diff options
Diffstat (limited to 'arch/m68k/mac/debug.c')
| -rw-r--r-- | arch/m68k/mac/debug.c | 331 |
1 files changed, 161 insertions, 170 deletions
diff --git a/arch/m68k/mac/debug.c b/arch/m68k/mac/debug.c index 4eeb09dc0e8..7a5bed5bdc5 100644 --- a/arch/m68k/mac/debug.c +++ b/arch/m68k/mac/debug.c @@ -27,10 +27,6 @@ #include <asm/machw.h> #include <asm/macints.h> -extern char m68k_debug_device[]; - -extern struct compat_bootinfo compat_boot_info; - extern unsigned long mac_videobase; extern unsigned long mac_videodepth; extern unsigned long mac_rowbytes; @@ -52,7 +48,7 @@ extern void mac_serial_print(const char *); */ #ifdef DEBUG_SCREEN -static int peng=0, line=0; +static int peng, line; #endif void mac_debugging_short(int pos, short num) @@ -74,15 +70,14 @@ void mac_debugging_short(int pos, short num) } /* calculate current offset */ - pengoffset=(unsigned char *)(mac_videobase+(150+line*2)*mac_rowbytes) - +80*peng; + pengoffset = (unsigned char *)mac_videobase + + (150+line*2) * mac_rowbytes) + 80 * peng; - pptr=pengoffset; + pptr = pengoffset; - for(i=0;i<8*sizeof(short);i++) /* # of bits */ - { + for (i = 0; i < 8 * sizeof(short); i++) { /* # of bits */ /* value mask for bit i, reverse order */ - *pptr++ = (num & ( 1 << (8*sizeof(short)-i-1) ) ? 0xFF : 0x00); + *pptr++ = (num & (1 << (8*sizeof(short)-i-1)) ? 0xFF : 0x00); } peng++; @@ -115,11 +110,10 @@ void mac_debugging_long(int pos, long addr) pengoffset=(unsigned char *)(mac_videobase+(150+line*2)*mac_rowbytes) +80*peng; - pptr=pengoffset; + pptr = pengoffset; - for(i=0;i<8*sizeof(long);i++) /* # of bits */ - { - *pptr++ = (addr & ( 1 << (8*sizeof(long)-i-1) ) ? 0xFF : 0x00); + for (i = 0; i < 8 * sizeof(long); i++) { /* # of bits */ + *pptr++ = (addr & (1 << (8*sizeof(long)-i-1)) ? 0xFF : 0x00); } peng++; @@ -136,16 +130,15 @@ void mac_debugging_long(int pos, long addr) * TODO: serial debug code */ -struct mac_SCC - { - u_char cha_b_ctrl; - u_char char_dummy1; - u_char cha_a_ctrl; - u_char char_dummy2; - u_char cha_b_data; - u_char char_dummy3; - u_char cha_a_data; - }; +struct mac_SCC { + u_char cha_b_ctrl; + u_char char_dummy1; + u_char cha_a_ctrl; + u_char char_dummy2; + u_char cha_b_data; + u_char char_dummy3; + u_char cha_a_data; +}; # define scc (*((volatile struct mac_SCC*)mac_bi_data.sccbase)) @@ -158,9 +151,9 @@ int mac_SCC_reset_done; static int scc_port = -1; static struct console mac_console_driver = { - .name = "debug", - .flags = CON_PRINTBUFFER, - .index = -1, + .name = "debug", + .flags = CON_PRINTBUFFER, + .index = -1, }; /* @@ -178,8 +171,8 @@ static struct console mac_console_driver = { * this driver if Mac. */ -void mac_debug_console_write (struct console *co, const char *str, - unsigned int count) +void mac_debug_console_write(struct console *co, const char *str, + unsigned int count) { mac_serial_print(str); } @@ -190,48 +183,50 @@ void mac_debug_console_write (struct console *co, const char *str, #define uSEC 1 -static inline void mac_sccb_out (char c) +static inline void mac_sccb_out(char c) { - int i; - do { - for( i = uSEC; i > 0; --i ) + int i; + + do { + for (i = uSEC; i > 0; --i) + barrier(); + } while (!(scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */ + for (i = uSEC; i > 0; --i) barrier(); - } while (!(scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */ - for( i = uSEC; i > 0; --i ) - barrier(); - scc.cha_b_data = c; + scc.cha_b_data = c; } -static inline void mac_scca_out (char c) +static inline void mac_scca_out(char c) { - int i; - do { - for( i = uSEC; i > 0; --i ) + int i; + + do { + for (i = uSEC; i > 0; --i) + barrier(); + } while (!(scc.cha_a_ctrl & 0x04)); /* wait for tx buf empty */ + for (i = uSEC; i > 0; --i) barrier(); - } while (!(scc.cha_a_ctrl & 0x04)); /* wait for tx buf empty */ - for( i = uSEC; i > 0; --i ) - barrier(); - scc.cha_a_data = c; + scc.cha_a_data = c; } -void mac_sccb_console_write (struct console *co, const char *str, - unsigned int count) +void mac_sccb_console_write(struct console *co, const char *str, + unsigned int count) { - while (count--) { - if (*str == '\n') - mac_sccb_out( '\r' ); - mac_sccb_out( *str++ ); - } + while (count--) { + if (*str == '\n') + mac_sccb_out('\r'); + mac_sccb_out(*str++); + } } -void mac_scca_console_write (struct console *co, const char *str, - unsigned int count) +void mac_scca_console_write(struct console *co, const char *str, + unsigned int count) { - while (count--) { - if (*str == '\n') - mac_scca_out( '\r' ); - mac_scca_out( *str++ ); - } + while (count--) { + if (*str == '\n') + mac_scca_out('\r'); + mac_scca_out(*str++); + } } @@ -239,41 +234,41 @@ void mac_scca_console_write (struct console *co, const char *str, * SCC serial ports. They're used by the debugging interface, kgdb, and the * serial console code. */ #define SCCB_WRITE(reg,val) \ - do { \ - int i; \ - scc.cha_b_ctrl = (reg); \ - for( i = uSEC; i > 0; --i ) \ - barrier(); \ - scc.cha_b_ctrl = (val); \ - for( i = uSEC; i > 0; --i ) \ - barrier(); \ - } while(0) + do { \ + int i; \ + scc.cha_b_ctrl = (reg); \ + for (i = uSEC; i > 0; --i) \ + barrier(); \ + scc.cha_b_ctrl = (val); \ + for (i = uSEC; i > 0; --i) \ + barrier(); \ + } while(0) #define SCCA_WRITE(reg,val) \ - do { \ - int i; \ - scc.cha_a_ctrl = (reg); \ - for( i = uSEC; i > 0; --i ) \ - barrier(); \ - scc.cha_a_ctrl = (val); \ - for( i = uSEC; i > 0; --i ) \ - barrier(); \ - } while(0) + do { \ + int i; \ + scc.cha_a_ctrl = (reg); \ + for (i = uSEC; i > 0; --i) \ + barrier(); \ + scc.cha_a_ctrl = (val); \ + for (i = uSEC; i > 0; --i) \ + barrier(); \ + } while(0) /* loops_per_jiffy isn't initialized yet, so we can't use udelay(). This does a * delay of ~ 60us. */ /* Mac: loops_per_jiffy min. 19000 ^= .5 us; MFPDELAY was 0.6 us*/ -#define LONG_DELAY() \ - do { \ - int i; \ - for( i = 60*uSEC; i > 0; --i ) \ - barrier(); \ - } while(0) +#define LONG_DELAY() \ + do { \ + int i; \ + for (i = 60*uSEC; i > 0; --i) \ + barrier(); \ + } while(0) #ifndef CONFIG_SERIAL_CONSOLE -static void __init mac_init_scc_port( int cflag, int port ) +static void __init mac_init_scc_port(int cflag, int port) #else -void mac_init_scc_port( int cflag, int port ) +void mac_init_scc_port(int cflag, int port) #endif { extern int mac_SCC_reset_done; @@ -292,106 +287,102 @@ void mac_init_scc_port( int cflag, int port ) /* reg12 (BRG low) */ { 94, 62, 46, 22, 10, 4, 1, 0, 0 }; - int baud = cflag & CBAUD; - int clksrc, clkmode, div, reg3, reg5; - - if (cflag & CBAUDEX) - baud += B38400; - if (baud < B1200 || baud > B38400+2) - baud = B9600; /* use default 9600bps for non-implemented rates */ - baud -= B1200; /* tables starts at 1200bps */ - - clksrc = clksrc_table[baud]; - clkmode = clkmode_table[baud]; - div = div_table[baud]; - - reg3 = (((cflag & CSIZE) == CS8) ? 0xc0 : 0x40); - reg5 = (((cflag & CSIZE) == CS8) ? 0x60 : 0x20) | 0x82 /* assert DTR/RTS */; - - if (port == 1) { - (void)scc.cha_b_ctrl; /* reset reg pointer */ - SCCB_WRITE( 9, 0xc0 ); /* reset */ - LONG_DELAY(); /* extra delay after WR9 access */ - SCCB_WRITE( 4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) : 0 | + int baud = cflag & CBAUD; + int clksrc, clkmode, div, reg3, reg5; + + if (cflag & CBAUDEX) + baud += B38400; + if (baud < B1200 || baud > B38400+2) + baud = B9600; /* use default 9600bps for non-implemented rates */ + baud -= B1200; /* tables starts at 1200bps */ + + clksrc = clksrc_table[baud]; + clkmode = clkmode_table[baud]; + div = div_table[baud]; + + reg3 = (((cflag & CSIZE) == CS8) ? 0xc0 : 0x40); + reg5 = (((cflag & CSIZE) == CS8) ? 0x60 : 0x20) | 0x82 /* assert DTR/RTS */; + + if (port == 1) { + (void)scc.cha_b_ctrl; /* reset reg pointer */ + SCCB_WRITE(9, 0xc0); /* reset */ + LONG_DELAY(); /* extra delay after WR9 access */ + SCCB_WRITE(4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) : 0 | + 0x04 /* 1 stopbit */ | + clkmode); + SCCB_WRITE(3, reg3); + SCCB_WRITE(5, reg5); + SCCB_WRITE(9, 0); /* no interrupts */ + LONG_DELAY(); /* extra delay after WR9 access */ + SCCB_WRITE(10, 0); /* NRZ mode */ + SCCB_WRITE(11, clksrc); /* main clock source */ + SCCB_WRITE(12, div); /* BRG value */ + SCCB_WRITE(13, 0); /* BRG high byte */ + SCCB_WRITE(14, 1); + SCCB_WRITE(3, reg3 | 1); + SCCB_WRITE(5, reg5 | 8); + } else if (port == 0) { + (void)scc.cha_a_ctrl; /* reset reg pointer */ + SCCA_WRITE(9, 0xc0); /* reset */ + LONG_DELAY(); /* extra delay after WR9 access */ + SCCA_WRITE(4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) : 0 | 0x04 /* 1 stopbit */ | - clkmode ); - SCCB_WRITE( 3, reg3 ); - SCCB_WRITE( 5, reg5 ); - SCCB_WRITE( 9, 0 ); /* no interrupts */ - LONG_DELAY(); /* extra delay after WR9 access */ - SCCB_WRITE( 10, 0 ); /* NRZ mode */ - SCCB_WRITE( 11, clksrc ); /* main clock source */ - SCCB_WRITE( 12, div ); /* BRG value */ - SCCB_WRITE( 13, 0 ); /* BRG high byte */ - SCCB_WRITE( 14, 1 ); - SCCB_WRITE( 3, reg3 | 1 ); - SCCB_WRITE( 5, reg5 | 8 ); - } else