Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 840 insertions, 0 deletions

diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
new file mode 100644
index 00000000000..ac57fdc8711
--- /dev/null
+++ b/drivers/serial/amba-pl010.c
@@ -0,0 +1,840 @@
+/*
+ *  linux/drivers/char/amba.c
+ *
+ *  Driver for AMBA serial ports
+ *
+ *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ *  Copyright 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ *  $Id: amba.c,v 1.41 2002/07/28 10:03:27 rmk Exp $
+ *
+ * This is a generic driver for ARM AMBA-type serial ports.  They
+ * have a lot of 16550-like features, but are not register compatible.
+ * Note that although they do have CTS, DCD and DSR inputs, they do
+ * not have an RI input, nor do they have DTR or RTS outputs.  If
+ * required, these have to be supplied via some other means (eg, GPIO)
+ * and hooked into this driver.
+ */
+#include <linux/config.h>
+
+#if defined(CONFIG_SERIAL_AMBA_PL010_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/hardware/amba.h>
+#include <asm/hardware/amba_serial.h>
+
+#define UART_NR		2
+
+#define SERIAL_AMBA_MAJOR	204
+#define SERIAL_AMBA_MINOR	16
+#define SERIAL_AMBA_NR		UART_NR
+
+#define AMBA_ISR_PASS_LIMIT	256
+
+/*
+ * Access macros for the AMBA UARTs
+ */
+#define UART_GET_INT_STATUS(p)	readb((p)->membase + UART010_IIR)
+#define UART_PUT_ICR(p, c)	writel((c), (p)->membase + UART010_ICR)
+#define UART_GET_FR(p)		readb((p)->membase + UART01x_FR)
+#define UART_GET_CHAR(p)	readb((p)->membase + UART01x_DR)
+#define UART_PUT_CHAR(p, c)	writel((c), (p)->membase + UART01x_DR)
+#define UART_GET_RSR(p)		readb((p)->membase + UART01x_RSR)
+#define UART_GET_CR(p)		readb((p)->membase + UART010_CR)
+#define UART_PUT_CR(p,c)	writel((c), (p)->membase + UART010_CR)
+#define UART_GET_LCRL(p)	readb((p)->membase + UART010_LCRL)
+#define UART_PUT_LCRL(p,c)	writel((c), (p)->membase + UART010_LCRL)
+#define UART_GET_LCRM(p)	readb((p)->membase + UART010_LCRM)
+#define UART_PUT_LCRM(p,c)	writel((c), (p)->membase + UART010_LCRM)
+#define UART_GET_LCRH(p)	readb((p)->membase + UART010_LCRH)
+#define UART_PUT_LCRH(p,c)	writel((c), (p)->membase + UART010_LCRH)
+#define UART_RX_DATA(s)		(((s) & UART01x_FR_RXFE) == 0)
+#define UART_TX_READY(s)	(((s) & UART01x_FR_TXFF) == 0)
+#define UART_TX_EMPTY(p)	((UART_GET_FR(p) & UART01x_FR_TMSK) == 0)
+
+#define UART_DUMMY_RSR_RX	/*256*/0
+#define UART_PORT_SIZE		64
+
+/*
+ * On the Integrator platform, the port RTS and DTR are provided by
+ * bits in the following SC_CTRLS register bits:
+ *        RTS  DTR
+ *  UART0  7    6
+ *  UART1  5    4
+ */
+#define SC_CTRLC	(IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLC_OFFSET)
+#define SC_CTRLS	(IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLS_OFFSET)
+
+/*
+ * We wrap our port structure around the generic uart_port.
