Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1184 insertions, 0 deletions

diff --git a/drivers/net/saa9730.c b/drivers/net/saa9730.c
new file mode 100644
index 00000000000..fd0167077fb
--- /dev/null
+++ b/drivers/net/saa9730.c
@@ -0,0 +1,1184 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * SAA9730 ethernet driver.
+ *
+ * Changes:
+ * Angelo Dell'Aera <buffer@antifork.org> : Conversion to the new PCI API (pci_driver).
+ *                                          Conversion to spinlocks.
+ *                                          Error handling fixes.
+ *                                           
+ */
+
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/module.h>
+#include <linux/skbuff.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+
+#include <asm/addrspace.h>
+#include <asm/mips-boards/prom.h>
+
+#include "saa9730.h"
+
+#ifdef LAN_SAA9730_DEBUG
+int lan_saa9730_debug = LAN_SAA9730_DEBUG;
+#else
+int lan_saa9730_debug;
+#endif
+
+#define DRV_MODULE_NAME "saa9730"
+
+static struct pci_device_id saa9730_pci_tbl[] = {
+	{ PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA9370,
+          PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, saa9730_pci_tbl);
+
+/* Non-zero only if the current card is a PCI with BIOS-set IRQ. */
+static unsigned int pci_irq_line;
+
+#define INL(a)     inl((unsigned long)a)
+#define OUTL(x,a)  outl(x,(unsigned long)a)
+
+static void evm_saa9730_enable_lan_int(struct lan_saa9730_private *lp)
+{
+	OUTL(INL(&lp->evm_saa9730_regs->InterruptBlock1) | EVM_LAN_INT,
+	     &lp->evm_saa9730_regs->InterruptBlock1);
+	OUTL(INL(&lp->evm_saa9730_regs->InterruptStatus1) | EVM_LAN_INT,
+	     &lp->evm_saa9730_regs->InterruptStatus1);
+	OUTL(INL(&lp->evm_saa9730_regs->InterruptEnable1) | EVM_LAN_INT |
+	     EVM_MASTER_EN, &lp->evm_saa9730_regs->InterruptEnable1);
+}
+static void evm_saa9730_disable_lan_int(struct lan_saa9730_private *lp)
+{
+	OUTL(INL(&lp->evm_saa9730_regs->InterruptBlock1) & ~EVM_LAN_INT,
+	     &lp->evm_saa9730_regs->InterruptBlock1);
+	OUTL(INL(&lp->evm_saa9730_regs->InterruptEnable1) & ~EVM_LAN_INT,
+	     &lp->evm_saa9730_regs->InterruptEnable1);
+}
+
+static void evm_saa9730_clear_lan_int(struct lan_saa9730_private *lp)
+{
+	OUTL(EVM_LAN_INT, &lp->evm_saa9730_regs->InterruptStatus1);
+}
+
+static void evm_saa9730_block_lan_int(struct lan_saa9730_private *lp)
+{
+	OUTL(INL(&lp->evm_saa9730_regs->InterruptBlock1) & ~EVM_LAN_INT,
+	     &lp->evm_saa9730_regs->InterruptBlock1);
+}
+
+static void evm_saa9730_unblock_lan_int(struct lan_saa9730_private *lp)
+{
+	OUTL(INL(&lp->evm_saa9730_regs->InterruptBlock1) | EVM_LAN_INT,
+	     &lp->evm_saa9730_regs->InterruptBlock1);
+}
+
+static void show_saa9730_regs(struct lan_saa9730_private *lp)
+{
+	int i, j;
+	printk("TxmBufferA = %x\n", lp->TxmBuffer[0][0]);
+	printk("TxmBufferB = %x\n", lp->TxmBuffer[1][0]);
+	printk("RcvBufferA = %x\n", lp->RcvBuffer[0][0]);
+	printk("RcvBufferB = %x\n", lp->RcvBuffer[1][0]);
+	for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
+		for (j = 0; j < LAN_SAA9730_TXM_Q_SIZE; j++) {
+			printk("TxmBuffer[%d][%d] = %x\n", i, j,
+			       le32_to_cpu(*(unsigned int *)
+					   lp->TxmBuffer[i][j]));
+		}
+	}
+	for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
+		for (j = 0; j < LAN_SAA9730_RCV_Q_SIZE; j++) {
+			printk("RcvBuffer[%d][%d] = %x\n", i, j,
+			       le32_to_cpu(*(unsigned int *)
+					   lp->RcvBuffer[i][j]));
+		}
+	}
+	printk("lp->evm_saa9730_regs->InterruptBlock1 = %x\n",
+	       INL(&lp->evm_saa9730_regs->InterruptBlock1));
+	printk("lp->evm_saa9730_regs->InterruptStatus1 = %x\n",
+	       INL(&lp->evm_saa9730_regs->InterruptStatus1));
+	printk("lp->evm_saa9730_regs->InterruptEnable1 = %x\n",
+	       INL(&lp->evm_saa9730_regs->InterruptEnable1));
+	printk("lp->lan_saa9730_regs->Ok2Use = %x\n",
+	       INL(&lp->lan_saa9730_regs->Ok2Use));
+	printk("lp->NextTxmBufferIndex = %x\n", lp->NextTxmBufferIndex);
+	printk("lp->NextTxmPacketIndex = %x\n", lp->NextTxmPacketIndex);
+	printk("lp->PendingTxmBufferIndex = %x\n",
+	       lp->PendingTxmBufferIndex);
