diff options
author | Sam Ravnborg <sam@ravnborg.org> | 2008-07-27 23:00:59 +0200 |
---|---|---|
committer | Sam Ravnborg <sam@ravnborg.org> | 2008-07-27 23:00:59 +0200 |
commit | a439fe51a1f8eb087c22dd24d69cebae4a3addac (patch) | |
tree | e32d1fa97a220ab598d8ab364205817c5bf2bd6f /include/asm-sparc/memreg.h | |
parent | 837b41b5de356aa67abb2cadb5eef3efc7776f91 (diff) | |
download | kernel-crypto-a439fe51a1f8eb087c22dd24d69cebae4a3addac.tar.gz kernel-crypto-a439fe51a1f8eb087c22dd24d69cebae4a3addac.tar.xz kernel-crypto-a439fe51a1f8eb087c22dd24d69cebae4a3addac.zip |
sparc, sparc64: use arch/sparc/include
The majority of this patch was created by the following script:
***
ASM=arch/sparc/include/asm
mkdir -p $ASM
git mv include/asm-sparc64/ftrace.h $ASM
git rm include/asm-sparc64/*
git mv include/asm-sparc/* $ASM
sed -ie 's/asm-sparc64/asm/g' $ASM/*
sed -ie 's/asm-sparc/asm/g' $ASM/*
***
The rest was an update of the top-level Makefile to use sparc
for header files when sparc64 is being build.
And a small fixlet to pick up the correct unistd.h from
sparc64 code.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Diffstat (limited to 'include/asm-sparc/memreg.h')
-rw-r--r-- | include/asm-sparc/memreg.h | 51 |
1 files changed, 0 insertions, 51 deletions
diff --git a/include/asm-sparc/memreg.h b/include/asm-sparc/memreg.h deleted file mode 100644 index 845ad2b3918..00000000000 --- a/include/asm-sparc/memreg.h +++ /dev/null @@ -1,51 +0,0 @@ -#ifndef _SPARC_MEMREG_H -#define _SPARC_MEMREG_H -/* memreg.h: Definitions of the values found in the synchronous - * and asynchronous memory error registers when a fault - * occurs on the sun4c. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -/* First the synchronous error codes, these are usually just - * normal page faults. - */ - -#define SUN4C_SYNC_WDRESET 0x0001 /* watchdog reset */ -#define SUN4C_SYNC_SIZE 0x0002 /* bad access size? whuz this? */ -#define SUN4C_SYNC_PARITY 0x0008 /* bad ram chips caused a parity error */ -#define SUN4C_SYNC_SBUS 0x0010 /* the SBUS had some problems... */ -#define SUN4C_SYNC_NOMEM 0x0020 /* translation to non-existent ram */ -#define SUN4C_SYNC_PROT 0x0040 /* access violated pte protections */ -#define SUN4C_SYNC_NPRESENT 0x0080 /* pte said that page was not present */ -#define SUN4C_SYNC_BADWRITE 0x8000 /* while writing something went bogus */ - -#define SUN4C_SYNC_BOLIXED \ - (SUN4C_SYNC_WDRESET | SUN4C_SYNC_SIZE | SUN4C_SYNC_SBUS | \ - SUN4C_SYNC_NOMEM | SUN4C_SYNC_PARITY) - -/* Now the asynchronous error codes, these are almost always produced - * by the cache writing things back to memory and getting a bad translation. - * Bad DVMA transactions can cause these faults too. - */ - -#define SUN4C_ASYNC_BADDVMA 0x0010 /* error during DVMA access */ -#define SUN4C_ASYNC_NOMEM 0x0020 /* write back pointed to bad phys addr */ -#define SUN4C_ASYNC_BADWB 0x0080 /* write back points to non-present page */ - -/* Memory parity error register with associated bit constants. */ -#ifndef __ASSEMBLY__ -extern __volatile__ unsigned long __iomem *sun4c_memerr_reg; -#endif - -#define SUN4C_MPE_ERROR 0x80 /* Parity error detected. (ro) */ -#define SUN4C_MPE_MULTI 0x40 /* Multiple parity errors detected. (ro) */ -#define SUN4C_MPE_TEST 0x20 /* Write inverse parity. (rw) */ -#define SUN4C_MPE_CHECK 0x10 /* Enable parity checking. (rw) */ -#define SUN4C_MPE_ERR00 0x08 /* Parity error in bits 0-7. (ro) */ -#define SUN4C_MPE_ERR08 0x04 /* Parity error in bits 8-15. (ro) */ -#define SUN4C_MPE_ERR16 0x02 /* Parity error in bits 16-23. (ro) */ -#define SUN4C_MPE_ERR24 0x01 /* Parity error in bits 24-31. (ro) */ -#define SUN4C_MPE_ERRS 0x0F /* Bit mask for the error bits. (ro) */ - -#endif /* !(_SPARC_MEMREG_H) */ |