summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/aoe/mkshelf.sh6
-rw-r--r--Documentation/connector/cn_test.c194
-rw-r--r--Documentation/connector/connector.txt133
-rw-r--r--Documentation/fb/intel810.txt56
-rw-r--r--Documentation/firmware_class/firmware_sample_driver.c8
-rw-r--r--Documentation/input/appletouch.txt84
-rw-r--r--Documentation/kernel-parameters.txt9
-rw-r--r--Documentation/usb/proc_usb_info.txt13
-rw-r--r--Documentation/x86_64/boot-options.txt5
9 files changed, 471 insertions, 37 deletions
diff --git a/Documentation/aoe/mkshelf.sh b/Documentation/aoe/mkshelf.sh
index 8bacf9f2c7c..32615814271 100644
--- a/Documentation/aoe/mkshelf.sh
+++ b/Documentation/aoe/mkshelf.sh
@@ -8,13 +8,15 @@ fi
n_partitions=${n_partitions:-16}
dir=$1
shelf=$2
+nslots=16
+maxslot=`echo $nslots 1 - p | dc`
MAJOR=152
set -e
-minor=`echo 10 \* $shelf \* $n_partitions | bc`
+minor=`echo $nslots \* $shelf \* $n_partitions | bc`
endp=`echo $n_partitions - 1 | bc`
-for slot in `seq 0 9`; do
+for slot in `seq 0 $maxslot`; do
for part in `seq 0 $endp`; do
name=e$shelf.$slot
test "$part" != "0" && name=${name}p$part
diff --git a/Documentation/connector/cn_test.c b/Documentation/connector/cn_test.c
new file mode 100644
index 00000000000..b7de82e9c0e
--- /dev/null
+++ b/Documentation/connector/cn_test.c
@@ -0,0 +1,194 @@
+/*
+ * cn_test.c
+ *
+ * 2004-2005 Copyright (c) Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/skbuff.h>
+#include <linux/timer.h>
+
+#include "connector.h"
+
+static struct cb_id cn_test_id = { 0x123, 0x456 };
+static char cn_test_name[] = "cn_test";
+static struct sock *nls;
+static struct timer_list cn_test_timer;
+
+void cn_test_callback(void *data)
+{
+ struct cn_msg *msg = (struct cn_msg *)data;
+
+ printk("%s: %lu: idx=%x, val=%x, seq=%u, ack=%u, len=%d: %s.\n",
+ __func__, jiffies, msg->id.idx, msg->id.val,
+ msg->seq, msg->ack, msg->len, (char *)msg->data);
+}
+
+static int cn_test_want_notify(void)
+{
+ struct cn_ctl_msg *ctl;
+ struct cn_notify_req *req;
+ struct cn_msg *msg = NULL;
+ int size, size0;
+ struct sk_buff *skb;
+ struct nlmsghdr *nlh;
+ u32 group = 1;
+
+ size0 = sizeof(*msg) + sizeof(*ctl) + 3 * sizeof(*req);
+
+ size = NLMSG_SPACE(size0);
+
+ skb = alloc_skb(size, GFP_ATOMIC);
+ if (!skb) {
+ printk(KERN_ERR "Failed to allocate new skb with size=%u.\n",
+ size);
+
+ return -ENOMEM;
+ }
+
+ nlh = NLMSG_PUT(skb, 0, 0x123, NLMSG_DONE, size - sizeof(*nlh));
+
+ msg = (struct cn_msg *)NLMSG_DATA(nlh);
+
+ memset(msg, 0, size0);
+
+ msg->id.idx = -1;
+ msg->id.val = -1;
+ msg->seq = 0x123;
+ msg->ack = 0x345;
+ msg->len = size0 - sizeof(*msg);
+
+ ctl = (struct cn_ctl_msg *)(msg + 1);
+
+ ctl->idx_notify_num = 1;
+ ctl->val_notify_num = 2;
+ ctl->group = group;
+ ctl->len = msg->len - sizeof(*ctl);
+
+ req = (struct cn_notify_req *)(ctl + 1);
+
+ /*
+ * Idx.
+ */
+ req->first = cn_test_id.idx;
+ req->range = 10;
+
+ /*
+ * Val 0.
+ */
+ req++;
+ req->first = cn_test_id.val;
+ req->range = 10;
+
+ /*
+ * Val 1.
