diff options
| author | Philip Langdale <philipl@overt.org> | 2006-10-29 10:14:19 +0100 |
|---|---|---|
| committer | Pierre Ossman <drzeus@drzeus.cx> | 2006-12-01 18:22:44 +0100 |
| commit | e45a1bd20fa5b920901879e85cdf5eda21f78d7c (patch) | |
| tree | d767af9df9ae4b39e9bd3675b1644fa5eaccd325 /include/linux/mmc | |
| parent | bce40a36de574376f41f1ff3c4d212a7da2a3c90 (diff) | |
| download | kernel-crypto-e45a1bd20fa5b920901879e85cdf5eda21f78d7c.tar.gz kernel-crypto-e45a1bd20fa5b920901879e85cdf5eda21f78d7c.tar.xz kernel-crypto-e45a1bd20fa5b920901879e85cdf5eda21f78d7c.zip | |
mmc: Add support for mmc v4 wide-bus modes
This change adds support for the mmc4 4-bit wide-bus mode.
The mmc4 spec defines 8-bit and 4-bit transfer modes. As we do not support
any 8-bit hardware, this patch only adds support for the 4-bit mode, but
it can easily be built upon when the time comes.
The 4-bit mode is electrically compatible with SD's 4-bit mode but the
procedure for turning it on is different. This patch implements only
the essential parts of the procedure as defined by the spec. Two additional
steps are recommended but not compulsory. I am documenting them here so
that there's a record.
1) A bus-test mechanism is implemented using dedicated mmc commands which allow
for testing the functionality of the data bus at the electrical level. This is
pretty paranoid and they way the commands work is not compatible with the mmc
subsystem (they don't set valid CRC values).
2) MMC v4 cards can indicate they would like to draw more than the default
amount of current in wide-bus modes. We currently will never switch the card
into a higher draw mode. Supposedly, allowing the card to draw more current
will let it perform better, but the specs seem to indicate that the card will
function correctly without the mode change. Empirical testing supports this
interpretation.
Signed-off-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Diffstat (limited to 'include/linux/mmc')
| -rw-r--r-- | include/linux/mmc/protocol.h | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/include/linux/mmc/protocol.h b/include/linux/mmc/protocol.h index 311b6547f56..45c51fd8578 100644 --- a/include/linux/mmc/protocol.h +++ b/include/linux/mmc/protocol.h @@ -256,6 +256,7 @@ struct _mmc_csd { * EXT_CSD fields */ +#define EXT_CSD_BUS_WIDTH 183 /* R/W */ #define EXT_CSD_HS_TIMING 185 /* R/W */ #define EXT_CSD_CARD_TYPE 196 /* RO */ @@ -270,6 +271,10 @@ struct _mmc_csd { #define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */ #define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */ +#define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ +#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ +#define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */ + /* * MMC_SWITCH access modes */ |