+	printk("lp->PendingTxmPacketIndex = %x\n",
+	       lp->PendingTxmPacketIndex);
+	printk("lp->lan_saa9730_regs->LanDmaCtl = %x\n",
+	       INL(&lp->lan_saa9730_regs->LanDmaCtl));
+	printk("lp->lan_saa9730_regs->DmaStatus = %x\n",
+	       INL(&lp->lan_saa9730_regs->DmaStatus));
+	printk("lp->lan_saa9730_regs->CamCtl = %x\n",
+	       INL(&lp->lan_saa9730_regs->CamCtl));
+	printk("lp->lan_saa9730_regs->TxCtl = %x\n",
+	       INL(&lp->lan_saa9730_regs->TxCtl));
+	printk("lp->lan_saa9730_regs->TxStatus = %x\n",
+	       INL(&lp->lan_saa9730_regs->TxStatus));
+	printk("lp->lan_saa9730_regs->RxCtl = %x\n",
+	       INL(&lp->lan_saa9730_regs->RxCtl));
+	printk("lp->lan_saa9730_regs->RxStatus = %x\n",
+	       INL(&lp->lan_saa9730_regs->RxStatus));
+	for (i = 0; i < LAN_SAA9730_CAM_DWORDS; i++) {
+		OUTL(i, &lp->lan_saa9730_regs->CamAddress);
+		printk("lp->lan_saa9730_regs->CamData = %x\n",
+		       INL(&lp->lan_saa9730_regs->CamData));
+	}
+	printk("lp->stats.tx_packets = %lx\n", lp->stats.tx_packets);
+	printk("lp->stats.tx_errors = %lx\n", lp->stats.tx_errors);
+	printk("lp->stats.tx_aborted_errors = %lx\n",
+	       lp->stats.tx_aborted_errors);
+	printk("lp->stats.tx_window_errors = %lx\n",
+	       lp->stats.tx_window_errors);
+	printk("lp->stats.tx_carrier_errors = %lx\n",
+	       lp->stats.tx_carrier_errors);
+	printk("lp->stats.tx_fifo_errors = %lx\n",
+	       lp->stats.tx_fifo_errors);
+	printk("lp->stats.tx_heartbeat_errors = %lx\n",
+	       lp->stats.tx_heartbeat_errors);
+	printk("lp->stats.collisions = %lx\n", lp->stats.collisions);
+
+	printk("lp->stats.rx_packets = %lx\n", lp->stats.rx_packets);
+	printk("lp->stats.rx_errors = %lx\n", lp->stats.rx_errors);
+	printk("lp->stats.rx_dropped = %lx\n", lp->stats.rx_dropped);
+	printk("lp->stats.rx_crc_errors = %lx\n", lp->stats.rx_crc_errors);
+	printk("lp->stats.rx_frame_errors = %lx\n",
+	       lp->stats.rx_frame_errors);
+	printk("lp->stats.rx_fifo_errors = %lx\n",
+	       lp->stats.rx_fifo_errors);
+	printk("lp->stats.rx_length_errors = %lx\n",
+	       lp->stats.rx_length_errors);
+
+	printk("lp->lan_saa9730_regs->DebugPCIMasterAddr = %x\n",
+	       INL(&lp->lan_saa9730_regs->DebugPCIMasterAddr));
+	printk("lp->lan_saa9730_regs->DebugLanTxStateMachine = %x\n",
+	       INL(&lp->lan_saa9730_regs->DebugLanTxStateMachine));
+	printk("lp->lan_saa9730_regs->DebugLanRxStateMachine = %x\n",
+	       INL(&lp->lan_saa9730_regs->DebugLanRxStateMachine));
+	printk("lp->lan_saa9730_regs->DebugLanTxFifoPointers = %x\n",
+	       INL(&lp->lan_saa9730_regs->DebugLanTxFifoPointers));
+	printk("lp->lan_saa9730_regs->DebugLanRxFifoPointers = %x\n",
+	       INL(&lp->lan_saa9730_regs->DebugLanRxFifoPointers));
+	printk("lp->lan_saa9730_regs->DebugLanCtlStateMachine = %x\n",
+	       INL(&lp->lan_saa9730_regs->DebugLanCtlStateMachine));
+}
+
+static void lan_saa9730_buffer_init(struct lan_saa9730_private *lp)
+{
+	int i, j;
+
+	/* Init RX buffers */
+	for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
+		for (j = 0; j < LAN_SAA9730_RCV_Q_SIZE; j++) {
+			*(unsigned int *) lp->RcvBuffer[i][j] =
+			    cpu_to_le32(RXSF_READY <<
+					RX_STAT_CTL_OWNER_SHF);
+		}
+	}
+
+	/* Init TX buffers */
+	for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
+		for (j = 0; j < LAN_SAA9730_TXM_Q_SIZE; j++) {
+			*(unsigned int *) lp->TxmBuffer[i][j] =
+			    cpu_to_le32(TXSF_EMPTY <<
+					TX_STAT_CTL_OWNER_SHF);
+		}
+	}
+}
+
+static int lan_saa9730_allocate_buffers(struct lan_saa9730_private *lp)
+{
+	unsigned int mem_size;
+	void *Pa;
+	unsigned int i, j, RcvBufferSize, TxmBufferSize;
+	unsigned int buffer_start;
+
+	/* 
+	 * Allocate all RX and TX packets in one chunk. 
+	 * The Rx and Tx packets must be PACKET_SIZE aligned.
+	 */
+	mem_size = ((LAN_SAA9730_RCV_Q_SIZE + LAN_SAA9730_TXM_Q_SIZE) *
+		    LAN_SAA9730_PACKET_SIZE * LAN_SAA9730_BUFFERS) +
+	    LAN_SAA9730_PACKET_SIZE;
+	buffer_start =
+	    (unsigned int) kmalloc(mem_size, GFP_DMA | GFP_KERNEL);
+
+	if (!buffer_start)
+		return -ENOMEM;
+
+	/* 
+	 * Set DMA buffer to kseg1 (uncached).
+	 * Make sure to flush before using it uncached.
