summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/powerpc/Kconfig2
-rw-r--r--arch/powerpc/kernel/Makefile7
-rw-r--r--arch/powerpc/kernel/btext.c130
-rw-r--r--arch/powerpc/kernel/head_32.S29
-rw-r--r--arch/powerpc/kernel/setup_32.c28
-rw-r--r--arch/powerpc/kernel/setup_64.c4
-rw-r--r--arch/powerpc/kernel/udbg.c8
-rw-r--r--arch/powerpc/kernel/udbg_16550.c4
-rw-r--r--arch/powerpc/mm/init_32.c5
-rw-r--r--arch/powerpc/platforms/powermac/Makefile1
-rw-r--r--arch/powerpc/platforms/powermac/feature.c68
-rw-r--r--arch/powerpc/platforms/powermac/low_i2c.c27
-rw-r--r--arch/powerpc/platforms/powermac/pic.c2
-rw-r--r--arch/powerpc/platforms/powermac/setup.c52
-rw-r--r--arch/powerpc/platforms/powermac/udbg_adb.c218
-rw-r--r--arch/powerpc/platforms/powermac/udbg_scc.c (renamed from arch/powerpc/kernel/udbg_scc.c)64
-rw-r--r--arch/powerpc/platforms/pseries/lpar.c8
-rw-r--r--arch/powerpc/xmon/Makefile8
-rw-r--r--arch/powerpc/xmon/start.c (renamed from arch/powerpc/xmon/start_64.c)0
-rw-r--r--arch/powerpc/xmon/start_32.c441
-rw-r--r--arch/powerpc/xmon/start_8xx.c44
-rw-r--r--arch/ppc/kernel/setup.c3
-rw-r--r--drivers/i2c/busses/i2c-keywest.c25
-rw-r--r--drivers/macintosh/via-cuda.c48
-rw-r--r--drivers/macintosh/via-pmu.c87
-rw-r--r--include/asm-powerpc/btext.h19
-rw-r--r--include/asm-powerpc/udbg.h9
-rw-r--r--include/asm-ppc/btext.h2
-rw-r--r--include/asm-ppc/machdep.h4
29 files changed, 627 insertions, 720 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 39ca7b9da36..0e4617104f8 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -50,7 +50,7 @@ config PPC
config EARLY_PRINTK
bool
- default y if PPC64
+ default y
config COMPAT
bool
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index bf3fd6f0224..89714929f44 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -18,7 +18,7 @@ obj-y += vdso32/
obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \
signal_64.o ptrace32.o systbl.o \
paca.o ioctl32.o cpu_setup_power4.o \
- firmware.o sysfs.o udbg.o idle_64.o
+ firmware.o sysfs.o idle_64.o
obj-$(CONFIG_PPC64) += vdso64/
obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o
obj-$(CONFIG_POWER4) += idle_power4.o
@@ -46,7 +46,7 @@ extra-$(CONFIG_8xx) := head_8xx.o
extra-y += vmlinux.lds
obj-y += process.o init_task.o time.o \
- prom.o traps.o setup-common.o
+ prom.o traps.o setup-common.o udbg.o
obj-$(CONFIG_PPC32) += entry_32.o setup_32.o misc_32.o systbl.o
obj-$(CONFIG_PPC64) += misc_64.o dma_64.o iommu.o
obj-$(CONFIG_PPC_OF) += prom_init.o
@@ -56,8 +56,7 @@ obj-$(CONFIG_6xx) += idle_6xx.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_PPC_MULTIPLATFORM) += legacy_serial.o
-obj64-$(CONFIG_PPC_MULTIPLATFORM) += udbg_16550.o
-obj64-$(CONFIG_PPC_PMAC) += udbg_scc.o
+obj-$(CONFIG_PPC_MULTIPLATFORM) += udbg_16550.o
module-$(CONFIG_PPC64) += module_64.o
obj-$(CONFIG_MODULES) += $(module-y)
diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
index bdfba92b2b3..893dd24a9f6 100644
--- a/arch/powerpc/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -31,15 +31,18 @@ static void draw_byte_32(unsigned char *bits, unsigned int *base, int rb);
static void draw_byte_16(unsigned char *bits, unsigned int *base, int rb);
static void draw_byte_8(unsigned char *bits, unsigned int *base, int rb);
-static int g_loc_X;
-static int g_loc_Y;
-static int g_max_loc_X;
-static int g_max_loc_Y;
+#define __force_data __attribute__((__section__(".data")))
-static int dispDeviceRowBytes;
-static int dispDeviceDepth;
-static int dispDeviceRect[4];
-static unsigned char *dispDeviceBase, *logicalDisplayBase;
+static int g_loc_X __force_data;
+static int g_loc_Y __force_data;
+static int g_max_loc_X __force_data;
+static int g_max_loc_Y __force_data;
+
+static int dispDeviceRowBytes __force_data;
+static int dispDeviceDepth __force_data;
+static int dispDeviceRect[4] __force_data;
+static unsigned char *dispDeviceBase __force_data;
+static unsigned char *logicalDisplayBase __force_data;
unsigned long disp_BAT[2] __initdata = {0, 0};
@@ -47,7 +50,7 @@ unsigned long disp_BAT[2] __initdata = {0, 0};
static unsigned char vga_font[cmapsz];
-int boot_text_mapped;
+int boot_text_mapped __force_data = 0;
int force_printk_to_btext = 0;
#ifdef CONFIG_PPC32
@@ -66,8 +69,7 @@ int force_printk_to_btext = 0;
* is really badly aligned, but I didn't encounter this case
* yet.
*/
-void __init
-btext_prepare_BAT(void)
+void __init btext_prepare_BAT(void)
{
unsigned long vaddr = KERNELBASE + 0x10000000;
unsigned long addr;
@@ -95,12 +97,13 @@ btext_prepare_BAT(void)
}
#endif
-/* This function will enable the early boot text when doing OF booting. This
- * way, xmon output should work too
+
+/* This function can be used to enable the early boot text when doing
+ * OF booting or within bootx init. It must be followed by a btext_unmap()
+ * call before the logical address becomes unuseable
*/
-void __init
-btext_setup_display(int width, int height, int depth, int pitch,
- unsigned long address)
+void __init btext_setup_display(int width, int height, int depth, int pitch,
+ unsigned long address)
{
g_loc_X = 0;
g_loc_Y = 0;
@@ -116,6 +119,11 @@ btext_setup_display(int width, int height, int depth, int pitch,
boot_text_mapped = 1;
}
+void __init btext_unmap(void)
+{
+ boot_text_mapped = 0;
+}
+
/* Here's a small text engine to use during early boot
* or for debugging purposes
*
@@ -127,7 +135,7 @@ btext_setup_display(int width, int height, int depth, int pitch,
* changes.
