diff options
| -rw-r--r-- | 0001-Input-wacom-make-sure-touch_max-is-set-for-touch-dev.patch | 56 | ||||
| -rw-r--r-- | 0001-usb-phy-Quiet-unable-to-find-transceiver-message.patch | 34 | ||||
| -rw-r--r-- | 0002-Input-wacom-add-support-for-three-new-Intuos-devices.patch | 216 | ||||
| -rw-r--r-- | 0003-Input-wacom-add-reporting-of-SW_MUTE_DEVICE-events.patch | 155 | ||||
| -rw-r--r-- | Input-ALPS-add-support-for-Dolphin-devices.patch | 348 | ||||
| -rw-r--r-- | config-generic | 4 | ||||
| -rw-r--r-- | config-x86-generic | 1 | ||||
| -rw-r--r-- | elantech-Properly-differentiate-between-clickpads-an.patch | 110 | ||||
| -rw-r--r-- | kernel.spec | 34 | ||||
| -rw-r--r-- | sources | 2 |
10 files changed, 51 insertions, 909 deletions
diff --git a/0001-Input-wacom-make-sure-touch_max-is-set-for-touch-dev.patch b/0001-Input-wacom-make-sure-touch_max-is-set-for-touch-dev.patch deleted file mode 100644 index f86cc1ff..00000000 --- a/0001-Input-wacom-make-sure-touch_max-is-set-for-touch-dev.patch +++ /dev/null @@ -1,56 +0,0 @@ -Bugzilla: 1046238 -Upstream-status: Queued for 3.14 - -From 1d0d6df02750b4a6f466768cbfbf860e24f4c8d4 Mon Sep 17 00:00:00 2001 -From: Ping Cheng <pinglinux@gmail.com> -Date: Mon, 25 Nov 2013 18:43:45 -0800 -Subject: [PATCH] Input: wacom - make sure touch_max is set for touch devices - -Old single touch Tablet PCs do not have touch_max set at -wacom_features. Since touch device at lease supports one -finger, assign touch_max to 1 when touch usage is defined -in its HID Descriptor and touch_max is not pre-defined. - -Tested-by: Jason Gerecke <killertofu@gmail.com> -Signed-off-by: Ping Cheng <pingc@wacom.com> -Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> -Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> ---- - drivers/input/tablet/wacom_sys.c | 7 +++++-- - 1 file changed, 5 insertions(+), 2 deletions(-) - -diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c -index 8a90da1..3d71b60 100644 ---- a/drivers/input/tablet/wacom_sys.c -+++ b/drivers/input/tablet/wacom_sys.c -@@ -304,7 +304,7 @@ static int wacom_parse_hid(struct usb_interface *intf, - struct usb_device *dev = interface_to_usbdev(intf); - char limit = 0; - /* result has to be defined as int for some devices */ -- int result = 0; -+ int result = 0, touch_max = 0; - int i = 0, usage = WCM_UNDEFINED, finger = 0, pen = 0; - unsigned char *report; - -@@ -351,7 +351,8 @@ static int wacom_parse_hid(struct usb_interface *intf, - if (usage == WCM_DESKTOP) { - if (finger) { - features->device_type = BTN_TOOL_FINGER; -- -+ /* touch device at least supports one touch point */ -+ touch_max = 1; - switch (features->type) { - case TABLETPC2FG: - features->pktlen = WACOM_PKGLEN_TPC2FG; -@@ -504,6 +505,8 @@ static int wacom_parse_hid(struct usb_interface *intf, - } - - out: -+ if (!features->touch_max && touch_max) -+ features->touch_max = touch_max; - result = 0; - kfree(report); - return result; --- -1.8.4.2 - diff --git a/0001-usb-phy-Quiet-unable-to-find-transceiver-message.patch b/0001-usb-phy-Quiet-unable-to-find-transceiver-message.patch new file mode 100644 index 00000000..431ad19f --- /dev/null +++ b/0001-usb-phy-Quiet-unable-to-find-transceiver-message.patch @@ -0,0 +1,34 @@ +From 80f13c7cb8c2b83b6b38a953ad69b91cab9dc614 Mon Sep 17 00:00:00 2001 +From: Josh Boyer <jwboyer@fedoraproject.org> +Date: Sat, 25 Jan 2014 10:00:41 -0500 +Subject: [PATCH] usb: phy: Quiet unable to find transceiver message + +commit 1ae5799ef6317 ("usb: hcd: Initialize USB phy if needed") allows +the USB layer to initialize external PHYs if needed. However, a PHY is +not needed in all cases. The usb_get_phy_device function will print +an error message, "unable to find transceiver" but everything still +functions normally. + +Drop the severity of this message to pr_debug. + +Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> +--- + drivers/usb/phy/phy.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c +index e6f61e4..c7fe880 100644 +--- a/drivers/usb/phy/phy.c ++++ b/drivers/usb/phy/phy.c +@@ -228,7 +228,7 @@ struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index) + + phy = __usb_find_phy_dev(dev, &phy_bind_list, index); + if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) { +- pr_err("unable to find transceiver\n"); ++ pr_debug("unable to find transceiver\n"); + goto err0; + } + +-- +1.8.5.3 + diff --git a/0002-Input-wacom-add-support-for-three-new-Intuos-devices.patch b/0002-Input-wacom-add-support-for-three-new-Intuos-devices.patch deleted file mode 100644 index 0c2161f1..00000000 --- a/0002-Input-wacom-add-support-for-three-new-Intuos-devices.patch +++ /dev/null @@ -1,216 +0,0 @@ -Bugzilla: 1046238 -Upstream-status: Queued for 3.14 - -From b5fd2a3e92ca5c8c1f3c20d31ac5daed3ec4d604 Mon Sep 17 00:00:00 2001 -From: