#! @PERLV_PATH@
##
## $Id$
##
## @PACKAGE@ @VERSION@
## Copyright (c) 1997-2007 by Terrapin Communications, Inc.
## All rights reserved.
##
## This code is derived from software contributed to and maintained by
## Terrapin Communications, Inc. by Henry Kilmer, John Heasley, Andrew Partan,
## Pete Whiting, Austin Schutz, and Andrew Fort.
##
## Redistribution and use in source and binary forms, with or without
## modification, are permitted provided that the following conditions
## are met:
## 1. Redistributions of source code must retain the above copyright
##    notice, this list of conditions and the following disclaimer.
## 2. Redistributions in binary form must reproduce the above copyright
##    notice, this list of conditions and the following disclaimer in the
##    documentation and/or other materials provided with the distribution.
## 3. All advertising materials mentioning features or use of this software
##    must display the following acknowledgement:
##        This product includes software developed by Terrapin Communications,
##        Inc. and its contributors for RANCID.
## 4. Neither the name of Terrapin Communications, Inc. nor the names of its
##    contributors may be used to endorse or promote products derived from
##    this software without specific prior written permission.
## 5. It is requested that non-binding fixes and modifications be contributed
##    back to Terrapin Communications, Inc.
##
## THIS SOFTWARE IS PROVIDED BY Terrapin Communications, INC. AND CONTRIBUTORS
## ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
## TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
## PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE COMPANY OR CONTRIBUTORS
## BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
## CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
## SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
## INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
## CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
## ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
## POSSIBILITY OF SUCH DAMAGE.
# 
# Amazingly hacked version of Hank's rancid - this one tries to
# deal with Junipers.
#
#  RANCID - Really Awesome New Cisco confIg Differ
#
# usage: jrancid [-dV] [-l] [-f filename | hostname]
#
use Getopt::Std;
getopts('dflV');
if ($opt_V) {
    print "@PACKAGE@ @VERSION@\n";
    exit(0);
}
$debug = $opt_d;
$log = $opt_l;
$file = $opt_f;
$host = $ARGV[0];

$clean_run = 0;
$found_end = 0;
$timeo = 120;				# clogin timeout in seconds

my(@commandtable, %commands, @commands);# command lists
my($aclsort) = ("ipsort");		# ACL sorting mode
my($filter_commstr);			# SNMP community string filtering
my($filter_pwds);			# password filtering mode
my($ShowChassisSCB);			# Only run ShowChassisSCB() once

# This routine is used to print out the router configuration
sub ProcessHistory {
    my($new_hist_tag,$new_command,$command_string,@string) = (@_);
    if ((($new_hist_tag ne $hist_tag) || ($new_command ne $command))
	&& defined %history) {
	print eval "$command \%history";
	undef %history;
    }
    if (($new_hist_tag) && ($new_command) && ($command_string)) {
	if ($history{$command_string}) {
	    $history{$command_string} = "$history{$command_string}@string";
	} else {
	    $history{$command_string} = "@string";
	}
    } elsif (($new_hist_tag) && ($new_command)) {
	$history{++$#history} = "@string";
    } else {
	print "@string";
    }
    $hist_tag = $new_hist_tag;
    $command = $new_command;
    1;
}

sub numerically { $a <=> $b; }

# This is a sort routine that will sort numerically on the
# keys of a hash as if it were a normal array.
sub keynsort {
    local(%lines) = @_;
    local($i) = 0;
    local(@sorted_lines);
    foreach $key (sort numerically keys(%lines)) {
	$sorted_lines[$i] = $lines{$key};
	$i++;
    }
    @sorted_lines;
}

# This is a sort routine that will sort on the
# keys of a hash as if it were a normal array.
sub keysort {
    local(%lines) = @_;
    local($i) = 0;
    local(@sorted_lines);
    foreach $key (sort keys(%lines)) {
	$sorted_lines[$i] = $lines{$key};
	$i++;
    }
    @sorted_lines;
}

# This is a sort routine that will sort on the
# values of a hash as if it were a normal array.
sub valsort{
    local(%lines) = @_;
    local($i) = 0;
    local(@sorted_lines);
    foreach $key (sort values %lines) {
	$sorted_lines[$i] = $key;
	$i++;
    }
    @sorted_lines;
}

# This is a numerical sort routine (ascending).
sub numsort {
    local(%lines) = @_;
    local($i) = 0;
    local(@sorted_lines);
    foreach $num (sort {$a <=> $b} keys %lines) {
	$sorted_lines[$i] = $lines{$num};
	$i++;
    }
    @sorted_lines;
}

