#!@PERLV_PATH@
##
## Amazingly hacked version of Hank's rancid - this one tries to
## deal with HPs.
##
## Copyright (C) 1997-2001 by Henry Kilmer.
## All rights reserved.
##
## This software may be freely copied, modified and redistributed without
## fee for non-commerical purposes provided that this copyright notice is
## preserved intact on all copies and modified copies.
##
## There is no warranty or other guarantee of fitness of this software.
## It is provided solely "as is". The author(s) disclaim(s) all
## responsibility and liability with respect to this software's usage
## or its effect upon hardware, computer systems, other software, or
## anything else.
##
##
#
# RANCID - Really Awesome New Cisco confIg Differ
#
# usage: rancid [-d] [-l] [-f filename | $host]
#
use Getopt::Std;
getopts('dflm');
$log = $opt_l;
$debug = $opt_d;
$file = $opt_f;
$host = $ARGV[0];
$clean_run = 0;
$found_end = 0;
$timeo = 90; # clogin timeout in seconds
# This routine is used to print out the router configuration
sub ProcessHistory {
my($new_hist_tag,$new_command,$command_string,@string)=(@_);
if((($new_hist_tag ne $hist_tag) || ($new_command ne $command))
&& defined %history) {
print eval "$command \%history";
undef %history;
}
if (($new_hist_tag) && ($new_command) && ($command_string)) {
if ($history{$command_string}) {
$history{$command_string} = "$history{$command_string}@string";
} else {
$history{$command_string} = "@string";
}
} elsif (($new_hist_tag) && ($new_command)) {
$history{++$#history} = "@string";
} else {
print "@string";
}
$hist_tag = $new_hist_tag;
$command = $new_command;
1;
}
sub numerically { $a <=> $b; }
# This is a sort routing that will sort numerically on the
# keys of a hash as if it were a normal array.
sub keynsort {
local(%lines)=@_;
local($i) = 0;
local(@sorted_lines);
foreach $key (sort numerically keys(%lines)) {
$sorted_lines[$i] = $lines{$key};
$i++;
}
@sorted_lines;
}
# This is a sort routing that will sort on the
# keys of a hash as if it were a normal array.
sub keysort {
local(%lines)=@_;
local($i) = 0;
local(@sorted_lines);
foreach $key (sort keys(%lines)) {
$sorted_lines[$i] = $lines{$key};
$i++;
}
@sorted_lines;
}
# This is a sort routing that will sort on the
# values of a hash as if it were a normal array.
sub valsort{
local(%lines)=@_;
local($i) = 0;
local(@sorted_lines);
foreach $key (sort values %lines) {
$sorted_lines[$i] = $key;
$i++;
}
@sorted_lines;
}
# This is a numerical sort routing (ascending).
sub numsort {
local(%lines)=@_;
local($i) = 0;
local(@sorted_lines);
foreach $num (sort {$a <=> $b} keys %lines) {
$sorted_lines[$i] = $lines{$num};
$i++;
}
@sorted_lines;
}
# This is a sort routine that will sort on the
# ip address when the ip address is anywhere in
# the strings.
sub ipsort {
local(%lines)=@_;
local($i) = 0;
local(@sorted_lines);
foreach $addr (sort sortbyipaddr keys %lines) {
$sorted_lines[$i] = $lines{$addr};
$i++;
}
@sorted_lines;
}
# These two routines will sort based upon IP addresses
sub ipaddrval {
my(@a) = ($_[0] =~ m#^(\d+)\.(\d+)\.(\d+)\.(\d+)$#);
$a[3]+256*($a[2]+256*($a[1]+256*$a[0]));
}
sub sortbyipaddr {
&ipaddrval($a) <=> &ipaddrval($b);
}
# This routine parses "show version"
sub ShowVersion {
print STDERR " In ShowVersion: $_" if ($debug);
while () {
tr/\015//d;
last if(/^$prompt/);
next if(/^(\s*|\s*$cmd\s*)$/);
return(-1) if (/command authorization failed/i);
if (/^Slave in slot (\d+) is running/) {
$slave = " Slave:";
next;
}
/^Cisco Secure PIX /i &&
ProcessHistory("COMMENTS","keysort","F1", "!Image: $_") && next;
/^IOS .* Software \(([A-Za-z-0-9]*)\), .*Version\s+(.*)$/ &&
ProcessHistory("COMMENTS","keysort","F1",
"!Image:$slave Software: $1, $2\n") && next;
/^([A-Za-z-0-9_]*) Synced to mainline version: (.*)$/ &&