if (port == 0) { - (void)scc.cha_a_ctrl; /* reset reg pointer */ - SCCA_WRITE( 9, 0xc0 ); /* reset */ - LONG_DELAY(); /* extra delay after WR9 access */ - SCCA_WRITE( 4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) : 0 | - 0x04 /* 1 stopbit */ | - clkmode ); - SCCA_WRITE( 3, reg3 ); - SCCA_WRITE( 5, reg5 ); - SCCA_WRITE( 9, 0 ); /* no interrupts */ - LONG_DELAY(); /* extra delay after WR9 access */ - SCCA_WRITE( 10, 0 ); /* NRZ mode */ - SCCA_WRITE( 11, clksrc ); /* main clock source */ - SCCA_WRITE( 12, div ); /* BRG value */ - SCCA_WRITE( 13, 0 ); /* BRG high byte */ - SCCA_WRITE( 14, 1 ); - SCCA_WRITE( 3, reg3 | 1 ); - SCCA_WRITE( 5, reg5 | 8 ); - } - - mac_SCC_reset_done = 1; - mac_SCC_init_done = 1; + clkmode); + SCCA_WRITE(3, reg3); + SCCA_WRITE(5, reg5); + SCCA_WRITE(9, 0); /* no interrupts */ + LONG_DELAY(); /* extra delay after WR9 access */ + SCCA_WRITE(10, 0); /* NRZ mode */ + SCCA_WRITE(11, clksrc); /* main clock source */ + SCCA_WRITE(12, div); /* BRG value */ + SCCA_WRITE(13, 0); /* BRG high byte */ + SCCA_WRITE(14, 1); + SCCA_WRITE(3, reg3 | 1); + SCCA_WRITE(5, reg5 | 8); + } + + mac_SCC_reset_done = 1; + mac_SCC_init_done = 1; } #endif /* DEBUG_SERIAL */ -void mac_init_scca_port( int cflag ) +void mac_init_scca_port(int cflag) { mac_init_scc_port(cflag, 0); } -void mac_init_sccb_port( int cflag ) +void mac_init_sccb_port(int cflag) { mac_init_scc_port(cflag, 1); } -void __init mac_debug_init(void) +static int __init mac_debug_setup(char *arg) { + if (!MACH_IS_MAC) + return 0; + #ifdef DEBUG_SERIAL - if ( !strcmp( m68k_debug_device, "ser" ) - || !strcmp( m68k_debug_device, "ser1" )) { - /* Mac modem port */ - mac_init_scc_port( B9600|CS8, 0 ); - mac_console_driver.write = mac_scca_console_write; - scc_port = 0; - } - else if (!strcmp( m68k_debug_device, "ser2" )) { - /* Mac printer port */ - mac_init_scc_port( B9600|CS8, 1 ); - mac_console_driver.write = mac_sccb_console_write; - scc_port = 1; - } + if (!strcmp(arg, "ser") || !strcmp(arg, "ser1")) { + /* Mac modem port */ + mac_init_scc_port(B9600|CS8, 0); + mac_console_driver.write = mac_scca_console_write; + scc_port = 0; + } else if (!strcmp(arg, "ser2")) { + /* Mac printer port */ + mac_init_scc_port(B9600|CS8, 1); + mac_console_driver.write = mac_sccb_console_write; + scc_port = 1; + } #endif #ifdef DEBUG_HEADS - if ( !strcmp( m68k_debug_device, "scn" ) - || !strcmp( m68k_debug_device, "con" )) { - /* display, using head.S console routines */ - mac_console_driver.write = mac_debug_console_write; - } + if (!strcmp(arg, "scn") || !strcmp(arg, "con")) { + /* display, using head.S console routines */ + mac_console_driver.write = mac_debug_console_write; + } #endif - if (mac_console_driver.write) - register_console(&mac_console_driver); + if (mac_console_driver.write) + register_console(&mac_console_driver); + return 0; } -/* - * Local variables: - * c-indent-level: 4 - * tab-width: 8 - * End: - */ +early_param("debug", mac_debug_setup); |