[PATCH] rioboot: lindent

This is the result of indent -kr -i8 -bri0 -l255

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 704 insertions, 811 deletions

diff --git a/drivers/char/rio/rioboot.c b/drivers/char/rio/rioboot.c
index 92df43552f1..9a96fc644e5 100644
--- a/drivers/char/rio/rioboot.c
+++ b/drivers/char/rio/rioboot.c
@@ -80,149 +80,141 @@ static char *_rioboot_c_sccs_ = "@(#)rioboot.c	1.3";
 #include "cmdblk.h"
 #include "route.h"
 
-static int RIOBootComplete( struct rio_info *p, struct Host *HostP, uint Rup, struct PktCmd *PktCmdP );
-
-static uchar
-RIOAtVec2Ctrl[] =
-{
-	/* 0 */  INTERRUPT_DISABLE,
-	/* 1 */  INTERRUPT_DISABLE,
-	/* 2 */  INTERRUPT_DISABLE,
-	/* 3 */  INTERRUPT_DISABLE,
-	/* 4 */  INTERRUPT_DISABLE,
-	/* 5 */  INTERRUPT_DISABLE,
-	/* 6 */  INTERRUPT_DISABLE,
-	/* 7 */  INTERRUPT_DISABLE,
-	/* 8 */  INTERRUPT_DISABLE,
-	/* 9 */  IRQ_9|INTERRUPT_ENABLE,
+static int RIOBootComplete(struct rio_info *p, struct Host *HostP, uint Rup, struct PktCmd *PktCmdP);
+
+static uchar RIOAtVec2Ctrl[] = {
+	/* 0 */ INTERRUPT_DISABLE,
+	/* 1 */ INTERRUPT_DISABLE,
+	/* 2 */ INTERRUPT_DISABLE,
+	/* 3 */ INTERRUPT_DISABLE,
+	/* 4 */ INTERRUPT_DISABLE,
+	/* 5 */ INTERRUPT_DISABLE,
+	/* 6 */ INTERRUPT_DISABLE,
+	/* 7 */ INTERRUPT_DISABLE,
+	/* 8 */ INTERRUPT_DISABLE,
+	/* 9 */ IRQ_9 | INTERRUPT_ENABLE,
 	/* 10 */ INTERRUPT_DISABLE,
-	/* 11 */ IRQ_11|INTERRUPT_ENABLE,
-	/* 12 */ IRQ_12|INTERRUPT_ENABLE,
+	/* 11 */ IRQ_11 | INTERRUPT_ENABLE,
+	/* 12 */ IRQ_12 | INTERRUPT_ENABLE,
 	/* 13 */ INTERRUPT_DISABLE,
 	/* 14 */ INTERRUPT_DISABLE,
-	/* 15 */ IRQ_15|INTERRUPT_ENABLE
+	/* 15 */ IRQ_15 | INTERRUPT_ENABLE
 };
 
 /*
 ** Load in the RTA boot code.
 */
-int
-RIOBootCodeRTA(p, rbp)
-struct rio_info *	p;
-struct DownLoad *	rbp; 
+int RIOBootCodeRTA(p, rbp)
+struct rio_info *p;
+struct DownLoad *rbp;
 {
 	int offset;
 
-	func_enter ();
+	func_enter();
 
 	/* Linux doesn't allow you to disable interrupts during a
 	   "copyin". (Crash when a pagefault occurs). */
 	/* disable(oldspl); */
-	
-	rio_dprintk (RIO_DEBUG_BOOT, "Data at user address 0x%x\n",(int)rbp->DataP);
+
+	rio_dprintk(RIO_DEBUG_BOOT, "Data at user address 0x%x\n", (int) rbp->DataP);
 
 	/*
-	** Check that we have set asside enough memory for this
-	*/
-	if ( rbp->Count > SIXTY_FOUR_K ) {
-		rio_dprintk (RIO_DEBUG_BOOT, "RTA Boot Code Too Large!\n");
+	 ** Check that we have set asside enough memory for this
+	 */
+	if (rbp->Count > SIXTY_FOUR_K) {
+		rio_dprintk(RIO_DEBUG_BOOT, "RTA Boot Code Too Large!\n");
 		p->RIOError.Error = HOST_FILE_TOO_LARGE;
 		/* restore(oldspl); */
-		func_exit ();
+		func_exit();
 		return -ENOMEM;
 	}
 
-	if ( p->RIOBooting ) {
-		rio_dprintk (RIO_DEBUG_BOOT, "RTA Boot Code : BUSY BUSY BUSY!\n");
+	if (p->RIOBooting) {
+		rio_dprintk(RIO_DEBUG_BOOT, "RTA Boot Code : BUSY BUSY BUSY!\n");
 		p->RIOError.Error = BOOT_IN_PROGRESS;
 		/* restore(oldspl); */
-		func_exit ();
+		func_exit();
 		return -EBUSY;
 	}
 
 	/*
-	** The data we load in must end on a (RTA_BOOT_DATA_SIZE) byte boundary,
-	** so calculate how far we have to move the data up the buffer
-	** to achieve this.
-	*/
-	offset = (RTA_BOOT_DATA_SIZE - (rbp->Count % RTA_BOOT_DATA_SIZE)) % 
-							RTA_BOOT_DATA_SIZE;
+	 ** The data we load in must end on a (RTA_BOOT_DATA_SIZE) byte boundary,
+	 ** so calculate how far we have to move the data up the buffer
+	 ** to achieve this.
+	 */
+	offset = (RTA_BOOT_DATA_SIZE - (rbp->Count % RTA_BOOT_DATA_SIZE)) % RTA_BOOT_DATA_SIZE;
 
 	/*
-	** Be clean, and clear the 'unused' portion of the boot buffer,
-	** because it will (eventually) be part of the Rta run time environment
-	** and so should be zeroed.
-	*/
-	bzero( (caddr_t)p->RIOBootPackets, offset );
+	 ** Be clean, and clear the 'unused' portion of the boot buffer,
+	 ** because it will (eventually) be part of the Rta run time environment
+	 ** and so should be zeroed.
+	 */
+	bzero((caddr_t) p->RIOBootPackets, offset);
 
 	/*
-	** Copy the data from user space.
-	*/
+	 ** Copy the data from user space.
+	 */
 
-	if ( copyin((int)rbp->DataP,((caddr_t)(p->RIOBootPackets))+offset,
-				rbp->Count) ==COPYFAIL ) {
-		rio_dprintk (RIO_DEBUG_BOOT, "Bad data copy from user space\n");
+	if (copyin((int) rbp->DataP, ((caddr_t) (p->RIOBootPackets)) + offset, rbp->Count) == COPYFAIL) {
+		rio_dprintk(RIO_DEBUG_BOOT, "Bad data copy from user space\n");
 		p->RIOError.Error = COPYIN_FAILED;
 		/* restore(oldspl); */
-		func_exit ();
+		func_exit();
 		return -EFAULT;
 	}
 
 	/*
-	** Make sure that our copy of the size includes that offset we discussed
-	** earlier.
-	*/
-	p->RIONumBootPkts = (rbp->Count+offset)/RTA_BOOT_DATA_SIZE;
-	p->RIOBootCount   = rbp->Count;
+	 ** Make sure that our copy of the size includes that offset we discussed
+	 ** earlier.
+	 */
+	p->RIONumBootPkts = (rbp->Count + offset) / RTA_BOOT_DATA_SIZE;
+	p->RIOBootCount = rbp->Count;
 
 	/* restore(oldspl); */
 	func_exit();
 	return 0;
 }
 
-void rio_start_card_running (struct Host * HostP)
+void rio_start_card_running(struct Host *HostP)
 {
-	func_enter ();
+	func_enter();
 
-	switch ( HostP->Type ) {
+	switch (HostP->Type) {
 	case RIO_AT:
-		rio_dprintk (RIO_DEBUG_BOOT, "Start ISA card running\n");
-		WBYTE(HostP->Control, 
-		      BOOT_FROM_RAM | EXTERNAL_BUS_ON
-		      | HostP->Mode
-		      | RIOAtVec2Ctrl[HostP->Ivec & 0xF] );
+		rio_dprintk(RIO_DEBUG_BOOT, "Start ISA card running\n");
+		WBYTE(HostP->Control, BOOT_FROM_RAM | EXTERNAL_BUS_ON | HostP->Mode | RIOAtVec2Ctrl[HostP->Ivec & 0xF]);
 		break;
-		
+
 #ifdef FUTURE_RELEASE
 	case RIO_MCA:
-				/*
-				** MCA handles IRQ vectors differently, so we don't write 
-				** them to this register.
-				*/
-		rio_dprintk (RIO_DEBUG_BOOT, "Start MCA card running\n");
+		/*
+		 ** MCA handles IRQ vectors differently, so we don't write
+		 ** them to this register.
+		 */
+		rio_dprintk(RIO_DEBUG_BOOT, "Start MCA card running\n");
 		WBYTE(HostP->Control, McaTpBootFromRam | McaTpBusEnable | HostP->Mode);
 		break;
 
 	case RIO_EISA:
-				/*
-				** EISA is totally different and expects OUTBZs to turn it on.
-				*/
-		rio_dprintk (RIO_DEBUG_BOOT, "Start EISA card running\n");
-		OUTBZ( HostP->Slot, EISA_CONTROL_PORT, HostP->Mode | RIOEisaVec2Ctrl[HostP->Ivec] | EISA_TP_RUN | EISA_TP_BUS_ENABLE | EISA_TP_BOOT_FROM_RAM );
+		/*
+		 ** EISA is totally different and expects OUTBZs to turn it on.
+		 */
+		rio_dprintk(RIO_DEBUG_BOOT, "Start EISA card running\n");
+		OUTBZ(HostP->Slot, EISA_CONTROL_PORT, HostP->Mode | RIOEisaVec2Ctrl[HostP->Ivec] | EISA_TP_RUN | EISA_TP_BUS_ENABLE | EISA_TP_BOOT_FROM_RAM);
 		break;
 #endif
 
 	case RIO_PCI:
-				/*
-				** PCI is much the same as MCA. Everything is once again memory
-				** mapped, so we are writing to memory registers instead of io
-				** ports.
-				*/
-		rio_dprintk (RIO_DEBUG_BOOT, "Start PCI card running\n");
+		/*
+		 ** PCI is much the same as MCA. Everything is once again memory
+		 ** mapped, so we are writing to memory registers instead of io
+		 ** ports.
+		 */
+		rio_dprintk(RIO_DEBUG_BOOT, "Start PCI card running\n");
 		WBYTE(HostP->Control, PCITpBootFromRam | PCITpBusEnable | HostP->Mode);
 		break;
 	default:
-		rio_dprintk (RIO_DEBUG_BOOT, "Unknown host type %d\n", HostP->Type);
+		rio_dprintk(RIO_DEBUG_BOOT, "Unknown host type %d\n", HostP->Type);
 		break;
 	}
 /* 
@@ -239,9 +231,8 @@ void rio_start_card_running (struct Host * HostP)
 ** Put your rubber pants on before messing with this code - even the magic
 ** numbers have trouble understanding what they are doing here.
 */
-int
-RIOBootCodeHOST(p, rbp)
-struct rio_info *	p;
+int RIOBootCodeHOST(p, rbp)
+struct rio_info *p;
 register struct DownLoad *rbp;
 {
 	register struct Host *HostP;
@@ -254,355 +245,346 @@ register struct DownLoad *rbp;
 	BYTE *DestP;
 	int wait_count;
 	ushort OldParmMap;
-	ushort offset;	/* It is very important that this is a ushort */
+	ushort offset;		/* It is very important that this is a ushort */
 	/* uint byte; */
 	caddr_t DownCode = NULL;
 	unsigned long flags;
 
-	HostP = NULL; /* Assure the compiler we've initialized it */
-	for ( host=0; host<p->RIONumHosts; host++ ) {
-		rio_dprintk (RIO_DEBUG_BOOT, "Attempt to boot host %d\n",host);
+	HostP = NULL;		/* Assure the compiler we've initialized it */
+	for (host = 0; host < p->RIONumHosts; host++) {
+		rio_dprintk(RIO_DEBUG_BOOT, "Attempt to boot host %d\n", host);
 		HostP = &p->RIOHosts[host];
-		
-		rio_dprintk (RIO_DEBUG_BOOT,  "Host Type = 0x%x, Mode = 0x%x, IVec = 0x%x\n",
-		    HostP->Type, HostP->Mode, HostP->Ivec);
 
