[PATCH] ppc32: Remove board support for K2

Support for the K2 board is no longer maintained and thus being removed

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

7 files changed, 1 insertions, 1390 deletions

diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 2f3598662f2..3f8e003ff88 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -637,9 +637,6 @@ config SANDPOINT
 config RADSTONE_PPC7D
 	bool "Radstone Technology PPC7D board"
 
-config K2
-	bool "SBS-K2"
-
 config PAL4
 	bool "SBS-Palomar4"
 
@@ -794,7 +791,7 @@ config PPC_OF
 config PPC_GEN550
 	bool
 	depends on SANDPOINT || MCPN765 || SPRUCE || PPLUS || PCORE || \
-		PRPMC750 || K2 || PRPMC800 || LOPEC || \
+		PRPMC750 || PRPMC800 || LOPEC || \
 		(EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
 		83xx
 	default y
@@ -883,10 +880,6 @@ config SANDPOINT_ENABLE_UART1
 	  If this option is enabled then the MPC824x processor will run
 	  in DUART mode instead of UART mode.
 
-config CPC710_DATA_GATHERING
-	bool "Enable CPC710 data gathering"
-	depends on K2
-
 config HARRIER_STORE_GATHERING
 	bool "Enable Harrier store gathering"
 	depends on HARRIER
diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile
index d4dc4fa7964..20717193fff 100644
--- a/arch/ppc/boot/simple/Makefile
+++ b/arch/ppc/boot/simple/Makefile
@@ -96,10 +96,6 @@ zimageinitrd-$(CONFIG_OCOTEA)		:= zImage.initrd-TREE
 zimageinitrd-$(CONFIG_GEMINI)		:= zImage.initrd-STRIPELF
          end-$(CONFIG_GEMINI)		:= gemini
 
-     extra.o-$(CONFIG_K2)		:= prepmap.o
-         end-$(CONFIG_K2)		:= k2
-   cacheflag-$(CONFIG_K2)		:= -include $(clear_L2_L3)
-
      extra.o-$(CONFIG_KATANA)		:= misc-katana.o
          end-$(CONFIG_KATANA)		:= katana
    cacheflag-$(CONFIG_KATANA)		:= -include $(clear_L2_L3)
diff --git a/arch/ppc/configs/k2_defconfig b/arch/ppc/configs/k2_defconfig
deleted file mode 100644
index f10f5a6d2da..00000000000
--- a/arch/ppc/configs/k2_defconfig
+++ /dev/null
@@ -1,680 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_ALTIVEC is not set
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-CONFIG_K2=y
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-CONFIG_PPC_GEN550=y
-# CONFIG_CPC710_DATA_GATHERING is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_IDEDISK_STROKE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IDE_TASKFILE_IO is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
-CONFIG_BLK_DEV_ADMA=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-CONFIG_BLK_DEV_ALI15X3=y
-# CONFIG_WDC_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_FTP=m
-# CONFIG_IP_NF_IRC is not set
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_AMANDA is not set
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-# CONFIG_IP_NF_MATCH_RECENT is not set
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-# CONFIG_IP_NF_MATCH_LENGTH is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_FTP=m
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-# CONFIG_IP_NF_ARP_MANGLE is not set
-CONFIG_IP_NF_COMPAT_IPCHAINS=m
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-# CONFIG_IP_NF_RAW is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_EEPRO100_PIO is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile
index fcd03e52f60..fb52acf5daa 100644
--- a/arch/ppc/platforms/Makefile
+++ b/arch/ppc/platforms/Makefile
@@ -27,7 +27,6 @@ obj-$(CONFIG_CPCI690)		+= cpci690.o
 obj-$(CONFIG_EV64260)		+= ev64260.o
 obj-$(CONFIG_CHESTNUT)		+= chestnut.o
 obj-$(CONFIG_GEMINI)		+= gemini_pci.o gemini_setup.o gemini_prom.o
-obj-$(CONFIG_K2)		+= k2.o
 obj-$(CONFIG_LOPEC)		+= lopec.o
 obj-$(CONFIG_KATANA)		+= katana.o
 obj-$(CONFIG_HDPU)		+= hdpu.o
diff --git a/arch/ppc/platforms/k2.c b/arch/ppc/platforms/k2.c
deleted file mode 100644
index aacb438708f..00000000000
--- a/arch/ppc/platforms/k2.c
+++ /dev/null
@@ -1,613 +0,0 @@
-/*
- * arch/ppc/platforms/k2.c
- *
- * Board setup routines for SBS K2
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * Updated by: Randy Vinson <rvinson@mvista.com.
