Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits)
  Input: use full RCU API
  Input: remove tsdev interface
  Input: add support for Blackfin BF54x Keypad controller
  Input: appletouch - another fix for idle reset logic
  HWMON: hdaps - switch to using input-polldev
  Input: add support for SEGA Dreamcast keyboard
  Input: omap-keyboard - don't pretend we support changing keymap
  Input: lifebook - fix X and Y axis range
  Input: usbtouchscreen - add support for GeneralTouch devices
  Input: fix open count handling in input interfaces
  Input: keyboard - add CapsShift lock
  Input: adbhid - produce all CapsLock key events
  Input: ALPS - add signature for ThinkPad R61
  Input: jornada720_kbd - send MSC_SCAN events
  Input: add support for the HP Jornada 7xx (710/720/728) touchscreen
  Input: add support for HP Jornada 7xx onboard keyboard
  Input: add support for HP Jornada onboard keyboard (HP6XX)
  Input: ucb1400_ts - use schedule_timeout_uninterruptible
  Input: xpad - fix dependancy on LEDS class
  Input: auto-select INPUT for MAC_EMUMOUSEBTN option
  ...

Resolved conflicts manually in drivers/hwmon/applesmc.c: converting from
a class device to a device and converting to use input-polldev created a
few apparently trivial clashes..

3 files changed, 110 insertions, 11 deletions

diff --git a/include/linux/gpio_keys.h b/include/linux/gpio_keys.h
index 265d17830a0..c6d3a9de563 100644
--- a/include/linux/gpio_keys.h
+++ b/include/linux/gpio_keys.h
@@ -8,6 +8,7 @@ struct gpio_keys_button {
 	int active_low;
 	char *desc;
 	int type;		/* input event type (EV_KEY, EV_SW) */
+	int wakeup;		/* configure the button as a wake-up source */
 };
 
 struct gpio_keys_platform_data {
diff --git a/include/linux/input.h b/include/linux/input.h
index 52d1bd434a5..f30da6fc08e 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -856,7 +856,7 @@ struct ff_rumble_effect {
  *	defining effect parameters
  *
  * This structure is sent through ioctl from the application to the driver.
- * To create a new effect aplication should set its @id to -1; the kernel
+ * To create a new effect application should set its @id to -1; the kernel
  * will return assigned @id which can later be used to update or delete
  * this effect.
  *
@@ -936,9 +936,82 @@ struct ff_effect {
 #define BIT(x)	(1UL<<((x)%BITS_PER_LONG))
 #define LONG(x) ((x)/BITS_PER_LONG)
 
+/**
+ * struct input_dev - represents an input device
+ * @name: name of the device
+ * @phys: physical path to the device in the system hierarchy
+ * @uniq: unique identification code for the device (if device has it)
+ * @id: id of the device (struct input_id)
+ * @evbit: bitmap of types of events supported by the device (EV_KEY,
+ *	EV_REL, etc.)
+ * @keybit: bitmap of keys/buttons this device has
+ * @relbit: bitmap of relative axes for the device
+ * @absbit: bitmap of absolute axes for the device
+ * @mscbit: bitmap of miscellaneous events supported by the device
+ * @ledbit: bitmap of leds present on the device
+ * @sndbit: bitmap of sound effects supported by the device
+ * @ffbit: bitmap of force feedback effects supported by the device
+ * @swbit: bitmap of switches present on the device
+ * @keycodemax: size of keycode table
+ * @keycodesize: size of elements in keycode table
+ * @keycode: map of scancodes to keycodes for this device
+ * @setkeycode: optional method to alter current keymap, used to implement
+ *	sparse keymaps. If not supplied default mechanism will be used
+ * @getkeycode: optional method to retrieve current keymap. If not supplied
+ *	default mechanism will be used
+ * @ff: force feedback structure associated with the device if device
+ *	supports force feedback effects
+ * @repeat_key: stores key code of the last key pressed; used to implement
+ *	software autorepeat
+ * @timer: timer for software autorepeat
+ * @sync: set to 1 when there were no new events since last EV_SYNC
+ * @abs: current values for reports from absolute axes
+ * @rep: current values for autorepeat parameters (delay, rate)
+ * @key: reflects current state of device's keys/buttons
+ * @led: reflects current state of device's LEDs
+ * @snd: reflects current state of sound effects
+ * @sw: reflects current state of device's switches
+ * @absmax: maximum values for events coming from absolute axes
+ * @absmin: minimum values for events coming from absolute axes
+ * @absfuzz: describes noisiness for axes
+ * @absflat: size of the center flat position (used by joydev)
+ * @open: this method is called when the very first user calls
+ *	input_open_device(). The driver must prepare the device
+ *	to start generating events (start polling thread,
+ *	request an IRQ, submit URB, etc.)
+ * @close: this method is called when the very last user calls
+ *	input_close_device().
+ * @flush: purges the device. Most commonly used to get rid of force
+ *	feedback effects loaded into the device when disconnecting
+ *	from it
+ * @event: event handler for events sent _to_ the device, like EV_LED
+ *	or EV_SND. The device is expected to carry out the requested
+ *	action (turn on a LED, play sound, etc.) The call is protected
+ *	by @event_lock and must not sleep
+ * @grab: input handle that currently has the device grabbed (via
+ *	EVIOCGRAB ioctl). When a handle grabs a device it becomes sole
+ *	recipient for all input events coming from the device
+ * @event_lock: this spinlock is is taken when input core receives
+ *	and processes a new event for the device (in input_event()).
+ *	Code that accesses and/or modifies parameters of a device
+ *	(such as keymap or absmin, absmax, absfuzz, etc.) after device
+ *	has been registered with input core must take this lock.
+ * @mutex: serializes calls to open(), close() and flush() methods
+ * @users: stores number of users (input handlers) that opened this
+ *	device. It is used by input_open_device() and input_close_device()
+ *	to make sure that dev->open() is only called when the first
+ *	user opens device and dev->close() is called when the very
+ *	last user closes the device
+ * @going_away: marks devices that are in a middle of unregistering and
+ *	causes input_open_device*() fail with -ENODEV.
+ * @dev: driver model's view of this device
+ * @h_list: list of input handles associated with the device. When
+ *	accessing the list dev->mutex must be held
+ * @node: used to place the device onto input_dev_list
+ */
 struct input_dev {
 