+		rio_dprintk(RIO_DEBUG_BOOT, "Host Type = 0x%x, Mode = 0x%x, IVec = 0x%x\n", HostP->Type, HostP->Mode, HostP->Ivec);
 
-		if ( (HostP->Flags & RUN_STATE) != RC_WAITING ) {
-			rio_dprintk (RIO_DEBUG_BOOT, "%s %d already running\n","Host",host);
+
+		if ((HostP->Flags & RUN_STATE) != RC_WAITING) {
+			rio_dprintk(RIO_DEBUG_BOOT, "%s %d already running\n", "Host", host);
 			continue;
 		}
 
 		/*
-		** Grab a 32 bit pointer to the card.
-		*/
+		 ** Grab a 32 bit pointer to the card.
+		 */
 		Cad = HostP->Caddr;
 
 		/*
-		** We are going to (try) and load in rbp->Count bytes.
-		** The last byte will reside at p->RIOConf.HostLoadBase-1;
-		** Therefore, we need to start copying at address
-		** (caddr+p->RIOConf.HostLoadBase-rbp->Count)
-		*/
-		StartP = (caddr_t)&Cad[p->RIOConf.HostLoadBase-rbp->Count];
-
-		rio_dprintk (RIO_DEBUG_BOOT, "kernel virtual address for host is 0x%x\n", (int)Cad );
-		rio_dprintk (RIO_DEBUG_BOOT, "kernel virtual address for download is 0x%x\n", (int)StartP);
-		rio_dprintk (RIO_DEBUG_BOOT, "host loadbase is 0x%x\n",p->RIOConf.HostLoadBase);
-		rio_dprintk (RIO_DEBUG_BOOT, "size of download is 0x%x\n", rbp->Count);
-
-		if ( p->RIOConf.HostLoadBase < rbp->Count ) {
-			rio_dprintk (RIO_DEBUG_BOOT, "Bin too large\n");
+		 ** We are going to (try) and load in rbp->Count bytes.
+		 ** The last byte will reside at p->RIOConf.HostLoadBase-1;
+		 ** Therefore, we need to start copying at address
+		 ** (caddr+p->RIOConf.HostLoadBase-rbp->Count)
+		 */
+		StartP = (caddr_t) & Cad[p->RIOConf.HostLoadBase - rbp->Count];
+
+		rio_dprintk(RIO_DEBUG_BOOT, "kernel virtual address for host is 0x%x\n", (int) Cad);
+		rio_dprintk(RIO_DEBUG_BOOT, "kernel virtual address for download is 0x%x\n", (int) StartP);
+		rio_dprintk(RIO_DEBUG_BOOT, "host loadbase is 0x%x\n", p->RIOConf.HostLoadBase);
+		rio_dprintk(RIO_DEBUG_BOOT, "size of download is 0x%x\n", rbp->Count);
+
+		if (p->RIOConf.HostLoadBase < rbp->Count) {
+			rio_dprintk(RIO_DEBUG_BOOT, "Bin too large\n");
 			p->RIOError.Error = HOST_FILE_TOO_LARGE;
-			func_exit ();
+			func_exit();
 			return -EFBIG;
 		}
 		/*
-		** Ensure that the host really is stopped.
-		** Disable it's external bus & twang its reset line.
-		*/
-		RIOHostReset( HostP->Type, (struct DpRam *)HostP->CardP, HostP->Slot );
+		 ** Ensure that the host really is stopped.
+		 ** Disable it's external bus & twang its reset line.
+		 */
+		RIOHostReset(HostP->Type, (struct DpRam *) HostP->CardP, HostP->Slot);
 
 		/*
-		** Copy the data directly from user space to the SRAM.
-		** This ain't going to be none too clever if the download
-		** code is bigger than this segment.
-		*/
-		rio_dprintk (RIO_DEBUG_BOOT, "Copy in code\n");
+		 ** Copy the data directly from user space to the SRAM.
+		 ** This ain't going to be none too clever if the download
+		 ** code is bigger than this segment.
+		 */
+		rio_dprintk(RIO_DEBUG_BOOT, "Copy in code\n");
 
 		/*
-		** PCI hostcard can't cope with 32 bit accesses and so need to copy 
-		** data to a local buffer, and then dripfeed the card.
-		*/
-		if ( HostP->Type == RIO_PCI ) {
-		  /* int offset; */
+		 ** PCI hostcard can't cope with 32 bit accesses and so need to copy
+		 ** data to a local buffer, and then dripfeed the card.
+		 */
+		if (HostP->Type == RIO_PCI) {
+			/* int offset; */
 
 			DownCode = sysbrk(rbp->Count);
-			if ( !DownCode ) {
-				rio_dprintk (RIO_DEBUG_BOOT, "No system memory available\n");
+			if (!DownCode) {
+				rio_dprintk(RIO_DEBUG_BOOT, "No system memory available\n");
 				p->RIOError.Error = NOT_ENOUGH_CORE_FOR_PCI_COPY;
-				func_exit ();
+				func_exit();
 				return -ENOMEM;
 			}
 			bzero(DownCode, rbp->Count);
 
-			if ( copyin((int)rbp->DataP,DownCode,rbp->Count)==COPYFAIL ) {
-				rio_dprintk (RIO_DEBUG_BOOT, "Bad copyin of host data\n");
-				sysfree( DownCode, rbp->Count );
+			if (copyin((int) rbp->DataP, DownCode, rbp->Count) == COPYFAIL) {
+				rio_dprintk(RIO_DEBUG_BOOT, "Bad copyin of host data\n");
+				sysfree(DownCode, rbp->Count);
 				p->RIOError.Error = COPYIN_FAILED;
-				func_exit ();
+				func_exit();
 				return -EFAULT;
 			}
 
-			HostP->Copy( DownCode, StartP, rbp->Count );
+			HostP->Copy(DownCode, StartP, rbp->Count);
 
-			sysfree( DownCode, rbp->Count );
-		}
-		else if ( copyin((int)rbp->DataP,StartP,rbp->Count)==COPYFAIL ) {
-			rio_dprintk (RIO_DEBUG_BOOT, "Bad copyin of host data\n");
+			sysfree(DownCode, rbp->Count);
+		} else if (copyin((int) rbp->DataP, StartP, rbp->Count) == COPYFAIL) {
+			rio_dprintk(RIO_DEBUG_BOOT, "Bad copyin of host data\n");
 			p->RIOError.Error = COPYIN_FAILED;
-			func_exit ();
+			func_exit();
 			return -EFAULT;
 		}
 
-		rio_dprintk (RIO_DEBUG_BOOT, "Copy completed\n");
+		rio_dprintk(RIO_DEBUG_BOOT, "Copy completed\n");
 
 		/*
-		**			S T O P !
-		**
-		** Upto this point the code has been fairly rational, and possibly
-		** even straight forward. What follows is a pile of crud that will
-		** magically turn into six bytes of transputer assembler. Normally
-		** you would expect an array or something, but, being me, I have
-		** chosen [been told] to use a technique whereby the startup code
-		** will be correct if we change the loadbase for the code. Which
-		** brings us onto another issue - the loadbase is the *end* of the
-		** code, not the start.
-		**
-		** If I were you I wouldn't start from here.
-		*/
+		 **                     S T O P !
+		 **
+		 ** Upto this point the code has been fairly rational, and possibly
+		 ** even straight forward. What follows is a pile of crud that will
+		 ** magically turn into six bytes of transputer assembler. Normally
+		 ** you would expect an array or something, but, being me, I have
+		 ** chosen [been told] to use a technique whereby the startup code
+		 ** will be correct if we change the loadbase for the code. Which
+		 ** brings us onto another issue - the loadbase is the *end* of the
+		 ** code, not the start.
+		 **
+		 ** If I were you I wouldn't start from here.
+		 */
 
 		/*
-		** We now need to insert a short boot section into
-		** the memory at the end of Sram2. This is normally (de)composed
-		** of the last eight bytes of the download code. The
-		** download has been assembled/compiled to expect to be
-		** loaded from 0x7FFF downwards. We have loaded it
-		** at some other address. The startup code goes into the small
-		** ram window at Sram2, in the last 8 bytes, which are really
-		** at addresses 0x7FF8-0x7FFF.
-		**
-		** If the loadbase is, say, 0x7C00, then we need to branch to
-		** address 0x7BFE to run the host.bin startup code. We assemble
-		** this jump manually.
-		**
-		** The two byte sequence 60 08 is loaded into memory at address
-		** 0x7FFE,F. This is a local branch to location 0x7FF8 (60 is nfix 0,
-		** which adds '0' to the .O register, complements .O, and then shifts
-		** it left by 4 bit positions, 08 is a jump .O+8 instruction. This will
-		** add 8 to .O (which was 0xFFF0), and will branch RELATIVE to the new
-		** location. Now, the branch starts from the value of .PC (or .IP or
-		** whatever the bloody register is called on this chip), and the .PC
-		** will be pointing to the location AFTER the branch, in this case
-		** .PC == 0x8000, so the branch will be to 0x8000+0xFFF8 = 0x7FF8.
-		**
-		** A long branch is coded at 0x7FF8. This consists of loading a four
-		** byte offset into .O using nfix (as above) and pfix operators. The
-		** pfix operates in exactly the same way as the nfix operator, but
-		** without the complement operation. The offset, of course, must be
-		** relative to the address of the byte AFTER the branch instruction,
-		** which will be (urm) 0x7FFC, so, our final destination of the branch
-		** (loadbase-2), has to be reached from here. Imagine that the loadbase
-		** is 0x7C00 (which it is), then we will need to branch to 0x7BFE (which
-		** is the first byte of the initial two byte short local branch of the
-		** download code).
-		**
-		** To code a jump from 0x7FFC (which is where the branch will start
-		** from) to 0x7BFE, we will need to branch 0xFC02 bytes (0x7FFC+0xFC02)=
-		** 0x7BFE.
-		** This will be coded as four bytes:
-		** 60 2C 20 02
-		** being nfix .O+0
-		**	   pfix .O+C
-		**	   pfix .O+0
-		**	   jump .O+2
-		**
-		** The nfix operator is used, so that the startup code will be
-		** compatible with the whole Tp family. (lies, damn lies, it'll never
-		** work in a month of Sundays).
-		**
-		** The nfix nyble is the 1s complement of the nyble value you
-		** want to load - in this case we wanted 'F' so we nfix loaded '0'.
-		*/
+		 ** We now need to insert a short boot section into
+		 ** the memory at the end of Sram2. This is normally (de)composed
+		 ** of the last eight bytes of the download code. The
+		 ** download has been assembled/compiled to expect to be
+		 ** loaded from 0x7FFF downwards. We have loaded it
+		 ** at some other address. The startup code goes into the small
+		 ** ram window at Sram2, in the last 8 bytes, which are really
+		 ** at addresses 0x7FF8-0x7FFF.
+		 **
+		 ** If the loadbase is, say, 0x7C00, then we need to branch to
+		 ** address 0x7BFE to run the host.bin startup code. We assemble
+		 ** this jump manually.
+		 **
+		 ** The two byte sequence 60 08 is loaded into memory at address
+		 ** 0x7FFE,F. This is a local branch to location 0x7FF8 (60 is nfix 0,
+		 ** which adds '0' to the .O register, complements .O, and then shifts
+		 ** it left by 4 bit positions, 08 is a jump .O+8 instruction. This will
+		 ** add 8 to .O (which was 0xFFF0), and will branch RELATIVE to the new
+		 ** location. Now, the branch starts from the value of .PC (or .IP or
+		 ** whatever the bloody register is called on this chip), and the .PC
+		 ** will be pointing to the location AFTER the branch, in this case
+		 ** .PC == 0x8000, so the branch will be to 0x8000+0xFFF8 = 0x7FF8.
+		 **
+		 ** A long branch is coded at 0x7FF8. This consists of loading a four
+		 ** byte offset into .O using nfix (as above) and pfix operators. The
+		 ** pfix operates in exactly the same way as the nfix operator, but
+		 ** without the complement operation. The offset, of course, must be
+		 ** relative to the address of the byte AFTER the branch instruction,
+		 ** which will be (urm) 0x7FFC, so, our final destination of the branch
+		 ** (loadbase-2), has to be reached from here. Imagine that the loadbase
+		 ** is 0x7C00 (which it is), then we will need to branch to 0x7BFE (which
+		 ** is the first byte of the initial two byte short local branch of the
+		 ** download code).
+		 **
+		 ** To code a jump from 0x7FFC (which is where the branch will start
+		 ** from) to 0x7BFE, we will need to branch 0xFC02 bytes (0x7FFC+0xFC02)=
+		 ** 0x7BFE.
+		 ** This will be coded as four bytes:
+		 ** 60 2C 20 02
+		 ** being nfix .O+0
+		 **        pfix .O+C
+		 **        pfix .O+0
+		 **        jump .O+2
+		 **
+		 ** The nfix operator is used, so that the startup code will be
+		 ** compatible with the whole Tp family. (lies, damn lies, it'll never
+		 ** work in a month of Sundays).
+		 **
+		 ** The nfix nyble is the 1s complement of the nyble value you
+		 ** want to load - in this case we wanted 'F' so we nfix loaded '0'.
+		 */
 
