Revert "[ARM] pxa/corgi: remove now unused corgi_ssp.c and corgi_lcd.c"

This reverts commit 68677ab3d08ed6d57be0c1ae4e4d364bb2d104b6.

A smoother migration path would be making corgi_ts.c and other drivers
depending on corgi_ssp.c and corgi_lcd.c to depend on BROKEN instead,
and still allows those to exist around for some time.

Signed-off-by: Eric Miao <eric.miao@marvell.com>

5 files changed, 583 insertions, 2 deletions

diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c
new file mode 100644
index 00000000000..311baf149b0
--- /dev/null
+++ b/arch/arm/mach-pxa/corgi_lcd.c
@@ -0,0 +1,290 @@
+/*
+ * linux/arch/arm/mach-pxa/corgi_lcd.c
+ *
+ * Corgi/Spitz LCD Specific Code
+ *
+ * Copyright (C) 2005 Richard Purdie
+ *
+ * Connectivity:
+ *   Corgi - LCD to ATI Imageon w100 (Wallaby)
+ *   Spitz - LCD to PXA Framebuffer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <mach/akita.h>
+#include <mach/corgi.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/sharpsl.h>
+#include <mach/spitz.h>
+#include <asm/hardware/scoop.h>
+#include <asm/mach/sharpsl_param.h>
+#include "generic.h"
+
+/* Register Addresses */
+#define RESCTL_ADRS     0x00
+#define PHACTRL_ADRS    0x01
+#define DUTYCTRL_ADRS   0x02
+#define POWERREG0_ADRS  0x03
+#define POWERREG1_ADRS  0x04
+#define GPOR3_ADRS      0x05
+#define PICTRL_ADRS     0x06
+#define POLCTRL_ADRS    0x07
+
+/* Register Bit Definitions */
+#define RESCTL_QVGA     0x01
+#define RESCTL_VGA      0x00
+
+#define POWER1_VW_ON    0x01  /* VW Supply FET ON */
+#define POWER1_GVSS_ON  0x02  /* GVSS(-8V) Power Supply ON */
+#define POWER1_VDD_ON   0x04  /* VDD(8V),SVSS(-4V) Power Supply ON */
+
+#define POWER1_VW_OFF   0x00  /* VW Supply FET OFF */
+#define POWER1_GVSS_OFF 0x00  /* GVSS(-8V) Power Supply OFF */
+#define POWER1_VDD_OFF  0x00  /* VDD(8V),SVSS(-4V) Power Supply OFF */
+
+#define POWER0_COM_DCLK 0x01  /* COM Voltage DC Bias DAC Serial Data Clock */
+#define POWER0_COM_DOUT 0x02  /* COM Voltage DC Bias DAC Serial Data Out */
+#define POWER0_DAC_ON   0x04  /* DAC Power Supply ON */
+#define POWER0_COM_ON   0x08  /* COM Power Supply ON */
+#define POWER0_VCC5_ON  0x10  /* VCC5 Power Supply ON */
+
+#define POWER0_DAC_OFF  0x00  /* DAC Power Supply OFF */
+#define POWER0_COM_OFF  0x00  /* COM Power Supply OFF */
+#define POWER0_VCC5_OFF 0x00  /* VCC5 Power Supply OFF */
+
+#define PICTRL_INIT_STATE      0x01
+#define PICTRL_INIOFF          0x02
+#define PICTRL_POWER_DOWN      0x04
+#define PICTRL_COM_SIGNAL_OFF  0x08
+#define PICTRL_DAC_SIGNAL_OFF  0x10
+
+#define POLCTRL_SYNC_POL_FALL  0x01
+#define POLCTRL_EN_POL_FALL    0x02
+#define POLCTRL_DATA_POL_FALL  0x04
+#define POLCTRL_SYNC_ACT_H     0x08
+#define POLCTRL_EN_ACT_L       0x10
+
+#define POLCTRL_SYNC_POL_RISE  0x00
+#define POLCTRL_EN_POL_RISE    0x00
+#define POLCTRL_DATA_POL_RISE  0x00
+#define POLCTRL_SYNC_ACT_L     0x00
+#define POLCTRL_EN_ACT_H       0x00
+
+#define PHACTRL_PHASE_MANUAL   0x01
+#define DEFAULT_PHAD_QVGA     (9)
+#define DEFAULT_COMADJ        (125)
+
+/*
+ * This is only a psuedo I2C interface. We can't use the standard kernel
+ * routines as the interface is write only. We just assume the data is acked...
+ */
+static void lcdtg_ssp_i2c_send(u8 data)
+{
+	corgi_ssp_lcdtg_send(POWERREG0_ADRS, data);
+	udelay(10);
+}
+
+static void lcdtg_i2c_send_bit(u8 data)
+{
+	lcdtg_ssp_i2c_send(data);
+	lcdtg_ssp_i2c_send(data | POWER0_COM_DCLK);
+	lcdtg_ssp_i2c_send(data);
+}
+
+static void lcdtg_i2c_send_start(u8 base)
+{
+	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
+	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
+	lcdtg_ssp_i2c_send(base);
+}
+
+static void lcdtg_i2c_send_stop(u8 base)
+{
+	lcdtg_ssp_i2c_send(base);
+	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
+	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
+}
+
+static void lcdtg_i2c_send_byte(u8 base, u8 data)
+{
+	int i;
+	for (i = 0; i < 8; i++) {
+		if (data & 0x80)