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/config.h>
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/ide.h>
-#include <linux/irq.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/time.h>
-#include <asm/i8259.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-
-#include <syslib/cpc710.h>
-#include "k2.h"
-
-extern unsigned long loops_per_jiffy;
-extern void gen550_progress(char *, unsigned short);
-
-static unsigned int cpu_7xx[16] = {
-	0, 15, 14, 0, 0, 13, 5, 9, 6, 11, 8, 10, 16, 12, 7, 0
-};
-static unsigned int cpu_6xx[16] = {
-	0, 0, 14, 0, 0, 13, 5, 9, 6, 11, 8, 10, 0, 12, 7, 0
-};
-
-static inline int __init
-k2_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
-	/*
-	 * Check our hose index.  If we are zero then we are on the
-	 * local PCI hose, otherwise we are on the cPCI hose.
-	 */
-	if (!hose->index) {
-		static char pci_irq_table[][4] =
-			/*
-			 * 	PCI IDSEL/INTPIN->INTLINE
-			 * 	A	B	C	D
-			 */
-		{
-			{1, 	0,	0,	0},	/* Ethernet */
-			{5,	5,	5,	5},	/* PMC Site 1 */
-			{6,	6,	6,	6},	/* PMC Site 2 */
-			{0,     0,      0,      0},     /* unused */
-			{0,     0,      0,      0},     /* unused */
-			{0,     0,      0,      0},     /* PCI-ISA Bridge */
-			{0,     0,      0,      0},     /* unused */
-			{0,     0,      0,      0},     /* unused */
-			{0,     0,      0,      0},     /* unused */
-			{0,     0,      0,      0},     /* unused */
-			{0,     0,      0,      0},     /* unused */
-			{0,     0,      0,      0},     /* unused */
-			{0,     0,      0,      0},     /* unused */
-			{0,     0,      0,      0},     /* unused */
-			{15,	0,	0,	0},	/* M5229 IDE */
-		};
-		const long min_idsel = 3, max_idsel = 17, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	} else {
-		static char pci_irq_table[][4] =
-		/*
-		 * 	PCI IDSEL/INTPIN->INTLINE
-		 * 	A	B	C	D
-		 */
-		{
-			{10, 	11,	12,	9},	/* cPCI slot 8 */
-			{11, 	12,	9,	10},	/* cPCI slot 7 */
-			{12, 	9,	10,	11},	/* cPCI slot 6 */
-			{9, 	10,	11,	12},	/* cPCI slot 5 */
-			{10, 	11,	12,	9},	/* cPCI slot 4 */
-			{11, 	12,	9,	10},	/* cPCI slot 3 */
-			{12, 	9,	10,	11},	/* cPCI slot 2 */
-		};
-		const long min_idsel = 15, max_idsel = 21, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	}
-}
-
-void k2_pcibios_fixup(void)
-{
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-	struct pci_dev *ide_dev;
-
-	/*
-	 * Enable DMA support on hdc
-	 */
-	ide_dev = pci_get_device(PCI_VENDOR_ID_AL,
-				  PCI_DEVICE_ID_AL_M5229, NULL);
-
-	if (ide_dev) {
-
-		unsigned long ide_dma_base;
-
-		ide_dma_base = pci_resource_start(ide_dev, 4);
-		outb(0x00, ide_dma_base + 0x2);
-		outb(0x20, ide_dma_base + 0xa);
-		pci_dev_put(ide_dev);
-	}
-#endif
-}
-
-void k2_pcibios_fixup_resources(struct pci_dev *dev)
-{
-	int i;
-
-	if ((dev->vendor == PCI_VENDOR_ID_IBM) &&
-	    (dev->device == PCI_DEVICE_ID_IBM_CPC710_PCI64)) {
-		pr_debug("Fixup CPC710 resources\n");
-		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-			dev->resource[i].start = 0;
-			dev->resource[i].end = 0;
-		}
-	}
-}
-
-void k2_setup_hoses(void)
-{
-	struct pci_controller *hose_a, *hose_b;
-
-	/*
-	 * Reconfigure CPC710 memory map so
-	 * we have some more PCI memory space.