+ */
+ req++;
+ req->first = cn_test_id.val + 20;
+ req->range = 10;
+
+ NETLINK_CB(skb).dst_groups = ctl->group;
+ //netlink_broadcast(nls, skb, 0, ctl->group, GFP_ATOMIC);
+ netlink_unicast(nls, skb, 0, 0);
+
+ printk(KERN_INFO "Request was sent. Group=0x%x.\n", ctl->group);
+
+ return 0;
+
+nlmsg_failure:
+ printk(KERN_ERR "Failed to send %u.%u\n", msg->seq, msg->ack);
+ kfree_skb(skb);
+ return -EINVAL;
+}
+
+static u32 cn_test_timer_counter;
+static void cn_test_timer_func(unsigned long __data)
+{
+ struct cn_msg *m;
+ char data[32];
+
+ m = kmalloc(sizeof(*m) + sizeof(data), GFP_ATOMIC);
+ if (m) {
+ memset(m, 0, sizeof(*m) + sizeof(data));
+
+ memcpy(&m->id, &cn_test_id, sizeof(m->id));
+ m->seq = cn_test_timer_counter;
+ m->len = sizeof(data);
+
+ m->len =
+ scnprintf(data, sizeof(data), "counter = %u",
+ cn_test_timer_counter) + 1;
+
+ memcpy(m + 1, data, m->len);
+
+ cn_netlink_send(m, 0, gfp_any());
+ kfree(m);
+ }
+
+ cn_test_timer_counter++;
+
+ mod_timer(&cn_test_timer, jiffies + HZ);
+}
+
+static int cn_test_init(void)
+{
+ int err;
+
+ err = cn_add_callback(&cn_test_id, cn_test_name, cn_test_callback);
+ if (err)
+ goto err_out;
+ cn_test_id.val++;
+ err = cn_add_callback(&cn_test_id, cn_test_name, cn_test_callback);
+ if (err) {
+ cn_del_callback(&cn_test_id);
+ goto err_out;
+ }
+
+ init_timer(&cn_test_timer);
+ cn_test_timer.function = cn_test_timer_func;
+ cn_test_timer.expires = jiffies + HZ;
+ cn_test_timer.data = 0;
+ add_timer(&cn_test_timer);
+
+ return 0;
+
+ err_out:
+ if (nls && nls->sk_socket)
+ sock_release(nls->sk_socket);
+
+ return err;
+}
+
+static void cn_test_fini(void)
+{
+ del_timer_sync(&cn_test_timer);
+ cn_del_callback(&cn_test_id);
+ cn_test_id.val--;
+ cn_del_callback(&cn_test_id);
+ if (nls && nls->sk_socket)
+ sock_release(nls->sk_socket);
+}
+
+module_init(cn_test_init);
+module_exit(cn_test_fini);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
+MODULE_DESCRIPTION("Connector's test module");
diff --git a/Documentation/connector/connector.txt b/Documentation/connector/connector.txt
new file mode 100644
index 00000000000..54a0a14bfbe
--- /dev/null
+++ b/Documentation/connector/connector.txt
@@ -0,0 +1,133 @@
+/*****************************************/
+Kernel Connector.
+/*****************************************/
+
+Kernel connector - new netlink based userspace <-> kernel space easy
+to use communication module.
+
+Connector driver adds possibility to connect various agents using
+netlink based network. One must register callback and
+identifier. When driver receives special netlink message with
+appropriate identifier, appropriate callback will be called.
+
+From the userspace point of view it's quite straightforward:
+
+ socket();
+ bind();
+ send();
+ recv();
+
+But if kernelspace want to use full power of such connections, driver
+writer must create special sockets, must know about struct sk_buff
+handling... Connector allows any kernelspace agents to use netlink
+based networking for inter-process communication in a significantly
+easier way:
+
+int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *));
+void cn_netlink_send(struct cn_msg *msg, u32 __group, int gfp_mask);
+
+struct cb_id
+{
+ __u32 idx;
+ __u32 val;
+};
+
+idx and val are unique identifiers which must be registered in
+connector.h for in-kernel usage. void (*callback) (void *) - is a
+callback function which will be called when message with above idx.val
+will be received by connector core. Argument for that function must
+be dereferenced to struct cn_msg *.