+	 */
+	Pa = (void *) KSEG1ADDR((buffer_start + LAN_SAA9730_PACKET_SIZE) &
+				~(LAN_SAA9730_PACKET_SIZE - 1));
+	dma_cache_wback_inv((unsigned long) Pa, mem_size);
+
+	/* Initialize buffer space */
+	RcvBufferSize = LAN_SAA9730_PACKET_SIZE;
+	TxmBufferSize = LAN_SAA9730_PACKET_SIZE;
+	lp->DmaRcvPackets = LAN_SAA9730_RCV_Q_SIZE;
+	lp->DmaTxmPackets = LAN_SAA9730_TXM_Q_SIZE;
+
+	/* Init RX buffers */
+	for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
+		for (j = 0; j < LAN_SAA9730_RCV_Q_SIZE; j++) {
+			*(unsigned int *) Pa =
+			    cpu_to_le32(RXSF_READY <<
+					RX_STAT_CTL_OWNER_SHF);
+			lp->RcvBuffer[i][j] = (unsigned int) Pa;
+			Pa += RcvBufferSize;
+		}
+	}
+
+	/* Init TX buffers */
+	for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
+		for (j = 0; j < LAN_SAA9730_TXM_Q_SIZE; j++) {
+			*(unsigned int *) Pa =
+			    cpu_to_le32(TXSF_EMPTY <<
+					TX_STAT_CTL_OWNER_SHF);
+			lp->TxmBuffer[i][j] = (unsigned int) Pa;
+			Pa += TxmBufferSize;
+		}
+	}
+
+	/* 
+	 * Set rx buffer A and rx buffer B to point to the first two buffer 
+	 * spaces.
+	 */
+	OUTL(PHYSADDR(lp->RcvBuffer[0][0]),
+	     &lp->lan_saa9730_regs->RxBuffA);
+	OUTL(PHYSADDR(lp->RcvBuffer[1][0]),
+	     &lp->lan_saa9730_regs->RxBuffB);
+
+	/* Initialize Buffer Index */
+	lp->NextRcvPacketIndex = 0;
+	lp->NextRcvToUseIsA = 1;
+
+	/* Set current buffer index & next availble packet index */
+	lp->NextTxmPacketIndex = 0;
+	lp->NextTxmBufferIndex = 0;
+	lp->PendingTxmPacketIndex = 0;
+	lp->PendingTxmBufferIndex = 0;
+
+	/* 
+	 * Set txm_buf_a and txm_buf_b to point to the first two buffer
+	 * space 
+	 */
+	OUTL(PHYSADDR(lp->TxmBuffer[0][0]),
+	     &lp->lan_saa9730_regs->TxBuffA);
+	OUTL(PHYSADDR(lp->TxmBuffer[1][0]),
+	     &lp->lan_saa9730_regs->TxBuffB);
+
+	/* Set packet number */
+	OUTL((lp->DmaRcvPackets << PK_COUNT_RX_A_SHF) |
+	     (lp->DmaRcvPackets << PK_COUNT_RX_B_SHF) |
+	     (lp->DmaTxmPackets << PK_COUNT_TX_A_SHF) |
+	     (lp->DmaTxmPackets << PK_COUNT_TX_B_SHF),
+	     &lp->lan_saa9730_regs->PacketCount);
+
+	return 0;
+}
+
+static int lan_saa9730_cam_load(struct lan_saa9730_private *lp)
+{
+	unsigned int i;
+	unsigned char *NetworkAddress;
+
+	NetworkAddress = (unsigned char *) &lp->PhysicalAddress[0][0];
+
+	for (i = 0; i < LAN_SAA9730_CAM_DWORDS; i++) {
+		/* First set address to where data is written */
+		OUTL(i, &lp->lan_saa9730_regs->CamAddress);
+		OUTL((NetworkAddress[0] << 24) | (NetworkAddress[1] << 16)
+		     | (NetworkAddress[2] << 8) | NetworkAddress[3],
+		     &lp->lan_saa9730_regs->CamData);
+		NetworkAddress += 4;
+	}
+	return 0;
+}
+
+static int lan_saa9730_cam_init(struct net_device *dev)
+{
+	struct lan_saa9730_private *lp =
+	    (struct lan_saa9730_private *) dev->priv;
+	unsigned int i;
+
+	/* Copy MAC-address into all entries. */
+	for (i = 0; i < LAN_SAA9730_CAM_ENTRIES; i++) {
+		memcpy((unsigned char *) lp->PhysicalAddress[i],
+		       (unsigned char *) dev->dev_addr, 6);
+	}
+
+	return 0;
+}
+
+static int lan_saa9730_mii_init(struct lan_saa9730_private *lp)
+{
+	int i, l;
+
+	/* Check link status, spin here till station is not busy. */
+	i = 0;
+	while (INL(&lp->lan_saa9730_regs->StationMgmtCtl) & MD_CA_BUSY) {
+		i++;
+		if (i > 100) {
+			printk("Error: lan_saa9730_mii_init: timeout\n");
+			return -1;
+		}
+		mdelay(1);	/* wait 1 ms. */
+	}
+
+	/* Now set the control and address register. */
+	OUTL(MD_CA_BUSY | PHY_STATUS | PHY_ADDRESS << MD_CA_PHY_SHF,
+	     &lp->lan_saa9730_regs->StationMgmtCtl);
+
+	/* check link status, spin here till station is not busy */
+	i = 0;
+	while (INL(&lp->lan_saa9730_regs->StationMgmtCtl) & MD_CA_BUSY) {
+		i++;
+		if (i > 100) {