ProcessHistory("COMMENTS","keysort","F2",
"!Image:$slave $1 Synced to mainline version: $2\n") && next;
/^Compiled (.*)$/ &&
ProcessHistory("COMMENTS","keysort","F3",
"!Image:$slave Compiled: $1\n") && next;
/^ROM: (System )?Bootstrap.*(Version.*)$/ &&
ProcessHistory("COMMENTS","keysort","G1",
"!ROM Bootstrap: $2\n") && next;
if (/^Hardware:\s+(.*), (.* RAM), CPU (.*)$/) {
ProcessHistory("COMMENTS","keysort","A1",
"!Chassis type: $1 - a PIX\n");
ProcessHistory("COMMENTS","keysort","A2",
"!CPU: $3\n");
ProcessHistory("COMMENTS","keysort","B1", "!Memory: $2\n");
}
/^Serial Number:\s+(.*)$/ &&
ProcessHistory("COMMENTS","keysort","C1", "!$_") && next;
/^Activation Key:\s+(.*)$/ &&
ProcessHistory("COMMENTS","keysort","C2", "!$_") && next;
/^ROM: \d+ Bootstrap .*(Version.*)$/ &&
ProcessHistory("COMMENTS","keysort","G2",
"!ROM Image: Bootstrap $1\n!\n") && next;
/^ROM: .*(Version.*)$/ &&
ProcessHistory("COMMENTS","keysort","G3","!ROM Image: $1\n") && next;
/^BOOTFLASH: .*(Version.*)$/ &&
ProcessHistory("COMMENTS","keysort","G4","!BOOTFLASH: $1\n") && next;
/^System image file is "([^\"]*)", booted via (\S*)/ &&
# removed the booted source due to
# CSCdk28131: cycling info in 'sh ver'
# ProcessHistory("COMMENTS","keysort","F4","!Image: booted via $2, $1\n") &&
ProcessHistory("COMMENTS","keysort","F4","!Image: booted $1\n") &&
next;
/^System image file is "([^\"]*)"$/ &&
ProcessHistory("COMMENTS","keysort","F5","!Image: $1\n") && next;
if (/(\S+)\s+\((\S+)\)\s+processor.*with (\S+K) bytes/) {
my($proc) = $1;
my($cpu) = $2;
my($mem) = $3;
my($device) = "router";
if ( $1 eq "CSC") {
$type = "AGS";
} elsif ( $1 eq "CSC4") {
$type = "AGS+";
} elsif ( $1 eq "2511" || $1 eq "2524" || $1 eq "AS2511-RJ") {
$type = "2500";
} elsif ( $1 =~ /261[01]/ || $1 =~ /262[01]/ ) {
$type = "2600";
} elsif ( $1 eq "3620" || $1 eq "3640") {
$type = "3600";
} elsif ( $1 eq "RSP7000") {
$type = "7500";
} elsif ( $1 =~ /RSP\d/) {
$type = "7500";
} elsif ( $1 eq "RP1") {
$type = "7000";
} elsif ( $1 eq "RP") {
$type = "7000";
} elsif ( $1 =~ /720[246]/) {
$type = "7200";
} elsif ( $1 =~ /1200[48]\/GRP/ || $1 =~ /1201[26]\/GRP/) {
$type = "12000";
} elsif ( $1 =~ /1201[26]-8R\/GRP/) {
$type = "12000";
} elsif ( $1 =~ /WS-C29/) {
$type = "2900XL";
$device = "switch";
} elsif ( $1 =~ /WS-C35/) {
$type = "3500XL";
$device = "switch";
} elsif ( $1 =~ /6000/) {
$type = "6000";
$device = "switch";
} else {
$type = $1;
}
print STDERR "TYPE = $type\n" if ($debug);
ProcessHistory("COMMENTS","keysort","A1",
"!Chassis type:$slave $proc - a $type $device\n");
ProcessHistory("COMMENTS","keysort","B1",
"!Memory:$slave main $mem\n");
ProcessHistory("COMMENTS","keysort","A3","!CPU:$slave $cpu\n");
next;
}
if (/(\S+) Silicon\s*Switch Processor/) {
if (!defined($C0)) {
$C0=1; ProcessHistory("COMMENTS","keysort","C0","!\n");
}
ProcessHistory("COMMENTS","keysort","C2","!SSP: $1\n");
$ssp = 1;
$sspmem = $1;
next;
}
/^(\d+K) bytes of multibus/ &&
ProcessHistory("COMMENTS","keysort","B2",
"!Memory: multibus $1\n") && next;
/^(\d+K) bytes of non-volatile/ &&
ProcessHistory("COMMENTS","keysort","B3",
"!Memory: nvram $1\n") && next;
/^(\d+K) bytes of flash memory/ &&
ProcessHistory("COMMENTS","keysort","B5","!Memory: flash $1\n") &&
next;
/^(\d+K) bytes of .*flash partition/ &&
ProcessHistory("COMMENTS","keysort","B6",
"!Memory: flash partition $1\n") && next;
/^(\d+K) bytes of Flash internal/ &&
ProcessHistory("COMMENTS","keysort","B4",
"!Memory: bootflash $1\n") && next;
if(/^(\d+K) bytes of (Flash|ATA)?.*PCMCIA .*slot ?(\d)/i) {
ProcessHistory("COMMENTS","keysort","B7",
"!Memory: pcmcia $2 slot$3 $1\n");
next;
}
if(/^WARNING/) {
if (!defined($I0)) {
$I0=1;
ProcessHistory("COMMENTS","keysort","I0","!\n");
}
ProcessHistory("COMMENTS","keysort","I1","! $_");