 
 		/*
-		** Dest points to the top 8 bytes of Sram2. The Tp jumps
-		** to 0x7FFE at reset time, and starts executing. This is
-		** a short branch to 0x7FF8, where a long branch is coded.
-		*/
+		 ** Dest points to the top 8 bytes of Sram2. The Tp jumps
+		 ** to 0x7FFE at reset time, and starts executing. This is
+		 ** a short branch to 0x7FF8, where a long branch is coded.
+		 */
 
-		DestP = (BYTE *)&Cad[0x7FF8];	/* <<<---- READ THE ABOVE COMMENTS */
+		DestP = (BYTE *) & Cad[0x7FF8];	/* <<<---- READ THE ABOVE COMMENTS */
 
 #define	NFIX(N)	(0x60 | (N))	/* .O  = (~(.O + N))<<4 */
 #define	PFIX(N)	(0x20 | (N))	/* .O  =   (.O + N)<<4  */
-#define	JUMP(N)	(0x00 | (N))	/* .PC =   .PC + .O	 */
+#define	JUMP(N)	(0x00 | (N))	/* .PC =   .PC + .O      */
 
 		/*
-		** 0x7FFC is the address of the location following the last byte of
-		** the four byte jump instruction.
-		** READ THE ABOVE COMMENTS
-		**
-		** offset is (TO-FROM) % MEMSIZE, but with compound buggering about.
-		** Memsize is 64K for this range of Tp, so offset is a short (unsigned,
-		** cos I don't understand 2's complement).
-		*/
-		offset = (p->RIOConf.HostLoadBase-2)-0x7FFC;
-		WBYTE( DestP[0] , NFIX(((ushort)(~offset) >> (ushort)12) & 0xF) );
-		WBYTE( DestP[1] , PFIX(( offset >> 8) & 0xF) );
-		WBYTE( DestP[2] , PFIX(( offset >> 4) & 0xF) );
-		WBYTE( DestP[3] , JUMP( offset & 0xF) );
-
-		WBYTE( DestP[6] , NFIX(0) );
-		WBYTE( DestP[7] , JUMP(8) );
-
-		rio_dprintk (RIO_DEBUG_BOOT, "host loadbase is 0x%x\n",p->RIOConf.HostLoadBase);
-		rio_dprintk (RIO_DEBUG_BOOT, "startup offset is 0x%x\n",offset);
+		 ** 0x7FFC is the address of the location following the last byte of
+		 ** the four byte jump instruction.
+		 ** READ THE ABOVE COMMENTS
+		 **
+		 ** offset is (TO-FROM) % MEMSIZE, but with compound buggering about.
+		 ** Memsize is 64K for this range of Tp, so offset is a short (unsigned,
+		 ** cos I don't understand 2's complement).
+		 */
+		offset = (p->RIOConf.HostLoadBase - 2) - 0x7FFC;
+		WBYTE(DestP[0], NFIX(((ushort) (~offset) >> (ushort) 12) & 0xF));
+		WBYTE(DestP[1], PFIX((offset >> 8) & 0xF));
+		WBYTE(DestP[2], PFIX((offset >> 4) & 0xF));
+		WBYTE(DestP[3], JUMP(offset & 0xF));
+
+		WBYTE(DestP[6], NFIX(0));
+		WBYTE(DestP[7], JUMP(8));
+
+		rio_dprintk(RIO_DEBUG_BOOT, "host loadbase is 0x%x\n", p->RIOConf.HostLoadBase);
+		rio_dprintk(RIO_DEBUG_BOOT, "startup offset is 0x%x\n", offset);
 
 		/*
-		** Flag what is going on
-		*/
+		 ** Flag what is going on
+		 */
 		HostP->Flags &= ~RUN_STATE;
 		HostP->Flags |= RC_STARTUP;
 
 		/*
-		** Grab a copy of the current ParmMap pointer, so we
-		** can tell when it has changed.
-		*/
+		 ** Grab a copy of the current ParmMap pointer, so we
+		 ** can tell when it has changed.
+		 */
 		OldParmMap = RWORD(HostP->__ParmMapR);
 
-		rio_dprintk (RIO_DEBUG_BOOT, "Original parmmap is 0x%x\n",OldParmMap);
+		rio_dprintk(RIO_DEBUG_BOOT, "Original parmmap is 0x%x\n", OldParmMap);
 
 		/*
-		** And start it running (I hope).
-		** As there is nothing dodgy or obscure about the
-		** above code, this is guaranteed to work every time.
-		*/
-		rio_dprintk (RIO_DEBUG_BOOT,  "Host Type = 0x%x, Mode = 0x%x, IVec = 0x%x\n",
-		    HostP->Type, HostP->Mode, HostP->Ivec);
+		 ** And start it running (I hope).
+		 ** As there is nothing dodgy or obscure about the
+		 ** above code, this is guaranteed to work every time.
+		 */
+		rio_dprintk(RIO_DEBUG_BOOT, "Host Type = 0x%x, Mode = 0x%x, IVec = 0x%x\n", HostP->Type, HostP->Mode, HostP->Ivec);
 
 		rio_start_card_running(HostP);
 
-		rio_dprintk (RIO_DEBUG_BOOT, "Set control port\n");
+		rio_dprintk(RIO_DEBUG_BOOT, "Set control port\n");
 
 		/*
-		** Now, wait for upto five seconds for the Tp to setup the parmmap
-		** pointer:
-		*/
-		for ( wait_count=0; (wait_count<p->RIOConf.StartupTime)&&
-			(RWORD(HostP->__ParmMapR)==OldParmMap); wait_count++ ) {
-			rio_dprintk (RIO_DEBUG_BOOT, "Checkout %d, 0x%x\n",wait_count,RWORD(HostP->__ParmMapR));
+		 ** Now, wait for upto five seconds for the Tp to setup the parmmap
+		 ** pointer:
+		 */
+		for (wait_count = 0; (wait_count < p->RIOConf.StartupTime) && (RWORD(HostP->__ParmMapR) == OldParmMap); wait_count++) {
+			rio_dprintk(RIO_DEBUG_BOOT, "Checkout %d, 0x%x\n", wait_count, RWORD(HostP->__ParmMapR));
 			delay(HostP, HUNDRED_MS);
 
 		}
 
 		/*
-		** If the parmmap pointer is unchanged, then the host code
-		** has crashed & burned in a really spectacular way
-		*/
-		if ( RWORD(HostP->__ParmMapR) == OldParmMap ) {
-			rio_dprintk (RIO_DEBUG_BOOT, "parmmap 0x%x\n", RWORD(HostP->__ParmMapR));
-			rio_dprintk (RIO_DEBUG_BOOT, "RIO Mesg Run Fail\n");
-
-#define	HOST_DISABLE \
-		HostP->Flags &= ~RUN_STATE; \
-		HostP->Flags |= RC_STUFFED; \
-		RIOHostReset( HostP->Type, (struct DpRam *)HostP->CardP, HostP->Slot );\
-		continue
-
-			HOST_DISABLE;
-		}
-
-		rio_dprintk (RIO_DEBUG_BOOT, "Running 0x%x\n", RWORD(HostP->__ParmMapR));
+		 ** If the parmmap pointer is unchanged, then the host code
+		 ** has crashed & burned in a really spectacular way
+		 */
+		if (RWORD(HostP->__ParmMapR) == OldParmMap) {
+			rio_dprintk(RIO_DEBUG_BOOT, "parmmap 0x%x\n", RWORD(HostP->__ParmMapR));
+			rio_dprintk(RIO_DEBUG_BOOT, "RIO Mesg Run Fail\n");
+			HostP->Flags &= ~RUN_STATE;
+			HostP->Flags |= RC_STUFFED;
+			RIOHostReset(HostP->Type, (struct DpRam *) HostP->CardP, HostP->Slot);
+		continue}
+
+		rio_dprintk(RIO_DEBUG_BOOT, "Running 0x%x\n", RWORD(HostP->__ParmMapR));
 
 		/*
-		** Well, the board thought it was OK, and setup its parmmap
-		** pointer. For the time being, we will pretend that this
-		** board is running, and check out what the error flag says.
-		*/
+		 ** Well, the board thought it was OK, and setup its parmmap
+		 ** pointer. For the time being, we will pretend that this
+		 ** board is running, and check out what the error flag says.
+		 */
 
 		/*
-		** Grab a 32 bit pointer to the parmmap structure
-		*/
-		ParmMapP = (PARM_MAP *)RIO_PTR(Cad,RWORD(HostP->__ParmMapR));
-		rio_dprintk (RIO_DEBUG_BOOT, "ParmMapP : %x\n", (int)ParmMapP);
-		ParmMapP = (PARM_MAP *)((unsigned long)Cad + 
-						(unsigned long)((RWORD((HostP->__ParmMapR))) & 0xFFFF)); 
-		rio_dprintk (RIO_DEBUG_BOOT, "ParmMapP : %x\n", (int)ParmMapP);
+		 ** Grab a 32 bit pointer to the parmmap structure
+		 */
+		ParmMapP = (PARM_MAP *) RIO_PTR(Cad, RWORD(HostP->__ParmMapR));
+		rio_dprintk(RIO_DEBUG_BOOT, "ParmMapP : %x\n", (int) ParmMapP);
+		ParmMapP = (PARM_MAP *) ((unsigned long) Cad + (unsigned long) ((RWORD((HostP->__ParmMapR))) & 0xFFFF));
+		rio_dprintk(RIO_DEBUG_BOOT, "ParmMapP : %x\n", (int) ParmMapP);
 
 		/*
-		** The links entry should be 0xFFFF; we set it up
-		** with a mask to say how many PHBs to use, and 
-		** which links to use.
-		*/
-		if ( (RWORD(ParmMapP->links) & 0xFFFF) != 0xFFFF ) {
-			rio_dprintk (RIO_DEBUG_BOOT, "RIO Mesg Run Fail %s\n", HostP->Name);
-			rio_dprintk (RIO_DEBUG_BOOT, "Links = 0x%x\n",RWORD(ParmMapP->links));
-			HOST_DISABLE;
-		}
-
-		WWORD(ParmMapP->links , RIO_LINK_ENABLE);
+		 ** The links entry should be 0xFFFF; we set it up
+		 ** with a mask to say how many PHBs to use, and
+		 ** which links to use.
+		 */
+		if ((RWORD(ParmMapP->links) & 0xFFFF) != 0xFFFF) {
+			rio_dprintk(RIO_DEBUG_BOOT, "RIO Mesg Run Fail %s\n", HostP->Name);
+			rio_dprintk(RIO_DEBUG_BOOT, "Links = 0x%x\n", RWORD(ParmMapP->links));
+			HostP->Flags &= ~RUN_STATE;
+			HostP->Flags |= RC_STUFFED;
+			RIOHostReset(HostP->Type, (struct DpRam *) HostP->CardP, HostP->Slot);
+		continue}
+
+		WWORD(ParmMapP->links, RIO_LINK_ENABLE);
 