+
+struct cn_msg
+{
+ struct cb_id id;
+
+ __u32 seq;
+ __u32 ack;
+
+ __u32 len; /* Length of the following data */
+ __u8 data[0];
+};
+
+/*****************************************/
+Connector interfaces.
+/*****************************************/
+
+int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *));
+
+Registers new callback with connector core.
+
+struct cb_id *id - unique connector's user identifier.
+ It must be registered in connector.h for legal in-kernel users.
+char *name - connector's callback symbolic name.
+void (*callback) (void *) - connector's callback.
+ Argument must be dereferenced to struct cn_msg *.
+
+void cn_del_callback(struct cb_id *id);
+
+Unregisters new callback with connector core.
+
+struct cb_id *id - unique connector's user identifier.
+
+void cn_netlink_send(struct cn_msg *msg, u32 __groups, int gfp_mask);
+
+Sends message to the specified groups. It can be safely called from
+any context, but may silently fail under strong memory pressure.
+
+struct cn_msg * - message header(with attached data).
+u32 __group - destination group.
+ If __group is zero, then appropriate group will
+ be searched through all registered connector users,
+ and message will be delivered to the group which was
+ created for user with the same ID as in msg.
+ If __group is not zero, then message will be delivered
+ to the specified group.
+int gfp_mask - GFP mask.
+
+Note: When registering new callback user, connector core assigns
+netlink group to the user which is equal to it's id.idx.
+
+/*****************************************/
+Protocol description.
+/*****************************************/
+
+Current offers transport layer with fixed header. Recommended
+protocol which uses such header is following:
+
+msg->seq and msg->ack are used to determine message genealogy. When
+someone sends message it puts there locally unique sequence and random
+acknowledge numbers. Sequence number may be copied into
+nlmsghdr->nlmsg_seq too.
+
+Sequence number is incremented with each message to be sent.
+
+If we expect reply to our message, then sequence number in received
+message MUST be the same as in original message, and acknowledge
+number MUST be the same + 1.
+
+If we receive message and it's sequence number is not equal to one we
+are expecting, then it is new message. If we receive message and it's
+sequence number is the same as one we are expecting, but it's
+acknowledge is not equal acknowledge number in original message + 1,
+then it is new message.
+
+Obviously, protocol header contains above id.
+
+connector allows event notification in the following form: kernel
+driver or userspace process can ask connector to notify it when
+selected id's will be turned on or off(registered or unregistered it's
+callback). It is done by sending special command to connector
+driver(it also registers itself with id={-1, -1}).
+
+As example of usage Documentation/connector now contains cn_test.c -
+testing module which uses connector to request notification and to
+send messages.
+
+/*****************************************/
+Reliability.
+/*****************************************/
+
+Netlink itself is not reliable protocol, that means that messages can
+be lost due to memory pressure or process' receiving queue overflowed,
+so caller is warned must be prepared. That is why struct cn_msg [main
+connector's message header] contains u32 seq and u32 ack fields.
diff --git a/Documentation/fb/intel810.txt b/Documentation/fb/intel810.txt
index fd68b162e4a..4f0d6bc789e 100644
--- a/Documentation/fb/intel810.txt
+++ b/Documentation/fb/intel810.txt
@@ -5,6 +5,7 @@ Intel 810/815 Framebuffer driver
March 17, 2002
First Released: July 2001
+ Last Update: September 12, 2005
================================================================
A. Introduction
@@ -44,6 +45,8 @@ B. Features
- Hardware Cursor Support
+ - Supports EDID probing either by DDC/I2C or through the BIOS
+
C. List of available options
a. "video=i810fb"
@@ -52,14 +55,17 @@ C. List of available options
Recommendation: required
b. "xres:<value>"
- select horizontal resolution in pixels
+ select horizontal resolution in pixels. (This parameter will be
+ ignored if 'mode_option' is specified. See 'o' below).
Recommendation: user preference
(default = 640)
c. "yres:<value>"
select vertical resolution in scanlines. If Discrete Video Timings
- is enabled, this will be ignored and computed as 3*xres/4.
+ is enabled, this will be ignored and computed as 3*xres/4. (This
+ parameter will be ignored if 'mode_option' is specified. See 'o'
+ below)
Recommendation: user preference
(default = 480)
@@ -86,7 +92,8 @@ C. List of available options
g. "hsync1/hsync2:<value>"
select the minimum and maximum Horizontal Sync Frequency of the
monitor in KHz. If a using a fixed frequency monitor, hsync1 must
- be equal to hsync2.