-	 */
-
-	/* Set FPHB mode */
-	__raw_writel(0x808000e0, PGCHP);	/* Set FPHB mode */
-
-	/* PCI32 mappings */
-	__raw_writel(0x00000000, K2_PCI32_BAR + PIBAR);	/* PCI I/O base */
-	__raw_writel(0x00000000, K2_PCI32_BAR + PMBAR);	/* PCI Mem base */
-	__raw_writel(0xf0000000, K2_PCI32_BAR + MSIZE);	/* 256MB */
-	__raw_writel(0xfff00000, K2_PCI32_BAR + IOSIZE); /* 1MB */
-	__raw_writel(0xc0000000, K2_PCI32_BAR + SMBAR);	/* Base@0xc0000000 */
-	__raw_writel(0x80000000, K2_PCI32_BAR + SIBAR);	/* Base@0x80000000 */
-	__raw_writel(0x000000c0, K2_PCI32_BAR + PSSIZE); /* 1GB space */
-	__raw_writel(0x000000c0, K2_PCI32_BAR + PPSIZE); /* 1GB space */
-	__raw_writel(0x00000000, K2_PCI32_BAR + BARPS);	/* Base@0x00000000 */
-	__raw_writel(0x00000000, K2_PCI32_BAR + BARPP);	/* Base@0x00000000 */
-	__raw_writel(0x00000080, K2_PCI32_BAR + PSBAR);	/* Base@0x80 */
-	__raw_writel(0x00000000, K2_PCI32_BAR + PPBAR);
-
-	__raw_writel(0xc0000000, K2_PCI32_BAR + BPMDLK);
-	__raw_writel(0xd0000000, K2_PCI32_BAR + TPMDLK);
-	__raw_writel(0x80000000, K2_PCI32_BAR + BIODLK);
-	__raw_writel(0x80100000, K2_PCI32_BAR + TIODLK);
-	__raw_writel(0xe0008000, K2_PCI32_BAR + DLKCTRL);
-	__raw_writel(0xffffffff, K2_PCI32_BAR + DLKDEV);
-
-	/* PCI64 mappings */
-	__raw_writel(0x00100000, K2_PCI64_BAR + PIBAR);	/* PCI I/O base */
-	__raw_writel(0x10000000, K2_PCI64_BAR + PMBAR);	/* PCI Mem base */
-	__raw_writel(0xf0000000, K2_PCI64_BAR + MSIZE);	/* 256MB */
-	__raw_writel(0xfff00000, K2_PCI64_BAR + IOSIZE); /* 1MB */
-	__raw_writel(0xd0000000, K2_PCI64_BAR + SMBAR);	/* Base@0xd0000000 */
-	__raw_writel(0x80100000, K2_PCI64_BAR + SIBAR);	/* Base@0x80100000 */
-	__raw_writel(0x000000c0, K2_PCI64_BAR + PSSIZE); /* 1GB space */
-	__raw_writel(0x000000c0, K2_PCI64_BAR + PPSIZE); /* 1GB space */
-	__raw_writel(0x00000000, K2_PCI64_BAR + BARPS);	/* Base@0x00000000 */
-	__raw_writel(0x00000000, K2_PCI64_BAR + BARPP);	/* Base@0x00000000 */
-
-	/* Setup PCI32 hose */
-	hose_a = pcibios_alloc_controller();
-	if (!hose_a)
-		return;
-
-	hose_a->first_busno = 0;
-	hose_a->last_busno = 0xff;
-	hose_a->pci_mem_offset = K2_PCI32_MEM_BASE;
-
-	pci_init_resource(&hose_a->io_resource,
-			  K2_PCI32_LOWER_IO,
-			  K2_PCI32_UPPER_IO,
-			  IORESOURCE_IO, "PCI32 host bridge");
-
-	pci_init_resource(&hose_a->mem_resources[0],
-			  K2_PCI32_LOWER_MEM + K2_PCI32_MEM_BASE,
-			  K2_PCI32_UPPER_MEM + K2_PCI32_MEM_BASE,
-			  IORESOURCE_MEM, "PCI32 host bridge");
-