 		/*
-		** now wait for the card to set all the parmmap->XXX stuff
-		** this is a wait of upto two seconds....
-		*/
-		rio_dprintk (RIO_DEBUG_BOOT, "Looking for init_done - %d ticks\n",p->RIOConf.StartupTime);
+		 ** now wait for the card to set all the parmmap->XXX stuff
+		 ** this is a wait of upto two seconds....
+		 */
+		rio_dprintk(RIO_DEBUG_BOOT, "Looking for init_done - %d ticks\n", p->RIOConf.StartupTime);
 		HostP->timeout_id = 0;
-		for ( wait_count=0; (wait_count<p->RIOConf.StartupTime) && 
-						!RWORD(ParmMapP->init_done); wait_count++ ) {
-			rio_dprintk (RIO_DEBUG_BOOT, "Waiting for init_done\n");
+		for (wait_count = 0; (wait_count < p->RIOConf.StartupTime) && !RWORD(ParmMapP->init_done); wait_count++) {
+			rio_dprintk(RIO_DEBUG_BOOT, "Waiting for init_done\n");
 			delay(HostP, HUNDRED_MS);
 		}
-		rio_dprintk (RIO_DEBUG_BOOT, "OK! init_done!\n");
+		rio_dprintk(RIO_DEBUG_BOOT, "OK! init_done!\n");
 
-		if (RWORD(ParmMapP->error) != E_NO_ERROR || 
-							!RWORD(ParmMapP->init_done) ) {
-			rio_dprintk (RIO_DEBUG_BOOT, "RIO Mesg Run Fail %s\n", HostP->Name);
-			rio_dprintk (RIO_DEBUG_BOOT, "Timedout waiting for init_done\n");
-			HOST_DISABLE;
-		}
+		if (RWORD(ParmMapP->error) != E_NO_ERROR || !RWORD(ParmMapP->init_done)) {
+			rio_dprintk(RIO_DEBUG_BOOT, "RIO Mesg Run Fail %s\n", HostP->Name);
+			rio_dprintk(RIO_DEBUG_BOOT, "Timedout waiting for init_done\n");
+			HostP->Flags &= ~RUN_STATE;
+			HostP->Flags |= RC_STUFFED;
+			RIOHostReset(HostP->Type, (struct DpRam *) HostP->CardP, HostP->Slot);
+		continue}
 
-		rio_dprintk (RIO_DEBUG_BOOT, "Got init_done\n");
+		rio_dprintk(RIO_DEBUG_BOOT, "Got init_done\n");
 
 		/*
-		** It runs! It runs!
-		*/
-		rio_dprintk (RIO_DEBUG_BOOT, "Host ID %x Running\n",HostP->UniqueNum);
+		 ** It runs! It runs!
+		 */
+		rio_dprintk(RIO_DEBUG_BOOT, "Host ID %x Running\n", HostP->UniqueNum);
 
 		/*
-		** set the time period between interrupts.
-		*/
-		WWORD(ParmMapP->timer, (short)p->RIOConf.Timer );
+		 ** set the time period between interrupts.
+		 */
+		WWORD(ParmMapP->timer, (short) p->RIOConf.Timer);
 
 		/*
-		** Translate all the 16 bit pointers in the __ParmMapR into
-		** 32 bit pointers for the driver.
-		*/
-		HostP->ParmMapP	 =	ParmMapP;
-		HostP->PhbP		 =	(PHB*)RIO_PTR(Cad,RWORD(ParmMapP->phb_ptr));
-		HostP->RupP		 =	(RUP*)RIO_PTR(Cad,RWORD(ParmMapP->rups));
-		HostP->PhbNumP	  = (ushort*)RIO_PTR(Cad,RWORD(ParmMapP->phb_num_ptr));
-		HostP->LinkStrP	 =	(LPB*)RIO_PTR(Cad,RWORD(ParmMapP->link_str_ptr));
+		 ** Translate all the 16 bit pointers in the __ParmMapR into
+		 ** 32 bit pointers for the driver.
+		 */
+		HostP->ParmMapP = ParmMapP;
+		HostP->PhbP = (PHB *) RIO_PTR(Cad, RWORD(ParmMapP->phb_ptr));
+		HostP->RupP = (RUP *) RIO_PTR(Cad, RWORD(ParmMapP->rups));
+		HostP->PhbNumP = (ushort *) RIO_PTR(Cad, RWORD(ParmMapP->phb_num_ptr));
+		HostP->LinkStrP = (LPB *) RIO_PTR(Cad, RWORD(ParmMapP->link_str_ptr));
 
 		/*
-		** point the UnixRups at the real Rups
-		*/
-		for ( RupN = 0; RupN<MAX_RUP; RupN++ ) {
-			HostP->UnixRups[RupN].RupP		= &HostP->RupP[RupN];
-			HostP->UnixRups[RupN].Id		  = RupN+1;
+		 ** point the UnixRups at the real Rups
+		 */
+		for (RupN = 0; RupN < MAX_RUP; RupN++) {
+			HostP->UnixRups[RupN].RupP = &HostP->RupP[RupN];
+			HostP->UnixRups[RupN].Id = RupN + 1;
 			HostP->UnixRups[RupN].BaseSysPort = NO_PORT;
 			spin_lock_init(&HostP->UnixRups[RupN].RupLock);
 		}
 
-		for ( RupN = 0; RupN<LINKS_PER_UNIT; RupN++ ) {
-			HostP->UnixRups[RupN+MAX_RUP].RupP	= &HostP->LinkStrP[RupN].rup;
-			HostP->UnixRups[RupN+MAX_RUP].Id  = 0;
-			HostP->UnixRups[RupN+MAX_RUP].BaseSysPort = NO_PORT;
-			spin_lock_init(&HostP->UnixRups[RupN+MAX_RUP].RupLock);
+		for (RupN = 0; RupN < LINKS_PER_UNIT; RupN++) {
+			HostP->UnixRups[RupN + MAX_RUP].RupP = &HostP->LinkStrP[RupN].rup;
+			HostP->UnixRups[RupN + MAX_RUP].Id = 0;
+			HostP->UnixRups[RupN + MAX_RUP].BaseSysPort = NO_PORT;
+			spin_lock_init(&HostP->UnixRups[RupN + MAX_RUP].RupLock);
 		}
 
 		/*
-		** point the PortP->Phbs at the real Phbs
-		*/
-		for ( PortN=p->RIOFirstPortsMapped; 
-				PortN<p->RIOLastPortsMapped+PORTS_PER_RTA; PortN++ ) {
-			if ( p->RIOPortp[PortN]->HostP == HostP ) {
+		 ** point the PortP->Phbs at the real Phbs
+		 */
+		for (PortN = p->RIOFirstPortsMapped; PortN < p->RIOLastPortsMapped + PORTS_PER_RTA; PortN++) {
+			if (p->RIOPortp[PortN]->HostP == HostP) {
 				struct Port *PortP = p->RIOPortp[PortN];
 				struct PHB *PhbP;
 				/* int oldspl; */
 
-				if ( !PortP->Mapped )
+				if (!PortP->Mapped)
 					continue;
 
 				PhbP = &HostP->PhbP[PortP->HostPort];
@@ -610,40 +592,40 @@ register struct DownLoad *rbp;
 
 				PortP->PhbP = PhbP;
 
-				PortP->TxAdd	= (WORD *)RIO_PTR(Cad,RWORD(PhbP->tx_add));
-				PortP->TxStart  = (WORD *)RIO_PTR(Cad,RWORD(PhbP->tx_start));
-				PortP->TxEnd	= (WORD *)RIO_PTR(Cad,RWORD(PhbP->tx_end));
-				PortP->RxRemove = (WORD *)RIO_PTR(Cad,RWORD(PhbP->rx_remove));
-				PortP->RxStart  = (WORD *)RIO_PTR(Cad,RWORD(PhbP->rx_start));
-				PortP->RxEnd	= (WORD *)RIO_PTR(Cad,RWORD(PhbP->rx_end));
+				PortP->TxAdd = (WORD *) RIO_PTR(Cad, RWORD(PhbP->tx_add));
+				PortP->TxStart = (WORD *) RIO_PTR(Cad, RWORD(PhbP->tx_start));
+				PortP->TxEnd = (WORD *) RIO_PTR(Cad, RWORD(PhbP->tx_end));
+				PortP->RxRemove = (WORD *) RIO_PTR(Cad, RWORD(PhbP->rx_remove));
+				PortP->RxStart = (WORD *) RIO_PTR(Cad, RWORD(PhbP->rx_start));
+				PortP->RxEnd = (WORD *) RIO_PTR(Cad, RWORD(PhbP->rx_end));
 
 				rio_spin_unlock_irqrestore(&PortP->portSem, flags);
 				/*
-				** point the UnixRup at the base SysPort
-				*/
-				if ( !(PortN % PORTS_PER_RTA) )
+				 ** point the UnixRup at the base SysPort
+				 */
+				if (!(PortN % PORTS_PER_RTA))
 					HostP->UnixRups[PortP->RupNum].BaseSysPort = PortN;
 			}
 		}
 
-		rio_dprintk (RIO_DEBUG_BOOT, "Set the card running... \n");
+		rio_dprintk(RIO_DEBUG_BOOT, "Set the card running... \n");
 		/*
-		** last thing - show the world that everything is in place
-		*/
+		 ** last thing - show the world that everything is in place
+		 */
 		HostP->Flags &= ~RUN_STATE;
 		HostP->Flags |= RC_RUNNING;
 	}
 	/*
-	** MPX always uses a poller. This is actually patched into the system
-	** configuration and called directly from each clock tick.
-	**
-	*/
+	 ** MPX always uses a poller. This is actually patched into the system
+	 ** configuration and called directly from each clock tick.
+	 **
+	 */
 	p->RIOPolling = 1;
 
 	p->RIOSystemUp++;
-	
-	rio_dprintk (RIO_DEBUG_BOOT, "Done everything %x\n", HostP->Ivec);
-	func_exit ();
+
+	rio_dprintk(RIO_DEBUG_BOOT, "Done everything %x\n", HostP->Ivec);
+	func_exit();
 	return 0;
 }
 
@@ -653,23 +635,22 @@ register struct DownLoad *rbp;
 ** Boot an RTA. If we have successfully processed this boot, then
 ** return 1. If we havent, then return 0.
 */
-int
-RIOBootRup( p, Rup, HostP, PacketP)
-struct rio_info *	p;
+int RIOBootRup(p, Rup, HostP, PacketP)
+struct rio_info *p;
 uint Rup;
 struct Host *HostP;
-struct PKT *PacketP; 
+struct PKT *PacketP;
 {
-	struct PktCmd *PktCmdP = (struct PktCmd *)PacketP->data;
+	struct PktCmd *PktCmdP = (struct PktCmd *) PacketP->data;
 	struct PktCmd_M *PktReplyP;
 	struct CmdBlk *CmdBlkP;
 	uint sequence;
 
 	/*
-	** If we haven't been told what to boot, we can't boot it.
-	*/
-	if ( p->RIONumBootPkts == 0 ) {
-		rio_dprintk (RIO_DEBUG_BOOT, "No RTA code to download yet\n");
+	 ** If we haven't been told what to boot, we can't boot it.
+	 */
+	if (p->RIONumBootPkts == 0) {
+		rio_dprintk(RIO_DEBUG_BOOT, "No RTA code to download yet\n");
 		return 0;
 	}
 
@@ -677,117 +658,111 @@ struct PKT *PacketP;
 	/* ShowPacket( DBG_BOOT, PacketP ); */
 
 	/*
-	** Special case of boot completed - if we get one of these then we
-	** don't need a command block. For all other cases we do, so handle
-	** this first and then get a command block, then handle every other
-	** case, relinquishing the command block if disaster strikes!
-	*/
-	if ( (RBYTE(PacketP->len) & PKT_CMD_BIT) && 
-			(RBYTE(PktCmdP->Command)==BOOT_COMPLETED) )
-		return RIOBootComplete(p, HostP, Rup, PktCmdP );
+	 ** Special case of boot completed - if we get one of these then we
+	 ** don't need a command block. For all other cases we do, so handle
+	 ** this first and then get a command block, then handle every other
+	 ** case, relinquishing the command block if disaster strikes!
+	 */
+	if ((RBYTE(PacketP->len) & PKT_CMD_BIT) && (RBYTE(PktCmdP->Command) == BOOT_COMPLETED))
+		return RIOBootComplete(p, HostP, Rup, PktCmdP);
 