+ */
+struct uart_amba_port {
+	struct uart_port	port;
+	unsigned int		dtr_mask;
+	unsigned int		rts_mask;
+	unsigned int		old_status;
+};
+
+static void pl010_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+	unsigned int cr;
+
+	cr = UART_GET_CR(port);
+	cr &= ~UART010_CR_TIE;
+	UART_PUT_CR(port, cr);
+}
+
+static void pl010_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+	unsigned int cr;
+
+	cr = UART_GET_CR(port);
+	cr |= UART010_CR_TIE;
+	UART_PUT_CR(port, cr);
+}
+
+static void pl010_stop_rx(struct uart_port *port)
+{
+	unsigned int cr;
+
+	cr = UART_GET_CR(port);
+	cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
+	UART_PUT_CR(port, cr);
+}
+
+static void pl010_enable_ms(struct uart_port *port)
+{
+	unsigned int cr;
+
+	cr = UART_GET_CR(port);
+	cr |= UART010_CR_MSIE;
+	UART_PUT_CR(port, cr);
+}
+
+static void
+#ifdef SUPPORT_SYSRQ
+pl010_rx_chars(struct uart_port *port, struct pt_regs *regs)
+#else
+pl010_rx_chars(struct uart_port *port)
+#endif
+{
+	struct tty_struct *tty = port->info->tty;
+	unsigned int status, ch, flag, rsr, max_count = 256;
+
+	status = UART_GET_FR(port);
+	while (UART_RX_DATA(status) && max_count--) {
+		if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
+			if (tty->low_latency)
+				tty_flip_buffer_push(tty);
+			/*
+			 * If this failed then we will throw away the
+			 * bytes but must do so to clear interrupts.
+			 */
+		}
+
+		ch = UART_GET_CHAR(port);
+		flag = TTY_NORMAL;
+
+		port->icount.rx++;
+
+		/*
+		 * Note that the error handling code is
+		 * out of the main execution path
+		 */
+		rsr = UART_GET_RSR(port) | UART_DUMMY_RSR_RX;
+		if (rsr & UART01x_RSR_ANY) {
+			if (rsr & UART01x_RSR_BE) {
+				rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
+				port->icount.brk++;
+				if (uart_handle_break(port))
+					goto ignore_char;
+			} else if (rsr & UART01x_RSR_PE)
+				port->icount.parity++;
+			else if (rsr & UART01x_RSR_FE)
+				port->icount.frame++;
+			if (rsr & UART01x_RSR_OE)
+				port->icount.overrun++;
+
+			rsr &= port->read_status_mask;
+
+			if (rsr & UART01x_RSR_BE)
+				flag = TTY_BREAK;
+			else if (rsr & UART01x_RSR_PE)
+				flag = TTY_PARITY;
+			else if (rsr & UART01x_RSR_FE)
+				flag = TTY_FRAME;
+		}
+
+		if (uart_handle_sysrq_char(port, ch, regs))
+			goto ignore_char;
+
+		if ((rsr & port->ignore_status_mask) == 0) {
+			tty_insert_flip_char(tty, ch, flag);
+		}
+		if ((rsr & UART01x_RSR_OE) &&
+		    tty->flip.count < TTY_FLIPBUF_SIZE) {
+			/*
+			 * Overrun is special, since it's reported
+			 * immediately, and doesn't affect the current
+			 * character
+			 */
+			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+		}
+	ignore_char:
+		status = UART_GET_FR(port);
+	}
+	tty_flip_buffer_push(tty);
+	return;
+}
+
+static void pl010_tx_chars(struct uart_port *port)
+{
+	struct circ_buf *xmit = &port->info->xmit;
+	int count;
+
+	if (port->x_char) {
+		UART_PUT_CHAR(port, port->x_char);
+		port->icount.tx++;
+		port->x_char = 0;
+		return;
+	}
+	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+		pl010_stop_tx(port, 0);
+		return;
+	}
+
+	count = port->fifosize >> 1;
+	do {
+		UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+		if (uart_circ_empty(xmit))
+			break;
+	} while (--count > 0);
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	if (uart_circ_empty(xmit))
+		pl010_stop_tx(port, 0);
+}
+
+static void pl010_modem_status(struct uart_port *port)
+{
+	struct uart_amba_port *uap = (struct uart_amba_port *)port;
+	unsigned int status, delta;
+
+	UART_PUT_ICR(&uap->port, 0);
+
+	status = UART_GET_FR(&uap->port) & UART01x_FR_MODEM_ANY;
+
