#! @PERLV_PATH@
##
## $Id: hrancid.in,v 1.17 2004/01/11 03:49:13 heas Exp $
##
## Copyright (C) 1997-2004 by Terrapin Communications, Inc.
## All rights reserved.
##
## This software may be freely copied, modified and redistributed
## without fee for non-commerical purposes provided that this license
## remains intact and unmodified with any RANCID distribution.
##
## There is no warranty or other guarantee of fitness of this software.
## It is provided solely "as is".  The author(s) disclaim(s) all
## responsibility and liability with respect to this software's usage
## or its effect upon hardware, computer systems, other software, or
## anything else.
##
## Except where noted otherwise, rancid was written by and is maintained by
## Henry Kilmer, John Heasley, Andrew Partan, Pete Whiting, and Austin Schutz.
##
#
# Amazingly hacked version of Hank's rancid - this one tries to
# deal with HP procurves.
#
#  RANCID - Really Awesome New Cisco confIg Differ
#
# usage: rancid [-d] [-l] [-f filename | $host]
#
use Getopt::Std;
getopts('dfl');
$log = $opt_l;
$debug = $opt_d;
$file = $opt_f;
$host = $ARGV[0];
$clean_run = 0;
$found_end = 0;			# unused - hp lacks an end-of-config tag.
$timeo = 90;			# clogin timeout in seconds

my(%filter_pwds);		# password filtering mode

# This routine is used to print out the router configuration
sub ProcessHistory {
    my($new_hist_tag,$new_command,$command_string,@string)=(@_);
    if((($new_hist_tag ne $hist_tag) || ($new_command ne $command))
       && defined %history) {
	print eval "$command \%history";
	undef %history;
    }
    if (($new_hist_tag) && ($new_command) && ($command_string)) {
	if ($history{$command_string}) {
	    $history{$command_string} = "$history{$command_string}@string";
	} else {
	    $history{$command_string} = "@string";
	}
    } elsif (($new_hist_tag) && ($new_command)) {
	$history{++$#history} = "@string";
    } else {
	print "@string";
    }
    $hist_tag = $new_hist_tag;
    $command = $new_command;
    1;
}

sub numerically { $a <=> $b; }

# This is a sort routing that will sort numerically on the
# keys of a hash as if it were a normal array.
sub keynsort {
    local(%lines)=@_;
    local($i) = 0;
    local(@sorted_lines);
    foreach $key (sort numerically keys(%lines)) {
	$sorted_lines[$i] = $lines{$key};
	$i++;
    }
    @sorted_lines;
}

# This is a sort routing that will sort on the
# keys of a hash as if it were a normal array.
sub keysort {
    local(%lines)=@_;
    local($i) = 0;
    local(@sorted_lines);
    foreach $key (sort keys(%lines)) {
	$sorted_lines[$i] = $lines{$key};
	$i++;
    }
    @sorted_lines;
}

# This is a sort routing that will sort on the
# values of a hash as if it were a normal array.
sub valsort{
    local(%lines)=@_;
    local($i) = 0;
    local(@sorted_lines);
    foreach $key (sort values %lines) {
	$sorted_lines[$i] = $key;
	$i++;
    }
    @sorted_lines;
}

# This is a numerical sort routing (ascending).
sub numsort {
    local(%lines)=@_;
    local($i) = 0;
    local(@sorted_lines);
    foreach $num (sort {$a <=> $b} keys %lines) {
	$sorted_lines[$i] = $lines{$num};
	$i++;
    }
    @sorted_lines;
}

# This is a sort routine that will sort on the
# ip address when the ip address is anywhere in
# the strings.
sub ipsort {
    local(%lines)=@_;
    local($i) = 0;
    local(@sorted_lines);
    foreach $addr (sort sortbyipaddr keys %lines) {
	$sorted_lines[$i] = $lines{$addr};
	$i++;
    }
    @sorted_lines;
}

