Merge master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	drivers/usb/input/Makefile
	drivers/usb/input/gtco.c

1 files changed, 23 insertions, 21 deletions

diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index f2e7115f7ab..987c5fafab0 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -35,7 +35,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_mpiix"
-#define DRV_VERSION "0.7.5"
+#define DRV_VERSION "0.7.6"
 
 enum {
 	IDETIM = 0x6C,		/* IDE control register */
@@ -53,7 +53,6 @@ static int mpiix_pre_reset(struct ata_port *ap)
 
 	if (!pci_test_config_bits(pdev, &mpiix_enable_bits))
 		return -ENOENT;
-	ap->cbl = ATA_CBL_PATA40;
 	return ata_std_prereset(ap);
 }
 
@@ -165,8 +164,10 @@ static struct scsi_host_template mpiix_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
+#ifdef CONFIG_PM
 	.resume			= ata_scsi_device_resume,
 	.suspend		= ata_scsi_device_suspend,
+#endif
 };
 
 static struct ata_port_operations mpiix_port_ops = {
@@ -183,12 +184,12 @@ static struct ata_port_operations mpiix_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= mpiix_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= mpiix_qc_issue_prot,
 	.data_xfer	= ata_data_xfer,
 
-	.irq_handler	= ata_interrupt,
 	.irq_clear	= ata_bmdma_irq_clear,
 	.irq_on		= ata_irq_on,
 	.irq_ack	= ata_irq_ack,
@@ -199,8 +200,9 @@ static struct ata_port_operations mpiix_port_ops = {
 static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	/* Single threaded by the PCI probe logic */
-	static struct ata_probe_ent probe;
 	static int printed_version;
+	struct ata_host *host;
+	struct ata_port *ap;
 	void __iomem *cmd_addr, *ctl_addr;
 	u16 idetim;
 	int irq;
@@ -208,6 +210,10 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
 
+	host = ata_host_alloc(&dev->dev, 1);
+	if (!host)
+		return -ENOMEM;
+
 	/* MPIIX has many functions which can be turned on or off according
 	   to other devices present. Make sure IDE is enabled before we try
 	   and use it */
@@ -236,27 +242,21 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	   without BARs set fools the setup.  #2 If you pci_disable_device
 	   the MPIIX your box goes castors up */
 
-	INIT_LIST_HEAD(&probe.node);
-	probe.dev = pci_dev_to_dev(dev);
-	probe.port_ops = &mpiix_port_ops;
-	probe.sht = &mpiix_sht;
-	probe.pio_mask = 0x1F;
-	probe.irq_flags = IRQF_SHARED;
-	probe.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
-	probe.n_ports = 1;
+	ap = host->ports[0];
+	ap->ops = &mpiix_port_ops;
+	ap->pio_mask = 0x1F;
+	ap->flags |= ATA_FLAG_SLAVE_POSS;
 
-	probe.irq = irq;
-	probe.port[0].cmd_addr = cmd_addr;
-	probe.port[0].ctl_addr = ctl_addr;
-	probe.port[0].altstatus_addr = ctl_addr;
+	ap->ioaddr.cmd_addr = cmd_addr;
+	ap->ioaddr.ctl_addr = ctl_addr;
+	ap->ioaddr.altstatus_addr = ctl_addr;
 
 	/* Let libata fill in the port details */
-	ata_std_ports(&probe.port[0]);
+	ata_std_ports(&ap->ioaddr);
 
-	/* Now add the port that is active */
-	if (ata_device_add(&probe))
-		return 0;
-	return -ENODEV;
+	/* activate host */
+	return ata_host_activate(host, irq, ata_interrupt, IRQF_SHARED,
+				 &mpiix_sht);
 }
 
 static const struct pci_device_id mpiix[] = {
@@ -270,8 +270,10 @@ static struct pci_driver mpiix_pci_driver = {
 	.id_table	= mpiix,
 	.probe 		= mpiix_init_one,
 	.remove		= ata_pci_remove_one,
+#ifdef CONFIG_PM
 	.suspend	= ata_pci_device_suspend,
 	.resume		= ata_pci_device_resume,
+#endif
 };
 
 static int __init mpiix_init(void)