diff options
Diffstat (limited to 'arm-beagle.patch')
| -rw-r--r-- | arm-beagle.patch | 460 |
1 files changed, 0 insertions, 460 deletions
diff --git a/arm-beagle.patch b/arm-beagle.patch deleted file mode 100644 index 5e2d8abd..00000000 --- a/arm-beagle.patch +++ /dev/null @@ -1,460 +0,0 @@ -Bugzilla: 1012025 -Upstream-status: In beagle github repository https://github.com/beagleboard/kernel - -From b5a2528c89fc8049b2a6a750634c14983e33d00f Mon Sep 17 00:00:00 2001 -From: Robert Nelson <robertcnelson@gmail.com> -Date: Fri, 27 Dec 2013 13:05:09 -0600 -Subject: [PATCH] arm: dts: am335x-boneblack: lcdc add panel-info - -Signed-off-by: Robert Nelson <robertcnelson@gmail.com> ---- - arch/arm/boot/dts/am335x-boneblack.dts | 13 +++++++++++++ - 1 file changed, 13 insertions(+) - -diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts -index 6b71ad9..09ffbd8 100644 ---- a/arch/arm/boot/dts/am335x-boneblack.dts -+++ b/arch/arm/boot/dts/am335x-boneblack.dts -@@ -74,5 +74,18 @@ - pinctrl-0 = <&nxp_hdmi_bonelt_pins>; - pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; - status = "okay"; -+ -+ panel-info { -+ bpp = <16>; -+ ac-bias = <255>; -+ ac-bias-intrpt = <0>; -+ dma-burst-sz = <16>; -+ fdd = <16>; -+ sync-edge = <1>; -+ sync-ctrl = <1>; -+ raster-order = <0>; -+ fifo-th = <0>; -+ invert-pxl-clk; -+ }; - }; - }; --- -1.8.5.1 - -From 1da083a002581520dd358b8b8e097078000d12b9 Mon Sep 17 00:00:00 2001 -From: Robert Nelson <robertcnelson@gmail.com> -Date: Fri, 27 Dec 2013 13:14:19 -0600 -Subject: [PATCH 2/2] arm: dts: am335x-boneblack: add cpu0 opp points - -Signed-off-by: Robert Nelson <robertcnelson@gmail.com> ---- - arch/arm/boot/dts/am335x-boneblack.dts | 18 ++++++++++++++++++ - 1 file changed, 18 insertions(+) - -diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts -index 09ffbd8..f213ccd 100644 ---- a/arch/arm/boot/dts/am335x-boneblack.dts -+++ b/arch/arm/boot/dts/am335x-boneblack.dts -@@ -67,6 +67,24 @@ - }; - - / { -+ cpus { -+ cpu@0 { -+ cpu0-supply = <&dcdc2_reg>; -+ /* -+ * To consider voltage drop between PMIC and SoC, -+ * tolerance value is reduced to 2% from 4% and -+ * voltage value is increased as a precaution. -+ */ -+ operating-points = < -+ /* kHz uV */ -+ 1000000 1325000 -+ 800000 1300000 -+ 600000 1112000 -+ 300000 969000 -+ >; -+ }; -+ }; -+ - hdmi { - compatible = "ti,tilcdc,slave"; - i2c = <&i2c0>; --- -1.8.5.1 - -From 8551d8aa7d3e002da2097e7e902fb96fceb8694e Mon Sep 17 00:00:00 2001 -From: Robert Nelson <robertcnelson@gmail.com> -Date: Tue, 31 Dec 2013 11:17:45 -0600 -Subject: [PATCH 3/3] arm: dts: am335x-bone-common: enable and use i2c2 - -Signed-off-by: Robert Nelson <robertcnelson@gmail.com> ---- - arch/arm/boot/dts/am335x-bone-common.dtsi | 39 +++++++++++++++++++++++++++++++ - 1 file changed, 39 insertions(+) - -diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi -index e3f27ec..54366b6 100644 ---- a/arch/arm/boot/dts/am335x-bone-common.dtsi -+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi -@@ -84,6 +84,13 @@ - >; - }; - -+ i2c2_pins: pinmux_i2c2_pins { -+ pinctrl-single,pins = < -+ 0x178 0x73 /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) uart1_ctsn.i2c2_sda */ -+ 0x17c 0x73 /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) uart1_rtsn.i2c2_scl */ -+ >; -+ }; -+ - uart0_pins: pinmux_uart0_pins { - pinctrl-single,pins = < - 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ -@@ -220,6 +227,38 @@ - reg = <0x24>; - }; - -+ baseboard_eeprom: baseboard_eeprom@50 { -+ compatible = "at,24c256"; -+ reg = <0x50>; -+ }; -+}; -+ -+&i2c2 { -+ status = "okay"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c2_pins>; -+ -+ clock-frequency = <100000>; -+ -+ cape_eeprom0: cape_eeprom0@54 { -+ compatible = "at,24c256"; -+ reg = <0x54>; -+ }; -+ -+ cape_eeprom1: cape_eeprom1@55 { -+ compatible = "at,24c256"; -+ reg = <0x55>; -+ }; -+ -+ cape_eeprom2: cape_eeprom2@56 { -+ compatible = "at,24c256"; -+ reg = <0x56>; -+ }; -+ -+ cape_eeprom3: cape_eeprom3@57 { -+ compatible = "at,24c256"; -+ reg = <0x57>; -+ }; - }; - - /include/ "tps65217.dtsi" --- -1.8.5.2 - -From a3099dc53a47d1694a5b575580ec3406dc429bf8 Mon Sep 17 00:00:00 2001 -From: Robert Nelson <robertcnelson@gmail.com> -Date: Tue, 31 Dec 2013 14:18:00 -0600 -Subject: [PATCH 4/4] arm: dts: am335x-bone-common: setup default pinmux - http://elinux.org/Basic_Proto_Cape - -Signed-off-by: Robert Nelson <robertcnelson@gmail.com> ---- - arch/arm/boot/dts/am335x-bone-common.dtsi | 130 ++++++++++++++++++++++++++++++ - 1 file changed, 130 insertions(+) - -diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi -index e4571af..f85cabc 100644 ---- a/arch/arm/boot/dts/am335x-bone-common.dtsi -+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi -@@ -98,6 +98,13 @@ - >; - }; - -+ uart1_pins: pinmux_uart1_pins { -+ pinctrl-single,pins = < -+ 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ -+ 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ -+ >; -+ }; -+ - clkout2_pin: pinmux_clkout2_pin { - pinctrl-single,pins = < - 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ -@@ -178,6 +185,33 @@ - 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ - >; - }; -+ -+ spi0_pins: pinmux_spi0_pins { -+ pinctrl-single,pins = < -+ 0x150 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */ -+ 0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */ -+ 0x158 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */ -+ 0x15c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ -+ >; -+ }; -+ -+ ehrpwm1_pin_p9_14: pinmux_ehrpwm1_pin_p9_14 { -+ pinctrl-single,pins = < -+ 0x048 0x6 /* P9_14 (ZCZ ball U14) | MODE 6 */ -+ >; -+ }; -+ -+ ehrpwm1_pin_p9_16: pinmux_ehrpwm1_pin_p9_16 { -+ pinctrl-single,pins = < -+ 0x04c 0x6 /* P9_16 (ZCZ ball T14) | MODE 6 */ -+ >; -+ }; -+ -+ ecap0_pin_p9_42: pinmux_ecap0_pin_p9_42 { -+ pinctrl-single,pins = < -+ 0x164 0x0 /* P9_42 (ZCZ ball C18) | MODE 0 */ -+ >; -+ }; - }; - - &uart0 { -@@ -187,6 +221,13 @@ - status = "okay"; - }; - -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart1_pins>; -+ -+ status = "okay"; -+}; -+ - &usb { - status = "okay"; - -@@ -261,6 +302,56 @@ - }; - }; - -+&epwmss0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&ecap0_pin_p9_42>; -+ status = "okay"; -+ -+ ecap@48300100 { -+ status = "okay"; -+ }; -+}; -+ -+&epwmss1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = < -+ &ehrpwm1_pin_p9_14 -+ &ehrpwm1_pin_p9_16 -+ >; -+ -+ status = "okay"; -+ -+ ehrpwm@48302200 { -+ status = "okay"; -+ }; -+}; -+ -+&spi0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins>; -+ status = "okay"; -+ -+ spidev0: spi@0 { -+ compatible = "spidev"; -+ reg = <0>; -+ spi-max-frequency = <16000000>; -+ spi-cpha; -+ }; -+ -+ spidev1: spi@1 { -+ compatible = "spidev"; -+ reg = <1>; -+ spi-max-frequency = <16000000>; -+ }; -+}; -+ -+&tscadc { -+ status = "okay"; -+ adc { -+ ti,adc-channels = <4 5 6>; -+ }; -+}; -+ - /include/ "tps65217.dtsi" - - &tps { -@@ -336,3 +427,42 @@ - cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; - cd-inverted; - }; -+ -+/ { -+ ocp { -+ //FIXME: these pwm's still need work, this guild isn't working.. -+ //http://elinux.org/EBC_Exercise_13_Pulse_Width_Modulation -+ pwm_test_P9_14@0 { -+ compatible = "pwm_test"; -+ pwms = <&ehrpwm1 0 500000 1>; -+ pwm-names = "PWM_P9_14"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&ehrpwm1_pin_p9_14>; -+ enabled = <1>; -+ duty = <0>; -+ status = "okay"; -+ }; -+ -+ pwm_test_P9_16@0 { -+ compatible = "pwm_test"; -+ pwms = <&ehrpwm1 0 500000 1>; -+ pwm-names = "PWM_P9_16"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&ehrpwm1_pin_p9_16>; -+ enabled = <1>; -+ duty = <0>; -+ status = "okay"; -+ }; -+ -+ pwm_test_P9_42 { -+ compatible = "pwm_test"; -+ pwms = <&ecap0 0 500000 1>; -+ pwm-names = "PWM_P9_42"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&ecap0_pin_p9_42>; -+ enabled = <1>; -+ duty = <0>; -+ status = "okay"; -+ }; -+ }; -+}; --- -1.8.5.2 - -From b6e2c817edfc6d73874cf833daffe1be6c7ed8bb Mon Sep 17 00:00:00 2001 -From: Robert Nelson <robertcnelson@gmail.com> -Date: Thu, 13 Mar 2014 14:18:52 -0500 -Subject: [PATCH] arm: dts: am335x-bone-common: add - uart2_pins/uart4_pins/uart5_pins - -Signed-off-by: Robert Nelson <robertcnelson@gmail.com> ---- - arch/arm/boot/dts/am335x-bone-common.dtsi | 21 +++++++++++++++++++++ - 1 file changed, 21 insertions(+) - -diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi -index f85cabc..5270d18 100644 ---- a/arch/arm/boot/dts/am335x-bone-common.dtsi -+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi -@@ -105,6 +105,27 @@ - >; - }; - -+ uart2_pins: pinmux_uart2_pins { -+ pinctrl-single,pins = < -+ 0x150 0x21 /* spi0_sclk.uart2_rxd | MODE1 */ -+ 0x154 0x01 /* spi0_d0.uart2_txd | MODE1 */ -+ >; -+ }; -+ -+ uart4_pins: pinmux_uart4_pins { -+ pinctrl-single,pins = < -+ 0x070 0x26 /* gpmc_wait0.uart4_rxd | MODE6 */ -+ 0x074 0x06 /* gpmc_wpn.uart4_txd | MODE6 */ -+ >; -+ }; -+ -+ uart5_pins: pinmux_uart5_pins { -+ pinctrl-single,pins = < -+ 0x0C4 0x24 /* lcd_data9.uart5_rxd | MODE4 */ -+ 0x0C0 0x04 /* lcd_data8.uart5_txd | MODE4 */ -+ >; -+ }; -+ - clkout2_pin: pinmux_clkout2_pin { - pinctrl-single,pins = < - 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ --- -1.9.0 - -From 72567452d5d6007010597158f6afd00e2bf07579 Mon Sep 17 00:00:00 2001 -From: Pantelis Antoniou <panto@antoniou-consulting.com> -Date: Sat, 15 Sep 2012 12:00:41 +0300 -Subject: [PATCH] pinctrl: pinctrl-single must be initialized early. - -When using pinctrl-single to handle i2c initialization, it has -to be done early. Whether this is the best way to do so, is an -exercise left to the reader. ---- - drivers/pinctrl/pinctrl-single.c | 12 +++++++++++- - 1 file changed, 11 insertions(+), 1 deletion(-) - -diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c -index 829b98c..5107dcf 100644 ---- a/drivers/pinctrl/pinctrl-single.c -+++ b/drivers/pinctrl/pinctrl-single.c -@@ -2039,7 +2039,17 @@ static struct platform_driver pcs_driver = { - #endif - }; - --module_platform_driver(pcs_driver); -+static int __init pcs_init(void) -+{ -+ return platform_driver_register(&pcs_driver); -+} -+postcore_initcall(pcs_init); -+ -+static void __exit pcs_exit(void) -+{ -+ platform_driver_unregister(&pcs_driver); -+} -+module_exit(pcs_exit); - - MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>"); - MODULE_DESCRIPTION("One-register-per-pin type device tree based pinctrl driver"); --- -1.8.5.2 - -From b6e2c817edfc6d73874cf833daffe1be6c7ed8bb Mon Sep 17 00:00:00 2001 -From: Robert Nelson <robertcnelson@gmail.com> -Date: Thu, 13 Mar 2014 14:18:52 -0500 -Subject: [PATCH] arm: dts: am335x-bone-common: add - uart2_pins/uart4_pins/uart5_pins - -Signed-off-by: Robert Nelson <robertcnelson@gmail.com> ---- - arch/arm/boot/dts/am335x-bone-common.dtsi | 21 +++++++++++++++++++++ - 1 file changed, 21 insertions(+) - -diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi -index f85cabc..5270d18 100644 ---- a/arch/arm/boot/dts/am335x-bone-common.dtsi -+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi -@@ -105,6 +105,27 @@ - >; - }; - -+ uart2_pins: pinmux_uart2_pins { -+ pinctrl-single,pins = < -+ 0x150 0x21 /* spi0_sclk.uart2_rxd | MODE1 */ -+ 0x154 0x01 /* spi0_d0.uart2_txd | MODE1 */ -+ >; -+ }; -+ -+ uart4_pins: pinmux_uart4_pins { -+ pinctrl-single,pins = < -+ 0x070 0x26 /* gpmc_wait0.uart4_rxd | MODE6 */ -+ 0x074 0x06 /* gpmc_wpn.uart4_txd | MODE6 */ -+ >; -+ }; -+ -+ uart5_pins: pinmux_uart5_pins { -+ pinctrl-single,pins = < -+ 0x0C4 0x24 /* lcd_data9.uart5_rxd | MODE4 */ -+ 0x0C0 0x04 /* lcd_data8.uart5_txd | MODE4 */ -+ >; -+ }; -+ - clkout2_pin: pinmux_clkout2_pin { - pinctrl-single,pins = < - 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ --- -1.9.0 |