diff options
Diffstat (limited to 'arch/h8300')
64 files changed, 8135 insertions, 0 deletions
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig new file mode 100644 index 00000000000..62a89e812e3 --- /dev/null +++ b/arch/h8300/Kconfig @@ -0,0 +1,194 @@ +# +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/config-language.txt. +# + +mainmenu "uClinux/h8300 (w/o MMU) Kernel Configuration" + +config H8300 + bool + default y + +config MMU + bool + default n + +config SWAP + bool + default n + +config FPU + bool + default n + +config UID16 + bool + default y + +config RWSEM_GENERIC_SPINLOCK + bool + default y + +config RWSEM_XCHGADD_ALGORITHM + bool + default n + +config GENERIC_CALIBRATE_DELAY + bool + default y + +config ISA + bool + default y + +config PCI + bool + default n + +source "init/Kconfig" + +source "arch/h8300/Kconfig.cpu" + +menu "Executable file formats" + +source "fs/Kconfig.binfmt" + +endmenu + +source "drivers/base/Kconfig" + +source "drivers/mtd/Kconfig" + +source "drivers/block/Kconfig" + +source "drivers/ide/Kconfig" + +source "arch/h8300/Kconfig.ide" + +source "net/Kconfig" + +# +# input - input/joystick depends on it. As does USB. +# +source "drivers/input/Kconfig" + +menu "Character devices" + +config VT + bool "Virtual terminal" + ---help--- + If you say Y here, you will get support for terminal devices with + display and keyboard devices. These are called "virtual" because you + can run several virtual terminals (also called virtual consoles) on + one physical terminal. This is rather useful, for example one + virtual terminal can collect system messages and warnings, another + one can be used for a text-mode user session, and a third could run + an X session, all in parallel. Switching between virtual terminals + is done with certain key combinations, usually Alt-<function key>. + + The setterm command ("man setterm") can be used to change the + properties (such as colors or beeping) of a virtual terminal. The + man page console_codes(4) ("man console_codes") contains the special + character sequences that can be used to change those properties + directly. The fonts used on virtual terminals can be changed with + the setfont ("man setfont") command and the key bindings are defined + with the loadkeys ("man loadkeys") command. + + You need at least one virtual terminal device in order to make use + of your keyboard and monitor. Therefore, only people configuring an + embedded system would want to say N here in order to save some + memory; the only way to log into such a system is then via a serial + or network connection. + + If unsure, say Y, or else you won't be able to do much with your new + shiny Linux system :-) + +config VT_CONSOLE + bool "Support for console on virtual terminal" + depends on VT + ---help--- + The system console is the device which receives all kernel messages + and warnings and which allows logins in single user mode. If you + answer Y here, a virtual terminal (the device used to interact with + a physical terminal) can be used as system console. This is the most + common mode of operations, so you should say Y here unless you want + the kernel messages be output only to a serial port (in which case + you should say Y to "Console on serial port", below). + + If you do say Y here, by default the currently visible virtual + terminal (/dev/tty0) will be used as system console. You can change + that with a kernel command line option such as "console=tty3" which + would use the third virtual terminal as system console. (Try "man + bootparam" or see the documentation of your boot loader (lilo or + loadlin) about how to pass options to the kernel at boot time.) + + If unsure, say Y. + +config HW_CONSOLE + bool + depends on VT && !S390 && !UM + default y + +comment "Unix98 PTY support" + +config UNIX98_PTYS + bool "Unix98 PTY support" + ---help--- + A pseudo terminal (PTY) is a software device consisting of two + halves: a master and a slave. The slave device behaves identical to + a physical terminal; the master device is used by a process to + read data from and write data to the slave, thereby emulating a + terminal. Typical programs for the master side are telnet servers + and xterms. + + Linux has traditionally used the BSD-like names /dev/ptyxx for + masters and /dev/ttyxx for slaves of pseudo terminals. This scheme + has a number of problems. The GNU C library glibc 2.1 and later, + however, supports the Unix98 naming standard: in order to acquire a + pseudo terminal, a process opens /dev/ptmx; the number of the pseudo + terminal is then made available to the process and the pseudo + terminal slave can be accessed as /dev/pts/<number>. What was + traditionally /dev/ttyp2 will then be /dev/pts/2, for example. + + The entries in /dev/pts/ are created on the fly by a virtual + file system; therefore, if you say Y here you should say Y to + "/dev/pts file system for Unix98 PTYs" as well. + + If you want to say Y here, you need to have the C library glibc 2.1 + or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*"). + Read the instructions in <file:Documentation/Changes> pertaining to + pseudo terminals. It's safe to say N. + +config UNIX98_PTY_COUNT + int "Maximum number of Unix98 PTYs in use (0-2048)" + depends on UNIX98_PTYS + default "256" + help + The maximum number of Unix98 PTYs that can be used at any one time. + The default is 256, and should be enough for desktop systems. Server + machines which support incoming telnet/rlogin/ssh connections and/or + serve several X terminals may want to increase this: every incoming + connection and every xterm uses up one PTY. + + When not in use, each additional set of 256 PTYs occupy + approximately 8 KB of kernel memory on 32-bit architectures. + +source "drivers/char/pcmcia/Kconfig" + +source "drivers/serial/Kconfig" + +source "drivers/i2c/Kconfig" + +source "drivers/usb/Kconfig" + +endmenu + +source "fs/Kconfig" + +source "arch/h8300/Kconfig.debug" + +source "security/Kconfig" + +source "crypto/Kconfig" + +source "lib/Kconfig" diff --git a/arch/h8300/Kconfig.cpu b/arch/h8300/Kconfig.cpu new file mode 100644 index 00000000000..d9dd62a565a --- /dev/null +++ b/arch/h8300/Kconfig.cpu @@ -0,0 +1,183 @@ +menu "Processor type and features" + +choice + prompt "H8/300 platform" + default H8300H_GENERIC + +config H8300H_GENERIC + bool "H8/300H Generic" + help + H8/300H CPU Generic Hardware Support + +config H8300H_AKI3068NET + bool "AE-3068/69" + help + AKI-H8/3068F / AKI-H8/3069F Flashmicom LAN Board Support + More Information. (Japanese Only) + <http://akizukidensi.com/catalog/h8.html> + AE-3068/69 Evaluation Board Support + More Information. + <http://www.microtronique.com/ae3069lan.htm> + +config H8300H_H8MAX + bool "H8MAX" + help + H8MAX Evaluation Board Support + More Information. (Japanese Only) + <http://strawberry-linux.com/h8/index.html> + +config H8300H_SIM + bool "H8/300H Simulator" + help + GDB Simulator Support + More Information. + arch/h8300/Doc/simulator.txt + +config H8S_GENERIC + bool "H8S Generic" + help + H8S CPU Generic Hardware Support + +config H8S_EDOSK2674 + bool "EDOSK-2674" + help + Renesas EDOSK-2674 Evaluation Board Support + More Information. + <http://www.azpower.com/H8-uClinux/index.html> + <http://www.eu.renesas.com/tools/edk/support/edosk2674.html> + +config H8S_SIM + bool "H8S Simulator" + help + GDB Simulator Support + More Information. + arch/h8300/Doc/simulator.txt + +endchoice + +if (H8300H_GENERIC || H8S_GENERIC) +menu "Detail Selection" +if (H8300H_GENERIC) +choice + prompt "CPU Selection" + +config H83002 + bool "H8/3001,3002,3003" + +config H83007 + bool "H8/3006,3007" + +config H83048 + bool "H8/3044,3045,3046,3047,3048,3052" + +config H83068 + bool "H8/3065,3066,3067,3068,3069" +endchoice +endif + +if (H8S_GENERIC) +choice + prompt "CPU Selection" + +config H8S2678 + bool "H8S/2670,2673,2674R,2675,2676" +endchoice +endif + +config CPU_CLOCK + int "CPU Clock Frequency (/1KHz)" + default "20000" + help + CPU Clock Frequency divide to 1000 +endmenu +endif + +if (H8300H_GENERIC || H8S_GENERIC || H8300H_SIM || H8S_SIM || H8S_EDOSK2674) +choice + prompt "Kernel executes from" + ---help--- + Choose the memory type that the kernel will be running in. + +config RAMKERNEL + bool "RAM" + help + The kernel will be resident in RAM when running. + +config ROMKERNEL + bool "ROM" + help + The kernel will be resident in FLASH/ROM when running. + +endchoice +endif + +if (H8300H_AKI3068NET) +config H83068 + bool + default y + +config CPU_CLOCK + int + default "20000" + +config RAMKERNEL + bool + default y +endif + +if (H8300H_H8MAX) +config H83068 + bool + default y + +config CPU_CLOCK + int + default 25000 + +config RAMKERNEL + bool + default y +endif + +if (H8300H_SIM) +config H83007 + bool + default y + +config CPU_CLOCK + int + default "16000" +endif + +if (H8S_EDOSK2674) +config H8S2678 + bool + default y +config CPU_CLOCK + int + default 33000 +endif + +if (H8S_SIM) +config H8S2678 + bool + default y +config CPU_CLOCK + int + default 33000 +endif + +config CPU_H8300H + bool + depends on (H8002 || H83007 || H83048 || H83068) + default y + +config CPU_H8S + bool + depends on H8S2678 + default y + +config PREEMPT + bool "Preemptible Kernel" + default n +endmenu diff --git a/arch/h8300/Kconfig.debug b/arch/h8300/Kconfig.debug new file mode 100644 index 00000000000..55034d08abf --- /dev/null +++ b/arch/h8300/Kconfig.debug @@ -0,0 +1,68 @@ +menu "Kernel hacking" + +source "lib/Kconfig.debug" + +config FULLDEBUG + bool "Full Symbolic/Source Debugging support" + help + Enable debugging symbols on kernel build. + +config HIGHPROFILE + bool "Use fast second timer for profiling" + help + Use a fast secondary clock to produce profiling information. + +config NO_KERNEL_MSG + bool "Suppress Kernel BUG Messages" + help + Do not output any debug BUG messages within the kernel. + +config GDB_MAGICPRINT + bool "Message Output for GDB MagicPrint service" + depends on (H8300H_SIM || H8S_SIM) + help + kernel messages output useing MagicPrint service from GDB + +config SYSCALL_PRINT + bool "SystemCall trace print" + help + outout history of systemcall + +config GDB_DEBUG + bool "Use gdb stub" + depends on (!H8300H_SIM && !H8S_SIM) + help + gdb stub exception support + +config CONFIG_SH_STANDARD_BIOS + bool "Use gdb protocol serial console" + depends on (!H8300H_SIM && !H8S_SIM) + help + serial console output using GDB protocol. + Require eCos/RedBoot + +config DEFAULT_CMDLINE + bool "Use buildin commandline" + default n + help + buildin kernel commandline enabled. + +config KERNEL_COMMAND + string "Buildin commmand string" + depends on DEFAULT_CMDLINE + help + buildin kernel commandline strings. + +config BLKDEV_RESERVE + bool "BLKDEV Reserved Memory" + default n + help + Reserved BLKDEV area. + +config CONFIG_BLKDEV_RESERVE_ADDRESS + hex 'start address' + depends on BLKDEV_RESERVE + help + BLKDEV start address. + +endmenu diff --git a/arch/h8300/Kconfig.ide b/arch/h8300/Kconfig.ide new file mode 100644 index 00000000000..a38a63054ac --- /dev/null +++ b/arch/h8300/Kconfig.ide @@ -0,0 +1,44 @@ +# uClinux H8/300 Target Board Selection Menu (IDE) + +if (H8300H_AKI3068NET) +menu "IDE Extra configuration" + +config H8300_IDE_BASE + hex "IDE register base address" + depends on IDE + default 0 + help + IDE registers base address + +config H8300_IDE_ALT + hex "IDE register alternate address" + depends on IDE + default 0 + help + IDE alternate registers address + +config H8300_IDE_IRQ + int "IDE IRQ no" + depends on IDE + default 0 + help + IDE use IRQ no +endmenu +endif + +if (H8300H_H8MAX) +config H8300_IDE_BASE + hex + depends on IDE + default 0x200000 + +config H8300_IDE_ALT + hex + depends on IDE + default 0x60000c + +config H8300_IDE_IRQ + int + depends on IDE + default 5 +endif diff --git a/arch/h8300/Makefile b/arch/h8300/Makefile new file mode 100644 index 00000000000..c9b80cffd71 --- /dev/null +++ b/arch/h8300/Makefile @@ -0,0 +1,78 @@ +# +# arch/h8300/Makefile +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# (C) Copyright 2002,2003 Yoshinori Sato <ysato@users.sourceforge.jp> +# + +platform-$(CONFIG_CPU_H8300H) := h8300h +platform-$(CONFIG_CPU_H8S) := h8s +PLATFORM := $(platform-y) + +board-$(CONFIG_H8300H_GENERIC) := generic +board-$(CONFIG_H8300H_AKI3068NET) := aki3068net +board-$(CONFIG_H8300H_H8MAX) := h8max +board-$(CONFIG_H8300H_SIM) := generic +board-$(CONFIG_H8S_GENERIC) := generic +board-$(CONFIG_H8S_EDOSK2674) := edosk2674 +board-$(CONFIG_H8S_SIM) := generic +BOARD := $(board-y) + +model-$(CONFIG_RAMKERNEL) := ram +model-$(CONFIG_ROMKERNEL) := rom +MODEL := $(model-y) + +cflags-$(CONFIG_CPU_H8300H) := -mh +ldflags-$(CONFIG_CPU_H8300H) := -mh8300helf +cflags-$(CONFIG_CPU_H8S) := -ms +ldflags-$(CONFIG_CPU_H8S) := -mh8300self + +CFLAGS += $(cflags-y) +CFLAGS += -mint32 -fno-builtin +CFLAGS += -g +CFLAGS += -D__linux__ +CFLAGS += -DUTS_SYSNAME=\"uClinux\" +AFLAGS += -DPLATFORM=$(PLATFORM) -DMODEL=$(MODEL) $(cflags-y) +LDFLAGS += $(ldflags-y) + +CROSS_COMPILE = h8300-elf- +LIBGCC := $(shell $(CROSS-COMPILE)$(CC) $(CFLAGS) -print-libgcc-file-name) + +head-y := arch/$(ARCH)/platform/$(platform-y)/$(board-y)/crt0_$(model-y).o + +core-y += arch/$(ARCH)/kernel/ \ + arch/$(ARCH)/mm/ +ifdef PLATFORM +core-y += arch/$(ARCH)/platform/$(PLATFORM)/ \ + arch/$(ARCH)/platform/$(PLATFORM)/$(BOARD)/ +endif + +libs-y += arch/$(ARCH)/lib/ $(LIBGCC) + +boot := arch/h8300/boot + +export MODEL PLATFORM BOARD + +archmrproper: + +archclean: + $(Q)$(MAKE) $(clean)=$(boot) + +prepare: include/asm-$(ARCH)/asm-offsets.h + +include/asm-$(ARCH)/asm-offsets.h: arch/$(ARCH)/kernel/asm-offsets.s \ + include/asm include/linux/version.h + $(call filechk,gen-asm-offsets) + +vmlinux.srec vmlinux.bin: vmlinux + $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ + +define archhelp + echo 'vmlinux.bin - Create raw binary' + echo 'vmlinux.srec - Create srec binary' +endef + +CLEAN_FILES += include/asm-$(ARCH)/asm-offsets.h diff --git a/arch/h8300/README b/arch/h8300/README new file mode 100644 index 00000000000..2fd6f6d7a01 --- /dev/null +++ b/arch/h8300/README @@ -0,0 +1,37 @@ +linux-2.6 for H8/300 README +Yoshinori Sato <ysato@users.sourceforge.jp> + +* Supported CPU +H8/300H and H8S + +* Supported Target +1.simulator of GDB + require patches. + +2.AE 3068/AE 3069 + more information + MICROTRONIQUE <http://www.microtronique.com/> + Akizuki Denshi Tsusho Ltd. <http://www.akizuki.ne.jp> (Japanese Only) + +3.H8MAX + see http://ip-sol.jp/h8max/ (Japanese Only) + +4.EDOSK2674 + see http://www.eu.renesas.com/products/mpumcu/tool/edk/support/edosk2674.html + http://www.azpower.com/H8-uClinux/ + +* Toolchain Version +gcc-3.1 or higher and patch +see arch/h8300/tools_patch/README +binutils-2.12 or higher +gdb-5.2 or higher +The environment that can compile a h8300-elf binary is necessary. + +* Userland Develop environment +used h8300-elf toolchains. +see http://www.uclinux.org/pub/uClinux/ports/h8/ + +* A few words of thanks +Porting to H8/300 serieses is support of Information-technology Promotion Agency, Japan. +I thank support. +and All developer/user. diff --git a/arch/h8300/boot/Makefile b/arch/h8300/boot/Makefile new file mode 100644 index 00000000000..65086d925ca --- /dev/null +++ b/arch/h8300/boot/Makefile @@ -0,0 +1,12 @@ +# arch/h8300/boot/Makefile + +targets := vmlinux.srec vmlinux.bin + +OBJCOPYFLAGS_vmlinux.srec := -Osrec +OBJCOPYFLAGS_vmlinux.bin := -Obinary + +$(obj)/vmlinux.srec $(obj)/vmlinux.bin: vmlinux FORCE + $(call if_changed,objcopy) + @echo ' Kernel: $@ is ready' + +CLEAN_FILES += arch/$(ARCH)/vmlinux.bin arch/$(ARCH)/vmlinux.srec diff --git a/arch/h8300/defconfig b/arch/h8300/defconfig new file mode 100644 index 00000000000..9d9b491cfc2 --- /dev/null +++ b/arch/h8300/defconfig @@ -0,0 +1,356 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.11-rc1 +# Sun Jan 16 17:24:38 2005 +# +CONFIG_H8300=y +# CONFIG_MMU is not set +# CONFIG_SWAP is not set +# CONFIG_FPU is not set +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ISA=y +# CONFIG_PCI is not set + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_SYSCTL is not set +# CONFIG_AUDIT is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_HOTPLUG is not set +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_TINY_SHMEM=y + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Processor type and features +# +CONFIG_H8300H_GENERIC=y +# CONFIG_H8300H_AKI3068NET is not set +# CONFIG_H8300H_H8MAX is not set +# CONFIG_H8300H_SIM is not set +# CONFIG_H8S_GENERIC is not set +# CONFIG_H8S_EDOSK2674 is not set +# CONFIG_H8S_SIM is not set + +# +# Detail Selection +# +# CONFIG_H83002 is not set +# CONFIG_H83007 is not set +# CONFIG_H83048 is not set +CONFIG_H83068=y +CONFIG_CPU_CLOCK=20000 +# CONFIG_RAMKERNEL is not set +CONFIG_ROMKERNEL=y +CONFIG_CPU_H8300H=y +# CONFIG_PREEMPT is not set + +# +# Executable file formats +# +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CONCAT=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_RAM=y +CONFIG_MTD_ROM=y +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_UCLINUX=y + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_XD is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# Networking support +# +# CONFIG_NET is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Userland interfaces +# + +# +# Input I/O drivers +# +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y +# CONFIG_SERIO is not set +# CONFIG_SERIO_I8042 is not set + +# +# Input Device Drivers +# + +# +# Character devices +# +# CONFIG_VT is not set + +# +# Unix98 PTY support +# +# CONFIG_UNIX98_PTYS is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_ROMFS_FS=y +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_SYSFS is not set +# CONFIG_DEVFS_FS is not set +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Kernel hacking +# +CONFIG_DEBUG_KERNEL=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_FS is not set +CONFIG_FULLDEBUG=y +# CONFIG_HIGHPROFILE is not set +CONFIG_NO_KERNEL_MSG=y +# CONFIG_SYSCALL_PRINT is not set +# CONFIG_GDB_DEBUG is not set +# CONFIG_CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_DEFAULT_CMDLINE is not set +# CONFIG_BLKDEV_RESERVE is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y diff --git a/arch/h8300/kernel/Makefile b/arch/h8300/kernel/Makefile new file mode 100644 index 00000000000..71b6131e98b --- /dev/null +++ b/arch/h8300/kernel/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for the linux kernel. +# + +extra-y := vmlinux.lds + +obj-y := process.o traps.o ptrace.o ints.o \ + sys_h8300.o time.o semaphore.o signal.o \ + setup.o gpio.o init_task.o syscalls.o + +obj-$(CONFIG_MODULES) += module.o h8300_ksyms.o diff --git a/arch/h8300/kernel/asm-offsets.c b/arch/h8300/kernel/asm-offsets.c new file mode 100644 index 00000000000..b78b82ad28a --- /dev/null +++ b/arch/h8300/kernel/asm-offsets.c @@ -0,0 +1,65 @@ +/* + * This program is used to generate definitions needed by + * assembly language modules. + * + * We use the technique used in the OSF Mach kernel code: + * generate asm statements containing #defines, + * compile this file to assembler, and then extract the + * #defines from the assembly-language output. + */ + +#include <linux/stddef.h> +#include <linux/sched.h> +#include <linux/kernel_stat.h> +#include <linux/ptrace.h> +#include <linux/hardirq.h> +#include <asm/bootinfo.h> +#include <asm/irq.h> +#include <asm/ptrace.h> + +#define DEFINE(sym, val) \ + asm volatile("\n->" #sym " %0 " #val : : "i" (val)) + +#define BLANK() asm volatile("\n->" : : ) + +int main(void) +{ + /* offsets into the task struct */ + DEFINE(TASK_STATE, offsetof(struct task_struct, state)); + DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags)); + DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace)); + DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked)); + DEFINE(TASK_THREAD, offsetof(struct task_struct, thread)); + DEFINE(TASK_THREAD_INFO, offsetof(struct task_struct, thread_info)); + DEFINE(TASK_MM, offsetof(struct task_struct, mm)); + DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm)); + + /* offsets into the irq_cpustat_t struct */ + DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending)); + + /* offsets into the thread struct */ + DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp)); + DEFINE(THREAD_USP, offsetof(struct thread_struct, usp)); + DEFINE(THREAD_CCR, offsetof(struct thread_struct, ccr)); + + /* offsets into the pt_regs struct */ + DEFINE(LER0, offsetof(struct pt_regs, er0) - sizeof(long)); + DEFINE(LER1, offsetof(struct pt_regs, er1) - sizeof(long)); + DEFINE(LER2, offsetof(struct pt_regs, er2) - sizeof(long)); + DEFINE(LER3, offsetof(struct pt_regs, er3) - sizeof(long)); + DEFINE(LER4, offsetof(struct pt_regs, er4) - sizeof(long)); + DEFINE(LER5, offsetof(struct pt_regs, er5) - sizeof(long)); + DEFINE(LER6, offsetof(struct pt_regs, er6) - sizeof(long)); + DEFINE(LORIG, offsetof(struct pt_regs, orig_er0) - sizeof(long)); + DEFINE(LCCR, offsetof(struct pt_regs, ccr) - sizeof(long)); + DEFINE(LVEC, offsetof(struct pt_regs, vector) - sizeof(long)); +#if defined(__H8300S__) + DEFINE(LEXR, offsetof(struct pt_regs, exr) - sizeof(long)); +#endif + DEFINE(LRET, offsetof(struct pt_regs, pc) - sizeof(long)); + + DEFINE(PT_PTRACED, PT_PTRACED); + DEFINE(PT_DTRACE, PT_DTRACE); + + return 0; +} diff --git a/arch/h8300/kernel/gpio.c b/arch/h8300/kernel/gpio.c new file mode 100644 index 00000000000..795682b873e --- /dev/null +++ b/arch/h8300/kernel/gpio.c @@ -0,0 +1,174 @@ +/* + * linux/arch/h8300/kernel/gpio.c + * + * Yoshinori Sato <ysato@users.sourceforge.jp> + * + */ + +/* + * Internal I/O Port Management + */ + +#include <linux/config.h> +#include <linux/stddef.h> +#include <linux/proc_fs.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/fs.h> +#include <linux/init.h> + +#define _(addr) (volatile unsigned char *)(addr) +#if defined(CONFIG_H83007) || defined(CONFIG_H83068) +#include <asm/regs306x.h> +static volatile unsigned char *ddrs[] = { + _(P1DDR),_(P2DDR),_(P3DDR),_(P4DDR),_(P5DDR),_(P6DDR), + NULL, _(P8DDR),_(P9DDR),_(PADDR),_(PBDDR), +}; +#define MAX_PORT 11 +#endif + + #if defined(CONFIG_H83002) || defined(CONFIG_H8048) +/* Fix me!! */ +#include <asm/regs306x.h> +static volatile unsigned char *ddrs[] = { + _(P1DDR),_(P2DDR),_(P3DDR),_(P4DDR),_(P5DDR),_(P6DDR), + NULL, _(P8DDR),_(P9DDR),_(PADDR),_(PBDDR), +}; +#define MAX_PORT 11 +#endif + +#if defined(CONFIG_H8S2678) +#include <asm/regs267x.h> +static volatile unsigned char *ddrs[] = { + _(P1DDR),_(P2DDR),_(P3DDR),NULL ,_(P5DDR),_(P6DDR), + _(P7DDR),_(P8DDR),NULL, _(PADDR),_(PBDDR),_(PCDDR), + _(PDDDR),_(PEDDR),_(PFDDR),_(PGDDR),_(PHDDR), + _(PADDR),_(PBDDR),_(PCDDR),_(PDDDR),_(PEDDR),_(PFDDR), + _(PGDDR),_(PHDDR) +}; +#define MAX_PORT 17 +#endif +#undef _ + +#if !defined(P1DDR) +#error Unsuppoted CPU Selection +#endif + +static struct { + unsigned char used; + unsigned char ddr; +} gpio_regs[MAX_PORT]; + +extern char *_platform_gpio_table(int length); + +int h8300_reserved_gpio(int port, unsigned int bits) +{ + unsigned char *used; + + if (port < 0 || port >= MAX_PORT) + return -1; + used = &(gpio_regs[port].used); + if ((*used & bits) != 0) + return 0; + *used |= bits; + return 1; +} + +int h8300_free_gpio(int port, unsigned int bits) +{ + unsigned char *used; + + if (port < 0 || port >= MAX_PORT) + return -1; + used = &(gpio_regs[port].used); + if ((*used & bits) != bits) + return 0; + *used &= (~bits); + return 1; +} + +int h8300_set_gpio_dir(int port_bit,int dir) +{ + int port = (port_bit >> 8) & 0xff; + int bit = port_bit & 0xff; + + if (ddrs[port] == NULL) + return 0; + if (gpio_regs[port].used & bit) { + if (dir) + gpio_regs[port].ddr |= bit; + else + gpio_regs[port].ddr &= ~bit; + *ddrs[port] = gpio_regs[port].ddr; + return 1; + } else + return 0; +} + +int h8300_get_gpio_dir(int port_bit) +{ + int port = (port_bit >> 8) & 0xff; + int bit = port_bit & 0xff; + + if (ddrs[port] == NULL) + return 0; + if (gpio_regs[port].used & bit) { + return (gpio_regs[port].ddr & bit) != 0; + } else + return -1; +} + +#if defined(CONFIG_PROC_FS) +static char *port_status(int portno) +{ + static char result[10]; + const static char io[2]={'I','O'}; + char *rp; + int c; + unsigned char used,ddr; + + used = gpio_regs[portno].used; + ddr = gpio_regs[portno].ddr; + result[8]='\0'; + rp = result + 7; + for (c = 8; c > 0; c--,rp--,used >>= 1, ddr >>= 1) + if (used & 0x01) + *rp = io[ ddr & 0x01]; + else + *rp = '-'; + return result; +} + +static int gpio_proc_read(char *buf, char **start, off_t offset, + int len, int *unused_i, void *unused_v) +{ + int c,outlen; + const static char port_name[]="123456789ABCDEFGH"; + outlen = 0; + for (c = 0; c < MAX_PORT; c++) { + if (ddrs[c] == NULL) + continue ; + len = sprintf(buf,"P%c: %s\n",port_name[c],port_status(c)); + buf += len; + outlen += len; + } + return outlen; +} + +static __init int register_proc(void) +{ + struct proc_dir_entry *proc_gpio; + + proc_gpio = create_proc_entry("gpio", S_IRUGO, NULL); + if (proc_gpio) + proc_gpio->read_proc = gpio_proc_read; + return proc_gpio != NULL; +} + +__initcall(register_proc); +#endif + +void __init h8300_gpio_init(void) +{ + memcpy(gpio_regs,_platform_gpio_table(sizeof(gpio_regs)),sizeof(gpio_regs)); +} diff --git a/arch/h8300/kernel/h8300_ksyms.c b/arch/h8300/kernel/h8300_ksyms.c new file mode 100644 index 00000000000..5a630233112 --- /dev/null +++ b/arch/h8300/kernel/h8300_ksyms.c @@ -0,0 +1,112 @@ +#include <linux/module.h> +#include <linux/linkage.h> +#include <linux/sched.