Ping Cheng <pinglinux@gmail.com> -Date: Mon, 25 Nov 2013 18:44:55 -0800 -Subject: [PATCH] Input: wacom - add support for three new Intuos devices - -Two tablets in this series support both pen and touch. One (Intuos S) -only supports pen. This patch also updates the driver to process wireless -devices that do not support touch interface. - -Tested-by: Jason Gerecke <killertofu@gmail.com> -Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> -Signed-off-by: Ping Cheng <pingc@wacom.com> -Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> ---- - drivers/input/tablet/wacom_sys.c | 6 ++-- - drivers/input/tablet/wacom_wac.c | 61 ++++++++++++++++++++++++++++++---------- - drivers/input/tablet/wacom_wac.h | 2 ++ - 3 files changed, 51 insertions(+), 18 deletions(-) - -diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c -index 3d71b60..3a7d99c 100644 ---- a/drivers/input/tablet/wacom_sys.c -+++ b/drivers/input/tablet/wacom_sys.c -@@ -1198,7 +1198,8 @@ static void wacom_wireless_work(struct work_struct *work) - goto fail; - - /* Touch interface */ -- if (wacom_wac1->features.touch_max) { -+ if (wacom_wac1->features.touch_max || -+ wacom_wac1->features.type == INTUOSHT) { - wacom_wac2->features = - *((struct wacom_features *)id->driver_info); - wacom_wac2->features.pktlen = WACOM_PKGLEN_BBTOUCH3; -@@ -1321,7 +1322,7 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i - * HID descriptor. If this is the touch interface (wMaxPacketSize - * of WACOM_PKGLEN_BBTOUCH3), override the table values. - */ -- if (features->type >= INTUOS5S && features->type <= INTUOSPL) { -+ if (features->type >= INTUOS5S && features->type <= INTUOSHT) { - if (endpoint->wMaxPacketSize == WACOM_PKGLEN_BBTOUCH3) { - features->device_type = BTN_TOOL_FINGER; - features->pktlen = WACOM_PKGLEN_BBTOUCH3; -@@ -1391,7 +1392,6 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i - goto fail5; - } - } -- - return 0; - - fail5: wacom_destroy_leds(wacom); -diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c -index 3f75f1d..eb60a28 100644 ---- a/drivers/input/tablet/wacom_wac.c -+++ b/drivers/input/tablet/wacom_wac.c -@@ -1176,10 +1176,16 @@ static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data) - static void wacom_bpt3_button_msg(struct wacom_wac *wacom, unsigned char *data) - { - struct input_dev *input = wacom->input; -+ struct wacom_features *features = &wacom->features; - -- input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0); -+ if (features->type == INTUOSHT) { -+ input_report_key(input, BTN_LEFT, (data[1] & 0x02) != 0); -+ input_report_key(input, BTN_BACK, (data[1] & 0x08) != 0); -+ } else { -+ input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0); -+ input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0); -+ } - input_report_key(input, BTN_FORWARD, (data[1] & 0x04) != 0); -- input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0); - input_report_key(input, BTN_RIGHT, (data[1] & 0x01) != 0); - } - -@@ -1217,7 +1223,7 @@ static int wacom_bpt_pen(struct wacom_wac *wacom) - unsigned char *data = wacom->data; - int prox = 0, x = 0, y = 0, p = 0, d = 0, pen = 0, btn1 = 0, btn2 = 0; - -- if (data[0] != 0x02) -+ if (data[0] != WACOM_REPORT_PENABLED) - return 0; - - prox = (data[1] & 0x20) == 0x20; -@@ -1297,7 +1303,7 @@ static int wacom_wireless_irq(struct wacom_wac *wacom, size_t len) - unsigned char *data = wacom->data; - int connected; - -- if (len != WACOM_PKGLEN_WIRELESS || data[0] != 0x80) -+ if (len != WACOM_PKGLEN_WIRELESS || data[0] != WACOM_REPORT_WL) - return 0; - - connected = data[1] & 0x01; -@@ -1391,6 +1397,7 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len) - break; - - case BAMBOO_PT: -+ case INTUOSHT: - sync = wacom_bpt_irq(wacom_wac, len); - break; - -@@ -1459,7 +1466,7 @@ void wacom_setup_device_quirks(struct wacom_features *features) - - /* these device have multiple inputs */ - if (features->type >= WIRELESS || -- (features->type >= INTUOS5S && features->type <= INTUOSPL) || -+ (features->type >= INTUOS5S && features->type <= INTUOSHT) || - (features->oVid && features->oPid)) - features->quirks |= WACOM_QUIRK_MULTI_INPUT; - -@@ -1771,33 +1778,43 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, - __set_bit(INPUT_PROP_POINTER, input_dev->propbit); - break; - -+ case INTUOSHT: - case BAMBOO_PT: - __clear_bit(ABS_MISC, input_dev->absbit); - -- __set_bit(INPUT_PROP_POINTER, input_dev->propbit); -- - if (features->device_type == BTN_TOOL_FINGER) { -- unsigned int flags = INPUT_MT_POINTER; - - __set_bit(BTN_LEFT, input_dev->keybit); - __set_bit(BTN_FORWARD, input_dev->keybit); - __set_bit(BTN_BACK, input_dev->keybit); - __set_bit(BTN_RIGHT, input_dev->keybit); - -- if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) { -- input_set_abs_params(input_dev, -+ if (features->touch_max) { -+ /* touch interface */ -+ unsigned int flags = INPUT_MT_POINTER; -+ -+ __set_bit(INPUT_PROP_POINTER, input_dev->propbit); -+ if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) { -+ input_set_abs_params(input_dev, - ABS_MT_TOUCH_MAJOR, - 0, features->x_max, 0, 0); -- input_set_abs_params(input_dev, -+ input_set_abs_params(input_dev, - ABS_MT_TOUCH_MINOR, - 0, features->y_max, 0, 0); -+ } else { -+ __set_bit(BTN_TOOL_FINGER, input_dev->keybit); -+ __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit); -+ flags = 0; -+ } -+ input_mt_init_slots(input_dev, features->touch_max, flags); - } else { -- __set_bit(BTN_TOOL_FINGER, input_dev->keybit); -- __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit); -- flags = 0; -+ /* buttons/keys only interface */ -+ __clear_bit(ABS_X, input_dev->absbit); -+ __clear_bit(ABS_Y, input_dev->absbit); -+ __clear_bit(BTN_TOUCH, input_dev->keybit); - } -- input_mt_init_slots(input_dev, features->touch_max, flags); - } else if (features->device_type == BTN_TOOL_PEN) { -+ __set_bit(INPUT_PROP_POINTER, input_dev->propbit); - __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); - __set_bit(BTN_TOOL_PEN, input_dev->keybit); - __set_bit(BTN_STYLUS, input_dev->keybit); -@@ -2194,6 +2211,17 @@ static const struct wacom_features wacom_features_0x300 = - static const struct wacom_features wacom_features_0x301 = - { "Wacom Bamboo One M", WACOM_PKGLEN_BBPEN, 21648, 13530, 1023, - 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -+static const struct wacom_features wacom_features_0x302 = -+ { "Wacom Intuos PT S", WACOM_PKGLEN_BBPEN, 15200, 9500, 1023, -+ 31, INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, -+ .touch_max = 16 }; -+static const struct wacom_features wacom_features_0x303 = -+ { "Wacom Intuos PT M", WACOM_PKGLEN_BBPEN, 21600, 13500, 1023, -+ 31, INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, -+ .touch_max = 16 }; -+static const struct wacom_features wacom_features_0x30E = -+ { "Wacom Intuos S", WACOM_PKGLEN_BBPEN, 15200, 9500, 1023, -+ 31, INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; - static const struct wacom_features wacom_features_0x6004 = - { "ISD-V4", WACOM_PKGLEN_GRAPHIRE, 12800, 8000, 255, - 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -@@ -2329,6 +2357,9 @@ const struct usb_device_id wacom_ids[] = { - { USB_DEVICE_WACOM(0x10D) }, - { USB_DEVICE_WACOM(0x300) }, - { USB_DEVICE_WACOM(0x301) }, -+ { USB_DEVICE_DETAILED(0x302, USB_CLASS_HID, 0, 0) }, -+ { USB_DEVICE_DETAILED(0x303, USB_CLASS_HID, 0, 0) }, -+ { USB_DEVICE_DETAILED(0x30E, USB_CLASS_HID, 0, 0) }, - { USB_DEVICE_WACOM(0x304) }, - { USB_DEVICE_DETAILED(0x314, USB_CLASS_HID, 0, 0) }, - { USB_DEVICE_DETAILED(0x315, USB_CLASS_HID, 0, 0) }, -diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h -index fd23a37..854cceb 100644 ---- a/drivers/input/tablet/wacom_wac.h -+++ b/drivers/input/tablet/wacom_wac.h -@@ -54,6 +54,7 @@ - #define WACOM_REPORT_TPCST 16 - #define WACOM_REPORT_TPC1FGE 18 - #define WACOM_REPORT_24HDT 1 -+#define WACOM_REPORT_WL 128 - - /* device quirks */ - #define WACOM_QUIRK_MULTI_INPUT 0x0001 -@@ -81,6 +82,7 @@ enum { - INTUOSPS, - INTUOSPM, - INTUOSPL, -+ INTUOSHT, - WACOM_21UX2, - WACOM_22HD, - DTK, --- -1.8.4.2 - diff --git a/0003-Input-wacom-add-reporting-of-SW_MUTE_DEVICE-events.patch b/0003-Input-wacom-add-reporting-of-SW_MUTE_DEVICE-events.patch deleted file mode 100644 index ad433639..00000000 --- a/0003-Input-wacom-add-reporting-of-SW_MUTE_DEVICE-events.patch +++ /dev/null @@ -1,155 +0,0 @@ -Bugzilla: 1046238 -Upstream-status: Queued for 3.14 - -From 961794a00eab03f4344b7d5e825e8e789e55da87 Mon Sep 17 00:00:00 2001 -From: Ping Cheng <pinglinux@gmail.com> -Date: Thu, 5 Dec 2013 12:54:53 -0800 -Subject: [PATCH] Input: wacom - add reporting of SW_MUTE_DEVICE events - -New Intuos series models added a hardware switch to turn touch -data on/off. The state of the switch is reported periodically -from the tablet. To report the state the driver will emit SW_MUTE_DEVICE -events. - -Reviewed_by: Chris Bagwell <chris@cnpbagwell.com> -Acked-by: Peter Hutterer <peter.hutterer@who-t.net> -Tested-by: Jason Gerecke <killertofu@gmail.com> -Signed-off-by: Ping Cheng <pingc@wacom.com> -Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> ---- - drivers/input/tablet/wacom_sys.c | 12 ++++++++++++ - drivers/input/tablet/wacom_wac.c | 30 +++++++++++++++++++++++++++--- - drivers/input/tablet/wacom_wac.h | 5 +++++ - 3 files changed, 44 insertions(+), 3 deletions(-) - -diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c -index 8318826..b16ebef 100644 ---- a/drivers/input/tablet/wacom_sys.c -+++ b/drivers/input/tablet/wacom_sys.c -@@ -1197,6 +1197,8 @@ static void wacom_wireless_work(struct work_struct *work) - wacom_wac1->features.device_type = BTN_TOOL_PEN; - snprintf(wacom_wac1->name, WACOM_NAME_MAX, "%s (WL) Pen", - wacom_wac1->features.name); -+ wacom_wac1->shared->touch_max = wacom_wac1->features.touch_max; -+ wacom_wac1->shared->type = wacom_wac1->features.type; - error = wacom_register_input(wacom1); - if (error) - goto fail; -@@ -1218,6 +1220,10 @@ static void wacom_wireless_work(struct work_struct *work) - error = wacom_register_input(wacom2); - if (error) - goto fail; -+ -+ if (wacom_wac1->features.type == INTUOSHT && -+ wacom_wac1->features.touch_max) -+ wacom_wac->shared->touch_input = wacom_wac2->input; - } - - error = wacom_initialize_battery(wacom); -@@ -1396,6 +1402,12 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i - goto fail5; - } - } -+ -+ if (wacom_wac->features.type == INTUOSHT && wacom_wac->features.touch_max) { -+ if (wacom_wac->features.device_type == BTN_TOOL_FINGER) -+ wacom_wac->shared->touch_input = wacom_wac->input; -+ } -+ - return 0; - - fail5: wacom_destroy_leds(wacom); -diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c -index 7655088..048e5b3 100644 ---- a/drivers/input/tablet/wacom_wac.c -+++ b/drivers/input/tablet/wacom_wac.c -@@ -1219,13 +1219,23 @@ static int wacom_bpt3_touch(struct wacom_wac *wacom) - - static int wacom_bpt_pen(struct wacom_wac *wacom) - { -+ struct wacom_features *features = &wacom->features; - struct input_dev *input = wacom->input; - unsigned char *data = wacom->data; - int prox = 0, x = 0, y = 0, p = 0, d = 0, pen = 0, btn1 = 0, btn2 = 0; - -- if (data[0] != WACOM_REPORT_PENABLED) -+ if (data[0] != WACOM_REPORT_PENABLED && data[0] != WACOM_REPORT_USB) - return 0; - -+ if (data[0] == WACOM_REPORT_USB) { -+ if (features->type == INTUOSHT && features->touch_max) { -+ input_report_switch(wacom->shared->touch_input, -+ SW_MUTE_DEVICE, data[8] & 0x40); -+ input_sync(wacom->shared->touch_input); -+ } -+ return 0; -+ } -+ - prox = (data[1] & 0x20) == 0x20; - - /* -@@ -1258,8 +1268,8 @@ static int wacom_bpt_pen(struct wacom_wac *wacom) - * touching and applying pressure; do not report negative - * distance. - */ -- if (data[8] <= wacom->features.distance_max) -- d = wacom->features.distance_max - data[8]; -+ if (data[8] <= features->distance_max) -+ d = features->distance_max - data[8]; - - pen = data[1] & 0x01; - btn1 = data[1] & 0x02; -@@ -1310,6 +1320,13 @@ static int wacom_wireless_irq(struct wacom_wac *wacom, size_t len) - if (connected) { - int pid, battery; - -+ if ((wacom->shared->type == INTUOSHT) && -+ wacom->shared->touch_max) { -+ input_report_switch(wacom->shared->touch_input, -+ SW_MUTE_DEVICE, data[5] & 0x40); -+ input_sync(wacom->shared->touch_input); -+ } -+ - pid = get_unaligned_be16(&data[6]); - battery = data[5] & 0x3f; - if (wacom->pid != pid) { -@@ -1779,6 +1796,13 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, - break; - - case INTUOSHT: -+ if (features->touch_max && -+ features->device_type == BTN_TOOL_FINGER) { -+ input_dev->evbit[0] |= BIT_MASK(EV_SW); -+ __set_bit(SW_MUTE_DEVICE, input_dev->swbit); -+ } -+ /* fall through */ -+ - case BAMBOO_PT: - __clear_bit(ABS_MISC, input_dev->absbit); - -diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h -index 854cceb..3600cf7 100644 ---- a/drivers/input/tablet/wacom_wac.h -+++ b/drivers/input/tablet/wacom_wac.h -@@ -55,6 +55,7 @@ - #define WACOM_REPORT_TPC1FGE 18 - #define WACOM_REPORT_24HDT 1 - #define WACOM_REPORT_WL 128 -+#define WACOM_REPORT_USB 192 - - /* device quirks */ - #define WACOM_QUIRK_MULTI_INPUT 0x0001 -@@ -131,6 +132,10 @@ struct wacom_features { - struct wacom_shared { - bool stylus_in_proximity; - bool touch_down; -+ /* for wireless device to access USB interfaces */ -+ unsigned touch_max; -+ int type; -+ struct input_dev *touch_input; - }; - - struct wacom_wac { --- -1.8.4.2 - diff --git a/Input-ALPS-add-support-for-Dolphin-devices.patch b/Input-ALPS-add-support-for-Dolphin-devices.patch deleted file mode 100644 index 1bdc0cbf..00000000 --- a/Input-ALPS-add-support-for-Dolphin-devices.patch +++ /dev/null @@ -1,348 +0,0 @@ -Bugzilla: 953211 -Upstream-status: Queued for 3.14 - -From 4081924b7b6ce876fdb8e8049f1a5ba9c1496483 Mon Sep 17 00:00:00 2001 -From: Yunkang Tang <tommywill2011@gmail.com> -Date: Thu, 26 Dec 2013 14:54:19 -0800 -Subject: [PATCH] Input: ALPS - add support for "Dolphin" devices - -This adds support for another flavor of ALPS protocol used in newer -"Dolphin" devices. - -Signed-off-by: Yunkang Tang <yunkang.tang@cn.alps.com> -Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> ---- - drivers/input/mouse/alps.c | 214 ++++++++++++++++++++++++++++++++++++--------- - drivers/input/mouse/alps.h | 7 +- - 2 files changed, 179 insertions(+), 42 deletions(-) - -diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c -index 5cf62e3..fb15c64 100644 ---- a/drivers/input/mouse/alps.c -+++ b/drivers/input/mouse/alps.c -@@ -277,6 +277,57 @@ static void alps_process_packet_v1_v2(struct psmouse *psmouse) - } - - /* -+ * Process bitmap data for V5 protocols. Return value is null. -+ * -+ * The bitmaps don't have enough data to track fingers, so this function -+ * only generates points representing a bounding box of at most two contacts. -+ * These two points are returned in x1, y1, x2, and y2. -+ */ -+static void alps_process_bitmap_dolphin(struct alps_data *priv, -+ struct alps_fields *fields, -+ int *x1, int *y1, int *x2, int *y2) -+{ -+ int box_middle_x, box_middle_y; -+ unsigned int x_map, y_map; -+ unsigned char start_bit, end_bit; -+ unsigned char x_msb, x_lsb, y_msb, y_lsb; -+ -+ x_map = fields->x_map; -+ y_map = fields->y_map; -+ -+ if (!x_map || !y_map) -+ return; -+ -+ /* Get Most-significant and Least-significant bit */ -+ x_msb = fls(x_map); -+ x_lsb = ffs(x_map); -+ y_msb = fls(y_map); -+ y_lsb = ffs(y_map); -+ -+ /* Most-significant bit should never exceed max sensor line number */ -+ if (x_msb > priv->x_bits || y_msb > priv->y_bits) -+ return; -+ -+ *x1 = *y1 = *x2 = *y2 = 0; -+ -+ if (fields->fingers > 1) { -+ start_bit = priv->x_bits - x_msb; -+ end_bit = priv->x_bits - x_lsb; -+ box_middle_x = (priv->x_max * (start_bit + end_bit)) / -+ (2 * (priv->x_bits - 1)); -+ -+ start_bit = y_lsb - 1; -+ end_bit = y_msb - 1; -+ box_middle_y = (priv->y_max * (start_bit + end_bit)) / -+ (2 * (priv->y_bits - 1)); -+ *x1 = fields->x; -+ *y1 = fields->y; -+ *x2 = 2 * box_middle_x - *x1; -+ *y2 = 2 * box_middle_y - *y1; -+ } -+} -+ -+/* - * Process bitmap data from v3 and v4 protocols. Returns the number of - * fingers detected. A return value of 0 means at least one of the - * bitmaps was empty. -@@ -481,7 +532,8 @@ static void alps_decode_buttons_v3(struct alps_fields *f, unsigned char *p) - f->ts_middle = !!(p[3] & 0x40); - } - --static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p) -+static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p, -+ struct psmouse *psmouse) - { - f->first_mp = !!(p[4] & 0x40); - f->is_mp = !!(p[0] & 0x40); -@@ -502,48 +554,61 @@ static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p) - alps_decode_buttons_v3(f, p); - } - --static void alps_decode_rushmore(struct alps_fields *f, unsigned char *p) -+static void alps_decode_rushmore(struct alps_fields *f, unsigned char *p, -+ struct psmouse *psmouse) - { -- alps_decode_pinnacle(f, p); -+ alps_decode_pinnacle(f, p, psmouse); - - f->x_map |= (p[5] & 0x10) << 11; - f->y_map |= (p[5] & 0x20) << 6; - } - --static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p) -+static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p, -+ struct psmouse *psmouse) - { -+ u64 palm_data = 0; -+ struct alps_data *priv = psmouse->private; -+ - f->first_mp = !!(p[0] & 0x02); - f->is_mp = !!(p[0] & 0x20); - -- f->fingers = ((p[0] & 0x6) >> 1 | -+ if (!f->is_mp) { -+ f->x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7)); -+ f->y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3)); -+ f->z = (p[0] & 4) ? 0 : p[5] & 0x7f; -+ alps_decode_buttons_v3(f, p); -+ } else { -+ f->fingers = ((p[0] & 0x6) >> 1 | - (p[0] & 0x10) >> 2); -- f->x_map = ((p[2] & 0x60) >> 5) | -- ((p[4] & 0x7f) << 2) | -- ((p[5] & 0x7f) << 9) | -- ((p[3] & 0x07) << 16) | -- ((p[3] & 0x70) << 15) | -- ((p[0] & 0x01) << 22); -- f->y_map = (p[1] & 0x7f) | -- ((p[2] & 0x1f) << 7); -- -- f->x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7)); -- f->y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3)); -- f->z = (p[0] & 4) ? 0 : p[5] & 0x7f; - -- alps_decode_buttons_v3(f, p); -+ palm_data = (p[1] & 0x7f) | -+ ((p[2] & 0x7f) << 7) | -+ ((p[4] & 0x7f) << 14) | -+ ((p[5] & 0x7f) << 21) | -+ ((p[3] & 0x07) << 28) | -+ (((u64)p[3] & 0x70) << 27) | -+ (((u64)p[0] & 0x01) << 34); -+ -+ /* Y-profile is stored in P(0) to p(n-1), n = y_bits; */ -+ f->y_map = palm_data & (BIT(priv->y_bits) - 1); -+ -+ /* X-profile is stored in p(n) to p(n+m-1), m = x_bits; */ -+ f->x_map = (palm_data >> priv->y_bits) & -+ (BIT(priv->x_bits) - 1); -+ } - } - --static void alps_process_touchpad_packet_v3(struct psmouse *psmouse) -+static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse) - { - struct alps_data *priv = psmouse->private; - unsigned char *packet = psmouse->packet; - struct input_dev *dev = psmouse->dev; - struct input_dev *dev2 = priv->dev2; - int x1 = 0, y1 = 0, x2 = 0, y2 = 0; -- int fingers = 0, bmap_fingers; -- struct alps_fields f; -+ int fingers = 0, bmap_fn; -+ struct alps_fields f = {0}; - -- priv->decode_fields(&f, packet); -+ priv->decode_fields(&f, packet, psmouse); - - /* - * There's no single feature of touchpad position and bitmap packets -@@ -560,19 +625,38 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse) - */ - if (f.is_mp) { - fingers = f.fingers; -- bmap_fingers = alps_process_bitmap(priv, -- f.x_map, f.y_map, -- &x1, &y1, &x2, &y2); -- -- /* -- * We shouldn't report more than one finger if -- * we don't have two coordinates. -- */ -- if (fingers > 1 && bmap_fingers < 2) -- fingers = bmap_fingers; -- -- /* Now process position packet */ -- priv->decode_fields(&f, priv->multi_data); -+ if (priv->proto_version == ALPS_PROTO_V3) { -+ bmap_fn = alps_process_bitmap(priv, f.x_map, -+ f.y_map, &x1, &y1, -+ &x2, &y2); -+ -+ /* -+ * We shouldn't report more than one finger if -+ * we don't have two coordinates. -+ */ -+ if (fingers > 1 && bmap_fn < 2) -+ fingers = bmap_fn; -+ -+ /* Now process position packet */ -+ priv->decode_fields(&f, priv->multi_data, -+ psmouse); -+ } else { -+ /* -+ * Because Dolphin uses position packet's -+ * coordinate data as Pt1 and uses it to -+ * calculate Pt2, so we need to do position -+ * packet decode first. -+ */ -+ priv->decode_fields(&f, priv->multi_data, -+ psmouse); -+ -+ /* -+ * Since Dolphin's finger number is reliable, -+ * there is no need to compare with bmap_fn. -+ */ -+ alps_process_bitmap_dolphin(priv, &f, &x1, &y1, -+ &x2, &y2); -+ } - } else { - priv->multi_packet = 0; - } -@@ -662,7 +746,7 @@ static void alps_process_packet_v3(struct psmouse *psmouse) - return; - } - -- alps_process_touchpad_packet_v3(psmouse); -+ alps_process_touchpad_packet_v3_v5(psmouse); - } - - static void alps_process_packet_v6(struct psmouse *psmouse) -@@ -1709,6 +1793,52 @@ error: - return -1; - } - -+static int alps_dolphin_get_device_area(struct psmouse *psmouse, -+ struct alps_data *priv) -+{ -+ struct ps2dev *ps2dev = &psmouse->ps2dev; -+ unsigned char param[4] = {0}; -+ int num_x_electrode, num_y_electrode; -+ -+ if (alps_enter_command_mode(psmouse)) -+ return -1; -+ -+ param[0] = 0x0a; -+ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) || -+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL) || -+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL) || -+ ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) || -+ ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE)) -+ return -1; -+ -+ if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) -+ return -1; -+ -+ /* -+ * Dolphin's sensor line number is not fixed. It can be calculated -+ * by adding the device's register value with DOLPHIN_PROFILE_X/YOFFSET. -+ * Further more, we can get device's x_max and y_max by multiplying -+ * sensor line number with DOLPHIN_COUNT_PER_ELECTRODE. -+ * -+ * e.g. When we get register's sensor_x = 11 & sensor_y = 8, -+ * real sensor line number X = 11 + 8 = 19, and -+ * real sensor line number Y = 8 + 1 = 9. -+ * So, x_max = (19 - 1) * 64 = 1152, and -+ * y_max = (9 - 1) * 64 = 512. -+ */ -+ num_x_electrode = DOLPHIN_PROFILE_XOFFSET + (param[2] & 0x0F); -+ num_y_electrode = DOLPHIN_PROFILE_YOFFSET + ((param[2] >> 4) & 0x0F); -+ priv->x_bits = num_x_electrode; -+ priv->y_bits = num_y_electrode; -+ priv->x_max = (num_x_electrode - 1) * DOLPHIN_COUNT_PER_ELECTRODE; -+ priv->y_max = (num_y_electrode - 1) * DOLPHIN_COUNT_PER_ELECTRODE; -+ -+ if (alps_exit_command_mode(psmouse)) -+ return -1; -+ -+ return 0; -+} -+ - static int alps_hw_init_dolphin_v1(struct psmouse *psmouse) - { - struct ps2dev *ps2dev = &psmouse->ps2dev; -@@ -1763,13 +1893,13 @@ static void alps_set_defaults(struct alps_data *priv) - break; - case ALPS_PROTO_V5: - priv->hw_init = alps_hw_init_dolphin_v1; -- priv->process_packet = alps_process_packet_v3; -+ priv->process_packet = alps_process_touchpad_packet_v3_v5; - priv->decode_fields = alps_decode_dolphin; - priv->set_abs_params = alps_set_abs_params_mt; - priv->nibble_commands = alps_v3_nibble_commands; - priv->addr_command = PSMOUSE_CMD_RESET_WRAP; - priv->byte0 = 0xc8; -- priv->mask0 = 0xc8; -+ priv->mask0 = 0xd8; - priv->flags = 0; - priv->x_max = 1360; - priv->y_max = 660; -@@ -1845,11 +1975,13 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv) - if (alps_match_table(psmouse, priv, e7, ec) == 0) { - return 0; - } else if (e7[0] == 0x73 && e7[1] == 0x03 && e7[2] == 0x50 && -- ec[0] == 0x73 && ec[1] == 0x01) { -+ ec[0] == 0x73 && (ec[1] == 0x01 || ec[1] == 0x02)) { - priv->proto_version = ALPS_PROTO_V5; - alps_set_defaults(priv); -- -- return 0; -+ if (alps_dolphin_get_device_area(psmouse, priv)) -+ return -EIO; -+ else -+ return 0; - } else if (ec[0] == 0x88 && ec[1] == 0x08) { - priv->proto_version = ALPS_PROTO_V3; - alps_set_defaults(priv); -diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h -index 704f0f9..03f88b6 100644 ---- a/drivers/input/mouse/alps.h -+++ b/drivers/input/mouse/alps.h -@@ -19,6 +19,10 @@ - #define ALPS_PROTO_V5 5 - #define ALPS_PROTO_V6 6 - -+#define DOLPHIN_COUNT_PER_ELECTRODE 64 -+#define DOLPHIN_PROFILE_XOFFSET 8 /* x-electrode offset */ -+#define DOLPHIN_PROFILE_YOFFSET 1 /* y-electrode offset */ -+ - /** - * struct alps_model_info - touchpad ID table - * @signature: E7 response string to match. -@@ -146,7 +150,8 @@ struct alps_data { - - int (*hw_init)(struct psmouse *psmouse); - void (*process_packet)(struct psmouse *psmouse); -- void (*decode_fields)(struct alps_fields *f, unsigned char *p); -+ void (*decode_fields)(struct alps_fields *f, unsigned char *p, -+ struct psmouse *psmouse); - void (*set_abs_params)(struct alps_data *priv, struct input_dev *dev1); - - int prev_fin; --- -1.8.4.2 - diff --git a/config-generic b/config-generic index 239ea05b..479bfda3 100644 --- a/config-generic +++ b/config-generic @@ -182,6 +182,7 @@ CONFIG_INFINIBAND_NES=m CONFIG_INFINIBAND_QIB=m CONFIG_INFINIBAND_QIB_DCA=y # CONFIG_INFINIBAND_OCRDMA is not set +# CONFIG_INFINIBAND_USNIC is not set # # Executable file formats @@ -3200,6 +3201,7 @@ CONFIG_FB_EFI=y # CONFIG_FB_BROADSHEET is not set # CONFIG_FB_UDL is not set # CONFIG_FB_GOLDFISH is not set +# CONFIG_FB_OPENCORES is not set # CONFIG_FIRMWARE_EDID is not set @@ -4511,6 +4513,7 @@ CONFIG_THERMAL_GOV_FAIR_SHARE=y # CONFIG_THERMAL_GOV_USER_SPACE is not set CONFIG_THERMAL_GOV_STEP_WISE=y # CONFIG_THERMAL_EMULATION is not set +# CONFIG_THERMAL_OF is not set # CONFIG_CPU_THERMAL is not set CONFIG_INOTIFY=y @@ -4772,6 +4775,7 @@ CONFIG_NOZOMI=m CONFIG_INPUT_APANEL=m CONFIG_INPUT_GP2A=m # CONFIG_INPUT_GPIO_TILT_POLLED is not set +# CONFIG_INPUT_GPIO_BEEPER is not set # CONFIG_INTEL_MENLOW is not set CONFIG_ENCLOSURE_SERVICES=m diff --git a/config-x86-generic b/config-x86-generic index 53d463df..3a4fd99a 100644 --- a/config-x86-generic +++ b/config-x86-generic @@ -450,6 +450,7 @@ CONFIG_PINCTRL_BAYTRAIL=y # CONFIG_INTEL_POWERCLAMP is not set CONFIG_X86_PKG_TEMP_THERMAL=m +CONFIG_ACPI_INT3403_THERMAL=m CONFIG_VMWARE_VMCI=m CONFIG_VMWARE_VMCI_VSOCKETS=m diff --git a/elantech-Properly-differentiate-between-clickpads-an.patch b/elantech-Properly-differentiate-between-clickpads-an.patch deleted file mode 100644 index 3fc49980..00000000 --- a/elantech-Properly-differentiate-between-clickpads-an.patch +++ /dev/null @@ -1,110 +0,0 @@ -Bugzilla: 1030802 -Upstream-status: http://www.mail-archive.com/linux-input@vger.kernel.org/msg07220.html - -From e1c7fa5fbb6688bd464658ff8a93bdf23c442065 Mon Sep 17 00:00:00 2001 -From: Hans de Goede <hdegoede@redhat.com> -Date: Mon, 9 Dec 2013 15:18:04 +0100 -Subject: [PATCH v2] elantech: Properly differentiate between clickpads and - normal touchpads - -The current assumption in the elantech driver that hw version 3 touchpads are -never clickpads and hw version 4 touchpads are always clickpads is wrong. - -There are several bug reports for this, ie: -https://bugzilla.redhat.com/show_bug.cgi?id=1030802 -http://superuser.com/questions/619582/right-elantech-touchpad-button-not-working-in-linux - -I've spend a couple of hours wading through various bugzillas, -launchpads and forum posts to create a list of fw-versions and capabilities -for different laptop models to find a good method to differentiate between -clickpads and versions with separate hardware buttons. - -Which shows that a device being a clickpad is reliable indicated by bit 12 -being set in the fw_version. I've included the gathered list inside the driver, -so that we've this info at hand if we need to revisit this later. - -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - drivers/input/mouse/elantech.c | 45 +++++++++++++++++++++++++++++++++++++++--- - 1 file changed, 42 insertions(+), 3 deletions(-) - -diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c -index 597e9b8..ef1cf52 100644 ---- a/drivers/input/mouse/elantech.c -+++ b/drivers/input/mouse/elantech.c -@@ -486,6 +486,7 @@ static void elantech_input_sync_v4(struct psmouse *psmouse) - unsigned char *packet = psmouse->packet; - - input_report_key(dev, BTN_LEFT, packet[0] & 0x01); -+ input_report_key(dev, BTN_RIGHT, packet[0] & 0x02); - input_mt_report_pointer_emulation(dev, true); - input_sync(dev); - } -@@ -984,6 +985,44 @@ static int elantech_get_resolution_v4(struct psmouse *psmouse, - } - - /* -+ * Advertise INPUT_PROP_BUTTONPAD for clickpads. The testing of bit 12 in -+ * fw_version for this is based on the following fw_version & caps table: -+ * -+ * Laptop-model: fw_version: caps: buttons: -+ * Acer S3 0x461f00 10, 13, 0e clickpad -+ * Acer S7-392 0x581f01 50, 17, 0d clickpad -+ * Acer V5-131 0x461f02 01, 16, 0c clickpad -+ * Acer V5-551 0x461f00 ? clickpad -+ * Asus K53SV 0x450f01 78, 15, 0c 2 hw buttons -+ * Asus G46VW 0x460f02 00, 18, 0c 2 hw buttons -+ * Asus G750JX 0x360f00 00, 16, 0c 2 hw buttons -+ * Asus UX31 0x361f00 20, 15, 0e clickpad -+ * Asus UX32VD 0x361f02 00, 15, 0e clickpad -+ * Avatar AVIU-145A2 0x361f00 ? clickpad -+ * Gigabyte U2442 0x450f01 58, 17, 0c 2 hw buttons -+ * Lenovo L430 0x350f02 b9, 15, 0c 2 hw buttons (*) -+ * Samsung NF210 0x150b00 78, 14, 0a 2 hw buttons -+ * Samsung NP770Z5E 0x575f01 10, 15, 0f clickpad -+ * Samsung NP700Z5B 0x361f06 21, 15, 0f clickpad -+ * Samsung NP900X3E-A02 0x575f03 ? clickpad -+ * Samsung NP-QX410 0x851b00 19, 14, 0c clickpad -+ * Samsung RC512 0x450f00 08, 15, 0c 2 hw buttons -+ * Samsung RF710 0x450f00 ? 