+			lcdtg_i2c_send_bit(base | POWER0_COM_DOUT);
+		else
+			lcdtg_i2c_send_bit(base);
+		data <<= 1;
+	}
+}
+
+static void lcdtg_i2c_wait_ack(u8 base)
+{
+	lcdtg_i2c_send_bit(base);
+}
+
+static void lcdtg_set_common_voltage(u8 base_data, u8 data)
+{
+	/* Set Common Voltage to M62332FP via I2C */
+	lcdtg_i2c_send_start(base_data);
+	lcdtg_i2c_send_byte(base_data, 0x9c);
+	lcdtg_i2c_wait_ack(base_data);
+	lcdtg_i2c_send_byte(base_data, 0x00);
+	lcdtg_i2c_wait_ack(base_data);
+	lcdtg_i2c_send_byte(base_data, data);
+	lcdtg_i2c_wait_ack(base_data);
+	lcdtg_i2c_send_stop(base_data);
+}
+
+/* Set Phase Adjust */
+static void lcdtg_set_phadadj(int mode)
+{
+	int adj;
+	switch(mode) {
+		case 480:
+		case 640:
+			/* Setting for VGA */
+			adj = sharpsl_param.phadadj;
+			if (adj < 0) {
+				adj = PHACTRL_PHASE_MANUAL;
+			} else {
+				adj = ((adj & 0x0f) << 1) | PHACTRL_PHASE_MANUAL;
+			}
+			break;
+		case 240:
+		case 320:
+		default:
+			/* Setting for QVGA */
+			adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL;
+			break;
+	}
+
+	corgi_ssp_lcdtg_send(PHACTRL_ADRS, adj);
+}
+
+static int lcd_inited;
+
+void corgi_lcdtg_hw_init(int mode)
+{
+	if (!lcd_inited) {
+		int comadj;
+
+		/* Initialize Internal Logic & Port */
+		corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_POWER_DOWN | PICTRL_INIOFF | PICTRL_INIT_STATE
+	  			| PICTRL_COM_SIGNAL_OFF | PICTRL_DAC_SIGNAL_OFF);
+
+		corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF
+				| POWER0_COM_OFF | POWER0_VCC5_OFF);
+
+		corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
+
+		/* VDD(+8V), SVSS(-4V) ON */
+		corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
+		mdelay(3);
+
+		/* DAC ON */
+		corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
+				| POWER0_COM_OFF | POWER0_VCC5_OFF);
+
+		/* INIB = H, INI = L  */
+		/* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */
+		corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF);
+
+		/* Set Common Voltage */
+		comadj = sharpsl_param.comadj;
+		if (comadj < 0)
+			comadj = DEFAULT_COMADJ;
+		lcdtg_set_common_voltage((POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF), comadj);
+
+		/* VCC5 ON, DAC ON */
+		corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
+				POWER0_COM_OFF | POWER0_VCC5_ON);
+
+		/* GVSS(-8V) ON, VDD ON */
+		corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
+		mdelay(2);
+
+		/* COM SIGNAL ON (PICTL[3] = L) */
+		corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE);
+
+		/* COM ON, DAC ON, VCC5_ON */
+		corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
+				| POWER0_COM_ON | POWER0_VCC5_ON);
+
+		/* VW ON, GVSS ON, VDD ON */
+		corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON);
+
+		/* Signals output enable */
+		corgi_ssp_lcdtg_send(PICTRL_ADRS, 0);
+
+		/* Set Phase Adjust */
+		lcdtg_set_phadadj(mode);
+
+		/* Initialize for Input Signals from ATI */
+		corgi_ssp_lcdtg_send(POLCTRL_ADRS, POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE
+				| POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L | POLCTRL_EN_ACT_H);
+		udelay(1000);
+
+		lcd_inited=1;
+	} else {
+		lcdtg_set_phadadj(mode);
+	}
+
+	switch(mode) {
+		case 480:
+		case 640:
+			/* Set Lcd Resolution (VGA) */
+			corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_VGA);
+			break;
+		case 240:
+		case 320:
+		default:
+			/* Set Lcd Resolution (QVGA) */
+			corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_QVGA);
+			break;
+	}
+}
+
+void corgi_lcdtg_suspend(void)
+{
+	/* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */
+	mdelay(34);
+
+	/* (1)VW OFF */
+	corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
+
+	/* (2)COM OFF */
+	corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF);
+	corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON);
+
+	/* (3)Set Common Voltage Bias 0V */
+	lcdtg_set_common_voltage(POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON, 0);
+