+			printk("Error: lan_saa9730_mii_init: timeout\n");
+			return -1;
+		}
+		mdelay(1);	/* wait 1 ms. */
+	}
+
+	/* Wait for 1 ms. */
+	mdelay(1);
+
+	/* Check the link status. */
+	if (INL(&lp->lan_saa9730_regs->StationMgmtData) &
+	    PHY_STATUS_LINK_UP) {
+		/* Link is up. */
+		return 0;
+	} else {
+		/* Link is down, reset the PHY first. */
+
+		/* set PHY address = 'CONTROL' */
+		OUTL(PHY_ADDRESS << MD_CA_PHY_SHF | MD_CA_WR | PHY_CONTROL,
+		     &lp->lan_saa9730_regs->StationMgmtCtl);
+
+		/* Wait for 1 ms. */
+		mdelay(1);
+
+		/* set 'CONTROL' = force reset and renegotiate */
+		OUTL(PHY_CONTROL_RESET | PHY_CONTROL_AUTO_NEG |
+		     PHY_CONTROL_RESTART_AUTO_NEG,
+		     &lp->lan_saa9730_regs->StationMgmtData);
+
+		/* Wait for 50 ms. */
+		mdelay(50);
+
+		/* set 'BUSY' to start operation */
+		OUTL(MD_CA_BUSY | PHY_ADDRESS << MD_CA_PHY_SHF | MD_CA_WR |
+		     PHY_CONTROL, &lp->lan_saa9730_regs->StationMgmtCtl);
+
+		/* await completion */
+		i = 0;
+		while (INL(&lp->lan_saa9730_regs->StationMgmtCtl) &
+		       MD_CA_BUSY) {
+			i++;
+			if (i > 100) {
+				printk
+				    ("Error: lan_saa9730_mii_init: timeout\n");
+				return -1;
+			}
+			mdelay(1);	/* wait 1 ms. */
+		}
+
+		/* Wait for 1 ms. */
+		mdelay(1);
+
+		for (l = 0; l < 2; l++) {
+			/* set PHY address = 'STATUS' */
+			OUTL(MD_CA_BUSY | PHY_ADDRESS << MD_CA_PHY_SHF |
+			     PHY_STATUS,
+			     &lp->lan_saa9730_regs->StationMgmtCtl);
+
+			/* await completion */
+			i = 0;
+			while (INL(&lp->lan_saa9730_regs->StationMgmtCtl) &
+			       MD_CA_BUSY) {
+				i++;
+				if (i > 100) {
+					printk
+					    ("Error: lan_saa9730_mii_init: timeout\n");
+					return -1;
+				}
+				mdelay(1);	/* wait 1 ms. */
+			}
+
+			/* wait for 3 sec. */
+			mdelay(3000);
+
+			/* check the link status */
+			if (INL(&lp->lan_saa9730_regs->StationMgmtData) &
+			    PHY_STATUS_LINK_UP) {
+				/* link is up */
+				break;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int lan_saa9730_control_init(struct lan_saa9730_private *lp)
+{
+	/* Initialize DMA control register. */
+	OUTL((LANMB_ANY << DMA_CTL_MAX_XFER_SHF) |
+	     (LANEND_LITTLE << DMA_CTL_ENDIAN_SHF) |
+	     (LAN_SAA9730_RCV_Q_INT_THRESHOLD << DMA_CTL_RX_INT_COUNT_SHF)
+	     | DMA_CTL_RX_INT_TO_EN | DMA_CTL_RX_INT_EN |
+	     DMA_CTL_MAC_RX_INT_EN | DMA_CTL_MAC_TX_INT_EN,
+	     &lp->lan_saa9730_regs->LanDmaCtl);
+
+	/* Initial MAC control register. */
+	OUTL((MACCM_MII << MAC_CONTROL_CONN_SHF) | MAC_CONTROL_FULL_DUP,
+	     &lp->lan_saa9730_regs->MacCtl);
+
+	/* Initialize CAM control register. */
+	OUTL(CAM_CONTROL_COMP_EN | CAM_CONTROL_BROAD_ACC,
+	     &lp->lan_saa9730_regs->CamCtl);
+
+	/* 
+	 * Initialize CAM enable register, only turn on first entry, should
+	 * contain own addr. 
+	 */
+	OUTL(0x0001, &lp->lan_saa9730_regs->CamEnable);
+
+	/* Initialize Tx control register */
+	OUTL(TX_CTL_EN_COMP, &lp->lan_saa9730_regs->TxCtl);
+
+	/* Initialize Rcv control register */
+	OUTL(RX_CTL_STRIP_CRC, &lp->lan_saa9730_regs->RxCtl);
+
+	/* Reset DMA engine */
+	OUTL(DMA_TEST_SW_RESET, &lp->lan_saa9730_regs->DmaTest);
+
+	return 0;
+}
+
+static int lan_saa9730_stop(struct lan_saa9730_private *lp)
+{
+	int i;
+
+	/* Stop DMA first */
+	OUTL(INL(&lp->lan_saa9730_regs->LanDmaCtl) &
+	     ~(DMA_CTL_EN_TX_DMA | DMA_CTL_EN_RX_DMA),
+	     &lp->lan_saa9730_regs->LanDmaCtl);
+
+	/* Set the SW Reset bits in DMA and MAC control registers */
+	OUTL(DMA_TEST_SW_RESET, &lp->lan_saa9730_regs->DmaTest);
+	OUTL(INL(&lp->lan_saa9730_regs->MacCtl) | MAC_CONTROL_RESET,
+	     &lp->lan_saa9730_regs->MacCtl);
+
+	/* 
+	 * Wait for MAC reset to have finished. The reset bit is auto cleared
+	 * when the reset is done.