# These two routines will sort based upon IP addresses
sub ipaddrval {
    my(@a) = ($_[0] =~ m#^(\d+)\.(\d+)\.(\d+)\.(\d+)$#);
    $a[3]+256*($a[2]+256*($a[1]+256*$a[0]));
}
sub sortbyipaddr {
    &ipaddrval($a) <=> &ipaddrval($b);
}

# This routine parses "show version"
sub ShowVersion {
    print STDERR "    In ShowVersion: $_" if ($debug);

    while (<INPUT>) {
	tr/\015//d;
	last if(/^$prompt/);
	next if(/^(\s*|\s*$cmd\s*)$/);
	return(-1) if (/command authorization failed/i);
	return(-1) if /^(Invalid|Ambiguous) input:/i;

	s/^image//i;
	s/^\s*//g;

	ProcessHistory("COMMENTS","keysort","C1", ";Image: $_") && next;
    }
    return(0);
}

# This routine parses "show flash"
sub ShowFlash {
    # skip if this is 7000, 7200, 7500, or 12000; else we end up with
    # redundant data from dir /all slot0:
    print STDERR "    In ShowFlash: $_" if ($debug);

    while (<INPUT>) {
	tr/\015//d;
	last if (/^$prompt/);
	next if (/^(\s*|\s*$cmd\s*)$/);
	return(-1) if (/command authorization failed/i);
	return(1) if /^(Invalid|Ambiguous) input:/i;
	return(1) if /^\s*\^\s*$/;

	ProcessHistory("COMMENTS","keysort","D0",";Flash: $_");
    }

    return;
}

# This routine parses "show system-information"
sub ShowSystem {
    print STDERR "    In ShowSystem: $_" if ($debug);

    while (<INPUT>) {
	tr/\015//d;
	last if (/^$prompt/);
	next if (/^(\s*|\s*$cmd\s*)$/);
	return(-1) if (/command authorization failed/i);
	return(-1) if /^(Invalid|Ambiguous) input:/i;

	/memory\s+-\s+total\s+:\s+(\S+)/i &&
	    ProcessHistory("COMMENTS","keysort","B0",";Memory: $1\n");
	/serial\s+number\s+:\s+(\S+)/i &&
	    ProcessHistory("COMMENTS","keysort","A1",";Serial Number: $1\n");
	/firmware\s+revision\s+:\s+(\S+)/i &&
	    ProcessHistory("COMMENTS","keysort","C0",";Image: Firmware $1\n");
	/rom\s+version\s+:\s+(\S+)/i &&
	    ProcessHistory("COMMENTS","keysort","C1",";Image: ROM $1\n");
    }
    return(0);
}

# This routine parses "show module".
sub ShowModule {
    print STDERR "    In ShowModule: $_" if ($debug);

    my(@lines);
    my($slot);

    while (<INPUT>) {
	tr/\015//d;
	return if (/^\s*\^$/);
	last if (/^$prompt/);
	next if (/^(\s*|\s*$cmd\s*)$/);
	return(-1) if (/command authorization failed/i);
	return(1) if /^(Invalid|Ambiguous) input:/i;

	ProcessHistory("COMMENTS","keysort","E0","; $_") && next;
    }

    return(0);
}

# This routine parses "show stack"
sub ShowStack {
    print STDERR "    In ShowStack: $_" if ($debug);

    while (<INPUT>) {
	tr/\015//d;
	last if (/^$prompt/);
	next if (/^(\s*|\s*$cmd\s*)$/);
	return(-1) if (/command authorization failed/i);
	return(-1) if /^(Invalid|Ambiguous) input:/i;

	s/stacking - (Stacking Status).*/$1/i;
	s/\s*members unreachable .*$//i;

	ProcessHistory("COMMENTS","keysort","F0",";$_");

	/auto grab/i && last;
    }
    return(0);
}

# This routine processes a "write term"
sub WriteTerm {
    print STDERR "    In WriteTerm: $_" if ($debug);

    while (<INPUT>) {
	tr/\015//d;
	last if(/^$prompt/);
	return(-1) if (/command authorization failed/i);
	# the pager can not be disabled per-session on the PIX
	s/^<-+ More -+>\s*//;
	s/^$/;/;

