summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-davinci/board-da850-evm.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-davinci/board-da850-evm.c')
-rw-r--r--arch/arm/mach-davinci/board-da850-evm.c415
1 files changed, 415 insertions, 0 deletions
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
new file mode 100644
index 00000000000..c759d72494e
--- /dev/null
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -0,0 +1,415 @@
+/*
+ * TI DA850/OMAP-L138 EVM board
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Derived from: arch/arm/mach-davinci/board-da830-evm.c
+ * Original Copyrights follow:
+ *
+ * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/cp_intc.h>
+#include <mach/da8xx.h>
+#include <mach/nand.h>
+
+#define DA850_EVM_PHY_MASK 0x1
+#define DA850_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */
+
+#define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15)
+#define DA850_LCD_PWR_PIN GPIO_TO_PIN(8, 10)
+
+#define DA850_MMCSD_CD_PIN GPIO_TO_PIN(4, 0)
+#define DA850_MMCSD_WP_PIN GPIO_TO_PIN(4, 1)
+
+static struct mtd_partition da850_evm_norflash_partition[] = {
+ {
+ .name = "NOR filesystem",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ },
+};
+
+static struct physmap_flash_data da850_evm_norflash_data = {
+ .width = 2,
+ .parts = da850_evm_norflash_partition,
+ .nr_parts = ARRAY_SIZE(da850_evm_norflash_partition),
+};
+
+static struct resource da850_evm_norflash_resource[] = {
+ {
+ .start = DA8XX_AEMIF_CS2_BASE,
+ .end = DA8XX_AEMIF_CS2_BASE + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device da850_evm_norflash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &da850_evm_norflash_data,
+ },
+ .num_resources = 1,
+ .resource = da850_evm_norflash_resource,
+};
+
+/* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash
+ * (128K blocks). It may be used instead of the (default) SPI flash
+ * to boot, using TI's tools to install the secondary boot loader
+ * (UBL) and U-Boot.
+ */
+struct mtd_partition da850_evm_nandflash_partition[] = {
+ {
+ .name = "u-boot env",
+ .offset = 0,
+ .size = SZ_128K,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "UBL",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_128K,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "u-boot",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 4 * SZ_128K,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "kernel",
+ .offset = 0x200000,
+ .size = SZ_2M,
+ .mask_flags = 0,
+ },
+ {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ },
+};
+
+static struct davinci_nand_pdata da850_evm_nandflash_data = {
+ .parts = da850_evm_nandflash_partition,
+ .nr_parts = ARRAY_SIZE(da850_evm_nandflash_partition),
+ .ecc_mode = NAND_ECC_HW,
+ .options = NAND_USE_FLASH_BBT,
+};
+
+static struct resource da850_evm_nandflash_resource[] = {
+ {
+ .start = DA8XX_AEMIF_CS3_BASE,
+ .end = DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = DA8XX_AEMIF_CTL_BASE,
+ .end = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device da850_evm_nandflash_device = {
+ .name = "davinci_nand",
+ .id = 1,
+ .dev = {
+ .platform_data = &da850_evm_nandflash_data,
+ },
+ .num_resources = ARRAY_SIZE(da850_evm_nandflash_resource),
+ .resource = da850_evm_nandflash_resource,
+};
+
+static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("tlv320aic3x", 0x18),
+ }
+};
+