# This is a sort routine that will sort on the
# ip address when the ip address is anywhere in
# the strings.
sub ipsort {
    local(%lines) = @_;
    local($i) = 0;
    local(@sorted_lines);
    foreach $addr (sort sortbyipaddr keys %lines) {
	$sorted_lines[$i] = $lines{$addr};
	$i++;
    }
    @sorted_lines;
}

# These two routines will sort based upon IP addresses
sub ipaddrval {
    my(@a) = ($_[0] =~ m#^(\d+)\.(\d+)\.(\d+)\.(\d+)$#);
    $a[3] + 256 * ($a[2] + 256 * ($a[1] +256 * $a[0]));
}
sub sortbyipaddr {
    &ipaddrval($a) <=> &ipaddrval($b);
}

###
### Start of real work
###

# This routine parses "show chassis clocks"
sub ShowChassisClocks {
    print STDERR "    In ShowChassisClocks: $_" if ($debug);

    s/^[a-z]+@//;
    ProcessHistory("","","","# $_");
    while (<INPUT>) {
	tr/\015//d;
	last if (/^$prompt/);
	next if (/^system (shutdown message from|going down )/i);
	next if (/^\{(master|backup)}/);

	/error: the chassis subsystem is not running/ && return;
	/Couldn\'t initiate connection/ && return;
	/Unrecognized command/ && return;
	/command is not valid/ && return;
	/^\s+\^/ && return;
	/syntax error/ && return;

	# filter decimal places of m160 measured clock MHz
	if (/Measured frequency/) {
	    s/\..*MHz/ MHz/;
	} elsif (/^.+\.[0-9]+ MHz$/) {
	    # filter for the m160 (newer format)
	    s/\.[0-9]+ MHz/ MHz/;
	} elsif (/^(.+)(\.[0-9]+) MHz/) {
	    # filter for T series
	    my($leadlen) = length($1);
	    $x = sprintf(" MHz%".length($2)."s", " ");
	    substr($_, $leadlen, length($2)+4, $x);
	}
	# filter timestamps
	next if (/selected for/i);
	next if (/selected since/i);

	next if (/deviation/i);
	ProcessHistory("","","","# $_");
    }
    return(0);
}

# This routine parses "show chassis environment"
sub ShowChassisEnvironment {
    print STDERR "    In ShowChassisEnvironment: $_" if ($debug);

    s/^[a-z]+@//;
    ProcessHistory("","","","# $_");
    while (<INPUT>) {
	tr/\015//d;
	last if (/^$prompt/);
	return 1 if (/^aborted!/i);
	next if (/^system (shutdown message from|going down )/i);
	next if (/^\{(master|backup)}/);

	/error: the chassis subsystem is not running/ && return;
	/Couldn\'t initiate connection/ && return;
	/Unrecognized command/ && return;
	/command is not valid/ && return;
	/^\s+\^/ && return;
	/syntax error/ && return;

	/ backplane temperature/ && next;
	/(\s*Power supply.*), temperature/ &&
		ProcessHistory("","","","# $1\n") && next;
	/(\s*.+) +\d+ degrees C.*$/ &&
		ProcessHistory("","","","# $1\n") && next;
	/(^.*\S)\s+ Spinning at .*$/ &&
		ProcessHistory("","","","# $1\n") && next;
	/(^.*\S)\s+Measurement/ &&
		ProcessHistory("","","","# $1\n") && next;
	ProcessHistory("","","","# $_");
    }
    return(0);
}

# This routine parses "show chassis firmware"
sub ShowChassisFirmware {
    print STDERR "    In ShowChassisFirmware: $_" if ($debug);

    s/^[a-z]+@//;
    ProcessHistory("","","","# $_");
    while (<INPUT>) {
	tr/\015//d;
	last if (/^$prompt/);
	return 1 if (/^aborted!/i);
	next if (/^system (shutdown message from|going down )/i);
	next if (/^\{(master|backup)}/);

	/error: the chassis subsystem is not running/ && return;
	/Couldn\'t initiate connection/ && return;
	/Unrecognized command/ && return;
	/command is not valid/ && return;
	/^\s+\^/ && return;
	/syntax error/ && return;