*/
-void map_boot_text(void)
+static void map_boot_text(void)
{
unsigned long base, offset, size;
unsigned char *vbase;
@@ -175,8 +183,9 @@ int btext_initialize(struct device_node *np)
if (prop)
address = *prop;
- /* FIXME: Add support for PCI reg properties */
-
+ /* FIXME: Add support for PCI reg properties. Right now, only
+ * reliable on macs
+ */
if (address == 0)
return -EINVAL;
@@ -184,7 +193,6 @@ int btext_initialize(struct device_node *np)
g_loc_Y = 0;
g_max_loc_X = width / 8;
g_max_loc_Y = height / 16;
- logicalDisplayBase = (unsigned char *)address;
dispDeviceBase = (unsigned char *)address;
dispDeviceRowBytes = pitch;
dispDeviceDepth = depth;
@@ -197,7 +205,7 @@ int btext_initialize(struct device_node *np)
return 0;
}
-void __init init_boot_display(void)
+int __init btext_find_display(int allow_nonstdout)
{
char *name;
struct device_node *np = NULL;
@@ -218,8 +226,8 @@ void __init init_boot_display(void)
}
if (np)
rc = btext_initialize(np);
- if (rc == 0)
- return;
+ if (rc == 0 || !allow_nonstdout)
+ return rc;
for (np = NULL; (np = of_find_node_by_type(np, "display"));) {
if (get_property(np, "linux,opened", NULL)) {
@@ -228,8 +236,9 @@ void __init init_boot_display(void)
printk("result: %d\n", rc);
}
if (rc == 0)
- return;
+ break;
}
+ return rc;
}
/* Calc the base address of a given point (x,y) */
@@ -277,44 +286,83 @@ EXPORT_SYMBOL(btext_update_display);
void btext_clearscreen(void)
{
- unsigned long *base = (unsigned long *)calc_base(0, 0);
+ unsigned int *base = (unsigned int *)calc_base(0, 0);
unsigned long width = ((dispDeviceRect[2] - dispDeviceRect[0]) *
- (dispDeviceDepth >> 3)) >> 3;
+ (dispDeviceDepth >> 3)) >> 2;
int i,j;
for (i=0; i<(dispDeviceRect[3] - dispDeviceRect[1]); i++)
{
- unsigned long *ptr = base;
+ unsigned int *ptr = base;
for(j=width; j; --j)
*(ptr++) = 0;
- base += (dispDeviceRowBytes >> 3);
+ base += (dispDeviceRowBytes >> 2);
+ }
+}
+
+void btext_flushscreen(void)
+{
+ unsigned int *base = (unsigned int *)calc_base(0, 0);
+ unsigned long width = ((dispDeviceRect[2] - dispDeviceRect[0]) *
+ (dispDeviceDepth >> 3)) >> 2;
+ int i,j;
+
+ for (i=0; i < (dispDeviceRect[3] - dispDeviceRect[1]); i++)
+ {
+ unsigned int *ptr = base;
+ for(j = width; j > 0; j -= 8) {
+ __asm__ __volatile__ ("dcbst 0,%0" :: "r" (ptr));
+ ptr += 8;
+ }
+ base += (dispDeviceRowBytes >> 2);
}
+ __asm__ __volatile__ ("sync" ::: "memory");
}
+void btext_flushline(void)
+{
+ unsigned int *base = (unsigned int *)calc_base(0, g_loc_Y << 4);
+ unsigned long width = ((dispDeviceRect[2] - dispDeviceRect[0]) *
+ (dispDeviceDepth >> 3)) >> 2;
+ int i,j;
+
+ for (i=0; i < 16; i++)
+ {
+ unsigned int *ptr = base;
+ for(j = width; j > 0; j -= 8) {
+ __asm__ __volatile__ ("dcbst 0,%0" :: "r" (ptr));
+ ptr += 8;
+ }
+ base += (dispDeviceRowBytes >> 2);
+ }
+ __asm__ __volatile__ ("sync" ::: "memory");
+}
+
+
#ifndef NO_SCROLL
static void scrollscreen(void)
{
- unsigned long *src = (unsigned long *)calc_base(0,16);
- unsigned long *dst = (unsigned long *)calc_base(0,0);
+ unsigned int *src = (unsigned int *)calc_base(0,16);
+ unsigned int *dst = (unsigned int *)calc_base(0,0);
unsigned long width = ((dispDeviceRect[2] - dispDeviceRect[0]) *
- (dispDeviceDepth >> 3)) >> 3;
+ (dispDeviceDepth >> 3)) >> 2;
int i,j;
for (i=0; i<(dispDeviceRect[3] - dispDeviceRect[1] - 16); i++)
{
- unsigned long *src_ptr = src;
- unsigned long *dst_ptr = dst;
+ unsigned int *src_ptr = src;
+ unsigned int *dst_ptr = dst;
for(j=width; j; --j)
*(dst_ptr++) = *(src_ptr++);
- src += (dispDeviceRowBytes >> 3);
- dst += (dispDeviceRowBytes >> 3);
+ src += (dispDeviceRowBytes >> 2);
+ dst += (dispDeviceRowBytes >> 2);
}
for (i=0; i<16; i++)
{
- unsigned long *dst_ptr = dst;
+ unsigned int *dst_ptr = dst;
for(j=width; j; --j)
*(dst_ptr++) = 0;
- dst += (dispDeviceRowBytes >> 3);
+ dst += (dispDeviceRowBytes >> 2);
}
}
#endif /* ndef NO_SCROLL */
@@ -377,6 +425,14 @@ void btext_drawstring(const char *c)
btext_drawchar(*c++);
}
+void btext_drawtext(const char *c, unsigned int len)
+{
+ if (!boot_text_mapped)
+ return;
+ while (len--)
+ btext_drawchar(*c++);
+}
+
void btext_drawhex(unsigned long v)
{
char *hex_table = "0123456789abcdef";
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index ccdf94731e3..fdd34dbd879 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -153,6 +153,9 @@ __after_mmu_off:
bl flush_tlbs
bl initial_bats
+#if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT)
+ bl setup_disp_bat
+#endif
/*
* Call setup_cpu for CPU 0 and initialize 6xx Idle
@@ -1306,6 +1309,32 @@ initial_bats:
blr
+#if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT)
+setup_disp_bat:
+ /*
+ * setup the display bat prepared for us in prom.c
+ */
+ mflr r8
+ bl reloc_offset
+ mtlr r8
+ addis r8,r3,disp_BAT@ha
+ addi r8,r8,disp_BAT@l
+ cmpwi cr0,r8,0
+ beqlr
+ lwz r11,0(r8)
+ lwz r8,4(r8)
+ mfspr r9,SPRN_PVR
+ rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */
+ cmpwi 0,r9,1
+ beq 1f
+ mtspr SPRN_DBAT3L,r8
+ mtspr SPRN_DBAT3U,r11
+ blr
+1: mtspr SPRN_IBAT3L,r8
+ mtspr SPRN_IBAT3U,r11
+ blr
+#endif /* !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) */
+
#ifdef CONFIG_8260
/* Jump into the system reset for the rom.
* We first disable the MMU, and then jump to the ROM reset address.
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 02baacf0436..79d434fc14d 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -40,6 +40,7 @@
#include <asm/xmon.h>
#include <asm/time.h>
#include <asm/serial.h>
+#include <asm/udbg.h>
#include "setup.h"
@@ -173,12 +174,23 @@ void __init platform_init(void)
*/
void __init machine_init(unsigned long dt_ptr, unsigned long phys)
{
+ /* If btext is enabled, we might have a BAT setup for early display,
+ * thus we do enable some very basic udbg output
+ */
+#ifdef CONFIG_BOOTX_TEXT
+ udbg_putc = btext_drawchar;
+#endif
+
+ /* Do some early initialization based on the flat device tree */
early_init_devtree(__va(dt_ptr));
+ /* Check default command line */
#ifdef CONFIG_CMDLINE
- strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line));
+ if (cmd_line[0] == 0)
+ strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line));
#endif /* CONFIG_CMDLINE */
+ /* Base init based on machine type */
platform_init();
#ifdef CONFIG_6xx
@@ -294,21 +306,11 @@ void __init setup_arch(char **cmdline_p)
smp_setup_cpu_maps();
-#ifdef CONFIG_BOOTX_TEXT
- init_boot_display();
-#endif
-
-#ifdef CONFIG_PPC_PMAC
- /* This could be called "early setup arch", it must be done
- * now because xmon need it
- */
- if (_machine == _MACH_Pmac)
- pmac_feature_init(); /* New cool way */
-#endif
-
#ifdef CONFIG_XMON_DEFAULT
xmon_init(1);
#endif
+ /* Register early console */
+ register_early_udbg_console();
#if defined(CONFIG_KGDB)
if (ppc_md.kgdb_map_scc)
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 0fc442ad1d2..65603e9af98 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -474,10 +474,6 @@ void __init setup_system(void)
*/
finish_device_tree();
-#ifdef CONFIG_BOOTX_TEXT
- init_boot_display();
-#endif
-
/*
* Initialize xmon
*/
diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c
index 2e372477d22..cc2df5e61bb 100644
--- a/arch/powerpc/kernel/udbg.c
+++ b/arch/powerpc/kernel/udbg.c
@@ -16,8 +16,8 @@
#include <linux/console.h>
#include <asm/processor.h>
-void (*udbg_putc)(unsigned char c);
-unsigned char (*udbg_getc)(void);
+void (*udbg_putc)(char c);
+char (*udbg_getc)(void);
int (*udbg_getc_poll)(void);
/* udbg library, used by xmon et al */
@@ -78,7 +78,7 @@ int udbg_read(char *buf, int buflen)
#define UDBG_BUFSIZE 256
void udbg_printf(const char *fmt, ...)