+static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
+ .bus_freq = 100, /* kHz */
+ .bus_delay = 0, /* usec */
+};
+
+static struct davinci_uart_config da850_evm_uart_config __initdata = {
+ .enabled_uarts = 0x7,
+};
+
+static struct platform_device *da850_evm_devices[] __initdata = {
+ &da850_evm_nandflash_device,
+ &da850_evm_norflash_device,
+};
+
+/* davinci da850 evm audio machine driver */
+static u8 da850_iis_serializer_direction[] = {
+ INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
+ INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
+ INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, TX_MODE,
+ RX_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
+};
+
+static struct snd_platform_data da850_evm_snd_data = {
+ .tx_dma_offset = 0x2000,
+ .rx_dma_offset = 0x2000,
+ .op_mode = DAVINCI_MCASP_IIS_MODE,
+ .num_serializer = ARRAY_SIZE(da850_iis_serializer_direction),
+ .tdm_slots = 2,
+ .serial_dir = da850_iis_serializer_direction,
+ .eventq_no = EVENTQ_1,
+ .version = MCASP_VERSION_2,
+ .txnumevt = 1,
+ .rxnumevt = 1,
+};
+
+static int da850_evm_mmc_get_ro(int index)
+{
+ return gpio_get_value(DA850_MMCSD_WP_PIN);
+}
+
+static int da850_evm_mmc_get_cd(int index)
+{
+ return !gpio_get_value(DA850_MMCSD_CD_PIN);
+}
+
+static struct davinci_mmc_config da850_mmc_config = {
+ .get_ro = da850_evm_mmc_get_ro,
+ .get_cd = da850_evm_mmc_get_cd,
+ .wires = 4,
+ .version = MMC_CTLR_VERSION_2,
+};
+
+static int da850_lcd_hw_init(void)
+{
+ int status;
+
+ status = gpio_request(DA850_LCD_BL_PIN, "lcd bl\n");
+ if (status < 0)
+ return status;
+
+ status = gpio_request(DA850_LCD_PWR_PIN, "lcd pwr\n");
+ if (status < 0) {
+ gpio_free(DA850_LCD_BL_PIN);
+ return status;
+ }
+
+ gpio_direction_output(DA850_LCD_BL_PIN, 0);
+ gpio_direction_output(DA850_LCD_PWR_PIN, 0);
+
+ /* disable lcd backlight */
+ gpio_set_value(DA850_LCD_BL_PIN, 0);
+
+ /* disable lcd power */
+ gpio_set_value(DA850_LCD_PWR_PIN, 0);
+
+ /* enable lcd power */
+ gpio_set_value(DA850_LCD_PWR_PIN, 1);
+
+ /* enable lcd backlight */
+ gpio_set_value(DA850_LCD_BL_PIN, 1);
+
+ return 0;
+}
+
+#define DA8XX_AEMIF_CE2CFG_OFFSET 0x10
+#define DA8XX_AEMIF_ASIZE_16BIT 0x1
+
+static void __init da850_evm_init_nor(void)
+{
+ void __iomem *aemif_addr;
+
+ aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K);
+
+ /* Configure data bus width of CS2 to 16 bit */
+ writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) |
+ DA8XX_AEMIF_ASIZE_16BIT,
+ aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET);
+
+ iounmap(aemif_addr);
+}
+
+#if defined(CONFIG_MTD_PHYSMAP) || \
+ defined(CONFIG_MTD_PHYSMAP_MODULE)
+#define HAS_NOR 1
+#else
+#define HAS_NOR 0
+#endif
+
+#if defined(CONFIG_MMC_DAVINCI) || \
+ defined(CONFIG_MMC_DAVINCI_MODULE)
+#define HAS_MMC 1
+#else
+#define HAS_MMC 0
+#endif
+
+static __init void da850_evm_init(void)
+{
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ int ret;
+
+ ret = da8xx_pinmux_setup(da850_nand_pins);
+ if (ret)
+ pr_warning("da850_evm_init: nand mux setup failed: %d\n",
+ ret);
+
+ ret = da8xx_pinmux_setup(da850_nor_pins);
+ if (ret)
+ pr_warning("da850_evm_init: nor mux setup failed: %d\n",
+ ret);
+
+ da850_evm_init_nor();
+
+ platform_add_devices(da850_evm_devices,
+ ARRAY_SIZE(da850_evm_devices));
+
+ ret = da8xx_register_edma();
+ if (ret)
+ pr_warning("da850_evm_init: edma registration failed: %d\n",
+ ret);
+