	ProcessHistory("","","","# $_");
    }
    return(0);
}

# This routine parses "show chassis fpc detail"
sub ShowChassisFpcDetail {
    print STDERR "    In ShowChassisFpcDetail: $_" if ($debug);

    s/^[a-z]+@//;
    ProcessHistory("","","","# $_");
    while (<INPUT>) {
	tr/\015//d;
	last if (/^$prompt/);
	return 1 if (/^aborted!/i);
	next if (/^system (shutdown message from|going down )/i);
	next if (/^\{(master|backup)}/);

	/error: the chassis subsystem is not running/ && return;
	/Couldn\'t initiate connection/ && return;
	/Unrecognized command/ && return;
	/command is not valid/ && return;
	/^\s+\^/ && return;
	/syntax error/ && return;

	/ Temperature/ && next;
	/ Start time/ && next;
	/ Uptime/ && next;
	ProcessHistory("","","","# $_");
    }
    return(0);
}

# This routine parses "show chassis hardware"
sub ShowChassisHardware {
    print STDERR "    In ShowChassisHardware: $_" if ($debug);

    s/^[a-z]+@//;
    ProcessHistory("","","","# $_");
    while (<INPUT>) {
	tr/\015//d;
	last if (/^$prompt/);
	return 1 if (/^aborted!/i);
	next if (/^system (shutdown message from|going down )/i);
	next if (/^\{(master|backup)}/);

	/error: the chassis subsystem is not running/ && return;
	/Couldn\'t initiate connection/ && return;
	/Unrecognized command/ && return;
	/command is not valid/ && return;
	/^\s+\^/ && return;
	/syntax error/ && return;

	ProcessHistory("","","","# $_");
    }
    return(0);
}

# This routine parses "show chassis routing-engine"
# Most output is ignored.
sub ShowChassisRoutingEngine {
    print STDERR "    In ShowChassisRoutingEngine: $_" if ($debug);

    s/^[a-z]+@//;
    ProcessHistory("","","","# $_");
    while (<INPUT>) {
	tr/\015//d;
	last if (/^$prompt/);
	next if (/^system (shutdown message from|going down )/i);
	next if (/^\{(master|backup)}/);

	/error: the chassis subsystem is not running/ && return;
	/Couldn\'t initiate connection/ && return;
	/Unrecognized command/ && return;
	/command is not valid/ && return;
	/^\s+\^/ && return;
	/syntax error/ && return;

	/^Routing Engine status:/ && ProcessHistory("","","","# $_") && next;
	/ Slot / && ProcessHistory("","","","# $_") && next;
	/ Current state/ && ProcessHistory("","","","# $_") && next;
	/ Election priority/ && ProcessHistory("","","","# $_") && next;
	/ DRAM/ && ProcessHistory("","","","# $_") && next;
	/ Model/ && ProcessHistory("","","","# $_") && next;
	/ Serial ID/ && ProcessHistory("","","","# $_") && next;
	/^\s*$/ && ProcessHistory("","","","# $_") && next;
    }
    return(0);
}

# This routine parses "show chassis cfeb", "show chassis feb", "show
# chassis scb", "show chassis sfm detail", and "show chassis ssb".
# Only do this routine once.
sub ShowChassisSCB {
    print STDERR "    In ShowChassisSCB: $_" if ($debug);

    s/^[a-z]+@//;
    ProcessHistory("","","","# $_");
    while (<INPUT>) {
	tr/\015//d;
	last if (/^$prompt/);
	next if (/^system (shutdown message from|going down )/i);
	next if (/^\{(master|backup)}/);

	return if ($ShowChassisSCB);
	/error: the chassis subsystem is not running/ && return;
	/Couldn\'t initiate connection/ && return;
	/Unrecognized command/ && return;
	/command is not valid/ && return;
	/^\s+\^/ && return;
	/syntax error/ && return;

	/ Temperature/ && next;
	/ temperature/ && next;
	/ utilization/ && next;
	/ Start time/ && next;
	/ Uptime/ && next;
	/ (IP|MLPS) routes:/ && next;
	/ used:/ && next;
	ProcessHistory("","","","# $_");
    }
    $ShowChassisSCB = 1;
    return(0);
}

# This routine parses "show chassis alarms"
sub ShowChassisAlarms {
    print STDERR "    In ShowChassisAlarms: $_" if ($debug);

    s/^[a-z]+@//;
    ProcessHistory("","","","# $_");
    while (<INPUT>) {
	tr/\015//d;
	last if (/^$prompt/);
	next if (/^system (shutdown message from|going down )/i);
	next if (/^\{(master|backup)}/);

