ax88796: add 93cx6 eeprom support

Hook up the 93cx6 eeprom code to the ax88796 driver and modify the ax88796
driver to read out the mac address from the eeprom.  We need this for the
ax88796 on certain SuperH boards.  The pin configuration used to connect
the eeprom to the ax88796 on these boards is the same as pointed out by the
ax88796 datasheet, so we can probably reuse this code for multiple
platforms in the future.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 49 insertions, 0 deletions

diff --git a/drivers/net/ax88796.c b/drivers/net/ax88796.c
index 90e0734e603..9fe0517cf89 100644
--- a/drivers/net/ax88796.c
+++ b/drivers/net/ax88796.c
@@ -24,6 +24,7 @@
 #include <linux/etherdevice.h>
 #include <linux/ethtool.h>
 #include <linux/mii.h>
+#include <linux/eeprom_93cx6.h>
 
 #include <net/ax88796.h>
 
@@ -582,6 +583,37 @@ static const struct ethtool_ops ax_ethtool_ops = {
 	.get_link		= ax_get_link,
 };
 
+#ifdef CONFIG_AX88796_93CX6
+static void ax_eeprom_register_read(struct eeprom_93cx6 *eeprom)
+{
+	struct ei_device *ei_local = eeprom->data;
+	u8 reg = ei_inb(ei_local->mem + AX_MEMR);
+
+	eeprom->reg_data_in = reg & AX_MEMR_EEI;
+	eeprom->reg_data_out = reg & AX_MEMR_EEO; /* Input pin */
+	eeprom->reg_data_clock = reg & AX_MEMR_EECLK;
+	eeprom->reg_chip_select = reg & AX_MEMR_EECS;
+}
+
+static void ax_eeprom_register_write(struct eeprom_93cx6 *eeprom)
+{
+	struct ei_device *ei_local = eeprom->data;
+	u8 reg = ei_inb(ei_local->mem + AX_MEMR);
+
+	reg &= ~(AX_MEMR_EEI | AX_MEMR_EECLK | AX_MEMR_EECS);
+
+	if (eeprom->reg_data_in)
+		reg |= AX_MEMR_EEI;
+	if (eeprom->reg_data_clock)
+		reg |= AX_MEMR_EECLK;
+	if (eeprom->reg_chip_select)
+		reg |= AX_MEMR_EECS;
+
+	ei_outb(reg, ei_local->mem + AX_MEMR);
+	udelay(10);
+}
+#endif
+
 /* setup code */
 
 static void ax_initial_setup(struct net_device *dev, struct ei_device *ei_local)
@@ -640,6 +672,23 @@ static int ax_init_dev(struct net_device *dev, int first_init)
 		memcpy(dev->dev_addr,  SA_prom, 6);
 	}
 
+#ifdef CONFIG_AX88796_93CX6
+	if (first_init && ax->plat->flags & AXFLG_HAS_93CX6) {
+		unsigned char mac_addr[6];
+		struct eeprom_93cx6 eeprom;
+
+		eeprom.data = ei_local;
+		eeprom.register_read = ax_eeprom_register_read;
+		eeprom.register_write = ax_eeprom_register_write;
+		eeprom.width = PCI_EEPROM_WIDTH_93C56;
+
+		eeprom_93cx6_multiread(&eeprom, 0,
+				       (__le16 __force *)mac_addr,
+				       sizeof(mac_addr) >> 1);
+
+		memcpy(dev->dev_addr,  mac_addr, 6);
+	}
+#endif
 	if (ax->plat->wordlength == 2) {
 		/* We must set the 8390 for word mode. */
 		ei_outb(ax->plat->dcr_val, ei_local->mem + EN0_DCFG);