summaryrefslogtreecommitdiffstats
path: root/arch/m68k/mac
diff options
context:
space:
mode:
Diffstat (limited to 'arch/m68k/mac')
-rw-r--r--arch/m68k/mac/baboon.c32
-rw-r--r--arch/m68k/mac/config.c167
-rw-r--r--arch/m68k/mac/debug.c331
-rw-r--r--arch/m68k/mac/oss.c18
-rw-r--r--arch/m68k/mac/psc.c21
-rw-r--r--arch/m68k/mac/via.c284
6 files changed, 441 insertions, 412 deletions
diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c
index a1c7ec70674..673a1085984 100644
--- a/arch/m68k/mac/baboon.c
+++ b/arch/m68k/mac/baboon.c
@@ -22,7 +22,7 @@
/* #define DEBUG_BABOON */
/* #define DEBUG_IRQS */
-int baboon_present,baboon_active;
+int baboon_present;
volatile struct baboon *baboon;
irqreturn_t baboon_irq(int, void *);
@@ -45,7 +45,6 @@ void __init baboon_init(void)
baboon = (struct baboon *) BABOON_BASE;
baboon_present = 1;
- baboon_active = 0;
printk("Baboon detected at %p\n", baboon);
}
@@ -66,26 +65,28 @@ void __init baboon_register_interrupts(void)
irqreturn_t baboon_irq(int irq, void *dev_id)
{
- int irq_bit,i;
+ int irq_bit, irq_num;
unsigned char events;
#ifdef DEBUG_IRQS
- printk("baboon_irq: mb_control %02X mb_ifr %02X mb_status %02X active %02X\n",
+ printk("baboon_irq: mb_control %02X mb_ifr %02X mb_status %02X\n",
(uint) baboon->mb_control, (uint) baboon->mb_ifr,
- (uint) baboon->mb_status, baboon_active);
+ (uint) baboon->mb_status);
#endif
if (!(events = baboon->mb_ifr & 0x07))
return IRQ_NONE;
- for (i = 0, irq_bit = 1 ; i < 3 ; i++, irq_bit <<= 1) {
- if (events & irq_bit/* & baboon_active*/) {
- baboon_active &= ~irq_bit;
- m68k_handle_int(IRQ_BABOON_0 + i);
- baboon_active |= irq_bit;
+ irq_num = IRQ_BABOON_0;
+ irq_bit = 1;
+ do {
+ if (events & irq_bit) {
baboon->mb_ifr &= ~irq_bit;
+ m68k_handle_int(irq_num);
}
- }
+ irq_bit <<= 1;
+ irq_num++;
+ } while(events >= irq_bit);
#if 0
if (baboon->mb_ifr & 0x02) macide_ack_intr(NULL);
/* for now we need to smash all interrupts */
@@ -95,21 +96,18 @@ irqreturn_t baboon_irq(int irq, void *dev_id)
}
void baboon_irq_enable(int irq) {
- int irq_idx = IRQ_IDX(irq);
-
#ifdef DEBUG_IRQUSE
printk("baboon_irq_enable(%d)\n", irq);
#endif
- baboon_active |= (1 << irq_idx);
+ /* FIXME: figure out how to mask and unmask baboon interrupt sources */
+ enable_irq(IRQ_NUBUS_C);
}
void baboon_irq_disable(int irq) {
- int irq_idx = IRQ_IDX(irq);
-
#ifdef DEBUG_IRQUSE
printk("baboon_irq_disable(%d)\n", irq);
#endif
- baboon_active &= ~(1 << irq_idx);
+ disable_irq(IRQ_NUBUS_C);
}
void baboon_irq_clear(int irq) {
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index 562b38d0018..5fd413246f8 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -59,15 +59,15 @@ extern struct mem_info m68k_ramdisk;
extern char m68k_command_line[CL_SIZE];
-void *mac_env; /* Loaded by the boot asm */
+void *mac_env; /* Loaded by the boot asm */
/* The phys. video addr. - might be bogus on some machines */
unsigned long mac_orig_videoaddr;
/* Mac specific timer functions */
-extern unsigned long mac_gettimeoffset (void);
-extern int mac_hwclk (int, struct rtc_time *);
-extern int mac_set_clock_mmss (unsigned long);
+extern unsigned long mac_gettimeoffset(void);
+extern int mac_hwclk(int, struct rtc_time *);
+extern int mac_set_clock_mmss(unsigned long);
extern int show_mac_interrupts(struct seq_file *, void *);
extern void iop_preinit(void);
extern void iop_init(void);
@@ -82,10 +82,6 @@ extern void mac_mksound(unsigned int, unsigned int);
extern void nubus_sweep_video(void);
-/* Mac specific debug functions (in debug.c) */
-extern void mac_debug_init(void);
-extern void mac_debugging_long(int, long);
-
static void mac_get_model(char *str);
static void mac_sched_init(irq_handler_t vector)
@@ -99,51 +95,52 @@ static void mac_sched_init(irq_handler_t vector)
int __init mac_parse_bootinfo(const struct bi_record *record)
{
- int unknown = 0;
- const u_long *data = record->data;
+ int unknown = 0;
+ const u_long *data = record->data;
- switch (record->tag) {
+ switch (record->tag) {
case BI_MAC_MODEL:
- mac_bi_data.id = *data;
- break;
+ mac_bi_data.id = *data;
+ break;
case BI_MAC_VADDR:
- mac_bi_data.videoaddr = *data;
- break;
+ mac_bi_data.videoaddr = *data;
+ break;
case BI_MAC_VDEPTH:
- mac_bi_data.videodepth = *data;
- break;
+ mac_bi_data.videodepth = *data;
+ break;
case BI_MAC_VROW:
- mac_bi_data.videorow = *data;
- break;
+ mac_bi_data.videorow = *data;
+ break;
case BI_MAC_VDIM:
- mac_bi_data.dimensions = *data;
- break;