-	hose_a->io_space.start = K2_PCI32_LOWER_IO;
-	hose_a->io_space.end = K2_PCI32_UPPER_IO;
-	hose_a->mem_space.start = K2_PCI32_LOWER_MEM;
-	hose_a->mem_space.end = K2_PCI32_UPPER_MEM;
-	hose_a->io_base_virt = (void *)K2_ISA_IO_BASE;
-
-	setup_indirect_pci(hose_a, K2_PCI32_CONFIG_ADDR, K2_PCI32_CONFIG_DATA);
-
-	/* Initialize PCI32 bus registers */
-	early_write_config_byte(hose_a,
-				hose_a->first_busno,
-				PCI_DEVFN(0, 0),
-				CPC710_BUS_NUMBER, hose_a->first_busno);
-
-	early_write_config_byte(hose_a,
-				hose_a->first_busno,
-				PCI_DEVFN(0, 0),
-				CPC710_SUB_BUS_NUMBER, hose_a->last_busno);
-
-	/* Enable PCI interrupt polling */
-	early_write_config_byte(hose_a,
-				hose_a->first_busno,
-				PCI_DEVFN(8, 0), 0x45, 0x80);
-
-	/* Route polled PCI interrupts */
-	early_write_config_byte(hose_a,
-				hose_a->first_busno,
-				PCI_DEVFN(8, 0), 0x48, 0x58);
-
-	early_write_config_byte(hose_a,
-				hose_a->first_busno,
-				PCI_DEVFN(8, 0), 0x49, 0x07);
-
-	early_write_config_byte(hose_a,
-				hose_a->first_busno,
-				PCI_DEVFN(8, 0), 0x4a, 0x31);
-
-	early_write_config_byte(hose_a,
-				hose_a->first_busno,
-				PCI_DEVFN(8, 0), 0x4b, 0xb9);
-
-	/* route secondary IDE channel interrupt to IRQ 15 */
-	early_write_config_byte(hose_a,
-				hose_a->first_busno,
-				PCI_DEVFN(8, 0), 0x75, 0x0f);
-
-	/* enable IDE controller IDSEL */
-	early_write_config_byte(hose_a,
-				hose_a->first_busno,
-				PCI_DEVFN(8, 0), 0x58, 0x48);
-
-	/* Enable IDE function */
-	early_write_config_byte(hose_a,
-				hose_a->first_busno,
-				PCI_DEVFN(17, 0), 0x50, 0x03);
-
-	/* Set M5229 IDE controller to native mode */
-	early_write_config_byte(hose_a,
-				hose_a->first_busno,
-				PCI_DEVFN(17, 0), PCI_CLASS_PROG, 0xdf);
-
-	hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno);
-
-	/* Write out correct max subordinate bus number for hose A */
-	early_write_config_byte(hose_a,
-				hose_a->first_busno,
-				PCI_DEVFN(0, 0),
-				CPC710_SUB_BUS_NUMBER, hose_a->last_busno);
-
-	/* Only setup PCI64 hose if we are in the system slot */
-	if (!(readb(K2_MISC_REG) & K2_SYS_SLOT_MASK)) {
-		/* Setup PCI64 hose */
-		hose_b = pcibios_alloc_controller();
-		if (!hose_b)
-			return;
-
-		hose_b->first_busno = hose_a->last_busno + 1;
-		hose_b->last_busno = 0xff;
-
-		/* Reminder: quit changing the following, it is correct. */
-		hose_b->pci_mem_offset = K2_PCI32_MEM_BASE;
-
-		pci_init_resource(&hose_b->io_resource,
-				  K2_PCI64_LOWER_IO,
-				  K2_PCI64_UPPER_IO,