# The line after the WARNING is what to do about it.
$_ = ; tr/\015//d;
ProcessHistory("COMMENTS","keysort","I1","! $_");
}
if (/^Configuration register is (.*)$/) {
$config_register=$1;
next;
}
}
return(0);
}
# This routine parses "show flash"
sub ShowFlash {
# skip if this is 7000, 7200, 7500, or 12000; else we end up with
# redundant data from dir /all slot0:
print STDERR " In ShowFlash: $_" if ($debug);
while () {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if ($type =~ /^(12[40]|7)/);
return(-1) if (/command authorization failed/i);
return(1) if /^\s*\^\s*$/;
return(1) if /(Invalid input detected|Type help or )/;
ProcessHistory("FLASH","","","!Flash: $_");
}
ProcessHistory("","","","!\n");
return;
}
# This routine parses "show system-information"
sub ShowSystem {
print STDERR " In ShowSystem: $_" if ($debug);
while () {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
# return(1) if ($type =~ /^(12[40]|7[05])/);
return(-1) if (/command authorization failed/i);
if (/^Interface ([^ \n(]*)/) { $INT = "$1, "; next; }
/^(BRI unit \d)/ &&
ProcessHistory("INT","","","!Interface: $1\n") && next;
/^LANCE unit \d, NIM/ &&
ProcessHistory("INT","","","!Interface: $_") && next;
/^(LANCE unit \d)/ &&
ProcessHistory("INT","","","!Interface: $1\n") && next;
/(Media Type is \S+),/ &&
ProcessHistory("INT","","","!\t$1\n");
if (/(M\dT[^ :]*:) show controller:$/) {
my($ctlr) = $1;
$_ = ; tr/\015//d; s/ subunit \d,//;
ProcessHistory("INT","","","!Interface: $ctlr $_");
}
if (/^(\S+) : show controller:$/) {
my($ctlr) = $1;
$_ = ; tr/\015//d; s/ subunit \d,//;
ProcessHistory("INT","","","!Interface: $ctlr: $_");
}
/^(HD unit \d), idb/ &&
ProcessHistory("INT","","","!Interface: $1\n") && next;
/^HD unit \d, NIM/ &&
ProcessHistory("INT","","","!Interface: $_") && next;
/^buffer size \d+ HD unit \d, (.*)/ &&
ProcessHistory("INT","","","!\t$1\n") && next;
/^AM79970 / && ProcessHistory("INT","","","!Interface: $_") && next;
/^buffer size \d+ (Universal Serial: .*)/ &&
ProcessHistory("INT","","","!\t$1\n") && next;
/^Hardware is (.*)/ &&
ProcessHistory("INT","","","!Interface: $INT$1\n") && next;
/^(QUICC Serial unit \d),/ &&
ProcessHistory("INT","","","!$1\n") && next;
/^QUICC Ethernet .*/ &&
ProcessHistory("INT","","","!$_") && next;
/^DTE .*\.$/ &&
ProcessHistory("INT","","","!\t$_") && next;
/^(cable type :.*),/ &&
ProcessHistory("INT","","","!\t$1\n") && next;
/^(.* cable.*), received clockrate \d+$/ &&
ProcessHistory("INT","","","!\t$1\n") && next;
/^.* cable.*$/ &&
ProcessHistory("INT","","","!\t$_") && next;
}
return(0);