+	/* (4)GVSS OFF */
+	corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
+
+	/* (5)VCC5 OFF */
+	corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF);
+
+	/* (6)Set PDWN, INIOFF, DACOFF */
+	corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF |
+			PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF);
+
+	/* (7)DAC OFF */
+	corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF);
+
+	/* (8)VDD OFF */
+	corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
+
+	lcd_inited = 0;
+}
+
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
new file mode 100644
index 00000000000..8e2f2215c4b
--- /dev/null
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -0,0 +1,276 @@
+/*
+ *  SSP control code for Sharp Corgi devices
+ *
+ *  Copyright (c) 2004-2005 Richard Purdie
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#include <mach/ssp.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/regs-ssp.h>
+#include "sharpsl.h"
+
+static DEFINE_SPINLOCK(corgi_ssp_lock);
+static struct ssp_dev corgi_ssp_dev;
+static struct ssp_state corgi_ssp_state;
+static struct corgissp_machinfo *ssp_machinfo;
+
+/*
+ * There are three devices connected to the SSP interface:
+ *   1. A touchscreen controller (TI ADS7846 compatible)
+ *   2. An LCD controller (with some Backlight functionality)
+ *   3. A battery monitoring IC (Maxim MAX1111)
+ *
+ * Each device uses a different speed/mode of communication.
+ *
+ * The touchscreen is very sensitive and the most frequently used
+ * so the port is left configured for this.
+ *
+ * Devices are selected using Chip Selects on GPIOs.
+ */
+
+/*
+ *  ADS7846 Routines
+ */
+unsigned long corgi_ssp_ads7846_putget(ulong data)
+{
+	unsigned long flag;
+	u32 ret = 0;
+
+	spin_lock_irqsave(&corgi_ssp_lock, flag);
+	if (ssp_machinfo->cs_ads7846 >= 0)
+		GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
+
+	ssp_write_word(&corgi_ssp_dev,data);
+ 	ssp_read_word(&corgi_ssp_dev, &ret);
+
+	if (ssp_machinfo->cs_ads7846 >= 0)
+		GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
+	spin_unlock_irqrestore(&corgi_ssp_lock, flag);
+
+	return ret;
+}
+
+/*
+ * NOTE: These functions should always be called in interrupt context
+ * and use the _lock and _unlock functions. They are very time sensitive.
+ */
+void corgi_ssp_ads7846_lock(void)
+{
+	spin_lock(&corgi_ssp_lock);
+	if (ssp_machinfo->cs_ads7846 >= 0)
+		GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
+}
+
+void corgi_ssp_ads7846_unlock(void)
+{
+	if (ssp_machinfo->cs_ads7846 >= 0)
+		GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
+	spin_unlock(&corgi_ssp_lock);
+}
+
+void corgi_ssp_ads7846_put(ulong data)
+{
+	ssp_write_word(&corgi_ssp_dev,data);
+}
+
+unsigned long corgi_ssp_ads7846_get(void)
+{
+	u32 ret = 0;
+	ssp_read_word(&corgi_ssp_dev, &ret);
+	return ret;
+}
+
+EXPORT_SYMBOL(corgi_ssp_ads7846_putget);
+EXPORT_SYMBOL(corgi_ssp_ads7846_lock);
+EXPORT_SYMBOL(corgi_ssp_ads7846_unlock);
+EXPORT_SYMBOL(corgi_ssp_ads7846_put);
+EXPORT_SYMBOL(corgi_ssp_ads7846_get);
+
+
+/*
+ *  LCD/Backlight Routines
+ */
+unsigned long corgi_ssp_dac_put(ulong data)
+{
+	unsigned long flag, sscr1 = SSCR1_SPH;
+	u32 tmp;
+
+	spin_lock_irqsave(&corgi_ssp_lock, flag);
+
+	if (machine_is_spitz() || machine_is_akita() || machine_is_borzoi())
+		sscr1 = 0;
+
+	ssp_disable(&corgi_ssp_dev);
+	ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), sscr1, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_lcdcon));
+	ssp_enable(&corgi_ssp_dev);
+
+	if (ssp_machinfo->cs_lcdcon >= 0)
+		GPCR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
+	ssp_write_word(&corgi_ssp_dev,data);
+	/* Read null data back from device to prevent SSP overflow */
+	ssp_read_word(&corgi_ssp_dev, &tmp);
+	if (ssp_machinfo->cs_lcdcon >= 0)
+		GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
+
+	ssp_disable(&corgi_ssp_dev);
+	ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
+	ssp_enable(&corgi_ssp_dev);
+