{
- unsigned char buf[UDBG_BUFSIZE];
+ char buf[UDBG_BUFSIZE];
va_list args;
va_start(args, fmt);
@@ -116,6 +116,8 @@ void __init disable_early_printk(void)
/* called by setup_system */
void register_early_udbg_console(void)
{
+ if (early_console_initialized)
+ return;
early_console_initialized = 1;
register_console(&udbg_console);
}
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index 50fd376446c..28a58da5592 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -47,7 +47,7 @@ struct NS16550 {
static volatile struct NS16550 __iomem *udbg_comport;
-static void udbg_550_putc(unsigned char c)
+static void udbg_550_putc(char c)
{
if (udbg_comport) {
while ((in_8(&udbg_comport->lsr) & LSR_THRE) == 0)
@@ -69,7 +69,7 @@ static int udbg_550_getc_poll(void)
return -1;
}
-static unsigned char udbg_550_getc(void)
+static char udbg_550_getc(void)
{
if (udbg_comport) {
while ((in_8(&udbg_comport->lsr) & LSR_DR) == 0)
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 7d4b8b5f060..7d0d75c1184 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -188,6 +188,11 @@ void __init MMU_init(void)
if (ppc_md.progress)
ppc_md.progress("MMU:exit", 0x211);
+
+ /* From now on, btext is no longer BAT mapped if it was at all */
+#ifdef CONFIG_BOOTX_TEXT
+ btext_unmap();
+#endif
}
/* This is only called until mem_init is done. */
diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile
index c9df44fcf57..3e5370eeb1b 100644
--- a/arch/powerpc/platforms/powermac/Makefile
+++ b/arch/powerpc/platforms/powermac/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_NVRAM) += nvram.o
# ppc64 pmac doesn't define CONFIG_NVRAM but needs nvram stuff
obj-$(CONFIG_PPC64) += nvram.o
obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_PPC_MERGE) += udbg_scc.o udbg_adb.o
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index f6e22da2a5d..52a9d0c1b8b 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -2607,6 +2607,8 @@ found:
*/
static void __init probe_uninorth(void)
{
+ u32 *addrp;
+ phys_addr_t address;
unsigned long actrl;
/* Locate core99 Uni-N */
@@ -2616,20 +2618,23 @@ static void __init probe_uninorth(void)
uninorth_node = of_find_node_by_name(NULL, "u3");
uninorth_u3 = 1;
}
- if (uninorth_node && uninorth_node->n_addrs > 0) {
- unsigned long address = uninorth_node->addrs[0].address;
- uninorth_base = ioremap(address, 0x40000);
- uninorth_rev = in_be32(UN_REG(UNI_N_VERSION));
- if (uninorth_u3)
- u3_ht = ioremap(address + U3_HT_CONFIG_BASE, 0x1000);
- } else
- uninorth_node = NULL;
-
- if (!uninorth_node)
+ if (uninorth_node == NULL)
return;
- printk(KERN_INFO "Found %s memory controller & host bridge, revision: %d\n",
- uninorth_u3 ? "U3" : "UniNorth", uninorth_rev);
+ addrp = (u32 *)get_property(uninorth_node, "reg", NULL);
+ if (addrp == NULL)
+ return;
+ address = of_translate_address(uninorth_node, addrp);
+ if (address == 0)
+ return;
+ uninorth_base = ioremap(address, 0x40000);
+ uninorth_rev = in_be32(UN_REG(UNI_N_VERSION));
+ if (uninorth_u3)
+ u3_ht = ioremap(address + U3_HT_CONFIG_BASE, 0x1000);
+
+ printk(KERN_INFO "Found %s memory controller & host bridge,"
+ " revision: %d\n", uninorth_u3 ? "U3" : "UniNorth",
+ uninorth_rev);
printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base);
/* Set the arbitrer QAck delay according to what Apple does
@@ -2653,18 +2658,17 @@ static void __init probe_one_macio(const char *name, const char *compat, int typ
{
struct device_node* node;
int i;
- volatile u32 __iomem * base;
- u32* revp;
+ volatile u32 __iomem *base;
+ u32 *addrp, *revp;
+ phys_addr_t addr;
+ u64 size;
- node = find_devices(name);
- if (!node || !node->n_addrs)
- return;
- if (compat)
- do {
- if (device_is_compatible(node, compat))
- break;
- node = node->next;
- } while (node);
+ for (node = NULL; (node = of_find_node_by_name(node, name)) != NULL;) {
+ if (!compat)
+ break;
+ if (device_is_compatible(node, compat))
+ break;
+ }
if (!node)
return;
for(i=0; i<MAX_MACIO_CHIPS; i++) {
@@ -2673,14 +2677,28 @@ static void __init probe_one_macio(const char *name, const char *compat, int typ
if (macio_chips[i].of_node == node)
return;
}
+
if (i >= MAX_MACIO_CHIPS) {
printk(KERN_ERR "pmac_feature: Please increase MAX_MACIO_CHIPS !\n");
printk(KERN_ERR "pmac_feature: %s skipped\n", node->full_name);
return;
}
- base = ioremap(node->addrs[0].address, node->addrs[0].size);
+ addrp = of_get_pci_address(node, 0, &size);
+ if (addrp == NULL) {
+ printk(KERN_ERR "pmac_feature: %s: can't find base !\n",
+ node->full_name);
+ return;
+ }
+ addr = of_translate_address(node, addrp);
+ if (addr == 0) {
+ printk(KERN_ERR "pmac_feature: %s, can't translate base !\n",
+ node->full_name);
+ return;
+ }
+ base = ioremap(addr, (unsigned long)size);
if (!base) {
- printk(KERN_ERR "pmac_feature: Can't map mac-io chip !\n");
+ printk(KERN_ERR "pmac_feature: %s, can't map mac-io chip !\n",
+ node->full_name);
return;
}
if (type == macio_keylargo) {
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index f3f39e8e337..606e0ed1373 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -36,7 +36,7 @@
#ifdef DEBUG
#define DBG(x...) do {\
- printk(KERN_DEBUG "KW:" x); \
+ printk(KERN_DEBUG "low_i2c:" x); \
} while(0)
#else
#define DBG(x...)
@@ -342,7 +342,7 @@ static int keywest_low_i2c_func(struct low_i2c_host *host, u8 addr, u8 subaddr,
static void keywest_low_i2c_add(struct device_node *np)
{
struct low_i2c_host *host = find_low_i2c_host(NULL);
- u32 *psteps, *prate, steps, aoffset = 0;
+ u32 *psteps, *prate, *addrp, steps;
struct device_node *parent;
if (host == NULL) {
@@ -352,6 +352,16 @@ static void keywest_low_i2c_add(struct device_node *np)
}
memset(host, 0, sizeof(*host));
+ /* Apple is kind enough to provide a valid AAPL,address property
+ * on all i2c keywest nodes so far ... we would have to fallback
+ * to macio parsing if that wasn't the case
+ */
+ addrp = (u32 *)get_property(np, "AAPL,address", NULL);
+ if (addrp == NULL) {
+ printk(KERN_ERR "low_i2c: Can't find address for %s\n",
+ np->full_name);
+ return;
+ }
init_MUTEX(&host->mutex);
host->np = of_node_get(np);
psteps = (u32 *)get_property(np, "AAPL,address-step", NULL);
@@ -360,12 +370,10 @@ static void keywest_low_i2c_add(struct device_node *np)
steps >>= 1;
parent = of_get_parent(np);
host->num_channels = 1;
- if (parent && parent->name[0] == 'u') {
+ if (parent && parent->name[0] == 'u')
host->num_channels = 2;
- aoffset = 3;
- }
/* Select interface rate */
- host->speed = KW_I2C_MODE_100KHZ;
+ host->speed = KW_I2C_MODE_25KHZ;
prate = (u32 *)get_property(np, "AAPL,i2c-rate", NULL);
if (prate) switch(*prate) {
case 100:
@@ -379,9 +387,12 @@ static void keywest_low_i2c_add(struct device_node *np)
break;
}
+ printk(KERN_INFO "low_i2c: Bus %s found at 0x%08x, %d channels,"
+ " speed = %d KHz\n",
+ np->full_name, *addrp, host->num_channels, prate ? *prate : 25);
+
host->mode = pmac_low_i2c_mode_std;
- host->base = ioremap(np->addrs[0].address + aoffset,
- np->addrs[0].size);
+ host->base = ioremap((*addrp), 0x1000);
host->func = keywest_low_i2c_func;
}
