diff options
| -rw-r--r-- | drivers/net/tg3.c | 143 | ||||
| -rw-r--r-- | drivers/net/tg3.h | 4 |
2 files changed, 142 insertions, 5 deletions
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 9cd8613625f..d4035de6440 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -3655,11 +3655,139 @@ static void tg3_set_txd(struct tg3 *tp, int entry, txd->vlan_tag = vlan_tag << TXD_VLAN_TAG_SHIFT; } +/* hard_start_xmit for devices that don't have any bugs and + * support TG3_FLG2_HW_TSO_2 only. + */ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct tg3 *tp = netdev_priv(dev); dma_addr_t mapping; u32 len, entry, base_flags, mss; + + len = skb_headlen(skb); + + /* No BH disabling for tx_lock here. We are running in BH disabled + * context and TX reclaim runs via tp->poll inside of a software + * interrupt. Furthermore, IRQ processing runs lockless so we have + * no IRQ context deadlocks to worry about either. Rejoice! + */ + if (!spin_trylock(&tp->tx_lock)) + return NETDEV_TX_LOCKED; + + if (unlikely(TX_BUFFS_AVAIL(tp) <= (skb_shinfo(skb)->nr_frags + 1))) { + if (!netif_queue_stopped(dev)) { + netif_stop_queue(dev); + + /* This is a hard error, log it. */ + printk(KERN_ERR PFX "%s: BUG! Tx Ring full when " + "queue awake!\n", dev->name); + } + spin_unlock(&tp->tx_lock); + return NETDEV_TX_BUSY; + } + + entry = tp->tx_prod; + base_flags = 0; +#if TG3_TSO_SUPPORT != 0 + mss = 0; + if (skb->len > (tp->dev->mtu + ETH_HLEN) && + (mss = skb_shinfo(skb)->tso_size) != 0) { + int tcp_opt_len, ip_tcp_len; + + if (skb_header_cloned(skb) && + pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) { + dev_kfree_skb(skb); + goto out_unlock; + } + + tcp_opt_len = ((skb->h.th->doff - 5) * 4); + ip_tcp_len = (skb->nh.iph->ihl * 4) + sizeof(struct tcphdr); + + base_flags |= (TXD_FLAG_CPU_PRE_DMA | + TXD_FLAG_CPU_POST_DMA); + + skb->nh.iph->check = 0; + skb->nh.iph->tot_len = htons(mss + ip_tcp_len + tcp_opt_len); + + skb->h.th->check = 0; + + mss |= (ip_tcp_len + tcp_opt_len) << 9; + } + else if (skb->ip_summed == CHECKSUM_HW) + base_flags |= TXD_FLAG_TCPUDP_CSUM; +#else + mss = 0; + if (skb->ip_summed == CHECKSUM_HW) + base_flags |= TXD_FLAG_TCPUDP_CSUM; +#endif +#if TG3_VLAN_TAG_USED + if (tp->vlgrp != NULL && vlan_tx_tag_present(skb)) + base_flags |= (TXD_FLAG_VLAN | + (vlan_tx_tag_get(skb) << 16)); +#endif + + /* Queue skb data, a.k.a. the main skb fragment. */ + mapping = pci_map_single(tp->pdev, skb->data, len, PCI_DMA_TODEVICE); + + tp->tx_buffers[entry].skb = skb; + pci_unmap_addr_set(&tp->tx_buffers[entry], mapping, mapping); + + tg3_set_txd(tp, entry, mapping, len, base_flags, + (skb_shinfo(skb)->nr_frags == 0) | (mss << 1)); + + entry = NEXT_TX(entry); + + /* Now loop through additional data fragments, and queue them. */ + if (skb_shinfo(skb)->nr_frags > 0) { + unsigned int i, last; + + last = skb_shinfo(skb)->nr_frags - 1; + for (i = 0; i <= last; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + + len = frag->size; + mapping = pci_map_page(tp->pdev, + frag->page, + frag->page_offset, + len, PCI_DMA_TODEVICE); + + tp->tx_buffers[entry].skb = NULL; + pci_unmap_addr_set(&tp->tx_buffers[entry], mapping, mapping); + + tg3_set_txd(tp, entry, mapping, len, + base_flags, (i == last) | (mss << 1)); + + entry = NEXT_TX(entry); + } + } + + /* Packets are ready, update Tx producer idx local and on card. */ + tw32_tx_mbox((MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW), entry); + + tp->tx_prod = entry; + if (TX_BUFFS_AVAIL(tp) <= (MAX_SKB_FRAGS + 1)) { + netif_stop_queue(dev); + if (TX_BUFFS_AVAIL(tp) > TG3_TX_WAKEUP_THRESH) + netif_wake_queue(tp->dev); + } + +out_unlock: + mmiowb(); + spin_unlock(&tp->tx_lock); + + dev->trans_start = jiffies; + + return NETDEV_TX_OK; +} + +/* hard_start_xmit for devices that have the 4G bug and/or 40-bit bug and + * support TG3_FLG2_HW_TSO_1 or firmware TSO only. + */ +static int tg3_start_xmit_dma_bug(struct sk_buff *skb, struct net_device *dev) +{ + struct tg3 *tp = netdev_priv(dev); + dma_addr_t mapping; + u32 len, entry, base_flags, mss; int would_hit_hwbug; len = skb_headlen(skb); @@ -9811,8 +9939,12 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) (tp->tg3_flags2 & TG3_FLG2_5750_PLUS)) tp->tg3_flags2 |= TG3_FLG2_5705_PLUS; - if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS) - tp->tg3_flags2 |= TG3_FLG2_HW_TSO; + if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS) { + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787) + tp->tg3_flags2 |= TG3_FLG2_HW_TSO_2; + else + tp->tg3_flags2 |= TG3_FLG2_HW_TSO_1; + } if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705 && GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5750 && @@ -10163,10 +10295,13 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) else tp->tg3_flags &= ~TG3_FLAG_POLL_SERDES; - /* It seems all chips can get confused if TX buffers + /* All chips before 5787 can get confused if TX buffers * straddle the 4GB address boundary in some cases. */ - tp->dev->hard_start_xmit = tg3_start_xmit; + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787) + tp->dev->hard_start_xmit = tg3_start_xmit; + else + tp->dev->hard_start_xmit = tg3_start_xmit_dma_bug; tp->rx_offset = 2; if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701 && diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 6a0d2fa0574..ba3466c8a96 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2194,7 +2194,7 @@ struct tg3 { #define TG3_FLG2_PHY_SERDES 0x00002000 #define TG3_FLG2_CAPACITIVE_COUPLING 0x00004000 #define TG3_FLG2_FLASH 0x00008000 -#define TG3_FLG2_HW_TSO 0x00010000 +#define TG3_FLG2_HW_TSO_1 0x00010000 #define TG3_FLG2_SERDES_PREEMPHASIS 0x00020000 #define TG3_FLG2_5705_PLUS 0x00040000 #define TG3_FLG2_5750_PLUS 0x00080000 @@ -2207,6 +2207,8 @@ struct tg3 { #define TG3_FLG2_PARALLEL_DETECT 0x01000000 #define TG3_FLG2_ICH_WORKAROUND 0x02000000 #define TG3_FLG2_5780_CLASS 0x04000000 +#define TG3_FLG2_HW_TSO_2 0x08000000 +#define TG3_FLG2_HW_TSO (TG3_FLG2_HW_TSO_1 | TG3_FLG2_HW_TSO_2) u32 split_mode_max_reqs; #define SPLIT_MODE_5704_MAX_REQ 3 |