From 415e2f367ee47d49c419a6913863307fb44c7bf7 Mon Sep 17 00:00:00 2001 From: Sandra McCann Date: Fri, 10 Apr 2015 09:26:20 -0400 Subject: added ulinks to networking and virt deploy guides -NOT release-independent links --- en-US/Guest_Installation_Virt_Manager.xml | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/en-US/Guest_Installation_Virt_Manager.xml b/en-US/Guest_Installation_Virt_Manager.xml index 0600e3b..176c56c 100644 --- a/en-US/Guest_Installation_Virt_Manager.xml +++ b/en-US/Guest_Installation_Virt_Manager.xml @@ -96,7 +96,7 @@ Group: Virtualization
Network Support - By default libvirt creates a private network for your guests on the host machine. This private network will use a 192.168.x.x subnet and not be reachable directly from the network the host machine is on, but virtual guests can use the host machine as a gateway and can connect out with it. If you need to provide services on your guests that are reachable through other machines on your host network you can use iptables DNAT rules to forward in specific ports, or you can setup a Bridged env. + By default libvirt creates a private network for your guests on the host machine. This private network will use a 192.168.x.x subnet and not be reachable directly from the network the host machine is on, but virtual guests can use the host machine as a gateway and can connect out with it. If you need to provide services on your guests that are reachable through other machines on your host network you can use firewalld to forward in specific ports, or you can setup a Bridged env. See the Networking Guide for more details.
@@ -214,10 +214,10 @@ Group: Virtualization This method uses a Preboot eXecution Environment (PXE) server to install the guest virtual machine. Setting up a PXE server is covered in the - Deployment Guide. To install via network boot, + Virtualization Deployment and Administration Guide. To install via network boot, the guest must have a routable IP address or shared network device. For information on the required networking configuration for PXE - installation, refer to the Deployment Guide. + installation, refer to the Virtualization Deployment and Administration Guide. -- cgit