+	spin_unlock_irqrestore(&corgi_ssp_lock, flag);
+
+	return 0;
+}
+
+void corgi_ssp_lcdtg_send(u8 adrs, u8 data)
+{
+	corgi_ssp_dac_put(((adrs & 0x07) << 5) | (data & 0x1f));
+}
+
+void corgi_ssp_blduty_set(int duty)
+{
+	corgi_ssp_lcdtg_send(0x02,duty);
+}
+
+EXPORT_SYMBOL(corgi_ssp_lcdtg_send);
+EXPORT_SYMBOL(corgi_ssp_blduty_set);
+
+/*
+ *  Max1111 Routines
+ */
+int corgi_ssp_max1111_get(ulong data)
+{
+	unsigned long flag;
+	long voltage = 0, voltage1 = 0, voltage2 = 0;
+
+	spin_lock_irqsave(&corgi_ssp_lock, flag);
+	if (ssp_machinfo->cs_max1111 >= 0)
+		GPCR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);
+	ssp_disable(&corgi_ssp_dev);
+	ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_max1111));
+	ssp_enable(&corgi_ssp_dev);
+
+	udelay(1);
+
+	/* TB1/RB1 */
+	ssp_write_word(&corgi_ssp_dev,data);
+	ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1); /* null read */
+
+	/* TB12/RB2 */
+	ssp_write_word(&corgi_ssp_dev,0);
+	ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1);
+
+	/* TB13/RB3*/
+	ssp_write_word(&corgi_ssp_dev,0);
+	ssp_read_word(&corgi_ssp_dev, (u32*)&voltage2);
+
+	ssp_disable(&corgi_ssp_dev);
+	ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
+	ssp_enable(&corgi_ssp_dev);
+	if (ssp_machinfo->cs_max1111 >= 0)
+		GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);
+	spin_unlock_irqrestore(&corgi_ssp_lock, flag);
+
+	if (voltage1 & 0xc0 || voltage2 & 0x3f)
+		voltage = -1;
+	else
+		voltage = ((voltage1 << 2) & 0xfc) | ((voltage2 >> 6) & 0x03);
+
+	return voltage;
+}
+
+EXPORT_SYMBOL(corgi_ssp_max1111_get);
+
+/*
+ *  Support Routines
+ */
+
+void __init corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo)
+{
+	ssp_machinfo = machinfo;
+}
+
+static int __init corgi_ssp_probe(struct platform_device *dev)
+{
+	int ret;
+
+	/* Chip Select - Disable All */
+	if (ssp_machinfo->cs_lcdcon >= 0)
+		pxa_gpio_mode(ssp_machinfo->cs_lcdcon  | GPIO_OUT | GPIO_DFLT_HIGH);
+	if (ssp_machinfo->cs_max1111 >= 0)
+	        pxa_gpio_mode(ssp_machinfo->cs_max1111 | GPIO_OUT | GPIO_DFLT_HIGH);
+	if (ssp_machinfo->cs_ads7846 >= 0)
+        	pxa_gpio_mode(ssp_machinfo->cs_ads7846 | GPIO_OUT | GPIO_DFLT_HIGH);
+
+	ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0);
+
+	if (ret)
+		printk(KERN_ERR "Unable to register SSP handler!\n");
+	else {
+		ssp_disable(&corgi_ssp_dev);
+		ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
+		ssp_enable(&corgi_ssp_dev);
+	}
+
+	return ret;
+}
+
+static int corgi_ssp_remove(struct platform_device *dev)
+{
+	ssp_exit(&corgi_ssp_dev);
+	return 0;
+}
+
+static int corgi_ssp_suspend(struct platform_device *dev, pm_message_t state)
+{
+	ssp_flush(&corgi_ssp_dev);
+	ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state);
+
+	return 0;
+}
+
+static int corgi_ssp_resume(struct platform_device *dev)
+{
+	if (ssp_machinfo->cs_lcdcon >= 0)
+		GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);  /* High - Disable LCD Control/Timing Gen */
+	if (ssp_machinfo->cs_max1111 >= 0)
+		GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/
+	if (ssp_machinfo->cs_ads7846 >= 0)
+		GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/
+	ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state);
+	ssp_enable(&corgi_ssp_dev);
+
+	return 0;
+}
+
+static struct platform_driver corgissp_driver = {
+	.probe		= corgi_ssp_probe,
+	.remove		= corgi_ssp_remove,
+	.suspend	= corgi_ssp_suspend,
+	.resume		= corgi_ssp_resume,
+	.driver		= {
+		.name	= "corgi-ssp",
+	},
+};
+
+int __init corgi_ssp_init(void)
+{
+	return platform_driver_register(&corgissp_driver);
+}
+
+arch_initcall(corgi_ssp_init);
diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
index 585970ef08c..7239281788d 100644
--- a/arch/arm/mach-pxa/include/mach/corgi.h
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
@@ -113,6 +113,7 @@
  * Shared data structures
  */
 extern struct platform_device corgiscoop_device;
+extern struct platform_device corgissp_device;
 