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/user.h> +#include <linux/elfcore.h> +#include <linux/in6.h> +#include <linux/interrupt.h> +#include <linux/config.h> + +#include <asm/setup.h> +#include <asm/pgalloc.h> +#include <asm/irq.h> +#include <asm/io.h> +#include <asm/semaphore.h> +#include <asm/checksum.h> +#include <asm/current.h> +#include <asm/gpio.h> + +//asmlinkage long long __ashrdi3 (long long, int); +//asmlinkage long long __lshrdi3 (long long, int); +extern char h8300_debug_device[]; + +extern void dump_thread(struct pt_regs *, struct user *); + +/* platform dependent support */ + +EXPORT_SYMBOL(dump_thread); +EXPORT_SYMBOL(strnlen); +EXPORT_SYMBOL(strrchr); +EXPORT_SYMBOL(strstr); +EXPORT_SYMBOL(strchr); +EXPORT_SYMBOL(strcat); +EXPORT_SYMBOL(strlen); +EXPORT_SYMBOL(strcmp); +EXPORT_SYMBOL(strncmp); + +EXPORT_SYMBOL(ip_fast_csum); + +EXPORT_SYMBOL(kernel_thread); +EXPORT_SYMBOL(enable_irq); +EXPORT_SYMBOL(disable_irq); + +/* Networking helper routines. */ +EXPORT_SYMBOL(csum_partial_copy); + +/* The following are special because they're not called + explicitly (the C compiler generates them). Fortunately, + their interface isn't gonna change any time soon now, so + it's OK to leave it out of version control. */ +//EXPORT_SYMBOL(__ashrdi3); +//EXPORT_SYMBOL(__lshrdi3); +EXPORT_SYMBOL(memcpy); +EXPORT_SYMBOL(memset); +EXPORT_SYMBOL(memcmp); +EXPORT_SYMBOL(memscan); +EXPORT_SYMBOL(memmove); + +EXPORT_SYMBOL(get_wchan); + +/* + * libgcc functions - functions that are used internally by the + * compiler... (prototypes are not correct though, but that + * doesn't really matter since they're not versioned). + */ +extern void __gcc_bcmp(void); +extern void __ashldi3(void); +extern void __ashrdi3(void); +extern void __cmpdi2(void); +extern void __divdi3(void); +extern void __divsi3(void); +extern void __lshrdi3(void); +extern void __moddi3(void); +extern void __modsi3(void); +extern void __muldi3(void); +extern void __mulsi3(void); +extern void __negdi2(void); +extern void __ucmpdi2(void); +extern void __udivdi3(void); +extern void __udivmoddi4(void); +extern void __udivsi3(void); +extern void __umoddi3(void); +extern void __umodsi3(void); + + /* gcc lib functions */ +EXPORT_SYMBOL(__gcc_bcmp); +EXPORT_SYMBOL(__ashldi3); +EXPORT_SYMBOL(__ashrdi3); +EXPORT_SYMBOL(__cmpdi2); +EXPORT_SYMBOL(__divdi3); +EXPORT_SYMBOL(__divsi3); +EXPORT_SYMBOL(__lshrdi3); +EXPORT_SYMBOL(__moddi3); +EXPORT_SYMBOL(__modsi3); +EXPORT_SYMBOL(__muldi3); +EXPORT_SYMBOL(__mulsi3); +EXPORT_SYMBOL(__negdi2); +EXPORT_SYMBOL(__ucmpdi2); +EXPORT_SYMBOL(__udivdi3); +EXPORT_SYMBOL(__udivmoddi4); +EXPORT_SYMBOL(__udivsi3); +EXPORT_SYMBOL(__umoddi3); +EXPORT_SYMBOL(__umodsi3); + +#ifdef MAGIC_ROM_PTR +EXPORT_SYMBOL(is_in_rom); +#endif + +EXPORT_SYMBOL(h8300_reserved_gpio); +EXPORT_SYMBOL(h8300_free_gpio); +EXPORT_SYMBOL(h8300_set_gpio_dir); diff --git a/arch/h8300/kernel/init_task.c b/arch/h8300/kernel/init_task.c new file mode 100644 index 00000000000..19272c2ac56 --- /dev/null +++ b/arch/h8300/kernel/init_task.c @@ -0,0 +1,43 @@ +/* + * linux/arch/h8300/kernel/init_task.c + */ +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/init_task.h> +#include <linux/fs.h> +#include <linux/mqueue.h> + +#include <asm/uaccess.h> +#include <asm/pgtable.h> + +static struct fs_struct init_fs = INIT_FS; +static struct files_struct init_files = INIT_FILES; +static struct signal_struct init_signals = INIT_SIGNALS(init_signals); +static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); +struct mm_struct init_mm = INIT_MM(init_mm); + +EXPORT_SYMBOL(init_mm); + +/* + * Initial task structure. + * + * All other task structs will be allocated on slabs in fork.c + */ +__asm__(".align 4"); +struct task_struct init_task = INIT_TASK(init_task); + +EXPORT_SYMBOL(init_task); + +/* + * Initial thread structure. + * + * We need to make sure that this is 8192-byte aligned due to the + * way process stacks are handled. This is done by having a special + * "init_task" linker map entry.. + */ +union thread_union init_thread_union + __attribute__((__section__(".data.init_task"))) = + { INIT_THREAD_INFO(init_task) }; + diff --git a/arch/h8300/kernel/ints.c b/arch/h8300/kernel/ints.c new file mode 100644 index 00000000000..edb3c417001 --- /dev/null +++ b/arch/h8300/kernel/ints.c @@ -0,0 +1,255 @@ +/* + * linux/arch/h8300/platform/h8300h/ints.c + * + * Yoshinori Sato <ysato@users.sourceforge.jp> + * + * Based on linux/arch/$(ARCH)/platform/$(PLATFORM)/ints.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + * + * Copyright 1996 Roman Zippel + * Copyright 1999 D. Jeff Dionne <jeff@rt-control.com> + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/kernel_stat.h> +#include <linux/seq_file.h> +#include <linux/init.h> +#include <linux/random.h> +#include <linux/bootmem.h> +#include <linux/hardirq.h> + +#include <asm/system.h> +#include <asm/irq.h> +#include <asm/traps.h> +#include <asm/io.h> +#include <asm/setup.h> +#include <asm/errno.h> + +/* + * This structure has only 4 elements for speed reasons + */ +typedef struct irq_handler { + irqreturn_t (*handler)(int, void *, struct pt_regs *); + int flags; + int count; + void *dev_id; + const char *devname; +} irq_handler_t; + +static irq_handler_t *irq_list[NR_IRQS]; +static int use_kmalloc; + +extern unsigned long *interrupt_redirect_table; +extern const int h8300_saved_vectors[]; +extern const unsigned long h8300_trap_table[]; +int h8300_enable_irq_pin(unsigned int irq); +void h8300_disable_irq_pin(unsigned int irq); + +#define CPU_VECTOR ((unsigned long *)0x000000) +#define ADDR_MASK (0xffffff) + +#if defined(CONFIG_RAMKERNEL) +static unsigned long __init *get_vector_address(void) +{ + unsigned long *rom_vector = CPU_VECTOR; + unsigned long base,tmp; + int vec_no; + + base = rom_vector[EXT_IRQ0] & ADDR_MASK; + + /* check romvector format */ + for (vec_no = EXT_IRQ1; vec_no <= EXT_IRQ0+EXT_IRQS; vec_no++) { + if ((base+(vec_no - EXT_IRQ0)*4) != (rom_vector[vec_no] & ADDR_MASK)) + return NULL; + } + + /* ramvector base address */ + base -= EXT_IRQ0*4; + + /* writerble check */ + tmp = ~(*(volatile unsigned long *)base); + (*(volatile unsigned long *)base) = tmp; + if ((*(volatile unsigned long *)base) != tmp) + return NULL; + return (unsigned long *)base; +} +#endif + +void __init init_IRQ(void) +{ +#if defined(CONFIG_RAMKERNEL) + int i; + unsigned long *ramvec,*ramvec_p; + const unsigned long *trap_entry; + const int *saved_vector; + + ramvec = get_vector_address(); + if (ramvec == NULL) + panic("interrupt vector serup failed."); + else + printk(KERN_INFO "virtual vector at 0x%08lx\n",(unsigned long)ramvec); + + /* create redirect table */ + ramvec_p = ramvec; + trap_entry = h8300_trap_table; + saved_vector = h8300_saved_vectors; + for ( i = 0; i < NR_IRQS; i++) { + if (i == *saved_vector) { + ramvec_p++; + saved_vector++; + } else { + if ( i < NR_TRAPS ) { + if (*trap_entry) + *ramvec_p = VECTOR(*trap_entry); + ramvec_p++; + trap_entry++; + } else + *ramvec_p++ = REDIRECT(interrupt_entry); + } + } + interrupt_redirect_table = ramvec; +#ifdef DUMP_VECTOR + ramvec_p = ramvec; + for (i = 0; i < NR_IRQS; i++) { + if ((i % 8) == 0) + printk(KERN_DEBUG "\n%p: ",ramvec_p); + printk(KERN_DEBUG "%p ",*ramvec_p); + ramvec_p++; + } + printk(KERN_DEBUG "\n"); +#endif +#endif +} + +int request_irq(unsigned int irq, + irqreturn_t (*handler)(int, void *, struct pt_regs *), + unsigned long flags, const char *devname, void *dev_id) +{ + irq_handler_t *irq_handle; + if (irq < 0 || irq >= NR_IRQS) { + printk(KERN_ERR "Incorrect IRQ %d from %s\n", irq, devname); + return -EINVAL; + } + + if (irq_list[irq] || (h8300_enable_irq_pin(irq) == -EBUSY)) + return -EBUSY; + + if (use_kmalloc) + irq_handle = (irq_handler_t *)kmalloc(sizeof(irq_handler_t), GFP_ATOMIC); + else { + /* use bootmem allocater */ + irq_handle = (irq_handler_t *)alloc_bootmem(sizeof(irq_handler_t)); + irq_handle = (irq_handler_t *)((unsigned long)irq_handle | 0x80000000); + } + + if (irq_handle == NULL) + return -ENOMEM; + + irq_handle->handler = handler; + irq_handle->flags = flags; + irq_handle->count = 0; + irq_handle->dev_id = dev_id; + irq_handle->devname = devname; + irq_list[irq] = irq_handle; + + if (irq_handle->flags & SA_SAMPLE_RANDOM) + rand_initialize_irq(irq); + + enable_irq(irq); + return 0; +} + +EXPORT_SYMBOL(request_irq); + +void free_irq(unsigned int irq, void *dev_id) +{ + if (irq >= NR_IRQS) + return; + + if (!irq_list[irq] || irq_list[irq]->dev_id != dev_id) + printk(KERN_WARNING "Removing probably wrong IRQ %d from %s\n", + irq, irq_list[irq]->devname); + disable_irq(irq); + h8300_disable_irq_pin(irq); + if (((unsigned long)irq_list[irq] & 0x80000000) == 0) { + kfree(irq_list[irq]); + irq_list[irq] = NULL; + } +} + +EXPORT_SYMBOL(free_irq); + +/* + * Do we need these probe functions on the m68k? + */ +unsigned long probe_irq_on (void) +{ + return 0; +} + +EXPORT_SYMBOL(probe_irq_on); + +int probe_irq_off (unsigned long irqs) +{ + return 0; +} + +EXPORT_SYMBOL(probe_irq_off); + +void enable_irq(unsigned int irq) +{ + if (irq >= EXT_IRQ0 && irq <= (EXT_IRQ0 + EXT_IRQS)) + IER_REGS |= 1 << (irq - EXT_IRQ0); +} + +void disable_irq(unsigned int irq) +{ + if (irq >= EXT_IRQ0 && irq <= (EXT_IRQ0 + EXT_IRQS)) + IER_REGS &= ~(1 << (irq - EXT_IRQ0)); +} + +asmlinkage void process_int(int irq, struct pt_regs *fp) +{ + irq_enter(); + h8300_clear_isr(irq); + if (irq >= NR_TRAPS && irq < NR_IRQS) { + if (irq_list[irq]) { + irq_list[irq]->handler(irq, irq_list[irq]->dev_id, fp); + irq_list[irq]->count++; + if (irq_list[irq]->flags & SA_SAMPLE_RANDOM) + add_interrupt_randomness(irq); + } + } else { + BUG(); + } + irq_exit(); +} + +int show_interrupts(struct seq_file *p, void *v) +{ + int i = *(loff_t *) v; + + if ((i < NR_IRQS) && (irq_list[i]!=NULL)) { + seq_printf(p, "%3d: %10u ",i,irq_list[i]->count); + seq_printf(p, "%s\n", irq_list[i]->devname); + } + + return 0; +} + +void init_irq_proc(void) +{ +} + +static int __init enable_kmalloc(void) +{ + use_kmalloc = 1; + return 0; +} +core_initcall(enable_kmalloc); diff --git a/arch/h8300/kernel/module.c b/arch/h8300/kernel/module.c new file mode 100644 index 00000000000..4fd7138a6e0 --- /dev/null +++ b/arch/h8300/kernel/module.c @@ -0,0 +1,122 @@ +#include <linux/moduleloader.h> +#include <linux/elf.h> +#include <linux/vmalloc.h> +#include <linux/fs.h> +#include <linux/string.h> +#include <linux/kernel.h> + +#if 0 +#define DEBUGP printk +#else +#define DEBUGP(fmt...) +#endif + +void *module_alloc(unsigned long size) +{ + if (size == 0) + return NULL; + return vmalloc(size); +} + + +/* Free memory returned from module_alloc */ +void module_free(struct module *mod, void *module_region) +{ + vfree(module_region); + /* FIXME: If module_region == mod->init_region, trim exception + table entries. */ +} + +/* We don't need anything special. */ +int module_frob_arch_sections(Elf_Ehdr *hdr, + Elf_Shdr *sechdrs, + char *secstrings, + struct module *mod) +{ + return 0; +} + +int apply_relocate(Elf32_Shdr *sechdrs, + const char *strtab, + unsigned int symindex, + unsigned int relsec, + struct module *me) +{ + printk(KERN_ERR "module %s: RELOCATION unsupported\n", + me->name); + return -ENOEXEC; +} + +int apply_relocate_add(Elf32_Shdr *sechdrs, + const char *strtab, + unsigned int symindex, + unsigned int relsec, + struct module *me) +{ + unsigned int i; + Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr; + + DEBUGP("Applying relocate section %u to %u\n", relsec, + sechdrs[relsec].sh_info); + for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) { + /* This is where to make the change */ + uint32_t *loc = (uint32_t *)(sechdrs[sechdrs[relsec].sh_info].sh_addr + + rela[i].r_offset); + /* This is the symbol it is referring to. Note that all + undefined symbols have been resolved. */ + Elf32_Sym *sym = (Elf32_Sym *)sechdrs[symindex].sh_addr + + ELF32_R_SYM(rela[i].r_info); + uint32_t v = sym->st_value + rela[i].r_addend; + + switch (ELF32_R_TYPE(rela[i].r_info)) { + case R_H8_DIR24R8: + loc = (uint32_t *)((uint32_t)loc - 1); + *loc = (*loc & 0xff000000) | ((*loc & 0xffffff) + v); + break; + case R_H8_DIR24A8: + if (ELF32_R_SYM(rela[i].r_info)) + *loc += v; + break; + case R_H8_DIR32: + case R_H8_DIR32A16: + *loc += v; + break; + case R_H8_PCREL16: + v -= (unsigned long)loc + 2; + if ((Elf32_Sword)v > 0x7fff || + (Elf32_Sword)v < -(Elf32_Sword)0x8000) + goto overflow; + else + *(unsigned short *)loc = v; + break; + case R_H8_PCREL8: + v -= (unsigned long)loc + 1; + if ((Elf32_Sword)v > 0x7f || + (Elf32_Sword)v < -(Elf32_Sword)0x80) + goto overflow; + else + *(unsigned char *)loc = v; + break; + default: + printk(KERN_ERR "module %s: Unknown relocation: %u\n", + me->name, ELF32_R_TYPE(rela[i].r_info)); + return -ENOEXEC; + } + } + return 0; + overflow: + printk(KERN_ERR "module %s: relocation offset overflow: %08x\n", + me->name, rela[i].r_offset); + return -ENOEXEC; +} + +int module_finalize(const Elf_Ehdr *hdr, + const Elf_Shdr *sechdrs, + struct module *me) +{ + return 0; +} + +void module_arch_cleanup(struct module *mod) +{ +} diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c new file mode 100644 index 00000000000..134aec1c6d1 --- /dev/null +++ b/arch/h8300/kernel/process.c @@ -0,0 +1,288 @@ +/* + * linux/arch/h8300/kernel/process.c + * + * Yoshinori Sato <ysato@users.sourceforge.jp> + * + * Based on: + * + * linux/arch/m68knommu/kernel/process.c + * + * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>, + * Kenneth Albanowski <kjahds@kjahds.com>, + * The Silver Hammer Group, Ltd. + * + * linux/arch/m68k/kernel/process.c + * + * Copyright (C) 1995 Hamish Macdonald + * + * 68060 fixes by Jesper Skov + */ + +/* + * This file handles the architecture-dependent parts of process handling.. + */ + +#include <linux/config.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/stddef.h> +#include <linux/unistd.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/user.h> +#include <linux/a.out.h> +#include <linux/interrupt.h> +#include <linux/reboot.h> + +#include <asm/uaccess.h> +#include <asm/system.h> +#include <asm/traps.h> +#include <asm/setup.h> +#include <asm/pgtable.h> + +asmlinkage void ret_from_fork(void); + +/* + * The idle loop on an H8/300.. + */ +#if !defined(CONFIG_H8300H_SIM) && !defined(CONFIG_H8S_SIM) +void default_idle(void) +{ + while(1) { + if (need_resched()) { + local_irq_enable(); + __asm__("sleep"); + local_irq_disable(); + } + schedule(); + } +} +#else +void default_idle(void) +{ + while(1) { + if (need_resched()) + schedule(); + } +} +#endif +void (*idle)(void) = default_idle; + +/* + * The idle thread. There's no useful work to be + * done, so just try to conserve power and have a + * low exit latency (ie sit in a loop waiting for + * somebody to say that they'd like to reschedule) + */ +void cpu_idle(void) +{ + idle(); +} + +void machine_restart(char * __unused) +{ + local_irq_disable(); + __asm__("jmp @@0"); +} + +EXPORT_SYMBOL(machine_restart); + +void machine_halt(void) +{ + local_irq_disable(); + __asm__("sleep"); + for (;;); +} + +EXPORT_SYMBOL(machine_halt); + +void machine_power_off(void) +{ + local_irq_disable(); + __asm__("sleep"); + for (;;); +} + +EXPORT_SYMBOL(machine_power_off); + +void show_regs(struct pt_regs * regs) +{ + printk("\nPC: %08lx Status: %02x", + regs->pc, regs->ccr); + printk("\nORIG_ER0: %08lx ER0: %08lx ER1: %08lx", + regs->orig_er0, regs->er0, regs->er1); + printk("\nER2: %08lx ER3: %08lx ER4: %08lx ER5: %08lx", + regs->er2, regs->er3, regs->er4, regs->er5); + printk("\nER6' %08lx ",regs->er6); + if (user_mode(regs)) + printk("USP: %08lx\n", rdusp()); + else + printk("\n"); +} + +/* + * Create a kernel thread + */ +int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) +{ + long retval; + long clone_arg; + mm_segment_t fs; + + fs = get_fs(); + set_fs (KERNEL_DS); + clone_arg = flags | CLONE_VM; + __asm__("mov.l sp,er3\n\t" + "sub.l er2,er2\n\t" + "mov.l %2,er1\n\t" + "mov.l %1,er0\n\t" + "trapa #0\n\t" + "cmp.l sp,er3\n\t" + "beq 1f\n\t" + "mov.l %4,er0\n\t" + "mov.l %3,er1\n\t" + "jsr @er1\n\t" + "mov.l %5,er0\n\t" + "trapa #0\n" + "1:\n\t" + "mov.l er0,%0" + :"=r"(retval) + :"i"(__NR_clone),"g"(clone_arg),"g"(fn),"g"(arg),"i"(__NR_exit) + :"er0","er1","er2","er3"); + set_fs (fs); + return retval; +} + +void flush_thread(void) +{ +} + +/* + * "h8300_fork()".. By the time we get here, the + * non-volatile registers have also been saved on the + * stack. We do some ugly pointer stuff here.. (see + * also copy_thread) + */ + +asmlinkage int h8300_fork(struct pt_regs *regs) +{ + return -EINVAL; +} + +asmlinkage int h8300_vfork(struct pt_regs *regs) +{ + return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, rdusp(), regs, 0, NULL, NULL); +} + +asmlinkage int h8300_clone(struct pt_regs *regs) +{ + unsigned long clone_flags; + unsigned long newsp; + + /* syscall2 puts clone_flags in er1 and usp in er2 */ + clone_flags = regs->er1; + newsp = regs->er2; + if (!newsp) + newsp = rdusp(); + return do_fork(clone_flags, newsp, regs, 0, NULL, NULL); + +} + +int copy_thread(int nr, unsigned long clone_flags, + unsigned long usp, unsigned long topstk, + struct task_struct * p, struct pt_regs * regs) +{ + struct pt_regs * childregs; + + childregs = ((struct pt_regs *) (THREAD_SIZE + (unsigned long) p->thread_info)) - 1; + + *childregs = *regs; + childregs->retpc = (unsigned long) ret_from_fork; + childregs->er0 = 0; + + p->thread.usp = usp; + p->thread.ksp = (unsigned long)childregs; + + return 0; +} + +/* + * fill in the user structure for a core dump.. + */ +void dump_thread(struct pt_regs * regs, struct user * dump) +{ +/* changed the size calculations - should hopefully work better. lbt */ + dump->magic = CMAGIC; + dump->start_code = 0; + dump->start_stack = rdusp() & ~(PAGE_SIZE - 1); + dump->u_tsize = ((unsigned long) current->mm->end_code) >> PAGE_SHIFT; + dump->u_dsize = ((unsigned long) (current->mm->brk + + (PAGE_SIZE-1))) >> PAGE_SHIFT; + dump->u_dsize -= dump->u_tsize; + dump->u_ssize = 0; + + dump->u_ar0 = (struct user_regs_struct *)(((int)(&dump->regs)) -((int)(dump))); + dump->regs.er0 = regs->er0; + dump->regs.er1 = regs->er1; + dump->regs.er2 = regs->er2; + dump->regs.er3 = regs->er3; + dump->regs.er4 = regs->er4; + dump->regs.er5 = regs->er5; + dump->regs.er6 = regs->er6; + dump->regs.orig_er0 = regs->orig_er0; + dump->regs.ccr = regs->ccr; + dump->regs.pc = regs->pc; +} + +/* + * sys_execve() executes a new program. + */ +asmlinkage int sys_execve(char *name, char **argv, char **envp,int dummy,...) +{ + int error; + char * filename; + struct pt_regs *regs = (struct pt_regs *) ((unsigned char *)&dummy-4); + + lock_kernel(); + filename = getname(name); + error = PTR_ERR(filename); + if (IS_ERR(filename)) + goto out; + error = do_execve(filename, argv, envp, regs); + putname(filename); +out: + unlock_kernel(); + return error; +} + +unsigned long thread_saved_pc(struct task_struct *tsk) +{ + return ((struct pt_regs *)tsk->thread.esp0)->pc; +} + +unsigned long get_wchan(struct task_struct *p) +{ + unsigned long fp, pc; + unsigned long stack_page; + int count = 0; + if (!p || p == current || p->state == TASK_RUNNING) + return 0; + + stack_page = (unsigned long)p; + fp = ((struct pt_regs *)p->thread.ksp)->er6; + do { + if (fp < stack_page+sizeof(struct thread_info) || + fp >= 8184+stack_page) + return 0; + pc = ((unsigned long *)fp)[1]; + if (!in_sched_functions(pc)) + return pc; + fp = *(unsigned long *) fp; + } while (count++ < 16); + return 0; +} diff --git a/arch/h8300/kernel/ptrace.c b/arch/h8300/kernel/ptrace.c new file mode 100644 index 00000000000..5f19d774a28 --- /dev/null +++ b/arch/h8300/kernel/ptrace.c @@ -0,0 +1,277 @@ +/* + * linux/arch/h8300/kernel/ptrace.c + * + * Yoshinori Sato <ysato@users.sourceforge.jp> + * + * Based on: + * linux/arch/m68k/kernel/ptrace.c + * + * Copyright (C) 1994 by Hamish Macdonald + * Taken from linux/kernel/ptrace.c and modified for M680x0. + * linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of + * this archive for more details. + */ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/errno.h> +#include <linux/ptrace.h> +#include <linux/user.h> +#include <linux/config.h> + +#include <asm/uaccess.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/system.h> +#include <asm/processor.h> +#include <asm/signal.h> + +/* cpu depend functions */ +extern long h8300_get_reg(struct task_struct *task, int regno); +extern int h8300_put_reg(struct task_struct *task, int regno, unsigned long data); +extern void h8300_disable_trace(struct task_struct *child); +extern void h8300_enable_trace(struct task_struct *child); + +/* + * does not yet catch signals sent when the child dies. + * in exit.c or in signal.c. + */ + +inline +static int read_long(struct task_struct * tsk, unsigned long addr, + unsigned long * result) +{ + *result = *(unsigned long *)addr; + return 0; +} + +void ptrace_disable(struct task_struct *child) +{ + h8300_disable_trace(child); +} + +asmlinkage int sys_ptrace(long request, long pid, long addr, long data) +{ + struct task_struct *child; + int ret; + + lock_kernel(); + ret = -EPERM; + if (request == PTRACE_TRACEME) { + /* are we already being traced? */ + if (current->ptrace & PT_PTRACED) + goto out; + /* set the ptrace bit in the process flags. */ + current->ptrace |= PT_PTRACED; + ret = 0; + goto out; + } + ret = -ESRCH; + read_lock(&tasklist_lock); + child = find_task_by_pid(pid); + if (child) + get_task_struct(child); + read_unlock(&tasklist_lock); + if (!child) + goto out; + + ret = -EPERM; + if (pid == 1) /* you may not mess with init */ + goto out_tsk; + + if (request == PTRACE_ATTACH) { + ret = ptrace_attach(child); + goto out_tsk; + } + ret = ptrace_check_attach(child, request == PTRACE_KILL); + if (ret < 0) + goto out_tsk; + + switch (request) { + case PTRACE_PEEKTEXT: /* read word at location addr. */ + case PTRACE_PEEKDATA: { + unsigned long tmp; + + ret = read_long(child, addr, &tmp); + if (ret < 0) + break ; + ret = put_user(tmp, (unsigned long *) data); + break ; + } + + /* read the word at location addr in the USER area. */ + case PTRACE_PEEKUSR: { + unsigned long tmp = 0; + + if ((addr & 3) || addr < 0 || addr >= sizeof(struct user)) { + ret = -EIO; + break ; + } + + ret = 0; /* Default return condition */ + addr = addr >> 2; /* temporary hack. */ + + if (addr < H8300_REGS_NO) + tmp = h8300_get_reg(child, addr); + else { + switch(addr) { + case 49: + tmp = child->mm->start_code; + break ; + case 50: + tmp = child->mm->start_data; + break ; + case 51: + tmp = child->mm->end_code; + break ; + case 52: + tmp = child->mm->end_data; + break ; + default: + ret = -EIO; + } + } + if (!ret) + ret = put_user(tmp,(unsigned long *) data); + break ; + } + + /* when I and D space are separate, this will have to be fixed. */ + case PTRACE_POKETEXT: /* write the word at location addr. */ + case PTRACE_POKEDATA: + ret = 0; + if (access_process_vm(child, addr, &data, sizeof(data), 1) == sizeof(data)) + break; + ret = -EIO; + break; + + case PTRACE_POKEUSR: /* write the word at location addr in the USER area */ + if ((addr & 3) || addr < 0 || addr >= sizeof(struct user)) { + ret = -EIO; + break ; + } + addr = addr >> 2; /* temporary hack. */ + + if (addr == PT_ORIG_ER0) { + ret = -EIO; + break ; + } + if (addr < H8300_REGS_NO) { + ret = h8300_put_reg(child, addr, data); + break ; + } + ret = -EIO; + break ; + case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */ + case PTRACE_CONT: { /* restart after signal. */ + ret = -EIO; + if ((unsigned long) data >= _NSIG) + break ; + if (request == PTRACE_SYSCALL) + set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + else + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + child->exit_code = data; + wake_up_process(child); + /* make sure the single step bit is not set. */ + h8300_disable_trace(child); + ret = 0; + } + +/* + * make the child exit. Best I can do is send it a sigkill. + * perhaps it should be put in the status that it wants to + * exit. + */ + case PTRACE_KILL: { + + ret = 0; + if (child->exit_state == EXIT_ZOMBIE) /* already dead */ + break; + child->exit_code = SIGKILL; + h8300_disable_trace(child); + wake_up_process(child); + break; + } + + case PTRACE_SINGLESTEP: { /* set the trap flag. */ + ret = -EIO; + if ((unsigned long) data > _NSIG) + break; + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + child->exit_code = data; + h8300_enable_trace(child); + wake_up_process(child); + ret = 0; + break; + } + + case PTRACE_DETACH: /* detach a process that was attached. */ + ret = ptrace_detach(child, data); + break; + + case PTRACE_GETREGS: { /* Get all gp regs from the child. */ + int i; + unsigned long tmp; + for (i = 0; i < H8300_REGS_NO; i++) { + tmp = h8300_get_reg(child, i); + if (put_user(tmp, (unsigned long *) data)) { + ret = -EFAULT; + break; + } + data += sizeof(long); + } + ret = 0; + break; + } + + case PTRACE_SETREGS: { /* Set all gp regs in the child. */ + int i; + unsigned long tmp; + for (i = 0; i < H8300_REGS_NO; i++) { + if (get_user(tmp, (unsigned long *) data)) { + ret = -EFAULT; + break; + } + h8300_put_reg(child, i, tmp); + data += sizeof(long); + } + ret = 0; + break; + } + + default: + ret = -EIO; + break; + } +out_tsk: + put_task_struct(child); +out: + unlock_kernel(); + return ret; +} + +asmlinkage void syscall_trace(void) +{ + if (!test_thread_flag(TIF_SYSCALL_TRACE)) + return; + if (!