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 90040c49494..ff78eeac10f 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -459,7 +459,7 @@ void __init pmac_pic_init(void)
mpic_setup_cascade(irqctrler2->intrs[0].line,
pmac_u3_cascade, mpic2);
}
-#if defined(CONFIG_XMON) && defined(CONFIG_PPC32)
+#ifdef CONFIG_XMON
{
struct device_node* pswitch;
int nmi_irq;
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 3b7a492d9b6..6ee620fe519 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -77,6 +77,7 @@
#include <asm/pmc.h>
#include <asm/mpic.h>
#include <asm/lmb.h>
+#include <asm/udbg.h>
#include "pmac.h"
@@ -322,16 +323,6 @@ void __init pmac_setup_arch(void)
l2cr_init();
#endif /* CONFIG_PPC32 */
-#ifdef CONFIG_PPC64
- /* Probe motherboard chipset */
- /* this is done earlier in setup_arch for 32-bit */
- pmac_feature_init();
-
- /* We can NAP */
- powersave_nap = 1;
- printk(KERN_INFO "Using native/NAP idle loop\n");
-#endif
-
#ifdef CONFIG_KGDB
zs_kgdb_hook(0);
#endif
@@ -622,13 +613,26 @@ static void __init pmac_init_early(void)
* and call ioremap
*/
hpte_init_native();
+#endif
- /* Init SCC */
- if (strstr(cmd_line, "sccdbg")) {
- sccdbg = 1;
- udbg_init_scc(NULL);
+ /* Enable early btext debug if requested */
+ if (strstr(cmd_line, "btextdbg")) {
+ udbg_adb_init_early();
+ register_early_udbg_console();
}
+ /* Probe motherboard chipset */
+ pmac_feature_init();
+
+ /* We can NAP */
+ powersave_nap = 1;
+ printk(KERN_INFO "Using native/NAP idle loop\n");
+
+ /* Initialize debug stuff */
+ udbg_scc_init(!!strstr(cmd_line, "sccdbg"));
+ udbg_adb_init(!!strstr(cmd_line, "btextdbg"));
+
+#ifdef CONFIG_PPC64
/* Setup interrupt mapping options */
ppc64_interrupt_controller = IC_OPEN_PIC;
@@ -638,19 +642,8 @@ static void __init pmac_init_early(void)
static void __init pmac_progress(char *s, unsigned short hex)
{
-#ifdef CONFIG_PPC64
- if (sccdbg) {
- udbg_puts(s);
- udbg_puts("\n");
- return;
- }
-#endif
-#ifdef CONFIG_BOOTX_TEXT
- if (boot_text_mapped) {
- btext_drawstring(s);
- btext_drawchar('\n');
- }
-#endif /* CONFIG_BOOTX_TEXT */
+ udbg_puts(s);
+ udbg_puts("\n");
}
/*
@@ -735,7 +728,8 @@ static int __init pmac_probe(int platform)
}
#ifdef CONFIG_PPC64
-static int pmac_probe_mode(struct pci_bus *bus)
+/* Move that to pci.c */
+static int pmac_pci_probe_mode(struct pci_bus *bus)
{
struct device_node *node = bus->sysdata;
@@ -771,7 +765,7 @@ struct machdep_calls __initdata pmac_md = {
.check_legacy_ioport = pmac_check_legacy_ioport,
.progress = pmac_progress,
#ifdef CONFIG_PPC64
- .pci_probe_mode = pmac_probe_mode,
+ .pci_probe_mode = pmac_pci_probe_mode,
.idle_loop = native_idle,
.enable_pmcs = power4_enable_pmcs,
#ifdef CONFIG_KEXEC
diff --git a/arch/powerpc/platforms/powermac/udbg_adb.c b/arch/powerpc/platforms/powermac/udbg_adb.c
new file mode 100644
index 00000000000..e51de55b2d6
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/udbg_adb.c
@@ -0,0 +1,218 @@
+#include <linux/config.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/bitops.h>
+#include <linux/ptrace.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/cuda.h>
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/page.h>
+#include <asm/xmon.h>
+#include <asm/prom.h>
+#include <asm/bootx.h>
+#include <asm/machdep.h>
+#include <asm/errno.h>
+#include <asm/pmac_feature.h>
+#include <asm/processor.h>
+#include <asm/delay.h>
+#include <asm/btext.h>
+#include <asm/time.h>
+#include <asm/udbg.h>
+
+/*
+ * This implementation is "special", it can "patch" the current
+ * udbg implementation and work on top of it. It must thus be
+ * initialized last
+ */
+
+static void (*udbg_adb_old_putc)(char c);
+static char (*udbg_adb_old_getc)(void);
+static int (*udbg_adb_old_getc_poll)(void);
+
+static enum {
+ input_adb_none,
+ input_adb_pmu,
+ input_adb_cuda,
+} input_type = input_adb_none;
+
+static int udbg_adb_use_btext;
+
+int xmon_wants_key, xmon_adb_keycode;
+
+static inline void udbg_adb_poll(void)
+{
+#ifdef CONFIG_ADB_PMU
+ if (input_type == input_adb_pmu)
+ pmu_poll_adb();
+#endif /* CONFIG_ADB_PMU */
+#ifdef CONFIG_ADB_CUDA
+ if (input_type == input_adb_cuda)
+ cuda_poll();
+#endif /* CONFIG_ADB_CUDA */
+}
+
+#ifdef CONFIG_BOOTX_TEXT
+static int xmon_adb_shiftstate;
+
+static unsigned char xmon_keytab[128] =
+ "asdfhgzxcv\000bqwer" /* 0x00 - 0x0f */
+ "yt123465=97-80]o" /* 0x10 - 0x1f */
+ "u[ip\rlj'k;\\,/nm." /* 0x20 - 0x2f */
+ "\t `\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */
+ "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */
+ "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */
+
+static unsigned char xmon_shift_keytab[128] =
+ "ASDFHGZXCV\000BQWER" /* 0x00 - 0x0f */
+ "YT!@#$^%+(&_*)}O" /* 0x10 - 0x1f */
+ "U{IP\rLJ\"K:|<?NM>" /* 0x20 - 0x2f */
+ "\t ~\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */
+ "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */
+ "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */
+
+static char udbg_adb_local_getc(void)
+{
+ int k, t, on;
+
+ xmon_wants_key = 1;
+ for (;;) {
+ xmon_adb_keycode = -1;
+ t = 0;
+ on = 0;
+ k = -1;
+ do {
+ if (--t < 0) {
+ on = 1 - on;
+ btext_drawchar(on? 0xdb: 0x20);
+ btext_drawchar('\b');
+ t = 200000;
+ }
+ udbg_adb_poll();
+ if (udbg_adb_old_getc_poll)
+ k = udbg_adb_old_getc_poll();
+ } while (k == -1 && xmon_adb_keycode == -1);
+ if (on)
+ btext_drawstring(" \b");
+ if (k != -1)
+ return k;
+ k = xmon_adb_keycode;
+
+ /* test for shift keys */
+ if ((k & 0x7f) == 0x38 || (k & 0x7f) == 0x7b) {
+ xmon_adb_shiftstate = (k & 0x80) == 0;
+ continue;
+ }
+ if (k >= 0x80)
+ continue; /* ignore up transitions */
+ k = (xmon_adb_shiftstate? xmon_shift_keytab: xmon_keytab)[k];
+ if (k != 0)
+ break;
+ }
+ xmon_wants_key = 0;
+ return k;
+}
+#endif /* CONFIG_BOOTX_TEXT */
+
+static char udbg_adb_getc(void)
+{
+#ifdef CONFIG_BOOTX_TEXT
+ if (udbg_adb_use_btext && input_type != input_adb_none)
+ return udbg_adb_local_getc();
+#endif
+ if (udbg_adb_old_getc)
+ return udbg_adb_old_getc();
+ return -1;
+}
+
+/* getc_poll() is not really used, unless you have the xmon-over modem
+ * hack that doesn't quite concern us here, thus we just poll the low level
+ * ADB driver to prevent it from timing out and call back the original poll
+ * routine.
+ */
+static int udbg_adb_getc_poll(void)
+{
+ udbg_adb_poll();
+
+ if (udbg_adb_old_getc_poll)
+ return udbg_adb_old_getc_poll();
+ return -1;
+}
+
+static void udbg_adb_putc(char c)
+{
+#ifdef CONFIG_BOOTX_TEXT
+ if (udbg_adb_use_btext)
+ btext_drawchar(c);
+#endif
+ if (udbg_adb_old_putc)
+ return udbg_adb_old_putc(c);
+}
+
+void udbg_adb_init_early(void)
+{
+#ifdef CONFIG_BOOTX_TEXT
+ if (btext_find_display(1) == 0) {
+ udbg_adb_use_btext = 1;
+ udbg_putc = udbg_adb_putc;
+ }
+#endif
+}
+
+int udbg_adb_init(int force_btext)
+{
+ struct device_node *np;
+
+ /* Capture existing callbacks */
+ udbg_adb_old_putc = udbg_putc;
+ udbg_adb_old_getc = udbg_getc;
+ udbg_adb_old_getc_poll = udbg_getc_poll;
+
+ /* Check if our early init was already called */
+ if (udbg_adb_old_putc == udbg_adb_putc ||
+ udbg_adb_old_putc == btext_drawchar)
+ udbg_adb_old_putc = NULL;
+
+ /* Set ours as output */
+ udbg_putc = udbg_adb_putc;
