#! @PERLV_PATH@
##
## $Id$
##
## @PACKAGE@ @VERSION@
## Copyright (c) 1997-2008 by Terrapin Communications, Inc.
## All rights reserved.
##
## This code is derived from software contributed to and maintained by
## Terrapin Communications, Inc. by Henry Kilmer, John Heasley, Andrew Partan,
## Pete Whiting, Austin Schutz, and Andrew Fort.
##
## Redistribution and use in source and binary forms, with or without
## modification, are permitted provided that the following conditions
## are met:
## 1. Redistributions of source code must retain the above copyright
## notice, this list of conditions and the following disclaimer.
## 2. Redistributions in binary form must reproduce the above copyright
## notice, this list of conditions and the following disclaimer in the
## documentation and/or other materials provided with the distribution.
## 3. All advertising materials mentioning features or use of this software
## must display the following acknowledgement:
## This product includes software developed by Terrapin Communications,
## Inc. and its contributors for RANCID.
## 4. Neither the name of Terrapin Communications, Inc. nor the names of its
## contributors may be used to endorse or promote products derived from
## this software without specific prior written permission.
## 5. It is requested that non-binding fixes and modifications be contributed
## back to Terrapin Communications, Inc.
##
## THIS SOFTWARE IS PROVIDED BY Terrapin Communications, INC. AND CONTRIBUTORS
## ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
## TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
## PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COMPANY OR CONTRIBUTORS
## BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
## CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
## SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
## INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
## CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
## ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
## POSSIBILITY OF SUCH DAMAGE.
#
# RANCID - Really Awesome New Cisco confIg Differ
#
# usage: rancid [-dV] [-l] [-f filename | $host]
#
# Modified by Ed Ravin for Netopia.
use Getopt::Std;
getopts('dflV');
if ($opt_V) {
print "@PACKAGE@ @VERSION@\n";
exit(0);
}
$log = $opt_l;
$debug = $opt_d;
$file = $opt_f;
$host = $ARGV[0];
$clean_run = 0;
$found_end = 0;
$found_version = 0;
$found_env = 0;
$found_diag = 0;
$timeo = 90; # clogin timeout in seconds
$clogin_pgm= $ENV{'RANCID_CLOGIN'} || "tlogin";
my(%filter_pwds); # password filtering mode
# This routine is used to print out the router configuration
sub ProcessHistory {
my($new_hist_tag,$new_command,$command_string,@string)=(@_);
if((($new_hist_tag ne $hist_tag) || ($new_command ne $command))
&& defined %history) {
print eval "$command \%history";
undef %history;
}
if (($new_hist_tag) && ($new_command) && ($command_string)) {
if ($history{$command_string}) {
$history{$command_string} = "$history{$command_string}@string";
} else {
$history{$command_string} = "@string";
}
} elsif (($new_hist_tag) && ($new_command)) {
$history{++$#history} = "@string";
} else {
print "@string";
}
$hist_tag = $new_hist_tag;
$command = $new_command;
1;
}
sub numerically { $a <=> $b; }
# This is a sort routing that will sort numerically on the
# keys of a hash as if it were a normal array.
sub keynsort {
local(%lines)=@_;
local($i) = 0;
local(@sorted_lines);
foreach $key (sort numerically keys(%lines)) {
$sorted_lines[$i] = $lines{$key};
$i++;
}
@sorted_lines;
}
# This is a sort routing that will sort on the
# keys of a hash as if it were a normal array.
sub keysort {
local(%lines)=@_;
local($i) = 0;
local(@sorted_lines);
foreach $key (sort keys(%lines)) {
$sorted_lines[$i] = $lines{$key};
$i++;
}
@sorted_lines;
}
# This is a sort routing that will sort on the
# values of a hash as if it were a normal array.
sub valsort{
local(%lines)=@_;
local($i) = 0;
local(@sorted_lines);
foreach $key (sort values %lines) {
$sorted_lines[$i] = $key;
$i++;
}
@sorted_lines;
}
# This is a numerical sort routing (ascending).
sub numsort {
local(%lines)=@_;
local($i) = 0;
local(@sorted_lines);
foreach $num (sort {$a <=> $b} keys %lines) {
$sorted_lines[$i] = $lines{$num};
$i++;
}
@sorted_lines;