+ mac_bi_data.dimensions = *data;
+ break;
case BI_MAC_VLOGICAL:
- mac_bi_data.videological = VIDEOMEMBASE + (*data & ~VIDEOMEMMASK);
- mac_orig_videoaddr = *data;
- break;
+ mac_bi_data.videological = VIDEOMEMBASE + (*data & ~VIDEOMEMMASK);
+ mac_orig_videoaddr = *data;
+ break;
case BI_MAC_SCCBASE:
- mac_bi_data.sccbase = *data;
- break;
+ mac_bi_data.sccbase = *data;
+ break;
case BI_MAC_BTIME:
- mac_bi_data.boottime = *data;
- break;
+ mac_bi_data.boottime = *data;
+ break;
case BI_MAC_GMTBIAS:
- mac_bi_data.gmtbias = *data;
- break;
+ mac_bi_data.gmtbias = *data;
+ break;
case BI_MAC_MEMSIZE:
- mac_bi_data.memsize = *data;
- break;
+ mac_bi_data.memsize = *data;
+ break;
case BI_MAC_CPUID:
- mac_bi_data.cpuid = *data;
- break;
- case BI_MAC_ROMBASE:
- mac_bi_data.rombase = *data;
- break;
+ mac_bi_data.cpuid = *data;
+ break;
+ case BI_MAC_ROMBASE:
+ mac_bi_data.rombase = *data;
+ break;
default:
- unknown = 1;
- }
- return(unknown);
+ unknown = 1;
+ break;
+ }
+ return unknown;
}
/*
@@ -155,6 +152,7 @@ int __init mac_parse_bootinfo(const struct bi_record *record)
static void mac_cache_card_flush(int writeback)
{
unsigned long flags;
+
local_irq_save(flags);
via_flush_cache();
local_irq_restore(flags);
@@ -162,28 +160,24 @@ static void mac_cache_card_flush(int writeback)
void __init config_mac(void)
{
- if (!MACH_IS_MAC) {
- printk(KERN_ERR "ERROR: no Mac, but config_mac() called!! \n");
- }
+ if (!MACH_IS_MAC)
+ printk(KERN_ERR "ERROR: no Mac, but config_mac() called!! \n");
- mach_sched_init = mac_sched_init;
- mach_init_IRQ = mac_init_IRQ;
- mach_get_model = mac_get_model;
- mach_gettimeoffset = mac_gettimeoffset;
+ mach_sched_init = mac_sched_init;
+ mach_init_IRQ = mac_init_IRQ;
+ mach_get_model = mac_get_model;
+ mach_gettimeoffset = mac_gettimeoffset;
#warning move to adb/via init
#if 0
- mach_hwclk = mac_hwclk;
+ mach_hwclk = mac_hwclk;
#endif
- mach_set_clock_mmss = mac_set_clock_mmss;
- mach_reset = mac_reset;
- mach_halt = mac_poweroff;
- mach_power_off = mac_poweroff;
+ mach_set_clock_mmss = mac_set_clock_mmss;
+ mach_reset = mac_reset;
+ mach_halt = mac_poweroff;
+ mach_power_off = mac_poweroff;
mach_max_dma_address = 0xffffffff;
-#if 0
- mach_debug_init = mac_debug_init;
-#endif
#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
- mach_beep = mac_mksound;
+ mach_beep = mac_mksound;
#endif
#ifdef CONFIG_HEARTBEAT
#if 0
@@ -199,21 +193,22 @@ void __init config_mac(void)
mac_identify();
mac_report_hardware();
- /* AFAIK only the IIci takes a cache card. The IIfx has onboard
- cache ... someone needs to figure out how to tell if it's on or
- not. */
+ /*
+ * AFAIK only the IIci takes a cache card. The IIfx has onboard
+ * cache ... someone needs to figure out how to tell if it's on or
+ * not.
+ */
if (macintosh_config->ident == MAC_MODEL_IICI
- || macintosh_config->ident == MAC_MODEL_IIFX) {
+ || macintosh_config->ident == MAC_MODEL_IIFX)
mach_l2_flush = mac_cache_card_flush;
- }
/*
* Check for machine specific fixups.
*/
#ifdef OLD_NUBUS_CODE
- nubus_sweep_video();
+ nubus_sweep_video();
#endif
}
@@ -233,8 +228,7 @@ void __init config_mac(void)
struct mac_model *macintosh_config;
EXPORT_SYMBOL(macintosh_config);
-static struct mac_model mac_data_table[]=
-{
+static struct mac_model mac_data_table[] = {
/*
* We'll pretend to be a Macintosh II, that's pretty safe.
*/
@@ -784,12 +778,12 @@ void mac_identify(void)
if (!model) {
/* no bootinfo model id -> NetBSD booter was used! */
/* XXX FIXME: breaks for model > 31 */
- model=(mac_bi_data.cpuid>>2)&63;
- printk (KERN_WARNING "No bootinfo model ID, using cpuid instead (hey, use Penguin!)\n");
+ model = (mac_bi_data.cpuid >> 2) & 63;
+ printk(KERN_WARNING "No bootinfo model ID, using cpuid instead (hey, use Penguin!)\n");
}
macintosh_config = mac_data_table;
- for (m = macintosh_config ; m->ident != -1 ; m++) {
+ for (m = macintosh_config; m->ident != -1; m++) {
if (m->ident == model) {
macintosh_config = m;
break;
@@ -801,27 +795,26 @@ void mac_identify(void)
/* the serial ports set to "Faster" mode in MacOS. */
iop_preinit();
- mac_debug_init();
- printk (KERN_INFO "Detected Macintosh model: %d \n", model);
+ printk(KERN_INFO "Detected Macintosh model: %d \n", model);
/*
* Report booter data:
*/
- printk (KERN_DEBUG " Penguin bootinfo data:\n");
- printk (KERN_DEBUG " Video: addr 0x%lx row 0x%lx depth %lx dimensions %ld x %ld\n",
+ printk(KERN_DEBUG " Penguin bootinfo data:\n");