+ udbg_getc = udbg_adb_getc;
+ udbg_getc_poll = udbg_adb_getc_poll;
+
+#ifdef CONFIG_BOOTX_TEXT
+ /* Check if we should use btext output */
+ if (btext_find_display(force_btext) == 0)
+ udbg_adb_use_btext = 1;
+#endif
+
+ /* See if there is a keyboard in the device tree with a parent
+ * of type "adb". If not, we return a failure, but we keep the
+ * bext output set for now
+ */
+ for (np = NULL; (np = of_find_node_by_name(np, "keyboard")) != NULL;) {
+ struct device_node *parent = of_get_parent(np);
+ int found = (parent && !strcmp(parent->type, "adb") == 0);
+ of_node_put(parent);
+ if (found)
+ break;
+ }
+ if (np == NULL)
+ return -ENODEV;
+ of_node_put(np);
+
+#ifdef CONFIG_ADB_PMU
+ if (find_via_pmu())
+ input_type = input_adb_pmu;
+#endif
+#ifdef CONFIG_ADB_CUDA
+ if (find_via_cuda())
+ input_type = input_adb_cuda;
+#endif
+
+ /* Same as above: nothing found, keep btext set for output */
+ if (input_type == input_adb_none)
+ return -ENODEV;
+
+ return 0;
+}
diff --git a/arch/powerpc/kernel/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c
index 820c5355150..df6dec49c4c 100644
--- a/arch/powerpc/kernel/udbg_scc.c
+++ b/arch/powerpc/platforms/powermac/udbg_scc.c
@@ -25,7 +25,7 @@ extern void real_writeb(u8 data, volatile u8 __iomem *addr);
static volatile u8 __iomem *sccc;
static volatile u8 __iomem *sccd;
-static void udbg_scc_putc(unsigned char c)
+static void udbg_scc_putc(char c)
{
if (sccc) {
while ((in_8(sccc) & SCC_TXRDY) == 0)
@@ -47,7 +47,7 @@ static int udbg_scc_getc_poll(void)
return -1;
}
-static unsigned char udbg_scc_getc(void)
+static char udbg_scc_getc(void)
{
if (sccc) {
while ((in_8(sccc) & SCC_RXRDY) == 0)
@@ -67,38 +67,59 @@ static unsigned char scc_inittab[] = {
3, 0xc1, /* rx enable, 8 bits */
};
-void udbg_init_scc(struct device_node *np)
+void udbg_scc_init(int force_scc)
{
u32 *reg;
unsigned long addr;
+ struct device_node *stdout = NULL, *escc = NULL, *macio = NULL;
+ struct device_node *ch, *ch_def = NULL, *ch_a = NULL;
+ char *path;
int i, x;
- if (np == NULL)
- np = of_find_node_by_name(NULL, "escc");
- if (np == NULL || np->parent == NULL)
- return;
+ escc = of_find_node_by_name(NULL, "escc");
+ if (escc == NULL)
+ goto bail;
+ macio = of_get_parent(escc);
+ if (macio == NULL)
+ goto bail;
+ path = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
+ if (path != NULL)
+ stdout = of_find_node_by_path(path);
+ for (ch = NULL; (ch = of_get_next_child(escc, ch)) != NULL;) {
+ if (ch == stdout)
+ ch_def = of_node_get(ch);
+ if (strcmp(ch->name, "ch-a") == 0)
+ ch_a = of_node_get(ch);
+ }
+ if (ch_def == NULL && !force_scc)
+ goto bail;
+
+ ch = ch_def ? ch_def : ch_a;
- udbg_printf("found SCC...\n");
/* Get address within mac-io ASIC */
- reg = (u32 *)get_property(np, "reg", NULL);
+ reg = (u32 *)get_property(escc, "reg", NULL);
if (reg == NULL)
- return;
+ goto bail;
addr = reg[0];
- udbg_printf("local addr: %lx\n", addr);
+
/* Get address of mac-io PCI itself */
- reg = (u32 *)get_property(np->parent, "assigned-addresses", NULL);
+ reg = (u32 *)get_property(macio, "assigned-addresses", NULL);
if (reg == NULL)
- return;
+ goto bail;
addr += reg[2];
- udbg_printf("final addr: %lx\n", addr);
+
+ /* Lock the serial port */
+ pmac_call_feature(PMAC_FTR_SCC_ENABLE, ch,
+ PMAC_SCC_ASYNC | PMAC_SCC_FLAG_XMON, 1);
+
/* Setup for 57600 8N1 */
- addr += 0x20;
+ if (ch == ch_a)
+ addr += 0x20;
sccc = (volatile u8 * __iomem) ioremap(addr & PAGE_MASK, PAGE_SIZE) ;
sccc += addr & ~PAGE_MASK;
sccd = sccc + 0x10;
- udbg_printf("ioremap result sccc: %p\n", sccc);
mb();
for (i = 20000; i != 0; --i)
@@ -113,9 +134,17 @@ void udbg_init_scc(struct device_node *np)
udbg_getc_poll = udbg_scc_getc_poll;
udbg_puts("Hello World !\n");
+
+ bail:
+ of_node_put(macio);
+ of_node_put(escc);
+ of_node_put(stdout);
+ of_node_put(ch_def);
+ of_node_put(ch_a);
}
-static void udbg_real_scc_putc(unsigned char c)
+#ifdef CONFIG_PPC64
+static void udbg_real_scc_putc(char c)
{
while ((real_readb(sccc) & SCC_TXRDY) == 0)
;
@@ -133,3 +162,4 @@ void udbg_init_pmac_realmode(void)
udbg_getc = NULL;
udbg_getc_poll = NULL;
}
+#endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index cc0939d4cad..615ffb96105 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -61,7 +61,7 @@ extern void pSeries_find_serial_port(void);
int vtermno; /* virtual terminal# for udbg */
#define __ALIGNED__ __attribute__((__aligned__(sizeof(long))))
-static void udbg_hvsi_putc(unsigned char c)
+static void udbg_hvsi_putc(char c)
{
/* packet's seqno isn't used anyways */
uint8_t packet[] __ALIGNED__ = { 0xff, 5, 0, 0, c };
@@ -112,7 +112,7 @@ static int udbg_hvsi_getc_poll(void)
return ch;
}
-static unsigned char udbg_hvsi_getc(void)
+static char udbg_hvsi_getc(void)
{
int ch;
for (;;) {
@@ -128,7 +128,7 @@ static unsigned char udbg_hvsi_getc(void)
}
}
-static void udbg_putcLP(unsigned char c)
+static void udbg_putcLP(char c)
{
char buf[16];
unsigned long rc;
@@ -173,7 +173,7 @@ static int udbg_getc_pollLP(void)
return ch;
}
-static unsigned char udbg_getcLP(void)
+static char udbg_getcLP(void)
{
int ch;
for (;;) {
diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile
index b20312e5ed2..109d874ecfb 100644
--- a/arch/powerpc/xmon/Makefile
+++ b/arch/powerpc/xmon/Makefile
@@ -3,9 +3,5 @@
ifdef CONFIG_PPC64
EXTRA_CFLAGS += -mno-minimal-toc
endif
-
-obj-$(CONFIG_8xx) += start_8xx.o
-obj-$(CONFIG_6xx) += start_32.o
-obj-$(CONFIG_4xx) += start_32.o
-obj-$(CONFIG_PPC64) += start_64.o
-obj-y += xmon.o ppc-dis.o ppc-opc.o setjmp.o nonstdio.o
+obj-y += xmon.o ppc-dis.o ppc-opc.o setjmp.o start.o \
+ nonstdio.o
diff --git a/arch/powerpc/xmon/start_64.c b/arch/powerpc/xmon/start.c
index 712552c4f24..712552c4f24 100644
--- a/arch/powerpc/xmon/start_64.c
+++ b/arch/powerpc/xmon/start.c
diff --git a/arch/powerpc/xmon/start_32.c b/arch/powerpc/xmon/start_32.c
deleted file mode 100644
index c2464df4217..00000000000
--- a/arch/powerpc/xmon/start_32.c
+++ /dev/null
@@ -1,441 +0,0 @@
-/*
- * Copyright (C) 1996 Paul Mackerras.
- */
-#include <linux/config.h>
-#include <linux/string.h>
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/page.h>
-#include <linux/adb.h>
-#include <linux/pmu.h>
-#include <linux/cuda.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/bitops.h>
-#include <asm/xmon.h>
-#include <asm/prom.h>
-#include <asm/bootx.h>
-#include <asm/machdep.h>
-#include <asm/errno.h>
-#include <asm/pmac_feature.h>
-#include <asm/processor.h>
-#include <asm/delay.h>
-#include <asm/btext.h>
-#include <asm/time.h>
-#include "nonstdio.h"
-
-static volatile unsigned char __iomem *sccc, *sccd;
-unsigned int TXRDY, RXRDY, DLAB;
-
-static int use_serial;
-static int use_screen;
-static int via_modem;
-static int xmon_use_sccb;
-static struct device_node *channel_node;
-
-void buf_access(void)
-{
- if (DLAB)
- sccd[3] &= ~DLAB; /* reset DLAB */
-}
-
-extern int adb_init(void);
-
-#ifdef CONFIG_PPC_CHRP
-/*
- * This looks in the "ranges" property for the primary PCI host bridge
- * to find the physical address of the start of PCI/ISA I/O space.
- * It is basically a cut-down version of pci_process_bridge_OF_ranges.