 	/*
-	** try to unhook a command block from the command free list.
-	*/
-	if ( !(CmdBlkP = RIOGetCmdBlk()) ) {
-		rio_dprintk (RIO_DEBUG_BOOT, "No command blocks to boot RTA! come back later.\n");
+	 ** try to unhook a command block from the command free list.
+	 */
+	if (!(CmdBlkP = RIOGetCmdBlk())) {
+		rio_dprintk(RIO_DEBUG_BOOT, "No command blocks to boot RTA! come back later.\n");
 		return 0;
 	}
 
 	/*
-	** Fill in the default info on the command block
-	*/
-	CmdBlkP->Packet.dest_unit = Rup < (ushort)MAX_RUP ? Rup : 0;
+	 ** Fill in the default info on the command block
+	 */
+	CmdBlkP->Packet.dest_unit = Rup < (ushort) MAX_RUP ? Rup : 0;
 	CmdBlkP->Packet.dest_port = BOOT_RUP;
-	CmdBlkP->Packet.src_unit  = 0;
-	CmdBlkP->Packet.src_port  = BOOT_RUP;
+	CmdBlkP->Packet.src_unit = 0;
+	CmdBlkP->Packet.src_port = BOOT_RUP;
 
 	CmdBlkP->PreFuncP = CmdBlkP->PostFuncP = NULL;
-	PktReplyP = (struct PktCmd_M *)CmdBlkP->Packet.data;
+	PktReplyP = (struct PktCmd_M *) CmdBlkP->Packet.data;
 
 	/*
-	** process COMMANDS on the boot rup!
-	*/
-	if ( RBYTE(PacketP->len) & PKT_CMD_BIT ) {
+	 ** process COMMANDS on the boot rup!
+	 */
+	if (RBYTE(PacketP->len) & PKT_CMD_BIT) {
 		/*
-		** We only expect one type of command - a BOOT_REQUEST!
-		*/
-		if ( RBYTE(PktCmdP->Command) != BOOT_REQUEST ) {
-			rio_dprintk (RIO_DEBUG_BOOT, "Unexpected command %d on BOOT RUP %d of host %d\n", 
-						PktCmdP->Command,Rup,HostP-p->RIOHosts);
-			ShowPacket( DBG_BOOT, PacketP );
-			RIOFreeCmdBlk( CmdBlkP );
+		 ** We only expect one type of command - a BOOT_REQUEST!
+		 */
+		if (RBYTE(PktCmdP->Command) != BOOT_REQUEST) {
+			rio_dprintk(RIO_DEBUG_BOOT, "Unexpected command %d on BOOT RUP %d of host %d\n", PktCmdP->Command, Rup, HostP - p->RIOHosts);
+			ShowPacket(DBG_BOOT, PacketP);
+			RIOFreeCmdBlk(CmdBlkP);
 			return 1;
 		}
 
 		/*
-		** Build a Boot Sequence command block
-		**
-		** 02.03.1999 ARG - ESIL 0820 fix
-		** We no longer need to use "Boot Mode", we'll always allow
-		** boot requests - the boot will not complete if the device
-		** appears in the bindings table.
-		** So, this conditional is not required ...
-		**
-		if (p->RIOBootMode == RC_BOOT_NONE)
-			**
-			** If the system is in slave mode, and a boot request is
-			** received, set command to BOOT_ABORT so that the boot
-			** will not complete.
-			**
-			PktReplyP->Command			 = BOOT_ABORT;
-		else
-		**
-		** We'll just (always) set the command field in packet reply
-		** to allow an attempted boot sequence :
-		*/
+		 ** Build a Boot Sequence command block
+		 **
+		 ** 02.03.1999 ARG - ESIL 0820 fix
+		 ** We no longer need to use "Boot Mode", we'll always allow
+		 ** boot requests - the boot will not complete if the device
+		 ** appears in the bindings table.
+		 ** So, this conditional is not required ...
+		 **
+		 if (p->RIOBootMode == RC_BOOT_NONE)
+		 **
+		 ** If the system is in slave mode, and a boot request is
+		 ** received, set command to BOOT_ABORT so that the boot
+		 ** will not complete.
+		 **
+		 PktReplyP->Command                      = BOOT_ABORT;
+		 else
+		 **
+		 ** We'll just (always) set the command field in packet reply
+		 ** to allow an attempted boot sequence :
+		 */
 		PktReplyP->Command = BOOT_SEQUENCE;
 
 		PktReplyP->BootSequence.NumPackets = p->RIONumBootPkts;
-		PktReplyP->BootSequence.LoadBase   = p->RIOConf.RtaLoadBase;
-		PktReplyP->BootSequence.CodeSize   = p->RIOBootCount;
+		PktReplyP->BootSequence.LoadBase = p->RIOConf.RtaLoadBase;
+		PktReplyP->BootSequence.CodeSize = p->RIOBootCount;
 
-		CmdBlkP->Packet.len				= BOOT_SEQUENCE_LEN | PKT_CMD_BIT;
+		CmdBlkP->Packet.len = BOOT_SEQUENCE_LEN | PKT_CMD_BIT;
 
-		bcopy("BOOT",(void *)&CmdBlkP->Packet.data[BOOT_SEQUENCE_LEN],4);
+		bcopy("BOOT", (void *) &CmdBlkP->Packet.data[BOOT_SEQUENCE_LEN], 4);
 
-		rio_dprintk (RIO_DEBUG_BOOT, "Boot RTA on Host %d Rup %d - %d (0x%x) packets to 0x%x\n",
-			HostP-p->RIOHosts, Rup, p->RIONumBootPkts, p->RIONumBootPkts, 
-								p->RIOConf.RtaLoadBase);
+		rio_dprintk(RIO_DEBUG_BOOT, "Boot RTA on Host %d Rup %d - %d (0x%x) packets to 0x%x\n", HostP - p->RIOHosts, Rup, p->RIONumBootPkts, p->RIONumBootPkts, p->RIOConf.RtaLoadBase);
 
 		/*
-		** If this host is in slave mode, send the RTA an invalid boot
-		** sequence command block to force it to kill the boot. We wait
-		** for half a second before sending this packet to prevent the RTA
-		** attempting to boot too often. The master host should then grab
-		** the RTA and make it its own.
-		*/
+		 ** If this host is in slave mode, send the RTA an invalid boot
+		 ** sequence command block to force it to kill the boot. We wait
+		 ** for half a second before sending this packet to prevent the RTA
+		 ** attempting to boot too often. The master host should then grab
+		 ** the RTA and make it its own.
+		 */
 		p->RIOBooting++;
-		RIOQueueCmdBlk( HostP, Rup, CmdBlkP );
+		RIOQueueCmdBlk(HostP, Rup, CmdBlkP);
 		return 1;
 	}
 
 	/*
-	** It is a request for boot data.
-	*/
+	 ** It is a request for boot data.
+	 */
 	sequence = RWORD(PktCmdP->Sequence);
 
-	rio_dprintk (RIO_DEBUG_BOOT, "Boot block %d on Host %d Rup%d\n",sequence,HostP-p->RIOHosts,Rup);
+	rio_dprintk(RIO_DEBUG_BOOT, "Boot block %d on Host %d Rup%d\n", sequence, HostP - p->RIOHosts, Rup);
 
-	if ( sequence >= p->RIONumBootPkts ) {
-		rio_dprintk (RIO_DEBUG_BOOT, "Got a request for packet %d, max is %d\n", sequence, 
-					p->RIONumBootPkts);
-		ShowPacket( DBG_BOOT, PacketP );
+	if (sequence >= p->RIONumBootPkts) {
+		rio_dprintk(RIO_DEBUG_BOOT, "Got a request for packet %d, max is %d\n", sequence, p->RIONumBootPkts);
+		ShowPacket(DBG_BOOT, PacketP);
 	}
 
 	PktReplyP->Sequence = sequence;
 
-	bcopy( p->RIOBootPackets[ p->RIONumBootPkts - sequence - 1 ], 
-				PktReplyP->BootData, RTA_BOOT_DATA_SIZE );
+	bcopy(p->RIOBootPackets[p->RIONumBootPkts - sequence - 1], PktReplyP->BootData, RTA_BOOT_DATA_SIZE);
 
 	CmdBlkP->Packet.len = PKT_MAX_DATA_LEN;
-	ShowPacket( DBG_BOOT, &CmdBlkP->Packet );
-	RIOQueueCmdBlk( HostP, Rup, CmdBlkP );
+	ShowPacket(DBG_BOOT, &CmdBlkP->Packet);
+	RIOQueueCmdBlk(HostP, Rup, CmdBlkP);
 	return 1;
 }
 
@@ -797,422 +772,348 @@ struct PKT *PacketP;
 ** If booted by an RTA, HostP->Mapping[Rup].RtaUniqueNum is the booting RTA.
 ** RtaUniq is the booted RTA.
 */
-static int RIOBootComplete( struct rio_info *p, struct Host *HostP, uint Rup, struct PktCmd *PktCmdP )
+static int RIOBootComplete(struct rio_info *p, struct Host *HostP, uint Rup, struct PktCmd *PktCmdP)
 {
-	struct Map	*MapP = NULL;
-	struct Map	*MapP2 = NULL;
-	int	Flag;
-	int	found;
-	int	host, rta;
-	int	EmptySlot = -1;
-	int	entry, entry2;
-	char	*MyType, *MyName;
-	uint	MyLink;
-	ushort	RtaType;
-	uint	RtaUniq = (RBYTE(PktCmdP->UniqNum[0])) +
-			  (RBYTE(PktCmdP->UniqNum[1]) << 8) +
-			  (RBYTE(PktCmdP->UniqNum[2]) << 16) +
-			  (RBYTE(PktCmdP->UniqNum[3]) << 24);
+	struct Map *MapP = NULL;
+	struct Map *MapP2 = NULL;
+	int Flag;
+	int found;
+	int host, rta;
+	int EmptySlot = -1;
+	int entry, entry2;
+	char *MyType, *MyName;
+	uint MyLink;
+	ushort RtaType;
+	uint RtaUniq = (RBYTE(PktCmdP->UniqNum[0])) + (RBYTE(PktCmdP->UniqNum[1]) << 8) + (RBYTE(PktCmdP->UniqNum[2]) << 16) + (RBYTE(PktCmdP->UniqNum[3]) << 24);
 
 	/* Was RIOBooting-- . That's bad. If an RTA sends two of them, the
 	   driver will never think that the RTA has booted... -- REW */
 	p->RIOBooting = 0;
 
-	rio_dprintk (RIO_DEBUG_BOOT, "RTA Boot completed - BootInProgress now %d\n", p->RIOBooting);
+	rio_dprintk(RIO_DEBUG_BOOT, "RTA Boot completed - BootInProgress now %d\n", p->RIOBooting);
 
 	/*
-	** Determine type of unit (16/8 port RTA).
-	*/
+	 ** Determine type of unit (16/8 port RTA).
+	 */
 	RtaType = GetUnitType(RtaUniq);
-        if ( Rup >= (ushort)MAX_RUP ) {
-	    rio_dprintk (RIO_DEBUG_BOOT, "RIO: Host %s has booted an RTA(%d) on link %c\n",
-	     HostP->Name, 8 * RtaType, RBYTE(PktCmdP->LinkNum)+'A');
+	if (Rup >= (ushort) MAX_RUP) {
+		rio_dprintk(RIO_DEBUG_BOOT, "RIO: Host %s has booted an RTA(%d) on link %c\n", HostP->Name, 8 * RtaType, RBYTE(PktCmdP->LinkNum) + 'A');
 	} else {
-	    rio_dprintk (RIO_DEBUG_BOOT, "RIO: RTA %s has booted an RTA(%d) on link %c\n",
-	     HostP->Mapping[Rup].Name, 8 * RtaType,
-	     RBYTE(PktCmdP->LinkNum)+'A');
+		rio_dprintk(RIO_DEBUG_BOOT, "RIO: RTA %s has booted an RTA(%d) on link %c\n", HostP->Mapping[Rup].Name, 8 * RtaType, RBYTE(PktCmdP->LinkNum) + 'A');
 	}
 
