diff options
| author | Kalle Valo <kalle.valo@nokia.com> | 2008-12-18 23:35:27 +0200 |
|---|---|---|
| committer | John W. Linville <linville@tuxdriver.com> | 2008-12-19 15:24:00 -0500 |
| commit | 520eb82076993b7f55ef9b80771d264272e5127b (patch) | |
| tree | f98b74dbe404d4c3a55b5f649c25ca24958e62ba /include/net | |
| parent | ce7c9111a97492d04c504f40736a669c235d664a (diff) | |
| download | kernel-crypto-520eb82076993b7f55ef9b80771d264272e5127b.tar.gz kernel-crypto-520eb82076993b7f55ef9b80771d264272e5127b.tar.xz kernel-crypto-520eb82076993b7f55ef9b80771d264272e5127b.zip | |
mac80211: implement dynamic power save
This patch implements dynamic power save for mac80211. Basically it
means enabling power save mode after an idle period. Implementing it
dynamically gives a good compromise of low power consumption and low
latency. Some hardware have support for this in firmware, but some
require the host to do it.
The dynamic power save is implemented by adding an timeout to
ieee80211_subif_start_xmit(). The timeout can be enabled from userspace
with Wireless Extensions. For example, the command below enables the
dynamic power save and sets the time timeout to 500 ms:
iwconfig wlan0 power timeout 500m
Power save now only works with devices which handle power save in firmware.
It's also disabled by default and the heuristics when and how to enable is
considered as a policy decision and will be left for the userspace to handle.
In case the firmware has support for this, drivers can disable this feature
with IEEE80211_HW_NO_STACK_DYNAMIC_PS.
Big thanks to Johannes Berg for the help with the design and code.
Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'include/net')
| -rw-r--r-- | include/net/mac80211.h | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 9428d3e2f11..b3bd00a9d99 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -854,6 +854,11 @@ enum ieee80211_tkip_key_type { * * @IEEE80211_HW_AMPDU_AGGREGATION: * Hardware supports 11n A-MPDU aggregation. + * + * @IEEE80211_HW_NO_STACK_DYNAMIC_PS: + * Hardware which has dynamic power save support, meaning + * that power save is enabled in idle periods, and don't need support + * from stack. */ enum ieee80211_hw_flags { IEEE80211_HW_RX_INCLUDES_FCS = 1<<1, @@ -866,6 +871,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_NOISE_DBM = 1<<8, IEEE80211_HW_SPECTRUM_MGMT = 1<<9, IEEE80211_HW_AMPDU_AGGREGATION = 1<<10, + IEEE80211_HW_NO_STACK_DYNAMIC_PS = 1<<11, }; /** |