}
# This routine parses "show module".
sub ShowModule {
print STDERR " In ShowModule: $_" if ($debug);
my(@lines);
my($slot);
while () {
tr/\015//d;
return if (/^\s*\^$/);
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(-1) if (/command authorization failed/i);
# match slot/card info line
if (/^ *(\d+)\s+(\d+)\s+(.*)\s+(\S+)\s+(\S+)\s*$/) {
$lines[$1] .= "!Slot $1: type $3, $2 ports\n!Slot $1: part $4, serial $5\n";
$lines[$1] =~ s/\s+,/,/g;
}
# now match the Revs in the second paragraph of o/p and stick it in
# the array with the previous bits...grumble.
if (/^ *(\d+)\s+\S+\s+to\s+\S+\s+(\S+)\s+(.*)\s+(\S+)\s*$/) {
$lines[$1] .= "!Slot $1: hvers $2, firmware $3, sw $4\n";
$lines[$1] =~ s/\s+,/,/g;
}
}
foreach $slot (@lines) {
next if ($slot =~ /^\s*$/);
ProcessHistory("Module","","","$slot!\n");
}
return(0);
}
# This routine parses "show stack"
sub ShowStack {
print STDERR " In ShowStack: $_" if ($debug);
while () {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(-1) if (/command authorization failed/i);
/^$/ && next;
if (/C7200 Midplane EEPROM:/) {
$_ = ;
/revision\s+(\S+).*revision\s+(\S+)/;
ProcessHistory("SLOT","","","!Slot Midplane: hvers $1 rev $2\n");
$_ = ;
/number\s+(\S+)\s+Part number\s+(\S+)/;
ProcessHistory("SLOT","","","!Slot Midplane: part $2, serial $1\n!\n");
next;
}
if (/C720\d(VXR)? CPU EEPROM:/) {
$_ = ;
/revision\s+(\S+).*revision\s+(\S+)/ &&
ProcessHistory("SLOT","","","!Slot CPU: hvers $1 rev $2\n");
$_ = ;
/number\s+(\S+)\s+Part number\s+(\S+)/ &&
ProcessHistory("SLOT","","","!Slot CPU: part $2, serial $1\n!\n");
next;
}
}
return(0);
}
# This routine processes a "write term"
sub WriteTerm {
print STDERR " In WriteTerm: $_" if ($debug);
while () {
tr/\015//d;
last if(/^$prompt/);
return(-1) if (/command authorization failed/i);
# the pager can not be disabled per-session on the PIX
s/^<-+ More -+>\s*//;
/Non-Volatile memory is in use/ && return(-1); # NvRAM is locked
# skip the crap
if (/^(##+$|Building configuration...)/i) {
while () {
next if (/^Current configuration\s*:/i);
next if (/^:/);
next if (/^([%!].*|\s*)$/);
next if (/^ip add.*ipv4:/); # band-aid for 3620 12.0S
last;
}
if (defined($config_register)) {
ProcessHistory("","","","!\nconfig-register $config_register\n");
}
tr/\015//d;
}
# some versions have other crap mixed in with the bits in the
# block above
/^! (Last configuration|NVRAM config last)/ && next;
# Dog gone Cool matches to process the rest of the config
/^tftp-server flash / && next; # kill any tftp remains
/^ntp clock-period / && next; # kill ntp clock-period
/^ length / && next; # kill length on serial lines
/^ width / && next; # kill width on serial lines
/^ clockrate / && next; # kill clockrate on serial interfaces
/^(enable )?(password|passwd) / &&
ProcessHistory("ENABLE","","","!$1$2 \n") &&
next;
/^username (\S+)(\s.*)? password /&&
ProcessHistory("USER","keysort","$1","!username $1$2 password \n") && next;
/^\s*password / &&
ProcessHistory("LINE-PASS","","","! password \n") && next;
/^\s*neighbor (\S*) password / &&
ProcessHistory("","","","! neighbor $1 password \n") &&
next;
/^(ip ftp password) / &&
ProcessHistory("","","","!$1 \n") && next;
/^( ip ospf authentication-key) / &&
ProcessHistory("","","","!$1 \n") && next;
/^( ip ospf message-digest-key \d+ md5) / &&
ProcessHistory("","","","!$1 \n") && next;
/fair-queue individual-limit/ && next;