-	rio_dprintk (RIO_DEBUG_BOOT, "UniqNum is 0x%x\n",RtaUniq);
+	rio_dprintk(RIO_DEBUG_BOOT, "UniqNum is 0x%x\n", RtaUniq);
 
-        if ( ( RtaUniq == 0x00000000 ) || ( RtaUniq == 0xffffffff ) )
-	{
-	    rio_dprintk (RIO_DEBUG_BOOT, "Illegal RTA Uniq Number\n");
-	    return TRUE;
+	if ((RtaUniq == 0x00000000) || (RtaUniq == 0xffffffff)) {
+		rio_dprintk(RIO_DEBUG_BOOT, "Illegal RTA Uniq Number\n");
+		return TRUE;
 	}
 
 	/*
-	** If this RTA has just booted an RTA which doesn't belong to this
-	** system, or the system is in slave mode, do not attempt to create
-	** a new table entry for it.
-	*/
-	if (!RIOBootOk(p, HostP, RtaUniq))
-	{
-	    MyLink = RBYTE(PktCmdP->LinkNum);
-	    if (Rup < (ushort) MAX_RUP)
-	    {
-		/*
-		** RtaUniq was clone booted (by this RTA). Instruct this RTA
-		** to hold off further attempts to boot on this link for 30
-		** seconds.
-		*/
-		if (RIOSuspendBootRta(HostP, HostP->Mapping[Rup].ID, MyLink))
-		{
-		    rio_dprintk (RIO_DEBUG_BOOT, "RTA failed to suspend booting on link %c\n",
-		     'A' + MyLink);
+	 ** If this RTA has just booted an RTA which doesn't belong to this
+	 ** system, or the system is in slave mode, do not attempt to create
+	 ** a new table entry for it.
+	 */
+	if (!RIOBootOk(p, HostP, RtaUniq)) {
+		MyLink = RBYTE(PktCmdP->LinkNum);
+		if (Rup < (ushort) MAX_RUP) {
+			/*
+			 ** RtaUniq was clone booted (by this RTA). Instruct this RTA
+			 ** to hold off further attempts to boot on this link for 30
+			 ** seconds.
+			 */
+			if (RIOSuspendBootRta(HostP, HostP->Mapping[Rup].ID, MyLink)) {
+				rio_dprintk(RIO_DEBUG_BOOT, "RTA failed to suspend booting on link %c\n", 'A' + MyLink);
+			}
+		} else {
+			/*
+			 ** RtaUniq was booted by this host. Set the booting link
+			 ** to hold off for 30 seconds to give another unit a
+			 ** chance to boot it.
+			 */
+			WWORD(HostP->LinkStrP[MyLink].WaitNoBoot, 30);
 		}
-	    }
-	    else
-	    {
-		/*
-		** RtaUniq was booted by this host. Set the booting link
-		** to hold off for 30 seconds to give another unit a
-		** chance to boot it.
-		*/
-		WWORD(HostP->LinkStrP[MyLink].WaitNoBoot, 30);
-	    }
-	    rio_dprintk (RIO_DEBUG_BOOT, "RTA %x not owned - suspend booting down link %c on unit %x\n",
-	      RtaUniq, 'A' + MyLink, HostP->Mapping[Rup].RtaUniqueNum);
-	    return TRUE;
+		rio_dprintk(RIO_DEBUG_BOOT, "RTA %x not owned - suspend booting down link %c on unit %x\n", RtaUniq, 'A' + MyLink, HostP->Mapping[Rup].RtaUniqueNum);
+		return TRUE;
 	}
 
 	/*
-	** Check for a SLOT_IN_USE entry for this RTA attached to the
-	** current host card in the driver table.
-	**
-	** If it exists, make a note that we have booted it. Other parts of
-	** the driver are interested in this information at a later date,
-	** in particular when the booting RTA asks for an ID for this unit,
-	** we must have set the BOOTED flag, and the NEWBOOT flag is used
-	** to force an open on any ports that where previously open on this
-	** unit.
-	*/
-        for ( entry=0; entry<MAX_RUP; entry++ )
-	{
-	    uint sysport;
-
-	    if ((HostP->Mapping[entry].Flags & SLOT_IN_USE) && 
-	       (HostP->Mapping[entry].RtaUniqueNum==RtaUniq))
-	    {
-	        HostP->Mapping[entry].Flags |= RTA_BOOTED|RTA_NEWBOOT;
+	 ** Check for a SLOT_IN_USE entry for this RTA attached to the
+	 ** current host card in the driver table.
+	 **
+	 ** If it exists, make a note that we have booted it. Other parts of
+	 ** the driver are interested in this information at a later date,
+	 ** in particular when the booting RTA asks for an ID for this unit,
+	 ** we must have set the BOOTED flag, and the NEWBOOT flag is used
+	 ** to force an open on any ports that where previously open on this
+	 ** unit.
+	 */
+	for (entry = 0; entry < MAX_RUP; entry++) {
+		uint sysport;
+
+		if ((HostP->Mapping[entry].Flags & SLOT_IN_USE) && (HostP->Mapping[entry].RtaUniqueNum == RtaUniq)) {
+			HostP->Mapping[entry].Flags |= RTA_BOOTED | RTA_NEWBOOT;
 #ifdef NEED_TO_FIX
-		RIO_SV_BROADCAST(HostP->svFlags[entry]);
+			RIO_SV_BROADCAST(HostP->svFlags[entry]);
 #endif
-		if ( (sysport=HostP->Mapping[entry].SysPort) != NO_PORT )
-		{
-		   if ( sysport < p->RIOFirstPortsBooted )
-			p->RIOFirstPortsBooted = sysport;
-		   if ( sysport > p->RIOLastPortsBooted )
-			p->RIOLastPortsBooted = sysport;
-		   /*
-		   ** For a 16 port RTA, check the second bank of 8 ports
-		   */
-		   if (RtaType == TYPE_RTA16)
-		   {
-			entry2 = HostP->Mapping[entry].ID2 - 1;
-			HostP->Mapping[entry2].Flags |= RTA_BOOTED|RTA_NEWBOOT;
+			if ((sysport = HostP->Mapping[entry].SysPort) != NO_PORT) {
+				if (sysport < p->RIOFirstPortsBooted)
+					p->RIOFirstPortsBooted = sysport;
+				if (sysport > p->RIOLastPortsBooted)
+					p->RIOLastPortsBooted = sysport;
+				/*
+				 ** For a 16 port RTA, check the second bank of 8 ports
+				 */
+				if (RtaType == TYPE_RTA16) {
+					entry2 = HostP->Mapping[entry].ID2 - 1;
+					HostP->Mapping[entry2].Flags |= RTA_BOOTED | RTA_NEWBOOT;
 #ifdef NEED_TO_FIX
-			RIO_SV_BROADCAST(HostP->svFlags[entry2]);
+					RIO_SV_BROADCAST(HostP->svFlags[entry2]);
 #endif
-			sysport = HostP->Mapping[entry2].SysPort;
-			if ( sysport < p->RIOFirstPortsBooted )
-			    p->RIOFirstPortsBooted = sysport;
-			if ( sysport > p->RIOLastPortsBooted )
-			    p->RIOLastPortsBooted = sysport;
-		   }
-		}
-		if (RtaType == TYPE_RTA16) {
-		   rio_dprintk (RIO_DEBUG_BOOT, "RTA will be given IDs %d+%d\n",
-		    entry+1, entry2+1);
-		} else {
-		   rio_dprintk (RIO_DEBUG_BOOT, "RTA will be given ID %d\n",entry+1);
+					sysport = HostP->Mapping[entry2].SysPort;
+					if (sysport < p->RIOFirstPortsBooted)
+						p->RIOFirstPortsBooted = sysport;
+					if (sysport > p->RIOLastPortsBooted)
+						p->RIOLastPortsBooted = sysport;
+				}
+			}
+			if (RtaType == TYPE_RTA16) {
+				rio_dprintk(RIO_DEBUG_BOOT, "RTA will be given IDs %d+%d\n", entry + 1, entry2 + 1);
+			} else {
+				rio_dprintk(RIO_DEBUG_BOOT, "RTA will be given ID %d\n", entry + 1);
+			}
+			return TRUE;
 		}
-		return TRUE;
-	    }
 	}
 
-	rio_dprintk (RIO_DEBUG_BOOT, "RTA not configured for this host\n");
+	rio_dprintk(RIO_DEBUG_BOOT, "RTA not configured for this host\n");
 
-	if ( Rup >= (ushort)MAX_RUP )
-	{
-	    /*
-	    ** It was a host that did the booting
-	    */
-	    MyType = "Host";
-	    MyName = HostP->Name;
-	}
-	else
-	{
-	    /*
-	    ** It was an RTA that did the booting
-	    */
-	    MyType = "RTA";
-	    MyName = HostP->Mapping[Rup].Name;
+	if (Rup >= (ushort) MAX_RUP) {
+		/*
+		 ** It was a host that did the booting
+		 */
+		MyType = "Host";
+		MyName = HostP->Name;
+	} else {
+		/*
+		 ** It was an RTA that did the booting
+		 */
+		MyType = "RTA";
+		MyName = HostP->Mapping[Rup].Name;
 	}
 	MyLink = RBYTE(PktCmdP->LinkNum);
 
 	/*
-	** There is no SLOT_IN_USE entry for this RTA attached to the current
-	** host card in the driver table.
-	**
-	** Check for a SLOT_TENTATIVE entry for this RTA attached to the
-	** current host card in the driver table.
-	**
-	** If we find one, then we re-use that slot.
-	*/
-	for ( entry=0; entry<MAX_RUP; entry++ )
-	{
-	    if ( (HostP->Mapping[entry].Flags & SLOT_TENTATIVE) &&
-		 (HostP->Mapping[entry].RtaUniqueNum == RtaUniq) )
-	    {
-		if (RtaType == TYPE_RTA16)
-		{
-		    entry2 = HostP->Mapping[entry].ID2 - 1;
-		    if ( (HostP->Mapping[entry2].Flags & SLOT_TENTATIVE) &&
-			 (HostP->Mapping[entry2].RtaUniqueNum == RtaUniq) )
-			rio_dprintk (RIO_DEBUG_BOOT, "Found previous tentative slots (%d+%d)\n",
-			 entry, entry2);
-		    else
-			continue;
+	 ** There is no SLOT_IN_USE entry for this RTA attached to the current
+	 ** host card in the driver table.
+	 **
+	 ** Check for a SLOT_TENTATIVE entry for this RTA attached to the
+	 ** current host card in the driver table.
+	 **
+	 ** If we find one, then we re-use that slot.
+	 */
+	for (entry = 0; entry < MAX_RUP; entry++) {
+		if ((HostP->Mapping[entry].Flags & SLOT_TENTATIVE) && (HostP->Mapping[entry].RtaUniqueNum == RtaUniq)) {
+			if (RtaType == TYPE_RTA16) {
+				entry2 = HostP->Mapping[entry].ID2 - 1;
+				if ((HostP->Mapping[entry2].Flags & SLOT_TENTATIVE) && (HostP->Mapping[entry2].RtaUniqueNum == RtaUniq))
+					rio_dprintk(RIO_DEBUG_BOOT, "Found previous tentative slots (%d+%d)\n", entry, entry2);
+				else
+					continue;
+			} else
+				rio_dprintk(RIO_DEBUG_BOOT, "Found previous tentative slot (%d)\n", entry);
+			if (!p->RIONoMessage)
+				cprintf("RTA connected to %s '%s' (%c) not configured.\n", MyType, MyName, MyLink + 'A');
+			return TRUE;
 		}
-		else
-			rio_dprintk (RIO_DEBUG_BOOT, "Found previous tentative slot (%d)\n",entry);
-		if (! p->RIONoMessage)
-		    cprintf("RTA connected to %s '%s' (%c) not configured.\n",MyType,MyName,MyLink+'A');
-		return TRUE;
-	    }
 	}
 