+	delta = status ^ uap->old_status;
+	uap->old_status = status;
+
+	if (!delta)
+		return;
+
+	if (delta & UART01x_FR_DCD)
+		uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD);
+
+	if (delta & UART01x_FR_DSR)
+		uap->port.icount.dsr++;
+
+	if (delta & UART01x_FR_CTS)
+		uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS);
+
+	wake_up_interruptible(&uap->port.info->delta_msr_wait);
+}
+
+static irqreturn_t pl010_int(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct uart_port *port = dev_id;
+	unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT;
+	int handled = 0;
+
+	spin_lock(&port->lock);
+
+	status = UART_GET_INT_STATUS(port);
+	if (status) {
+		do {
+			if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
+#ifdef SUPPORT_SYSRQ
+				pl010_rx_chars(port, regs);
+#else
+				pl010_rx_chars(port);
+#endif
+			if (status & UART010_IIR_MIS)
+				pl010_modem_status(port);
+			if (status & UART010_IIR_TIS)
+				pl010_tx_chars(port);
+
+			if (pass_counter-- == 0)
+				break;
+
+			status = UART_GET_INT_STATUS(port);
+		} while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
+				   UART010_IIR_TIS));
+		handled = 1;
+	}
+
+	spin_unlock(&port->lock);
+
+	return IRQ_RETVAL(handled);
+}
+
+static unsigned int pl010_tx_empty(struct uart_port *port)
+{
+	return UART_GET_FR(port) & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
+}
+
+static unsigned int pl010_get_mctrl(struct uart_port *port)
+{
+	unsigned int result = 0;
+	unsigned int status;
+
+	status = UART_GET_FR(port);
+	if (status & UART01x_FR_DCD)
+		result |= TIOCM_CAR;
+	if (status & UART01x_FR_DSR)
+		result |= TIOCM_DSR;
+	if (status & UART01x_FR_CTS)
+		result |= TIOCM_CTS;
+
+	return result;
+}
+
+static void pl010_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	struct uart_amba_port *uap = (struct uart_amba_port *)port;
+	unsigned int ctrls = 0, ctrlc = 0;
+
+	if (mctrl & TIOCM_RTS)
+		ctrlc |= uap->rts_mask;
+	else
+		ctrls |= uap->rts_mask;
+
+	if (mctrl & TIOCM_DTR)
+		ctrlc |= uap->dtr_mask;
+	else
+		ctrls |= uap->dtr_mask;
+
+	__raw_writel(ctrls, SC_CTRLS);
+	__raw_writel(ctrlc, SC_CTRLC);
+}
+
+static void pl010_break_ctl(struct uart_port *port, int break_state)
+{
+	unsigned long flags;
+	unsigned int lcr_h;
+
+	spin_lock_irqsave(&port->lock, flags);
+	lcr_h = UART_GET_LCRH(port);
+	if (break_state == -1)
+		lcr_h |= UART01x_LCRH_BRK;
+	else
+		lcr_h &= ~UART01x_LCRH_BRK;
+	UART_PUT_LCRH(port, lcr_h);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int pl010_startup(struct uart_port *port)
+{
+	struct uart_amba_port *uap = (struct uart_amba_port *)port;
+	int retval;
+
+	/*
+	 * Allocate the IRQ
+	 */
+	retval = request_irq(port->irq, pl010_int, 0, "uart-pl010", port);
+	if (retval)
+		return retval;
+
+	/*
+	 * initialise the old status of the modem signals
+	 */
+	uap->old_status = UART_GET_FR(port) & UART01x_FR_MODEM_ANY;
+
+	/*
+	 * Finally, enable interrupts
+	 */
+	UART_PUT_CR(port, UART01x_CR_UARTEN | UART010_CR_RIE |
+			  UART010_CR_RTIE);
+
+	return 0;
+}
+
+static void pl010_shutdown(struct uart_port *port)
+{
+	/*
+	 * Free the interrupt
+	 */
+	free_irq(port->irq, port);
+
+	/*
+	 * disable all interrupts, disable the port
+	 */
+	UART_PUT_CR(port, 0);
+
+	/* disable break condition and fifos */
+	UART_PUT_LCRH(port, UART_GET_LCRH(port) &
+		~(UART01x_LCRH_BRK | UART01x_LCRH_FEN));
+}
+
+static void
+pl010_set_termios(struct uart_port *port, struct termios *termios,
+		     struct termios *old)
+{
+	unsigned int lcr_h, old_cr;
+	unsigned long flags;
+	unsigned int baud, quot;
+
+	/*
+	 * Ask the core to calculate the divisor for us.