(current->ptrace & PT_PTRACED)) + return; + ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) + ? 0x80 : 0)); + /* + * this isn't the same as continuing with a signal, but it will do + * for normal use. strace only continues with a signal if the + * stopping signal is not SIGTRAP. -brl + */ + if (current->exit_code) { + send_sig(current->exit_code, current, 1); + current->exit_code = 0; + } +} diff --git a/arch/h8300/kernel/semaphore.c b/arch/h8300/kernel/semaphore.c new file mode 100644 index 00000000000..1ebb79baaa8 --- /dev/null +++ b/arch/h8300/kernel/semaphore.c @@ -0,0 +1,133 @@ +/* + * Generic semaphore code. Buyer beware. Do your own + * specific changes in <asm/semaphore-helper.h> + */ + +#include <linux/config.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <asm/semaphore-helper.h> + +#ifndef CONFIG_RMW_INSNS +spinlock_t semaphore_wake_lock; +#endif + +/* + * Semaphores are implemented using a two-way counter: + * The "count" variable is decremented for each process + * that tries to sleep, while the "waking" variable is + * incremented when the "up()" code goes to wake up waiting + * processes. + * + * Notably, the inline "up()" and "down()" functions can + * efficiently test if they need to do any extra work (up + * needs to do something only if count was negative before + * the increment operation. + * + * waking_non_zero() (from asm/semaphore.h) must execute + * atomically. + * + * When __up() is called, the count was negative before + * incrementing it, and we need to wake up somebody. + * + * This routine adds one to the count of processes that need to + * wake up and exit. ALL waiting processes actually wake up but + * only the one that gets to the "waking" field first will gate + * through and acquire the semaphore. The others will go back + * to sleep. + * + * Note that these functions are only called when there is + * contention on the lock, and as such all this is the + * "non-critical" part of the whole semaphore business. The + * critical part is the inline stuff in <asm/semaphore.h> + * where we want to avoid any extra jumps and calls. + */ +void __up(struct semaphore *sem) +{ + wake_one_more(sem); + wake_up(&sem->wait); +} + +/* + * Perform the "down" function. Return zero for semaphore acquired, + * return negative for signalled out of the function. + * + * If called from __down, the return is ignored and the wait loop is + * not interruptible. This means that a task waiting on a semaphore + * using "down()" cannot be killed until someone does an "up()" on + * the semaphore. + * + * If called from __down_interruptible, the return value gets checked + * upon return. If the return value is negative then the task continues + * with the negative value in the return register (it can be tested by + * the caller). + * + * Either form may be used in conjunction with "up()". + * + */ + + +#define DOWN_HEAD(task_state) \ + \ + \ + current->state = (task_state); \ + add_wait_queue(&sem->wait, &wait); \ + \ + /* \ + * Ok, we're set up. sem->count is known to be less than zero \ + * so we must wait. \ + * \ + * We can let go the lock for purposes of waiting. \ + * We re-acquire it after awaking so as to protect \ + * all semaphore operations. \ + * \ + * If "up()" is called before we call waking_non_zero() then \ + * we will catch it right away. If it is called later then \ + * we will have to go through a wakeup cycle to catch it. \ + * \ + * Multiple waiters contend for the semaphore lock to see \ + * who gets to gate through and who has to wait some more. \ + */ \ + for (;;) { + +#define DOWN_TAIL(task_state) \ + current->state = (task_state); \ + } \ + current->state = TASK_RUNNING; \ + remove_wait_queue(&sem->wait, &wait); + +void __sched __down(struct semaphore * sem) +{ + DECLARE_WAITQUEUE(wait, current); + + DOWN_HEAD(TASK_UNINTERRUPTIBLE) + if (waking_non_zero(sem)) + break; + schedule(); + DOWN_TAIL(TASK_UNINTERRUPTIBLE) +} + +int __sched __down_interruptible(struct semaphore * sem) +{ + DECLARE_WAITQUEUE(wait, current); + int ret = 0; + + DOWN_HEAD(TASK_INTERRUPTIBLE) + + ret = waking_non_zero_interruptible(sem, current); + if (ret) + { + if (ret == 1) + /* ret != 0 only if we get interrupted -arca */ + ret = 0; + break; + } + schedule(); + DOWN_TAIL(TASK_INTERRUPTIBLE) + return ret; +} + +int __down_trylock(struct semaphore * sem) +{ + return waking_non_zero_trylock(sem); +} diff --git a/arch/h8300/kernel/setup.c b/arch/h8300/kernel/setup.c new file mode 100644 index 00000000000..f469d916073 --- /dev/null +++ b/arch/h8300/kernel/setup.c @@ -0,0 +1,248 @@ +/* + * linux/arch/h8300/kernel/setup.c + * + * Copyleft ()) 2000 James D. Schettine {james@telos-systems.com} + * Copyright (C) 1999,2000 Greg Ungerer (gerg@snapgear.com) + * Copyright (C) 1998,1999 D. Jeff Dionne <jeff@lineo.ca> + * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> + * Copyright (C) 1995 Hamish Macdonald + * Copyright (C) 2000 Lineo Inc. (www.lineo.com) + * Copyright (C) 2001 Lineo, Inc. <www.lineo.com> + * + * H8/300 porting Yoshinori Sato <ysato@users.sourceforge.jp> + */ + +/* + * This file handles the architecture-dependent parts of system setup + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/fs.h> +#include <linux/fb.h> +#include <linux/console.h> +#include <linux/genhd.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/major.h> +#include <linux/bootmem.h> +#include <linux/seq_file.h> +#include <linux/init.h> + +#include <asm/setup.h> +#include <asm/irq.h> + +#ifdef CONFIG_BLK_DEV_INITRD +#include <asm/pgtable.h> +#endif + +#if defined(__H8300H__) +#define CPU "H8/300H" +#include <asm/regs306x.h> +#endif + +#if defined(__H8300S__) +#define CPU "H8S" +#include <asm/regs267x.h> +#endif + +#define STUBSIZE 0xc000; + +unsigned long rom_length; +unsigned long memory_start; +unsigned long memory_end; + +char command_line[COMMAND_LINE_SIZE]; + +extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end; +extern int _ramstart, _ramend; +extern char _target_name[]; +extern void h8300_gpio_init(void); + +#if (defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)) \ + && defined(CONFIG_GDB_MAGICPRINT) +/* printk with gdb service */ +static void gdb_console_output(struct console *c, const char *msg, unsigned len) +{ + for (; len > 0; len--) { + asm("mov.w %0,r2\n\t" + "jsr @0xc4"::"r"(*msg++):"er2"); + } +} + +/* + * Setup initial baud/bits/parity. We do two things here: + * - construct a cflag setting for the first rs_open() + * - initialize the serial port + * Return non-zero if we didn't find a serial port. + */ +static int __init gdb_console_setup(struct console *co, char *options) +{ + return 0; +} + +static const struct console gdb_console = { + .name = "gdb_con", + .write = gdb_console_output, + .device = NULL, + .setup = gdb_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, +}; +#endif + +void __init setup_arch(char **cmdline_p) +{ + int bootmap_size; + + memory_start = (unsigned long) &_ramstart; + + /* allow for ROMFS on the end of the kernel */ + if (memcmp((void *)memory_start, "-rom1fs-", 8) == 0) { +#if defined(CONFIG_BLK_DEV_INITRD) + initrd_start = memory_start; + initrd_end = memory_start += be32_to_cpu(((unsigned long *) (memory_start))[2]); +#else + memory_start += be32_to_cpu(((unsigned long *) memory_start)[2]); +#endif + } + memory_start = PAGE_ALIGN(memory_start); +#if !defined(CONFIG_BLKDEV_RESERVE) + memory_end = (unsigned long) &_ramend; /* by now the stack is part of the init task */ +#if defined(CONFIG_GDB_DEBUG) + memory_end -= STUBSIZE; +#endif +#else + if ((memory_end < CONFIG_BLKDEV_RESERVE_ADDRESS) && + (memory_end > CONFIG_BLKDEV_RESERVE_ADDRESS) + /* overlap userarea */ + memory_end = CONFIG_BLKDEV_RESERVE_ADDRESS; +#endif + + init_mm.start_code = (unsigned long) &_stext; + init_mm.end_code = (unsigned long) &_etext; + init_mm.end_data = (unsigned long) &_edata; + init_mm.brk = (unsigned long) 0; + +#if (defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)) && defined(CONFIG_GDB_MAGICPRINT) + register_console((struct console *)&gdb_console); +#endif + + printk(KERN_INFO "\r\n\nuClinux " CPU "\n"); + printk(KERN_INFO "Target Hardware: %s\n",_target_name); + printk(KERN_INFO "Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne\n"); + printk(KERN_INFO "H8/300 series support by Yoshinori Sato <ysato@users.sourceforge.jp>\n"); + +#ifdef DEBUG + printk(KERN_DEBUG "KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x " + "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext, + (int) &_sdata, (int) &_edata, + (int) &_sbss, (int) &_ebss); + printk(KERN_DEBUG "KERNEL -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x " + "STACK=0x%06x-0x%06x\n", + (int) &_ebss, (int) memory_start, + (int) memory_start, (int) memory_end, + (int) memory_end, (int) &_ramend); +#endif + +#ifdef CONFIG_DEFAULT_CMDLINE + /* set from default command line */ + if (*command_line == '\0') + strcpy(command_line,CONFIG_KERNEL_COMMAND); +#endif + /* Keep a copy of command line */ + *cmdline_p = &command_line[0]; + memcpy(saved_command_line, command_line, COMMAND_LINE_SIZE); + saved_command_line[COMMAND_LINE_SIZE-1] = 0; + +#ifdef DEBUG + if (strlen(*cmdline_p)) + printk(KERN_DEBUG "Command line: '%s'\n", *cmdline_p); +#endif + + /* + * give all the memory to the bootmap allocator, tell it to put the + * boot mem_map at the start of memory + */ + bootmap_size = init_bootmem_node( + NODE_DATA(0), + memory_start >> PAGE_SHIFT, /* map goes here */ + PAGE_OFFSET >> PAGE_SHIFT, /* 0 on coldfire */ + memory_end >> PAGE_SHIFT); + /* + * free the usable memory, we have to make sure we do not free + * the bootmem bitmap so we then reserve it after freeing it :-) + */ + free_bootmem(memory_start, memory_end - memory_start); + reserve_bootmem(memory_start, bootmap_size); + /* + * get kmalloc into gear + */ + paging_init(); + h8300_gpio_init(); +#if defined(CONFIG_H8300_AKI3068NET) && defined(CONFIG_IDE) + { +#define AREABIT(addr) (1 << (((addr) >> 21) & 7)) + /* setup BSC */ + volatile unsigned char *abwcr = (volatile unsigned char *)ABWCR; + volatile unsigned char *cscr = (volatile unsigned char *)CSCR; + *abwcr &= ~(AREABIT(CONFIG_H8300_IDE_BASE) | AREABIT(CONFIG_H8300_IDE_ALT)); + *cscr |= (AREABIT(CONFIG_H8300_IDE_BASE) | AREABIT(CONFIG_H8300_IDE_ALT)) | 0x0f; + } +#endif +#ifdef DEBUG + printk(KERN_DEBUG "Done setup_arch\n"); +#endif +} + +/* + * Get CPU information for use by the procfs. + */ + +static int show_cpuinfo(struct seq_file *m, void *v) +{ + char *cpu; + int mode; + u_long clockfreq; + + cpu = CPU; + mode = *(volatile unsigned char *)MDCR & 0x07; + + clockfreq = CONFIG_CPU_CLOCK; + + seq_printf(m, "CPU:\t\t%s (mode:%d)\n" + "Clock:\t\t%lu.%1luMHz\n" + "BogoMips:\t%lu.%02lu\n" + "Calibration:\t%lu loops\n", + cpu,mode, + clockfreq/1000,clockfreq%1000, + (loops_per_jiffy*HZ)/500000,((loops_per_jiffy*HZ)/5000)%100, + (loops_per_jiffy*HZ)); + + return 0; +} + +static void *c_start(struct seq_file *m, loff_t *pos) +{ + return *pos < NR_CPUS ? ((void *) 0x12345678) : NULL; +} + +static void *c_next(struct seq_file *m, void *v, loff_t *pos) +{ + ++*pos; + return c_start(m, pos); +} + +static void c_stop(struct seq_file *m, void *v) +{ +} + +struct seq_operations cpuinfo_op = { + .start = c_start, + .next = c_next, + .stop = c_stop, + .show = show_cpuinfo, +}; diff --git a/arch/h8300/kernel/signal.c b/arch/h8300/kernel/signal.c new file mode 100644 index 00000000000..a4799d633ef --- /dev/null +++ b/arch/h8300/kernel/signal.c @@ -0,0 +1,552 @@ +/* + * linux/arch/h8300/kernel/signal.c + * + * Copyright (C) 1991, 1992 Linus Torvalds + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +/* + * uClinux H8/300 support by Yoshinori Sato <ysato@users.sourceforge.jp> + * and David McCullough <davidm@snapgear.com> + * + * Based on + * Linux/m68k by Hamish Macdonald + */ + +/* + * ++roman (07/09/96): implemented signal stacks (specially for tosemu on + * Atari :-) Current limitation: Only one sigstack can be active at one time. + * If a second signal with SA_ONSTACK set arrives while working on a sigstack, + * SA_ONSTACK is ignored. This behaviour avoids lots of trouble with nested + * signal handlers! + */ + +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/kernel.h> +#include <linux/signal.h> +#include <linux/syscalls.h> +#include <linux/errno.h> +#include <linux/wait.h> +#include <linux/ptrace.h> +#include <linux/unistd.h> +#include <linux/stddef.h> +#include <linux/highuid.h> +#include <linux/personality.h> +#include <linux/tty.h> +#include <linux/binfmts.h> +#include <linux/suspend.h> + +#include <asm/setup.h> +#include <asm/uaccess.h> +#include <asm/pgtable.h> +#include <asm/traps.h> +#include <asm/ucontext.h> + +#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) + +asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset); + +/* + * Atomically swap in the new signal mask, and wait for a signal. + */ +asmlinkage int do_sigsuspend(struct pt_regs *regs) +{ + old_sigset_t mask = regs->er3; + sigset_t saveset; + + mask &= _BLOCKABLE; + spin_lock_irq(¤t->sighand->siglock); + saveset = current->blocked; + siginitset(¤t->blocked, mask); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + regs->er0 = -EINTR; + while (1) { + current->state = TASK_INTERRUPTIBLE; + schedule(); + if (do_signal(regs, &saveset)) + return -EINTR; + } +} + +asmlinkage int +do_rt_sigsuspend(struct pt_regs *regs) +{ + sigset_t *unewset = (sigset_t *)regs->er1; + size_t sigsetsize = (size_t)regs->er2; + sigset_t saveset, newset; + + /* XXX: Don't preclude handling different sized sigset_t's. */ + if (sigsetsize != sizeof(sigset_t)) + return -EINVAL; + + if (copy_from_user(&newset, unewset, sizeof(newset))) + return -EFAULT; + sigdelsetmask(&newset, ~_BLOCKABLE); + + spin_lock_irq(¤t->sighand->siglock); + saveset = current->blocked; + current->blocked = newset; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + regs->er0 = -EINTR; + while (1) { + current->state = TASK_INTERRUPTIBLE; + schedule(); + if (do_signal(regs, &saveset)) + return -EINTR; + } +} + +asmlinkage int +sys_sigaction(int sig, const struct old_sigaction *act, + struct old_sigaction *oact) +{ + struct k_sigaction new_ka, old_ka; + int ret; + + if (act) { + old_sigset_t mask; + if (!access_ok(VERIFY_READ, act, sizeof(*act)) || + __get_user(new_ka.sa.sa_handler, &act->sa_handler) || + __get_user(new_ka.sa.sa_restorer, &act->sa_restorer)) + return -EFAULT; + __get_user(new_ka.sa.sa_flags, &act->sa_flags); + __get_user(mask, &act->sa_mask); + siginitset(&new_ka.sa.sa_mask, mask); + } + + ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); + + if (!ret && oact) { + if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) || + __put_user(old_ka.sa.sa_handler, &oact->sa_handler) || + __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer)) + return -EFAULT; + __put_user(old_ka.sa.sa_flags, &oact->sa_flags); + __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask); + } + + return ret; +} + +asmlinkage int +sys_sigaltstack(const stack_t *uss, stack_t *uoss) +{ + return do_sigaltstack(uss, uoss, rdusp()); +} + + +/* + * Do a signal return; undo the signal stack. + * + * Keep the return code on the stack quadword aligned! + * That makes the cache flush below easier. + */ + +struct sigframe +{ + long dummy_er0; + long dummy_vector; +#if defined(CONFIG_CPU_H8S) + short dummy_exr; +#endif + long dummy_pc; + char *pretcode; + unsigned char retcode[8]; + unsigned long extramask[_NSIG_WORDS-1]; + struct sigcontext sc; + int sig; +} __attribute__((aligned(2),packed)); + +struct rt_sigframe +{ + long dummy_er0; + long dummy_vector; +#if defined(CONFIG_CPU_H8S) + short dummy_exr; +#endif + long dummy_pc; + char *pretcode; + struct siginfo *pinfo; + void *puc; + unsigned char retcode[8]; + struct siginfo info; + struct ucontext uc; + int sig; +} __attribute__((aligned(2),packed)); + +static inline int +restore_sigcontext(struct pt_regs *regs, struct sigcontext *usc, + int *pd0) +{ + int err = 0; + unsigned int ccr; + unsigned int usp; + unsigned int er0; + + /* Always make any pending restarted system calls return -EINTR */ + current_thread_info()->restart_block.fn = do_no_restart_syscall; + +#define COPY(r) err |= __get_user(regs->r, &usc->sc_##r) /* restore passed registers */ + COPY(er1); + COPY(er2); + COPY(er3); + COPY(er5); + COPY(pc); + ccr = regs->ccr & 0x10; + COPY(ccr); +#undef COPY + regs->ccr &= 0xef; + regs->ccr |= ccr; + regs->orig_er0 = -1; /* disable syscall checks */ + err |= __get_user(usp, &usc->sc_usp); + wrusp(usp); + + err |= __get_user(er0, &usc->sc_er0); + *pd0 = er0; + return err; +} + +asmlinkage int do_sigreturn(unsigned long __unused,...) +{ + struct pt_regs *regs = (struct pt_regs *) (&__unused - 1); + unsigned long usp = rdusp(); + struct sigframe *frame = (struct sigframe *)(usp - 4); + sigset_t set; + int er0; + + if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) + goto badframe; + if (__get_user(set.sig[0], &frame->sc.sc_mask) || + (_NSIG_WORDS > 1 && + __copy_from_user(&set.sig[1], &frame->extramask, + sizeof(frame->extramask)))) + goto badframe; + + sigdelsetmask(&set, ~_BLOCKABLE); + spin_lock_irq(¤t->sighand->siglock); + current->blocked = set; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + if (restore_sigcontext(regs, &frame->sc, &er0)) + goto badframe; + return er0; + +badframe: + force_sig(SIGSEGV, current); + return 0; +} + +asmlinkage int do_rt_sigreturn(unsigned long __unused,...) +{ + struct pt_regs *regs = (struct pt_regs *) &__unused; + unsigned long usp = rdusp(); + struct rt_sigframe *frame = (struct rt_sigframe *)(usp - 4); + sigset_t set; + int er0; + + if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) + goto badframe; + if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) + goto badframe; + + sigdelsetmask(&set, ~_BLOCKABLE); + spin_unlock_irq(¤t->sighand->siglock); + current->blocked = set; + recalc_sigpending(); + spin_lock_irq(¤t->sighand->siglock); + + if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &er0)) + goto badframe; + + if (do_sigaltstack(&frame->uc.uc_stack, NULL, usp) == -EFAULT) + goto badframe; + + return er0; + +badframe: + force_sig(SIGSEGV, current); + return 0; +} + +static int setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, + unsigned long mask) +{ + int err = 0; + + err |= __put_user(regs->er0, &sc->sc_er0); + err |= __put_user(regs->er1, &sc->sc_er1); + err |= __put_user(regs->er2, &sc->sc_er2); + err |= __put_user(regs->er3, &sc->sc_er3); + err |= __put_user(regs->er4, &sc->sc_er4); + err |= __put_user(regs->er5, &sc->sc_er5); + err |= __put_user(regs->er6, &sc->sc_er6); + err |= __put_user(rdusp(), &sc->sc_usp); + err |= __put_user(regs->pc, &sc->sc_pc); + err |= __put_user(regs->ccr, &sc->sc_ccr); + err |= __put_user(mask, &sc->sc_mask); + + return err; +} + +static inline void * +get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size) +{ + unsigned long usp; + + /* Default to using normal stack. */ + usp = rdusp(); + + /* This is the X/Open sanctioned signal stack switching. */ + if (ka->sa.sa_flags & SA_ONSTACK) { + if (!on_sig_stack(usp)) + usp = current->sas_ss_sp + current->sas_ss_size; + } + return (void *)((usp - frame_size) & -8UL); +} + +static void setup_frame (int sig, struct k_sigaction *ka, + sigset_t *set, struct pt_regs *regs) +{ + struct sigframe *frame; + int err = 0; + int usig; + unsigned char *ret; + + frame = get_sigframe(ka, regs, sizeof(*frame)); + + if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) + goto give_sigsegv; + + usig = current_thread_info()->exec_domain + && current_thread_info()->exec_domain->signal_invmap + && sig < 32 + ? current_thread_info()->exec_domain->signal_invmap[sig] + : sig; + + err |= __put_user(usig, &frame->sig); + if (err) + goto give_sigsegv; + + err |= setup_sigcontext(&frame->sc, regs, set->sig[0]); + if (err) + goto give_sigsegv; + + if (_NSIG_WORDS > 1) { + err |= copy_to_user(frame->extramask, &set->sig[1], + sizeof(frame->extramask)); + if (err) + goto give_sigsegv; + } + + ret = frame->retcode; + if (ka->sa.sa_flags & SA_RESTORER) + ret = (unsigned char *)(ka->sa.sa_restorer); + else { + /* sub.l er0,er0; mov.b #__NR_sigreturn,r0l; trapa #0 */ + err != __put_user(0x1a80f800 + (__NR_sigreturn & 0xff), + (unsigned long *)(frame->retcode + 0)); + err |= __put_user(0x5700, (unsigned short *)(frame->retcode + 4)); + } + + /* Set up to return from userspace. */ + err |= __put_user(ret, &frame->pretcode); + + if (err) + goto give_sigsegv; + + /* Set up registers for signal handler */ + wrusp ((unsigned long) frame); + regs->pc = (unsigned long) ka->sa.sa_handler; + regs->er0 = (current_thread_info()->exec_domain + && current_thread_info()->exec_domain->signal_invmap + && sig < 32 + ? current_thread_info()->exec_domain->signal_invmap[sig] + : sig); + regs->er1 = (unsigned long)&(frame->sc); + regs->er5 = current->mm->start_data; /* GOT base */ + + return; + +give_sigsegv: + force_sigsegv(sig, current); +} + +static void setup_rt_frame (int sig, struct k_sigaction *ka, siginfo_t *info, + sigset_t *set, struct pt_regs *regs) +{ + struct rt_sigframe *frame; + int err = 0; + int usig; + unsigned char *ret; + + frame = get_sigframe(ka, regs, sizeof(*frame)); + + if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) + goto give_sigsegv; + + usig = current_thread_info()->exec_domain + && current_thread_info()->exec_domain->signal_invmap + && sig < 32 + ? current_thread_info()->exec_domain->signal_invmap[sig] + : sig; + + err |= __put_user(usig, &frame->sig); + if (err) + goto give_sigsegv; + + err |= __put_user(&frame->info, &frame->pinfo); + err |= __put_user(&frame->uc, &frame->puc); + err |= copy_siginfo_to_user(&frame->info, info); + if (err) + goto give_sigsegv; + + /* Create the ucontext. */ + err |= __put_user(0, &frame->uc.uc_flags); + err |= __put_user(0, &frame->uc.uc_link); + err |= __put_user((void *)current->sas_ss_sp, + &frame->uc.uc_stack.ss_sp); + err |= __put_user(sas_ss_flags(rdusp()), + &frame->uc.uc_stack.ss_flags); + err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); + err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0]); + err |= copy_to_user (&frame->uc.uc_sigmask, set, sizeof(*set)); + if (err) + goto give_sigsegv; + + /* Set up to return from userspace. */ + ret = frame->retcode; + if (ka->sa.sa_flags & SA_RESTORER) + ret = (unsigned char *)(ka->sa.sa_restorer); + else { + /* sub.l er0,er0; mov.b #__NR_sigreturn,r0l; trapa #0 */ + err != __put_user(0x1a80f800 + (__NR_sigreturn & 0xff), + (unsigned long *)(frame->retcode + 0)); + err |= __put_user(0x5700, (unsigned short *)(frame->retcode + 4)); + } + err |= __put_user(ret, &frame->pretcode); + + if (err) + goto give_sigsegv; + + /* Set up registers for signal handler */ + wrusp ((unsigned long) frame); + regs->pc = (unsigned long) ka->sa.sa_handler; + regs->er0 = (current_thread_info()->exec_domain + && current_thread_info()->exec_domain->signal_invmap + && sig < 32 + ? current_thread_info()->exec_domain->signal_invmap[sig] + : sig); + regs->er1 = (unsigned long)&(frame->info); + regs->er2 = (unsigned long)&frame->uc; + regs->er5 = current->mm->start_data; /* GOT base */ + + return; + +give_sigsegv: + force_sigsegv(sig, current); +} + +/* + * OK, we're invoking a handler + */ +static void +handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, + sigset_t *oldset, struct pt_regs * regs) +{ + /* are we from a system call? */ + if (regs->orig_er0 >= 0) { + switch (regs->er0) { + case -ERESTART_RESTARTBLOCK: + case -ERESTARTNOHAND: + regs->er0 = -EINTR; + break; + + case -ERESTARTSYS: + if (!