# sort ip explicit-paths.
if (/^ip explicit-path name (\S+)/) {
my($key) = $1;
my($expath) = $_;
while () {
tr/\015//d;
last if (/^$prompt/);
last if (/^$prompt/ || ! /^(ip explicit-path name |[ !])/);
if (/^ip explicit-path name (\S+)/) {
ProcessHistory("EXPATH","keysort","$key","$expath");
$key = $1;
$expath = $_;
} else {
$expath .= $_;
}
}
ProcessHistory("EXPATH","keysort","$key","$expath");
}
# sort route-maps
if (/^route-map (\S+)/) {
my($key) = $1;
my($routemap) = $_;
while () {
tr/\015//d;
last if (/^$prompt/ || ! /^(route-map |[ !])/);
if (/^route-map (\S+)/) {
ProcessHistory("ROUTEMAP","keysort","$key","$routemap");
$key = $1;
$routemap = $_;
} else {
$routemap .= $_;
}
}
ProcessHistory("ROUTEMAP","keysort","$key","$routemap");
}
# filter out any RCS/CVS tags to avoid confusing local CVS storage
s/\$(Revision|Id):/ $1:/;
# order access-lists
/^access-list\s+(\d\d?)\s+(\S+)\s+(\S+)/ &&
ProcessHistory("ACL $1 $2","ipsort","$3","$_") && next;
# order extended access-lists
/^access-list\s+(\d\d\d)\s+(\S+)\s+ip\s+host\s+(\S+)/ &&
ProcessHistory("EACL $1 $2","ipsort","$3","$_") && next;
/^access-list\s+(\d\d\d)\s+(\S+)\s+ip\s+(\d\S+)/ &&
ProcessHistory("EACL $1 $2","ipsort","$3","$_") && next;
/^access-list\s+(\d\d\d)\s+(\S+)\s+ip\s+any/ &&
ProcessHistory("EACL $1 $2","ipsort","0.0.0.0","$_") && next;
# order arp lists
/^arp\s+(\d+\.\d+\.\d+\.\d+)\s+/ &&
ProcessHistory("ARP","ipsort","$1","$_") && next;
/^ip prefix-list\s+(\S+)\s+seq\s+(\d+)\s+(permit|deny)\s+(\d\S+)(\/.*)$/ &&
ProcessHistory("PACL $1 $3","ipsort","$4","ip prefix-list $1 $3 $4$5\n")
&& next;
# order logging statements
/^logging (\d+\.\d+\.\d+\.\d+)/ &&
ProcessHistory("LOGGING","ipsort","$1","$_") && next;
# order/prune snmp-server host statements
# we only prune lines of the form
# snmp-server host a.b.c.d
if (/^snmp-server host (\d+\.\d+\.\d+\.\d+) /) {
if (defined($ENV{'NOCOMMSTR'})) {
my($ip) = $1;
my($line) = "snmp-server host $ip";
my(@tokens) = split(' ', $');
my($token);
while ($token = shift(@tokens)) {
if ($token eq 'version') {
$line .= " " . join(' ', ($token, shift(@tokens)));
} elsif ($token =~ /^(informs?|traps?|(no)?auth)$/) {
$line .= " " . $token;
} else {
$line = "!$line " . join(' ', ("", join(' ',@tokens)));
last;
}
}
ProcessHistory("SNMPSERVERHOST","ipsort","$ip","$line\n");
} else {
ProcessHistory("SNMPSERVERHOST","ipsort","$1","$_");
}
next;
}
if (/^(snmp-server community) (\S+)/) {
if (defined($ENV{'NOCOMMSTR'})) {
ProcessHistory("SNMPSERVERCOMM","keysort","$_","!$1 $'") && next;
} else {
ProcessHistory("SNMPSERVERCOMM","keysort","$_","$_") && next;
}
}
# order/prune tacacs/radius server statements
/^(tacacs-server|radius-server) key / &&
ProcessHistory("","","","!$1 key \n") && next;
# order clns host statements
/^clns host \S+ (\S+)/ &&
ProcessHistory("CLNS","keysort","$1","$_") && next;
# order alias statements
/^alias / && ProcessHistory("ALIAS","keysort","$_","$_") && next;
# delete ntp auth password
/^(ntp authentication-key \d+ md5) / &&
ProcessHistory("","","","!$1 \n") && next;
# order ntp peers/servers
if (/^ntp (server|peer) (\d+)\.(\d+)\.(\d+)\.(\d+)/) {
$sortkey = sprintf("$1 %03d%03d%03d%03d",$2,$3,$4,$5);
ProcessHistory("NTP","keysort",$sortkey,"$_");
next;
}
# order ip host line statements
/^ip host line(\d+)/ &&
ProcessHistory("IPHOST","numsort","$1","$_") && next;
# order ip nat source static statements
/^ip nat (\S+) source static (\S+)/ &&
ProcessHistory("IP NAT $1","ipsort","$2","$_") && next;
# order atm map-list statements
/^\s+ip\s+(\d+\.\d+\.\d+\.\d+)\s+atm-vc/ &&
ProcessHistory("ATM map-list","ipsort","$1","$_") && next;
# order ip rcmd lines
/^ip rcmd/ && ProcessHistory("RCMD","keysort","$_","$_") && next;
# system controller
/^syscon address (\S*) (\S*)/ &&
ProcessHistory("","","","!syscon address $1 \n") &&
next;
/^syscon password (\S*)/ &&
ProcessHistory("","","","!syscon password \n") &&
next;