-				  IORESOURCE_IO, "PCI64 host bridge");
-
-		pci_init_resource(&hose_b->mem_resources[0],
-				  K2_PCI64_LOWER_MEM + K2_PCI32_MEM_BASE,
-				  K2_PCI64_UPPER_MEM + K2_PCI32_MEM_BASE,
-				  IORESOURCE_MEM, "PCI64 host bridge");
-
-		hose_b->io_space.start = K2_PCI64_LOWER_IO;
-		hose_b->io_space.end = K2_PCI64_UPPER_IO;
-		hose_b->mem_space.start = K2_PCI64_LOWER_MEM;
-		hose_b->mem_space.end = K2_PCI64_UPPER_MEM;
-		hose_b->io_base_virt = (void *)K2_ISA_IO_BASE;
-
-		setup_indirect_pci(hose_b,
-				   K2_PCI64_CONFIG_ADDR, K2_PCI64_CONFIG_DATA);
-
-		/* Initialize PCI64 bus registers */
-		early_write_config_byte(hose_b,
-					0,
-					PCI_DEVFN(0, 0),
-					CPC710_SUB_BUS_NUMBER, 0xff);
-
-		early_write_config_byte(hose_b,
-					0,
-					PCI_DEVFN(0, 0),
-					CPC710_BUS_NUMBER, hose_b->first_busno);
-
-		hose_b->last_busno = pciauto_bus_scan(hose_b,
-						      hose_b->first_busno);
-
-		/* Write out correct max subordinate bus number for hose B */
-		early_write_config_byte(hose_b,
-					hose_b->first_busno,
-					PCI_DEVFN(0, 0),
-					CPC710_SUB_BUS_NUMBER,
-					hose_b->last_busno);
-
-		/* Configure PCI64 PSBAR */
-		early_write_config_dword(hose_b,
-					 hose_b->first_busno,
-					 PCI_DEVFN(0, 0),
-					 PCI_BASE_ADDRESS_0,
-					 K2_PCI64_SYS_MEM_BASE);
-	}
-
-	/* Configure i8259 level/edge settings */
-	outb(0x62, 0x4d0);
-	outb(0xde, 0x4d1);
-
-#ifdef CONFIG_CPC710_DATA_GATHERING
-	{
-		unsigned int tmp;
-		tmp = __raw_readl(ABCNTL);
-		/* Enable data gathering on both PCI interfaces */
-		__raw_writel(tmp | 0x05000000, ABCNTL);
-	}
-#endif
-
-	ppc_md.pcibios_fixup = k2_pcibios_fixup;
-	ppc_md.pcibios_fixup_resources = k2_pcibios_fixup_resources;
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = k2_map_irq;
-}
-
-static int k2_get_bus_speed(void)
-{
-	int bus_speed;
-	unsigned char board_id;
-
-	board_id = *(unsigned char *)K2_BOARD_ID_REG;
-
-	switch (K2_BUS_SPD(board_id)) {
-
-	case 0:
-	default:
-		bus_speed = 100000000;
-		break;
-
-	case 1:
-		bus_speed = 83333333;
-		break;
-
-	case 2:
-		bus_speed = 75000000;
-		break;
-
-	case 3:
-		bus_speed = 66666666;
-		break;
-	}
-	return bus_speed;
-}
-
-static int k2_get_cpu_speed(void)
-{
-	unsigned long hid1;
-	int cpu_speed;
-
-	hid1 = mfspr(SPRN_HID1) >> 28;
-
-	if ((mfspr(SPRN_PVR) >> 16) == 8)
-		hid1 = cpu_7xx[hid1];
-	else
-		hid1 = cpu_6xx[hid1];
-
-	cpu_speed = k2_get_bus_speed() * hid1 / 2;
-	return cpu_speed;
-}
-