(ka->sa.sa_flags & SA_RESTART)) { + regs->er0 = -EINTR; + break; + } + /* fallthrough */ + case -ERESTARTNOINTR: + regs->er0 = regs->orig_er0; + regs->pc -= 2; + } + } + + /* set up the stack frame */ + if (ka->sa.sa_flags & SA_SIGINFO) + setup_rt_frame(sig, ka, info, oldset, regs); + else + setup_frame(sig, ka, oldset, regs); + + if (!(ka->sa.sa_flags & SA_NODEFER)) { + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + sigaddset(¤t->blocked,sig); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + } +} + +/* + * Note that 'init' is a special process: it doesn't get signals it doesn't + * want to handle. Thus you cannot kill init even with a SIGKILL even by + * mistake. + */ +asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset) +{ + siginfo_t info; + int signr; + struct k_sigaction ka; + + /* + * We want the common case to go fast, which + * is why we may in certain cases get here from + * kernel mode. Just return without doing anything + * if so. + */ + if ((regs->ccr & 0x10)) + return 1; + + if (current->flags & PF_FREEZE) { + refrigerator(0); + goto no_signal; + } + + current->thread.esp0 = (unsigned long) regs; + + if (!oldset) + oldset = ¤t->blocked; + + signr = get_signal_to_deliver(&info, &ka, regs, NULL); + if (signr > 0) { + /* Whee! Actually deliver the signal. */ + handle_signal(signr, &info, &ka, oldset, regs); + return 1; + } + no_signal: + /* Did we come from a system call? */ + if (regs->orig_er0 >= 0) { + /* Restart the system call - no handlers present */ + if (regs->er0 == -ERESTARTNOHAND || + regs->er0 == -ERESTARTSYS || + regs->er0 == -ERESTARTNOINTR) { + regs->er0 = regs->orig_er0; + regs->pc -= 2; + } + if (regs->er0 == -ERESTART_RESTARTBLOCK){ + regs->er0 = __NR_restart_syscall; + regs->pc -= 2; + } + } + return 0; +} diff --git a/arch/h8300/kernel/sys_h8300.c b/arch/h8300/kernel/sys_h8300.c new file mode 100644 index 00000000000..0f61b7ad69a --- /dev/null +++ b/arch/h8300/kernel/sys_h8300.c @@ -0,0 +1,282 @@ +/* + * linux/arch/h8300/kernel/sys_h8300.c + * + * This file contains various random system calls that + * have a non-standard calling sequence on the H8/300 + * platform. + */ + +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/sem.h> +#include <linux/msg.h> +#include <linux/shm.h> +#include <linux/stat.h> +#include <linux/syscalls.h> +#include <linux/mman.h> +#include <linux/file.h> +#include <linux/utsname.h> + +#include <asm/setup.h> +#include <asm/uaccess.h> +#include <asm/cachectl.h> +#include <asm/traps.h> +#include <asm/ipc.h> + +/* + * sys_pipe() is the normal C calling standard for creating + * a pipe. It's not the way unix traditionally does this, though. + */ +asmlinkage int sys_pipe(unsigned long * fildes) +{ + int fd[2]; + int error; + + error = do_pipe(fd); + if (!error) { + if (copy_to_user(fildes, fd, 2*sizeof(int))) + error = -EFAULT; + } + return error; +} + +/* common code for old and new mmaps */ +static inline long do_mmap2( + unsigned long addr, unsigned long len, + unsigned long prot, unsigned long flags, + unsigned long fd, unsigned long pgoff) +{ + int error = -EBADF; + struct file * file = NULL; + + flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); + if (!(flags & MAP_ANONYMOUS)) { + file = fget(fd); + if (!file) + goto out; + } + + down_write(¤t->mm->mmap_sem); + error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); + up_write(¤t->mm->mmap_sem); + + if (file) + fput(file); +out: + return error; +} + +asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, + unsigned long prot, unsigned long flags, + unsigned long fd, unsigned long pgoff) +{ + return do_mmap2(addr, len, prot, flags, fd, pgoff); +} + +/* + * Perform the select(nd, in, out, ex, tv) and mmap() system + * calls. Linux/m68k cloned Linux/i386, which didn't use to be able to + * handle more than 4 system call parameters, so these system calls + * used a memory block for parameter passing.. + */ + +struct mmap_arg_struct { + unsigned long addr; + unsigned long len; + unsigned long prot; + unsigned long flags; + unsigned long fd; + unsigned long offset; +}; + +asmlinkage int old_mmap(struct mmap_arg_struct *arg) +{ + struct mmap_arg_struct a; + int error = -EFAULT; + + if (copy_from_user(&a, arg, sizeof(a))) + goto out; + + error = -EINVAL; + if (a.offset & ~PAGE_MASK) + goto out; + + a.flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); + + error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT); +out: + return error; +} + +#if 0 /* DAVIDM - do we want this */ +struct mmap_arg_struct64 { + __u32 addr; + __u32 len; + __u32 prot; + __u32 flags; + __u64 offset; /* 64 bits */ + __u32 fd; +}; + +asmlinkage long sys_mmap64(struct mmap_arg_struct64 *arg) +{ + int error = -EFAULT; + struct file * file = NULL; + struct mmap_arg_struct64 a; + unsigned long pgoff; + + if (copy_from_user(&a, arg, sizeof(a))) + return -EFAULT; + + if ((long)a.offset & ~PAGE_MASK) + return -EINVAL; + + pgoff = a.offset >> PAGE_SHIFT; + if ((a.offset >> PAGE_SHIFT) != pgoff) + return -EINVAL; + + if (!(a.flags & MAP_ANONYMOUS)) { + error = -EBADF; + file = fget(a.fd); + if (!file) + goto out; + } + a.flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); + + down_write(¤t->mm->mmap_sem); + error = do_mmap_pgoff(file, a.addr, a.len, a.prot, a.flags, pgoff); + up_write(¤t->mm->mmap_sem); + if (file) + fput(file); +out: + return error; +} +#endif + +struct sel_arg_struct { + unsigned long n; + fd_set *inp, *outp, *exp; + struct timeval *tvp; +}; + +asmlinkage int old_select(struct sel_arg_struct *arg) +{ + struct sel_arg_struct a; + + if (copy_from_user(&a, arg, sizeof(a))) + return -EFAULT; + /* sys_select() does the appropriate kernel locking */ + return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp); +} + +/* + * sys_ipc() is the de-multiplexer for the SysV IPC calls.. + * + * This is really horribly ugly. + */ +asmlinkage int sys_ipc (uint call, int first, int second, + int third, void *ptr, long fifth) +{ + int version, ret; + + version = call >> 16; /* hack for backward compatibility */ + call &= 0xffff; + + if (call <= SEMCTL) + switch (call) { + case SEMOP: + return sys_semop (first, (struct sembuf *)ptr, second); + case SEMGET: + return sys_semget (first, second, third); + case SEMCTL: { + union semun fourth; + if (!ptr) + return -EINVAL; + if (get_user(fourth.__pad, (void **) ptr)) + return -EFAULT; + return sys_semctl (first, second, third, fourth); + } + default: + return -EINVAL; + } + if (call <= MSGCTL) + switch (call) { + case MSGSND: + return sys_msgsnd (first, (struct msgbuf *) ptr, + second, third); + case MSGRCV: + switch (version) { + case 0: { + struct ipc_kludge tmp; + if (!ptr) + return -EINVAL; + if (copy_from_user (&tmp, + (struct ipc_kludge *)ptr, + sizeof (tmp))) + return -EFAULT; + return sys_msgrcv (first, tmp.msgp, second, + tmp.msgtyp, third); + } + default: + return sys_msgrcv (first, + (struct msgbuf *) ptr, + second, fifth, third); + } + case MSGGET: + return sys_msgget ((key_t) first, second); + case MSGCTL: + return sys_msgctl (first, second, + (struct msqid_ds *) ptr); + default: + return -EINVAL; + } + if (call <= SHMCTL) + switch (call) { + case SHMAT: + switch (version) { + default: { + ulong raddr; + ret = do_shmat (first, (char *) ptr, + second, &raddr); + if (ret) + return ret; + return put_user (raddr, (ulong *) third); + } + } + case SHMDT: + return sys_shmdt ((char *)ptr); + case SHMGET: + return sys_shmget (first, second, third); + case SHMCTL: + return sys_shmctl (first, second, + (struct shmid_ds *) ptr); + default: + return -EINVAL; + } + + return -EINVAL; +} + +/* sys_cacheflush -- no support. */ +asmlinkage int +sys_cacheflush (unsigned long addr, int scope, int cache, unsigned long len) +{ + return -EINVAL; +} + +asmlinkage int sys_getpagesize(void) +{ + return PAGE_SIZE; +} + +#if defined(CONFIG_SYSCALL_PRINT) +asmlinkage void syscall_print(void *dummy,...) +{ + struct pt_regs *regs = (struct pt_regs *) ((unsigned char *)&dummy-4); + printk("call %06lx:%ld 1:%08lx,2:%08lx,3:%08lx,ret:%08lx\n", + ((regs->pc)&0xffffff)-2,regs->orig_er0,regs->er1,regs->er2,regs->er3,regs->er0); +} +#endif diff --git a/arch/h8300/kernel/syscalls.S b/arch/h8300/kernel/syscalls.S new file mode 100644 index 00000000000..79b3bda5c6e --- /dev/null +++ b/arch/h8300/kernel/syscalls.S @@ -0,0 +1,340 @@ +/* Systemcall Entry Table */ +#include <linux/config.h> +#include <linux/sys.h> +#include <asm/linkage.h> +#include <asm/unistd.h> + +.globl SYMBOL_NAME(sys_call_table) + +#if defined(CONFIG_CPU_H8300H) + .h8300h +#endif +#if defined(CONFIG_CPU_H8S) + .h8300s +#endif + .section .text + .align 2 +SYMBOL_NAME_LABEL(sys_call_table) + .long SYMBOL_NAME(sys_ni_syscall) /* 0 - old "setup()" system call*/ + .long SYMBOL_NAME(sys_exit) + .long SYMBOL_NAME(sys_fork) + .long SYMBOL_NAME(sys_read) + .long SYMBOL_NAME(sys_write) + .long SYMBOL_NAME(sys_open) /* 5 */ + .long SYMBOL_NAME(sys_close) + .long SYMBOL_NAME(sys_waitpid) + .long SYMBOL_NAME(sys_creat) + .long SYMBOL_NAME(sys_link) + .long SYMBOL_NAME(sys_unlink) /* 10 */ + .long SYMBOL_NAME(sys_execve) + .long SYMBOL_NAME(sys_chdir) + .long SYMBOL_NAME(sys_time) + .long SYMBOL_NAME(sys_mknod) + .long SYMBOL_NAME(sys_chmod) /* 15 */ + .long SYMBOL_NAME(sys_chown16) + .long SYMBOL_NAME(sys_ni_syscall) /* old break syscall holder */ + .long SYMBOL_NAME(sys_stat) + .long SYMBOL_NAME(sys_lseek) + .long SYMBOL_NAME(sys_getpid) /* 20 */ + .long SYMBOL_NAME(sys_mount) + .long SYMBOL_NAME(sys_oldumount) + .long SYMBOL_NAME(sys_setuid16) + .long SYMBOL_NAME(sys_getuid16) + .long SYMBOL_NAME(sys_stime) /* 25 */ + .long SYMBOL_NAME(sys_ptrace) + .long SYMBOL_NAME(sys_alarm) + .long SYMBOL_NAME(sys_fstat) + .long SYMBOL_NAME(sys_pause) + .long SYMBOL_NAME(sys_utime) /* 30 */ + .long SYMBOL_NAME(sys_ni_syscall) /* old stty syscall holder */ + .long SYMBOL_NAME(sys_ni_syscall) /* old gtty syscall holder */ + .long SYMBOL_NAME(sys_access) + .long SYMBOL_NAME(sys_nice) + .long SYMBOL_NAME(sys_ni_syscall) /* 35 */ /* old ftime syscall holder */ + .long SYMBOL_NAME(sys_sync) + .long SYMBOL_NAME(sys_kill) + .long SYMBOL_NAME(sys_rename) + .long SYMBOL_NAME(sys_mkdir) + .long SYMBOL_NAME(sys_rmdir) /* 40 */ + .long SYMBOL_NAME(sys_dup) + .long SYMBOL_NAME(sys_pipe) + .long SYMBOL_NAME(sys_times) + .long SYMBOL_NAME(sys_ni_syscall) /* old prof syscall holder */ + .long SYMBOL_NAME(sys_brk) /* 45 */ + .long SYMBOL_NAME(sys_setgid16) + .long SYMBOL_NAME(sys_getgid16) + .long SYMBOL_NAME(sys_signal) + .long SYMBOL_NAME(sys_geteuid16) + .long SYMBOL_NAME(sys_getegid16) /* 50 */ + .long SYMBOL_NAME(sys_acct) + .long SYMBOL_NAME(sys_umount) /* recycled never used phys() */ + .long SYMBOL_NAME(sys_ni_syscall) /* old lock syscall holder */ + .long SYMBOL_NAME(sys_ioctl) + .long SYMBOL_NAME(sys_fcntl) /* 55 */ + .long SYMBOL_NAME(sys_ni_syscall) /* old mpx syscall holder */ + .long SYMBOL_NAME(sys_setpgid) + .long SYMBOL_NAME(sys_ni_syscall) /* old ulimit syscall holder */ + .long SYMBOL_NAME(sys_ni_syscall) + .long SYMBOL_NAME(sys_umask) /* 60 */ + .long SYMBOL_NAME(sys_chroot) + .long SYMBOL_NAME(sys_ustat) + .long SYMBOL_NAME(sys_dup2) + .long SYMBOL_NAME(sys_getppid) + .long SYMBOL_NAME(sys_getpgrp) /* 65 */ + .long SYMBOL_NAME(sys_setsid) + .long SYMBOL_NAME(sys_sigaction) + .long SYMBOL_NAME(sys_sgetmask) + .long SYMBOL_NAME(sys_ssetmask) + .long SYMBOL_NAME(sys_setreuid16) /* 70 */ + .long SYMBOL_NAME(sys_setregid16) + .long SYMBOL_NAME(sys_sigsuspend) + .long SYMBOL_NAME(sys_sigpending) + .long SYMBOL_NAME(sys_sethostname) + .long SYMBOL_NAME(sys_setrlimit) /* 75 */ + .long SYMBOL_NAME(sys_old_getrlimit) + .long SYMBOL_NAME(sys_getrusage) + .long SYMBOL_NAME(sys_gettimeofday) + .long SYMBOL_NAME(sys_settimeofday) + .long SYMBOL_NAME(sys_getgroups16) /* 80 */ + .long SYMBOL_NAME(sys_setgroups16) + .long SYMBOL_NAME(old_select) + .long SYMBOL_NAME(sys_symlink) + .long SYMBOL_NAME(sys_lstat) + .long SYMBOL_NAME(sys_readlink) /* 85 */ + .long SYMBOL_NAME(sys_uselib) + .long SYMBOL_NAME(sys_swapon) + .long SYMBOL_NAME(sys_reboot) + .long SYMBOL_NAME(old_readdir) + .long SYMBOL_NAME(old_mmap) /* 90 */ + .long SYMBOL_NAME(sys_munmap) + .long SYMBOL_NAME(sys_truncate) + .long SYMBOL_NAME(sys_ftruncate) + .long SYMBOL_NAME(sys_fchmod) + .long SYMBOL_NAME(sys_fchown16) /* 95 */ + .long SYMBOL_NAME(sys_getpriority) + .long SYMBOL_NAME(sys_setpriority) + .long SYMBOL_NAME(sys_ni_syscall) /* old profil syscall holder */ + .long SYMBOL_NAME(sys_statfs) + .long SYMBOL_NAME(sys_fstatfs) /* 100 */ + .long SYMBOL_NAME(sys_ni_syscall) /* ioperm for i386 */ + .long SYMBOL_NAME(sys_socketcall) + .long SYMBOL_NAME(sys_syslog) + .long SYMBOL_NAME(sys_setitimer) + .long SYMBOL_NAME(sys_getitimer) /* 105 */ + .long SYMBOL_NAME(sys_newstat) + .long SYMBOL_NAME(sys_newlstat) + .long SYMBOL_NAME(sys_newfstat) + .long SYMBOL_NAME(sys_ni_syscall) + .long SYMBOL_NAME(sys_ni_syscall) /* iopl for i386 */ /* 110 */ + .long SYMBOL_NAME(sys_vhangup) + .long SYMBOL_NAME(sys_ni_syscall) /* obsolete idle() syscall */ + .long SYMBOL_NAME(sys_ni_syscall) /* vm86old for i386 */ + .long SYMBOL_NAME(sys_wait4) + .long SYMBOL_NAME(sys_swapoff) /* 115 */ + .long SYMBOL_NAME(sys_sysinfo) + .long SYMBOL_NAME(sys_ipc) + .long SYMBOL_NAME(sys_fsync) + .long SYMBOL_NAME(sys_sigreturn) + .long SYMBOL_NAME(sys_clone) /* 120 */ + .long SYMBOL_NAME(sys_setdomainname) + .long SYMBOL_NAME(sys_newuname) + .long SYMBOL_NAME(sys_cacheflush) /* modify_ldt for i386 */ + .long SYMBOL_NAME(sys_adjtimex) + .long SYMBOL_NAME(sys_ni_syscall) /* 125 sys_mprotect */ + .long SYMBOL_NAME(sys_sigprocmask) + .long SYMBOL_NAME(sys_ni_syscall) /* sys_create_module */ + .long SYMBOL_NAME(sys_init_module) + .long SYMBOL_NAME(sys_delete_module) + .long SYMBOL_NAME(sys_ni_syscall) /* 130 sys_get_kernel_syms */ + .long SYMBOL_NAME(sys_quotactl) + .long SYMBOL_NAME(sys_getpgid) + .long SYMBOL_NAME(sys_fchdir) + .long SYMBOL_NAME(sys_bdflush) + .long SYMBOL_NAME(sys_sysfs) /* 135 */ + .long SYMBOL_NAME(sys_personality) + .long SYMBOL_NAME(sys_ni_syscall) /* for afs_syscall */ + .long SYMBOL_NAME(sys_setfsuid16) + .long SYMBOL_NAME(sys_setfsgid16) + .long SYMBOL_NAME(sys_llseek) /* 140 */ + .long SYMBOL_NAME(sys_getdents) + .long SYMBOL_NAME(sys_select) + .long SYMBOL_NAME(sys_flock) + .long SYMBOL_NAME(sys_ni_syscall) /* sys_msync */ + .long SYMBOL_NAME(sys_readv) /* 145 */ + .long SYMBOL_NAME(sys_writev) + .long SYMBOL_NAME(sys_getsid) + .long SYMBOL_NAME(sys_fdatasync) + .long SYMBOL_NAME(sys_sysctl) + .long SYMBOL_NAME(sys_ni_syscall) /* 150 sys_mlock */ + .long SYMBOL_NAME(sys_ni_syscall) /* sys_munlock */ + .long SYMBOL_NAME(sys_ni_syscall) /* sys_mlockall */ + .long SYMBOL_NAME(sys_ni_syscall) /* sys_munlockall */ + .long SYMBOL_NAME(sys_sched_setparam) + .long SYMBOL_NAME(sys_sched_getparam) /* 155 */ + .long SYMBOL_NAME(sys_sched_setscheduler) + .long SYMBOL_NAME(sys_sched_getscheduler) + .long SYMBOL_NAME(sys_sched_yield) + .long SYMBOL_NAME(sys_sched_get_priority_max) + .long SYMBOL_NAME(sys_sched_get_priority_min) /* 160 */ + .long SYMBOL_NAME(sys_sched_rr_get_interval) + .long SYMBOL_NAME(sys_nanosleep) + .long SYMBOL_NAME(sys_ni_syscall) /* sys_mremap */ + .long SYMBOL_NAME(sys_setresuid16) + .long SYMBOL_NAME(sys_getresuid16) /* 165 */ + .long SYMBOL_NAME(sys_ni_syscall) /* for vm86 */ + .long SYMBOL_NAME(sys_ni_syscall) /* sys_query_module */ + .long SYMBOL_NAME(sys_poll) + .long SYMBOL_NAME(sys_nfsservctl) + .long SYMBOL_NAME(sys_setresgid16) /* 170 */ + .long SYMBOL_NAME(sys_getresgid16) + .long SYMBOL_NAME(sys_prctl) + .long SYMBOL_NAME(sys_rt_sigreturn) + .long SYMBOL_NAME(sys_rt_sigaction) + .long SYMBOL_NAME(sys_rt_sigprocmask) /* 175 */ + .long SYMBOL_NAME(sys_rt_sigpending) + .long SYMBOL_NAME(sys_rt_sigtimedwait) + .long SYMBOL_NAME(sys_rt_sigqueueinfo) + .long SYMBOL_NAME(sys_rt_sigsuspend) + .long SYMBOL_NAME(sys_pread64) /* 180 */ + .long SYMBOL_NAME(sys_pwrite64) + .long SYMBOL_NAME(sys_lchown16); + .long SYMBOL_NAME(sys_getcwd) + .long SYMBOL_NAME(sys_capget) + .long SYMBOL_NAME(sys_capset) /* 185 */ + .long SYMBOL_NAME(sys_sigaltstack) + .long SYMBOL_NAME(sys_sendfile) + .long SYMBOL_NAME(sys_ni_syscall) /* streams1 */ + .long SYMBOL_NAME(sys_ni_syscall) /* streams2 */ + .long SYMBOL_NAME(sys_vfork) /* 190 */ + .long SYMBOL_NAME(sys_getrlimit) + .long SYMBOL_NAME(sys_mmap2) + .long SYMBOL_NAME(sys_truncate64) + .long SYMBOL_NAME(sys_ftruncate64) + .long SYMBOL_NAME(sys_stat64) /* 195 */ + .long SYMBOL_NAME(sys_lstat64) + .long SYMBOL_NAME(sys_fstat64) + .long SYMBOL_NAME(sys_chown) + .long SYMBOL_NAME(sys_getuid) + .long SYMBOL_NAME(sys_getgid) /* 200 */ + .long SYMBOL_NAME(sys_geteuid) + .long SYMBOL_NAME(sys_getegid) + .long SYMBOL_NAME(sys_setreuid) + .long SYMBOL_NAME(sys_setregid) + .long SYMBOL_NAME(sys_getgroups) /* 205 */ + .long SYMBOL_NAME(sys_setgroups) + .long SYMBOL_NAME(sys_fchown) + .long SYMBOL_NAME(sys_setresuid) + .long SYMBOL_NAME(sys_getresuid) + .long SYMBOL_NAME(sys_setresgid) /* 210 */ + .long SYMBOL_NAME(sys_getresgid) + .long SYMBOL_NAME(sys_lchown) + .long SYMBOL_NAME(sys_setuid) + .long SYMBOL_NAME(sys_setgid) + .long SYMBOL_NAME(sys_setfsuid) /* 215 */ + .long SYMBOL_NAME(sys_setfsgid) + .long SYMBOL_NAME(sys_pivot_root) + .long SYMBOL_NAME(sys_ni_syscall) + .long SYMBOL_NAME(sys_ni_syscall) + .long SYMBOL_NAME(sys_getdents64) /* 220 */ + .long SYMBOL_NAME(sys_fcntl64) + .long SYMBOL_NAME(sys_ni_syscall) /* reserved for TUX */ + .long SYMBOL_NAME(sys_ni_syscall) + .long SYMBOL_NAME(sys_gettid) + .long SYMBOL_NAME(sys_ni_syscall) /* 225 */ /* sys_readahead */ + .long SYMBOL_NAME(sys_setxattr) + .long SYMBOL_NAME(sys_lsetxattr) + .long SYMBOL_NAME(sys_fsetxattr) + .long SYMBOL_NAME(sys_getxattr) + .long SYMBOL_NAME(sys_lgetxattr) /* 230 */ + .long SYMBOL_NAME(sys_fgetxattr) + .long SYMBOL_NAME(sys_listxattr) + .long SYMBOL_NAME(sys_llistxattr) + .long SYMBOL_NAME(sys_flistxattr) + .long SYMBOL_NAME(sys_removexattr) /* 235 */ + .long SYMBOL_NAME(sys_lremovexattr) + .long SYMBOL_NAME(sys_fremovexattr) + .long SYMBOL_NAME(sys_tkill) + .long SYMBOL_NAME(sys_sendfile64) + .long SYMBOL_NAME(sys_futex) /* 240 */ + .long SYMBOL_NAME(sys_sched_setaffinity) + .long SYMBOL_NAME(sys_sched_getaffinity) + .long SYMBOL_NAME(sys_ni_syscall) /* sys_set_thread_area */ + .long SYMBOL_NAME(sys_ni_syscall) /* sys_get_thread_area */ + .long SYMBOL_NAME(sys_io_setup) /* 245 */ + .long SYMBOL_NAME(sys_io_destroy) + .long SYMBOL_NAME(sys_io_getevents) + .long SYMBOL_NAME(sys_io_submit) + .long SYMBOL_NAME(sys_io_cancel) + .long SYMBOL_NAME(sys_fadvise64) /* 250 */ + .long SYMBOL_NAME(sys_ni_syscall) + .long SYMBOL_NAME(sys_exit_group) + .long SYMBOL_NAME(sys_lookup_dcookie) + .long SYMBOL_NAME(sys_epoll_create) + .long SYMBOL_NAME(sys_epoll_ctl) /* 255 */ + .long SYMBOL_NAME(sys_epoll_wait) + .long SYMBOL_NAME(sys_ni_syscall) /* sys_remap_file_pages */ + .long SYMBOL_NAME(sys_set_tid_address) + .long SYMBOL_NAME(sys_timer_create) + .long SYMBOL_NAME(sys_timer_settime) /* 260 */ + .long SYMBOL_NAME(sys_timer_gettime) + .long SYMBOL_NAME(sys_timer_getoverrun) + .long SYMBOL_NAME(sys_timer_delete) + .long SYMBOL_NAME(sys_clock_settime) + .long SYMBOL_NAME(sys_clock_gettime) /* 265 */ + .long SYMBOL_NAME(sys_clock_getres) + .long SYMBOL_NAME(sys_clock_nanosleep) + .long SYMBOL_NAME(sys_statfs64) + .long SYMBOL_NAME(sys_fstatfs64) + .long SYMBOL_NAME(sys_tgkill) /* 270 */ + .long SYMBOL_NAME(sys_utimes) + .long SYMBOL_NAME(sys_fadvise64_64) + .long SYMBOL_NAME(sys_ni_syscall) /* sys_vserver */ + .long SYMBOL_NAME(sys_mbind) + .long SYMBOL_NAME(sys_get_mempolicy) + .long SYMBOL_NAME(sys_set_mempolicy) + .long SYMBOL_NAME(sys_mq_open) + .long SYMBOL_NAME(sys_mq_unlink) + .long SYMBOL_NAME(sys_mq_timedsend) + .long SYMBOL_NAME(sys_mq_timedreceive) /* 280 */ + .long SYMBOL_NAME(sys_mq_notify) + .long SYMBOL_NAME(sys_mq_getsetattr) + .long SYMBOL_NAME(sys_ni_syscall) /* reserved for kexec */ + .long SYMBOL_NAME(sys_waitid) + .long SYMBOL_NAME(sys_ni_syscall) /* 285 */ /* available */ + .long SYMBOL_NAME(sys_add_key) + .long SYMBOL_NAME(sys_request_key) + .long SYMBOL_NAME(sys_keyctl) + + .rept NR_syscalls-(.-SYMBOL_NAME(sys_call_table))/4 + .long SYMBOL_NAME(sys_ni_syscall) + .endr + + .macro call_sp addr + mov.l #SYMBOL_NAME(\addr),er6 + bra SYMBOL_NAME(syscall_trampoline):8 + .endm + +SYMBOL_NAME_LABEL(sys_clone) + call_sp h8300_clone + +SYMBOL_NAME_LABEL(sys_sigsuspend) + call_sp do_sigsuspend + +SYMBOL_NAME_LABEL(sys_rt_sigsuspend) + call_sp do_rt_sigsuspend + +SYMBOL_NAME_LABEL(sys_sigreturn) + call_sp do_sigreturn + +SYMBOL_NAME_LABEL(sys_rt_sigreturn) + call_sp do_rt_sigreturn + +SYMBOL_NAME_LABEL(sys_fork) + call_sp h8300_fork + +SYMBOL_NAME_LABEL(sys_vfork) + call_sp h8300_vfork + +SYMBOL_NAME_LABEL(syscall_trampoline) + mov.l sp,er0 + jmp @er6 diff --git a/arch/h8300/kernel/time.c b/arch/h8300/kernel/time.c new file mode 100644 index 00000000000..8a600218334 --- /dev/null +++ b/arch/h8300/kernel/time.c @@ -0,0 +1,134 @@ +/* + * linux/arch/h8300/kernel/time.c + * + * Yoshinori Sato <ysato@users.sourceforge.jp> + * + * Copied/hacked from: + * + * linux/arch/m68k/kernel/time.c + * + * Copyright (C) 1991, 1992, 1995 Linus Torvalds + * + * This file contains the m68k-specific time handling details. + * Most of the stuff is located in the machine specific files. + * + * 1997-09-10 Updated NTP code according to technical memorandum Jan '96 + * "A Kernel Model for Precision Timekeeping" by Dave Mills + */ + +#include <linux/config.h> /* CONFIG_HEARTBEAT */ +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/timex.h> +#include <linux/profile.h> + +#include <asm/io.h> +#include <asm/target_time.h> + +#define TICK_SIZE (tick_nsec / 1000) + +u64 jiffies_64; + +EXPORT_SYMBOL(jiffies_64); + +/* + * timer_interrupt() needs to keep up the real-time clock, + * as well as call the "do_timer()" routine every clocktick + */ +static void timer_interrupt(int irq, void *dummy, struct pt_regs * regs) +{ + /* may need to kick the hardware timer */ + platform_timer_eoi(); + + do_timer(regs); +#ifndef CONFIG_SMP + update_process_times(user_mode(regs)); +#endif + profile_tick(CPU_PROFILING, regs); +} + +void time_init(void) +{ + unsigned int year, mon, day, hour, min, sec; + + /* FIX by dqg : Set to zero for platforms that don't have tod */ + /* without this time is undefined and can overflow time_t, causing */ + /* very stange errors */ + year = 1980; + mon = day = 1; + hour = min = sec = 0; + platform_gettod (&year, &mon, &day, &hour, &min, &sec); + + if ((year += 1900) < 1970) + year += 100; + xtime.tv_sec = mktime(year, mon, day, hour, min, sec); + xtime.tv_nsec = 0; + + platform_timer_setup(timer_interrupt); +} + +/* + * This version of gettimeofday has near microsecond resolution. + */ +void do_gettimeofday(struct timeval *tv) +{ + unsigned long flags; + unsigned long usec, sec; + + read_lock_irqsave(&xtime_lock, flags); + usec = 0; + sec = xtime.tv_sec; + usec += (xtime.tv_nsec / 1000); + read_unlock_irqrestore(&xtime_lock, flags); + + while (usec >= 1000000) { + usec -= 1000000; + sec++; + } + + tv->tv_sec = sec; + tv->tv_usec = usec; +} + +EXPORT_SYMBOL(do_gettimeofday); + +int do_settimeofday(struct timespec *tv) +{ + if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) + return -EINVAL; + + write_lock_irq(&xtime_lock); + /* This is revolting. We need to set the xtime.tv_usec + * correctly. However, the value in this location is + * is value at the last tick. + * Discover what correction gettimeofday + * would have done, and then undo it! + */ + while (tv->tv_nsec < 0) { + tv->tv_nsec += NSEC_PER_SEC; + tv->tv_sec--; + } + + xtime.tv_sec = tv->tv_sec; + xtime.tv_nsec = tv->tv_nsec; + time_adjust = 0; /* stop active adjtime() */ + time_status |= STA_UNSYNC; + time_maxerror = NTP_PHASE_LIMIT; + time_esterror = NTP_PHASE_LIMIT; + write_sequnlock_irq(&xtime_lock); + clock_was_set(); + return 0; +} + +EXPORT_SYMBOL(do_settimeofday); + +unsigned long long sched_clock(void) +{ + return (unsigned long long)jiffies * (1000000000 / HZ); + +} diff --git a/arch/h8300/kernel/traps.c b/arch/h8300/kernel/traps.c new file mode 100644 index 00000000000..300e3279ca5 --- /dev/null +++ b/arch/h8300/kernel/traps.c @@ -0,0 +1,169 @@ +/* + * linux/arch/h8300/boot/traps.c -- general exception handling code + * H8/300 support Yoshinori Sato <ysato@users.sourceforge.jp> + * + * Cloned from Linux/m68k. + * + * No original Copyright holder listed, + * Probabily original (C) Roman Zippel (assigned DJD, 1999) + * + * Copyright 1999-2000 D. Jeff Dionne, <jeff@rt-control.