	/Unrecognized command/ && return;
	/command is not valid/ && return;
	/^\s+\^/ && return;
	/syntax error/ && return;

	ProcessHistory("","","","# $_");
    }
    return(0);
}

# This routine parses "show system autoinstallation status"
sub ShowSystemAutoinstall {
    print STDERR "    In ShowSystemAutoinstall: $_" if ($debug);

    s/^[a-z]+@//;
    ProcessHistory("","","","# $_");
    while (<INPUT>) {
	tr/\015//d;
	last if (/^$prompt/);
	next if (/^system (shutdown message from|going down )/i);
	next if (/^\{(master|backup)}/);

	/Unrecognized command/ && return;
	/command is not valid/ && return;
	/^\s+\^/ && return;
	/syntax error/ && return;

	ProcessHistory("","","","# $_");
    }
    return(0);
}

sub ShowSystemCoreDumps {
    print STDERR "    In ShowSystemCoreDumps: $_" if ($debug);

    s/^[a-z]+@//;
    ProcessHistory("","","","# $_");
    while (<INPUT>) {
	tr/\015//d;
	last if (/^$prompt/);

	/Unrecognized command/ && return(1);
	/^\s+\^/ && return(1);
	/syntax error/ && return(1);
	/^JUNOS / && <INPUT> && next;
	/No such file or directory$/ && next;

	ProcessHistory("","","","# $_");
    }
    return(0);
}

# This routine parses "show system license"
sub ShowSystemLicense {
    print STDERR "    In ShowSystemLicense: $_" if ($debug);

    s/^[a-z]+@//;
    ProcessHistory("","","","# $_");
    while (<INPUT>) {
	tr/\015//d;
	last if (/^$prompt/);
	next if (/^system (shutdown message from|going down )/i);
	next if (/^\{(master|backup)}/);

	/Unrecognized command/ && return;
	/command is not valid/ && return;
	/^\s+\^/ && return;
	/syntax error/ && return;

	ProcessHistory("","","","# $_");
    }
    return(0);
}

# This routine parses "show system license keys"
sub ShowSystemLicenseKeys {
    print STDERR "    In ShowSystemLicenseKeys: $_" if ($debug);

    s/^[a-z]+@//;
    ProcessHistory("","","","# $_");
    while (<INPUT>) {
	tr/\015//d;
	last if (/^$prompt/);
	next if (/^system (shutdown message from|going down )/i);
	next if (/^\{(master|backup)}/);

	/Unrecognized command/ && return;
	/command is not valid/ && return;
	/^\s+\^/ && return;
	/syntax error/ && return;

	ProcessHistory("","","","# $_");
    }
    return(0);
}

# This routine parses "show system boot-messages"
sub ShowSystemBootMessages {
    print STDERR "    In ShowSystemBootMessages: $_" if ($debug);

    s/^[a-z]+@//;
    ProcessHistory("","","","# $_");
    while (<INPUT>) {
	tr/\015//d;
	last if (/^$prompt/);
	next if (/^system (shutdown message from|going down )/i);
	next if (/^\{(master|backup)}/);

	/Unrecognized command/ && return;
	/command is not valid/ && return;
	/^\s+\^/ && return;
	/syntax error/ && return;

	/^JUNOS / && <INPUT> && next;
	/^Timecounter "TSC" / && next;
	/^real memory / && next;
	/^avail memory / && next;
	/^\/dev\// && next;
	ProcessHistory("","","","# $_");
    }
    return(0);
}

# This routine parses "show version"
sub ShowVersion {
    print STDERR "    In ShowVersion: $_" if ($debug);

    s/^[a-z]+@//;
    ProcessHistory("","","","# $_");
    while (<INPUT>) {
	tr/\015//d;
	last if (/^$prompt/);
	next if (/^\s*$/);
	next if (/^system (shutdown message from|going down )/i);
	next if (/^\{(master|backup)}/);

	/^Juniper Networks is:/ && ProcessHistory("","","","# \n# $_") && next;
	ProcessHistory("","","","# $_");
    }
    ProcessHistory("","","","#\n");

    return(0);
}

# This routine parses "show configuration"
sub ShowConfiguration {
    my($lines) = 0;
    my($snmp) = 0;
    print STDERR "    In ShowConfiguration: $_" if ($debug);

    s/^[a-z]+@//;
    ProcessHistory("","","","# $_");
    while (<INPUT>) {
	tr/\015//d;
	next if (/^\s*$/);
	# end of config - hopefully.  juniper does not have a reliable
	# end-of-config tag.  appears to end with "\nPROMPT>", but not sure.
	if (/^$prompt/) {
	    $found_end++;
	    last;
	}
	next if (/^system (shutdown message from|going down )/i);
	next if (/^\{(master|backup)}/);
	$lines++;