+	 */
+	i = 0;
+	while (INL(&lp->lan_saa9730_regs->MacCtl) & MAC_CONTROL_RESET) {
+		i++;
+		if (i > 100) {
+			printk
+			    ("Error: lan_sa9730_stop: MAC reset timeout\n");
+			return -1;
+		}
+		mdelay(1);	/* wait 1 ms. */
+	}
+
+	return 0;
+}
+
+static int lan_saa9730_dma_init(struct lan_saa9730_private *lp)
+{
+	/* Stop lan controller. */
+	lan_saa9730_stop(lp);
+
+	OUTL(LAN_SAA9730_DEFAULT_TIME_OUT_CNT,
+	     &lp->lan_saa9730_regs->Timeout);
+
+	return 0;
+}
+
+static int lan_saa9730_start(struct lan_saa9730_private *lp)
+{
+	lan_saa9730_buffer_init(lp);
+
+	/* Initialize Rx Buffer Index */
+	lp->NextRcvPacketIndex = 0;
+	lp->NextRcvToUseIsA = 1;
+
+	/* Set current buffer index & next availble packet index */
+	lp->NextTxmPacketIndex = 0;
+	lp->NextTxmBufferIndex = 0;
+	lp->PendingTxmPacketIndex = 0;
+	lp->PendingTxmBufferIndex = 0;
+
+	OUTL(INL(&lp->lan_saa9730_regs->LanDmaCtl) | DMA_CTL_EN_TX_DMA |
+	     DMA_CTL_EN_RX_DMA, &lp->lan_saa9730_regs->LanDmaCtl);
+
+	/* For Tx, turn on MAC then DMA */
+	OUTL(INL(&lp->lan_saa9730_regs->TxCtl) | TX_CTL_TX_EN,
+	     &lp->lan_saa9730_regs->TxCtl);
+
+	/* For Rx, turn on DMA then MAC */
+	OUTL(INL(&lp->lan_saa9730_regs->RxCtl) | RX_CTL_RX_EN,
+	     &lp->lan_saa9730_regs->RxCtl);
+
+	/* Set Ok2Use to let hardware owns the buffers */
+	OUTL(OK2USE_RX_A | OK2USE_RX_B | OK2USE_TX_A | OK2USE_TX_B,
+	     &lp->lan_saa9730_regs->Ok2Use);
+
+	return 0;
+}
+
+static int lan_saa9730_restart(struct lan_saa9730_private *lp)
+{
+	lan_saa9730_stop(lp);
+	lan_saa9730_start(lp);
+
+	return 0;
+}
+
+static int lan_saa9730_tx(struct net_device *dev)
+{
+	struct lan_saa9730_private *lp =
+	    (struct lan_saa9730_private *) dev->priv;
+	unsigned int *pPacket;
+	unsigned int tx_status;
+
+	if (lan_saa9730_debug > 5)
+		printk("lan_saa9730_tx interrupt\n");
+
+	/* Clear interrupt. */
+	OUTL(DMA_STATUS_MAC_TX_INT, &lp->lan_saa9730_regs->DmaStatus);
+
+	while (1) {
+		pPacket =
+		    (unsigned int *) lp->TxmBuffer[lp->
+						   PendingTxmBufferIndex]
+		    [lp->PendingTxmPacketIndex];
+
+		/* Get status of first packet transmitted. */
+		tx_status = le32_to_cpu(*pPacket);
+
+		/* Check ownership. */
+		if ((tx_status & TX_STAT_CTL_OWNER_MSK) !=
+		    (TXSF_HWDONE << TX_STAT_CTL_OWNER_SHF)) break;
+
+		/* Check for error. */
+		if (tx_status & TX_STAT_CTL_ERROR_MSK) {
+			if (lan_saa9730_debug > 1)
+				printk("lan_saa9730_tx: tx error = %x\n",
+				       tx_status);
+
+			lp->stats.tx_errors++;
+			if (tx_status &
+			    (TX_STATUS_EX_COLL << TX_STAT_CTL_STATUS_SHF))
+				    lp->stats.tx_aborted_errors++;
+			if (tx_status &
+			    (TX_STATUS_LATE_COLL <<
+			     TX_STAT_CTL_STATUS_SHF)) lp->stats.
+	     tx_window_errors++;
+			if (tx_status &
+			    (TX_STATUS_L_CARR << TX_STAT_CTL_STATUS_SHF))
+				    lp->stats.tx_carrier_errors++;
+			if (tx_status &
+			    (TX_STATUS_UNDER << TX_STAT_CTL_STATUS_SHF))
+				    lp->stats.tx_fifo_errors++;
+			if (tx_status &
+			    (TX_STATUS_SQ_ERR << TX_STAT_CTL_STATUS_SHF))
+				    lp->stats.tx_heartbeat_errors++;
+
+			lp->stats.collisions +=
+			    tx_status & TX_STATUS_TX_COLL_MSK;
+		}
+
+		/* Free buffer. */
+		*pPacket =
+		    cpu_to_le32(TXSF_EMPTY << TX_STAT_CTL_OWNER_SHF);
+
+		/* Update pending index pointer. */
+		lp->PendingTxmPacketIndex++;
+		if (lp->PendingTxmPacketIndex >= LAN_SAA9730_TXM_Q_SIZE) {
+			lp->PendingTxmPacketIndex = 0;
+			lp->PendingTxmBufferIndex ^= 1;
+		}
+	}
+
+	/* Make sure A and B are available to hardware. */
+	OUTL(OK2USE_TX_A | OK2USE_TX_B, &lp->lan_saa9730_regs->Ok2Use);
+
+	if (netif_queue_stopped(dev)) {
+		/* The tx buffer is no longer full. */
+		netif_wake_queue(dev);
+	}
+
+	return 0;
+}
+
+static int lan_saa9730_rx(struct net_device *dev)
+{
+	struct lan_saa9730_private *lp =
+	    (struct lan_saa9730_private *) dev->priv;
+	int len = 0;
+	struct sk_buff *skb = 0;
+	unsigned int rx_status;
+	int BufferIndex;
+	int PacketIndex;
+	unsigned int *pPacket;
+	unsigned char *pData;
+
+	if (lan_saa9730_debug > 5)
+		printk("lan_saa9730_rx interrupt\n");
+
+	/* Clear receive interrupts. */
+	OUTL(DMA_STATUS_MAC_RX_INT | DMA_STATUS_RX_INT |
+	     DMA_STATUS_RX_TO_INT, &lp->lan_saa9730_regs->DmaStatus);
+
+	/* Address next packet */
+	if (lp->NextRcvToUseIsA)
+		BufferIndex = 0;
+	else
+		BufferIndex = 1;
+	PacketIndex = lp->NextRcvPacketIndex;
+	pPacket = (unsigned int *) lp->RcvBuffer[BufferIndex][PacketIndex];
+	rx_status = le32_to_cpu(*pPacket);
+
+	/* Process each packet. */