+	 */
+	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); 
+	quot = uart_get_divisor(port, baud);
+
+	switch (termios->c_cflag & CSIZE) {
+	case CS5:
+		lcr_h = UART01x_LCRH_WLEN_5;
+		break;
+	case CS6:
+		lcr_h = UART01x_LCRH_WLEN_6;
+		break;
+	case CS7:
+		lcr_h = UART01x_LCRH_WLEN_7;
+		break;
+	default: // CS8
+		lcr_h = UART01x_LCRH_WLEN_8;
+		break;
+	}
+	if (termios->c_cflag & CSTOPB)
+		lcr_h |= UART01x_LCRH_STP2;
+	if (termios->c_cflag & PARENB) {
+		lcr_h |= UART01x_LCRH_PEN;
+		if (!(termios->c_cflag & PARODD))
+			lcr_h |= UART01x_LCRH_EPS;
+	}
+	if (port->fifosize > 1)
+		lcr_h |= UART01x_LCRH_FEN;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/*
+	 * Update the per-port timeout.
+	 */
+	uart_update_timeout(port, termios->c_cflag, baud);
+
+	port->read_status_mask = UART01x_RSR_OE;
+	if (termios->c_iflag & INPCK)
+		port->read_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE;
+	if (termios->c_iflag & (BRKINT | PARMRK))
+		port->read_status_mask |= UART01x_RSR_BE;
+
+	/*
+	 * Characters to ignore
+	 */
+	port->ignore_status_mask = 0;
+	if (termios->c_iflag & IGNPAR)
+		port->ignore_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE;
+	if (termios->c_iflag & IGNBRK) {
+		port->ignore_status_mask |= UART01x_RSR_BE;
+		/*
+		 * If we're ignoring parity and break indicators,
+		 * ignore overruns too (for real raw support).
+		 */
+		if (termios->c_iflag & IGNPAR)
+			port->ignore_status_mask |= UART01x_RSR_OE;
+	}
+
+	/*
+	 * Ignore all characters if CREAD is not set.
+	 */
+	if ((termios->c_cflag & CREAD) == 0)
+		port->ignore_status_mask |= UART_DUMMY_RSR_RX;
+
+	/* first, disable everything */
+	old_cr = UART_GET_CR(port) & ~UART010_CR_MSIE;
+
+	if (UART_ENABLE_MS(port, termios->c_cflag))
+		old_cr |= UART010_CR_MSIE;
+
+	UART_PUT_CR(port, 0);
+
+	/* Set baud rate */
+	quot -= 1;
+	UART_PUT_LCRM(port, ((quot & 0xf00) >> 8));
+	UART_PUT_LCRL(port, (quot & 0xff));
+
+	/*
+	 * ----------v----------v----------v----------v-----
+	 * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
+	 * ----------^----------^----------^----------^-----
+	 */
+	UART_PUT_LCRH(port, lcr_h);
+	UART_PUT_CR(port, old_cr);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *pl010_type(struct uart_port *port)
+{
+	return port->type == PORT_AMBA ? "AMBA" : NULL;
+}
+
+/*
+ * Release the memory region(s) being used by 'port'
+ */
+static void pl010_release_port(struct uart_port *port)
+{
+	release_mem_region(port->mapbase, UART_PORT_SIZE);
+}
+
+/*
+ * Request the memory region(s) being used by 'port'
+ */
+static int pl010_request_port(struct uart_port *port)
+{
+	return request_mem_region(port->mapbase, UART_PORT_SIZE, "uart-pl010")
+			!= NULL ? 0 : -EBUSY;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void pl010_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE) {
+		port->type = PORT_AMBA;
+		pl010_request_port(port);
+	}
+}
+
+/*
+ * verify the new serial_struct (for TIOCSSERIAL).