- */
-static unsigned long chrp_find_phys_io_base(void)
-{
- struct device_node *node;
- unsigned int *ranges;
- unsigned long base = CHRP_ISA_IO_BASE;
- int rlen = 0;
- int np;
-
- node = find_devices("isa");
- if (node != NULL) {
- node = node->parent;
- if (node == NULL || node->type == NULL
- || strcmp(node->type, "pci") != 0)
- node = NULL;
- }
- if (node == NULL)
- node = find_devices("pci");
- if (node == NULL)
- return base;
-
- ranges = (unsigned int *) get_property(node, "ranges", &rlen);
- np = prom_n_addr_cells(node) + 5;
- while ((rlen -= np * sizeof(unsigned int)) >= 0) {
- if ((ranges[0] >> 24) == 1 && ranges[2] == 0) {
- /* I/O space starting at 0, grab the phys base */
- base = ranges[np - 3];
- break;
- }
- ranges += np;
- }
- return base;
-}
-#endif /* CONFIG_PPC_CHRP */
-
-void xmon_map_scc(void)
-{
-#ifdef CONFIG_PPC_MULTIPLATFORM
- volatile unsigned char __iomem *base;
-
- if (_machine == _MACH_Pmac) {
- struct device_node *np;
- unsigned long addr;
-#ifdef CONFIG_BOOTX_TEXT
- if (!use_screen && !use_serial
- && !machine_is_compatible("iMac")) {
- /* see if there is a keyboard in the device tree
- with a parent of type "adb" */
- for (np = find_devices("keyboard"); np; np = np->next)
- if (np->parent && np->parent->type
- && strcmp(np->parent->type, "adb") == 0)
- break;
-
- /* needs to be hacked if xmon_printk is to be used
- from within find_via_pmu() */
-#ifdef CONFIG_ADB_PMU
- if (np != NULL && boot_text_mapped && find_via_pmu())
- use_screen = 1;
-#endif
-#ifdef CONFIG_ADB_CUDA
- if (np != NULL && boot_text_mapped && find_via_cuda())
- use_screen = 1;
-#endif
- }
- if (!use_screen && (np = find_devices("escc")) != NULL) {
- /*
- * look for the device node for the serial port
- * we're using and see if it says it has a modem
- */
- char *name = xmon_use_sccb? "ch-b": "ch-a";
- char *slots;
- int l;
-
- np = np->child;
- while (np != NULL && strcmp(np->name, name) != 0)
- np = np->sibling;
- if (np != NULL) {
- /* XXX should parse this properly */
- channel_node = np;
- slots = get_property(np, "slot-names", &l);
- if (slots != NULL && l >= 10
- && strcmp(slots+4, "Modem") == 0)
- via_modem = 1;
- }
- }
- btext_drawstring("xmon uses ");
- if (use_screen)
- btext_drawstring("screen and keyboard\n");
- else {
- if (via_modem)
- btext_drawstring("modem on ");
- btext_drawstring(xmon_use_sccb? "printer": "modem");
- btext_drawstring(" port\n");
- }
-
-#endif /* CONFIG_BOOTX_TEXT */
-
-#ifdef CHRP_ESCC
- addr = 0xc1013020;
-#else
- addr = 0xf3013020;
-#endif
- TXRDY = 4;
- RXRDY = 1;
-
- np = find_devices("mac-io");
- if (np && np->n_addrs)
- addr = np->addrs[0].address + 0x13020;
- base = (volatile unsigned char *) ioremap(addr & PAGE_MASK, PAGE_SIZE);
- sccc = base + (addr & ~PAGE_MASK);
- sccd = sccc + 0x10;
-
- } else {
- base = (volatile unsigned char *) isa_io_base;
-
-#ifdef CONFIG_PPC_CHRP
- if (_machine == _MACH_chrp)
- base = (volatile unsigned char __iomem *)
- ioremap(chrp_find_phys_io_base(), 0x1000);
-#endif
-
- sccc = base + 0x3fd;
- sccd = base + 0x3f8;
- if (xmon_use_sccb) {
- sccc -= 0x100;
- sccd -= 0x100;
- }
- TXRDY = 0x20;
- RXRDY = 1;
- DLAB = 0x80;
- }
-#elif defined(CONFIG_GEMINI)
- /* should already be mapped by the kernel boot */
- sccc = (volatile unsigned char __iomem *) 0xffeffb0d;
- sccd = (volatile unsigned char __iomem *) 0xffeffb08;
- TXRDY = 0x20;
- RXRDY = 1;
- DLAB = 0x80;
-#elif defined(CONFIG_405GP)
- sccc = (volatile unsigned char __iomem *)0xef600305;
- sccd = (volatile unsigned char __iomem *)0xef600300;
- TXRDY = 0x20;
- RXRDY = 1;
- DLAB = 0x80;
-#endif /* platform */
-}
-
-static int scc_initialized = 0;
-
-void xmon_init_scc(void);
-extern void cuda_poll(void);
-
-static inline void do_poll_adb(void)
-{
-#ifdef CONFIG_ADB_PMU
- if (sys_ctrler == SYS_CTRLER_PMU)
- pmu_poll_adb();
-#endif /* CONFIG_ADB_PMU */
-#ifdef CONFIG_ADB_CUDA
- if (sys_ctrler == SYS_CTRLER_CUDA)
- cuda_poll();
-#endif /* CONFIG_ADB_CUDA */
-}
-
-int xmon_write(void *ptr, int nb)
-{
- char *p = ptr;
- int i, c, ct;
-
-#ifdef CONFIG_SMP
- static unsigned long xmon_write_lock;
- int lock_wait = 1000000;
- int locked;
-
- while ((locked = test_and_set_bit(0, &xmon_write_lock)) != 0)
- if (--lock_wait == 0)
- break;
-#endif
-
-#ifdef CONFIG_BOOTX_TEXT
- if (use_screen) {
- /* write it on the screen */
- for (i = 0; i < nb; ++i)
- btext_drawchar(*p++);
- goto out;
- }
-#endif
- if (!scc_initialized)
- xmon_init_scc();
- ct = 0;
- for (i = 0; i < nb; ++i) {
- while ((*sccc & TXRDY) == 0)
- do_poll_adb();
- c = p[i];
- if (c == '\n' && !ct) {
- c = '\r';
- ct = 1;
- --i;
- } else {
- ct = 0;
- }
- buf_access();
- *sccd = c;
- eieio();
- }
-
- out:
-#ifdef CONFIG_SMP
- if (!locked)
- clear_bit(0, &xmon_write_lock);
-#endif
- return nb;
-}
-
-int xmon_wants_key;
-int xmon_adb_keycode;
-
-#ifdef CONFIG_BOOTX_TEXT
-static int xmon_adb_shiftstate;
-
-static unsigned char xmon_keytab[128] =
- "asdfhgzxcv\000bqwer" /* 0x00 - 0x0f */
- "yt123465=97-80]o" /* 0x10 - 0x1f */
- "u[ip\rlj'k;\\,/nm." /* 0x20 - 0x2f */
- "\t `\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */
- "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */
- "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */
-
-static unsigned char xmon_shift_keytab[128] =
- "ASDFHGZXCV\000BQWER" /* 0x00 - 0x0f */
- "YT!@#$^%+(&_*)}O" /* 0x10 - 0x1f */
- "U{IP\rLJ\"K:|<?NM>" /* 0x20 - 0x2f */
- "\t ~\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */
- "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */
- "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */
-
-static int xmon_get_adb_key(void)
-{
- int k, t, on;
-
- xmon_wants_key = 1;
- for (;;) {
- xmon_adb_keycode = -1;
- t = 0;
- on = 0;
- do {
- if (--t < 0) {
- on = 1 - on;
- btext_drawchar(on? 0xdb: 0x20);
- btext_drawchar('\b');
- t = 200000;
- }
- do_poll_adb();
- } while (xmon_adb_keycode == -1);
- k = xmon_adb_keycode;
- if (on)
- btext_drawstring(" \b");
-
- /* test for shift keys */
- if ((k & 0x7f) == 0x38 || (k & 0x7f) == 0x7b) {
- xmon_adb_shiftstate = (k & 0x80) == 0;
- continue;
- }
- if (k >= 0x80)
- continue; /* ignore up transitions */
- k = (xmon_adb_shiftstate? xmon_shift_keytab: xmon_keytab)[k];
- if (k != 0)
- break;
- }
- xmon_wants_key = 0;
- return k;
-}
-#endif /* CONFIG_BOOTX_TEXT */
-
-int xmon_readchar(void)
-{
-#ifdef CONFIG_BOOTX_TEXT
- if (use_screen)
- return xmon_get_adb_key();
-#endif
- if (!scc_initialized)
- xmon_init_scc();
- while ((*sccc & RXRDY) == 0)
- do_poll_adb();
- buf_access();
- return *sccd;
-}
-
-int xmon_read_poll(void)
-{
- if ((*sccc & RXRDY) == 0) {
- do_poll_adb();
- return -1;
- }
- buf_access();
- return *sccd;
-}
-
-static unsigned char scc_inittab[] = {
- 13, 0, /* set baud rate divisor */
- 12, 1,
- 14, 1, /* baud rate gen enable, src=rtxc */
- 11, 0x50, /* clocks = br gen */
- 5, 0xea, /* tx 8 bits, assert DTR & RTS */
- 4, 0x46, /* x16 clock, 1 stop */
- 3, 0xc1, /* rx enable, 8 bits */
-};
-
-void xmon_init_scc(void)
-{
- if ( _machine == _MACH_chrp )
- {
- sccd[3] = 0x83; eieio(); /* LCR = 8N1 + DLAB */
- sccd[0] = 12; eieio(); /* DLL = 9600 baud */
- sccd[1] = 0; eieio();
- sccd[2] = 0; eieio(); /* FCR = 0 */
- sccd[3] = 3; eieio(); /* LCR = 8N1 */
- sccd[1] = 0; eieio(); /* IER = 0 */
- }
- else if ( _machine == _MACH_Pmac )
- {
- int i, x;
- unsigned long timeout;
-
- if (channel_node != 0)
- pmac_call_feature(
- PMAC_FTR_SCC_ENABLE,
- channel_node,
- PMAC_SCC_ASYNC | PMAC_SCC_FLAG_XMON, 1);
- printk(KERN_INFO "Serial port locked ON by debugger !\n");
- if (via_modem && channel_node != 0) {
- unsigned int t0;
-
- pmac_call_feature(
- PMAC_FTR_MODEM_ENABLE,
- channel_node, 0, 1);
- printk(KERN_INFO "Modem powered up by debugger !\n");
- t0 = get_tbl();
- timeout = 3 * tb_ticks_per_sec;
- if (timeout == 0)
- /* assume 25MHz if tb_ticks_per_sec not set */
- timeout = 75000000;
- while (get_tbl() - t0 < timeout)
- eieio();
- }
- /* use the B channel if requested */
- if (xmon_use_sccb) {
- sccc = (volatile unsigned char *)
- ((unsigned long)sccc & ~0x20);
- sccd = sccc + 0x10;
- }
- for (i = 20000; i != 0; --i) {
- x = *sccc; eieio();
- }
- *sccc = 9; eieio(); /* reset A or B side */
- *sccc = ((unsigned long)sccc & 0x20)? 0x80: 0x40; eieio();
- for (i = 0; i < sizeof(scc_inittab); ++i) {
- *sccc = scc_inittab[i];
- eieio();
- }
- }
- scc_initialized = 1;
- if (via_modem) {
- for (;;) {
- xmon_write("ATE1V1\r", 7);
- if (xmon_expect("OK", 5)) {
- xmon_write("ATA\r", 4);
- if (xmon_expect("CONNECT", 40))
- break;
- }
- xmon_write("+++", 3);
- xmon_expect("OK", 3);
- }
- }
-}
-
-void xmon_enter(void)
-{
-#ifdef CONFIG_ADB_PMU
- if (_machine == _MACH_Pmac) {
- pmu_suspend();
- }
-#endif
-}
-
-void xmon_leave(void)
-{
-#ifdef CONFIG_ADB_PMU
- if (_machine == _MACH_Pmac) {
- pmu_resume();
- }
-#endif
-}
diff --git a/arch/powerpc/xmon/start_8xx.c b/arch/powerpc/xmon/start_8xx.c
deleted file mode 100644
index 4c17b0486ad..00000000000
--- a/arch/powerpc/xmon/start_8xx.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright (C) 1996 Paul Mackerras.