	/^database header mismatch: / && return(-1);
	/^version .*;\d+$/ && return(-1);

	s/ # SECRET-DATA$//;
	s/ ## SECRET-DATA$//;
	# filter snmp community, when in snmp { stanza }
	/^snmp/ && $snmp++;
	/^}/ && ($snmp = 0);
	if ($snmp && /^(\s*)(community|trap-group) [^ ;]+(\s?[;{])$/) {
		if ($filter_commstr) {
		    $_ = "$1$2 \"<removed>\"$3\n";
		}
	}
	if (/(\s*authentication-key )[^ ;]+/ && $filter_pwds >= 1) {
	    ProcessHistory("","","","#$1<removed>$'");
	    next;
	}
	if (/(\s*md5 \d+ key )[^ ;]+/ && $filter_pwds >= 1) {
	    ProcessHistory("","","","#$1<removed>$'");
	    next;
	}
	if (/(\s*hello-authentication-key )[^ ;]+/ && $filter_pwds >= 1) {
	    ProcessHistory("","","","#$1<removed>$'");
	    next;
	}
	# don't filter this one - there is no secret here.
	if (/^\s*permissions .* secret /) {
	    ProcessHistory("","","","$_");
	    next;
	}
	if (/^(.*\ssecret )[^ ;]+/ && $filter_pwds >= 1) {
	    ProcessHistory("","","","#$1<removed>$'");
	    next;
	}
	if (/(\s+encrypted-password )[^ ;]+/ && $filter_pwds >= 2) {
	    ProcessHistory("","","","#$1<removed>$'");
	    next;
	}
	if (/(\s+ssh-(rsa|dsa) )\"/ && $filter_pwds >= 2) {
	    ProcessHistory("","","","#$1<removed>;\n");
	    next;
	}
	if (/^(\s+(pre-shared-|)key (ascii-text|hexadecimal) )[^ ;]+/ && $filter_pwds >= 1) {
	    ProcessHistory("","","","#$1<removed>$'");
	    next;
	}
	ProcessHistory("","","","$_");
    }

    if ($lines < 3) {
	printf(STDERR "ERROR: $host configuration appears truncated.\n");
	$found_end = 0;
	return(-1);
    }

    return(0);
}

###
### End of real work
###

# dummy function
sub DoNothing {print STDOUT;}

# Main
@commandtable = (
	{'show chassis clocks'		=> 'ShowChassisClocks'},
	{'show chassis environment'	=> 'ShowChassisEnvironment'},
	{'show chassis firmware'	=> 'ShowChassisFirmware'},
	{'show chassis fpc detail'	=> 'ShowChassisFpcDetail'},
	{'show chassis hardware detail'	=> 'ShowChassisHardware'},
	{'show chassis routing-engine'	=> 'ShowChassisRoutingEngine'},
	{'show chassis scb'		=> 'ShowChassisSCB'},
	{'show chassis sfm detail'	=> 'ShowChassisSCB'},
	{'show chassis ssb'		=> 'ShowChassisSCB'},
	{'show chassis feb detail'	=> 'ShowChassisSCB'},
	{'show chassis feb'		=> 'ShowChassisSCB'},
	{'show chassis cfeb'		=> 'ShowChassisSCB'},
	{'show chassis alarms'		=> 'ShowChassisAlarms'},
#	{'show system autoinstallation status' => 'ShowSystemAutoinstall'},
	{'show system license'		=> 'ShowSystemLicense'},
#	{'show system license keys'	=> 'ShowSystemLicenseKeys'},
	{'show system boot-messages'	=> 'ShowSystemBootMessages'},
	{'show system core-dumps'	=> 'ShowSystemCoreDumps'},
	{'show version detail'		=> 'ShowVersion'},
	{'show configuration'		=> 'ShowConfiguration'}
);
# Use an array to preserve the order of the commands and a hash for mapping
# commands to the subroutine and track commands that have been completed.
@commands = map(keys(%$_), @commandtable);
%commands = map(%$_, @commandtable);