+ */
+static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+	int ret = 0;
+	if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA)
+		ret = -EINVAL;
+	if (ser->irq < 0 || ser->irq >= NR_IRQS)
+		ret = -EINVAL;
+	if (ser->baud_base < 9600)
+		ret = -EINVAL;
+	return ret;
+}
+
+static struct uart_ops amba_pl010_pops = {
+	.tx_empty	= pl010_tx_empty,
+	.set_mctrl	= pl010_set_mctrl,
+	.get_mctrl	= pl010_get_mctrl,
+	.stop_tx	= pl010_stop_tx,
+	.start_tx	= pl010_start_tx,
+	.stop_rx	= pl010_stop_rx,
+	.enable_ms	= pl010_enable_ms,
+	.break_ctl	= pl010_break_ctl,
+	.startup	= pl010_startup,
+	.shutdown	= pl010_shutdown,
+	.set_termios	= pl010_set_termios,
+	.type		= pl010_type,
+	.release_port	= pl010_release_port,
+	.request_port	= pl010_request_port,
+	.config_port	= pl010_config_port,
+	.verify_port	= pl010_verify_port,
+};
+
+static struct uart_amba_port amba_ports[UART_NR] = {
+	{
+		.port	= {
+			.membase	= (void *)IO_ADDRESS(INTEGRATOR_UART0_BASE),
+			.mapbase	= INTEGRATOR_UART0_BASE,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= IRQ_UARTINT0,
+			.uartclk	= 14745600,
+			.fifosize	= 16,
+			.ops		= &amba_pl010_pops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 0,
+		},
+		.dtr_mask	= 1 << 5,
+		.rts_mask	= 1 << 4,
+	},
+	{
+		.port	= {
+			.membase	= (void *)IO_ADDRESS(INTEGRATOR_UART1_BASE),
+			.mapbase	= INTEGRATOR_UART1_BASE,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= IRQ_UARTINT1,
+			.uartclk	= 14745600,
+			.fifosize	= 16,
+			.ops		= &amba_pl010_pops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 1,
+		},
+		.dtr_mask	= 1 << 7,
+		.rts_mask	= 1 << 6,
+	}
+};
+
+#ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
+
+static void
+pl010_console_write(struct console *co, const char *s, unsigned int count)
+{
+	struct uart_port *port = &amba_ports[co->index].port;
+	unsigned int status, old_cr;
+	int i;
+
+	/*
+	 *	First save the CR then disable the interrupts
+	 */
+	old_cr = UART_GET_CR(port);
+	UART_PUT_CR(port, UART01x_CR_UARTEN);
+
+	/*
+	 *	Now, do each character
+	 */
+	for (i = 0; i < count; i++) {
+		do {
+			status = UART_GET_FR(port);
+		} while (!UART_TX_READY(status));
+		UART_PUT_CHAR(port, s[i]);
+		if (s[i] == '\n') {
+			do {
+				status = UART_GET_FR(port);
+			} while (!UART_TX_READY(status));
+			UART_PUT_CHAR(port, '\r');
+		}
+	}
+
+	/*
+	 *	Finally, wait for transmitter to become empty
+	 *	and restore the TCR
+	 */
+	do {
+		status = UART_GET_FR(port);
+	} while (status & UART01x_FR_BUSY);
+	UART_PUT_CR(port, old_cr);
+}
+
+static void __init
+pl010_console_get_options(struct uart_port *port, int *baud,
+			     int *parity, int *bits)
+{
+	if (UART_GET_CR(port) & UART01x_CR_UARTEN) {
+		unsigned int lcr_h, quot;
+		lcr_h = UART_GET_LCRH(port);
+
+		*parity = 'n';
+		if (lcr_h & UART01x_LCRH_PEN) {
+			if (lcr_h & UART01x_LCRH_EPS)
+				*parity = 'e';
+			else
+				*parity = 'o';
+		}
+
+		if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7)
+			*bits = 7;
+		else
+			*bits = 8;
+
+		quot = UART_GET_LCRL(port) | UART_GET_LCRM(port) << 8;
+		*baud = port->uartclk / (16 * (quot + 1));
+	}
+}
+
+static int __init pl010_console_setup(struct console *co, char *options)
+{
+	struct uart_port *port;
+	int baud = 38400;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	/*
+	 * Check whether an invalid uart number has been specified, and
+	 * if so, search for the first available port that does have
+	 * console support.