+ printk(KERN_DEBUG " Video: addr 0x%lx row 0x%lx depth %lx dimensions %ld x %ld\n",
mac_bi_data.videoaddr, mac_bi_data.videorow,
mac_bi_data.videodepth, mac_bi_data.dimensions & 0xFFFF,
mac_bi_data.dimensions >> 16);
- printk (KERN_DEBUG " Videological 0x%lx phys. 0x%lx, SCC at 0x%lx \n",
+ printk(KERN_DEBUG " Videological 0x%lx phys. 0x%lx, SCC at 0x%lx \n",
mac_bi_data.videological, mac_orig_videoaddr,
mac_bi_data.sccbase);
- printk (KERN_DEBUG " Boottime: 0x%lx GMTBias: 0x%lx \n",
+ printk(KERN_DEBUG " Boottime: 0x%lx GMTBias: 0x%lx \n",
mac_bi_data.boottime, mac_bi_data.gmtbias);
- printk (KERN_DEBUG " Machine ID: %ld CPUid: 0x%lx memory size: 0x%lx \n",
+ printk(KERN_DEBUG " Machine ID: %ld CPUid: 0x%lx memory size: 0x%lx \n",
mac_bi_data.id, mac_bi_data.cpuid, mac_bi_data.memsize);
#if 0
- printk ("Ramdisk: addr 0x%lx size 0x%lx\n",
+ printk("Ramdisk: addr 0x%lx size 0x%lx\n",
m68k_ramdisk.addr, m68k_ramdisk.size);
#endif
@@ -830,22 +823,22 @@ void mac_identify(void)
*/
switch (macintosh_config->scsi_type) {
case MAC_SCSI_OLD:
- MACHW_SET(MAC_SCSI_80);
- break;
+ MACHW_SET(MAC_SCSI_80);
+ break;
case MAC_SCSI_QUADRA:
case MAC_SCSI_QUADRA2:
case MAC_SCSI_QUADRA3:
- MACHW_SET(MAC_SCSI_96);
- if ((macintosh_config->ident == MAC_MODEL_Q900) ||
- (macintosh_config->ident == MAC_MODEL_Q950))
- MACHW_SET(MAC_SCSI_96_2);
- break;
+ MACHW_SET(MAC_SCSI_96);
+ if ((macintosh_config->ident == MAC_MODEL_Q900) ||
+ (macintosh_config->ident == MAC_MODEL_Q950))
+ MACHW_SET(MAC_SCSI_96_2);
+ break;
default:
- printk(KERN_WARNING "config.c: wtf: unknown scsi, using 53c80\n");
- MACHW_SET(MAC_SCSI_80);
- break;
-
+ printk(KERN_WARNING "config.c: wtf: unknown scsi, using 53c80\n");
+ MACHW_SET(MAC_SCSI_80);
+ break;
}
+
iop_init();
via_init();
oss_init();
@@ -860,6 +853,6 @@ void mac_report_hardware(void)
static void mac_get_model(char *str)
{
- strcpy(str,"Macintosh ");
+ strcpy(str, "Macintosh ");
strcat(str, macintosh_config->name);
}
diff --git a/arch/m68k/mac/debug.c b/arch/m68k/mac/debug.c
index 4eeb09dc0e8..7a5bed5bdc5 100644
--- a/arch/m68k/mac/debug.c
+++ b/arch/m68k/mac/debug.c
@@ -27,10 +27,6 @@
#include <asm/machw.h>
#include <asm/macints.h>
-extern char m68k_debug_device[];
-
-extern struct compat_bootinfo compat_boot_info;
-
extern unsigned long mac_videobase;
extern unsigned long mac_videodepth;
extern unsigned long mac_rowbytes;
@@ -52,7 +48,7 @@ extern void mac_serial_print(const char *);
*/
#ifdef DEBUG_SCREEN
-static int peng=0, line=0;
+static int peng, line;
#endif
void mac_debugging_short(int pos, short num)
@@ -74,15 +70,14 @@ void mac_debugging_short(int pos, short num)
}
/* calculate current offset */
- pengoffset=(unsigned char *)(mac_videobase+(150+line*2)*mac_rowbytes)
- +80*peng;
+ pengoffset = (unsigned char *)mac_videobase +
+ (150+line*2) * mac_rowbytes) + 80 * peng;
- pptr=pengoffset;
+ pptr = pengoffset;
- for(i=0;i<8*sizeof(short);i++) /* # of bits */
- {
+ for (i = 0; i < 8 * sizeof(short); i++) { /* # of bits */
/* value mask for bit i, reverse order */
- *pptr++ = (num & ( 1 << (8*sizeof(short)-i-1) ) ? 0xFF : 0x00);
+ *pptr++ = (num & (1 << (8*sizeof(short)-i-1)) ? 0xFF : 0x00);
}
peng++;
@@ -115,11 +110,10 @@ void mac_debugging_long(int pos, long addr)
pengoffset=(unsigned char *)(mac_videobase+(150+line*2)*mac_rowbytes)
+80*peng;
- pptr=pengoffset;
+ pptr = pengoffset;
- for(i=0;i<8*sizeof(long);i++) /* # of bits */
- {
- *pptr++ = (addr & ( 1 << (8*sizeof(long)-i-1) ) ? 0xFF : 0x00);
+ for (i = 0; i < 8 * sizeof(long); i++) { /* # of bits */
+ *pptr++ = (addr & (1 << (8*sizeof(long)-i-1)) ? 0xFF : 0x00);
}
peng++;
@@ -136,16 +130,15 @@ void mac_debugging_long(int pos, long addr)
* TODO: serial debug code
*/
-struct mac_SCC
- {
- u_char cha_b_ctrl;
- u_char char_dummy1;
- u_char cha_a_ctrl;
- u_char char_dummy2;
- u_char cha_b_data;
- u_char char_dummy3;
- u_char cha_a_data;
- };
+struct mac_SCC {
+ u_char cha_b_ctrl;
+ u_char char_dummy1;
+ u_char cha_a_ctrl;
+ u_char char_dummy2;
+ u_char cha_b_data;
+ u_char char_dummy3;
+ u_char cha_a_data;
+};
# define scc (*((volatile struct mac_SCC*)mac_bi_data.sccbase))
@@ -158,9 +151,9 @@ int mac_SCC_reset_done;
static int scc_port = -1;
static struct console mac_console_driver = {
- .name = "debug",
- .flags = CON_PRINTBUFFER,
- .index = -1,
+ .name = "debug",
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
};
/*
@@ -178,8 +171,8 @@ static struct console mac_console_driver = {
* this driver if Mac.