-static void __init k2_calibrate_decr(void)
-{
-	int freq, divisor = 4;
-
-	/* determine processor bus speed */
-	freq = k2_get_bus_speed();
-	tb_ticks_per_jiffy = freq / HZ / divisor;
-	tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000);
-}
-
-static int k2_show_cpuinfo(struct seq_file *m)
-{
-	unsigned char k2_geo_bits, k2_system_slot;
-
-	seq_printf(m, "vendor\t\t: SBS\n");
-	seq_printf(m, "machine\t\t: K2\n");
-	seq_printf(m, "cpu speed\t: %dMhz\n", k2_get_cpu_speed() / 1000000);
-	seq_printf(m, "bus speed\t: %dMhz\n", k2_get_bus_speed() / 1000000);
-	seq_printf(m, "memory type\t: SDRAM\n");
-
-	k2_geo_bits = readb(K2_MSIZ_GEO_REG) & K2_GEO_ADR_MASK;
-	k2_system_slot = !(readb(K2_MISC_REG) & K2_SYS_SLOT_MASK);
-	seq_printf(m, "backplane\t: %s slot board",
-		   k2_system_slot ? "System" : "Non system");
-	seq_printf(m, "with geographical address %x\n", k2_geo_bits);
-
-	return 0;
-}
-
-TODC_ALLOC();
-
-static void __init k2_setup_arch(void)
-{
-	unsigned int cpu;
-
-	/* Setup TODC access */
-	TODC_INIT(TODC_TYPE_MK48T37, 0, 0,
-		  ioremap(K2_RTC_BASE_ADDRESS, K2_RTC_SIZE), 8);
-
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000 / HZ;
-
-	/* make FLASH transactions higher priority than PCI to avoid deadlock */
-	__raw_writel(__raw_readl(SIOC1) | 0x80000000, SIOC1);
-
-	/* Set hardware to access FLASH page 2 */
-	__raw_writel(1 << 29, GPOUT);
-
-	/* Setup PCI host bridges */
-	k2_setup_hoses();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDC1;
-#endif
-
-	/* Identify the system */
-	printk(KERN_INFO "System Identification: SBS K2 - PowerPC 750 @ "
-			"%d Mhz\n", k2_get_cpu_speed() / 1000000);
-	printk(KERN_INFO "Port by MontaVista Software, Inc. "
-			"(source@mvista.com)\n");
-
-	/* Identify the CPU manufacturer */
-	cpu = PVR_REV(mfspr(SPRN_PVR));
-	printk(KERN_INFO "CPU manufacturer: %s [rev=%04x]\n",
-			(cpu & (1 << 15)) ? "IBM" : "Motorola", cpu);
-}
-
-static void k2_restart(char *cmd)
-{
-	local_irq_disable();
-
-	/* Flip FLASH back to page 1 to access firmware image */
-	__raw_writel(0, GPOUT);
-
-	/* SRR0 has system reset vector, SRR1 has default MSR value */
-	/* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */
-	mtspr(SPRN_SRR0, 0xfff00100);
-	mtspr(SPRN_SRR1, 0);
-	__asm__ __volatile__("rfi\n\t");
-
-	/* not reached */
-	for (;;) ;
-}
-
-static void k2_power_off(void)
-{
-	for (;;) ;
-}
-
-static void k2_halt(void)
-{
-	k2_restart(NULL);
-}
-
-/*
- * Set BAT 3 to map PCI32 I/O space.