+ be equal to hsync2. If EDID probing is successful, these will be
+ ignored and values will be taken from the EDID block.
Recommendation: check monitor manual for correct values
default (29/30)
@@ -94,7 +101,8 @@ C. List of available options
h. "vsync1/vsync2:<value>"
select the minimum and maximum Vertical Sync Frequency of the monitor
in Hz. You can also use this option to lock your monitor's refresh
- rate.
+ rate. If EDID probing is successful, these will be ignored and values
+ will be taken from the EDID block.
Recommendation: check monitor manual for correct values
(default = 60/60)
@@ -154,7 +162,11 @@ C. List of available options
Recommendation: do not set
(default = not set)
-
+ o. <xres>x<yres>[-<bpp>][@<refresh>]
+ The driver will now accept specification of boot mode option. If this
+ is specified, the options 'xres' and 'yres' will be ignored. See
+ Documentation/fb/modedb.txt for usage.
+
D. Kernel booting
Separate each option/option-pair by commas (,) and the option from its value
@@ -176,7 +188,10 @@ will be computed based on the hsync1/hsync2 and vsync1/vsync2 values.
IMPORTANT:
You must include hsync1, hsync2, vsync1 and vsync2 to enable video modes
-better than 640x480 at 60Hz.
+better than 640x480 at 60Hz. HOWEVER, if your chipset/display combination
+supports I2C and has an EDID block, you can safely exclude hsync1, hsync2,
+vsync1 and vsync2 parameters. These parameters will be taken from the EDID
+block.
E. Module options
@@ -217,32 +232,21 @@ F. Setup
This is required. The option is under "Character Devices"
d. Under "Graphics Support", select "Intel 810/815" either statically
- or as a module. Choose "use VESA GTF for video timings" if you
- need to maximize the capability of your display. To be on the
+ or as a module. Choose "use VESA Generalized Timing Formula" if
+ you need to maximize the capability of your display. To be on the
safe side, you can leave this unselected.
- e. If you want a framebuffer console, enable it under "Console
+ e. If you want support for DDC/I2C probing (Plug and Play Displays),
+ set 'Enable DDC Support' to 'y'. To make this option appear, set
+ 'use VESA Generalized Timing Formula' to 'y'.
+
+ f. If you want a framebuffer console, enable it under "Console
Drivers"
- f. Compile your kernel.
+ g. Compile your kernel.
- g. Load the driver as described in section D and E.
+ h. Load the driver as described in section D and E.
- Optional:
- h. If you are going to run XFree86 with its native drivers, the
- standard XFree86 4.1.0 and 4.2.0 drivers should work as is.
- However, there's a bug in the XFree86 i810 drivers. It attempts
- to use XAA even when switched to the console. This will crash
- your server. I have a fix at this site:
-
- http://i810fb.sourceforge.net.
-
- You can either use the patch, or just replace
-
- /usr/X11R6/lib/modules/drivers/i810_drv.o
-
- with the one provided at the website.
-
i. Try the DirectFB (http://www.directfb.org) + the i810 gfxdriver
patch to see the chipset in action (or inaction :-).