*/
-void mac_debug_console_write (struct console *co, const char *str,
- unsigned int count)
+void mac_debug_console_write(struct console *co, const char *str,
+ unsigned int count)
{
mac_serial_print(str);
}
@@ -190,48 +183,50 @@ void mac_debug_console_write (struct console *co, const char *str,
#define uSEC 1
-static inline void mac_sccb_out (char c)
+static inline void mac_sccb_out(char c)
{
- int i;
- do {
- for( i = uSEC; i > 0; --i )
+ int i;
+
+ do {
+ for (i = uSEC; i > 0; --i)
+ barrier();
+ } while (!(scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */
+ for (i = uSEC; i > 0; --i)
barrier();
- } while (!(scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */
- for( i = uSEC; i > 0; --i )
- barrier();
- scc.cha_b_data = c;
+ scc.cha_b_data = c;
}
-static inline void mac_scca_out (char c)
+static inline void mac_scca_out(char c)
{
- int i;
- do {
- for( i = uSEC; i > 0; --i )
+ int i;
+
+ do {
+ for (i = uSEC; i > 0; --i)
+ barrier();
+ } while (!(scc.cha_a_ctrl & 0x04)); /* wait for tx buf empty */
+ for (i = uSEC; i > 0; --i)
barrier();
- } while (!(scc.cha_a_ctrl & 0x04)); /* wait for tx buf empty */
- for( i = uSEC; i > 0; --i )
- barrier();
- scc.cha_a_data = c;
+ scc.cha_a_data = c;
}
-void mac_sccb_console_write (struct console *co, const char *str,
- unsigned int count)
+void mac_sccb_console_write(struct console *co, const char *str,
+ unsigned int count)
{
- while (count--) {
- if (*str == '\n')
- mac_sccb_out( '\r' );
- mac_sccb_out( *str++ );
- }
+ while (count--) {
+ if (*str == '\n')
+ mac_sccb_out('\r');
+ mac_sccb_out(*str++);
+ }
}
-void mac_scca_console_write (struct console *co, const char *str,
- unsigned int count)
+void mac_scca_console_write(struct console *co, const char *str,
+ unsigned int count)
{
- while (count--) {
- if (*str == '\n')
- mac_scca_out( '\r' );
- mac_scca_out( *str++ );
- }
+ while (count--) {
+ if (*str == '\n')
+ mac_scca_out('\r');
+ mac_scca_out(*str++);
+ }
}
@@ -239,41 +234,41 @@ void mac_scca_console_write (struct console *co, const char *str,
* SCC serial ports. They're used by the debugging interface, kgdb, and the
* serial console code. */
#define SCCB_WRITE(reg,val) \
- do { \
- int i; \
- scc.cha_b_ctrl = (reg); \
- for( i = uSEC; i > 0; --i ) \
- barrier(); \
- scc.cha_b_ctrl = (val); \
- for( i = uSEC; i > 0; --i ) \
- barrier(); \
- } while(0)
+ do { \
+ int i; \
+ scc.cha_b_ctrl = (reg); \
+ for (i = uSEC; i > 0; --i) \
+ barrier(); \
+ scc.cha_b_ctrl = (val); \
+ for (i = uSEC; i > 0; --i) \
+ barrier(); \
+ } while(0)
#define SCCA_WRITE(reg,val) \
- do { \
- int i; \
- scc.cha_a_ctrl = (reg); \
- for( i = uSEC; i > 0; --i ) \
- barrier(); \
- scc.cha_a_ctrl = (val); \
- for( i = uSEC; i > 0; --i ) \
- barrier(); \
- } while(0)
+ do { \
+ int i; \
+ scc.cha_a_ctrl = (reg); \
+ for (i = uSEC; i > 0; --i) \
+ barrier(); \
+ scc.cha_a_ctrl = (val); \
+ for (i = uSEC; i > 0; --i) \
+ barrier(); \
+ } while(0)
/* loops_per_jiffy isn't initialized yet, so we can't use udelay(). This does a
* delay of ~ 60us. */
/* Mac: loops_per_jiffy min. 19000 ^= .5 us; MFPDELAY was 0.6 us*/
-#define LONG_DELAY() \
- do { \
- int i; \
- for( i = 60*uSEC; i > 0; --i ) \
- barrier(); \
- } while(0)
+#define LONG_DELAY() \
+ do { \
+ int i; \
+ for (i = 60*uSEC; i > 0; --i) \
+ barrier(); \
+ } while(0)
#ifndef CONFIG_SERIAL_CONSOLE
-static void __init mac_init_scc_port( int cflag, int port )
+static void __init mac_init_scc_port(int cflag, int port)
#else
-void mac_init_scc_port( int cflag, int port )
+void mac_init_scc_port(int cflag, int port)
#endif
{
extern int mac_SCC_reset_done;
@@ -292,106 +287,102 @@ void mac_init_scc_port( int cflag, int port )
/* reg12 (BRG low) */
{ 94, 62, 46, 22, 10, 4, 1, 0, 0 };
- int baud = cflag & CBAUD;
- int clksrc, clkmode, div, reg3, reg5;
-
- if (cflag & CBAUDEX)
- baud += B38400;
- if (baud < B1200 || baud > B38400+2)
- baud = B9600; /* use default 9600bps for non-implemented rates */
- baud -= B1200; /* tables starts at 1200bps */
-
- clksrc = clksrc_table[baud];
- clkmode = clkmode_table[baud];
- div = div_table[baud];
-
- reg3 = (((cflag & CSIZE) == CS8) ? 0xc0 : 0x40);
- reg5 = (((cflag & CSIZE) == CS8) ? 0x60 : 0x20) | 0x82 /* assert DTR/RTS */;
-
- if (port == 1) {
- (void)scc.cha_b_ctrl; /* reset reg pointer */
- SCCB_WRITE( 9, 0xc0 ); /* reset */
- LONG_DELAY(); /* extra delay after WR9 access */
- SCCB_WRITE( 4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) : 0 |