	# skip the crap
	/^running configuration:/i && next;

	# filter out any RCS/CVS tags to avoid confusing local CVS storage
	s/\$(Revision|Id):/ $1:/;
	/^; (\S+) configuration editor;/i &&
	    ProcessHistory("COMMENTS","keysort","A0",";Chassis type: $1\n") &&
	    next;

	# order logging statements - doesnt appear to do syslog as of right now
	/^logging (\d+\.\d+\.\d+\.\d+)/ &&
	    ProcessHistory("LOGGING","ipsort","$1","$_") && next;

	# no so sure this match is correct.  show running doesnt seem to
	# actually o/p anything after "password (manager|operator)"
	if (/^(\s*)password (manager|operator)?/ && $filter_pwds >= 1) {
	    ProcessHistory("LINE-PASS","","",";$1password $2 <removed>\n");
	    next;
	}

	if (/^(snmp-server community) (\S+)/) {
	    if (defined($ENV{'NOCOMMSTR'})) {
		ProcessHistory("SNMPSERVERCOMM","keysort","$_",
			";$1 <removed>$'") && next;
	    } else {
		ProcessHistory("SNMPSERVERCOMM","keysort","$_","$_") && next;
	    }
	}
	# order/prune snmp-server host statements - it actually appears to do
	# the sortting for us, but just in case it changes ...
	# we only prune lines of the form
	# snmp-server host a.b.c.d <community>
	if (/^snmp-server host (\d+\.\d+\.\d+\.\d+) /) {
	    if (defined($ENV{'NOCOMMSTR'})) {
		my($ip) = $1;
		my($line) = "snmp-server host $ip";
		my(@tokens) = split(' ', $');
		my($token);
		while ($token = shift(@tokens)) {
		    if ($token eq 'version') {
			$line .= " " . join(' ', ($token, shift(@tokens)));
		    } elsif ($token =~ /^(informs?|traps?|(no)?auth)$/) {
			$line .= " " . $token;
		    } else {
			$line = ";$line " . join(' ', ("<removed>", join(' ',@tokens)));
			last;
		    }
		}
		ProcessHistory("SNMPSERVERHOST","ipsort","$ip","$line\n");
	    } else {
		ProcessHistory("SNMPSERVERHOST","ipsort","$1","$_");
	    }
	    next;
	}

	# order/prune tacacs/radius server statements
	if (/^(tacacs-server|radius-server) key / && $filter_pwds >= 1) {
	    ProcessHistory("","","",";$1 key <removed>\n");
	    next;
	}
	if (/^(tacacs-server host \d+\.\S+) key / && $filter_pwds >= 1) {
	    ProcessHistory("","","",";$1 key <removed>\n");
	    next;
	}

	# prune passwords from stack member statements
	if (/^(stack member .* password )\S+/ && $filter_pwds >= 1) {
	    ProcessHistory("","","",";$1<removed>$'");
	    next;
	}

	# order arp lists
	/^ip arp\s+(\d+\.\d+\.\d+\.\d+)/ &&
	    ProcessHistory("ARP","ipsort","$1","$_") && next;

	/^ip prefix-list\s+(\S+)\s+seq\s+(\d+)\s+(permit|deny)\s+(\d\S+)(\/.*)$/ &&
	    ProcessHistory("PACL $1 $3","ipsort","$4","ip prefix-list $1 $3 $4$5\n")
	    && next;

	# blech!!!!
	/^auto-tftp / &&
	    ProcessHistory("","","",";$_") && next;


	# the rest are from rancid (i.e.: cisco), but suspect they will someday
	# be applicable or close to it.

	/^tftp-server flash /   && next; # kill any tftp remains
	/^ntp clock-period /    && next; # kill ntp clock-period
	/^ length /		&& next; # kill length on serial lines
	/^ width /		&& next; # kill width on serial lines
	if (/^(enable )?(password|passwd) / && $filter_pwds >= 1) {
	    ProcessHistory("ENABLE","","",";$1$2 <removed>\n");
	    next;
	}
	if (/^username (\S+)(\s.*)? password /) {
	    if ($filter_pwds >= 1) {
		ProcessHistory("USER","keysort","$1",";username $1$2 password <removed>\n");
	    } else {
		ProcessHistory("USER","keysort","$1","$_");
	    }
	    next;
	}