diff --git a/Documentation/firmware_class/firmware_sample_driver.c b/Documentation/firmware_class/firmware_sample_driver.c
index e1c56a7e658..4bef8c25172 100644
--- a/Documentation/firmware_class/firmware_sample_driver.c
+++ b/Documentation/firmware_class/firmware_sample_driver.c
@@ -32,14 +32,14 @@ static void sample_firmware_load(char *firmware, int size)
u8 buf[size+1];
memcpy(buf, firmware, size);
buf[size] = '\0';
- printk("firmware_sample_driver: firmware: %s\n", buf);
+ printk(KERN_INFO "firmware_sample_driver: firmware: %s\n", buf);
}
static void sample_probe_default(void)
{
/* uses the default method to get the firmware */
const struct firmware *fw_entry;
- printk("firmware_sample_driver: a ghost device got inserted :)\n");
+ printk(KERN_INFO "firmware_sample_driver: a ghost device got inserted :)\n");
if(request_firmware(&fw_entry, "sample_driver_fw", &ghost_device)!=0)
{
@@ -61,7 +61,7 @@ static void sample_probe_specific(void)
/* NOTE: This currently doesn't work */
- printk("firmware_sample_driver: a ghost device got inserted :)\n");
+ printk(KERN_INFO "firmware_sample_driver: a ghost device got inserted :)\n");
if(request_firmware(NULL, "sample_driver_fw", &ghost_device)!=0)
{
@@ -83,7 +83,7 @@ static void sample_probe_async_cont(const struct firmware *fw, void *context)
return;
}
- printk("firmware_sample_driver: device pointer \"%s\"\n",
+ printk(KERN_INFO "firmware_sample_driver: device pointer \"%s\"\n",
(char *)context);
sample_firmware_load(fw->data, fw->size);
}
diff --git a/Documentation/input/appletouch.txt b/Documentation/input/appletouch.txt
new file mode 100644
index 00000000000..b48d11d0326
--- /dev/null
+++ b/Documentation/input/appletouch.txt
@@ -0,0 +1,84 @@
+Apple Touchpad Driver (appletouch)
+----------------------------------
+ Copyright (C) 2005 Stelian Pop <stelian@popies.net>
+
+appletouch is a Linux kernel driver for the USB touchpad found on post
+February 2005 Apple Alu Powerbooks.
+
+This driver is derived from Johannes Berg's appletrackpad driver[1], but it has
+been improved in some areas:
+ * appletouch is a full kernel driver, no userspace program is necessary
+ * appletouch can be interfaced with the synaptics X11 driver, in order
+ to have touchpad acceleration, scrolling, etc.
+
+Credits go to Johannes Berg for reverse-engineering the touchpad protocol,
+Frank Arnold for further improvements, and Alex Harper for some additional
+information about the inner workings of the touchpad sensors.
+
+Usage:
+------
+
+In order to use the touchpad in the basic mode, compile the driver and load
+the module. A new input device will be detected and you will be able to read
+the mouse data from /dev/input/mice (using gpm, or X11).
+
+In X11, you can configure the touchpad to use the synaptics X11 driver, which
+will give additional functionalities, like acceleration, scrolling, 2 finger
+tap for middle button mouse emulation, 3 finger tap for right button mouse
+emulation, etc. In order to do this, make sure you're using a recent version of
+the synaptics driver (tested with 0.14.2, available from [2]), and configure a
+new input device in your X11 configuration file (take a look below for an
+example). For additional configuration, see the synaptics driver documentation.
+
+ Section "InputDevice"
+ Identifier "Synaptics Touchpad"
+ Driver "synaptics"
+ Option "SendCoreEvents" "true"
+ Option "Device" "/dev/input/mice"
+ Option "Protocol" "auto-dev"
+ Option "LeftEdge" "0"
+ Option "RightEdge" "850"
+ Option "TopEdge" "0"
+ Option "BottomEdge" "645"
+ Option "MinSpeed" "0.4"
+ Option "MaxSpeed" "1"
+ Option "AccelFactor" "0.02"
+ Option "FingerLow" "0"
+ Option "FingerHigh" "30"
+ Option "MaxTapMove" "20"
+ Option "MaxTapTime" "100"
+ Option "HorizScrollDelta" "0"
+ Option "VertScrollDelta" "30"
+ Option "SHMConfig" "on"
+ EndSection
+
+ Section "ServerLayout"
+ ...
+ InputDevice "Mouse"
+ InputDevice "Synaptics Touchpad"
+ ...
+ EndSection
+
+Fuzz problems:
+--------------
+
+The touchpad sensors are very sensitive to heat, and will generate a lot of
+noise when the temperature changes. This is especially true when you power-on
+the laptop for the first time.
+
+The appletouch driver tries to handle this noise and auto adapt itself, but it
+is not perfect. If finger movements are not recognized anymore, try reloading
+the driver.
+
+You can activate debugging using the 'debug' module parameter. A value of 0
+deactivates any debugging, 1 activates tracing of invalid samples, 2 activates
+full tracing (each sample is being traced):
+ modprobe appletouch debug=1
+ or
+ echo "1" > /sys/module/appletouch/parameters/debug
+
+Links:
+------
+
+[1]: http://johannes.sipsolutions.net/PowerBook/touchpad/
+[2]: http://web.telia.com/~u89404340/touchpad/index.html
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index db2603ceabb..7086f0a90d1 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -164,6 +164,15 @@ running once the system is up.
over-ride platform specific driver.