+ int baud = cflag & CBAUD;
+ int clksrc, clkmode, div, reg3, reg5;
+
+ if (cflag & CBAUDEX)
+ baud += B38400;
+ if (baud < B1200 || baud > B38400+2)
+ baud = B9600; /* use default 9600bps for non-implemented rates */
+ baud -= B1200; /* tables starts at 1200bps */
+
+ clksrc = clksrc_table[baud];
+ clkmode = clkmode_table[baud];
+ div = div_table[baud];
+
+ reg3 = (((cflag & CSIZE) == CS8) ? 0xc0 : 0x40);
+ reg5 = (((cflag & CSIZE) == CS8) ? 0x60 : 0x20) | 0x82 /* assert DTR/RTS */;
+
+ if (port == 1) {
+ (void)scc.cha_b_ctrl; /* reset reg pointer */
+ SCCB_WRITE(9, 0xc0); /* reset */
+ LONG_DELAY(); /* extra delay after WR9 access */
+ SCCB_WRITE(4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) : 0 |
+ 0x04 /* 1 stopbit */ |
+ clkmode);
+ SCCB_WRITE(3, reg3);
+ SCCB_WRITE(5, reg5);
+ SCCB_WRITE(9, 0); /* no interrupts */
+ LONG_DELAY(); /* extra delay after WR9 access */
+ SCCB_WRITE(10, 0); /* NRZ mode */
+ SCCB_WRITE(11, clksrc); /* main clock source */
+ SCCB_WRITE(12, div); /* BRG value */
+ SCCB_WRITE(13, 0); /* BRG high byte */
+ SCCB_WRITE(14, 1);
+ SCCB_WRITE(3, reg3 | 1);
+ SCCB_WRITE(5, reg5 | 8);
+ } else if (port == 0) {
+ (void)scc.cha_a_ctrl; /* reset reg pointer */
+ SCCA_WRITE(9, 0xc0); /* reset */
+ LONG_DELAY(); /* extra delay after WR9 access */
+ SCCA_WRITE(4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) : 0 |
0x04 /* 1 stopbit */ |
- clkmode );
- SCCB_WRITE( 3, reg3 );
- SCCB_WRITE( 5, reg5 );
- SCCB_WRITE( 9, 0 ); /* no interrupts */
- LONG_DELAY(); /* extra delay after WR9 access */
- SCCB_WRITE( 10, 0 ); /* NRZ mode */
- SCCB_WRITE( 11, clksrc ); /* main clock source */
- SCCB_WRITE( 12, div ); /* BRG value */
- SCCB_WRITE( 13, 0 ); /* BRG high byte */
- SCCB_WRITE( 14, 1 );
- SCCB_WRITE( 3, reg3 | 1 );
- SCCB_WRITE( 5, reg5 | 8 );
- } else if (port == 0) {
- (void)scc.cha_a_ctrl; /* reset reg pointer */
- SCCA_WRITE( 9, 0xc0 ); /* reset */
- LONG_DELAY(); /* extra delay after WR9 access */
- SCCA_WRITE( 4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) : 0 |
- 0x04 /* 1 stopbit */ |
- clkmode );
- SCCA_WRITE( 3, reg3 );
- SCCA_WRITE( 5, reg5 );
- SCCA_WRITE( 9, 0 ); /* no interrupts */
- LONG_DELAY(); /* extra delay after WR9 access */
- SCCA_WRITE( 10, 0 ); /* NRZ mode */
- SCCA_WRITE( 11, clksrc ); /* main clock source */
- SCCA_WRITE( 12, div ); /* BRG value */
- SCCA_WRITE( 13, 0 ); /* BRG high byte */
- SCCA_WRITE( 14, 1 );
- SCCA_WRITE( 3, reg3 | 1 );
- SCCA_WRITE( 5, reg5 | 8 );
- }
-
- mac_SCC_reset_done = 1;
- mac_SCC_init_done = 1;
+ clkmode);
+ SCCA_WRITE(3, reg3);
+ SCCA_WRITE(5, reg5);
+ SCCA_WRITE(9, 0); /* no interrupts */
+ LONG_DELAY(); /* extra delay after WR9 access */
+ SCCA_WRITE(10, 0); /* NRZ mode */
+ SCCA_WRITE(11, clksrc); /* main clock source */
+ SCCA_WRITE(12, div); /* BRG value */
+ SCCA_WRITE(13, 0); /* BRG high byte */
+ SCCA_WRITE(14, 1);
+ SCCA_WRITE(3, reg3 | 1);
+ SCCA_WRITE(5, reg5 | 8);
+ }
+
+ mac_SCC_reset_done = 1;
+ mac_SCC_init_done = 1;
}
#endif /* DEBUG_SERIAL */
-void mac_init_scca_port( int cflag )
+void mac_init_scca_port(int cflag)
{
mac_init_scc_port(cflag, 0);
}
-void mac_init_sccb_port( int cflag )
+void mac_init_sccb_port(int cflag)
{
mac_init_scc_port(cflag, 1);
}
-void __init mac_debug_init(void)
+static int __init mac_debug_setup(char *arg)
{
+ if (!MACH_IS_MAC)
+ return 0;
+
#ifdef DEBUG_SERIAL
- if ( !strcmp( m68k_debug_device, "ser" )
- || !strcmp( m68k_debug_device, "ser1" )) {
- /* Mac modem port */
- mac_init_scc_port( B9600|CS8, 0 );
- mac_console_driver.write = mac_scca_console_write;
- scc_port = 0;
- }
- else if (!strcmp( m68k_debug_device, "ser2" )) {
- /* Mac printer port */
- mac_init_scc_port( B9600|CS8, 1 );
- mac_console_driver.write = mac_sccb_console_write;
- scc_port = 1;
- }
+ if (!strcmp(arg, "ser") || !strcmp(arg, "ser1")) {
+ /* Mac modem port */
+ mac_init_scc_port(B9600|CS8, 0);
+ mac_console_driver.write = mac_scca_console_write;
+ scc_port = 0;
+ } else if (!strcmp(arg, "ser2")) {
+ /* Mac printer port */
+ mac_init_scc_port(B9600|CS8, 1);
+ mac_console_driver.write = mac_sccb_console_write;
+ scc_port = 1;
+ }
#endif
#ifdef DEBUG_HEADS
- if ( !strcmp( m68k_debug_device, "scn" )
- || !strcmp( m68k_debug_device, "con" )) {
- /* display, using head.S console routines */
- mac_console_driver.write = mac_debug_console_write;
- }
+ if (!strcmp(arg, "scn") || !strcmp(arg, "con")) {
+ /* display, using head.S console routines */
+ mac_console_driver.write = mac_debug_console_write;
