kernel/entry.S +++ b/arch/frv/kernel/entry.S @@ -253,7 +253,7 @@ __entry_kernel_external_interrupt_reentry: andi.p gr5,#~PSR_ET,gr5 # set CCCR.CC3 to Undefined to abort atomic-modify completion inside the kernel - # - for an explanation of how it works, see: Documentation/fujitsu/frv/atomic-ops.txt + # - for an explanation of how it works, see: Documentation/frv/atomic-ops.txt andi gr25,#~0xc0,gr25 sti gr20,@(gr28,#REG_TBR) @@ -445,7 +445,7 @@ __entry_kernel_softprog_interrupt_reentry: sti gr22,@(sp,#REG_SP) # set CCCR.CC3 to Undefined to abort atomic-modify completion inside the kernel - # - for an explanation of how it works, see: Documentation/fujitsu/frv/atomic-ops.txt + # - for an explanation of how it works, see: Documentation/frv/atomic-ops.txt movsg cccr,gr20 andi gr20,#~0xc0,gr20 movgs gr20,cccr diff --git a/arch/frv/lib/atomic-ops.S b/arch/frv/lib/atomic-ops.S index 545cd325ac5..ee0ac905fb0 100644 --- a/arch/frv/lib/atomic-ops.S +++ b/arch/frv/lib/atomic-ops.S @@ -1,7 +1,7 @@ /* atomic-ops.S: kernel atomic operations * * For an explanation of how atomic ops work in this arch, see: - * Documentation/fujitsu/frv/atomic-ops.txt + * Documentation/frv/atomic-ops.txt * * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) diff --git a/arch/h8300/platform/h8s/ints.c b/arch/h8300/platform/h8s/ints.c index 551fd5f30d8..ac10b978385 100644 --- a/arch/h8300/platform/h8s/ints.c +++ b/arch/h8300/platform/h8s/ints.c @@ -121,7 +121,7 @@ void __init init_IRQ(void) printk("virtual vector at 0x%08lx\n",(unsigned long)ramvec); #if defined(CONFIG_GDB_DEBUG) - /* save orignal break vector */ + /* save original break vector */ break_vec = ramvec[TRAP3_VEC]; #else break_vec = VECTOR(trace_break); diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index a0740fbd94d..b0de1132dfc 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -285,8 +285,8 @@ config SMP single processor systems. On a single processor system, the kernel will run faster if you say N here. - See also the <file:Documentation/smp.txt> and the SMP-HOWTO - available at <http://www.tldp.org/docs.html#howto>. + See also the SMP-HOWTO available at + <http://www.tldp.org/docs.html#howto>. If you don't know what to do here, say N. diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index 12259759a2f..795180b8fd8 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -303,8 +303,7 @@ config SMP Y to "Enhanced Real Time Clock Support", below. The "Advanced Power Management" code will be disabled if you say Y here. - See also the <file:Documentation/smp.txt>, - and the SMP-HOWTO available at + See also the SMP-HOWTO available at <http://www.linuxdoc.org/docs.html#howto>. If you don't know what to do here, say N. diff --git a/arch/m32r/kernel/ptrace.c b/arch/m32r/kernel/ptrace.c index ed4d0756c5d..9aa615d3a5b 100644 --- a/arch/m32r/kernel/ptrace.c +++ b/arch/m32r/kernel/ptrace.c @@ -476,7 +476,7 @@ unregister_debug_trap(struct task_struct *child, unsigned long addr, return 0; } - /* Recover orignal instruction code. */ + /* Recover original instruction code. */ *code = p->insn[i]; /* Shift debug trap entries. */ diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index d38ebd3b120..ec78a5762e9 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1755,8 +1755,8 @@ config SMP People using multiprocessor machines who say Y here should also say Y to "Enhanced Real Time Clock Support", below. - See also the <file:Documentation/smp.txt> and the SMP-HOWTO - available at <http://www.tldp.org/docs.html#howto>. + See also the SMP-HOWTO available at + <http://www.tldp.org/docs.html#howto>. If you don't know what to do here, say N. diff --git a/arch/mips/au1000/mtx-1/board_setup.c b/arch/mips/au1000/mtx-1/board_setup.c index abfc4bcddf7..310d5dff89f 100644 --- a/arch/mips/au1000/mtx-1/board_setup.c +++ b/arch/mips/au1000/mtx-1/board_setup.c @@ -99,7 +99,7 @@ mtx1_pci_idsel(unsigned int devsel, int assert) #endif if (assert && devsel != 0) { - // supress signal to cardbus + // suppress signal to cardbus au_writel( 0x00000002, SYS_OUTPUTCLR ); // set EXT_IO3 OFF } else { diff --git a/arch/mips/kernel/binfmt_elfn32.c b/arch/mips/kernel/binfmt_elfn32.c index 9b34238d41c..77db3473dea 100644 --- a/arch/mips/kernel/binfmt_elfn32.c +++ b/arch/mips/kernel/binfmt_elfn32.c @@ -98,7 +98,7 @@ static __inline__ void jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value) { /* - * Convert jiffies to nanoseconds and seperate with + * Convert jiffies to nanoseconds and separate with * one divide. */ u64 nsec = (u64)jiffies * TICK_NSEC; diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c index da41eac195c..08f4cd781ee 100644 --- a/arch/mips/kernel/binfmt_elfo32.c +++ b/arch/mips/kernel/binfmt_elfo32.c @@ -100,7 +100,7 @@ static inline void jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value) { /* - * Convert jiffies to nanoseconds and seperate with + * Convert jiffies to nanoseconds and separate with * one divide. */ u64 nsec = (u64)jiffies * TICK_NSEC; diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c index f6704ab1630..998c4efcce8 100644 --- a/arch/mips/kernel/kspd.c +++ b/arch/mips/kernel/kspd.c @@ -221,7 +221,7 @@ void sp_work_handle_request(void) } } - /* Run the syscall at the priviledge of the user who loaded the + /* Run the syscall at the privilege of the user who loaded the SP program */ if (vpe_getuid(tclimit)) diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 269c252d956..c032409cba9 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -424,13 +424,13 @@ static void __init bootmem_init(void) #endif /* CONFIG_SGI_IP27 */ /* - * arch_mem_init - initialize memory managment subsystem + * arch_mem_init - initialize memory management subsystem * * o plat_mem_setup() detects the memory configuration and will record detected * memory areas using add_memory_region. * * At this stage the memory configuration of the system is known to the - * kernel but generic memory managment system is still entirely uninitialized. + * kernel but generic memory management system is still entirely uninitialized. * * o bootmem_init() * o sparse_init() diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 85f700e5813..b42e71c7111 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -65,7 +65,7 @@ asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS]; static atomic_t ipi_timer_latch[NR_CPUS]; /* - * Number of InterProcessor Interupt (IPI) message buffers to allocate + * Number of InterProcessor Interrupt (IPI) message buffers to allocate */ #define IPIBUF_PER_CPU 4 @@ -780,7 +780,7 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) { if (type == SMTC_CLOCK_TICK) atomic_inc(&ipi_timer_latch[cpu]); - /* If not on same VPE, enqueue and send cross-VPE interupt */ + /* If not on same VPE, enqueue and send cross-VPE interrupt */ smtc_ipi_nq(&IPIQ[cpu], pipi); LOCK_CORE_PRA(); settc(cpu_data[cpu].tc_id); @@ -1063,7 +1063,7 @@ static void setup_cross_vpe_interrupts(unsigned int nvpe) return; if (!cpu_has_vint) - panic("SMTC Kernel requires Vectored Interupt support"); + panic("SMTC Kernel requires Vectored Interrupt support"); set_vi_handler(MIPS_CPU_IPI_IRQ, ipi_irq_dispatch); diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 02bd180f0e0..53ec05267a9 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -1101,7 +1101,7 @@ static void __init setup_scache(void) /* * Do the probing thing on R4000SC and R4400SC processors. Other * processors don't have a S-cache that would be relevant to the - * Linux memory managment. + * Linux memory management. */ switch (c->cputype) { case CPU_R4000SC: diff --git a/arch/mips/sgi-ip27/ip27-hubio.c b/arch/mips/sgi-ip27/ip27-hubio.c index 524b371f939..a1fa4abb3f6 100644 --- a/arch/mips/sgi-ip27/ip27-hubio.c +++ b/arch/mips/sgi-ip27/ip27-hubio.c @@ -168,7 +168,7 @@ static void hub_set_piomode(nasid_t nasid) } /* - * hub_pio_init - PIO-related hub initalization + * hub_pio_init - PIO-related hub initialization * * @hub: hubinfo structure for our hub */ diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 25c10fa6964..028d8a0fdbf 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -206,9 +206,8 @@ config SMP singleprocessor machines. On a singleprocessor machine, the kernel will run faster if you say N here. - See also the <file:Documentation/smp.txt>, - <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available - at <http://www.tldp.org/docs.html#howto>. + See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO + available at <http://www.tldp.org/docs.html#howto>. If you don't know what to do here, say N. diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c index 395bbce6499..e10d25d2d9c 100644 --- a/arch/parisc/kernel/cache.c +++ b/arch/parisc/kernel/cache.c @@ -305,7 +305,7 @@ flush_user_cache_page_non_current(struct vm_area_struct *vma, /* save the current process space and pgd */ unsigned long space = mfsp(3), pgd = mfctl(25); - /* we don't mind taking interrups since they may not + /* we don't mind taking interrupts since they may not * do anything with user space, but we can't * be preempted here */ preempt_disable(); diff --git a/arch/parisc/kernel/hardware.c b/arch/parisc/kernel/hardware.c index 04848b2b381..84b9611a922 100644 --- a/arch/parisc/kernel/hardware.c +++ b/arch/parisc/kernel/hardware.c @@ -1187,7 +1187,7 @@ static struct hp_hardware hp_hardware_list[] __devinitdata = { {HPHW_FIO, 0x005, 0x000A9, 0x00, "AllegroLow Core PCI USB KB"}, {HPHW_FIO, 0x006, 0x000A9, 0x00, "AllegroHigh Core PCI SuperIO RS-232"}, {HPHW_FIO, 0x006, 0x000A9, 0x00, "AllegroHigh Core PCI USB KB"}, - {HPHW_FIO, 0x007, 0x000A9, 0x0, "Miscelaneous PCI Plug-in"}, + {HPHW_FIO, 0x007, 0x000A9, 0x0, "Miscellaneous PCI Plug-in"}, {HPHW_FIO, 0x00A, 0x000A9, 0x0, "Lego 360 Core PCI SuperIO RS-232"}, {HPHW_FIO, 0x00A, 0x000A9, 0x0, "Lego 360 Core PCI USB KB"}, {HPHW_FIO, 0x004, 0x00320, 0x0, "Metheus Frame Buffer"}, diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c index 2ce3806f02e..58fccc96d00 100644 --- a/arch/parisc/kernel/signal.c +++ b/arch/parisc/kernel/signal.c @@ -333,7 +333,7 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, flush_user_icache_range((unsigned long) &frame->tramp[0], (unsigned long) &frame->tramp[TRAMP_SIZE]); - /* TRAMP Words 0-4, Lenght 5 = SIGRESTARTBLOCK_TRAMP + /* TRAMP Words 0-4, Length 5 = SIGRESTARTBLOCK_TRAMP * TRAMP Words 5-9, Length 4 = SIGRETURN_TRAMP * So the SIGRETURN_TRAMP is at the end of SIGRESTARTBLOCK_TRAMP */ diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 974f9c3e89d..82cbffd0365 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -83,8 +83,8 @@ config SMP singleprocessor machines. On a singleprocessor machine, the kernel will run faster if you say N here. - See also the <file:Documentation/smp.txt> and the SMP-HOWTO - available at <http://www.tldp.org/docs.html#howto>. + See also the SMP-HOWTO available at + <http://www.tldp.org/docs.html#howto>. Even if you don't know what to do here, say Y. diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index bfbd54a22bd..1c3a90835c7 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -673,9 +673,8 @@ config SMP People using multiprocessor machines who say Y here should also say Y to "Enhanced Real Time Clock Support", below. - See also the <file:Documentation/smp.txt>, - <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available - at <http://www.tldp.org/docs.html#howto>. + See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO + available at <http://www.tldp.org/docs.html#howto>. If you don't know what to do here, say N. diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 51008a2ba5b..99f8971716d 