}
# This is a sort routine that will sort on the
# ip address when the ip address is anywhere in
# the strings.
sub ipsort {
local(%lines)=@_;
local($i) = 0;
local(@sorted_lines);
foreach $addr (sort sortbyipaddr keys %lines) {
$sorted_lines[$i] = $lines{$addr};
$i++;
}
@sorted_lines;
}
# These two routines will sort based upon IP addresses
sub ipaddrval {
my(@a) = ($_[0] =~ m#^(\d+)\.(\d+)\.(\d+)\.(\d+)$#);
$a[3]+256*($a[2]+256*($a[1]+256*$a[0]));
}
sub sortbyipaddr {
&ipaddrval($a) <=> &ipaddrval($b);
}
# This routine parses "show version"
sub ShowVersion {
print STDERR " In ShowVersion: $_" if ($debug);
while () {
tr/\015//d;
if (/^$prompt/) { $found_version=1; last};
next if(/^(\s*|\s*$cmd\s*)$/);
return(1) if /(Invalid input detected|Type help or )/;
return(-1) if (/command authorization failed/i);
return(0) if ($found_version); # Only do this routine once
# no pagers in Netopia-land, but shouldn't hurt
s/^<-+ More -+>\s*//;
### sample output:
### #show version
### cli version: 01.00d00
### firmware version: 05.03.09f06
### hardware version: 01.00f00
### mib version: 01.00f00
### html version: 01.01d07
ProcessHistory("COMMENTS","keysort","A1","# $_");
}
return(0);
}
sub ShowConfig {
print STDERR " In ShowConfig: $_" if ($debug);
while () {
tr/\015//d;
if (/^$prompt/) { $found_end=1; $clean_run=1; return 0};
next if(/^(\s*|\s*$cmd\s*)$/);
return(1) if /(Invalid input detected|Type help or )/;
return(-1) if (/command authorization failed/i);
# no pagers in Netopia-land, but shouldn't hurt
s/^<-+ More -+>\s*//;
# no post-processing needed - just file it
ProcessHistory("","","","$_");
}
}
# dummy function
sub DoNothing {print STDOUT;}
# Main
@commandtable=(
{'show version' => "ShowVersion"},
{'show config' => "ShowConfig"},
);
# Use array to preserve order of commands, and hash for mapping to subroutine
my (%commands, @commands);
foreach (@commandtable) {
push @commands, (keys(%{$_}))[0];
$commands{$commands[$#commands]}= (values(%{$_}))[0];
};
$cisco_cmds=join(";",@commands);
$cmds_regexp=join("|",@commands);
open(OUTPUT,">$host.new") || die "Can't open $host.new for writing: $!\n";
select(OUTPUT);
# make OUTPUT unbuffered if debugging
if ($debug) { $| = 1; }
if ($file) {
print STDERR "opening file $host\n" if ($debug);
print STDOUT "opening file $host\n" if ($log);
open(INPUT,"<$host") || die "open failed for $host: $!\n";
} else {
print STDERR "executing $clogin_pgm -t $timeo -c\"$cisco_cmds\" $host\n" if ($debug);
print STDOUT "executing $clogin_pgm -t $timeo -c\"$cisco_cmds\" $host\n" if ($log);
if (defined($ENV{NOPIPE})) {
system "$clogin_pgm -t $timeo -c \"$cisco_cmds\" $host $host.raw 2>&1" || die "$clogin_pgm failed for $host: $!\n";
open(INPUT, "< $host.raw") || die "$clogin_pgm failed for $host: $!\n";
} else {
open(INPUT,"$clogin_pgm -t $timeo -c \"$cisco_cmds\" $host ) {
tr/\015//d;
if (/[>#]\s?exit$/) {
$clean_run=1;
last;
}
if (/^Error:/) {
print STDOUT ("$host $clogin_pgm error: $_");
print STDERR ("$host $clogin_pgm error: $_") if ($debug);
$clean_run=0;
last;
}
while (/#\s*($cmds_regexp)\s*$/) {
$cmd = $1;
if (!defined($prompt)) {
$prompt = "#"; # crude but effective
$prompt =~ s/([][}{)(\\])/\\$1/g;
print STDERR ("PROMPT MATCH: $prompt\n") if ($debug);
}
print STDERR ("HIT COMMAND:$_") if ($debug);
if (! defined($commands{$cmd})) {
print STDERR "$host: found unexpected command - \"$cmd\"\n";
$clean_run = 0;
last TOP;
}
$rval = &{$commands{$cmd}};
delete($commands{$cmd});
if ($rval == -1) {
$clean_run = 0;
last TOP;
}
}
}
print STDOUT "Done $logincmd: $_\n" if ($log);
# Flush History
ProcessHistory("","","","");
# Cleanup
close(INPUT);
close(OUTPUT);
if (defined($ENV{NOPIPE})) {
unlink("$host.raw") if (! $debug);
}
# check for completeness
if (scalar(%commands) || !$clean_run || !$found_end) {
if (scalar(%commands)) {
printf(STDOUT "$host: missed cmd(s): %s\n", join(',', keys(%commands)));
printf(STDERR "$host: missed cmd(s): %s\n", join(',', keys(%commands))) if ($debug);
}
if (!$clean_run || !$found_end) {
print STDOUT "$host: End of run not found\n";
print STDERR "$host: End of run not found\n" if ($debug);
system("/usr/bin/tail -1 $host.new");
}
unlink "$host.new" if (! $debug);
}