+	while ((rx_status & RX_STAT_CTL_OWNER_MSK) ==
+	       (RXSF_HWDONE << RX_STAT_CTL_OWNER_SHF)) {
+		/* Check the rx status. */
+		if (rx_status & (RX_STATUS_GOOD << RX_STAT_CTL_STATUS_SHF)) {
+			/* Received packet is good. */
+			len = (rx_status & RX_STAT_CTL_LENGTH_MSK) >>
+			    RX_STAT_CTL_LENGTH_SHF;
+
+			pData = (unsigned char *) pPacket;
+			pData += 4;
+			skb = dev_alloc_skb(len + 2);
+			if (skb == 0) {
+				printk
+				    ("%s: Memory squeeze, deferring packet.\n",
+				     dev->name);
+				lp->stats.rx_dropped++;
+			} else {
+				lp->stats.rx_bytes += len;
+				lp->stats.rx_packets++;
+				skb->dev = dev;
+				skb_reserve(skb, 2);	/* 16 byte align */
+				skb_put(skb, len);	/* make room */
+				eth_copy_and_sum(skb,
+						 (unsigned char *) pData,
+						 len, 0);
+				skb->protocol = eth_type_trans(skb, dev);
+				netif_rx(skb);
+				dev->last_rx = jiffies;
+			}
+		} else {
+			/* We got an error packet. */
+			if (lan_saa9730_debug > 2)
+				printk
+				    ("lan_saa9730_rx: We got an error packet = %x\n",
+				     rx_status);
+
+			lp->stats.rx_errors++;
+			if (rx_status &
+			    (RX_STATUS_CRC_ERR << RX_STAT_CTL_STATUS_SHF))
+				    lp->stats.rx_crc_errors++;
+			if (rx_status &
+			    (RX_STATUS_ALIGN_ERR <<
+			     RX_STAT_CTL_STATUS_SHF)) lp->stats.
+	     rx_frame_errors++;
+			if (rx_status &
+			    (RX_STATUS_OVERFLOW << RX_STAT_CTL_STATUS_SHF))
+				    lp->stats.rx_fifo_errors++;
+			if (rx_status &
+			    (RX_STATUS_LONG_ERR << RX_STAT_CTL_STATUS_SHF))
+				    lp->stats.rx_length_errors++;
+		}
+
+		/* Indicate we have processed the buffer. */
+		*pPacket =
+		    cpu_to_le32(RXSF_READY << RX_STAT_CTL_OWNER_SHF);
+
+		/* Go to next packet in sequence. */
+		lp->NextRcvPacketIndex++;
+		if (lp->NextRcvPacketIndex >= LAN_SAA9730_RCV_Q_SIZE) {
+			lp->NextRcvPacketIndex = 0;
+			if (BufferIndex) {
+				lp->NextRcvToUseIsA = 1;
+			} else {
+				lp->NextRcvToUseIsA = 0;
+			}
+		}
+		OUTL(OK2USE_RX_A | OK2USE_RX_B,
+		     &lp->lan_saa9730_regs->Ok2Use);
+
+		/* Address next packet */
+		if (lp->NextRcvToUseIsA)
+			BufferIndex = 0;
+		else
+			BufferIndex = 1;
+		PacketIndex = lp->NextRcvPacketIndex;
+		pPacket =
+		    (unsigned int *) lp->
+		    RcvBuffer[BufferIndex][PacketIndex];
+		rx_status = le32_to_cpu(*pPacket);
+	}
+
+	/* Make sure A and B are available to hardware. */
+	OUTL(OK2USE_RX_A | OK2USE_RX_B, &lp->lan_saa9730_regs->Ok2Use);
+
+	return 0;
+}
+
+static irqreturn_t lan_saa9730_interrupt(const int irq, void *dev_id,
+				  struct pt_regs *regs)
+{
+	struct net_device *dev = (struct net_device *) dev_id;
+	struct lan_saa9730_private *lp =
+	    (struct lan_saa9730_private *) dev->priv;
+
+	if (lan_saa9730_debug > 5)
+		printk("lan_saa9730_interrupt\n");
+
+	/* Disable the EVM LAN interrupt. */
+	evm_saa9730_block_lan_int(lp);
+
+	/* Clear the EVM LAN interrupt. */
+	evm_saa9730_clear_lan_int(lp);
+
+	/* Service pending transmit interrupts. */
+	if (INL(&lp->lan_saa9730_regs->DmaStatus) & DMA_STATUS_MAC_TX_INT)
+		lan_saa9730_tx(dev);
+
+	/* Service pending receive interrupts. */
+	if (INL(&lp->lan_saa9730_regs->DmaStatus) &
+	    (DMA_STATUS_MAC_RX_INT | DMA_STATUS_RX_INT |
+	     DMA_STATUS_RX_TO_INT)) lan_saa9730_rx(dev);
+
+	/* Enable the EVM LAN interrupt. */
+	evm_saa9730_unblock_lan_int(lp);
+
+	return IRQ_HANDLED;
+}
+
+static int lan_saa9730_open_fail(struct net_device *dev)
+{
+	return -ENODEV;
+}
+
+static int lan_saa9730_open(struct net_device *dev)
+{
+	struct lan_saa9730_private *lp =
+	    (struct lan_saa9730_private *) dev->priv;
+
+	/* Associate IRQ with lan_saa9730_interrupt */
+	if (request_irq(dev->irq, &lan_saa9730_interrupt, 0, "SAA9730 Eth",
+			dev)) {
+		printk("lan_saa9730_open: Can't get irq %d\n", dev->irq);
+		return -EAGAIN;
+	}
+
+	/* Enable the Lan interrupt in the event manager. */
+	evm_saa9730_enable_lan_int(lp);
+
+	/* Start the LAN controller */
+	if (lan_saa9730_start(lp))
+		return -1;
+
+	netif_start_queue(dev);
+
+	return 0;
+}
+
+static int lan_saa9730_write(struct lan_saa9730_private *lp,
+			     struct sk_buff *skb, int skblen)
+{
+	unsigned char *pbData = skb->data;
+	unsigned int len = skblen;
+	unsigned char *pbPacketData;
+	unsigned int tx_status;
+	int BufferIndex;
+	int PacketIndex;
+
+	if (lan_saa9730_debug > 5)
+		printk("lan_saa9730_write: skb=%08x\n",
+		       (unsigned int) skb);
+
+	BufferIndex = lp->NextTxmBufferIndex;
+	PacketIndex = lp->NextTxmPacketIndex;
+
+	tx_status =
+	    le32_to_cpu(*(unsigned int *) lp->