+ }
#endif
- if (mac_console_driver.write)
- register_console(&mac_console_driver);
+ if (mac_console_driver.write)
+ register_console(&mac_console_driver);
+ return 0;
}
-/*
- * Local variables:
- * c-indent-level: 4
- * tab-width: 8
- * End:
- */
+early_param("debug", mac_debug_setup);
diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c
index 63690819565..d7be16917ef 100644
--- a/arch/m68k/mac/oss.c
+++ b/arch/m68k/mac/oss.c
@@ -109,13 +109,11 @@ irqreturn_t oss_irq(int irq, void *dev_id)
/* FIXME: how do you clear a pending IRQ? */
if (events & OSS_IP_SOUND) {
- /* FIXME: call sound handler */
oss->irq_pending &= ~OSS_IP_SOUND;
+ /* FIXME: call sound handler */
} else if (events & OSS_IP_SCSI) {
- oss->irq_level[OSS_SCSI] = OSS_IRQLEV_DISABLED;
- m68k_handle_int(IRQ_MAC_SCSI);
oss->irq_pending &= ~OSS_IP_SCSI;
- oss->irq_level[OSS_SCSI] = OSS_IRQLEV_SCSI;
+ m68k_handle_int(IRQ_MAC_SCSI);
} else {
/* FIXME: error check here? */
}
@@ -143,14 +141,16 @@ irqreturn_t oss_nubus_irq(int irq, void *dev_id)
#endif
/* There are only six slots on the OSS, not seven */
- for (i = 0, irq_bit = 1 ; i < 6 ; i++, irq_bit <<= 1) {
+ i = 6;
+ irq_bit = 0x40;
+ do {
+ --i;
+ irq_bit >>= 1;
if (events & irq_bit) {
- oss->irq_level[i] = OSS_IRQLEV_DISABLED;
- m68k_handle_int(NUBUS_SOURCE_BASE + i);
oss->irq_pending &= ~irq_bit;
- oss->irq_level[i] = OSS_IRQLEV_NUBUS;
+ m68k_handle_int(NUBUS_SOURCE_BASE + i);
}
- }
+ } while(events & (irq_bit - 1));
return IRQ_HANDLED;
}
diff --git a/arch/m68k/mac/psc.c b/arch/m68k/mac/psc.c
index 15378a5878c..d66f723b17c 100644
--- a/arch/m68k/mac/psc.c
+++ b/arch/m68k/mac/psc.c
@@ -131,11 +131,8 @@ irqreturn_t psc_irq(int irq, void *dev_id)
{
int pIFR = pIFRbase + ((int) dev_id);
int pIER = pIERbase + ((int) dev_id);
- int base_irq;
- int irq_bit,i;
- unsigned char events;
-
- base_irq = irq << 3;
+ int irq_num;
+ unsigned char irq_bit, events;
#ifdef DEBUG_IRQS
printk("psc_irq: irq %d pIFR = 0x%02X pIER = 0x%02X\n",
@@ -146,14 +143,16 @@ irqreturn_t psc_irq(int irq, void *dev_id)
if (!events)
return IRQ_NONE;
- for (i = 0, irq_bit = 1 ; i < 4 ; i++, irq_bit <<= 1) {
- if (events & irq_bit) {
- psc_write_byte(pIER, irq_bit);
- m68k_handle_int(base_irq + i);
+ irq_num = irq << 3;
+ irq_bit = 1;
+ do {
+ if (events & irq_bit) {
psc_write_byte(pIFR, irq_bit);
- psc_write_byte(pIER, irq_bit | 0x80);
+ m68k_handle_int(irq_num);
}
- }
+ irq_num++;
+ irq_bit <<= 1;
+ } while (events >= irq_bit);
return IRQ_HANDLED;
}
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index e27735be292..d5cac72eb3d 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -13,6 +13,10 @@
* for info. A full-text web search on 6522 AND VIA will probably also
* net some usefulness. <cananian@alumni.princeton.edu> 20apr1999
*
+ * Additional data is here (the SY6522 was used in the Mac II etc):
+ * http://www.6502.org/documents/datasheets/synertek/synertek_sy6522.pdf
+ * http://www.6502.org/documents/datasheets/synertek/synertek_sy6522_programming_reference.pdf
+ *
* PRAM/RTC access algorithms are from the NetBSD RTC toolkit version 1.08b
* by Erik Vogan and adapted to Linux by Joshua M. Thompson (funaho@jurai.org)
*
@@ -37,7 +41,7 @@ volatile __u8 *via1, *via2;
/* See note in mac_via.h about how this is possibly not useful */
volatile long *via_memory_bogon=(long *)&via_memory_bogon;
#endif
-int rbv_present,via_alt_mapping;
+int rbv_present, via_alt_mapping;
__u8 rbv_clear;
/*
@@ -60,7 +64,19 @@ static int gIER,gIFR,gBufA,gBufB;
#define MAC_CLOCK_LOW (MAC_CLOCK_TICK&0xFF)
#define MAC_CLOCK_HIGH (MAC_CLOCK_TICK>>8)
-static int nubus_active;
+/* To disable a NuBus slot on Quadras we make the slot IRQ lines outputs, set
+ * high. On RBV we just use the slot interrupt enable register. On Macs with
+ * genuine VIA chips we must use nubus_disabled to keep track of disabled slot
+ * interrupts. When any slot IRQ is disabled we mask the (edge triggered) CA1
+ * or "SLOTS" interrupt. When no slot is disabled, we unmask the CA1 interrupt.
+ * So, on genuine VIAs, having more than one NuBus IRQ can mean trouble,
+ * because closing one of those drivers can mask all of the NuBus interrupts.
+ * Also, since we can't mask the unregistered slot IRQs on genuine VIAs, it's
+ * possible to get interrupts from cards that MacOS or the ROM has configured
+ * but we have not. FWIW, "Designing Cards and Drivers for Macintosh II and
+ * Macintosh SE", page 9-8, says, a slot IRQ with no driver would crash MacOS.