$jnx_commands=join(";",@commands);
$cmds_regexp=join("|",@commands);

if (length($host) == 0) {
    if ($file) {
	print(STDERR "Too few arguments: file name required\n");
	exit(1);
    } else {
	print(STDERR "Too few arguments: host name required\n");
	exit(1);
    }
}
open(OUTPUT,">$host.new") || die "Can't open $host.new for writing: $!\n";
select(OUTPUT);
# make OUTPUT unbuffered
if ($debug) { $| = 1; }

if ($file) {
    print STDERR "opening file $host\n" if ($debug);
    print STDOUT "opening file $host\n" if ($log);
    open(INPUT,"< $host") || die "open failed for $host: $!\n";
} else {
    print(STDERR "executing echo jlogin -t $timeo -c\"$jnx_commands\" $host\n") if ($debug);
    print(STDOUT "executing echo jlogin -t $timeo -c\"$jnx_commands\" $host\n") if ($debug);

    if (defined($ENV{NOPIPE})) {
	system "jlogin -t $timeo -c \"$jnx_commands\" $host </dev/null > $host.raw" || die "jlogin failed for $host: $!\n";
	open(INPUT, "< $host.raw") || die "jlogin failed for $host: $!\n";
    } else {
	open(INPUT,"jlogin -t $timeo -c \"$jnx_commands\" $host </dev/null |") || die "jlogin failed for $host: $!\n";
    }

}

# determine ACL sorting mode
if ($ENV{"ACLSORT"} =~ /no/i) {
    $aclsort = "";
}
# determine community string filtering mode
if (defined($ENV{"NOCOMMSTR"}) &&
    ($ENV{"NOCOMMSTR"} =~ /yes/i || $ENV{"NOCOMMSTR"} =~ /^$/)) {
    $filter_commstr = 1;
} else {
    $filter_commstr = 0;
}
# determine password filtering mode
if ($ENV{"FILTER_PWDS"} =~ /no/i) {
    $filter_pwds = 0;
} elsif ($ENV{"FILTER_PWDS"} =~ /all/i) {
    $filter_pwds = 2;
} else {
    $filter_pwds = 1;
}

ProcessHistory("","","","# RANCID-CONTENT-TYPE: juniper\n#\n");
TOP: while (<INPUT>) {
    tr/\015//d;
    if (/^Error:/) {
	print STDOUT ("$host jlogin error: $_");
	print STDERR ("$host jlogin error: $_") if ($debug);
	$clean_run=0;
	last;
    }
    if (/System shutdown message/) {
	print STDOUT ("$host shutdown msg: $_");
	print STDERR ("$host shutdown msg: $_") if ($debug);
	$clean_run = 0;
	last;
    }
    if (/error: cli version does not match Managment Daemon/i) {
	print STDOUT ("$host mgd version mismatch: $_");
	print STDERR ("$host mgd version mismatch: $_") if ($debug);
	$clean_run = 0;
	last;
    }
    while (/>\s*($cmds_regexp)\s*$/) {
	$cmd = $1;
	if (!defined($prompt)) {
	    $prompt = ($_ =~ /^([^>]+>)/)[0];
	    $prompt =~ s/([][}{)(\\])/\\$1/g;
	    print STDERR ("PROMPT MATCH: $prompt\n") if ($debug);
	}
	print STDERR ("HIT COMMAND:$_") if ($debug);
	if (! defined($commands{$cmd})) {
	    print STDERR "$host: found unexpected command - \"$cmd\"\n";
	    $clean_run = 0;
	    last TOP;
	}
	$rval = &{$commands{$cmd}};
	delete($commands{$cmd});
	if ($rval == -1) {
	    $clean_run = 0;
	    last TOP;
	}
    }
    if (/>\s*quit/) {
	$clean_run=1;
	last;
    }
}
print STDOUT "Done jlogin: $_\n" if ($log);
# Flush History
ProcessHistory("","","","");
# Cleanup
close(INPUT);
close(OUTPUT);

if (defined($ENV{NOPIPE})) {
    unlink("$host.raw") if (! $debug);
}

# check for completeness
$commands = join(", ", keys(%commands));
if (scalar(%commands) || !$clean_run || !$found_end) {
    if (scalar(%commands)) {
	printf(STDOUT "$host: missed cmd(s): %s\n", join(',', keys(%commands)));
	printf(STDERR "$host: missed cmd(s): %s\n", join(',', keys(%commands))) if ($debug);
    }
    if (!$clean_run || !$found_end) {
	print STDOUT "$host: End of run not found\n";
	print STDERR "$host: End of run not found\n" if ($debug);
	system("/usr/bin/tail -1 $host.new");
    }
    unlink "$host.new" if (! $debug);
}