 	/*
-	** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA
-	** attached to the current host card in the driver table.
-	**
-	** Check if there is a SLOT_IN_USE or SLOT_TENTATIVE entry on another
-	** host for this RTA in the driver table.
-	**
-	** For a SLOT_IN_USE entry on another host, we need to delete the RTA
-	** entry from the other host and add it to this host (using some of
-	** the functions from table.c which do this).
-	** For a SLOT_TENTATIVE entry on another host, we must cope with the
-	** following scenario:
-	**
-	** + Plug 8 port RTA into host A. (This creates SLOT_TENTATIVE entry
-	**   in table)
-	** + Unplug RTA and plug into host B. (We now have 2 SLOT_TENTATIVE
-	**   entries)
-	** + Configure RTA on host B. (This slot now becomes SLOT_IN_USE)
-	** + Unplug RTA and plug back into host A.
-	** + Configure RTA on host A. We now have the same RTA configured
-	**   with different ports on two different hosts.
-	*/
-	rio_dprintk (RIO_DEBUG_BOOT, "Have we seen RTA %x before?\n", RtaUniq );
+	 ** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA
+	 ** attached to the current host card in the driver table.
+	 **
+	 ** Check if there is a SLOT_IN_USE or SLOT_TENTATIVE entry on another
+	 ** host for this RTA in the driver table.
+	 **
+	 ** For a SLOT_IN_USE entry on another host, we need to delete the RTA
+	 ** entry from the other host and add it to this host (using some of
+	 ** the functions from table.c which do this).
+	 ** For a SLOT_TENTATIVE entry on another host, we must cope with the
+	 ** following scenario:
+	 **
+	 ** + Plug 8 port RTA into host A. (This creates SLOT_TENTATIVE entry
+	 **   in table)
+	 ** + Unplug RTA and plug into host B. (We now have 2 SLOT_TENTATIVE
+	 **   entries)
+	 ** + Configure RTA on host B. (This slot now becomes SLOT_IN_USE)
+	 ** + Unplug RTA and plug back into host A.
+	 ** + Configure RTA on host A. We now have the same RTA configured
+	 **   with different ports on two different hosts.
+	 */
+	rio_dprintk(RIO_DEBUG_BOOT, "Have we seen RTA %x before?\n", RtaUniq);
 	found = 0;
-	Flag = 0; /* Convince the compiler this variable is initialized */
-	for ( host = 0; !found && (host < p->RIONumHosts); host++ )
-	{
-	    for ( rta=0; rta<MAX_RUP; rta++ )
-	    {
-		if ((p->RIOHosts[host].Mapping[rta].Flags &
-		 (SLOT_IN_USE | SLOT_TENTATIVE)) &&
-		 (p->RIOHosts[host].Mapping[rta].RtaUniqueNum==RtaUniq))
-		{
-		    Flag = p->RIOHosts[host].Mapping[rta].Flags;
-		    MapP = &p->RIOHosts[host].Mapping[rta];
-		    if (RtaType == TYPE_RTA16)
-		    {
-			MapP2 = &p->RIOHosts[host].Mapping[MapP->ID2 - 1];
-			rio_dprintk (RIO_DEBUG_BOOT, "This RTA is units %d+%d from host %s\n",
-			 rta+1, MapP->ID2, p->RIOHosts[host].Name);
-		    }
-		    else
-			rio_dprintk (RIO_DEBUG_BOOT, "This RTA is unit %d from host %s\n",
-			 rta+1, p->RIOHosts[host].Name);
-		    found = 1;
-		    break;
+	Flag = 0;		/* Convince the compiler this variable is initialized */
+	for (host = 0; !found && (host < p->RIONumHosts); host++) {
+		for (rta = 0; rta < MAX_RUP; rta++) {
+			if ((p->RIOHosts[host].Mapping[rta].Flags & (SLOT_IN_USE | SLOT_TENTATIVE)) && (p->RIOHosts[host].Mapping[rta].RtaUniqueNum == RtaUniq)) {
+				Flag = p->RIOHosts[host].Mapping[rta].Flags;
+				MapP = &p->RIOHosts[host].Mapping[rta];
+				if (RtaType == TYPE_RTA16) {
+					MapP2 = &p->RIOHosts[host].Mapping[MapP->ID2 - 1];
+					rio_dprintk(RIO_DEBUG_BOOT, "This RTA is units %d+%d from host %s\n", rta + 1, MapP->ID2, p->RIOHosts[host].Name);
+				} else
+					rio_dprintk(RIO_DEBUG_BOOT, "This RTA is unit %d from host %s\n", rta + 1, p->RIOHosts[host].Name);
+				found = 1;
+				break;
+			}
 		}
-	    }
 	}
 
 	/*
-	** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA
-	** attached to the current host card in the driver table.
-	**
-	** If we have not found a SLOT_IN_USE or SLOT_TENTATIVE entry on
-	** another host for this RTA in the driver table...
-	**
-	** Check for a SLOT_IN_USE entry for this RTA in the config table.
-	*/
-	if ( !MapP )
-	{
-	    rio_dprintk (RIO_DEBUG_BOOT, "Look for RTA %x in RIOSavedTable\n",RtaUniq);
-	    for ( rta=0; rta < TOTAL_MAP_ENTRIES; rta++ )
-	    {
-		rio_dprintk (RIO_DEBUG_BOOT, "Check table entry %d (%x)",
-		      rta,
-		      p->RIOSavedTable[rta].RtaUniqueNum);
-
-		if ( (p->RIOSavedTable[rta].Flags & SLOT_IN_USE) &&
-		 (p->RIOSavedTable[rta].RtaUniqueNum == RtaUniq) )
-		{
-		    MapP = &p->RIOSavedTable[rta];
-		    Flag = p->RIOSavedTable[rta].Flags;
-		    if (RtaType == TYPE_RTA16)
-		    {
-                        for (entry2 = rta + 1; entry2 < TOTAL_MAP_ENTRIES;
-                         entry2++)
-                        {
-                            if (p->RIOSavedTable[entry2].RtaUniqueNum == RtaUniq)
-                                break;
-                        }
-                        MapP2 = &p->RIOSavedTable[entry2];
-                        rio_dprintk (RIO_DEBUG_BOOT, "This RTA is from table entries %d+%d\n",
-                              rta, entry2);
-		    }
-		    else
-			rio_dprintk (RIO_DEBUG_BOOT, "This RTA is from table entry %d\n", rta);
-		    break;
+	 ** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA
+	 ** attached to the current host card in the driver table.
+	 **
+	 ** If we have not found a SLOT_IN_USE or SLOT_TENTATIVE entry on
+	 ** another host for this RTA in the driver table...
+	 **
+	 ** Check for a SLOT_IN_USE entry for this RTA in the config table.
+	 */
+	if (!MapP) {
+		rio_dprintk(RIO_DEBUG_BOOT, "Look for RTA %x in RIOSavedTable\n", RtaUniq);
+		for (rta = 0; rta < TOTAL_MAP_ENTRIES; rta++) {
+			rio_dprintk(RIO_DEBUG_BOOT, "Check table entry %d (%x)", rta, p->RIOSavedTable[rta].RtaUniqueNum);
+
+			if ((p->RIOSavedTable[rta].Flags & SLOT_IN_USE) && (p->RIOSavedTable[rta].RtaUniqueNum == RtaUniq)) {
+				MapP = &p->RIOSavedTable[rta];
+				Flag = p->RIOSavedTable[rta].Flags;
+				if (RtaType == TYPE_RTA16) {
+					for (entry2 = rta + 1; entry2 < TOTAL_MAP_ENTRIES; entry2++) {
+						if (p->RIOSavedTable[entry2].RtaUniqueNum == RtaUniq)
+							break;
+					}
+					MapP2 = &p->RIOSavedTable[entry2];
+					rio_dprintk(RIO_DEBUG_BOOT, "This RTA is from table entries %d+%d\n", rta, entry2);
+				} else
+					rio_dprintk(RIO_DEBUG_BOOT, "This RTA is from table entry %d\n", rta);
+				break;
+			}
 		}
-	    }
 	}
 
 	/*
-	** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA
-	** attached to the current host card in the driver table.
-	**
-	** We may have found a SLOT_IN_USE entry on another host for this
-	** RTA in the config table, or a SLOT_IN_USE or SLOT_TENTATIVE entry
-	** on another host for this RTA in the driver table.
-	**
-	** Check the driver table for room to fit this newly discovered RTA.
-	** RIOFindFreeID() first looks for free slots and if it does not
-	** find any free slots it will then attempt to oust any
-	** tentative entry in the table.
-	*/
+	 ** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA
+	 ** attached to the current host card in the driver table.
+	 **
+	 ** We may have found a SLOT_IN_USE entry on another host for this
+	 ** RTA in the config table, or a SLOT_IN_USE or SLOT_TENTATIVE entry
+	 ** on another host for this RTA in the driver table.
+	 **
+	 ** Check the driver table for room to fit this newly discovered RTA.
+	 ** RIOFindFreeID() first looks for free slots and if it does not
+	 ** find any free slots it will then attempt to oust any
+	 ** tentative entry in the table.
+	 */
 	EmptySlot = 1;
-	if (RtaType == TYPE_RTA16)
-	{
-	    if (RIOFindFreeID(p, HostP, &entry, &entry2) == 0)
-	    {
-		RIODefaultName(p, HostP, entry);
-		FillSlot(entry, entry2, RtaUniq, HostP);
-		EmptySlot = 0;
-	    }
-	}
-	else
-	{
-	    if (RIOFindFreeID(p, HostP, &entry, NULL) == 0)
-	    {
-		RIODefaultName(p, HostP, entry);
-		FillSlot(entry, 0, RtaUniq, HostP);
-		EmptySlot = 0;
-	    }
+	if (RtaType == TYPE_RTA16) {
+		if (RIOFindFreeID(p, HostP, &entry, &entry2) == 0) {
+			RIODefaultName(p, HostP, entry);
+			FillSlot(entry, entry2, RtaUniq, HostP);
+			EmptySlot = 0;
+		}
+	} else {
+		if (RIOFindFreeID(p, HostP, &entry, NULL) == 0) {
+			RIODefaultName(p, HostP, entry);
+			FillSlot(entry, 0, RtaUniq, HostP);
+			EmptySlot = 0;
+		}
 	}
 