2 hw buttons -+ * System76 Pangolin 0x250f01 ? 2 hw buttons -+ * (*) + 3 trackpoint buttons -+ */ -+static void elantech_set_buttonpad_prop(struct psmouse *psmouse) -+{ -+ struct input_dev *dev = psmouse->dev; -+ struct elantech_data *etd = psmouse->private; -+ -+ if (etd->fw_version & 0x001000) { -+ __set_bit(INPUT_PROP_BUTTONPAD, dev->propbit); -+ __clear_bit(BTN_RIGHT, dev->keybit); -+ } -+} -+ -+/* - * Set the appropriate event bits for the input subsystem - */ - static int elantech_set_input_params(struct psmouse *psmouse) -@@ -1026,6 +1065,8 @@ static int elantech_set_input_params(struct psmouse *psmouse) - __set_bit(INPUT_PROP_SEMI_MT, dev->propbit); - /* fall through */ - case 3: -+ if (etd->hw_version == 3) -+ elantech_set_buttonpad_prop(psmouse); - input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0); - input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0); - if (etd->reports_pressure) { -@@ -1047,9 +1088,7 @@ static int elantech_set_input_params(struct psmouse *psmouse) - */ - psmouse_warn(psmouse, "couldn't query resolution data.\n"); - } -- /* v4 is clickpad, with only one button. */ -- __set_bit(INPUT_PROP_BUTTONPAD, dev->propbit); -- __clear_bit(BTN_RIGHT, dev->keybit); -+ elantech_set_buttonpad_prop(psmouse); - __set_bit(BTN_TOOL_QUADTAP, dev->keybit); - /* For X to recognize me as touchpad. */ - input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0); --- -1.8.4.2 - diff --git a/kernel.spec b/kernel.spec index 3003c39a..c87f1838 100644 --- a/kernel.spec +++ b/kernel.spec @@ -61,7 +61,7 @@ Summary: The Linux kernel # The rc snapshot level %define rcrev 0 # The git snapshot level -%define gitrev 8 +%define gitrev 9 # Set rpm version accordingly %define rpmversion 3.%{upstream_sublevel}.0 %endif @@ -627,23 +627,15 @@ Patch25166: sunrpc-add-an-info-file-for-the-dummy-gssd-pipe.patch Patch25167: rpc_pipe-remove-the-clntXX-dir-if-creating-the-pipe-fails.patch Patch25168: rpc_pipe-fix-cleanup-of-dummy-gssd-directory-when-notification-fails.patch -#rhbz 1030802 -Patch25171: elantech-Properly-differentiate-between-clickpads-an.patch - -#rhbz 1003167 1046238 -Patch25181: 0001-Input-wacom-make-sure-touch_max-is-set-for-touch-dev.patch -Patch25182: 0002-Input-wacom-add-support-for-three-new-Intuos-devices.patch -Patch25183: 0003-Input-wacom-add-reporting-of-SW_MUTE_DEVICE-events.patch - -#rhbz 953211 -Patch25184: Input-ALPS-add-support-for-Dolphin-devices.patch - Patch25185: perf-plugin-dir.patch Patch25186: peterz-printk-timestamp-fix.patch Patch25187: revert-fsnotify-changes.patch +#rhbz 1057529 +Patch25188: 0001-usb-phy-Quiet-unable-to-find-transceiver-message.patch + # END OF PATCH DEFINITIONS %endif @@ -1293,17 +1285,6 @@ ApplyPatch rpc_pipe-remove-the-clntXX-dir-if-creating-the-pipe-fails.patch ApplyPatch sunrpc-add-an-info-file-for-the-dummy-gssd-pipe.patch ApplyPatch rpc_pipe-fix-cleanup-of-dummy-gssd-directory-when-notification-fails.patch -#rhbz 1030802 -ApplyPatch elantech-Properly-differentiate-between-clickpads-an.patch - -#rhbz 1003167 1046238 -ApplyPatch 0001-Input-wacom-make-sure-touch_max-is-set-for-touch-dev.patch -ApplyPatch 0002-Input-wacom-add-support-for-three-new-Intuos-devices.patch -ApplyPatch 0003-Input-wacom-add-reporting-of-SW_MUTE_DEVICE-events.patch - -#rhbz 953211 -ApplyPatch Input-ALPS-add-support-for-Dolphin-devices.patch - ApplyPatch perf-plugin-dir.patch ApplyPatch peterz-printk-timestamp-fix.patch @@ -1312,6 +1293,9 @@ ApplyPatch peterz-printk-timestamp-fix.patch # Revert them until they're worked out upstream ApplyPatch revert-fsnotify-changes.patch +# rhbz 1057529 +ApplyPatch 0001-usb-phy-Quiet-unable-to-find-transceiver-message.patch + # END OF PATCH APPLICATIONS %endif @@ -2091,6 +2075,10 @@ fi # ||----w | # || || %changelog +* Sat Jan 25 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.14.0-0.rc0.git9.1 +- Linux v3.13-6058-g2d08cd0 +- Quiet incorrect usb phy error (rhbz 1057529) + * Sat Jan 25 2014 Ville Skyttä <ville.skytta@iki.fi> - Own the /lib/modules dir. @@ -1,3 +1,3 @@ 0ecbaf65c00374eb4a826c2f9f37606f linux-3.13.tar.xz 732d1952898b28d5ccc264cad77b0619 perf-man-3.13.tar.gz -14d8805fe0e54d5d7b7d1c4b20c20f16 patch-3.13-git8.xz +c501aeaa0ddabd55b087c8f8d7fb954a patch-3.13-git9.xz |