+ */
+static u8 nubus_disabled;
void via_debug_dump(void);
irqreturn_t via1_irq(int, void *);
@@ -138,11 +154,11 @@ void __init via_init(void)
printk(KERN_INFO "VIA2 at %p is ", via2);
if (rbv_present) {
- printk(KERN_INFO "an RBV\n");
+ printk("an RBV\n");
} else if (oss_present) {
- printk(KERN_INFO "an OSS\n");
+ printk("an OSS\n");
} else {
- printk(KERN_INFO "a 6522 or clone\n");
+ printk("a 6522 or clone\n");
}
#ifdef DEBUG_VIA
@@ -163,6 +179,7 @@ void __init via_init(void)
via1[vT2CL] = 0;
via1[vT2CH] = 0;
via1[vACR] &= 0x3F;
+ via1[vACR] &= ~0x03; /* disable port A & B latches */
/*
* SE/30: disable video IRQ
@@ -193,8 +210,14 @@ void __init via_init(void)
/* that the IIfx emulates this alternate mapping using the OSS. */
switch(macintosh_config->ident) {
+ case MAC_MODEL_P475:
+ case MAC_MODEL_P475F:
+ case MAC_MODEL_P575:
+ case MAC_MODEL_Q605:
+ case MAC_MODEL_Q605_ACC:
case MAC_MODEL_C610:
case MAC_MODEL_Q610:
+ case MAC_MODEL_Q630:
case MAC_MODEL_C650:
case MAC_MODEL_Q650:
case MAC_MODEL_Q700:
@@ -228,6 +251,22 @@ void __init via_init(void)
via2[vT2CL] = 0;
via2[vT2CH] = 0;
via2[vACR] &= 0x3F;
+ via2[vACR] &= ~0x03; /* disable port A & B latches */
+ }
+
+ /*
+ * Set vPCR for SCSI interrupts (but not on RBV)
+ */
+ if (!rbv_present) {
+ if (macintosh_config->scsi_type == MAC_SCSI_OLD) {
+ /* CB2 (IRQ) indep. input, positive edge */
+ /* CA2 (DRQ) indep. input, positive edge */
+ via2[vPCR] = 0x66;
+ } else {
+ /* CB2 (IRQ) indep. input, negative edge */
+ /* CA2 (DRQ) indep. input, negative edge */
+ via2[vPCR] = 0x22;
+ }
}
}
@@ -356,78 +395,75 @@ int via_get_cache_disable(void)
void __init via_nubus_init(void)
{
- /* don't set nubus_active = 0 here, it kills the Baboon */
- /* interrupt that we've already registered. */
-
/* unlock nubus transactions */
- if (!rbv_present) {
+ if ((macintosh_config->adb_type != MAC_ADB_PB1) &&
+ (macintosh_config->adb_type != MAC_ADB_PB2)) {
/* set the line to be an output on non-RBV machines */
- if ((macintosh_config->adb_type != MAC_ADB_PB1) &&
- (macintosh_config->adb_type != MAC_ADB_PB2)) {
+ if (!rbv_present)
via2[vDirB] |= 0x02;
- }
- }
- /* this seems to be an ADB bit on PMU machines */
- /* according to MkLinux. -- jmt */
-
- if ((macintosh_config->adb_type != MAC_ADB_PB1) &&
- (macintosh_config->adb_type != MAC_ADB_PB2)) {
+ /* this seems to be an ADB bit on PMU machines */
+ /* according to MkLinux. -- jmt */
via2[gBufB] |= 0x02;
}
- /* disable nubus slot interrupts. */
- if (rbv_present) {
+ /* Disable all the slot interrupts (where possible). */
+
+ switch (macintosh_config->via_type) {
+ case MAC_VIA_II:
+ /* Just make the port A lines inputs. */
+ switch(macintosh_config->ident) {
+ case MAC_MODEL_II:
+ case MAC_MODEL_IIX:
+ case MAC_MODEL_IICX:
+ case MAC_MODEL_SE30:
+ /* The top two bits are RAM size outputs. */
+ via2[vDirA] &= 0xC0;
+ break;
+ default:
+ via2[vDirA] &= 0x80;
+ }
+ break;
+ case MAC_VIA_IIci:
+ /* RBV. Disable all the slot interrupts. SIER works like IER. */
via2[rSIER] = 0x7F;
- via2[rSIER] = nubus_active | 0x80;
- } else {
- /* These are ADB bits on PMU */
+ break;
+ case MAC_VIA_QUADRA:
+ /* Disable the inactive slot interrupts by making those lines outputs. */
if ((macintosh_config->adb_type != MAC_ADB_PB1) &&
- (macintosh_config->adb_type != MAC_ADB_PB2)) {
- switch(macintosh_config->ident)
- {
- case MAC_MODEL_II:
- case MAC_MODEL_IIX:
- case MAC_MODEL_IICX:
- case MAC_MODEL_SE30:
- via2[vBufA] |= 0x3F;
- via2[vDirA] = ~nubus_active | 0xc0;
- break;
- default:
- via2[vBufA] = 0xFF;
- via2[vDirA] = ~nubus_active;
- }
+ (macintosh_config->adb_type != MAC_ADB_PB2)) {
+ via2[vBufA] |= 0x7F;
+ via2[vDirA] |= 0x7F;
}
+ break;
}
}
/*
* The generic VIA interrupt routines (shamelessly stolen from Alan Cox's
* via6522.c :-), disable/pending masks added.
- *
- * The new interrupt architecture in macints.c takes care of a lot of the
- * gruntwork for us, including tallying the interrupts and calling the
- * handlers on the linked list. All we need to do here is basically generate
- * the machspec interrupt number after clearing the interrupt.
*/
irqreturn_t via1_irq(int irq, void *dev_id)
{
- int irq_bit, i;
- unsigned char events, mask;
+ int irq_num;
+ unsigned char irq_bit, events;
- mask = via1[vIER] & 0x7F;
- if (!(events = via1[vIFR] & mask))
+ events = via1[vIFR] & via1[vIER] & 0x7F;
+ if (!events)
return IRQ_NONE;
- for (i = 0, irq_bit = 1 ; i < 7 ; i++, irq_bit <<= 1)
+ irq_num = VIA1_SOURCE_BASE;
+ irq_bit = 1;
+ do {
if (events & irq_bit) {
- via1[vIER] = irq_bit;
- m68k_handle_int(VIA1_SOURCE_BASE + i);
via1[vIFR] = irq_bit;
- via1[vIER] = irq_bit | 0x80;
+ m68k_handle_int(irq_num);
}
+ ++irq_num;
+ irq_bit <<= 1;
+ } while (events >= irq_bit);
#if 0 /* freakin' pmu is doing weird stuff */
if (!oss_present) {
@@ -448,20 +484,23 @@ irqreturn_t via1_irq(int irq, void *dev_id)
irqreturn_t via2_irq(int irq, void *dev_id)
{
- int irq_bit, i;
- unsigned char events, mask;
+ int irq_num;
+ unsigned char irq_bit, events;
- mask = via2[gIER] & 0x7F;
- if (!(events = via2[gIFR] & mask))
+ events = via2[gIFR] & via2[gIER] & 0x7F;
+ if (!events)