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#include <linux/types.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/module.h> + +#include <asm/system.h> +#include <asm/irq.h> +#include <asm/traps.h> +#include <asm/page.h> +#include <asm/gpio.h> + +/* + * this must be called very early as the kernel might + * use some instruction that are emulated on the 060 + */ + +void __init base_trap_init(void) +{ +} + +void __init trap_init (void) +{ +} + +asmlinkage void set_esp0 (unsigned long ssp) +{ + current->thread.esp0 = ssp; +} + +/* + * Generic dumping code. Used for panic and debug. + */ + +static void dump(struct pt_regs *fp) +{ + unsigned long *sp; + unsigned char *tp; + int i; + + printk("\nCURRENT PROCESS:\n\n"); + printk("COMM=%s PID=%d\n", current->comm, current->pid); + if (current->mm) { + printk("TEXT=%08x-%08x DATA=%08x-%08x BSS=%08x-%08x\n", + (int) current->mm->start_code, + (int) current->mm->end_code, + (int) current->mm->start_data, + (int) current->mm->end_data, + (int) current->mm->end_data, + (int) current->mm->brk); + printk("USER-STACK=%08x KERNEL-STACK=%08lx\n\n", + (int) current->mm->start_stack, + (int) PAGE_SIZE+(unsigned long)current); + } + + show_regs(fp); + printk("\nCODE:"); + tp = ((unsigned char *) fp->pc) - 0x20; + for (sp = (unsigned long *) tp, i = 0; (i < 0x40); i += 4) { + if ((i % 0x10) == 0) + printk("\n%08x: ", (int) (tp + i)); + printk("%08x ", (int) *sp++); + } + printk("\n"); + + printk("\nKERNEL STACK:"); + tp = ((unsigned char *) fp) - 0x40; + for (sp = (unsigned long *) tp, i = 0; (i < 0xc0); i += 4) { + if ((i % 0x10) == 0) + printk("\n%08x: ", (int) (tp + i)); + printk("%08x ", (int) *sp++); + } + printk("\n"); + if (STACK_MAGIC != *(unsigned long *)((unsigned long)current+PAGE_SIZE)) + printk("(Possibly corrupted stack page??)\n"); + + printk("\n\n"); +} + +void die_if_kernel (char *str, struct pt_regs *fp, int nr) +{ + extern int console_loglevel; + + if (!(fp->ccr & PS_S)) + return; + + console_loglevel = 15; + dump(fp); + + do_exit(SIGSEGV); +} + +extern char _start, _etext; +#define check_kernel_text(addr) \ + ((addr >= (unsigned long)(&_start)) && \ + (addr < (unsigned long)(&_etext))) + +static int kstack_depth_to_print = 24; + +void show_stack(struct task_struct *task, unsigned long *esp) +{ + unsigned long *stack, addr; + int i; + + if (esp == NULL) + esp = (unsigned long *) &esp; + + stack = esp; + + printk("Stack from %08lx:", (unsigned long)stack); + for (i = 0; i < kstack_depth_to_print; i++) { + if (((unsigned long)stack & (THREAD_SIZE - 1)) == 0) + break; + if (i % 8 == 0) + printk("\n "); + printk(" %08lx", *stack++); + } + + printk("\nCall Trace:"); + i = 0; + stack = esp; + while (((unsigned long)stack & (THREAD_SIZE - 1)) == 0) { + addr = *stack++; + /* + * If the address is either in the text segment of the + * kernel, or in the region which contains vmalloc'ed + * memory, it *may* be the address of a calling + * routine; if so, print it so that someone tracing + * down the cause of the crash will be able to figure + * out the call path that was taken. + */ + if (check_kernel_text(addr)) { + if (i % 4 == 0) + printk("\n "); + printk(" [<%08lx>]", addr); + i++; + } + } + printk("\n"); +} + +void show_trace_task(struct task_struct *tsk) +{ + show_stack(tsk,(unsigned long *)tsk->thread.esp0); +} + +void dump_stack(void) +{ + show_stack(NULL,NULL); +} + +EXPORT_SYMBOL(dump_stack); diff --git a/arch/h8300/kernel/vmlinux.lds.S b/arch/h8300/kernel/vmlinux.lds.S new file mode 100644 index 00000000000..17fa11da1e4 --- /dev/null +++ b/arch/h8300/kernel/vmlinux.lds.S @@ -0,0 +1,172 @@ +#define VMLINUX_SYMBOL(_sym_) _##_sym_ +#include <asm-generic/vmlinux.lds.h> +#include <linux/config.h> + +/* target memory map */ +#ifdef CONFIG_H8300H_GENERIC +#define ROMTOP 0x000000 +#define ROMSIZE 0x400000 +#define RAMTOP 0x400000 +#define RAMSIZE 0x400000 +#endif + +#ifdef CONFIG_H8300H_AKI3068NET +#define ROMTOP 0x000000 +#define ROMSIZE 0x080000 +#define RAMTOP 0x400000 +#define RAMSIZE 0x200000 +#endif + +#ifdef CONFIG_H8300H_H8MAX +#define ROMTOP 0x000000 +#define ROMSIZE 0x080000 +#define RAMTOP 0x400000 +#define RAMSIZE 0x200000 +#endif + +#ifdef CONFIG_H8300H_SIM +#define ROMTOP 0x000000 +#define ROMSIZE 0x400000 +#define RAMTOP 0x400000 +#define RAMSIZE 0x400000 +#endif + +#ifdef CONFIG_H8S_SIM +#define ROMTOP 0x000000 +#define ROMSIZE 0x400000 +#define RAMTOP 0x400000 +#define RAMSIZE 0x800000 +#endif + +#ifdef CONFIG_H8S_EDOSK2674 +#define ROMTOP 0x000000 +#define ROMSIZE 0x400000 +#define RAMTOP 0x400000 +#define RAMSIZE 0x800000 +#endif + +#if defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM) +INPUT(romfs.o) +#endif + +_jiffies = _jiffies_64 + 4; + +ENTRY(__start) + +SECTIONS +{ +#if defined(CONFIG_ROMKERNEL) + . = ROMTOP; + .vectors : + { + __vector = . ; + *(.vectors*) + } +#else + . = RAMTOP; + .bootvec : + { + *(.bootvec) + } +#endif + .text : + { +#if defined(CONFIG_ROMKERNEL) + *(.int_redirect) +#endif + __stext = . ; + *(.text) + SCHED_TEXT + LOCK_TEXT + __etext = . ; + . = ALIGN(16); /* Exception table */ + ___start___ex_table = .; + *(__ex_table) + ___stop___ex_table = .; + } + + RODATA +#if defined(CONFIG_ROMKERNEL) + SECURITY_INIT +#endif + ROEND = .; +#if defined(CONFIG_ROMKERNEL) + . = RAMTOP; + .data : AT(ROEND) +#else + .data : +#endif + { + __sdata = . ; + ___data_start = . ; + + . = ALIGN(0x2000) ; + *(.data.init_task) + . = ALIGN(0x4) ; + *(.data) + . = ALIGN(0x4) ; + *(.data.*) + + . = ALIGN(0x4) ; + ___init_begin = .; + __sinittext = .; + *(.init.text) + __einittext = .; + *(.init.data) + . = ALIGN(0x4) ; + ___setup_start = .; + *(.init.setup) + . = ALIGN(0x4) ; + ___setup_end = .; + ___initcall_start = .; + *(.initcall1.init) + *(.initcall2.init) + *(.initcall3.init) + *(.initcall4.init) + *(.initcall5.init) + *(.initcall6.init) + *(.initcall7.init) + ___initcall_end = .; + ___con_initcall_start = .; + *(.con_initcall.init) + ___con_initcall_end = .; + *(.exit.text) + *(.exit.data) + . = ALIGN(4); + ___initramfs_start = .; + *(.init.ramfs) + ___initramfs_end = .; + . = ALIGN(0x4) ; + ___init_end = .; + __edata = . ; + } +#if defined(CONFIG_RAMKERNEL) + SECURITY_INIT +#endif + __begin_data = LOADADDR(.data); + .bss : + { + . = ALIGN(0x4) ; + __sbss = . ; + *(.bss*) + . = ALIGN(0x4) ; + *(COMMON) + . = ALIGN(0x4) ; + __ebss = . ; + __end = . ; + __ramstart = .; + } + /DISCARD/ : { + *(.exitcall.exit) + } + .romfs : + { + *(.romfs*) + } + . = RAMTOP+RAMSIZE; + .dummy : + { + COMMAND_START = . - 0x200 ; + __ramend = . ; + } +} diff --git a/arch/h8300/lib/Makefile b/arch/h8300/lib/Makefile new file mode 100644 index 00000000000..98272b66f4e --- /dev/null +++ b/arch/h8300/lib/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for H8/300-specific library files.. +# + +.S.o: + $(CC) $(AFLAGS) -D__ASSEMBLY__ -c $< -o $@ + +lib-y = ashrdi3.o checksum.o memcpy.o memset.o abs.o romfs.o diff --git a/arch/h8300/lib/abs.S b/arch/h8300/lib/abs.S new file mode 100644 index 00000000000..cabdd46b41d --- /dev/null +++ b/arch/h8300/lib/abs.S @@ -0,0 +1,21 @@ +;;; abs.S + +#include <asm/linkage.h> + +#if defined(__H8300H__) + .h8300h +#endif +#if defined(__H8300S__) + .h8300s +#endif + .text +.global SYMBOL_NAME(abs) + +;;; int abs(int n) +SYMBOL_NAME_LABEL(abs) + mov.l er0,er0 + bpl 1f + neg.l er0 +1: + rts + diff --git a/arch/h8300/lib/ashrdi3.c b/arch/h8300/lib/ashrdi3.c new file mode 100644 index 00000000000..78efb65e315 --- /dev/null +++ b/arch/h8300/lib/ashrdi3.c @@ -0,0 +1,63 @@ +/* ashrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */ +/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc. + +This file is part of GNU CC. + +GNU CC is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2, or (at your option) +any later version. + +GNU CC is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with GNU CC; see the file COPYING. If not, write to +the Free Software Foundation, 59 Temple Place - Suite 330, +Boston, MA 02111-1307, USA. */ + +#define BITS_PER_UNIT 8 + +typedef int SItype __attribute__ ((mode (SI))); +typedef unsigned int USItype __attribute__ ((mode (SI))); +typedef int DItype __attribute__ ((mode (DI))); +typedef int word_type __attribute__ ((mode (__word__))); + +struct DIstruct {SItype high, low;}; + +typedef union +{ + struct DIstruct s; + DItype ll; +} DIunion; + +DItype +__ashrdi3 (DItype u, word_type b) +{ + DIunion w; + word_type bm; + DIunion uu; + + if (b == 0) + return u; + + uu.ll = u; + + bm = (sizeof (SItype) * BITS_PER_UNIT) - b; + if (bm <= 0) + { + /* w.s.high = 1..1 or 0..0 */ + w.s.high = uu.s.high >> (sizeof (SItype) * BITS_PER_UNIT - 1); + w.s.low = uu.s.high >> -bm; + } + else + { + USItype carries = (USItype)uu.s.high << bm; + w.s.high = uu.s.high >> b; + w.s.low = ((USItype)uu.s.low >> b) | carries; + } + + return w.ll; +} diff --git a/arch/h8300/lib/checksum.c b/arch/h8300/lib/checksum.c new file mode 100644 index 00000000000..5aa688d9242 --- /dev/null +++ b/arch/h8300/lib/checksum.c @@ -0,0 +1,159 @@ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * IP/TCP/UDP checksumming routines + * + * Authors: Jorge Cwik, <jorge@laser.satlink.net> + * Arnt Gulbrandsen, <agulbra@nvg.unit.no> + * Tom May, <ftom@netcom.com> + * Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de> + * Lots of code moved from tcp.c and ip.c; see those files + * for more names. + * + * 03/02/96 Jes Sorensen, Andreas Schwab, Roman Hodek: + * Fixed some nasty bugs, causing some horrible crashes. + * A: At some points, the sum (%0) was used as + * length-counter instead of the length counter + * (%1). Thanks to Roman Hodek for pointing this out. + * B: GCC seems to mess up if one uses too many + * data-registers to hold input values and one tries to + * specify d0 and d1 as scratch registers. Letting gcc choose these + * registers itself solves the problem. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access kills, so most + of the assembly has to go. */ + +#include <net/checksum.h> +#include <linux/module.h> + +static inline unsigned short from32to16(unsigned long x) +{ + /* add up 16-bit and 16-bit for 16+c bit */ + x = (x & 0xffff) + (x >> 16); + /* add up carry.. */ + x = (x & 0xffff) + (x >> 16); + return x; +} + +static unsigned long do_csum(const unsigned char * buff, int len) +{ + int odd, count; + unsigned long result = 0; + + if (len <= 0) + goto out; + odd = 1 & (unsigned long) buff; + if (odd) { + result = *buff; + len--; + buff++; + } + count = len >> 1; /* nr of 16-bit words.. */ + if (count) { + if (2 & (unsigned long) buff) { + result += *(unsigned short *) buff; + count--; + len -= 2; + buff += 2; + } + count >>= 1; /* nr of 32-bit words.. */ + if (count) { + unsigned long carry = 0; + do { + unsigned long w = *(unsigned long *) buff; + count--; + buff += 4; + result += carry; + result += w; + carry = (w > result); + } while (count); + result += carry; + result = (result & 0xffff) + (result >> 16); + } + if (len & 2) { + result += *(unsigned short *) buff; + buff += 2; + } + } + if (len & 1) + result += (*buff << 8); + result = from32to16(result); + if (odd) + result = ((result >> 8) & 0xff) | ((result & 0xff) << 8); +out: + return result; +} + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + */ +unsigned short ip_fast_csum(unsigned char * iph, unsigned int ihl) +{ + return ~do_csum(iph,ihl*4); +} + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum) +{ + unsigned int result = do_csum(buff, len); + + /* add in old sum, and carry.. */ + result += sum; + /* 16+c bits -> 16 bits */ + result = (result & 0xffff) + (result >> 16); + return result; +} + +EXPORT_SYMBOL(csum_partial); + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ +unsigned short ip_compute_csum(const unsigned char * buff, int len) +{ + return ~do_csum(buff,len); +} + +/* + * copy from fs while checksumming, otherwise like csum_partial + */ + +unsigned int +csum_partial_copy_from_user(const char *src, char *dst, int len, int sum, int *csum_err) +{ + if (csum_err) *csum_err = 0; + memcpy(dst, src, len); + return csum_partial(dst, len, sum); +} + +/* + * copy from ds while checksumming, otherwise like csum_partial + */ + +unsigned int +csum_partial_copy(const char *src, char *dst, int len, int sum) +{ + memcpy(dst, src, len); + return csum_partial(dst, len, sum); +} diff --git a/arch/h8300/lib/memcpy.S b/arch/h8300/lib/memcpy.S new file mode 100644 index 00000000000..fdcbc1ee673 --- /dev/null +++ b/arch/h8300/lib/memcpy.S @@ -0,0 +1,84 @@ +;;; memcpy.S + +#include <asm/linkage.h> + +#if defined(__H8300H__) + .h8300h +#endif +#if defined(__H8300S__) + .h8300s +#endif + + .text +.global SYMBOL_NAME(memcpy) + +;;; void *memcpy(void *to, void *from, size_t n) +SYMBOL_NAME_LABEL(memcpy) + mov.l er2,er2 + bne 1f + rts +1: + ;; address check + bld #0,r0l + bxor #0,r1l + bcs 4f + mov.l er4,@-sp + mov.l er0,@-sp + btst #0,r0l + beq 1f + ;; (aligned even) odd address + mov.b @er1,r3l + mov.b r3l,@er0 + adds #1,er1 + adds #1,er0 + dec.l #1,er2 + beq 3f +1: + ;; n < sizeof(unsigned long) check + sub.l er4,er4 + adds #4,er4 ; loop count check value + cmp.l er4,er2 + blo 2f + ;; unsigned long copy +1: + mov.l @er1,er3 + mov.l er3,@er0 + adds #4,er0 + adds #4,er1 + subs #4,er2 + cmp.l er4,er2 + bcc 1b + ;; rest +2: + mov.l er2,er2 + beq 3f +1: + mov.b @er1,r3l + mov.b r3l,@er0 + adds #1,er1 + adds #1,er0 + dec.l #1,er2 + bne 1b +3: + mov.l @sp+,er0 + mov.l @sp+,er4 + rts + + ;; odd <- even / even <- odd +4: + mov.l er4,er3 + mov.l er2,er4 + mov.l er5,er2 + mov.l er1,er5 + mov.l er6,er1 + mov.l er0,er6 +1: + eepmov.w + mov.w r4,r4 + bne 1b + dec.w #1,e4 + bpl 1b + mov.l er1,er6 + mov.l er2,er5 + mov.l er3,er4 + rts diff --git a/arch/h8300/lib/memset.S b/arch/h8300/lib/memset.S new file mode 100644 index 00000000000..59abdf9485a --- /dev/null +++ b/arch/h8300/lib/memset.S @@ -0,0 +1,61 @@ +/* memset.S */ + +#include <asm/linkage.h> + +#if defined(__H8300H__) + .h8300h +#endif +#if defined(__H8300S__) + .h8300s +#endif + .text + +.global SYMBOL_NAME(memset) + +;;void *memset(*ptr, int c, size_t count) +;; ptr = er0 +;; c = er1(r1l) +;; count = er2 +SYMBOL_NAME_LABEL(memset) + btst #0,r0l + beq 2f + + ;; odd address +1: + mov.b r1l,@er0 + adds #1,er0 + dec.l #1,er2 + beq 6f + + ;; even address +2: + mov.l er2,er3 + cmp.l #4,er2 + blo 4f + ;; count>=4 -> count/4 +#if defined(__H8300H__) + shlr.l er2 + shlr.l er2 +#endif +#if defined(__H8300S__) + shlr.l #2,er2 +#endif + ;; byte -> long + mov.b r1l,r1h + mov.w r1,e1 +3: + mov.l er1,@er0 + adds #4,er0 + dec.l #1,er2 + bne 3b +4: + ;; count % 4 + and.b #3,r3l + beq 6f +5: + mov.b r1l,@er0 + adds #1,er0 + dec.b r3l + bne 5b +6: + rts diff --git a/arch/h8300/lib/romfs.S b/arch/h8300/lib/romfs.S new file mode 100644 index 00000000000..b72f93a47e3 --- /dev/null +++ b/arch/h8300/lib/romfs.S @@ -0,0 +1,58 @@ +/* romfs move to __ebss */ + +#include <asm/linkage.h> +#include <linux/config.h> + +#if defined(__H8300H__) + .h8300h +#endif +#if defined(__H8300S__) + .h8300s +#endif + +#define BLKOFFSET 512 + + .text +.globl __move_romfs +_romfs_sig_len = 8 + +__move_romfs: + mov.l #__sbss,er0 + mov.l #_romfs_sig,er1 + mov.b #_romfs_sig_len,r3l +1: /* check romfs image */ + mov.b @er0+,r2l + mov.b @er1+,r2h + cmp.b r2l,r2h + bne 2f + dec.b r3l + bne 1b + + /* find romfs image */ + mov.l @__sbss+8,er0 /* romfs length(be) */ + mov.l #__sbss,er1 + add.l er0,er1 /* romfs image end */ + mov.l #__ebss,er2 + add.l er0,er2 /* distination address */ +#if defined(CONFIG_INTELFLASH) + add.l #BLKOFFSET,er2 +#endif + adds #2,er0 + adds #1,er0 + shlr er0 + shlr er0 /* transfer length */ +1: + mov.l @er1,er3 /* copy image */ + mov.l er3,@er2 + subs #4,er1 + subs #4,er2 + dec.l #1,er0 + bpl 1b +2: + rts + + .section .rodata +_romfs_sig: + .ascii "-rom1fs-" + + .end diff --git a/arch/h8300/mm/Makefile b/arch/h8300/mm/Makefile new file mode 100644 index 00000000000..5f4bc42b645 --- /dev/null +++ b/arch/h8300/mm/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the linux m68k-specific parts of the memory manager. +# + +obj-y := init.o fault.o memory.o kmap.o diff --git a/arch/h8300/mm/fault.c b/arch/h8300/mm/fault.c new file mode 100644 index 00000000000..29e9af9f0e6 --- /dev/null +++ b/arch/h8300/mm/fault.c @@ -0,0 +1,58 @@ +/* + * linux/arch/h8300/mm/fault.c + * + * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>, + * Copyright (C) 2000 Lineo, Inc. (www.lineo.com) + * + * Based on: + * + * linux/arch/m68knommu/mm/fault.c + * linux/arch/m68k/mm/fault.c + * + * Copyright (C) 1995 Hamish Macdonald + */ + +#include <linux/mman.h> +#include <linux/mm.h> +#include <linux/kernel.h> +#include <linux/ptrace.h> + +#include <asm/system.h> +#include <asm/pgtable.h> + +extern void die_if_kernel(char *, struct pt_regs *, long); + +/* + * This routine handles page faults. It determines the problem, and + * then passes it off to one of the appropriate routines. + * + * error_code: + * bit 0 == 0 means no page found, 1 means protection fault + * bit 1 == 0 means read, 1 means write + * + * If this routine detects a bad access, it returns 1, otherwise it + * returns 0. + */ +asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address, + unsigned long error_code) +{ +#ifdef DEBUG + printk ("regs->sr=%#x, regs->pc=%#lx, address=%#lx, %ld\n", + regs->sr, regs->pc, address, error_code); +#endif + +/* + * Oops. The kernel tried to access some bad page. We'll have to + * terminate things with extreme prejudice. + */ + if ((unsigned long) address < PAGE_SIZE) { + printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference"); + } else + printk(KERN_ALERT "Unable to handle kernel access"); + printk(" at virtual address %08lx\n",address); + die_if_kernel("Oops", regs, error_code); + do_exit(SIGKILL); + + return 1; +} + diff --git a/arch/h8300/mm/init.c b/arch/h8300/mm/init.c new file mode 100644 index 00000000000..1e0929ddc8c --- /dev/null +++ b/arch/h8300/mm/init.c @@ -0,0 +1,232 @@ +/* + * linux/arch/h8300/mm/init.c + * + * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>, + * Kenneth Albanowski <kjahds@kjahds.com>, + * Copyright (C) 2000 Lineo, Inc. (www.lineo.com) + * + * Based on: + * + * linux/arch/m68knommu/mm/init.c + * linux/arch/m68k/mm/init.c + * + * Copyright (C) 1995 Hamish Macdonald + * + * JAN/1999 -- hacked to support ColdFire (gerg@snapgear.com) + * DEC/2000 -- linux 2.4 support <davidm@snapgear.com> + */ + +#include <linux/config.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/ptrace.h> +#include <linux/mman.h> +#include <linux/mm.h> +#include <linux/swap.h> +#include <linux/init.h> +#include <linux/highmem.h> +#include <linux/pagemap.h> +#include <linux/bootmem.h> +#include <linux/slab.h> + +#include <asm/setup.h> +#include <asm/segment.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/system.h> + +#undef DEBUG + +extern void die_if_kernel(char *,struct pt_regs *,long); +extern void free_initmem(void); + +/* + * BAD_PAGE is the page that is used for page faults when linux + * is out-of-memory. Older versions of linux just did a + * do_exit(), but using this instead means there is less risk + * for a process dying in kernel mode, possibly leaving a inode + * unused etc.. + * + * BAD_PAGETABLE is the accompanying page-table: it is initialized + * to point to BAD_PAGE entries. + * + * ZERO_PAGE is a special page that is used for zero-initialized + * data and COW. + */ +static unsigned long empty_bad_page_table; + +static unsigned long empty_bad_page; + +unsigned long empty_zero_page; + +extern unsigned long rom_length; + +void show_mem(void) +{ + unsigned long i; + int free = 0, total = 0, reserved = 0, shared = 0; + int cached = 0; + + printk("\nMem-info:\n"); + show_free_areas(); + i = max_mapnr; + while (i-- > 0) { + total++; + if (PageReserved(mem_map+i)) + reserved++; + else if (PageSwapCache(mem_map+i)) + cached++; + else if (!page_count(mem_map+i)) + free++; + else + shared += page_count(mem_map+i) - 1; + } + printk("%d pages of RAM\n",total); + printk("%d free pages\n",free); + printk("%d reserved pages\n",reserved); + printk("%d pages shared\n",shared); + printk("%d pages swap cached\n",cached); +} + +extern unsigned long memory_start; +extern unsigned long memory_end; + +/* + * paging_init() continues the virtual memory environment setup which + * was begun by the code in arch/head.S. + * The parameters are pointers to where to stick the starting and ending + * addresses of available kernel virtual memory. + */ +void paging_init(void) +{ + /* + * Make sure start_mem is page aligned, otherwise bootmem and + * page_alloc get different views og the world. + */ +#ifdef DEBUG + unsigned long start_mem = PAGE_ALIGN(memory_start); +#endif + unsigned long end_mem = memory_end & PAGE_MASK; + +#ifdef DEBUG + printk ("start_mem is %#lx\nvirtual_end is %#lx\n", + start_mem, end_mem); +#endif + + /* + * Initialize the bad page table and bad page to point + * to a couple of allocated pages. + */ + empty_bad_page_table = (unsigned long)alloc_bootmem_pages(PAGE_SIZE); + empty_bad_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE); + empty_zero_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE); + memset((void *)empty_zero_page, 0, PAGE_SIZE); + + /* + * Set up SFC/DFC registers (user data space). + */ + set_fs (USER_DS); + +#ifdef DEBUG + printk ("before free_area_init\n"); + + printk ("free_area_init -> start_mem is %#lx\nvirtual_end is %#lx\n", + start_mem, end_mem); +#endif + + { + unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0}; + + zones_size[ZONE_DMA] = 0 >> PAGE_SHIFT; + zones_size[ZONE_NORMAL] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT; +#ifdef CONFIG_HIGHMEM + zones_size[ZONE_HIGHMEM] = 0; +#endif + free_area_init(zones_size); + } +} + +void mem_init(void) +{ + int codek = 0, datak = 0, initk = 0; + /* DAVIDM look at setup memory map generically with reserved area */ + unsigned long tmp; + extern char _etext, _stext, _sdata, _ebss, __init_begin, __init_end; + extern unsigned long _ramend, _ramstart; + unsigned long len = &_ramend - &_ramstart; + unsigned long start_mem = memory_start; /* DAVIDM - these must start at end of kernel */ + unsigned long end_mem = memory_end; /* DAVIDM - this must not include kernel stack at top */ + +#ifdef DEBUG + printk(KERN_DEBUG "Mem_init: start=%lx, end=%lx\n", start_mem, end_mem); +#endif + + end_mem &= PAGE_MASK; + high_memory = (void *) end_mem; + + start_mem = PAGE_ALIGN(start_mem); + max_mapnr = num_physpages = MAP_NR(high_memory); + + /* this will put all memory onto the freelists */ + totalram_pages = free_all_bootmem(); + + codek = (&_etext - &_stext) >> 10; + datak = (&_ebss - &_sdata) >> 10; + initk = (&__init_begin - &__init_end) >> 10; + + tmp = nr_free_pages() << PAGE_SHIFT; + printk(KERN_INFO "Memory available: %luk/%luk RAM, %luk/%luk ROM (%dk kernel code, %dk data)\n", + tmp >> 10, + len >> 10, + (rom_length > 0) ? ((rom_length >> 10) - codek) : 0, + rom_length >> 10, + codek, + datak + ); +} + + +#ifdef CONFIG_BLK_DEV_INITRD +void free_initrd_mem(unsigned long start, unsigned long end) +{ + int pages = 0; + for (; start < end; start += PAGE_SIZE) { + ClearPageReserved(virt_to_page(start)); + set_page_count(virt_to_page(start), 1); + free_page(start); + totalram_pages++; + pages++; + } + printk ("Freeing initrd memory: %dk freed\n", pages); +} +#endif + +void +free_initmem() +{ +#ifdef CONFIG_RAMKERNEL + unsigned long addr; + extern char __init_begin, __init_end; +/* + * the following code should be cool even if these sections + * are not page aligned. + */ + addr = PAGE_ALIGN((unsigned long)(&__init_begin)); + /* next to check that the page we free is not a partial page */ + for (; addr + PAGE_SIZE < (unsigned long)(&__init_end); addr +=PAGE_SIZE) { + ClearPageReserved(virt_to_page(addr)); + set_page_count(virt_to_page(addr), 1); + free_page(addr); + totalram_pages++; + } + printk(KERN_INFO "Freeing unused kernel memory: %ldk freed (0x%x - 0x%x)\n", + (addr - PAGE_ALIGN((long) &__init_begin)) >> 10, + (int)(PAGE_ALIGN((unsigned long)(&__init_begin))), + (int)(addr - PAGE_SIZE)); +#endif +} + diff --git a/arch/h8300/mm/kmap.c b/arch/h8300/mm/kmap.c new file mode 100644 index 00000000000..4101ab54fc1 --- /dev/null +++ b/arch/h8300/mm/kmap.c @@ -0,0 +1,59 @@ +/* + * linux/arch/h8300/mm/kmap.c + * + * Based on + * linux/arch/m68knommu/mm/kmap.c + * + * Copyright (C) 2000 Lineo, <davidm@snapgear.com> + * Copyright (C) 2000-2002 David McCullough <davidm@snapgear.com> + */ + +#include <linux/config.h> +#include <linux/mm.