# catch anything that wasnt match above.
ProcessHistory("","","","$_");
# end of config
#if (/^end(\n\[OK])?$/) {
if (/^(: )?end$/) {
$found_end = 1;
return(1);
}
}
return(0);
}
# dummy function
sub DoNothing {print STDOUT;}
# Main
%commands=(
'show version' => "ShowVersion",
'show flash' => "ShowFlash",
'show system-information' => "ShowSystem",
'show module' => "ShowModule",
'show stack' => "ShowStack",
'write term' => "WriteTerm"
);
# keys() doesnt return things in the order entered and the order of the
# cmds is important (show version first and write term last). pita
@commands=(
"show version",
"show flash",
"show system-information",
"show module",
"show stack",
"write term"
);
$cisco_cmds=join(";",@commands);
$cmds_regexp=join("|",@commands);
open(OUTPUT,">$host.new") || die "Can't open $host.new for writing: $!\n";
select(OUTPUT);
# make OUTPUT unbuffered if debugging
if ($debug) { $| = 1; }
if ($file) {
print STDERR "opening file $host\n" if ($debug);
print STDOUT "opening file $host\n" if ($log);
open(INPUT,"<$host") || die "open failed for $host: $!\n";
} else {
print STDERR "executing hlogin -t $timeo -c\"$cisco_cmds\" $host\n" if ($debug);
print STDOUT "executing hlogin -t $timeo -c\"$cisco_cmds\" $host\n" if ($log);
if (defined($ENV{NOPIPE})) {
system "hlogin -t $timeo -c \"$cisco_cmds\" $host $host.raw 2>&1" || die "hlogin failed for $host: $!\n";
open(INPUT, "< $host.raw") || die "hlogin failed for $host: $!\n";
} else {
open(INPUT,"hlogin -t $timeo -c \"$cisco_cmds\" $host ) {
tr/\015//d;
if (/\#\s?exit$/) {
$clean_run=1;
last;
}
if (/^Error:/) {
print STDOUT ("$host clogin error: $_");
print STDERR ("$host clogin error: $_") if ($debug);
$clean_run=0;
last;
}
while (/#\s*($cmds_regexp)\s*$/) {
$cmd = $1;
if (!defined($prompt)) {$prompt = ($_ =~ /^([^#]+#)/)[0]; }
print STDERR ("HIT COMMAND:$_") if ($debug);
if (! defined($commands{$cmd})) {
print STDERR "found unexpected command - \"$cmd\"\n";
$clean_run = 0;
last TOP;
}
$rval = &{$commands{$cmd}};
delete($commands{$cmd});
if ($rval == -1) {
$clean_run = 0;
last TOP;
}
}
}
print STDOUT "Done $logincmd: $_\n" if ($log);
# Flush History
ProcessHistory("","","","");
# Cleanup
close(INPUT);
close(OUTPUT);
if (defined($ENV{NOPIPE})) {
unlink("$host.raw") if (! $debug);
}
# check for completeness
if (scalar(%commands) || !$clean_run || !$found_end) {
if (scalar(%commands)) {
printf(STDOUT "missed cmd(s): %s\n", join(',', keys(%commands)));
printf(STDERR "missed cmd(s): %s\n", join(',', keys(%commands))) if ($debug);
}
if (!$clean_run || !$found_end) {
print STDOUT "End of run not found\n";
print STDERR "End of run not found\n" if ($debug);
system("/usr/bin/tail -1 $host.new");
}
unlink "$host.new" if (! $debug);
}