- * Copyright (C) 2000 Dan Malek.
- * Quick hack of Paul's code to make XMON work on 8xx processors. Lots
- * of assumptions, like the SMC1 is used, it has been initialized by the
- * loader at some point, and we can just stuff and suck bytes.
- * We rely upon the 8xx uart driver to support us, as the interface
- * changes between boot up and operational phases of the kernel.
- */
-#include <linux/string.h>
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/page.h>
-#include <linux/kernel.h>
-#include <asm/8xx_immap.h>
-#include <asm/mpc8xx.h>
-#include <asm/commproc.h>
-#include "nonstdio.h"
-
-extern int xmon_8xx_write(char *str, int nb);
-extern int xmon_8xx_read_poll(void);
-extern int xmon_8xx_read_char(void);
-
-void xmon_map_scc(void)
-{
- cpmp = (cpm8xx_t *)&(((immap_t *)IMAP_ADDR)->im_cpm);
-}
-
-void xmon_init_scc(void);
-
-int xmon_write(void *ptr, int nb)
-{
- return(xmon_8xx_write(ptr, nb));
-}
-
-int xmon_readchar(void)
-{
- return xmon_8xx_read_char();
-}
-
-int xmon_read_poll(void)
-{
- return(xmon_8xx_read_poll());
-}
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
index 0eb0b7085e6..e707c6f6e61 100644
--- a/arch/ppc/kernel/setup.c
+++ b/arch/ppc/kernel/setup.c
@@ -744,6 +744,9 @@ void __init setup_arch(char **cmdline_p)
/* so udelay does something sensible, assume <= 1000 bogomips */
loops_per_jiffy = 500000000 / HZ;
+ if (ppc_md.init_early)
+ ppc_md.init_early();
+
#ifdef CONFIG_PPC_MULTIPLATFORM
/* This could be called "early setup arch", it must be done
* now because xmon need it
diff --git a/drivers/i2c/busses/i2c-keywest.c b/drivers/i2c/busses/i2c-keywest.c
index d61f748278f..93e7080e3bc 100644
--- a/drivers/i2c/busses/i2c-keywest.c
+++ b/drivers/i2c/busses/i2c-keywest.c
@@ -505,16 +505,23 @@ static int
create_iface(struct device_node *np, struct device *dev)
{
unsigned long steps;
- unsigned bsteps, tsize, i, nchan, addroffset;
+ unsigned bsteps, tsize, i, nchan;
struct keywest_iface* iface;
- u32 *psteps, *prate;
+ u32 *psteps, *prate, *addrp;
int rc;
- if (np->n_intrs < 1 || np->n_addrs < 1) {
- printk(KERN_ERR "%s: Missing interrupt or address !\n",
+ if (np->n_intrs < 1) {
+ printk(KERN_ERR "%s: Missing interrupt !\n",
np->full_name);
return -ENODEV;
}
+ addrp = (u32 *)get_property(np, "AAPL,address", NULL);
+ if (addrp == NULL) {
+ printk(KERN_ERR "%s: Can't find address !\n",
+ np->full_name);
+ return -ENODEV;
+ }
+
if (pmac_low_i2c_lock(np))
return -ENODEV;
@@ -525,13 +532,10 @@ create_iface(struct device_node *np, struct device *dev)
for (bsteps = 0; (steps & 0x01) == 0; bsteps++)
steps >>= 1;
- if (np->parent->name[0] == 'u') {
+ if (np->parent->name[0] == 'u')
nchan = 2;
- addroffset = 3;
- } else {
- addroffset = 0;
+ else
nchan = 1;
- }
tsize = sizeof(struct keywest_iface) +
(sizeof(struct keywest_chan) + 4) * nchan;
@@ -550,8 +554,7 @@ create_iface(struct device_node *np, struct device *dev)
iface->irq = np->intrs[0].line;
iface->channels = (struct keywest_chan *)
(((unsigned long)(iface + 1) + 3UL) & ~3UL);
- iface->base = ioremap(np->addrs[0].address + addroffset,
- np->addrs[0].size);
+ iface->base = ioremap(*addrp, 0x1000);
if (!iface->base) {
printk(KERN_ERR "i2c-keywest: can't map inteface !\n");
kfree(iface);
diff --git a/drivers/macintosh/via-cuda.c b/drivers/macintosh/via-cuda.c
index d843a6c9c6d..18ff770ea66 100644
--- a/drivers/macintosh/via-cuda.c
+++ b/drivers/macintosh/via-cuda.c
@@ -127,39 +127,34 @@ struct adb_driver via_cuda_driver = {
#endif /* CONFIG_ADB */
#ifdef CONFIG_PPC
-int __init
-find_via_cuda(void)
+int __init find_via_cuda(void)
{
- int err;
struct adb_request req;
+ phys_addr_t taddr;
+ u32 *reg;
+ int err;
if (vias != 0)
return 1;
- vias = find_devices("via-cuda");
+ vias = of_find_node_by_name(NULL, "via-cuda");
if (vias == 0)
return 0;
- if (vias->next != 0)
- printk(KERN_WARNING "Warning: only using 1st via-cuda\n");
-
-#if 0
- { int i;
-
- printk("find_via_cuda: node = %p, addrs =", vias->node);
- for (i = 0; i < vias->n_addrs; ++i)
- printk(" %x(%x)", vias->addrs[i].address, vias->addrs[i].size);
- printk(", intrs =");
- for (i = 0; i < vias->n_intrs; ++i)
- printk(" %x", vias->intrs[i].line);
- printk("\n"); }
-#endif
- if (vias->n_addrs != 1 || vias->n_intrs != 1) {
- printk(KERN_ERR "via-cuda: expecting 1 address (%d) and 1 interrupt (%d)\n",
- vias->n_addrs, vias->n_intrs);
- if (vias->n_addrs < 1 || vias->n_intrs < 1)
- return 0;
+ reg = (u32 *)get_property(vias, "reg", NULL);
+ if (reg == NULL) {
+ printk(KERN_ERR "via-cuda: No \"reg\" property !\n");
+ goto fail;
+ }
+ taddr = of_translate_address(vias, reg);
+ if (taddr == 0) {
+ printk(KERN_ERR "via-cuda: Can't translate address !\n");
+ goto fail;
+ }
+ via = ioremap(taddr, 0x2000);
+ if (via == NULL) {
+ printk(KERN_ERR "via-cuda: Can't map address !\n");
+ goto fail;
}
- via = ioremap(vias->addrs->address, 0x2000);
cuda_state = idle;
sys_ctrler = SYS_CTRLER_CUDA;
@@ -185,6 +180,11 @@ find_via_cuda(void)
cuda_poll();
return 1;
+
+ fail:
+ of_node_put(vias);
+ vias = NULL;
+ return 0;
}
#endif /* CONFIG_PPC */
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index 56404350856..13881f19960 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -147,6 +147,7 @@ static struct device_node *vias;
static int pmu_kind = PMU_UNKNOWN;
static int pmu_fully_inited = 0;
static int pmu_has_adb;
+static struct device_node *gpio_node;
static unsigned char __iomem *gpio_reg = NULL;
static int gpio_irq = -1;
static int gpio_irq_enabled = -1;
@@ -295,22 +296,26 @@ static struct backlight_controller pmu_backlight_controller = {
};
#endif /* CONFIG_PMAC_BACKLIGHT */
-int
-find_via_pmu(void)
+int __init find_via_pmu(void)
{
+ phys_addr_t taddr;
+ u32 *reg;
+
if (via != 0)
return 1;
- vias = find_devices("via-pmu");
- if (vias == 0)
+ vias = of_find_node_by_name(NULL, "via-pmu");
+ if (vias == NULL)
return 0;
- if (vias->next != 0)
- printk(KERN_WARNING "Warning: only using 1st via-pmu\n");
- if (vias->n_addrs < 1 || vias->n_intrs < 1) {
- printk(KERN_ERR "via-pmu: %d addresses, %d interrupts!\n",
- vias->n_addrs, vias->n_intrs);
- if (vias->n_addrs < 1 || vias->n_intrs < 1)
- return 0;
+ reg = (u32 *)get_property(vias, "reg", NULL);
+ if (reg == NULL) {
+ printk(KERN_ERR "via-pmu: No \"reg\" property !\n");
+ goto fail;
+ }