 #endif /* __ASM_ARCH_CORGI_H  */
 
diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h
index 31ac26b55bc..56088a24615 100644
--- a/arch/arm/mach-pxa/include/mach/spitz.h
+++ b/arch/arm/mach-pxa/include/mach/spitz.h
@@ -187,4 +187,5 @@
  */
 extern struct platform_device spitzscoop_device;
 extern struct platform_device spitzscoop2_device;
+extern struct platform_device spitzssp_device;
 extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 15c2f1a8623..9427d808839 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -116,20 +116,33 @@ struct battery_thresh  spitz_battery_levels_noac[] = {
 	{   0,   0},
 };
 
+/* MAX1111 Commands */
+#define MAXCTRL_PD0      1u << 0
+#define MAXCTRL_PD1      1u << 1
+#define MAXCTRL_SGL      1u << 2
+#define MAXCTRL_UNI      1u << 3
+#define MAXCTRL_SEL_SH   4
+#define MAXCTRL_STR      1u << 7
+
 /*
  * Read MAX1111 ADC
  */
-extern int max1111_read_channel(int);
-
 int sharpsl_pm_pxa_read_max1111(int channel)
 {
 	if (machine_is_tosa()) // Ugly, better move this function into another module
 	    return 0;
 
+#ifdef CONFIG_SENSORS_MAX1111
+	extern int max1111_read_channel(int);
+
 	/* max1111 accepts channels from 0-3, however,
 	 * it is encoded from 0-7 here in the code.
 	 */
 	return max1111_read_channel(channel >> 1);
+#else
+	return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1
+			| MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR);
+#endif
 }
 
 void sharpsl_pm_pxa_init(void)