summaryrefslogtreecommitdiffstats
path: root/Documentation/hwmon
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/hwmon')
-rw-r--r--Documentation/hwmon/ltc421550
1 files changed, 50 insertions, 0 deletions
diff --git a/Documentation/hwmon/ltc4215 b/Documentation/hwmon/ltc4215
new file mode 100644
index 00000000000..2e6a21eb656
--- /dev/null
+++ b/Documentation/hwmon/ltc4215
@@ -0,0 +1,50 @@
+Kernel driver ltc4215
+=====================
+
+Supported chips:
+ * Linear Technology LTC4215
+ Prefix: 'ltc4215'
+ Addresses scanned: 0x44
+ Datasheet:
+ http://www.linear.com/pc/downloadDocument.do?navId=H0,C1,C1003,C1006,C1163,P17572,D12697
+
+Author: Ira W. Snyder <iws@ovro.caltech.edu>
+
+
+Description
+-----------
+
+The LTC4215 controller allows a board to be safely inserted and removed
+from a live backplane.
+
+
+Usage Notes
+-----------
+
+This driver does not probe for LTC4215 devices, due to the fact that some
+of the possible addresses are unfriendly to probing. You will need to use
+the "force" parameter to tell the driver where to find the device.
+
+Example: the following will load the driver for an LTC4215 at address 0x44
+on I2C bus #0:
+$ modprobe ltc4215 force=0,0x44
+
+
+Sysfs entries
+-------------
+
+The LTC4215 has built-in limits for overvoltage, undervoltage, and
+undercurrent warnings. This makes it very likely that the reference
+circuit will be used.
+
+in1_input input voltage
+in2_input output voltage
+
+in1_min_alarm input undervoltage alarm
+in1_max_alarm input overvoltage alarm
+
+curr1_input current
+curr1_max_alarm overcurrent alarm
+
+power1_input power usage
+power1_alarm power bad alarm