	if (/^(ip ftp password) / && $filter_pwds >= 1) {
	    ProcessHistory("","","",";$1 <removed>\n"); next;
	}
	if (/^( ip ospf authentication-key) / && $filter_pwds >= 1) {
	    ProcessHistory("","","",";$1 <removed>\n"); next;
	}
	if (/^( ip ospf message-digest-key \d+ md5) / && $filter_pwds >= 1) {
	    ProcessHistory("","","",";$1 <removed>\n"); next;
	}
	# sort route-maps
	if (/^route-map (\S+)/) {
	    my($key) = $1;
	    my($routemap) = $_;
	    while (<INPUT>) {
		tr/\015//d;
		last if (/^$prompt/ || ! /^(route-map |[ !])/);
		if (/^route-map (\S+)/) {
		    ProcessHistory("ROUTEMAP","keysort","$key","$routemap");
		    $key = $1;
		    $routemap = $_;
		} else  {
		    $routemap .= $_;
		}
	    }
	    ProcessHistory("ROUTEMAP","keysort","$key","$routemap");
	}
	# order access-lists
	/^access-list\s+(\d\d?)\s+(\S+)\s+(\S+)/ &&
	    ProcessHistory("ACL $1 $2","ipsort","$3","$_") && next;
	# order extended access-lists
	/^access-list\s+(\d\d\d)\s+(\S+)\s+ip\s+host\s+(\S+)/ &&
	    ProcessHistory("EACL $1 $2","ipsort","$3","$_") && next;
	/^access-list\s+(\d\d\d)\s+(\S+)\s+ip\s+(\d\S+)/ &&
	    ProcessHistory("EACL $1 $2","ipsort","$3","$_") && next;
	/^access-list\s+(\d\d\d)\s+(\S+)\s+ip\s+any/ &&
	    ProcessHistory("EACL $1 $2","ipsort","0.0.0.0","$_") && next;

	# order alias statements
	/^alias / && ProcessHistory("ALIAS","keysort","$_","$_") && next;
	# delete ntp auth password
	if (/^(ntp authentication-key \d+ md5) / && $filter_pwds >= 1) {
	    ProcessHistory("","","",";$1 <removed>\n"); next;
	}
	# order ntp peers/servers
	if (/^ntp (server|peer) (\d+)\.(\d+)\.(\d+)\.(\d+)/) {
	    $sortkey = sprintf("$1 %03d%03d%03d%03d",$2,$3,$4,$5);
	    ProcessHistory("NTP","keysort",$sortkey,"$_");
	    next;
	}
	# order ip host line statements
	/^ip host line(\d+)/ &&
	    ProcessHistory("IPHOST","numsort","$1","$_") && next;
	# order ip nat source static statements
	/^ip nat (\S+) source static (\S+)/ &&
	    ProcessHistory("IP NAT $1","ipsort","$2","$_") && next;
	# order ip rcmd lines
	/^ip rcmd/ && ProcessHistory("RCMD","keysort","$_","$_") && next;

	# catch anything that wasnt match above.
	ProcessHistory("","","","$_");
    }
    return(0);
}

# dummy function
sub DoNothing {print STDOUT;}

# Main
%commands=(
	'show version'		=> "ShowVersion",
	'show flash'		=> "ShowFlash",
	'show system-information'	=> "ShowSystem",
	'show module'		=> "ShowModule",
	'show stack'		=> "ShowStack",
	'write term'		=> "WriteTerm"
);
# keys() doesnt return things in the order entered and the order of the
# cmds is important (show version first and write term last). pita
@commands=(
	"show version",
	"show flash",
	"show system-information",
	"show module",
	"show stack",
	"write term"
);
$cisco_cmds=join(";",@commands);
$cmds_regexp=join("|",@commands);