+	 */
+	if (co->index >= UART_NR)
+		co->index = 0;
+	port = &amba_ports[co->index].port;
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+	else
+		pl010_console_get_options(port, &baud, &parity, &bits);
+
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+extern struct uart_driver amba_reg;
+static struct console amba_console = {
+	.name		= "ttyAM",
+	.write		= pl010_console_write,
+	.device		= uart_console_device,
+	.setup		= pl010_console_setup,
+	.flags		= CON_PRINTBUFFER,
+	.index		= -1,
+	.data		= &amba_reg,
+};
+
+static int __init amba_console_init(void)
+{
+	/*
+	 * All port initializations are done statically
+	 */
+	register_console(&amba_console);
+	return 0;
+}
+console_initcall(amba_console_init);
+
+static int __init amba_late_console_init(void)
+{
+	if (!(amba_console.flags & CON_ENABLED))
+		register_console(&amba_console);
+	return 0;
+}
+late_initcall(amba_late_console_init);
+
+#define AMBA_CONSOLE	&amba_console
+#else
+#define AMBA_CONSOLE	NULL
+#endif
+
+static struct uart_driver amba_reg = {
+	.owner			= THIS_MODULE,
+	.driver_name		= "ttyAM",
+	.dev_name		= "ttyAM",
+	.major			= SERIAL_AMBA_MAJOR,
+	.minor			= SERIAL_AMBA_MINOR,
+	.nr			= UART_NR,
+	.cons			= AMBA_CONSOLE,
+};
+
+static int pl010_probe(struct amba_device *dev, void *id)
+{
+	int i;
+
+	for (i = 0; i < UART_NR; i++) {
+		if (amba_ports[i].port.mapbase != dev->res.start)
+			continue;
+
+		amba_ports[i].port.dev = &dev->dev;
+		uart_add_one_port(&amba_reg, &amba_ports[i].port);
+		amba_set_drvdata(dev, &amba_ports[i]);
+		break;
+	}
+
+	return 0;
+}
+
+static int pl010_remove(struct amba_device *dev)
+{
+	struct uart_amba_port *uap = amba_get_drvdata(dev);
+
+	if (uap)
+		uart_remove_one_port(&amba_reg, &uap->port);
+
+	amba_set_drvdata(dev, NULL);
+
+	return 0;
+}
+
+static int pl010_suspend(struct amba_device *dev, u32 state)
+{
+	struct uart_amba_port *uap = amba_get_drvdata(dev);
+
+	if (uap)
+		uart_suspend_port(&amba_reg, &uap->port);
+
+	return 0;
+}
+
+static int pl010_resume(struct amba_device *dev)
+{
+	struct uart_amba_port *uap = amba_get_drvdata(dev);
+
+	if (uap)
+		uart_resume_port(&amba_reg, &uap->port);
+
+	return 0;
+}
+
+static struct amba_id pl010_ids[] __initdata = {
+	{
+		.id	= 0x00041010,
+		.mask	= 0x000fffff,
+	},
+	{ 0, 0 },
+};
+
+static struct amba_driver pl010_driver = {
+	.drv = {
+		.name	= "uart-pl010",
+	},
+	.id_table	= pl010_ids,
+	.probe		= pl010_probe,
+	.remove		= pl010_remove,
+	.suspend	= pl010_suspend,
+	.resume		= pl010_resume,
+};
+
+static int __init pl010_init(void)
+{
+	int ret;
+
+	printk(KERN_INFO "Serial: AMBA driver $Revision: 1.41 $\n");
+
+	ret = uart_register_driver(&amba_reg);
+	if (ret == 0) {
+		ret = amba_driver_register(&pl010_driver);
+		if (ret)
+			uart_unregister_driver(&amba_reg);
+	}
+	return ret;
+}
+
+static void __exit pl010_exit(void)
+{
+	amba_driver_unregister(&pl010_driver);
+	uart_unregister_driver(&amba_reg);
+}
+
+module_init(pl010_init);
+module_exit(pl010_exit);
+
+MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd");
+MODULE_DESCRIPTION("ARM AMBA serial port driver $Revision: 1.41 $");
+MODULE_LICENSE("GPL");