See also Documentation/acpi-hotkey.txt.
+ enable_timer_pin_1 [i386,x86-64]
+ Enable PIN 1 of APIC timer
+ Can be useful to work around chipset bugs (in particular on some ATI chipsets)
+ The kernel tries to set a reasonable default.
+
+ disable_timer_pin_1 [i386,x86-64]
+ Disable PIN 1 of APIC timer
+ Can be useful to work around chipset bugs.
+
ad1816= [HW,OSS]
Format: <io>,<irq>,<dma>,<dma2>
See also Documentation/sound/oss/AD1816.
diff --git a/Documentation/usb/proc_usb_info.txt b/Documentation/usb/proc_usb_info.txt
index 729c72d34c8..f86550fe38e 100644
--- a/Documentation/usb/proc_usb_info.txt
+++ b/Documentation/usb/proc_usb_info.txt
@@ -20,7 +20,7 @@ the /proc/bus/usb/BBB/DDD files.
to /etc/fstab. This will mount usbfs at each reboot.
You can then issue `cat /proc/bus/usb/devices` to extract
- USB device information, and user mode drivers can use usbfs
+ USB device information, and user mode drivers can use usbfs
to interact with USB devices.
There are a number of mount options supported by usbfs.
@@ -32,7 +32,7 @@ the /proc/bus/usb/BBB/DDD files.
still see references to the older "usbdevfs" name.
For more information on mounting the usbfs file system, see the
-"USB Device Filesystem" section of the USB Guide. The latest copy
+"USB Device Filesystem" section of the USB Guide. The latest copy
of the USB Guide can be found at http://www.linux-usb.org/
@@ -133,7 +133,7 @@ B: Alloc=ddd/ddd us (xx%), #Int=ddd, #Iso=ddd
are the only transfers that reserve bandwidth. Control and bulk
transfers use all other bandwidth, including reserved bandwidth that
is not used for transfers (such as for short packets).
-
+
The percentage is how much of the "reserved" bandwidth is scheduled by
those transfers. For a low or full speed bus (loosely, "USB 1.1"),
90% of the bus bandwidth is reserved. For a high speed bus (loosely,
@@ -197,7 +197,7 @@ C:* #Ifs=dd Cfg#=dd Atr=xx MPwr=dddmA
| | |__NumberOfInterfaces
| |__ "*" indicates the active configuration (others are " ")
|__Config info tag
-
+
USB devices may have multiple configurations, each of which act
rather differently. For example, a bus-powered configuration
might be much less capable than one that is self-powered. Only
@@ -228,7 +228,7 @@ I: If#=dd Alt=dd #EPs=dd Cls=xx(sssss) Sub=xx Prot=xx Driver=ssss
For example, default settings may not use more than a small
amount of periodic bandwidth. To use significant fractions
of bus bandwidth, drivers must select a non-default altsetting.
-
+
Only one setting for an interface may be active at a time, and
only one driver may bind to an interface at a time. Most devices
have only one alternate setting per interface.
@@ -297,18 +297,21 @@ S: SerialNumber=dce0
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
+
T: Bus=00 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 4
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0451 ProdID=1446 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
+
T: Bus=00 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=04b4 ProdID=0001 Rev= 0.00
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=mouse
E: Ad=81(I) Atr=03(Int.) MxPS= 3 Ivl= 10ms
+
T: Bus=00 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0565 ProdID=0001 Rev= 1.08
diff --git a/Documentation/x86_64/boot-options.txt b/Documentation/x86_64/boot-options.txt
index 678e8f192db..ffe1c062088 100644
--- a/Documentation/x86_64/boot-options.txt
+++ b/Documentation/x86_64/boot-options.txt
@@ -11,6 +11,11 @@ Machine check
If your BIOS doesn't do that it's a good idea to enable though
to make sure you log even machine check events that result
in a reboot.
+ mce=tolerancelevel (number)
+ 0: always panic, 1: panic if deadlock possible,
+ 2: try to avoid panic, 3: never panic or exit (for testing)
+ default is 1
+ Can be also set using sysfs which is preferable.
nomce (for compatibility with i386): same as mce=off