open(OUTPUT,">$host.new") || die "Can't open $host.new for writing: $!\n";
select(OUTPUT);
# make OUTPUT unbuffered if debugging
if ($debug) { $| = 1; }

if ($file) {
    print STDERR "opening file $host\n" if ($debug);
    print STDOUT "opening file $host\n" if ($log);
    open(INPUT,"<$host") || die "open failed for $host: $!\n";
} else {
    print STDERR "executing hlogin -t $timeo -c\"$cisco_cmds\" $host\n" if ($debug);
    print STDOUT "executing hlogin -t $timeo -c\"$cisco_cmds\" $host\n" if ($log);
    if (defined($ENV{NOPIPE})) {
	system "hlogin -t $timeo -c \"$cisco_cmds\" $host </dev/null > $host.raw 2>&1" || die "hlogin failed for $host: $!\n";
	open(INPUT, "< $host.raw") || die "hlogin failed for $host: $!\n";
    } else {
	open(INPUT,"hlogin -t $timeo -c \"$cisco_cmds\" $host </dev/null |") || die "hlogin failed for $host: $!\n";
    }
}

# determine password filtering mode
if ($ENV{"FILTER_PWDS"} =~ /no/i) {
	$filter_pwds = 0;  
} elsif ($ENV{"FILTER_PWDS"} =~ /all/i) {
	$filter_pwds = 2;
} else {
	$filter_pwds = 1;
}

ProcessHistory("","","",";RANCID-CONTENT-TYPE: hp-procurve\n;\n");
ProcessHistory("COMMENTS","keysort","B0",";\n");	# memory info
ProcessHistory("COMMENTS","keysort","C0",";\n");	# showversion
ProcessHistory("COMMENTS","keysort","D0",";\n");	# showflash
ProcessHistory("COMMENTS","keysort","E0",";\n");	# showmodule
ProcessHistory("COMMENTS","keysort","F0",";\n");	# showstack
ProcessHistory("COMMENTS","keysort","G0",";\n");
TOP: while(<INPUT>) {
    tr/\015//d;
    if (/$prompt\s*exit\s*$/i) {
	$clean_run=1;
	last;
    }
    if (/^Error:/) {
	print STDOUT ("$host clogin error: $_");
	print STDERR ("$host clogin error: $_") if ($debug);
	$clean_run=0;
	last;
    }
    while (/#\s*($cmds_regexp)\s*$/) {
	$cmd = $1;
	if (!defined($prompt)) {
	    $prompt = ($_ =~ /^([^#]+)/)[0];
	    $prompt =~ s/([][}{)(\\])/\\$1/g;
	    $prompt .= "[#>]";
	    print STDERR ("PROMPT MATCH: $prompt\n") if ($debug);
	}
	print STDERR ("HIT COMMAND:$_") if ($debug);
	if (! defined($commands{$cmd})) {
	    print STDERR "$host: found unexpected command - \"$cmd\"\n";
	    $clean_run = 0;
	    last TOP;
	}
	$rval = &{$commands{$cmd}};
	delete($commands{$cmd});
	if ($rval == -1) {
	    $clean_run = 0;
	    last TOP;
	}
    }
}
print STDOUT "Done $logincmd: $_\n" if ($log);
# Flush History
ProcessHistory("","","","");
# Cleanup
close(INPUT);
close(OUTPUT);

if (defined($ENV{NOPIPE})) {
    unlink("$host.raw") if (! $debug);
}

# check for completeness
if (scalar(%commands) || !$clean_run) {
    if (scalar(%commands)) {
	printf(STDOUT "$host: missed cmd(s): %s\n", join(',', keys(%commands)));
	printf(STDERR "$host: missed cmd(s): %s\n", join(',', keys(%commands))) if ($debug);
    }
    if (!$clean_run) {
	print STDOUT "$host: End of run not found\n";
	print STDERR "$host: End of run not found\n" if ($debug);
	system("/usr/bin/tail -1 $host.new");
    }
    unlink "$host.new" if (! $debug);
}