- */
-static __inline__ void k2_set_bat(void)
-{
-	/* wait for all outstanding memory accesses to complete */
-	mb();
-
-	/* setup DBATs */
-	mtspr(SPRN_DBAT2U, 0x80001ffe);
-	mtspr(SPRN_DBAT2L, 0x8000002a);
-	mtspr(SPRN_DBAT3U, 0xf0001ffe);
-	mtspr(SPRN_DBAT3L, 0xf000002a);
-
-	/* wait for updates */
-	mb();
-}
-
-static unsigned long __init k2_find_end_of_memory(void)
-{
-	unsigned long total;
-	unsigned char msize = 7;	/* Default to 128MB */
-
-	msize = K2_MEM_SIZE(readb(K2_MSIZ_GEO_REG));
-
-	switch (msize) {
-	case 2:
-		/*
-		 * This will break without a lowered
-		 * KERNELBASE or CONFIG_HIGHMEM on.
-		 * It seems non 1GB builds exist yet,
-		 * though.
-		 */
-		total = K2_MEM_SIZE_1GB;
-		break;
-	case 3:
-	case 4:
-		total = K2_MEM_SIZE_512MB;
-		break;
-	case 5:
-	case 6:
-		total = K2_MEM_SIZE_256MB;
-		break;
-	case 7:
-		total = K2_MEM_SIZE_128MB;
-		break;
-	default:
-		printk
-		    ("K2: Invalid memory size detected, defaulting to 128MB\n");
-		total = K2_MEM_SIZE_128MB;
-		break;
-	}
-	return total;
-}
-
-static void __init k2_map_io(void)
-{
-	io_block_mapping(K2_PCI32_IO_BASE,
-			 K2_PCI32_IO_BASE, 0x00200000, _PAGE_IO);
-	io_block_mapping(0xff000000, 0xff000000, 0x01000000, _PAGE_IO);
-}
-
-static void __init k2_init_irq(void)
-{
-	int i;
-
-	for (i = 0; i < 16; i++)
-		irq_desc[i].handler = &i8259_pic;
-
-	i8259_init(0);
-}
-
-void __init platform_init(unsigned long r3, unsigned long r4,
-			  unsigned long r5, unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo((struct bi_record *)(r3 + KERNELBASE));
-
-	k2_set_bat();
-
-	isa_io_base = K2_ISA_IO_BASE;
-	isa_mem_base = K2_ISA_MEM_BASE;
-	pci_dram_offset = K2_PCI32_SYS_MEM_BASE;
-
-	ppc_md.setup_arch = k2_setup_arch;
-	ppc_md.show_cpuinfo = k2_show_cpuinfo;
-	ppc_md.init_IRQ = k2_init_irq;
-	ppc_md.get_irq = i8259_irq;
-
-	ppc_md.find_end_of_memory = k2_find_end_of_memory;
-	ppc_md.setup_io_mappings = k2_map_io;
-
-	ppc_md.restart = k2_restart;
-	ppc_md.power_off = k2_power_off;
-	ppc_md.halt = k2_halt;
-
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.calibrate_decr = k2_calibrate_decr;
-
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#endif
-}
diff --git a/arch/ppc/platforms/k2.h b/arch/ppc/platforms/k2.h
deleted file mode 100644
index 78326aba198..00000000000
--- a/arch/ppc/platforms/k2.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * arch/ppc/platforms/k2.h
- *
- * Definitions for SBS K2 board support
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __PPC_PLATFORMS_K2_H
-#define __PPC_PLATFORMS_K2_H
-
-/*
- * SBS K2 definitions
- */
-