+			TxmBuffer[BufferIndex][PacketIndex]);
+	if ((tx_status & TX_STAT_CTL_OWNER_MSK) !=
+	    (TXSF_EMPTY << TX_STAT_CTL_OWNER_SHF)) {
+		if (lan_saa9730_debug > 4)
+			printk
+			    ("lan_saa9730_write: Tx buffer not available: tx_status = %x\n",
+			     tx_status);
+		return -1;
+	}
+
+	lp->NextTxmPacketIndex++;
+	if (lp->NextTxmPacketIndex >= LAN_SAA9730_TXM_Q_SIZE) {
+		lp->NextTxmPacketIndex = 0;
+		lp->NextTxmBufferIndex ^= 1;
+	}
+
+	pbPacketData =
+	    (unsigned char *) lp->TxmBuffer[BufferIndex][PacketIndex];
+	pbPacketData += 4;
+
+	/* copy the bits */
+	memcpy(pbPacketData, pbData, len);
+
+	/* Set transmit status for hardware */
+	*(unsigned int *) lp->TxmBuffer[BufferIndex][PacketIndex] =
+	    cpu_to_le32((TXSF_READY << TX_STAT_CTL_OWNER_SHF) |
+			(TX_STAT_CTL_INT_AFTER_TX << TX_STAT_CTL_FRAME_SHF)
+			| (len << TX_STAT_CTL_LENGTH_SHF));
+
+	/* Set hardware tx buffer. */
+	OUTL(OK2USE_TX_A | OK2USE_TX_B, &lp->lan_saa9730_regs->Ok2Use);
+
+	return 0;
+}
+
+static void lan_saa9730_tx_timeout(struct net_device *dev)
+{
+	struct lan_saa9730_private *lp =
+	    (struct lan_saa9730_private *) dev->priv;
+
+	/* Transmitter timeout, serious problems */
+	lp->stats.tx_errors++;
+	printk("%s: transmit timed out, reset\n", dev->name);
+	/*show_saa9730_regs(lp); */
+	lan_saa9730_restart(lp);
+
+	dev->trans_start = jiffies;
+	netif_start_queue(dev);
+}
+
+static int lan_saa9730_start_xmit(struct sk_buff *skb,
+				  struct net_device *dev)
+{
+	struct lan_saa9730_private *lp =
+	    (struct lan_saa9730_private *) dev->priv;
+	unsigned long flags;
+	int skblen;
+	int len;
+
+	if (lan_saa9730_debug > 4)
+		printk("Send packet: skb=%08x\n", (unsigned int) skb);
+
+	skblen = skb->len;
+
+	spin_lock_irqsave(&lp->lock, flags);
+
+	len = (skblen <= ETH_ZLEN) ? ETH_ZLEN : skblen;
+
+	if (lan_saa9730_write(lp, skb, skblen)) {
+		spin_unlock_irqrestore(&lp->lock, flags);
+		printk("Error when writing packet to controller: skb=%08x\n",
+		     (unsigned int) skb);
+		netif_stop_queue(dev);
+		return -1;
+	}
+
+	lp->stats.tx_bytes += len;
+	lp->stats.tx_packets++;
+
+	dev->trans_start = jiffies;
+	netif_start_queue(dev);
+	dev_kfree_skb(skb);
+
+	spin_unlock_irqrestore(&lp->lock, flags);
+
+	return 0;
+}
+
+static int lan_saa9730_close(struct net_device *dev)
+{
+	struct lan_saa9730_private *lp =
+	    (struct lan_saa9730_private *) dev->priv;
+
+	if (lan_saa9730_debug > 1)
+		printk("lan_saa9730_close:\n");
+
+	netif_stop_queue(dev);
+
+	/* Disable the Lan interrupt in the event manager. */
+	evm_saa9730_disable_lan_int(lp);
+
+	/* Stop the controller */
+	if (lan_saa9730_stop(lp))
+		return -1;
+
+	free_irq(dev->irq, (void *) dev);
+
+	return 0;
+}
+
+static struct net_device_stats *lan_saa9730_get_stats(struct net_device
+						      *dev)
+{
+	struct lan_saa9730_private *lp =
+	    (struct lan_saa9730_private *) dev->priv;
+
+	return &lp->stats;
+}
+
+static void lan_saa9730_set_multicast(struct net_device *dev)
+{
+	struct lan_saa9730_private *lp =
+	    (struct lan_saa9730_private *) dev->priv;
+
+	/* Stop the controller */
+	lan_saa9730_stop(lp);
+
+	if (dev->flags & IFF_PROMISC) {
+		/* accept all packets */
+		OUTL(CAM_CONTROL_COMP_EN | CAM_CONTROL_STATION_ACC |
+		     CAM_CONTROL_GROUP_ACC | CAM_CONTROL_BROAD_ACC,
+		     &lp->lan_saa9730_regs->CamCtl);
+	} else {
+		if (dev->flags & IFF_ALLMULTI) {
+			/* accept all multicast packets */
+			OUTL(CAM_CONTROL_COMP_EN | CAM_CONTROL_GROUP_ACC |
+			     CAM_CONTROL_BROAD_ACC,
+			     &lp->lan_saa9730_regs->CamCtl);
+		} else {
+			/* 
+			 * Will handle the multicast stuff later. -carstenl
+			 */
+		}
+	}
+
+	lan_saa9730_restart(lp);
+}
+
+
+static void __devexit saa9730_remove_one(struct pci_dev *pdev)
+{
+        struct net_device *dev = pci_get_drvdata(pdev);
+
+        if (dev) {
+                unregister_netdev(dev);
+
+		if (dev->priv)
+			kfree(dev->priv);
+
+                free_netdev(dev);
+                pci_release_regions(pdev);
+                pci_disable_device(pdev);
+                pci_set_drvdata(pdev, NULL);
+        }
+}
+
+
+static int lan_saa9730_init(struct net_device *dev, int ioaddr, int irq)
+{
+	struct lan_saa9730_private *lp;
+	unsigned char ethernet_addr[6];
+	int ret = 0;
+
+	dev->open = lan_saa9730_open_fail;
+
+	if (get_ethernet_addr(ethernet_addr))
+		return -ENODEV;
+	
+	memcpy(dev->dev_addr, ethernet_addr, 6);
+	dev->base_addr = ioaddr;
+	dev->irq = irq;
+	
+	/* 
+	 * Make certain the data structures used by the controller are aligned 
+	 * and DMAble. 