+ ret = da8xx_pinmux_setup(da850_i2c0_pins);
+ if (ret)
+ pr_warning("da850_evm_init: i2c0 mux setup failed: %d\n",
+ ret);
+
+ ret = da8xx_register_i2c(0, &da850_evm_i2c_0_pdata);
+ if (ret)
+ pr_warning("da850_evm_init: i2c0 registration failed: %d\n",
+ ret);
+
+ soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK;
+ soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY;
+ soc_info->emac_pdata->rmii_en = 0;
+
+ ret = da8xx_pinmux_setup(da850_cpgmac_pins);
+ if (ret)
+ pr_warning("da850_evm_init: cpgmac mux setup failed: %d\n",
+ ret);
+
+ ret = da8xx_register_emac();
+ if (ret)
+ pr_warning("da850_evm_init: emac registration failed: %d\n",
+ ret);
+
+ ret = da8xx_register_watchdog();
+ if (ret)
+ pr_warning("da830_evm_init: watchdog registration failed: %d\n",
+ ret);
+
+ if (HAS_MMC) {
+ if (HAS_NOR)
+ pr_warning("WARNING: both NOR Flash and MMC/SD are "
+ "enabled, but they share AEMIF pins.\n"
+ "\tDisable one of them.\n");
+
+ ret = da8xx_pinmux_setup(da850_mmcsd0_pins);
+ if (ret)
+ pr_warning("da850_evm_init: mmcsd0 mux setup failed:"
+ " %d\n", ret);
+
+ ret = gpio_request(DA850_MMCSD_CD_PIN, "MMC CD\n");
+ if (ret)
+ pr_warning("da850_evm_init: can not open GPIO %d\n",
+ DA850_MMCSD_CD_PIN);
+ gpio_direction_input(DA850_MMCSD_CD_PIN);
+
+ ret = gpio_request(DA850_MMCSD_WP_PIN, "MMC WP\n");
+ if (ret)
+ pr_warning("da850_evm_init: can not open GPIO %d\n",
+ DA850_MMCSD_WP_PIN);
+ gpio_direction_input(DA850_MMCSD_WP_PIN);
+
+ ret = da8xx_register_mmcsd0(&da850_mmc_config);
+ if (ret)
+ pr_warning("da850_evm_init: mmcsd0 registration failed:"
+ " %d\n", ret);
+ }
+
+ davinci_serial_init(&da850_evm_uart_config);
+
+ i2c_register_board_info(1, da850_evm_i2c_devices,
+ ARRAY_SIZE(da850_evm_i2c_devices));
+
+ /*
+ * shut down uart 0 and 1; they are not used on the board and
+ * accessing them causes endless "too much work in irq53" messages
+ * with arago fs
+ */
+ __raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30);
+ __raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30);
+
+ ret = da8xx_pinmux_setup(da850_mcasp_pins);
+ if (ret)
+ pr_warning("da850_evm_init: mcasp mux setup failed: %d\n",
+ ret);
+
+ da8xx_init_mcasp(0, &da850_evm_snd_data);
+
+ ret = da8xx_pinmux_setup(da850_lcdcntl_pins);
+ if (ret)
+ pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n",
+ ret);
+
+ ret = da850_lcd_hw_init();
+ if (ret)
+ pr_warning("da850_evm_init: lcd initialization failed: %d\n",
+ ret);
+
+ ret = da8xx_register_lcdc();
+ if (ret)
+ pr_warning("da850_evm_init: lcdc registration failed: %d\n",
+ ret);
+}
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+static int __init da850_evm_console_init(void)
+{
+ return add_preferred_console("ttyS", 2, "115200");
+}
+console_initcall(da850_evm_console_init);
+#endif
+
+static __init void da850_evm_irq_init(void)
+{
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+ cp_intc_init((void __iomem *)DA8XX_CP_INTC_VIRT, DA850_N_CP_INTC_IRQ,
+ soc_info->intc_irq_prios);
+}
+
+static void __init da850_evm_map_io(void)
+{
+ da850_init();
+}
+
+MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138 EVM")
+ .phys_io = IO_PHYS,
+ .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+ .boot_params = (DA8XX_DDR_BASE + 0x100),
+ .map_io = da850_evm_map_io,
+ .init_irq = da850_evm_irq_init,
+ .timer = &davinci_timer,
+ .init_machine = da850_evm_init,
+MACHINE_END