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> + +#include <asm/setup.h> +#include <asm/segment.h> +#include <asm/page.h> +#include <asm/pgalloc.h> +#include <asm/io.h> +#include <asm/system.h> + +#undef DEBUG + +/* + * Map some physical address range into the kernel address space. + */ +void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag) +{ + return (void *)physaddr; +} + +/* + * Unmap a ioremap()ed region again. + */ +void iounmap(void *addr) +{ +} + +/* + * __iounmap unmaps nearly everything, so be careful + * it doesn't free currently pointer/page tables anymore but it + * wans't used anyway and might be added later. + */ +void __iounmap(void *addr, unsigned long size) +{ +} + +/* + * Set new cache mode for some kernel address space. + * The caller must push data for that range itself, if such data may already + * be in the cache. + */ +void kernel_set_cachemode(void *addr, unsigned long size, int cmode) +{ +} diff --git a/arch/h8300/mm/memory.c b/arch/h8300/mm/memory.c new file mode 100644 index 00000000000..f4ddece3216 --- /dev/null +++ b/arch/h8300/mm/memory.c @@ -0,0 +1,70 @@ +/* + * linux/arch/h8300/mm/memory.c + * + * Copyright (C) 2002 Yoshinori Sato <ysato@users.sourceforge.jp>, + * + * Based on: + * + * linux/arch/m68knommu/mm/memory.c + * + * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>, + * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com) + * + * Based on: + * + * linux/arch/m68k/mm/memory.c + * + * Copyright (C) 1995 Hamish Macdonald + */ + +#include <linux/config.h> +#include <linux/mm.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/slab.h> + +#include <asm/setup.h> +#include <asm/segment.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/system.h> +#include <asm/traps.h> +#include <asm/io.h> + +void cache_clear (unsigned long paddr, int len) +{ +} + + +void cache_push (unsigned long paddr, int len) +{ +} + +void cache_push_v (unsigned long vaddr, int len) +{ +} + +/* Map some physical address range into the kernel address space. The + * code is copied and adapted from map_chunk(). + */ + +unsigned long kernel_map(unsigned long paddr, unsigned long size, + int nocacheflag, unsigned long *memavailp ) +{ + return paddr; +} + +#ifdef MAGIC_ROM_PTR + +int is_in_rom(unsigned long addr) +{ + /* Anything not in operational RAM is returned as in rom! */ + if (addr < _ramstart || addr >= _ramend) + return 1; + else + return 0; +} + +#endif + diff --git a/arch/h8300/platform/h8300h/Makefile b/arch/h8300/platform/h8300h/Makefile new file mode 100644 index 00000000000..5d42c772f75 --- /dev/null +++ b/arch/h8300/platform/h8300h/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the linux kernel. +# +# Reuse any files we can from the H8/300H +# + +obj-y := entry.o ints_h8300h.o ptrace_h8300h.o diff --git a/arch/h8300/platform/h8300h/aki3068net/Makefile b/arch/h8300/platform/h8300h/aki3068net/Makefile new file mode 100644 index 00000000000..b03c328f8c7 --- /dev/null +++ b/arch/h8300/platform/h8300h/aki3068net/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the linux kernel. +# + +extra-y := crt0_ram.o +obj-y := timer.o diff --git a/arch/h8300/platform/h8300h/aki3068net/crt0_ram.S b/arch/h8300/platform/h8300h/aki3068net/crt0_ram.S new file mode 100644 index 00000000000..31c3703d8d6 --- /dev/null +++ b/arch/h8300/platform/h8300h/aki3068net/crt0_ram.S @@ -0,0 +1,111 @@ +/* + * linux/arch/h8300/platform/h8300h/aki3068net/crt0_ram.S + * + * Yoshinori Sato <ysato@users.sourceforge.jp> + * + * Platform depend startup + * Target Archtecture: AE-3068 (aka. aki3068net) + * Memory Layout : RAM + */ + +#define ASSEMBLY + +#include <linux/config.h> +#include <asm/linkage.h> + +#if !defined(CONFIG_BLKDEV_RESERVE) +#if defined(CONFIG_GDB_DEBUG) +#define RAMEND (__ramend - 0xc000) +#else +#define RAMEND __ramend +#endif +#else +#define RAMEND CONFIG_BLKDEV_RESERVE_ADDRESS +#endif + + .global SYMBOL_NAME(_start) + .global SYMBOL_NAME(command_line) + .global SYMBOL_NAME(_platform_gpio_table) + .global SYMBOL_NAME(_target_name) + + .h8300h + + .section .text + .file "crt0_ram.S" + + /* CPU Reset entry */ +SYMBOL_NAME_LABEL(_start) + mov.l #RAMEND,sp + ldc #0x80,ccr + + /* Peripheral Setup */ + +#if defined(CONFIG_MTD_UCLINUX) + /* move romfs image */ + jsr @__move_romfs +#endif + + /* .bss clear */ + mov.l #__sbss,er5 + mov.l #__ebss,er4 + sub.l er5,er4 + shlr er4 + shlr er4 + sub.l er0,er0 +1: + mov.l er0,@er5 + adds #4,er5 + dec.l #1,er4 + bne 1b + + /* copy kernel commandline */ + mov.l #COMMAND_START,er5 + mov.l #SYMBOL_NAME(command_line),er6 + mov.w #512,r4 + eepmov.w + + /* uClinux kernel start */ + ldc #0x90,ccr /* running kernel */ + mov.l #SYMBOL_NAME(init_thread_union),sp + add.l #0x2000,sp + jsr @_start_kernel +_exit: + + jmp _exit + + rts + + /* I/O port assign information */ +__platform_gpio_table: + mov.l #gpio_table,er0 + rts + +gpio_table: + ;; P1DDR + .byte 0xff,0xff + ;; P2DDR + .byte 0xff,0xff + ;; P3DDR + .byte 0xff,0x00 + ;; P4DDR + .byte 0x00,0x00 + ;; P5DDR + .byte 0x01,0x01 + ;; P6DDR + .byte 0x00,0x00 + ;; dummy + .byte 0x00,0x00 + ;; P8DDR + .byte 0x0c,0x0c + ;; P9DDR + .byte 0x00,0x00 + ;; PADDR + .byte 0x00,0x00 + ;; PBDDR + .byte 0x30,0x30 + +__target_name: + .asciz "AE-3068" + + .section .bootvec,"ax" + jmp @SYMBOL_NAME(_start) diff --git a/arch/h8300/platform/h8300h/aki3068net/timer.c b/arch/h8300/platform/h8300h/aki3068net/timer.c new file mode 100644 index 00000000000..086efb1fd28 --- /dev/null +++ b/arch/h8300/platform/h8300h/aki3068net/timer.c @@ -0,0 +1,52 @@ +/* + * linux/arch/h8300/platform/h8300h/aki3068net/timer.c + * + * Yoshinori Sato <ysato@users.sourcefoge.jp> + * + * Platform depend Timer Handler + * + */ + +#include <linux/config.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/timex.h> + +#include <asm/segment.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/regs306x.h> + +#define CMFA 6 + +#define CMIEA 0x40 +#define CCLR_CMA 0x08 +#define CLK_DIV8192 0x03 + +#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8192 /* Timer input freq. */ + +void __init platform_timer_setup(irqreturn_t (*timer_int)(int, void *, struct pt_regs *)) +{ + /* setup 8bit timer ch2 */ + ctrl_outb(H8300_TIMER_FREQ / HZ, TCORA2); /* set interval */ + ctrl_outb(0x00, _8TCSR2); /* no output */ + request_irq(40, timer_int, 0, "timer", 0); + ctrl_outb(CMIEA|CCLR_CMA|CLK_DIV8192, _8TCR2); /* start count */ +} + +void platform_timer_eoi(void) +{ + *(volatile unsigned char *)_8TCSR2 &= ~(1 << CMFA); +} + +void platform_gettod(int *year, int *mon, int *day, int *hour, + int *min, int *sec) +{ + *year = *mon = *day = *hour = *min = *sec = 0; +} diff --git a/arch/h8300/platform/h8300h/entry.S b/arch/h8300/platform/h8300h/entry.S new file mode 100644 index 00000000000..2052dbb9483 --- /dev/null +++ b/arch/h8300/platform/h8300h/entry.S @@ -0,0 +1,333 @@ +/* -*- mode: asm -*- + * + * linux/arch/h8300/platform/h8300h/entry.S + * + * Yoshinori Sato <ysato@users.sourceforge.jp> + * David McCullough <davidm@snapgear.com> + * + */ + +/* + * entry.S + * include exception/interrupt gateway + * system call entry + */ + +#include <linux/sys.h> +#include <linux/config.h> +#include <asm/unistd.h> +#include <asm/setup.h> +#include <asm/segment.h> +#include <asm/linkage.h> +#include <asm/asm-offsets.h> +#include <asm/thread_info.h> +#include <asm/errno.h> + + .h8300h + +/* CPU context save/restore macros. */ + + .macro SAVE_ALL + mov.l er0,@-sp + + stc ccr,r0l /* check kernel mode */ + orc #0x10,ccr + btst #4,r0l + bne 5f + + mov.l sp,@SYMBOL_NAME(sw_usp) /* user mode */ + mov.l @sp,er0 + mov.l @SYMBOL_NAME(sw_ksp),sp + sub.l #(LRET-LORIG),sp /* allocate LORIG - LRET */ + mov.l er0,@-sp + mov.l er1,@-sp + mov.l @SYMBOL_NAME(sw_usp),er0 + mov.l @(8:16,er0),er1 /* copy the RET addr */ + mov.l er1,@(LRET-LER1:16,sp) + + mov.w e1,r1 /* e1 highbyte = ccr */ + and #0xef,r1h /* mask mode? flag */ + sub.w r0,r0 + mov.b r1h,r0l + mov.w r0,@(LCCR-LER1:16,sp) /* copy ccr */ + mov.l @(LORIG-LER1:16,sp),er0 + mov.l er0,@(LER0-LER1:16,sp) /* copy ER0 */ + bra 6f +5: + mov.l @sp,er0 /* kernel mode */ + subs #2,sp /* dummy ccr */ + mov.l er0,@-sp + mov.l er1,@-sp + mov.w @(LRET-LER1:16,sp),r1 /* copy old ccr */ + mov.b r1h,r1l + mov.b #0,r1h + mov.w r1,@(LCCR-LER1:16,sp) /* set ccr */ +6: + mov.l er2,@-sp + mov.l er3,@-sp + mov.l er6,@-sp /* syscall arg #6 */ + mov.l er5,@-sp /* syscall arg #5 */ + mov.l er4,@-sp /* syscall arg #4 */ + .endm + + .macro RESTORE_ALL + mov.l @sp+,er4 + mov.l @sp+,er5 + mov.l @sp+,er6 + mov.l @sp+,er3 + mov.l @sp+,er2 + mov.w @(LCCR-LER1:16,sp),r0 /* check kernel mode */ + btst #4,r0l + bne 7f + + orc #0x80,ccr + mov.l @SYMBOL_NAME(sw_usp),er0 + mov.l @(LER0-LER1:16,sp),er1 /* restore ER0 */ + mov.l er1,@er0 + mov.w @(LCCR-LER1:16,sp),r1 /* restore the RET addr */ + mov.b r1l,r1h + mov.b @(LRET+1-LER1:16,sp),r1l + mov.w r1,e1 + mov.w @(LRET+2-LER1:16,sp),r1 + mov.l er1,@(8:16,er0) + + mov.l @sp+,er1 + add.l #(LRET-LER1),sp /* remove LORIG - LRET */ + mov.l sp,@SYMBOL_NAME(sw_ksp) + mov.l er0,sp + bra 8f +7: + mov.l @sp+,er1 + adds #4,sp + adds #2,sp +8: + mov.l @sp+,er0 + adds #4,sp /* remove the sw created LVEC */ + rte + .endm + +.globl SYMBOL_NAME(system_call) +.globl SYMBOL_NAME(ret_from_exception) +.globl SYMBOL_NAME(ret_from_fork) +.globl SYMBOL_NAME(ret_from_interrupt) +.globl SYMBOL_NAME(interrupt_redirect_table) +.globl SYMBOL_NAME(sw_ksp),SYMBOL_NAME(sw_usp) +.globl SYMBOL_NAME(resume) +.globl SYMBOL_NAME(interrupt_redirect_table) +.globl SYMBOL_NAME(interrupt_entry) +.globl SYMBOL_NAME(system_call) +.globl SYMBOL_NAME(trace_break) + +#if defined(CONFIG_ROMKERNEL) +INTERRUPTS = 64 + .section .int_redirect,"ax" +SYMBOL_NAME_LABEL(interrupt_redirect_table) + .rept 7 + .long 0 + .endr + jsr @SYMBOL_NAME(interrupt_entry) /* NMI */ + jmp @SYMBOL_NAME(system_call) /* TRAPA #0 (System call) */ + .long 0 + .long 0 + jmp @SYMBOL_NAME(trace_break) /* TRAPA #3 (breakpoint) */ + .rept INTERRUPTS-12 + jsr @SYMBOL_NAME(interrupt_entry) + .endr +#endif +#if defined(CONFIG_RAMKERNEL) +.globl SYMBOL_NAME(interrupt_redirect_table) + .section .bss +SYMBOL_NAME_LABEL(interrupt_redirect_table) + .space 4 +#endif + + .section .text + .align 2 +SYMBOL_NAME_LABEL(interrupt_entry) + SAVE_ALL + mov.w @(LCCR,sp),r0 + btst #4,r0l + bne 1f + mov.l @SYMBOL_NAME(sw_usp),er0 + mov.l @(4:16,er0),er0 + bra 2f +1: + mov.l @(LVEC,sp),er0 +2: +#if defined(CONFIG_ROMKERNEL) + sub.l #SYMBOL_NAME(interrupt_redirect_table),er0 +#endif +#if defined(CONFIG_RAMKERNEL) + mov.l @SYMBOL_NAME(interrupt_redirect_table),er1 + sub.l er1,er0 +#endif + shlr.l er0 + shlr.l er0 + dec.l #1,er0 + mov.l sp,er1 + subs #4,er1 /* adjust ret_pc */ + jsr @SYMBOL_NAME(process_int) + mov.l @SYMBOL_NAME(irq_stat)+CPUSTAT_SOFTIRQ_PENDING,er0 + beq 1f + jsr @SYMBOL_NAME(do_softirq) +1: + jmp @SYMBOL_NAME(ret_from_interrupt) + +SYMBOL_NAME_LABEL(system_call) + subs #4,sp /* dummy LVEC */ + SAVE_ALL + mov.w @(LCCR:16,sp),r1 + bset #4,r1l + ldc r1l,ccr + mov.l er0,er4 + mov.l #-ENOSYS,er0 + mov.l er0,@(LER0:16,sp) + + /* save top of frame */ + mov.l sp,er0 + jsr @SYMBOL_NAME(set_esp0) + cmp.l #NR_syscalls,er4 + bcc SYMBOL_NAME(ret_from_exception):16 + shll.l er4 + shll.l er4 + mov.l #SYMBOL_NAME(sys_call_table),er0 + add.l er4,er0 + mov.l @er0,er4 + beq SYMBOL_NAME(ret_from_exception):16 + mov.l sp,er2 + and.w #0xe000,r2 + mov.b @((TASK_FLAGS+3-(TIF_SYSCALL_TRACE >> 3)):16,er2),r2l + btst #(TIF_SYSCALL_TRACE & 7),r2l + bne 1f + mov.l @(LER1:16,sp),er0 + mov.l @(LER2:16,sp),er1 + mov.l @(LER3:16,sp),er2 + jsr @er4 + mov.l er0,@(LER0:16,sp) /* save the return value */ +#if defined(CONFIG_SYSCALL_PRINT) + jsr @SYMBOL_NAME(syscall_print) +#endif + bra SYMBOL_NAME(ret_from_exception):8 +1: + jsr SYMBOL_NAME(syscall_trace) + mov.l @(LER1:16,sp),er0 + mov.l @(LER2:16,sp),er1 + mov.l @(LER3:16,sp),er2 + jsr @er4 + mov.l er0,@(LER0:16,sp) /* save the return value */ + jsr @SYMBOL_NAME(syscall_trace) + bra SYMBOL_NAME(ret_from_exception):8 + +SYMBOL_NAME_LABEL(ret_from_fork) + mov.l er2,er0 + jsr @SYMBOL_NAME(schedule_tail) + bra SYMBOL_NAME(ret_from_exception):8 + +SYMBOL_NAME_LABEL(reschedule) + /* save top of frame */ + mov.l sp,er0 + jsr @SYMBOL_NAME(set_esp0) + jsr @SYMBOL_NAME(schedule) + +SYMBOL_NAME_LABEL(ret_from_exception) +#if defined(CONFIG_PREEMPT) + orc #0x80,ccr +#endif +SYMBOL_NAME_LABEL(ret_from_interrupt) + mov.b @(LCCR+1:16,sp),r0l + btst #4,r0l /* check if returning to kernel */ + bne done:8 /* if so, skip resched, signals */ + andc #0x7f,ccr + mov.l sp,er4 + and.w #0xe000,r4 + mov.l @(TI_FLAGS:16,er4),er1 + and.l #_TIF_WORK_MASK,er1 + beq done:8 +1: + mov.l @(TI_FLAGS:16,er4),er1 + btst #TIF_NEED_RESCHED,r1l + bne SYMBOL_NAME(reschedule):16 + mov.l sp,er0 + subs #4,er0 /* adjust retpc */ + mov.l er2,er1 + jsr @SYMBOL_NAME(do_signal) +#if defined(CONFIG_PREEMPT) + bra done:8 /* userspace thoru */ +3: + btst #4,r0l + beq done:8 /* userspace thoru */ +4: + mov.l @(TI_PRE_COUNT:16,er4),er1 + bne done:8 + mov.l @(TI_FLAGS:16,er4),er1 + btst #TIF_NEED_RESCHED,r1l + beq done:8 + mov.b r0l,r0l + bpl done:8 /* interrupt off (exception path?) */ + mov.l #PREEMPT_ACTIVE,er1 + mov.l er1,@(TI_PRE_COUNT:16,er4) + andc #0x7f,ccr + jsr @SYMBOL_NAME(schedule) + sub.l er1,er1 + mov.l er1,@(TI_PRE_COUNT:16,er4) + orc #0x80,ccr + bra 4b:8 +#endif +done: + RESTORE_ALL /* Does RTE */ + +SYMBOL_NAME_LABEL(resume) + /* + * Beware - when entering resume, offset of tss is in d1, + * prev (the current task) is in a0, next (the new task) + * is in a1 and d2.b is non-zero if the mm structure is + * shared between the tasks, so don't change these + * registers until their contents are no longer needed. + */ + + /* save sr */ + sub.w r3,r3 + stc ccr,r3l + mov.w r3,@(THREAD_CCR+2:16,er0) + + /* disable interrupts */ + orc #0x80,ccr + mov.l @SYMBOL_NAME(sw_usp),er3 + mov.l er3,@(THREAD_USP:16,er0) + mov.l sp,@(THREAD_KSP:16,er0) + + /* Skip address space switching if they are the same. */ + /* FIXME: what did we hack out of here, this does nothing! */ + + mov.l @(THREAD_USP:16,er1),er0 + mov.l er0,@SYMBOL_NAME(sw_usp) + mov.l @(THREAD_KSP:16,er1),sp + + /* restore status register */ + mov.w @(THREAD_CCR+2:16,er1),r3 + + ldc r3l,ccr + rts + +SYMBOL_NAME_LABEL(trace_break) + subs #4,sp + SAVE_ALL + sub.l er1,er1 + dec.l #1,er1 + mov.l er1,@(LORIG,sp) + mov.l sp,er0 + jsr @SYMBOL_NAME(set_esp0) + mov.l @SYMBOL_NAME(sw_usp),er0 + mov.l @er0,er1 + subs #2,er1 + mov.l er1,@er0 + and.w #0xff,e1 + mov.l er1,er0 + jsr @SYMBOL_NAME(trace_trap) + jmp @SYMBOL_NAME(ret_from_exception) + + .section .bss +SYMBOL_NAME_LABEL(sw_ksp) + .space 4 +SYMBOL_NAME_LABEL(sw_usp) + .space 4 diff --git a/arch/h8300/platform/h8300h/generic/Makefile b/arch/h8300/platform/h8300h/generic/Makefile new file mode 100644 index 00000000000..b6ea7688a61 --- /dev/null +++ b/arch/h8300/platform/h8300h/generic/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the linux kernel. +# + +obj-y := timer.o +extra-y = crt0_$(MODEL).o diff --git a/arch/h8300/platform/h8300h/generic/crt0_ram.S b/arch/h8300/platform/h8300h/generic/crt0_ram.S new file mode 100644 index 00000000000..b735042a7c3 --- /dev/null +++ b/arch/h8300/platform/h8300h/generic/crt0_ram.S @@ -0,0 +1,108 @@ +/* + * linux/arch/h8300/platform/h8300h/generic/crt0_ram.S + * + * Yoshinori Sato <ysato@users.sourceforge.jp> + * + * Platform depend startup + * Target Archtecture: AE-3068 (aka. aki3068net) + * Memory Layout : RAM + */ + +#define ASSEMBLY + +#include <linux/config.h> +#include <asm/linkage.h> + +#if !defined(CONFIG_BLKDEV_RESERVE) +#if defined(CONFIG_GDB_DEBUG) +#define RAMEND (__ramend - 0xc000) +#else +#define RAMEND __ramend +#endif +#else +#define RAMEND CONFIG_BLKDEV_RESERVE_ADDRESS +#endif + + .global SYMBOL_NAME(_start) + .global SYMBOL_NAME(command_line) + .global SYMBOL_NAME(_platform_gpio_table) + .global SYMBOL_NAME(_target_name) + + .h8300h + + .section .text + .file "crt0_ram.S" + + /* CPU Reset entry */ +SYMBOL_NAME_LABEL(_start) + mov.l #RAMEND,sp + ldc #0x80,ccr + + /* Peripheral Setup */ + +#if defined(CONFIG_BLK_DEV_BLKMEM) + /* move romfs image */ + jsr @__move_romfs +#endif + + /* .bss clear */ + mov.l #__sbss,er5 + mov.l #__ebss,er4 + sub.l er5,er4 + shlr er4 + shlr er4 + sub.l er0,er0 +1: + mov.l er0,@er5 + adds #4,er5 + dec.l #1,er4 + bne 1b + + /* copy kernel commandline */ + mov.l #COMMAND_START,er5 + mov.l #SYMBOL_NAME(command_line),er6 + mov.w #512,r4 + eepmov.w + + /* uClinux kernel start */ + ldc #0x90,ccr /* running kernel */ + mov.l #SYMBOL_NAME(init_thread_union),sp + add.l #0x2000,sp + jsr @_start_kernel +_exit: + + jmp _exit + + rts + + /* I/O port assign information */ +__platform_gpio_table: + mov.l #gpio_table,er0 + rts + +gpio_table: + ;; P1DDR + .byte 0x00,0x00 + ;; P2DDR + .byte 0x00,0x00 + ;; P3DDR + .byte 0x00,0x00 + ;; P4DDR + .byte 0x00,0x00 + ;; P5DDR + .byte 0x00,0x00 + ;; P6DDR + .byte 0x00,0x00 + ;; dummy + .byte 0x00,0x00 + ;; P8DDR + .byte 0x00,0x00 + ;; P9DDR + .byte 0x00,0x00 + ;; PADDR + .byte 0x00,0x00 + ;; PBDDR + .byte 0x00,0x00 + +__target_name: + .asciz "generic" diff --git a/arch/h8300/platform/h8300h/generic/crt0_rom.S b/arch/h8300/platform/h8300h/generic/crt0_rom.S new file mode 100644 index 00000000000..2e32d8179db --- /dev/null +++ b/arch/h8300/platform/h8300h/generic/crt0_rom.S @@ -0,0 +1,123 @@ +/* + * linux/arch/h8300/platform/h8300h/generic/crt0_rom.S + * + * Yoshinori Sato <ysato@users.sourceforge.jp> + * + * Platform depend startup + * Target Archtecture: generic + * Memory Layout : ROM + */ + +#define ASSEMBLY + +#include <linux/config.h> +#include <asm/linkage.h> + + .global SYMBOL_NAME(_start) + .global SYMBOL_NAME(_command_line) + .global SYMBOL_NAME(_platform_gpio_table) + .global SYMBOL_NAME(_target_name) + + .h8300h + .section .text + .file "crt0_rom.S" + + /* CPU Reset entry */ +SYMBOL_NAME_LABEL(_start) + mov.l #__ramend,sp + ldc #0x80,ccr + + /* Peripheral Setup */ + + /* .bss clear */ + mov.l #__sbss,er5 + mov.l #__ebss,er4 + sub.l er5,er4 + shlr er4 + shlr er4 + sub.l er0,er0 +1: + mov.l er0,@er5 + adds #4,er5 + dec.l #1,er4 + bne 1b + + /* copy .data */ +#if !defined(CONFIG_H8300H_SIM) + /* copy .data */ + mov.l #__begin_data,er5 + mov.l #__sdata,er6 + mov.l #__edata,er4 + sub.l er6,er4 + shlr.l er4 + shlr.l er4 +1: + mov.l @er5+,er0 + mov.l er0,@er6 + adds #4,er6 + dec.l #1,er4 + bne 1b +#endif + + /* copy kernel commandline */ + mov.l #COMMAND_START,er5 + mov.l #SYMBOL_NAME(_command_line),er6 + mov.w #512,r4 + eepmov.w + + /* linux kernel start */ + ldc #0x90,ccr /* running kernel */ + mov.l #SYMBOL_NAME(init_thread_union),sp + add.l #0x2000,sp + jsr @_start_kernel +_exit: + + jmp _exit + + rts + + /* I/O port assign information */ +__platform_gpio_table: + mov.l #gpio_table,er0 + rts + +gpio_table: + ;; P1DDR + .byte 0x00,0x00 + ;; P2DDR + .byte 0x00,0x00 + ;; P3DDR + .byte 0x00,0x00 + ;; P4DDR + .byte 0x00,0x00 + ;; P5DDR + .byte 0x00,0x00 + ;; P6DDR + .byte 0x00,0x00 + ;; dummy + .byte 0x00,0x00 + ;; P8DDR + .byte 0x00,0x00 + ;; P9DDR + .byte 0x00,0x00 + ;; PADDR + .byte 0x00,0x00 + ;; PBDDR + .byte 0x00,0x00 + + .section .rodata +__target_name: + .asciz "generic" + + .section .bss +__command_line: + .space 512 + + /* interrupt vector */ + .section .vectors,"ax" + .long __start +vector = 1 + .rept 64-1 + .long _interrupt_redirect_table+vector*4 +vector = vector + 1 + .endr diff --git a/arch/h8300/platform/h8300h/generic/timer.c b/arch/h8300/platform/h8300h/generic/timer.c new file mode 100644 index 00000000000..6590f89e521 --- /dev/null +++ b/arch/h8300/platform/h8300h/generic/timer.c @@ -0,0 +1,96 @@ +/* + * linux/arch/h8300/platform/h8300h/generic/timer.c + * + * Yoshinori Sato <ysato@users.sourceforge.jp> + * + * Platform depend Timer Handler + * + */ + +#include <linux/config.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/interrupt.h> + +#include <asm/segment.h> +#include <asm/io.h> +#include <asm/irq.h> + +#include <linux/timex.h> + +#if defined(CONFIG_H83007) || defined(CONFIG_H83068) +#include <asm/regs306x.h> +#define CMFA 6 + +#define CMIEA 0x40 +#define CCLR_CMA 0x08 +#define CLK_DIV8192 0x03 + +#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8192 /* Timer input freq. */ + +void __init platform_timer_setup(irqreturn_t (*timer_int)(int, void *, struct pt_regs *)) +{ + /* setup 8bit timer ch2 */ + ctrl_outb(H8300_TIMER_FREQ / HZ, TCORA2); /* set interval */ + ctrl_outb(0x00, _8TCSR2); /* no output */ + request_irq(40, timer_int, 0, "timer", 0); + ctrl_outb(CMIEA|CCLR_CMA|CLK_DIV8192, _8TCR2); /* start count */ +} + +void platform_timer_eoi(void) +{ + *(volatile unsigned char *)_8TCSR2 &= ~(1 << CMFA); +} +#endif + +#if defined(CONFIG_H83002) || defined(CONFIG_H83048) +/* FIXME! */ +#define TSTR 0x00ffff60 +#define TSNC 0x00ffff61 +#define TMDR 0x00ffff62 +#define TFCR 0x00ffff63 +#define TOER 0x00ffff90 +#define TOCR 0x00ffff91 +/* ITU0 */ +#define TCR 0x00ffff64 +#define TIOR 0x00ffff65 +#define TIER 0x00ffff66 +#define TSR 0x00ffff67 +#define TCNT 0x00ffff68 +#define GRA 0x00ffff6a +#define GRB 0x00ffff6c + +#define CCLR_CMGRA 0x20 +#define CLK_DIV8 0x03 + +#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8 /* Timer input freq. */ + +void __init platform_timer_setup(irqreturn_t (*timer_int)(int, void *, struct pt_regs *)) +{ + *(unsigned short *)GRA= H8300_TIMER_FREQ / HZ; /* set interval */ + *(unsigned short *)TCNT=0; /* clear counter */ + ctrl_outb(0x80|CCLR_CMGRA|CLK_DIV8, TCR); /* set ITU0 clock */ + ctrl_outb(0x88, TIOR); /* no output */ + request_irq(26, timer_int, 0, "timer", 0); + ctrl_outb(0xf9, TIER); /* compare match GRA interrupt */ + ctrl_outb(ctrl_inb(TSNC) & ~0x01, TSNC); /* ITU0 async */ + ctrl_outb(ctrl_inb(TMDR) & ~0x01, TMDR); /* ITU0 normal mode */ + ctrl_outb(ctrl_inb(TSTR) | 0x01, TSTR); /* ITU0 Start */ + return 0; +} + +void platform_timer_eoi(void) +{ + ctrl_outb(ctrl_inb(TSR) & ~0x01,TSR); +} +#endif + +void platform_gettod(int *year, int *mon, int *day, int *hour, + int *min, int *sec) +{ + *year = *mon = *day = *hour = *min = *sec = 0; +} diff --git a/arch/h8300/platform/h8300h/h8max/Makefile b/arch/h8300/platform/h8300h/h8max/Makefile new file mode 100644 index 00000000000..b03c328f8c7 --- /dev/null +++ b/arch/h8300/platform/h8300h/h8max/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the linux kernel. +# + +extra-y := crt0_ram.o +obj-y := timer.o diff --git a/arch/h8300/platform/h8300h/h8max/crt0_ram.S b/arch/h8300/platform/h8300h/h8max/crt0_ram.S new file mode 100644 index 00000000000..a5c5a9156e0 --- /dev/null +++ b/arch/h8300/platform/h8300h/h8max/crt0_ram.S @@ -0,0 +1,111 @@ +/* + * linux/arch/h8300/platform/h8300h/h8max/crt0_ram.S + * + * Yoshinori Sato <ysato@users.sourceforge.jp> + * + * Platform depend startup + * Target Archtecture: H8MAX + * Memory Layout : RAM + */ + +#define ASSEMBLY + +#include <linux/config.h> +#include <asm/linkage.h> + +#if !defined(CONFIG_BLKDEV_RESERVE) +#if defined(CONFIG_GDB_DEBUG) +#define RAMEND (__ramend - 0xc000) +#else +#define RAMEND __ramend +#endif +#else +#define RAMEND CONFIG_BLKDEV_RESERVE_ADDRESS +#endif + + .global SYMBOL_NAME(_start) + .global SYMBOL_NAME(command_line) + .global SYMBOL_NAME(_platform_gpio_table) + .global SYMBOL_NAME(_target_name) + + .h8300h + + .section .text + .file "crt0_ram.S" + + /* CPU Reset entry */ +SYMBOL_NAME_LABEL(_start) + mov.l #RAMEND,sp + ldc #0x80,ccr + + /* Peripheral Setup */ + +#if defined(CONFIG_MTD_UCLINUX) + /* move romfs image */ + jsr @__move_romfs +#endif + + /* .bss clear */ + mov.l #__sbss,er5 + mov.l #__ebss,er4 + sub.l er5,er4 + shlr er4 + shlr er4 + sub.l er0,er0 +1: + mov.l er0,@er5 + adds #4,er5 + dec.l #1,er4 + bne 1b + + /* copy kernel commandline */ + mov.l #COMMAND_START,er5 + mov.l #SYMBOL_NAME(command_line),er6 + mov.w #512,r4 + eepmov.w + + /* uClinux kernel start */ + ldc #0x90,ccr /* running kernel */ + mov.l #SYMBOL_NAME(init_thread_union),sp + add.l #0x2000,sp + jsr @_start_kernel +_exit: + + jmp _exit + + rts + + /* I/O port assign information */ +__platform_gpio_table: + mov.l #gpio_table,er0 + rts + +gpio_table: + ;; P1DDR + .byte 0xff,0xff + ;; P2DDR + .byte 0xff,0xff + ;; P3DDR + .byte 0x00,0x00 + ;; P4DDR + .byte 0x00,0x00 + ;; P5DDR + .byte 0x01,0x01 + ;; P6DDR + .byte 0xf6,0xf6 + ;; dummy + .byte 0x00,0x00 + ;; P8DDR + .byte 0xee,0xee + ;; P9DDR + .byte 0x00,0x00 + ;; PADDR + .byte 0x00,0x00 + ;; PBDDR + .byte 0x30,0x30 + +__target_name: + .asciz "H8MAX" + + .section .bootvec,"ax" + jmp @SYMBOL_NAME(_start) diff --git a/arch/h8300/platform/h8300h/h8max/timer.c b/arch/h8300/platform/h8300h/h8max/timer.c new file mode 100644 index 00000000000..9ac9fa6691c --- /dev/null +++ b/arch/h8300/platform/h8300h/h8max/timer.c @@ -0,0 +1,53 @@ +/* + * linux/arch/h8300/platform/h8300h/h8max/timer.c + * + * Yoshinori Sato <ysato@users.sourcefoge.jp> + * + * Platform depend Timer Handler + * + */ + +#include <linux/config.