+ taddr = of_translate_address(vias, reg);
+ if (taddr == 0) {
+ printk(KERN_ERR "via-pmu: Can't translate address !\n");
+ goto fail;
}
spin_lock_init(&pmu_lock);
@@ -331,7 +336,8 @@ find_via_pmu(void)
pmu_kind = PMU_HEATHROW_BASED;
else if (device_is_compatible(vias->parent, "Keylargo")
|| device_is_compatible(vias->parent, "K2-Keylargo")) {
- struct device_node *gpio, *gpiop;
+ struct device_node *gpiop;
+ phys_addr_t gaddr = 0;
pmu_kind = PMU_KEYLARGO_BASED;
pmu_has_adb = (find_type_devices("adb") != NULL);
@@ -341,19 +347,24 @@ find_via_pmu(void)
PMU_INT_TICK |
PMU_INT_ENVIRONMENT;
- gpiop = find_devices("gpio");
- if (gpiop && gpiop->n_addrs) {
- gpio_reg = ioremap(gpiop->addrs->address, 0x10);
- gpio = find_devices("extint-gpio1");
- if (gpio == NULL)
- gpio = find_devices("pmu-interrupt");
- if (gpio && gpio->parent == gpiop && gpio->n_intrs)
- gpio_irq = gpio->intrs[0].line;
+ gpiop = of_find_node_by_name(NULL, "gpio");
+ if (gpiop) {
+ reg = (u32 *)get_property(gpiop, "reg", NULL);
+ if (reg)
+ gaddr = of_translate_address(gpiop, reg);
+ if (gaddr != 0)
+ gpio_reg = ioremap(gaddr, 0x10);
}
+ if (gpio_reg == NULL)
+ printk(KERN_ERR "via-pmu: Can't find GPIO reg !\n");
} else
pmu_kind = PMU_UNKNOWN;
- via = ioremap(vias->addrs->address, 0x2000);
+ via = ioremap(taddr, 0x2000);
+ if (via == NULL) {
+ printk(KERN_ERR "via-pmu: Can't map address !\n");
+ goto fail;
+ }
out_8(&via[IER], IER_CLR | 0x7f); /* disable all intrs */
out_8(&via[IFR], 0x7f); /* clear IFR */
@@ -371,17 +382,19 @@ find_via_pmu(void)
sys_ctrler = SYS_CTRLER_PMU;
return 1;
+ fail:
+ of_node_put(vias);
+ vias = NULL;
+ return 0;
}
#ifdef CONFIG_ADB
-static int
-pmu_probe(void)
+static int pmu_probe(void)
{
return vias == NULL? -ENODEV: 0;
}
-static int __init
-pmu_init(void)
+static int __init pmu_init(void)
{
if (vias == NULL)
return -ENODEV;
@@ -405,7 +418,7 @@ static int __init via_pmu_start(void)
bright_req_2.complete = 1;
batt_req.complete = 1;
-#if defined(CONFIG_PPC32) && !defined(CONFIG_PPC_MERGE)
+#ifndef CONFIG_PPC_MERGE
if (pmu_kind == PMU_KEYLARGO_BASED)
openpic_set_irq_priority(vias->intrs[0].line,
OPENPIC_PRIORITY_DEFAULT + 1);
@@ -418,10 +431,22 @@ static int __init via_pmu_start(void)
return -EAGAIN;
}
- if (pmu_kind == PMU_KEYLARGO_BASED && gpio_irq != -1) {
- if (request_irq(gpio_irq, gpio1_interrupt, 0, "GPIO1 ADB", (void *)0))
- printk(KERN_ERR "pmu: can't get irq %d (GPIO1)\n", gpio_irq);
- gpio_irq_enabled = 1;
+ if (pmu_kind == PMU_KEYLARGO_BASED) {
+ gpio_node = of_find_node_by_name(NULL, "extint-gpio1");
+ if (gpio_node == NULL)
+ gpio_node = of_find_node_by_name(NULL,
+ "pmu-interrupt");
+ if (gpio_node && gpio_node->n_intrs > 0)
+ gpio_irq = gpio_node->intrs[0].line;
+
+ if (gpio_irq != -1) {
+ if (request_irq(gpio_irq, gpio1_interrupt, 0,
+ "GPIO1 ADB", (void *)0))
+ printk(KERN_ERR "pmu: can't get irq %d"
+ " (GPIO1)\n", gpio_irq);
+ else
+ gpio_irq_enabled = 1;
+ }
}
/* Enable interrupts */
@@ -1371,7 +1396,6 @@ next:
}
pmu_done(req);
} else {
-#if defined(CONFIG_XMON) && !defined(CONFIG_PPC64)
if (len == 4 && data[1] == 0x2c) {
extern int xmon_wants_key, xmon_adb_keycode;
if (xmon_wants_key) {
@@ -1379,7 +1403,6 @@ next:
return;
}
}
-#endif /* defined(CONFIG_XMON) && !defined(CONFIG_PPC64) */
#ifdef CONFIG_ADB
/*
* XXX On the [23]400 the PMU gives us an up
diff --git a/include/asm-powerpc/btext.h b/include/asm-powerpc/btext.h
index 71cce36bc63..906f46e3100 100644
--- a/include/asm-powerpc/btext.h
+++ b/include/asm-powerpc/btext.h
@@ -7,21 +7,22 @@
#define __PPC_BTEXT_H
#ifdef __KERNEL__
-extern void btext_clearscreen(void);
-extern void btext_flushscreen(void);
-
-extern int boot_text_mapped;
-
-extern int btext_initialize(struct device_node *np);
-
-extern void map_boot_text(void);
-extern void init_boot_display(void);
+extern int btext_find_display(int allow_nonstdout);
extern void btext_update_display(unsigned long phys, int width, int height,
int depth, int pitch);
+extern void btext_setup_display(int width, int height, int depth, int pitch,
+ unsigned long address);
+extern void btext_prepare_BAT(void);
+extern void btext_unmap(void);
extern void btext_drawchar(char c);
extern void btext_drawstring(const char *str);
extern void btext_drawhex(unsigned long v);
+extern void btext_drawtext(const char *c, unsigned int len);
+
+extern void btext_clearscreen(void);
+extern void btext_flushscreen(void);
+extern void btext_flushline(void);
#endif /* __KERNEL__ */
#endif /* __PPC_BTEXT_H */
diff --git a/include/asm-powerpc/udbg.h b/include/asm-powerpc/udbg.h
index 4049a96dc43..8d6b44c8f35 100644
--- a/include/asm-powerpc/udbg.h
+++ b/include/asm-powerpc/udbg.h
@@ -13,8 +13,8 @@
#include <linux/compiler.h>
#include <linux/init.h>
-extern void (*udbg_putc)(unsigned char c);
-extern unsigned char (*udbg_getc)(void);
+extern void (*udbg_putc)(char c);
+extern char (*udbg_getc)(void);
extern int (*udbg_getc_poll)(void);
extern void udbg_puts(const char *s);
@@ -30,5 +30,8 @@ extern unsigned int udbg_probe_uart_speed(void __iomem *comport,
unsigned int clock);
struct device_node;
-extern void udbg_init_scc(struct device_node *np);
+extern void udbg_scc_init(int force_scc);
+extern int udbg_adb_init(int force_btext);
+extern void udbg_adb_init_early(void);
+
#endif /* _ASM_POWERPC_UDBG_H */
diff --git a/include/asm-ppc/btext.h b/include/asm-ppc/btext.h
index ccaefabe0bf..ed3630251b3 100644
--- a/include/asm-ppc/btext.h
+++ b/include/asm-ppc/btext.h
@@ -17,7 +17,7 @@ extern unsigned long disp_BAT[2];
extern boot_infos_t disp_bi;
extern int boot_text_mapped;
-extern void init_boot_display(void);
+extern void btext_init(boot_infos_t *bi);
extern void btext_welcome(void);
extern void btext_prepare_BAT(void);
extern void btext_setup_display(int width, int height, int depth, int pitch,
diff --git a/include/asm-ppc/machdep.h b/include/asm-ppc/machdep.h
index f01255bd1dc..39200def8d1 100644
--- a/include/asm-ppc/machdep.h
+++ b/include/asm-ppc/machdep.h
@@ -35,8 +35,10 @@ struct machdep_calls {
int (*get_irq)(struct pt_regs *);
/* A general init function, called by ppc_init in init/main.c.
- May be NULL. */
+ May be NULL. DEPRECATED ! */
void (*init)(void);
+ /* For compatibility with merged platforms */
+ void (*init_early)(void);
void (*restart)(char *cmd);
void (*power_off)(void);