-#define	K2_PCI64_BAR		0xff400000
-#define	K2_PCI32_BAR		0xff500000
-
-#define K2_PCI64_CONFIG_ADDR	(K2_PCI64_BAR + 0x000f8000)
-#define K2_PCI64_CONFIG_DATA	(K2_PCI64_BAR + 0x000f8010)
-
-#define K2_PCI32_CONFIG_ADDR	(K2_PCI32_BAR + 0x000f8000)
-#define K2_PCI32_CONFIG_DATA	(K2_PCI32_BAR + 0x000f8010)
-
-#define K2_PCI64_MEM_BASE	0xd0000000
-#define K2_PCI64_IO_BASE	0x80100000
-
-#define K2_PCI32_MEM_BASE	0xc0000000
-#define K2_PCI32_IO_BASE	0x80000000
-
-#define K2_PCI32_SYS_MEM_BASE	0x80000000
-#define K2_PCI64_SYS_MEM_BASE	K2_PCI32_SYS_MEM_BASE
-
-#define K2_PCI32_LOWER_MEM	0x00000000
-#define K2_PCI32_UPPER_MEM	0x0fffffff
-#define K2_PCI32_LOWER_IO	0x00000000
-#define K2_PCI32_UPPER_IO	0x000fffff
-
-#define K2_PCI64_LOWER_MEM	0x10000000
-#define K2_PCI64_UPPER_MEM	0x1fffffff
-#define K2_PCI64_LOWER_IO	0x00100000
-#define	K2_PCI64_UPPER_IO	0x001fffff
-
-#define K2_ISA_IO_BASE		K2_PCI32_IO_BASE
-#define K2_ISA_MEM_BASE		K2_PCI32_MEM_BASE
-
-#define K2_BOARD_ID_REG		(K2_ISA_IO_BASE + 0x800)
-#define K2_MISC_REG		(K2_ISA_IO_BASE + 0x804)
-#define K2_MSIZ_GEO_REG		(K2_ISA_IO_BASE + 0x808)
-#define K2_HOT_SWAP_REG		(K2_ISA_IO_BASE + 0x80c)
-#define K2_PLD2_REG		(K2_ISA_IO_BASE + 0x80e)
-#define K2_PLD3_REG		(K2_ISA_IO_BASE + 0x80f)
-
-#define K2_BUS_SPD(board_id)	(board_id >> 2) & 3
-
-#define K2_RTC_BASE_OFFSET	0x90000
-#define K2_RTC_BASE_ADDRESS	(K2_PCI32_MEM_BASE + K2_RTC_BASE_OFFSET)
-#define K2_RTC_SIZE		0x8000
-
-#define K2_MEM_SIZE_MASK	0xe0
-#define K2_MEM_SIZE(size_reg)	(size_reg & K2_MEM_SIZE_MASK) >> 5
-#define	K2_MEM_SIZE_1GB		0x40000000
-#define K2_MEM_SIZE_512MB	0x20000000
-#define K2_MEM_SIZE_256MB	0x10000000
-#define K2_MEM_SIZE_128MB	0x08000000
-
-#define K2_L2CACHE_MASK		0x03	/* Mask for 2 L2 Cache bits */
-#define K2_L2CACHE_512KB	0x00	/* 512KB */
-#define K2_L2CACHE_256KB	0x01	/* 256KB */
-#define K2_L2CACHE_1MB		0x02	/* 1MB */
-#define K2_L2CACHE_NONE		0x03	/* None */
-
-#define K2_GEO_ADR_MASK		0x1f
-
-#define K2_SYS_SLOT_MASK	0x08
-
-#endif /* __PPC_PLATFORMS_K2_H */
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index 0d6f1948fb2..54e5666939b 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -50,8 +50,6 @@ obj-$(CONFIG_EV64260)		+= todc_time.o pci_auto.o
 obj-$(CONFIG_CHESTNUT)		+= mv64360_pic.o pci_auto.o
 obj-$(CONFIG_GEMINI)		+= open_pic.o indirect_pci.o
 obj-$(CONFIG_GT64260)		+= gt64260_pic.o
-obj-$(CONFIG_K2)		+= i8259.o indirect_pci.o todc_time.o \
-					pci_auto.o
 obj-$(CONFIG_LOPEC)		+= i8259.o pci_auto.o todc_time.o
 obj-$(CONFIG_HDPU)		+= pci_auto.o
 obj-$(CONFIG_LUAN)		+= indirect_pci.o pci_auto.o todc_time.o