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/timex.h> + +#include <asm/segment.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/regs306x.h> + +#define CMFA 6 + +#define CMIEA 0x40 +#define CCLR_CMA 0x08 +#define CLK_DIV8192 0x03 + +#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8192 /* Timer input freq. */ + +void __init platform_timer_setup(irqreturn_t (*timer_int)(int, void *, struct pt_regs *)) +{ + /* setup 8bit timer ch2 */ + ctrl_outb(H8300_TIMER_FREQ / HZ, TCORA2); /* set interval */ + ctrl_outb(0x00, _8TCSR2); /* no output */ + request_irq(40, timer_int, 0, "timer", 0); + ctrl_outb(CMIEA|CCLR_CMA|CLK_DIV8192, _8TCR2); /* start count */ +} + +void platform_timer_eoi(void) +{ + *(volatile unsigned char *)_8TCSR2 &= ~(1 << CMFA); +} + +void platform_gettod(int *year, int *mon, int *day, int *hour, + int *min, int *sec) +{ + *year = *mon = *day = *hour = *min = *sec = 0; +} + diff --git a/arch/h8300/platform/h8300h/ints_h8300h.c b/arch/h8300/platform/h8300h/ints_h8300h.c new file mode 100644 index 00000000000..86a15547916 --- /dev/null +++ b/arch/h8300/platform/h8300h/ints_h8300h.c @@ -0,0 +1,86 @@ +/* + * linux/arch/h8300/platform/h8300h/ints_h8300h.c + * Interrupt handling CPU variants + * + * Yoshinori Sato <ysato@users.sourceforge.jp> + * + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/errno.h> + +#include <asm/ptrace.h> +#include <asm/traps.h> +#include <asm/irq.h> +#include <asm/io.h> +#include <asm/gpio.h> +#include <asm/regs306x.h> + +/* saved vector list */ +const int __initdata h8300_saved_vectors[]={ +#if defined(CONFIG_GDB_DEBUG) + TRAP3_VEC, +#endif + -1 +}; + +/* trap entry table */ +const unsigned long __initdata h8300_trap_table[NR_TRAPS]={ + 0,0,0,0,0,0,0,0, + (unsigned long)system_call, /* TRAPA #0 */ + 0,0, + (unsigned long)trace_break, /* TRAPA #3 */ +}; + +int h8300_enable_irq_pin(unsigned int irq) +{ + int bitmask; + if (irq < EXT_IRQ0 || irq > EXT_IRQ5) + return 0; + + /* initialize IRQ pin */ + bitmask = 1 << (irq - EXT_IRQ0); + switch(irq) { + case EXT_IRQ0: + case EXT_IRQ1: + case EXT_IRQ2: + case EXT_IRQ3: + if (H8300_GPIO_RESERVE(H8300_GPIO_P8, bitmask) == 0) + return -EBUSY; + H8300_GPIO_DDR(H8300_GPIO_P8, bitmask, H8300_GPIO_INPUT); + break; + case EXT_IRQ4: + case EXT_IRQ5: + if (H8300_GPIO_RESERVE(H8300_GPIO_P9, bitmask) == 0) + return -EBUSY; + H8300_GPIO_DDR(H8300_GPIO_P9, bitmask, H8300_GPIO_INPUT); + break; + } + + return 0; +} + +void h8300_disable_irq_pin(unsigned int irq) +{ + int bitmask; + if (irq < EXT_IRQ0 || irq > EXT_IRQ5) + return; + + /* disable interrupt & release IRQ pin */ + bitmask = 1 << (irq - EXT_IRQ0); + switch(irq) { + case EXT_IRQ0: + case EXT_IRQ1: + case EXT_IRQ2: + case EXT_IRQ3: + *(volatile unsigned char *)IER &= ~bitmask; + H8300_GPIO_FREE(H8300_GPIO_P8, bitmask); + break ; + case EXT_IRQ4: + case EXT_IRQ5: + *(volatile unsigned char *)IER &= ~bitmask; + H8300_GPIO_FREE(H8300_GPIO_P9, bitmask); + break; + } +} diff --git a/arch/h8300/platform/h8300h/ptrace_h8300h.c b/arch/h8300/platform/h8300h/ptrace_h8300h.c new file mode 100644 index 00000000000..18e51a7167d --- /dev/null +++ b/arch/h8300/platform/h8300h/ptrace_h8300h.c @@ -0,0 +1,284 @@ +/* + * linux/arch/h8300/platform/h8300h/ptrace_h8300h.c + * ptrace cpu depend helper functions + * + * Yoshinori Sato <ysato@users.sourceforge.jp> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of + * this archive for more details. + */ + +#include <linux/linkage.h> +#include <linux/sched.h> +#include <asm/ptrace.h> + +#define CCR_MASK 0x6f /* mode/imask not set */ +#define BREAKINST 0x5730 /* trapa #3 */ + +/* Mapping from PT_xxx to the stack offset at which the register is + saved. Notice that usp has no stack-slot and needs to be treated + specially (see get_reg/put_reg below). */ +static const int h8300_register_offset[] = { + PT_REG(er1), PT_REG(er2), PT_REG(er3), PT_REG(er4), + PT_REG(er5), PT_REG(er6), PT_REG(er0), PT_REG(orig_er0), + PT_REG(ccr), PT_REG(pc) +}; + +/* read register */ +long h8300_get_reg(struct task_struct *task, int regno) +{ + switch (regno) { + case PT_USP: + return task->thread.usp + sizeof(long)*2; + case PT_CCR: + return *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]); + default: + return *(unsigned long *)(task->thread.esp0 + h8300_register_offset[regno]); + } +} + +/* write register */ +int h8300_put_reg(struct task_struct *task, int regno, unsigned long data) +{ + unsigned short oldccr; + switch (regno) { + case PT_USP: + task->thread.usp = data - sizeof(long)*2; + case PT_CCR: + oldccr = *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]); + oldccr &= ~CCR_MASK; + data &= CCR_MASK; + data |= oldccr; + *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]) = data; + break; + default: + *(unsigned long *)(task->thread.esp0 + h8300_register_offset[regno]) = data; + break; + } + return 0; +} + +/* disable singlestep */ +void h8300_disable_trace(struct task_struct *child) +{ + if((long)child->thread.breakinfo.addr != -1L) { + *child->thread.breakinfo.addr = child->thread.breakinfo.inst; + child->thread.breakinfo.addr = (unsigned short *)-1L; + } +} + +/* calculate next pc */ +enum jump_type {none, /* normal instruction */ + jabs, /* absolute address jump */ + ind, /* indirect address jump */ + ret, /* return to subrutine */ + reg, /* register indexed jump */ + relb, /* pc relative jump (byte offset) */ + relw, /* pc relative jump (word offset) */ + }; + +/* opcode decode table define + ptn: opcode pattern + msk: opcode bitmask + len: instruction length (<0 next table index) + jmp: jump operation mode */ +struct optable { + unsigned char bitpattern; + unsigned char bitmask; + signed char length; + signed char type; +} __attribute__((aligned(1),packed)); + +#define OPTABLE(ptn,msk,len,jmp) \ + { \ + .bitpattern = ptn, \ + .bitmask = msk, \ + .length = len, \ + .type = jmp, \ + } + +const static struct optable optable_0[] = { + OPTABLE(0x00,0xff, 1,none), /* 0x00 */ + OPTABLE(0x01,0xff,-1,none), /* 0x01 */ + OPTABLE(0x02,0xfe, 1,none), /* 0x02-0x03 */ + OPTABLE(0x04,0xee, 1,none), /* 0x04-0x05/0x14-0x15 */ + OPTABLE(0x06,0xfe, 1,none), /* 0x06-0x07 */ + OPTABLE(0x08,0xea, 1,none), /* 0x08-0x09/0x0c-0x0d/0x18-0x19/0x1c-0x1d */ + OPTABLE(0x0a,0xee, 1,none), /* 0x0a-0x0b/0x1a-0x1b */ + OPTABLE(0x0e,0xee, 1,none), /* 0x0e-0x0f/0x1e-0x1f */ + OPTABLE(0x10,0xfc, 1,none), /* 0x10-0x13 */ + OPTABLE(0x16,0xfe, 1,none), /* 0x16-0x17 */ + OPTABLE(0x20,0xe0, 1,none), /* 0x20-0x3f */ + OPTABLE(0x40,0xf0, 1,relb), /* 0x40-0x4f */ + OPTABLE(0x50,0xfc, 1,none), /* 0x50-0x53 */ + OPTABLE(0x54,0xfd, 1,ret ), /* 0x54/0x56 */ + OPTABLE(0x55,0xff, 1,relb), /* 0x55 */ + OPTABLE(0x57,0xff, 1,none), /* 0x57 */ + OPTABLE(0x58,0xfb, 2,relw), /* 0x58/0x5c */ + OPTABLE(0x59,0xfb, 1,reg ), /* 0x59/0x5b */ + OPTABLE(0x5a,0xfb, 2,jabs), /* 0x5a/0x5e */ + OPTABLE(0x5b,0xfb, 2,ind ), /* 0x5b/0x5f */ + OPTABLE(0x60,0xe8, 1,none), /* 0x60-0x67/0x70-0x77 */ + OPTABLE(0x68,0xfa, 1,none), /* 0x68-0x69/0x6c-0x6d */ + OPTABLE(0x6a,0xfe,-2,none), /* 0x6a-0x6b */ + OPTABLE(0x6e,0xfe, 2,none), /* 0x6e-0x6f */ + OPTABLE(0x78,0xff, 4,none), /* 0x78 */ + OPTABLE(0x79,0xff, 2,none), /* 0x79 */ + OPTABLE(0x7a,0xff, 3,none), /* 0x7a */ + OPTABLE(0x7b,0xff, 2,none), /* 0x7b */ + OPTABLE(0x7c,0xfc, 2,none), /* 0x7c-0x7f */ + OPTABLE(0x80,0x80, 1,none), /* 0x80-0xff */ +}; + +const static struct optable optable_1[] = { + OPTABLE(0x00,0xff,-3,none), /* 0x0100 */ + OPTABLE(0x40,0xf0,-3,none), /* 0x0140-0x14f */ + OPTABLE(0x80,0xf0, 1,none), /* 0x0180-0x018f */ + OPTABLE(0xc0,0xc0, 2,none), /* 0x01c0-0x01ff */ +}; + +const static struct optable optable_2[] = { + OPTABLE(0x00,0x20, 2,none), /* 0x6a0?/0x6a8?/0x6b0?/0x6b8? */ + OPTABLE(0x20,0x20, 3,none), /* 0x6a2?/0x6aa?/0x6b2?/0x6ba? */ +}; + +const static struct optable optable_3[] = { + OPTABLE(0x69,0xfb, 2,none), /* 0x010069/0x01006d/014069/0x01406d */ + OPTABLE(0x6b,0xff,-4,none), /* 0x01006b/0x01406b */ + OPTABLE(0x6f,0xff, 3,none), /* 0x01006f/0x01406f */ + OPTABLE(0x78,0xff, 5,none), /* 0x010078/0x014078 */ +}; + +const static struct optable optable_4[] = { + OPTABLE(0x00,0x78, 3,none), /* 0x0100690?/0x01006d0?/0140690/0x01406d0?/0x0100698?/0x01006d8?/0140698?/0x01406d8? */ + OPTABLE(0x20,0x78, 4,none), /* 0x0100692?/0x01006d2?/0140692/0x01406d2?/0x010069a?/0x01006da?/014069a?/0x01406da? */ +}; + +const static struct optables_list { + const struct optable *ptr; + int size; +} optables[] = { +#define OPTABLES(no) \ + { \ + .ptr = optable_##no, \ + .size = sizeof(optable_##no) / sizeof(struct optable), \ + } + OPTABLES(0), + OPTABLES(1), + OPTABLES(2), + OPTABLES(3), + OPTABLES(4), + +}; + +const unsigned char condmask[] = { + 0x00,0x40,0x01,0x04,0x02,0x08,0x10,0x20 +}; + +static int isbranch(struct task_struct *task,int reson) +{ + unsigned char cond = h8300_get_reg(task, PT_CCR); + /* encode complex conditions */ + /* B4: N^V + B5: Z|(N^V) + B6: C|Z */ + __asm__("bld #3,%w0\n\t" + "bxor #1,%w0\n\t" + "bst #4,%w0\n\t" + "bor #2,%w0\n\t" + "bst #5,%w0\n\t" + "bld #2,%w0\n\t" + "bor #0,%w0\n\t" + "bst #6,%w0\n\t" + :"=&r"(cond)::"cc"); + cond &= condmask[reson >> 1]; + if (!(reson & 1)) + return cond == 0; + else + return cond != 0; +} + +static unsigned short *getnextpc(struct task_struct *child, unsigned short *pc) +{ + const struct optable *op; + unsigned char *fetch_p; + unsigned char inst; + unsigned long addr; + unsigned long *sp; + int op_len,regno; + op = optables[0].ptr; + op_len = optables[0].size; + fetch_p = (unsigned char *)pc; + inst = *fetch_p++; + do { + if ((inst & op->bitmask) == op->bitpattern) { + if (op->length < 0) { + op = optables[-op->length].ptr; + op_len = optables[-op->length].size + 1; + inst = *fetch_p++; + } else { + switch (op->type) { + case none: + return pc + op->length; + case jabs: + addr = *(unsigned long *)pc; + return (unsigned short *)(addr & 0x00ffffff); + case ind: + addr = *pc & 0xff; + return (unsigned short *)(*(unsigned long *)addr); + case ret: + sp = (unsigned long *)h8300_get_reg(child, PT_USP); + /* user stack frames + | er0 | temporary saved + +--------+ + | exp | exception stack frames + +--------+ + | ret pc | userspace return address + */ + return (unsigned short *)(*(sp+2) & 0x00ffffff); + case reg: + regno = (*pc >> 4) & 0x07; + if (regno == 0) + addr = h8300_get_reg(child, PT_ER0); + else + addr = h8300_get_reg(child, regno-1+PT_ER1); + return (unsigned short *)addr; + case relb: + if ((inst = 0x55) || isbranch(child,inst & 0x0f)) + pc = (unsigned short *)((unsigned long)pc + + ((signed char)(*fetch_p))); + return pc+1; /* skip myself */ + case relw: + if ((inst = 0x5c) || isbranch(child,(*fetch_p & 0xf0) >> 4)) + pc = (unsigned short *)((unsigned long)pc + + ((signed short)(*(pc+1)))); + return pc+2; /* skip myself */ + } + } + } else + op++; + } while(--op_len > 0); + return NULL; +} + +/* Set breakpoint(s) to simulate a single step from the current PC. */ + +void h8300_enable_trace(struct task_struct *child) +{ + unsigned short *nextpc; + nextpc = getnextpc(child,(unsigned short *)h8300_get_reg(child, PT_PC)); + child->thread.breakinfo.addr = nextpc; + child->thread.breakinfo.inst = *nextpc; + *nextpc = BREAKINST; +} + +asmlinkage void trace_trap(unsigned long bp) +{ + if ((unsigned long)current->thread.breakinfo.addr == bp) { + h8300_disable_trace(current); + force_sig(SIGTRAP,current); + } else + force_sig(SIGILL,current); +} + diff --git a/arch/h8300/platform/h8s/Makefile b/arch/h8300/platform/h8s/Makefile new file mode 100644 index 00000000000..0847b15d425 --- /dev/null +++ b/arch/h8300/platform/h8s/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the linux kernel. +# +# Reuse any files we can from the H8S +# + +obj-y := entry.o ints_h8s.o ptrace_h8s.o diff --git a/arch/h8300/platform/h8s/edosk2674/Makefile b/arch/h8300/platform/h8s/edosk2674/Makefile new file mode 100644 index 00000000000..f763654ac6f --- /dev/null +++ b/arch/h8300/platform/h8s/edosk2674/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the linux kernel. +# + +extra-y := crt0_$(MODEL).o +obj-y := timer.o diff --git a/arch/h8300/platform/h8s/edosk2674/crt0_ram.S b/arch/h8300/platform/h8s/edosk2674/crt0_ram.S new file mode 100644 index 00000000000..8105dc17d73 --- /dev/null +++ b/arch/h8300/platform/h8s/edosk2674/crt0_ram.S @@ -0,0 +1,131 @@ +/* + * linux/arch/h8300/platform/h8s/edosk2674/crt0_ram.S + * + * Yoshinori Sato <ysato@users.sourceforge.jp> + * + * Platform depend startup + * Target Archtecture: EDOSK-2674 + * Memory Layout : RAM + */ + +#define ASSEMBLY + +#include <linux/config.h> +#include <asm/linkage.h> +#include <asm/regs267x.h> + +#if !defined(CONFIG_BLKDEV_RESERVE) +#if defined(CONFIG_GDB_DEBUG) +#define RAMEND (__ramend - 0xc000) +#else +#define RAMEND __ramend +#endif +#else +#define RAMEND CONFIG_BLKDEV_RESERVE_ADDRESS +#endif + + .global SYMBOL_NAME(_start) + .global SYMBOL_NAME(_command_line) + .global SYMBOL_NAME(_platform_gpio_table) + .global SYMBOL_NAME(_target_name) + + .h8300s + + .section .text + .file "crt0_ram.S" + + /* CPU Reset entry */ +SYMBOL_NAME_LABEL(_start) + mov.l #RAMEND,sp + ldc #0x80,ccr + ldc #0x00,exr + + /* Peripheral Setup */ + bclr #4,@INTCR:8 /* interrupt mode 2 */ + bset #5,@INTCR:8 + bclr #0,@IER+1:16 + bset #1,@ISCRL+1:16 /* IRQ0 Positive Edge */ + bclr #0,@ISCRL+1:16 + +#if defined(CONFIG_MTD_UCLINUX) + /* move romfs image */ + jsr @__move_romfs +#endif + + /* .bss clear */ + mov.l #__sbss,er5 + mov.l er5,er6 + mov.l #__ebss,er4 + sub.l er5,er4 + shlr #2,er4 + sub.l er0,er0 +1: + mov.l er0,@er5 + adds #4,er5 + dec.l #1,er4 + bne 1b + + /* copy kernel commandline */ + mov.l #COMMAND_START,er5 + mov.l #SYMBOL_NAME(command_line),er6 + mov.w #512,r4 + eepmov.w + + /* uClinux kernel start */ + ldc #0x90,ccr /* running kernel */ + mov.l #SYMBOL_NAME(init_thread_union),sp + add.l #0x2000,sp + jsr @_start_kernel +_exit: + + jmp _exit + + rts + + /* I/O port assign information */ +__platform_gpio_table: + mov.l #gpio_table,er0 + rts + +gpio_table: + ;; P1DDR + ;; used,ddr + .byte 0x00,0x00 + ;; P2DDR + .byte 0x00,0x00 + ;; P3DDR + .byte 0x3f,0x3a + ;; dummy + .byte 0x00,0x00 + ;; P5DDR + .byte 0x00,0x00 + ;; P6DDR + .byte 0x00,0x00 + ;; P7DDR + .byte 0x00,0x00 + ;; P8DDR + .byte 0x00,0x00 + ;; dummy + .byte 0x00,0x00 + ;; PADDR + .byte 0xff,0xff + ;; PBDDR + .byte 0xff,0x00 + ;; PCDDR + .byte 0xff,0x00 + ;; PDDDR + .byte 0xff,0x00 + ;; PEDDR + .byte 0xff,0x00 + ;; PFDDR + .byte 0xff,0xff + ;; PGDDR + .byte 0x0f,0x0f + ;; PHDDR + .byte 0x0f,0x0f + +__target_name: + .asciz "EDOSK-2674" + + .section .bootvec,"ax" + jmp @SYMBOL_NAME(_start) diff --git a/arch/h8300/platform/h8s/edosk2674/crt0_rom.S b/arch/h8300/platform/h8s/edosk2674/crt0_rom.S new file mode 100644 index 00000000000..65748bf1855 --- /dev/null +++ b/arch/h8300/platform/h8s/edosk2674/crt0_rom.S @@ -0,0 +1,187 @@ +/* + * linux/arch/h8300/platform/h8s/edosk2674/crt0_rom.S + * + * Yoshinori Sato <ysato@users.sourceforge.jp> + * + * Platform depend startup + * Target Archtecture: EDOSK-2674 + * Memory Layout : ROM + */ + +#define ASSEMBLY + +#include <linux/config.h> +#include <asm/linkage.h> +#include <asm/regs267x.h> + + .global SYMBOL_NAME(_start) + .global SYMBOL_NAME(_command_line) + .global SYMBOL_NAME(_platform_gpio_table) + .global SYMBOL_NAME(_target_name) + + .h8300s + .section .text + .file "crt0_rom.S" + + /* CPU Reset entry */ +SYMBOL_NAME_LABEL(_start) + mov.l #__ramend,sp + ldc #0x80,ccr + ldc #0,exr + + /* Peripheral Setup */ +;BSC/GPIO setup + mov.l #init_regs,er0 + mov.w #0xffff,e2 +1: + mov.w @er0+,r2 + beq 2f + mov.w @er0+,r1 + mov.b r1l,@er2 + bra 1b + +2: +;SDRAM setup +#define SDRAM_SMR 0x400040 + + mov.b #0,r0l + mov.b r0l,@DRACCR:16 + mov.w #0x188,r0 + mov.w r0,@REFCR:16 + mov.w #0x85b4,r0 + mov.w r0,@DRAMCR:16 + mov.b #0,r1l + mov.b r1l,@SDRAM_SMR + mov.w #0x84b4,r0 + mov.w r0,@DRAMCR:16 +;special thanks to Arizona Cooperative Power + + /* copy .data */ + mov.l #__begin_data,er5 + mov.l #__sdata,er6 + mov.l #__edata,er4 + sub.l er6,er4 + shlr.l #2,er4 +1: + mov.l @er5+,er0 + mov.l er0,@er6 + adds #4,er6 + dec.l #1,er4 + bne 1b + + /* .bss clear */ + mov.l #__sbss,er5 + mov.l #__ebss,er4 + sub.l er5,er4 + shlr.l #2,er4 + sub.l er0,er0 +1: + mov.l er0,@er5 + adds #4,er5 + dec.l #1,er4 + bne 1b + + /* copy kernel commandline */ + mov.l #COMMAND_START,er5 + mov.l #SYMBOL_NAME(_command_line),er6 + mov.w #512,r4 + eepmov.w + + /* linux kernel start */ + ldc #0x90,ccr /* running kernel */ + mov.l #SYMBOL_NAME(init_thread_union),sp + add.l #0x2000,sp + jsr @_start_kernel +_exit: + + jmp _exit + + rts + + /* I/O port assign information */ +__platform_gpio_table: + mov.l #gpio_table,er0 + rts + +#define INIT_REGS_DATA(REGS,DATA) \ + .word ((REGS) & 0xffff),DATA + +init_regs: +INIT_REGS_DATA(ASTCR,0xff) +INIT_REGS_DATA(RDNCR,0x00) +INIT_REGS_DATA(ABWCR,0x80) +INIT_REGS_DATA(WTCRAH,0x27) +INIT_REGS_DATA(WTCRAL,0x77) +INIT_REGS_DATA(WTCRBH,0x71) +INIT_REGS_DATA(WTCRBL,0x22) +INIT_REGS_DATA(CSACRH,0x80) +INIT_REGS_DATA(CSACRL,0x80) +INIT_REGS_DATA(BROMCRH,0xa0) +INIT_REGS_DATA(BROMCRL,0xa0) +INIT_REGS_DATA(P3DDR,0x3a) +INIT_REGS_DATA(P3ODR,0x06) +INIT_REGS_DATA(PADDR,0xff) +INIT_REGS_DATA(PFDDR,0xfe) +INIT_REGS_DATA(PGDDR,0x0f) +INIT_REGS_DATA(PHDDR,0x0f) +INIT_REGS_DATA(PFCR0,0xff) +INIT_REGS_DATA(PFCR2,0x0d) +INIT_REGS_DATA(ITSR, 0x00) +INIT_REGS_DATA(ITSR+1,0x3f) +INIT_REGS_DATA(INTCR,0x20) + + .word 0 + +gpio_table: + ;; P1DDR + .byte 0x00,0x00 + ;; P2DDR + .byte 0x00,0x00 + ;; P3DDR + .byte 0x00,0x00 + ;; dummy + .byte 0x00,0x00 + ;; P5DDR + .byte 0x00,0x00 + ;; P6DDR + .byte 0x00,0x00 + ;; P7DDR + .byte 0x00,0x00 + ;; P8DDR + .byte 0x00,0x00 + ;; dummy + .byte 0x00,0x00 + ;; PADDR + .byte 0x00,0x00 + ;; PBDDR + .byte 0x00,0x00 + ;; PCDDR + .byte 0x00,0x00 + ;; PDDDR + .byte 0x00,0x00 + ;; PEDDR + .byte 0x00,0x00 + ;; PFDDR + .byte 0x00,0x00 + ;; PGDDR + .byte 0x00,0x00 + ;; PHDDR + .byte 0x00,0x00 + + .section .rodata +__target_name: + .asciz "EDOSK-2674" + + .section .bss +__command_line: + .space 512 + + /* interrupt vector */ + .section .vectors,"ax" + .long __start + .long __start +vector = 2 + .rept 126 + .long _interrupt_redirect_table+vector*4 +vector = vector + 1 + .endr diff --git a/arch/h8300/platform/h8s/edosk2674/timer.c b/arch/h8300/platform/h8s/edosk2674/timer.c new file mode 100644 index 00000000000..9441a4f1631 --- /dev/null +++ b/arch/h8300/platform/h8s/edosk2674/timer.c @@ -0,0 +1,55 @@ +/* + * linux/arch/h8300/platform/h8s/edosk2674/timer.c + * + * Yoshinori Sato <ysato@users.sourceforge.jp> + * + * Platform depend Timer Handler + * + */ + +#include <linux/config.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/timex.h> + +#include <asm/segment.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/regs267x.h> + +#define CMFA 6 + +#define CMIEA 0x40 +#define CCLR_CMA 0x08 +#define CLK_DIV8192 0x03 + +#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8192 /* Timer input freq. */ + +void __init platform_timer_setup(irqreturn_t (*timer_int)(int, void *, struct pt_regs *)) +{ + /* 8bit timer module enabled */ + ctrl_outb(ctrl_inb(MSTPCRL) & ~0x01, MSTPCRL); + /* setup 8bit timer ch1 */ + ctrl_outb(H8300_TIMER_FREQ / HZ, _8TCORA1); /* set interval */ + ctrl_outb(0x00, _8TCSR1); /* no output */ + request_irq(76, timer_int, 0, "timer" ,0); + ctrl_outb(CMIEA|CCLR_CMA|CLK_DIV8192, _8TCR1); /* start count */ +} + +void platform_timer_eoi(void) +{ + *(volatile unsigned char *)_8TCSR1 &= ~(1 << CMFA); +} + +void platform_gettod(int *year, int *mon, int *day, int *hour, + int *min, int *sec) +{ +/* FIXME! not RTC support */ + *year = *mon = *day = *hour = *min = *sec = 0; +} diff --git a/arch/h8300/platform/h8s/entry.S b/arch/h8300/platform/h8s/entry.S new file mode 100644 index 00000000000..a7a53c84c80 --- /dev/null +++ b/arch/h8300/platform/h8s/entry.S @@ -0,0 +1,331 @@ +/* -*- mode: asm -*- + * + * linux/arch/h8300/platform/h8s/entry.S + * + * Yoshinori Sato <ysato@users.sourceforge.jp> + * + * fairly heavy changes to fix syscall args and signal processing + * by David McCullough <davidm@snapgear.com> + */ + +/* + * entry.S + * include exception/interrupt gateway + * system call entry + */ + +#include <linux/sys.h> +#include <linux/config.h> +#include <asm/unistd.h> +#include <asm/setup.h> +#include <asm/segment.h> +#include <asm/linkage.h> +#include <asm/asm-offsets.h> +#include <asm/thread_info.h> +#include <asm/errno.h> + + .h8300s + +/* CPU context save/restore macros. */ + + .macro SAVE_ALL + mov.l er0,@-sp + + stc ccr,r0l /* check kernel mode */ + orc #0x10,ccr + btst #4,r0l + bne 5f + + mov.l sp,@SYMBOL_NAME(sw_usp) /* user mode */ + mov.l @sp,er0 + mov.l @SYMBOL_NAME(sw_ksp),sp + sub.l #(LRET-LORIG),sp /* allocate LORIG - LRET */ + stm.l er0-er3,@-sp + mov.l @SYMBOL_NAME(sw_usp),er0 + mov.l @(10:16,er0),er1 /* copy the RET addr */ + mov.l er1,@(LRET-LER3:16,sp) + mov.w @(8:16,er0),r1 + mov.w r1,@(LEXR-LER3:16,sp) /* copy EXR */ + + mov.w e1,r1 /* e1 highbyte = ccr */ + and #0xef,r1h /* mask mode? flag */ + sub.w r0,r0 + mov.b r1h,r0l + mov.w r0,@(LCCR-LER3:16,sp) /* copy ccr */ + mov.l @(LORIG-LER3:16,sp),er0 + mov.l er0,@(LER0-LER3:16,sp) /* copy ER0 */ + bra 6f +5: + mov.l @sp,er0 /* kernel mode */ + subs #2,sp /* dummy ccr */ + stm.l er0-er3,@-sp + mov.w @(LRET-LER3:16,sp),r1 /* copy old ccr */ + mov.b r1h,r1l + mov.b #0,r1h + mov.w r1,@(LCCR-LER3:16,sp) +6: + mov.l er6,@-sp /* syscall arg #6 */ + mov.l er5,@-sp /* syscall arg #5 */ + mov.l er4,@-sp /* syscall arg #4 */ + .endm + + .macro RESTORE_ALL + mov.l @sp+,er4 + mov.l @sp+,er5 + mov.l @sp+,er6 + ldm.l @sp+,er2-er3 + mov.w @(LCCR-LER1:16,sp),r0 /* check kernel mode */ + btst #4,r0l + bne 7f + + orc #0x80,ccr + mov.l @SYMBOL_NAME(sw_usp),er0 + mov.l @(LER0-LER1:16,sp),er1 /* restore ER0 */ + mov.l er1,@er0 + mov.w @(LEXR-LER1:16,sp),r1 /* restore EXR */ + mov.b r1l,r1h + mov.w r1,@(8:16,er0) + mov.w @(LCCR-LER1:16,sp),r1 /* restore the RET addr */ + mov.b r1l,r1h + mov.b @(LRET+1-LER1:16,sp),r1l + mov.w r1,e1 + mov.w @(LRET+2-LER1:16,sp),r1 + mov.l er1,@(10:16,er0) + + mov.l @sp+,er1 + add.l #(LRET-LER1),sp /* remove LORIG - LRET */ + mov.l sp,@SYMBOL_NAME(sw_ksp) + mov.l er0,sp + bra 8f +7: + mov.l @sp+,er1 + adds #4,sp + adds #2,sp +8: + mov.l @sp+,er0 + adds #4,sp /* remove the sw created LVEC */ + rte + .endm + +.globl SYMBOL_NAME(system_call) +.globl SYMBOL_NAME(ret_from_exception) +.globl SYMBOL_NAME(ret_from_fork) +.globl SYMBOL_NAME(ret_from_interrupt) +.globl SYMBOL_NAME(interrupt_redirect_table) +.globl SYMBOL_NAME(sw_ksp),SYMBOL_NAME(sw_usp) +.globl SYMBOL_NAME(resume) +.globl SYMBOL_NAME(trace_break) +.globl SYMBOL_NAME(interrupt_entry) + +INTERRUPTS = 128 +#if defined(CONFIG_ROMKERNEL) + .section .int_redirect,"ax" +SYMBOL_NAME_LABEL(interrupt_redirect_table) + .rept 7 + .long 0 + .endr + jsr @SYMBOL_NAME(interrupt_entry) /* NMI */ + jmp @SYMBOL_NAME(system_call) /* TRAPA #0 (System call) */ + .long 0 + .long 0 + jmp @SYMBOL_NAME(trace_break) /* TRAPA #3 (breakpoint) */ + .rept INTERRUPTS-12 + jsr @SYMBOL_NAME(interrupt_entry) + .endr +#endif +#if defined(CONFIG_RAMKERNEL) +.globl SYMBOL_NAME(interrupt_redirect_table) + .section .bss +SYMBOL_NAME_LABEL(interrupt_redirect_table) + .space 4 +#endif + + .section .text + .align 2 +SYMBOL_NAME_LABEL(interrupt_entry) + SAVE_ALL + mov.w @(LCCR,sp),r0 + btst #4,r0l + bne 1f + mov.l @SYMBOL_NAME(sw_usp),er0 + mov.l @(4:16,er0),er0 + bra 2f +1: + mov.l @(LVEC:16,sp),er0 +2: +#if defined(CONFIG_ROMKERNEL) + sub.l #SYMBOL_NAME(interrupt_redirect_table),er0 +#endif +#if defined(CONFIG_RAMKERNEL) + mov.l @SYMBOL_NAME(interrupt_redirect_table),er1 + sub.l er1,er0 +#endif + shlr.l #2,er0 + dec.l #1,er0 + mov.l sp,er1 + subs #4,er1 /* adjust ret_pc */ + jsr @SYMBOL_NAME(process_int) + mov.l @SYMBOL_NAME(irq_stat)+CPUSTAT_SOFTIRQ_PENDING,er0 + beq 1f + jsr @SYMBOL_NAME(do_softirq) +1: + jmp @SYMBOL_NAME(ret_from_exception) + +SYMBOL_NAME_LABEL(system_call) + subs #4,sp /* dummy LVEC */ + SAVE_ALL + mov.w @(LCCR:16,sp),r1 + bset #4,r1l + ldc r1l,ccr /* restore ccr */ + mov.l er0,er4 + mov.l #-ENOSYS,er0 + mov.l er0,@(LER0:16,sp) + + /* save top of frame */ + mov.l sp,er0 + jsr @SYMBOL_NAME(set_esp0) + cmp.l #NR_syscalls,er4 + bcc SYMBOL_NAME(ret_from_exception):16 + shll.l #2,er4 + mov.l #SYMBOL_NAME(sys_call_table),er0 + add.l er4,er0 + mov.l @er0,er0 + mov.l er0,er4 + beq SYMBOL_NAME(ret_from_exception):16 + mov.l sp,er2 + and.w #0xe000,r2 + mov.b @((TASK_FLAGS+3-(TIF_SYSCALL_TRACE >> 3)):16,er2),r2l + btst #(TIF_SYSCALL_TRACE & 7),r2l + mov.l @(LER1:16,sp),er0 + mov.l @(LER2:16,sp),er1 + mov.l @(LER3:16,sp),er2 + jsr @er4 + mov.l er0,@(LER0:16,sp) /* save the return value */ +#if defined(CONFIG_SYSCALL_PRINT) + jsr @SYMBOL_NAME(syscall_print) +#endif + bra SYMBOL_NAME(ret_from_exception):8 +1: + jsr SYMBOL_NAME(syscall_trace) + mov.l @(LER1:16,sp),er0 + mov.l @(LER2:16,sp),er1 + mov.l @(LER3:16,sp),er2 + jsr @er4 + mov.l er0,@(LER0:16,sp) /* save the return value */ + jsr @SYMBOL_NAME(syscall_trace) + bra SYMBOL_NAME(ret_from_exception):8 + +SYMBOL_NAME_LABEL(ret_from_fork) + mov.l er2,er0 + jsr @SYMBOL_NAME(schedule_tail) + bra SYMBOL_NAME(ret_from_exception):8 + +SYMBOL_NAME_LABEL(reschedule) + /* save top of frame */ + mov.l sp,er0 + jsr @SYMBOL_NAME(set_esp0) + jsr @SYMBOL_NAME(schedule) + +SYMBOL_NAME_LABEL(ret_from_exception) +#if defined(CONFIG_PREEMPT) + orc #0x80,ccr +#endif +SYMBOL_NAME_LABEL(ret_from_interrupt) + mov.b @(LCCR+1:16,sp),r0l + btst #4,r0l /* check if returning to kernel */ + bne done:8 /* if so, skip resched, signals */ + andc #0x7f,ccr + mov.l sp,er4 + and.w #0xe000,r4 + mov.l @(TI_FLAGS:16,er4),er1 + and.l #_TIF_WORK_MASK,er1 + beq done:8 +1: + mov.l @(TI_FLAGS:16,er4),er1 + btst #TIF_NEED_RESCHED,r1l + bne SYMBOL_NAME(reschedule):16 + mov.l sp,er0 + subs #4,er0 /* adjust retpc */ + mov.l er2,er1 + jsr @SYMBOL_NAME(do_signal) +#if defined(CONFIG_PREEMPT) + bra done:8 /* userspace thoru */ +3: + btst #4,r0l + beq done:8 /* userspace thoru */ +4: + mov.l @(TI_PRE_COUNT:16,er4),er1 + bne done:8 + mov.l @(TI_FLAGS:16,er4),er1 + btst #TIF_NEED_RESCHED,r1l + beq done:8 + mov.b r0l,r0l + bpl done:8 /* interrupt off (exception path?) */ + mov.l #PREEMPT_ACTIVE,er1 + mov.l er1,@(TI_PRE_COUNT:16,er4) + andc #0x7f,ccr + jsr @SYMBOL_NAME(schedule) + sub.l er1,er1 + mov.l er1,@(TI_PRE_COUNT:16,er4) + orc #0x80,ccr + bra 4b:8 +#endif +done: + RESTORE_ALL /* Does RTE */ + +SYMBOL_NAME_LABEL(resume) + /* + * er0 = prev + * er1 = next + * return last in er2 + */ + + /* save sr */ + sub.w r3,r3 + stc ccr,r3l + stc exr,r3h + mov.w r3,@(THREAD_CCR+2:16,er0) + + /* disable interrupts */ + orc #0x80,ccr + mov.l @SYMBOL_NAME(sw_usp),er3 + mov.l er3,@(THREAD_USP:16,er0) + mov.l sp,@(THREAD_KSP:16,er0) + + /* Skip address space switching if they are the same. */ + /* FIXME: what did we hack out of here, this does nothing! */ + + mov.l @(THREAD_USP:16,er1),er0 + mov.l er0,@SYMBOL_NAME(sw_usp) + mov.l @(THREAD_KSP:16,er1),sp + + /* restore status register */ + mov.w @(THREAD_CCR+2:16,er1),r3 + + ldc r3l,ccr + ldc r3h,exr + + rts + +SYMBOL_NAME_LABEL(trace_break) + subs #4,sp /* dummy LVEC */ + SAVE_ALL + sub.l er1,er1 + dec.l #1,er1 + mov.l er1,@(LORIG,sp) + mov.l sp,er0 + jsr @SYMBOL_NAME(set_esp0) + mov.l @SYMBOL_NAME(sw_usp),er0 + mov.l @er0,er1 + subs #2,er1 + mov.l er1,@er0 + and.w #0xff,e1 + mov.l er1,er0 + jsr @SYMBOL_NAME(trace_trap) + jmp @SYMBOL_NAME(ret_from_exception) + + .section .bss +SYMBOL_NAME_LABEL(sw_ksp) + .space 4 +SYMBOL_NAME_LABEL(sw_usp) + .space 4 diff --git a/arch/h8300/platform/h8s/generic/Makefile b/arch/h8300/platform/h8s/generic/Makefile new file mode 100644 index 00000000000..055d53a9811 --- /dev/null +++ b/arch/h8300/platform/h8s/generic/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the linux kernel. +# + +extra-y = crt0_$(MODEL).o +obj-y := timer.o diff --git a/arch/h8300/platform/h8s/generic/crt0_ram.S b/arch/h8300/platform/h8s/generic/crt0_ram.S new file mode 100644 index 00000000000..86f45017846 --- /dev/null +++ b/arch/h8300/platform/h8s/generic/crt0_ram.S @@ -0,0 +1,128 @@ +/* + * linux/arch/h8300/platform/h8s/edosk2674/crt0_ram.S + * + * Yoshinori Sato <ysato@users.sourceforge.jp> + * + * Platform depend startup + * Target Archtecture: generic + * Memory Layout : RAM + */ + +#define ASSEMBLY + +#include <linux/config.h> +#include <asm/linkage.h> +#include <asm/regs267x.h> + +#if !defined(CONFIG_BLKDEV_RESERVE) +#if defined(CONFIG_GDB_DEBUG) +#define RAMEND (__ramend - 0xc000) +#else +#define RAMEND __ramend +#endif +#else +#define RAMEND CONFIG_BLKDEV_RESERVE_ADDRESS +#endif + + .global SYMBOL_NAME(_start) + .global SYMBOL_NAME(_command_line) + .global SYMBOL_NAME(_platform_gpio_table) + .global SYMBOL_NAME(_target_name) + + .h8300s + + .section .text + .file "crt0_ram.S" + + /* CPU Reset entry */ +SYMBOL_NAME_LABEL(_start) + mov.l #RAMEND,sp + ldc #0x80,ccr + ldc #0x00,exr + + /* Peripheral Setup */ + bclr #4,@INTCR:8 /* interrupt mode 2 */ + bset #5,@INTCR:8 + +#if defined(CONFIG_MTD_UCLINUX) + /* move romfs image */ + jsr @__move_romfs +#endif + + /* .bss clear */ + mov.l #__sbss,er5 + mov.l er5,er6 + mov.l #__ebss,er4 + sub.l er5,er4 + shlr #2,er4 + sub.l er0,er0 +1: + mov.l er0,@er5 + adds #4,er5 + dec.l #1,er4 + bne 1b + + /* copy kernel commandline */ + mov.l #COMMAND_START,er5 + mov.l #SYMBOL_NAME(command_line),er6 + mov.w #512,r4 + eepmov.w + + /* uClinux kernel start */ + ldc #0x90,ccr /* running kernel */ + mov.l #SYMBOL_NAME(init_thread_union),sp + add.l #0x2000,sp + jsr @_start_kernel +_exit: + + jmp _exit + + rts + + /* I/O port assign information */ +__platform_gpio_table: + mov.l #gpio_table,er0 + rts + +gpio_table: + ;; P1DDR + ;; used,ddr + .byte 0x00,0x00 + ;; P2DDR + .byte 0x00,0x00 + ;; P3DDR + .byte 0x00,0x00 + ;; dummy + .byte 0x00,0x00 + ;; P5DDR + .byte 0x00,0x00 + ;; P6DDR + .byte 0x00,0x00 + ;; P7DDR + .byte 0x00,0x00 + ;; P8DDR + .byte 0x00,0x00 + ;; dummy + .byte 0x00,0x00 + ;; PADDR + .byte 0x00,0x00 + ;; PBDDR + .byte 0x00,0x00 + ;; PCDDR + .byte 0x00,0x00 + ;; PDDDR + .byte 0x00,0x00 + ;; PEDDR + .byte 0x00,0x00 + ;; PFDDR + .byte 0x00,0x00 + ;; PGDDR + .byte 0x00,0x00 + ;; PHDDR + .byte 0x00,0x00 + +__target_name: + .asciz "generic" + + .section .bootvec,"ax" + jmp @SYMBOL_NAME(_start) diff --git a/arch/h8300/platform/h8s/generic/crt0_rom.S b/arch/h8300/platform/h8s/generic/crt0_rom.S new file mode 100644 index 00000000000..e18e4120228 --- /dev/null +++ b/arch/h8300/platform/h8s/generic/crt0_rom.S @@ -0,0 +1,129 @@ +/* + * linux/arch/h8300/platform/h8s/generic/crt0_rom.S + * + * Yoshinori Sato <ysato@users.sourceforge.jp> + * + * Platform depend startup + * Target Archtecture: generic + * Memory Layout : ROM + */ + +#define ASSEMBLY + +#include <linux/config.h> +#include <asm/linkage.h> +#include <asm/regs267x.h> + + .global SYMBOL_NAME(_start) + .global SYMBOL_NAME(_command_line) + .global SYMBOL_NAME(_platform_gpio_table) + .global SYMBOL_NAME(_target_name) + + .h8300s + .section .text + .file "crt0_rom.S" + + /* CPU Reset entry */ +SYMBOL_NAME_LABEL(_start) + mov.l #__ramend,sp + ldc #0x80,ccr + ldc #0,exr + bclr #4,@INTCR:8 + bset #5,@INTCR:8 /* Interrupt mode 2 */ + + /* Peripheral Setup */ + + /* copy .data */ +#if !defined(CONFIG_H8S_SIM) + mov.l #__begin_data,er5 + mov.l #__sdata,er6 + mov.l #__edata,er4 + sub.l er6,er4 + shlr.l #2,er4 +1: + mov.l @er5+,er0 + mov.l er0,@er6 + adds #4,er6 + dec.l #1,er4 + bne 1b +#endif + + /* .bss clear */ + mov.l #__sbss,er5 + mov.l #__ebss,er4 + sub.l er5,er4 + shlr.l #2,er4 + sub.l er0,er0 +1: + mov.l er0,@er5 + adds #4,er5 + dec.l #1,er4 + bne 1b + + /* linux kernel start */ + ldc #0x90,ccr /* running kernel */ + mov.l #SYMBOL_NAME(init_thread_union),sp + add.l #0x2000,sp + jsr @_start_kernel +_exit: + + jmp _exit + + rts + + /* I/O port assign information */ +__platform_gpio_table: + mov.l #gpio_table,er0 + rts + +gpio_table: + ;; P1DDR + .byte 0x00,0x00 + ;; P2DDR + .byte 0x00,0x00 + ;; P3DDR + .byte 0x00,0x00 + ;; P4DDR + .byte 0x00,0x00 + ;; P5DDR + .byte 0x00,0x00 + ;; P6DDR + .byte 0x00,0x00 + ;; dummy + .byte 0x00,0x00 + ;; P8DDR + .byte 0x00,0x00 + ;; PADDR + .byte 0x00,0x00 + ;; PBDDR + .byte 0x00,0x00 + ;; PCDDR + .byte 0x00,0x00 + ;; PDDDR + .byte 0x00,0x00 + ;; PEDDR + .byte 0x00,0x00 + ;; PFDDR + .byte 0x00,0x00 + ;; PGDDR + .byte 0x00,0x00 + ;; PHDDR + .byte 0x00,0x00 + + .section .rodata +__target_name: + .asciz "generic" + + .section .bss +__command_line: + .space 512 + + /* interrupt vector */ + .section .vectors,"ax" + .long __start + .long __start +vector = 2 + .rept 126-1 + .long _interrupt_redirect_table+vector*4 +vector = vector + 1 + .endr diff --git a/arch/h8300/platform/h8s/generic/timer.c b/arch/h8300/platform/h8s/generic/timer.c new file mode 100644 index 00000000000..633cd8e1c21 --- /dev/null +++ b/arch/h8300/platform/h8s/generic/timer.c @@ -0,0 +1,54 @@ +/* + * linux/arch/h8300/platform/h8s/generic/timer.c + * + * Yoshinori Sato <ysato@users.sourceforge.jp> + * + * Platform depend Timer Handler + * + */ + +#include <linux/config.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/timex.h> + +#include <asm/segment.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/regs267x.h> + +#define CMFA 6 + +#define CMIEA 0x40 +#define CCLR_CMA 0x08 +#define CLK_DIV8192 0x03 + +#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8192 /* Timer input freq. */ + +void __init platform_timer_setup(irqreturn_t (*timer_int)(int, void *, struct pt_regs *)) +{ + /* 8bit timer module enabled */ + ctrl_outb(ctrl_inb(MSTPCRL) & ~0x01, MSTPCRL); + /* setup 8bit timer ch1 */ + ctrl_outb(H8300_TIMER_FREQ / HZ, _8TCORA1); /* set interval */ + ctrl_outb(0x00, _8TCSR1); /* no output */ + request_irq(76, timer_int, 0, "timer" ,0); + ctrl_outb(CMIEA|CCLR_CMA|CLK_DIV8192, _8TCR1); /* start count */ +} + +void platform_timer_eoi(void) +{ + *(volatile unsigned char *)_8TCSR1 &= ~(1 << CMFA); +} + +void platform_gettod(int *year, int *mon, int *day, int *hour, + int *min, int *sec) +{ + *year = *mon = *day = *hour = *min = *sec = 0; +} diff --git a/arch/h8300/platform/h8s/ints.c b/arch/h8300/platform/h8s/ints.c new file mode 100644 index 00000000000..5441cdd12a3 --- /dev/null +++ b/arch/h8300/platform/h8s/ints.c @@ -0,0 +1,303 @@ +/* + * linux/arch/h8300/platform/h8s/ints.c + * + * Yoshinori Sato <ysato@users.sourceforge.jp> + * + * Based on linux/arch/$(ARCH)/platform/$(PLATFORM)/ints.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + * + * Copyright 1996 Roman Zippel + * Copyright 1999 D. Jeff Dionne <jeff@rt-control.com> + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/kernel_stat.h> +#include <linux/seq_file.h> +#include <linux/init.h> +#include <linux/bootmem.h> +#include <linux/random.h> +#include <linux/hardirq.h> + +#include <asm/system.h> +#include <asm/irq.h> +#include <asm/traps.h> +#include <asm/io.h> +#include <asm/setup.h> +#include <asm/gpio.h> +#include <asm/regs267x.h> +#include <asm/errno.h> + +/* + * This structure has only 4 elements for speed reasons + */ +typedef struct irq_handler { + irqreturn_t (*handler)(int, void *, struct pt_regs *); + int flags; + int count; + void *dev_id; + const char *devname; +} irq_handler_t; + +static irq_handler_t *irq_list[NR_IRQS]; + +/* IRQ pin assignment */ +struct irq_pins { + unsigned char port_no; + unsigned char bit_no; +}; +/* ISTR = 0 */ +const static struct irq_pins irq_assign_table0[16]={ + {H8300_GPIO_P5,H8300_GPIO_B0},{H8300_GPIO_P5,H8300_GPIO_B1}, + {H8300_GPIO_P5,H8300_GPIO_B2},{H8300_GPIO_P5,H8300_GPIO_B3}, + {H8300_GPIO_P5,H8300_GPIO_B4},{H8300_GPIO_P5,H8300_GPIO_B5}, + {H8300_GPIO_P5,H8300_GPIO_B6},{H8300_GPIO_P5,H8300_GPIO_B7}, + {H8300_GPIO_P6,H8300_GPIO_B0},{H8300_GPIO_P6,H8300_GPIO_B1}, + {H8300_GPIO_P6,H8300_GPIO_B2},{H8300_GPIO_P6,H8300_GPIO_B3}, + {H8300_GPIO_P6,H8300_GPIO_B4},{H8300_GPIO_P6,H8300_GPIO_B5}, + {H8300_GPIO_PF,H8300_GPIO_B1},{H8300_GPIO_PF,H8300_GPIO_B2}, +}; +/* ISTR = 1 */ +const static struct irq_pins irq_assign_table1[16]={ + {H8300_GPIO_P8,H8300_GPIO_B0},{H8300_GPIO_P8,H8300_GPIO_B1}, + {H8300_GPIO_P8,H8300_GPIO_B2},{H8300_GPIO_P8,H8300_GPIO_B3}, + {H8300_GPIO_P8,H8300_GPIO_B4},{H8300_GPIO_P8,H8300_GPIO_B5}, + {H8300_GPIO_PH,H8300_GPIO_B2},{H8300_GPIO_PH,H8300_GPIO_B3}, + {H8300_GPIO_P2,H8300_GPIO_B0},{H8300_GPIO_P2,H8300_GPIO_B1}, + {H8300_GPIO_P2,H8300_GPIO_B2},{H8300_GPIO_P2,H8300_GPIO_B3}, + {H8300_GPIO_P2,H8300_GPIO_B4},{H8300_GPIO_P2,H8300_GPIO_B5}, + {H8300_GPIO_P2,H8300_GPIO_B6},{H8300_GPIO_P2,H8300_GPIO_B7}, +}; + +static short use_kmalloc = 0; + +extern unsigned long *interrupt_redirect_table; + +#define CPU_VECTOR ((unsigned long *)0x000000) +#define ADDR_MASK (0xffffff) + +static inline unsigned long *get_vector_address(void) +{ + volatile unsigned long *rom_vector = CPU_VECTOR; + unsigned long base,tmp; + int vec_no; + + base = rom_vector[EXT_IRQ0] & ADDR_MASK; + + /* check romvector format */ + for (vec_no = EXT_IRQ1; vec_no <= EXT_IRQ15; vec_no++) { + if ((base+(vec_no - EXT_IRQ0)*4) != (rom_vector[vec_no] & ADDR_MASK)) + return NULL; + } + + /* ramvector base address */ + base -= EXT_IRQ0*4; + + /* writerble check */ + tmp = ~(*(unsigned long *)base); + (*(unsigned long *)base) = tmp; + if ((*(unsigned long *)base) != tmp) + return NULL; + return (unsigned long *)base; +} + +void __init init_IRQ(void) +{ +#if defined(CONFIG_RAMKERNEL) + int i; + unsigned long *ramvec,*ramvec_p; + unsigned long break_vec; + + ramvec = get_vector_address(); + if (ramvec == NULL) + panic("interrupt vector serup failed."); + else + printk("virtual vector at 0x%08lx\n",(unsigned long)ramvec); + +#if defined(CONFIG_GDB_DEBUG) + /* save orignal break vector */ + break_vec = ramvec[TRAP3_VEC]; +#else + break_vec = VECTOR(trace_break); +#endif + + /* create redirect table */ + for (ramvec_p = ramvec, i = 0; i < NR_IRQS; i++) + *ramvec_p++ = REDIRECT(interrupt_entry); + + /* set special vector */ + ramvec[TRAP0_VEC] = VECTOR(system_call); + ramvec[TRAP3_VEC] = break_vec; + interrupt_redirect_table = ramvec; +#ifdef DUMP_VECTOR + ramvec_p = ramvec; + for (i = 0; i < NR_IRQS; i++) { + if ((i % 8) == 0) + printk("\n%p: ",ramvec_p); + printk("%p ",*ramvec_p); + ramvec_p++; + } + printk("\n"); +#endif +#endif +} + +int request_irq(unsigned int irq, + irqreturn_t (*handler)(int, void *, struct pt_regs *), + unsigned long flags, const char *devname, void *dev_id) +{ + unsigned short ptn = 1 << (irq - EXT_IRQ0); + irq_handler_t *irq_handle; + if (irq < 0 || irq >= NR_IRQS) { + printk("Incorrect IRQ %d from %s\n", irq, devname); + return -EINVAL; + } + if (irq_list[irq]) + return -EBUSY; /* already used */ + if (irq >= EXT_IRQ0 && irq <= EXT_IRQ15) { + /* initialize IRQ pin */ + unsigned int port_no,bit_no; + if (*(volatile unsigned short *)ITSR & ptn) { + port_no = irq_assign_table1[irq - EXT_IRQ0].port_no; + bit_no = irq_assign_table1[irq - EXT_IRQ0].bit_no; + } else { + port_no = irq_assign_table0[irq - EXT_IRQ0].port_no; + bit_no = irq_assign_table0[irq - EXT_IRQ0].bit_no; + } + if (H8300_GPIO_RESERVE(port_no, bit_no) == 0) + return -EBUSY; /* pin already use */ + H8300_GPIO_DDR(port_no, bit_no, H8300_GPIO_INPUT); + *(volatile unsigned short *)ISR &= ~ptn; /* ISR clear */ + } + + if (use_kmalloc) + irq_handle = (irq_handler_t *)kmalloc(sizeof(irq_handler_t), GFP_ATOMIC); + else { + /* use bootmem allocater */ + irq_handle = (irq_handler_t *)alloc_bootmem(sizeof(irq_handler_t)); + irq_handle = (irq_handler_t *)((unsigned long)irq_handle | 0x80000000); + } + + if (irq_handle == NULL) + return -ENOMEM; + + irq_handle->handler = handler; + irq_handle->flags = flags; + irq_handle->count = 0; + irq_handle->dev_id = dev_id; + irq_handle->devname = devname; + irq_list[irq] = irq_handle; + if (irq_handle->flags & SA_SAMPLE_RANDOM) + rand_initialize_irq(irq); + + /* enable interrupt */ + /* compatible i386 */ + if (irq >= EXT_IRQ0 && irq <= EXT_IRQ15) + *(volatile unsigned short *)IER |= ptn; + return 0; +} + +EXPORT_SYMBOL(request_irq); + +void free_irq(unsigned int irq, void *dev_id) +{ + if (irq >= NR_IRQS) + return; + if (irq_list[irq]->dev_id != dev_id) + printk("%s: Removing probably wrong IRQ %d from %s\n", + __FUNCTION__, irq, irq_list[irq]->devname); + if (irq >= EXT_IRQ0 && irq <= EXT_IRQ15) { + /* disable interrupt & release IRQ pin */ + unsigned short port_no,bit_no; + *(volatile unsigned short *)ISR &= ~(1 << (irq - EXT_IRQ0)); + *(volatile unsigned short *)IER |= 1 << (irq - EXT_IRQ0); + if (*(volatile unsigned short *)ITSR & (1 << (irq - EXT_IRQ0))) { + port_no = irq_assign_table1[irq - EXT_IRQ0].port_no; + bit_no = irq_assign_table1[irq - EXT_IRQ0].bit_no; + } else { + port_no = irq_assign_table0[irq - EXT_IRQ0].port_no; + bit_no = irq_assign_table0[irq - EXT_IRQ0].bit_no; + } + H8300_GPIO_FREE(port_no, bit_no); + } + if (((unsigned long)irq_list[irq] & 0x80000000) == 0) { + kfree(irq_list[irq]); + irq_list[irq] = NULL; + } +} + +EXPORT_SYMBOL(free_irq); + +unsigned long probe_irq_on (void) +{ + return 0; +} + +EXPORT_SYMBOL(probe_irq_on); + +int probe_irq_off (unsigned long irqs) +{ + return 0; +} + +EXPORT_SYMBOL(probe_irq_off); + +void enable_irq(unsigned int irq) +{ + if (irq >= EXT_IRQ0 && irq <= EXT_IRQ15) + *(volatile unsigned short *)IER |= 1 << (irq - EXT_IRQ0); +} + +void disable_irq(unsigned int irq) +{ + if (irq >= EXT_IRQ0 && irq <= EXT_IRQ15) + *(volatile unsigned short *)IER &= ~(1 << (irq - EXT_IRQ0)); +} + +asmlinkage void process_int(unsigned long vec, struct pt_regs *fp) +{ + irq_enter(); + /* ISR clear */ + /* compatible i386 */ + if (vec >= EXT_IRQ0 && vec <= EXT_IRQ15) + *(volatile unsigned short *)ISR &= ~(1 << (vec - EXT_IRQ0)); + if (vec < NR_IRQS) { + if (irq_list[vec]) { + irq_list[vec]->handler(vec, irq_list[vec]->dev_id, fp); + irq_list[vec]->count++; + if (irq_list[vec]->flags & SA_SAMPLE_RANDOM) + add_interrupt_randomness(vec); + } + } else { + BUG(); + } + irq_exit(); +} + +int show_interrupts(struct seq_file *p, void *v) +{ + int i = *(loff_t *) v; + + if ((i < NR_IRQS) && (irq_list[i] !=NULL)) { + seq_printf(p, "%3d: %10u ",i,irq_list[i]->count); + seq_printf(p, "%s\n", irq_list[i]->devname); + } + + return 0; +} + +void init_irq_proc(void) +{ +} + +static int __init enable_kmalloc(void) +{ + use_kmalloc = 1; + return 0; +} +core_initcall(enable_kmalloc); diff --git a/arch/h8300/platform/h8s/ints_h8s.c b/arch/h8300/platform/h8s/ints_h8s.c new file mode 100644 index 00000000000..f53de493e3e --- /dev/null +++ b/arch/h8300/platform/h8s/ints_h8s.c @@ -0,0 +1,105 @@ +/* + * linux/arch/h8300/platform/h8s/ints_h8s.c + * Interrupt handling CPU variants + * + * Yoshinori Sato <ysato@users.sourceforge.jp> + * + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/kernel.h> + +#include <asm/ptrace.h> +#include <asm/traps.h> +#include <asm/irq.h> +#include <asm/io.h> +#include <asm/gpio.h> +#include <asm/regs267x.h> + +/* saved vector list */ +const int __initdata h8300_saved_vectors[]={ +#if defined(CONFIG_GDB_DEBUG) + TRACE_VEC, + TRAP3_VEC, +#endif + -1 +}; + +/* trap entry table */ +const unsigned long __initdata h8300_trap_table[NR_TRAPS]={ + 0,0,0,0,0, + (unsigned long)trace_break, /* TRACE */ + 0,0, + (unsigned long)system_call, /* TRAPA #0 */ + 0,0,0,0,0,0,0 +}; + +/* IRQ pin assignment */ +struct irq_pins { + unsigned char port_no; + unsigned char bit_no; +} __attribute__((aligned(1),packed)); +/* ISTR = 0 */ +const static struct irq_pins irq_assign_table0[16]={ + {H8300_GPIO_P5,H8300_GPIO_B0},{H8300_GPIO_P5,H8300_GPIO_B1}, + {H8300_GPIO_P5,H8300_GPIO_B2},{H8300_GPIO_P5,H8300_GPIO_B3}, + {H8300_GPIO_P5,H8300_GPIO_B4},{H8300_GPIO_P5,H8300_GPIO_B5}, + {H8300_GPIO_P5,H8300_GPIO_B6},{H8300_GPIO_P5,H8300_GPIO_B7}, + {H8300_GPIO_P6,H8300_GPIO_B0},{H8300_GPIO_P6,H8300_GPIO_B1}, + {H8300_GPIO_P6,H8300_GPIO_B2},{H8300_GPIO_P6,H8300_GPIO_B3}, + {H8300_GPIO_P6,H8300_GPIO_B4},{H8300_GPIO_P6,H8300_GPIO_B5}, + {H8300_GPIO_PF,H8300_GPIO_B1},{H8300_GPIO_PF,H8300_GPIO_B2}, +}; +/* ISTR = 1 */ +const static struct irq_pins irq_assign_table1[16]={ + {H8300_GPIO_P8,H8300_GPIO_B0},{H8300_GPIO_P8,H8300_GPIO_B1}, + {H8300_GPIO_P8,H8300_GPIO_B2},{H8300_GPIO_P8,H8300_GPIO_B3}, + {H8300_GPIO_P8,H8300_GPIO_B4},{H8300_GPIO_P8,H8300_GPIO_B5}, + {H8300_GPIO_PH,H8300_GPIO_B2},{H8300_GPIO_PH,H8300_GPIO_B3}, + {H8300_GPIO_P2,H8300_GPIO_B0},{H8300_GPIO_P2,H8300_GPIO_B1}, + {H8300_GPIO_P2,H8300_GPIO_B2},{H8300_GPIO_P2,H8300_GPIO_B3}, + {H8300_GPIO_P2,H8300_GPIO_B4},{H8300_GPIO_P2,H8300_GPIO_B5}, + {H8300_GPIO_P2,H8300_GPIO_B6},{H8300_GPIO_P2,H8300_GPIO_B7}, +}; + +/* IRQ to GPIO pinno transrate */ +#define IRQ_GPIO_MAP(irqbit,irq,port,bit) \ +do { \ + if (*(volatile unsigned short *)ITSR & irqbit) { \ + port = irq_assign_table1[irq - EXT_IRQ0].port_no; \ + bit = irq_assign_table1[irq - EXT_IRQ0].bit_no; \ + } else { \ + port = irq_assign_table0[irq - EXT_IRQ0].port_no; \ + bit = irq_assign_table0[irq - EXT_IRQ0].bit_no; \ + } \ +} while(0) + +int h8300_enable_irq_pin(unsigned int irq) +{ + if (irq >= EXT_IRQ0 && irq <= EXT_IRQ15) { + unsigned short ptn = 1 << (irq - EXT_IRQ0); + unsigned int port_no,bit_no; + IRQ_GPIO_MAP(ptn, irq, port_no, bit_no); + if (H8300_GPIO_RESERVE(port_no, bit_no) == 0) + return -EBUSY; /* pin already use */ + H8300_GPIO_DDR(port_no, bit_no, H8300_GPIO_INPUT); + *(volatile unsigned short *)ISR &= ~ptn; /* ISR clear */ + } + + return 0; +} + +void h8300_disable_irq_pin(unsigned int irq) +{ + if (irq >= EXT_IRQ0 && irq <= EXT_IRQ15) { + /* disable interrupt & release IRQ pin */ + unsigned short ptn = 1 << (irq - EXT_IRQ0); + unsigned short port_no,bit_no; + *(volatile unsigned short *)ISR &= ~ptn; + *(volatile unsigned short *)IER &= ~ptn; + IRQ_GPIO_MAP(ptn, irq, port_no, bit_no); + H8300_GPIO_FREE(port_no, bit_no); + } +} diff --git a/arch/h8300/platform/h8s/ptrace_h8s.c b/arch/h8300/platform/h8s/ptrace_h8s.c new file mode 100644 index 00000000000..e8cd46f9255 --- /dev/null +++ b/arch/h8300/platform/h8s/ptrace_h8s.c @@ -0,0 +1,84 @@ +/* + * linux/arch/h8300/platform/h8s/ptrace_h8s.c + * ptrace cpu depend helper functions + * + * Yoshinori Sato <ysato@users.sourceforge.jp> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of + * this archive for more details. + */ + +#include <linux/linkage.h> +#include <linux/sched.h> +#include <linux/errno.h> +#include <asm/ptrace.h> + +#define CCR_MASK 0x6f +#define EXR_TRACE 0x80 + +/* Mapping from PT_xxx to the stack offset at which the register is + saved. Notice that usp has no stack-slot and needs to be treated + specially (see get_reg/put_reg below). */ +static const int h8300_register_offset[] = { + PT_REG(er1), PT_REG(er2), PT_REG(er3), PT_REG(er4), + PT_REG(er5), PT_REG(er6), PT_REG(er0), PT_REG(orig_er0), + PT_REG(ccr), PT_REG(pc), 0, PT_REG(exr) +}; + +/* read register */ +long h8300_get_reg(struct task_struct *task, int regno) +{ + switch (regno) { + case PT_USP: + return task->thread.usp + sizeof(long)*2 + 2; + case PT_CCR: + case PT_EXR: + return *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]); + default: + return *(unsigned long *)(task->thread.esp0 + h8300_register_offset[regno]); + } +} + +/* write register */ +int h8300_put_reg(struct task_struct *task, int regno, unsigned long data) +{ + unsigned short oldccr; + switch (regno) { + case PT_USP: + task->thread.usp = data - sizeof(long)*2 - 2; + case PT_CCR: + oldccr = *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]); + oldccr &= ~CCR_MASK; + data &= CCR_MASK; + data |= oldccr; + *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]) = data; + break; + case PT_EXR: + /* exr modify not support */ + return -EIO; + default: + *(unsigned long *)(task->thread.esp0 + h8300_register_offset[regno]) = data; + break; + } + return 0; +} + +/* disable singlestep */ +void h8300_disable_trace(struct task_struct *child) +{ + *(unsigned short *)(child->thread.esp0 + h8300_register_offset[PT_EXR]) &= ~EXR_TRACE; +} + +/* enable singlestep */ +void h8300_enable_trace(struct task_struct *child) +{ + *(unsigned short *)(child->thread.esp0 + h8300_register_offset[PT_EXR]) |= EXR_TRACE; +} + +asmlinkage void trace_trap(unsigned long bp) +{ + (void)bp; + force_sig(SIGTRAP,current); +} + |