return IRQ_NONE;
- for (i = 0, irq_bit = 1 ; i < 7 ; i++, irq_bit <<= 1)
+ irq_num = VIA2_SOURCE_BASE;
+ irq_bit = 1;
+ do {
if (events & irq_bit) {
- via2[gIER] = irq_bit;
via2[gIFR] = irq_bit | rbv_clear;
- m68k_handle_int(VIA2_SOURCE_BASE + i);
- via2[gIER] = irq_bit | 0x80;
+ m68k_handle_int(irq_num);
}
+ ++irq_num;
+ irq_bit <<= 1;
+ } while (events >= irq_bit);
return IRQ_HANDLED;
}
@@ -472,71 +511,75 @@ irqreturn_t via2_irq(int irq, void *dev_id)
irqreturn_t via_nubus_irq(int irq, void *dev_id)
{
- int irq_bit, i;
- unsigned char events;
-
- if (!(events = ~via2[gBufA] & nubus_active))
+ int slot_irq;
+ unsigned char slot_bit, events;
+
+ events = ~via2[gBufA] & 0x7F;
+ if (rbv_present)
+ events &= via2[rSIER];
+ else
+ events &= ~via2[vDirA];
+ if (!events)
return IRQ_NONE;
- for (i = 0, irq_bit = 1 ; i < 7 ; i++, irq_bit <<= 1) {
- if (events & irq_bit) {
- via_irq_disable(NUBUS_SOURCE_BASE + i);
- m68k_handle_int(NUBUS_SOURCE_BASE + i);
- via_irq_enable(NUBUS_SOURCE_BASE + i);
- }
- }
+ do {
+ slot_irq = IRQ_NUBUS_F;
+ slot_bit = 0x40;
+ do {
+ if (events & slot_bit) {
+ events &= ~slot_bit;
+ m68k_handle_int(slot_irq);
+ }
+ --slot_irq;
+ slot_bit >>= 1;
+ } while (events);
+
+ /* clear the CA1 interrupt and make certain there's no more. */
+ via2[gIFR] = 0x02 | rbv_clear;
+ events = ~via2[gBufA] & 0x7F;
+ if (rbv_present)
+ events &= via2[rSIER];
+ else
+ events &= ~via2[vDirA];
+ } while (events);
return IRQ_HANDLED;
}
void via_irq_enable(int irq) {
int irq_src = IRQ_SRC(irq);
int irq_idx = IRQ_IDX(irq);
- int irq_bit = 1 << irq_idx;
#ifdef DEBUG_IRQUSE
printk(KERN_DEBUG "via_irq_enable(%d)\n", irq);
#endif
if (irq_src == 1) {
- via1[vIER] = irq_bit | 0x80;
+ via1[vIER] = IER_SET_BIT(irq_idx);
} else if (irq_src == 2) {
- /*
- * Set vPCR for SCSI interrupts (but not on RBV)
- */
- if ((irq_idx == 0) && !rbv_present) {
- if (macintosh_config->scsi_type == MAC_SCSI_OLD) {
- /* CB2 (IRQ) indep. input, positive edge */
- /* CA2 (DRQ) indep. input, positive edge */
- via2[vPCR] = 0x66;
- } else {
- /* CB2 (IRQ) indep. input, negative edge */
- /* CA2 (DRQ) indep. input, negative edge */
- via2[vPCR] = 0x22;
- }
- }
- via2[gIER] = irq_bit | 0x80;
+ if (irq != IRQ_MAC_NUBUS || nubus_disabled == 0)
+ via2[gIER] = IER_SET_BIT(irq_idx);
} else if (irq_src == 7) {
- nubus_active |= irq_bit;
- if (rbv_present) {
- /* enable the slot interrupt. SIER works like IER. */
+ switch (macintosh_config->via_type) {
+ case MAC_VIA_II:
+ nubus_disabled &= ~(1 << irq_idx);
+ /* Enable the CA1 interrupt when no slot is disabled. */
+ if (!nubus_disabled)
+ via2[gIER] = IER_SET_BIT(1);
+ break;
+ case MAC_VIA_IIci:
+ /* On RBV, enable the slot interrupt.
+ * SIER works like IER.
+ */
via2[rSIER] = IER_SET_BIT(irq_idx);
- } else {
- /* Make sure the bit is an input, to enable the irq */
- /* But not on PowerBooks, that's ADB... */
+ break;
+ case MAC_VIA_QUADRA:
+ /* Make the port A line an input to enable the slot irq.
+ * But not on PowerBooks, that's ADB.
+ */
if ((macintosh_config->adb_type != MAC_ADB_PB1) &&
- (macintosh_config->adb_type != MAC_ADB_PB2)) {
- switch(macintosh_config->ident)
- {
- case MAC_MODEL_II:
- case MAC_MODEL_IIX:
- case MAC_MODEL_IICX:
- case MAC_MODEL_SE30:
- via2[vDirA] &= (~irq_bit | 0xc0);
- break;
- default:
- via2[vDirA] &= ~irq_bit;
- }
- }
+ (macintosh_config->adb_type != MAC_ADB_PB2))
+ via2[vDirA] &= ~(1 << irq_idx);
+ break;
}
}
}
@@ -544,29 +587,31 @@ void via_irq_enable(int irq) {
void via_irq_disable(int irq) {
int irq_src = IRQ_SRC(irq);
int irq_idx = IRQ_IDX(irq);
- int irq_bit = 1 << irq_idx;
#ifdef DEBUG_IRQUSE
printk(KERN_DEBUG "via_irq_disable(%d)\n", irq);
#endif
if (irq_src == 1) {
- via1[vIER] = irq_bit;
+ via1[vIER] = IER_CLR_BIT(irq_idx);
} else if (irq_src == 2) {
- via2[gIER] = irq_bit;
+ via2[gIER] = IER_CLR_BIT(irq_idx);
} else if (irq_src == 7) {
- if (rbv_present) {
- /* disable the slot interrupt. SIER works like IER. */
+ switch (macintosh_config->via_type) {
+ case MAC_VIA_II:
+ nubus_disabled |= 1 << irq_idx;
+ if (nubus_disabled)
+ via2[gIER] = IER_CLR_BIT(1);
+ break;
+ case MAC_VIA_IIci:
via2[rSIER] = IER_CLR_BIT(irq_idx);
- } else {
- /* disable the nubus irq by changing dir to output */
- /* except on PMU */
+ break;
+ case MAC_VIA_QUADRA:
if ((macintosh_config->adb_type != MAC_ADB_PB1) &&
- (macintosh_config->adb_type != MAC_ADB_PB2)) {
- via2[vDirA] |= irq_bit;
- }
+ (macintosh_config->adb_type != MAC_ADB_PB2))
+ via2[vDirA] |= 1 << irq_idx;
+ break;
}
- nubus_active &= ~irq_bit;
}
}
@@ -580,7 +625,9 @@ void via_irq_clear(int irq) {
} else if (irq_src == 2) {
via2[gIFR] = irq_bit | rbv_clear;
} else if (irq_src == 7) {
- /* FIXME: hmm.. */
+ /* FIXME: There is no way to clear an individual nubus slot
+ * IRQ flag, other than getting the device to do it.
+ */
}
}
@@ -600,6 +647,7 @@ int via_irq_pending(int irq)
} else if (irq_src == 2) {
return via2[gIFR] & irq_bit;
} else if (irq_src == 7) {
+ /* Always 0 for MAC_VIA_QUADRA if the slot irq is disabled. */
return ~via2[gBufA] & irq_bit;
}
return 0;
generated by cgit (git 2.34.1) at 2024-11-20 07:30:11 +0000