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -48,9 +48,8 @@ config SMP Y to "Enhanced Real Time Clock Support", below. The "Advanced Power Management" code will be disabled if you say Y here. - See also the <file:Documentation/smp.txt>, - <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at - <http://www.tldp.org/docs.html#howto>. + See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO + available at <http://www.tldp.org/docs.html#howto>. If you don't know what to do here, say N. diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c index 97aa50d1e4a..ad0ede24ca1 100644 --- a/arch/sparc/kernel/ioport.c +++ b/arch/sparc/kernel/ioport.c @@ -305,7 +305,7 @@ void *sbus_alloc_consistent(struct sbus_dev *sdev, long len, u32 *dma_addrp) struct resource *res; int order; - /* XXX why are some lenghts signed, others unsigned? */ + /* XXX why are some lengths signed, others unsigned? */ if (len <= 0) { return NULL; } @@ -393,7 +393,7 @@ void sbus_free_consistent(struct sbus_dev *sdev, long n, void *p, u32 ba) */ dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *va, size_t len, int direction) { - /* XXX why are some lenghts signed, others unsigned? */ + /* XXX why are some lengths signed, others unsigned? */ if (len <= 0) { return 0; } diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index a7739b507b7..a8c6366f05a 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -168,9 +168,8 @@ config SMP Y to "Enhanced Real Time Clock Support", below. The "Advanced Power Management" code will be disabled if you say Y here. - See also the <file:Documentation/smp.txt>, - <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at - <http://www.tldp.org/docs.html#howto>. + See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO + available at <http://www.tldp.org/docs.html#howto>. If you don't know what to do here, say N. diff --git a/arch/um/sys-x86_64/signal.c b/arch/um/sys-x86_64/signal.c index 7457436b433..14070181407 100644 --- a/arch/um/sys-x86_64/signal.c +++ b/arch/um/sys-x86_64/signal.c @@ -112,7 +112,7 @@ static int copy_sc_to_user(struct sigcontext __user *to, err |= PUTREG(regs, RSI, to, si); err |= PUTREG(regs, RBP, to, bp); /* - * Must use orignal RSP, which is passed in, rather than what's in + * Must use original RSP, which is passed in, rather than what's in * the pt_regs, because that's already been updated to point at the * signal frame. */ diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 3162cb467ab..99af1272ab1 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -202,8 +202,7 @@ config SMP Y to "Enhanced Real Time Clock Support", below. The "Advanced Power Management" code will be disabled if you say Y here. - See also the <file:Documentation/smp.txt>, - <file:Documentation/i386/IO-APIC.txt>, + See also <file:Documentation/i386/IO-APIC.txt>, <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at <http://www.tldp.org/docs.html#howto>. diff --git a/arch/x86/lib/bitops_32.c b/arch/x86/lib/bitops_32.c index afd0045595d..b6544045985 100644 --- a/arch/x86/lib/bitops_32.c +++ b/arch/x86/lib/bitops_32.c @@ -2,7 +2,7 @@ #include <linux/module.h> /** - * find_next_bit - find the first set bit in a memory region + * find_next_bit - find the next set bit in a memory region * @addr: The address to base the search on * @offset: The bitnumber to start searching at * @size: The maximum size to search diff --git a/arch/x86/lib/bitops_64.c b/arch/x86/lib/bitops_64.c index 95b6d9639fb..0e8f491e6cc 100644 --- a/arch/x86/lib/bitops_64.c +++ b/arch/x86/lib/bitops_64.c @@ -58,7 +58,7 @@ long find_first_zero_bit(const unsigned long * addr, unsigned long size) } /** - * find_next_zero_bit - find the first zero bit in a memory region + * find_next_zero_bit - find the next zero bit in a memory region * @addr: The address to base the search on * @offset: The bitnumber to start searching at * @size: The maximum size to search |