+	 */
+	/*
+	 *  XXX: that is obviously broken - kfree() won't be happy with us.
+	 */
+	lp = (struct lan_saa9730_private *) (((unsigned long)
+					      kmalloc(sizeof(*lp) + 7,
+						      GFP_DMA | GFP_KERNEL)
+					      + 7) & ~7);
+
+	if (!lp)
+		return -ENOMEM;
+
+	dev->priv = lp;
+	memset(lp, 0, sizeof(*lp));
+
+	/* Set SAA9730 LAN base address. */
+	lp->lan_saa9730_regs = (t_lan_saa9730_regmap *) (ioaddr +
+							 SAA9730_LAN_REGS_ADDR);
+
+	/* Set SAA9730 EVM base address. */
+	lp->evm_saa9730_regs = (t_evm_saa9730_regmap *) (ioaddr +
+							 SAA9730_EVM_REGS_ADDR);
+
+	/* Allocate LAN RX/TX frame buffer space. */
+	/* FIXME: a leak */
+	if ((ret = lan_saa9730_allocate_buffers(lp)))
+		goto out;
+
+	/* Stop LAN controller. */
+	if ((ret = lan_saa9730_stop(lp))) 
+		goto out;
+	
+	/* Initialize CAM registers. */
+	if ((ret = lan_saa9730_cam_init(dev)))
+		goto out;
+
+	/* Initialize MII registers. */
+	if ((ret = lan_saa9730_mii_init(lp)))
+		goto out;
+
+	/* Initialize control registers. */
+	if ((ret = lan_saa9730_control_init(lp))) 
+		goto out;
+        
+	/* Load CAM registers. */
+	if ((ret = lan_saa9730_cam_load(lp))) 
+		goto out;
+	
+	/* Initialize DMA context registers. */
+	if ((ret = lan_saa9730_dma_init(lp)))
+		goto out;
+	
+	spin_lock_init(&lp->lock);
+		
+	dev->open = lan_saa9730_open;
+	dev->hard_start_xmit = lan_saa9730_start_xmit;
+	dev->stop = lan_saa9730_close;
+	dev->get_stats = lan_saa9730_get_stats;
+	dev->set_multicast_list = lan_saa9730_set_multicast;
+	dev->tx_timeout = lan_saa9730_tx_timeout;
+	dev->watchdog_timeo = (HZ >> 1);
+	dev->dma = 0;
+	
+	ret = register_netdev(dev);
+	if (ret)
+		goto out;
+	return 0;
+
+ out:
+	if (dev->priv)
+		kfree(dev->priv);
+	return ret;
+}
+
+
+static int __devinit saa9730_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	struct net_device *dev;
+	unsigned int pci_ioaddr;
+	int err;
+
+	if (lan_saa9730_debug > 1)
+		printk("saa9730.c: PCI bios is present, checking for devices...\n");
+
+	err = -ENOMEM;
+	dev = alloc_etherdev(0);
+	if (!dev)
+		goto out;
+
+	SET_MODULE_OWNER(dev);
+
+	err = pci_enable_device(pdev);
+        if (err) {
+                printk(KERN_ERR "Cannot enable PCI device, aborting.\n");
+                goto out1;
+        }
+
+	err = pci_request_regions(pdev, DRV_MODULE_NAME);
+	if (err) {
+		printk(KERN_ERR "Cannot obtain PCI resources, aborting.\n");
+		goto out2;
+	}
+
+	pci_irq_line = pdev->irq;
+	/* LAN base address in located at BAR 1. */
+
+	pci_ioaddr = pci_resource_start(pdev, 1);
+	pci_set_master(pdev);
+
+	printk("Found SAA9730 (PCI) at %#x, irq %d.\n",
+	       pci_ioaddr, pci_irq_line);
+
+	err = lan_saa9730_init(dev, pci_ioaddr, pci_irq_line);
+	if (err) {
+		printk("Lan init failed");
+		goto out2;
+	}
+
+	pci_set_drvdata(pdev, dev);
+	SET_NETDEV_DEV(dev, &pdev->dev);
+	return 0;
+	
+out2:
+	pci_disable_device(pdev);
+out1:
+	free_netdev(dev);
+out:
+	return err;
+}
+
+
+static struct pci_driver saa9730_driver = {
+	.name           = DRV_MODULE_NAME,
+	.id_table       = saa9730_pci_tbl,
+	.probe          = saa9730_init_one,
+	.remove         = __devexit_p(saa9730_remove_one),
+};
+
+
+static int __init saa9730_init(void)
+{
+        return pci_module_init(&saa9730_driver);
+}
+
+static void __exit saa9730_cleanup(void)
+{
+        pci_unregister_driver(&saa9730_driver);
+}
+
+module_init(saa9730_init);
+module_exit(saa9730_cleanup);
+
+
+
+MODULE_LICENSE("GPL");