-	void *private;
+	void *private;	/* do not use */
 
 	const char *name;
 	const char *phys;
@@ -966,8 +1039,6 @@ struct input_dev {
 	unsigned int repeat_key;
 	struct timer_list timer;
 
-	int state;
-
 	int sync;
 
 	int abs[ABS_MAX + 1];
@@ -990,8 +1061,11 @@ struct input_dev {
 
 	struct input_handle *grab;
 
-	struct mutex mutex;	/* serializes open and close operations */
+	spinlock_t event_lock;
+	struct mutex mutex;
+
 	unsigned int users;
+	int going_away;
 
 	struct device dev;
 	union {			/* temporarily so while we switching to struct device */
@@ -1057,7 +1131,9 @@ struct input_handle;
 /**
  * struct input_handler - implements one of interfaces for input devices
  * @private: driver-specific data
- * @event: event handler
+ * @event: event handler. This method is being called by input core with
+ *	interrupts disabled and dev->event_lock spinlock held and so
+ *	it may not sleep
  * @connect: called when attaching a handler to an input device
  * @disconnect: disconnects a handler from input device
  * @start: starts handler for given handle. This function is called by
@@ -1069,10 +1145,18 @@ struct input_handle;
  * @name: name of the handler, to be shown in /proc/bus/input/handlers
  * @id_table: pointer to a table of input_device_ids this driver can
  *	handle
- * @blacklist: prointer to a table of input_device_ids this driver should
+ * @blacklist: pointer to a table of input_device_ids this driver should
  *	ignore even if they match @id_table
  * @h_list: list of input handles associated with the handler
  * @node: for placing the driver onto input_handler_list
+ *
+ * Input handlers attach to input devices and create input handles. There
+ * are likely several handlers attached to any given input device at the
+ * same time. All of them will get their copy of input event generated by
+ * the device.
+ *
+ * Note that input core serializes calls to connect() and disconnect()
+ * methods.
  */
 struct input_handler {
 
@@ -1094,6 +1178,18 @@ struct input_handler {
 	struct list_head	node;
 };
 
+/**
+ * struct input_handle - links input device with an input handler
+ * @private: handler-specific data
+ * @open: counter showing whether the handle is 'open', i.e. should deliver
+ *	events from its device
+ * @name: name given to the handle by handler that created it
+ * @dev: input device the handle is attached to
+ * @handler: handler that works with the device through this handle
+ * @d_node: used to put the handle on device's list of attached handles
+ * @h_node: used to put the handle on handler's list of handles from which
+ *	it gets events
+ */
 struct input_handle {
 
 	void *private;
@@ -1136,10 +1232,10 @@ static inline void input_set_drvdata(struct input_dev *dev, void *data)
 	dev->private = data;
 }
 
-int input_register_device(struct input_dev *);
+int __must_check input_register_device(struct input_dev *);
 void input_unregister_device(struct input_dev *);
 
-int input_register_handler(struct input_handler *);
+int __must_check input_register_handler(struct input_handler *);
 void input_unregister_handler(struct input_handler *);
 
 int input_register_handle(struct input_handle *);
@@ -1216,7 +1312,7 @@ extern struct class input_class;
  * @max_effects: maximum number of effects supported by device
  * @effects: pointer to an array of effects currently loaded into device
  * @effect_owners: array of effect owners; when file handle owning
- *	an effect gets closed the effcet is automatically erased
+ *	an effect gets closed the effect is automatically erased
  *
  * Every force-feedback device must implement upload() and playback()
  * methods; erase() is optional. set_gain() and set_autocenter() need
diff --git a/include/linux/keyboard.h b/include/linux/keyboard.h
index 7ddbc30aa8e..33b5c2e325b 100644
--- a/include/linux/keyboard.h
+++ b/include/linux/keyboard.h
@@ -416,6 +416,7 @@ extern unsigned short plain_map[NR_KEYS];
 #define K_SHIFTRLOCK	K(KT_LOCK,KG_SHIFTR)
 #define K_CTRLLLOCK	K(KT_LOCK,KG_CTRLL)
 #define K_CTRLRLOCK	K(KT_LOCK,KG_CTRLR)
+#define K_CAPSSHIFTLOCK	K(KT_LOCK,KG_CAPSSHIFT)
 
 #define K_SHIFT_SLOCK	K(KT_SLOCK,KG_SHIFT)
 #define K_CTRL_SLOCK	K(KT_SLOCK,KG_CTRL)
@@ -425,8 +426,9 @@ extern unsigned short plain_map[NR_KEYS];
 #define K_SHIFTR_SLOCK	K(KT_SLOCK,KG_SHIFTR)
 #define K_CTRLL_SLOCK	K(KT_SLOCK,KG_CTRLL)
 #define K_CTRLR_SLOCK	K(KT_SLOCK,KG_CTRLR)
+#define K_CAPSSHIFT_SLOCK	K(KT_SLOCK,KG_CAPSSHIFT)
 
-#define NR_LOCK		8
+#define NR_LOCK		9
 
 #define K_BRL_BLANK     K(KT_BRL, 0)
 #define K_BRL_DOT1      K(KT_BRL, 1)