 	/*
-	** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA
-	** attached to the current host card in the driver table.
-	**
-	** If we found a SLOT_IN_USE entry on another host for this
-	** RTA in the config or driver table, and there are enough free
-	** slots in the driver table, then we need to move it over and
-	** delete it from the other host.
-	** If we found a SLOT_TENTATIVE entry on another host for this
-	** RTA in the driver table, just delete the other host entry.
-	*/
-	if (EmptySlot == 0)
-	{
-	    if ( MapP )
-	    {
-		if (Flag & SLOT_IN_USE)
-		{
-		    rio_dprintk (RIO_DEBUG_BOOT, 
-    "This RTA configured on another host - move entry to current host (1)\n");
-		    HostP->Mapping[entry].SysPort = MapP->SysPort;
-		    CCOPY( MapP->Name, HostP->Mapping[entry].Name, MAX_NAME_LEN );
-		    HostP->Mapping[entry].Flags =
-		     SLOT_IN_USE | RTA_BOOTED | RTA_NEWBOOT;
+	 ** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA
+	 ** attached to the current host card in the driver table.
+	 **
+	 ** If we found a SLOT_IN_USE entry on another host for this
+	 ** RTA in the config or driver table, and there are enough free
+	 ** slots in the driver table, then we need to move it over and
+	 ** delete it from the other host.
+	 ** If we found a SLOT_TENTATIVE entry on another host for this
+	 ** RTA in the driver table, just delete the other host entry.
+	 */
+	if (EmptySlot == 0) {
+		if (MapP) {
+			if (Flag & SLOT_IN_USE) {
+				rio_dprintk(RIO_DEBUG_BOOT, "This RTA configured on another host - move entry to current host (1)\n");
+				HostP->Mapping[entry].SysPort = MapP->SysPort;
+				CCOPY(MapP->Name, HostP->Mapping[entry].Name, MAX_NAME_LEN);
+				HostP->Mapping[entry].Flags = SLOT_IN_USE | RTA_BOOTED | RTA_NEWBOOT;
 #ifdef NEED_TO_FIX
-		    RIO_SV_BROADCAST(HostP->svFlags[entry]);
+				RIO_SV_BROADCAST(HostP->svFlags[entry]);
 #endif
-		    RIOReMapPorts( p, HostP, &HostP->Mapping[entry] );
-		    if ( HostP->Mapping[entry].SysPort < p->RIOFirstPortsBooted )
-			p->RIOFirstPortsBooted = HostP->Mapping[entry].SysPort;
-		    if ( HostP->Mapping[entry].SysPort > p->RIOLastPortsBooted )
-			p->RIOLastPortsBooted = HostP->Mapping[entry].SysPort;
-		    rio_dprintk (RIO_DEBUG_BOOT, "SysPort %d, Name %s\n",(int)MapP->SysPort,MapP->Name);
-		}
-		else
-		{
-		    rio_dprintk (RIO_DEBUG_BOOT, 
-   "This RTA has a tentative entry on another host - delete that entry (1)\n");
-		    HostP->Mapping[entry].Flags =
-		     SLOT_TENTATIVE | RTA_BOOTED | RTA_NEWBOOT;
+				RIOReMapPorts(p, HostP, &HostP->Mapping[entry]);
+				if (HostP->Mapping[entry].SysPort < p->RIOFirstPortsBooted)
+					p->RIOFirstPortsBooted = HostP->Mapping[entry].SysPort;
+				if (HostP->Mapping[entry].SysPort > p->RIOLastPortsBooted)
+					p->RIOLastPortsBooted = HostP->Mapping[entry].SysPort;
+				rio_dprintk(RIO_DEBUG_BOOT, "SysPort %d, Name %s\n", (int) MapP->SysPort, MapP->Name);
+			} else {
+				rio_dprintk(RIO_DEBUG_BOOT, "This RTA has a tentative entry on another host - delete that entry (1)\n");
+				HostP->Mapping[entry].Flags = SLOT_TENTATIVE | RTA_BOOTED | RTA_NEWBOOT;
 #ifdef NEED_TO_FIX
-		    RIO_SV_BROADCAST(HostP->svFlags[entry]);
+				RIO_SV_BROADCAST(HostP->svFlags[entry]);
 #endif
-		}
-		if (RtaType == TYPE_RTA16)
-		{
-		    if (Flag & SLOT_IN_USE)
-		    {
-			HostP->Mapping[entry2].Flags = SLOT_IN_USE |
-			 RTA_BOOTED | RTA_NEWBOOT | RTA16_SECOND_SLOT;
+			}
+			if (RtaType == TYPE_RTA16) {
+				if (Flag & SLOT_IN_USE) {
+					HostP->Mapping[entry2].Flags = SLOT_IN_USE | RTA_BOOTED | RTA_NEWBOOT | RTA16_SECOND_SLOT;
 #ifdef NEED_TO_FIX
-			RIO_SV_BROADCAST(HostP->svFlags[entry2]);
+					RIO_SV_BROADCAST(HostP->svFlags[entry2]);
 #endif
-			HostP->Mapping[entry2].SysPort = MapP2->SysPort;
-			/*
-			** Map second block of ttys for 16 port RTA
-			*/
-			RIOReMapPorts( p, HostP, &HostP->Mapping[entry2] );
-		       if (HostP->Mapping[entry2].SysPort < p->RIOFirstPortsBooted)
-			 p->RIOFirstPortsBooted = HostP->Mapping[entry2].SysPort;
-		       if (HostP->Mapping[entry2].SysPort > p->RIOLastPortsBooted)
-			 p->RIOLastPortsBooted = HostP->Mapping[entry2].SysPort;
-			rio_dprintk (RIO_DEBUG_BOOT, "SysPort %d, Name %s\n",
-			       (int)HostP->Mapping[entry2].SysPort,
-			       HostP->Mapping[entry].Name);
-		    }
-		    else
-			HostP->Mapping[entry2].Flags = SLOT_TENTATIVE |
-			 RTA_BOOTED | RTA_NEWBOOT | RTA16_SECOND_SLOT;
+					HostP->Mapping[entry2].SysPort = MapP2->SysPort;
+					/*
+					 ** Map second block of ttys for 16 port RTA
+					 */
+					RIOReMapPorts(p, HostP, &HostP->Mapping[entry2]);
+					if (HostP->Mapping[entry2].SysPort < p->RIOFirstPortsBooted)
+						p->RIOFirstPortsBooted = HostP->Mapping[entry2].SysPort;
+					if (HostP->Mapping[entry2].SysPort > p->RIOLastPortsBooted)
+						p->RIOLastPortsBooted = HostP->Mapping[entry2].SysPort;
+					rio_dprintk(RIO_DEBUG_BOOT, "SysPort %d, Name %s\n", (int) HostP->Mapping[entry2].SysPort, HostP->Mapping[entry].Name);
+				} else
+					HostP->Mapping[entry2].Flags = SLOT_TENTATIVE | RTA_BOOTED | RTA_NEWBOOT | RTA16_SECOND_SLOT;
 #ifdef NEED_TO_FIX
-			RIO_SV_BROADCAST(HostP->svFlags[entry2]);
+				RIO_SV_BROADCAST(HostP->svFlags[entry2]);
 #endif
-		    bzero( (caddr_t)MapP2, sizeof(struct Map) );
-		}
-		bzero( (caddr_t)MapP, sizeof(struct Map) );
-		if (! p->RIONoMessage)
-		    cprintf("An orphaned RTA has been adopted by %s '%s' (%c).\n",MyType,MyName,MyLink+'A');
-	    }
-	    else if (! p->RIONoMessage)
-		cprintf("RTA connected to %s '%s' (%c) not configured.\n",MyType,MyName,MyLink+'A');
-	    RIOSetChange(p);
-	    return TRUE;
+				bzero((caddr_t) MapP2, sizeof(struct Map));
+			}
+			bzero((caddr_t) MapP, sizeof(struct Map));
+			if (!p->RIONoMessage)
+				cprintf("An orphaned RTA has been adopted by %s '%s' (%c).\n", MyType, MyName, MyLink + 'A');
+		} else if (!p->RIONoMessage)
+			cprintf("RTA connected to %s '%s' (%c) not configured.\n", MyType, MyName, MyLink + 'A');
+		RIOSetChange(p);
+		return TRUE;
 	}
 
 	/*
-	** There is no room in the driver table to make an entry for the
-	** booted RTA. Keep a note of its Uniq Num in the overflow table,
-	** so we can ignore it's ID requests.
-	*/
-	if (! p->RIONoMessage)
-	    cprintf("The RTA connected to %s '%s' (%c) cannot be configured.  You cannot configure more than 128 ports to one host card.\n",MyType,MyName,MyLink+'A');
-	for ( entry=0; entry<HostP->NumExtraBooted; entry++ )
-	{
-	    if ( HostP->ExtraUnits[entry] == RtaUniq )
-	    {
-		/*
-		** already got it!
-		*/
-		return TRUE;
-	    }
+	 ** There is no room in the driver table to make an entry for the
+	 ** booted RTA. Keep a note of its Uniq Num in the overflow table,
+	 ** so we can ignore it's ID requests.
+	 */
+	if (!p->RIONoMessage)
+		cprintf("The RTA connected to %s '%s' (%c) cannot be configured.  You cannot configure more than 128 ports to one host card.\n", MyType, MyName, MyLink + 'A');
+	for (entry = 0; entry < HostP->NumExtraBooted; entry++) {
+		if (HostP->ExtraUnits[entry] == RtaUniq) {
+			/*
+			 ** already got it!
+			 */
+			return TRUE;
+		}
 	}
 	/*
-	** If there is room, add the unit to the list of extras
-	*/
-	if ( HostP->NumExtraBooted < MAX_EXTRA_UNITS )
-	    HostP->ExtraUnits[HostP->NumExtraBooted++] = RtaUniq;
+	 ** If there is room, add the unit to the list of extras
+	 */
+	if (HostP->NumExtraBooted < MAX_EXTRA_UNITS)
+		HostP->ExtraUnits[HostP->NumExtraBooted++] = RtaUniq;
 	return TRUE;
 }
 
@@ -1226,25 +1127,20 @@ static int RIOBootComplete( struct rio_info *p, struct Host *HostP, uint Rup, st
 ** We no longer support the RIOBootMode variable. It is all done from the
 ** "boot/noboot" field in the rio.cf file.
 */
-int
-RIOBootOk(p, HostP, RtaUniq)
-struct rio_info *	p;
-struct Host *		HostP;
+int RIOBootOk(p, HostP, RtaUniq)
+struct rio_info *p;
+struct Host *HostP;
 ulong RtaUniq;
 {
-    int		Entry;
-    uint HostUniq = HostP->UniqueNum;
+	int Entry;
+	uint HostUniq = HostP->UniqueNum;
 
 	/*
-	** Search bindings table for RTA or its parent.
-	** If it exists, return 0, else 1.
-	*/
-	for (Entry = 0;
-	    ( Entry < MAX_RTA_BINDINGS ) && ( p->RIOBindTab[Entry] != 0 );
-	    Entry++)
-	{
-		if ( (p->RIOBindTab[Entry] == HostUniq) ||
-		     (p->RIOBindTab[Entry] == RtaUniq) )
+	 ** Search bindings table for RTA or its parent.
+	 ** If it exists, return 0, else 1.
+	 */
+	for (Entry = 0; (Entry < MAX_RTA_BINDINGS) && (p->RIOBindTab[Entry] != 0); Entry++) {
+		if ((p->RIOBindTab[Entry] == HostUniq) || (p->RIOBindTab[Entry] == RtaUniq))
 			return 0;
 	}
 	return 1;
@@ -1255,16 +1151,15 @@ ulong RtaUniq;
 ** slots tentative, and the second one RTA_SECOND_SLOT as well.
 */
 
-void
-FillSlot(entry, entry2, RtaUniq, HostP)
+void FillSlot(entry, entry2, RtaUniq, HostP)
 int entry;
 int entry2;
 uint RtaUniq;
 struct Host *HostP;
 {
-	int		link;
+	int link;
 
-	rio_dprintk (RIO_DEBUG_BOOT, "FillSlot(%d, %d, 0x%x...)\n", entry, entry2, RtaUniq);
+	rio_dprintk(RIO_DEBUG_BOOT, "FillSlot(%d, %d, 0x%x...)\n", entry, entry2, RtaUniq);
 
 	HostP->Mapping[entry].Flags = (RTA_BOOTED | RTA_NEWBOOT | SLOT_TENTATIVE);
 	HostP->Mapping[entry].SysPort = NO_PORT;
@@ -1273,8 +1168,7 @@ struct Host *HostP;
 	HostP->Mapping[entry].ID = entry + 1;
 	HostP->Mapping[entry].ID2 = 0;
 	if (entry2) {
-		HostP->Mapping[entry2].Flags = (RTA_BOOTED | RTA_NEWBOOT | 
-								SLOT_TENTATIVE | RTA16_SECOND_SLOT);
+		HostP->Mapping[entry2].Flags = (RTA_BOOTED | RTA_NEWBOOT | SLOT_TENTATIVE | RTA16_SECOND_SLOT);
 		HostP->Mapping[entry2].SysPort = NO_PORT;
 		HostP->Mapping[entry2].RtaUniqueNum = RtaUniq;
 		HostP->Mapping[entry2].HostUniqueNum = HostP->UniqueNum;
@@ -1284,10 +1178,10 @@ struct Host *HostP;
 		HostP->Mapping[entry].ID2 = entry2 + 1;
 	}
 	/*
-	** Must set these up, so that utilities show
-	** topology of 16 port RTAs correctly
-	*/
-	for ( link=0; link<LINKS_PER_UNIT; link++ ) {
+	 ** Must set these up, so that utilities show
+	 ** topology of 16 port RTAs correctly
+	 */
+	for (link = 0; link < LINKS_PER_UNIT; link++) {
 		HostP->Mapping[entry].Topology[link].Unit = ROUTE_DISCONNECT;
 		HostP->Mapping[entry].Topology[link].Link = NO_LINK;
 		if (entry2) {
@@ -1296,4 +1190,3 @@ struct Host *HostP;
 		}
 	}
 }
-