#! @PERLV_PATH@
##
## $Id: cssrancid.in,v 1.11 2005/09/25 17:48:29 heas Exp $
##
## Copyright (C) 1997-2004 by Terrapin Communications, Inc.
## All rights reserved.
##
## This software may be freely copied, modified and redistributed
## without fee for non-commerical purposes provided that this license
## remains intact and unmodified with any RANCID distribution.
##
## There is no warranty or other guarantee of fitness of this software.
## It is provided solely "as is".  The author(s) disclaim(s) all
## responsibility and liability with respect to this software's usage
## or its effect upon hardware, computer systems, other software, or
## anything else.
##
## Except where noted otherwise, rancid was written by and is maintained by
## Henry Kilmer, John Heasley, Andrew Partan, Pete Whiting, and Austin Schutz.
##
#
#  RANCID - Really Awesome New Cisco confIg Differ
#
# usage: rancid [-d] [-l] [-f filename | hostname]
#
use Getopt::Std;
getopts('dfl');
$log = $opt_l;
$debug = $opt_d;
$file = $opt_f;
$host = $ARGV[0];
$clean_run = 0;
$found_end = 0;
$timeo = 90;				# clogin timeout in seconds

my(@commandtable, %commands, @commands);# command lists
my(%filter_pwds);			# password filtering mode

# This routine is used to print out the router configuration
sub ProcessHistory {
    my($new_hist_tag,$new_command,$command_string,@string) = (@_);
    if ((($new_hist_tag ne $hist_tag) || ($new_command ne $command))
	&& defined %history) {
	print eval "$command \%history";
	undef %history;
    }
    if (($new_hist_tag) && ($new_command) && ($command_string)) {
	if ($history{$command_string}) {
	    $history{$command_string} = "$history{$command_string}@string";
	} else {
	    $history{$command_string} = "@string";
	}
    } elsif (($new_hist_tag) && ($new_command)) {
	$history{++$#history} = "@string";
    } else {
	print "@string";
    }
    $hist_tag = $new_hist_tag;
    $command = $new_command;
    1;
}

sub numerically { $a <=> $b; }

# This is a sort routine that will sort numerically on the
# keys of a hash as if it were a normal array.
sub keynsort {
    local(%lines) = @_;
    local($i) = 0;
    local(@sorted_lines);
    foreach $key (sort numerically keys(%lines)) {
	$sorted_lines[$i] = $lines{$key};
	$i++;
    }
    @sorted_lines;
}

# This is a sort routine that will sort on the
# keys of a hash as if it were a normal array.
sub keysort {
    local(%lines) = @_;
    local($i) = 0;
    local(@sorted_lines);
    foreach $key (sort keys(%lines)) {
	$sorted_lines[$i] = $lines{$key};
	$i++;
    }
    @sorted_lines;
}

# This is a sort routine that will sort on the
# values of a hash as if it were a normal array.
sub valsort{
    local(%lines) = @_;
    local($i) = 0;
    local(@sorted_lines);
    foreach $key (sort values %lines) {
	$sorted_lines[$i] = $key;
	$i++;
    }
    @sorted_lines;
}

# This is a numerical sort routine (ascending).
sub numsort {
    local(%lines) = @_;
    local($i) = 0;
    local(@sorted_lines);
    foreach $num (sort {$a <=> $b} keys %lines) {
	$sorted_lines[$i] = $lines{$num};
	$i++;
    }
    @sorted_lines;
}

# This is a sort routine that will sort on the
# ip address when the ip address is anywhere in
# the strings.
sub ipsort {
    local(%lines) = @_;
    local($i) = 0;
    local(@sorted_lines);
    foreach $addr (sort sortbyipaddr keys %lines) {
	$sorted_lines[$i] = $lines{$addr};
	$i++;
    }
    @sorted_lines;
}

# These two routines will sort based upon IP addresses
sub ipaddrval {
    my(@a) = ($_[0] =~ m#^(\d+)\.(\d+)\.(\d+)\.(\d+)$#);
    $a[3] + 256 * ($a[2] + 256 * ($a[1] +256 * $a[0]));
}
sub sortbyipaddr {
    &ipaddrval($a) <=> &ipaddrval($b);
}

# This routine parses "show version"
sub ShowVersion {
    print STDERR "    In ShowVersion: $_" if ($debug);

    while (<INPUT>) {
	tr/\015//d;
	last if(/^$prompt/);
	next if(/^(\s*|\s*$cmd\s*)$/);
	return(-1) if (/command authorization failed/i);
	if (/^Slave in slot (\d+) is running/) {
	    $slave = " Slave:";
	    next;
	}
	/^Cisco Secure PIX /i &&
	    ProcessHistory("COMMENTS","keysort","F1", "!Image: $_") && next;
	/^IOS .* Software \(([A-Za-z-0-9]*)\), .*Version\s+(.*)$/ &&
	    ProcessHistory("COMMENTS","keysort","F1",
		"!Image:$slave Software: $1, $2\n") && next;
	/^([A-Za-z-0-9_]*) Synced to mainline version: (.*)$/ &&
	    ProcessHistory("COMMENTS","keysort","F2",
		"!Image:$slave $1 Synced to mainline version: $2\n") && next;
	/^Compiled (.*)$/ &&
	    ProcessHistory("COMMENTS","keysort","F3",
		"!Image:$slave Compiled: $1\n") && next;
	/^ROM: (System )?Bootstrap.*(Version.*)$/ &&
	    ProcessHistory("COMMENTS","keysort","G1",
		"!ROM Bootstrap: $2\n") && next;
	if (/^Hardware:\s+(.*), (.* RAM), CPU (.*)$/) {
	    ProcessHistory("COMMENTS","keysort","A1",
		"!Chassis type: $1 - a PIX\n");
	    ProcessHistory("COMMENTS","keysort","A2",
		"!CPU: $3\n");
	    ProcessHistory("COMMENTS","keysort","B1", "!Memory: $2\n");
	}
	/^Serial Number:\s+(.*)$/ &&
	    ProcessHistory("COMMENTS","keysort","C1", "!$_") && next;
	/^Activation Key:\s+(.*)$/ &&
	    ProcessHistory("COMMENTS","keysort","C2", "!$_") && next;
	/^ROM: \d+ Bootstrap .*(Version.*)$/ &&
	    ProcessHistory("COMMENTS","keysort","G2",
		"!ROM Image: Bootstrap $1\n!\n") && next;
	/^ROM: .*(Version.*)$/ &&
	    ProcessHistory("COMMENTS","keysort","G3","!ROM Image: $1\n") && next;
	/^BOOTFLASH: .*(Version.*)$/ &&
	    ProcessHistory("COMMENTS","keysort","G4","!BOOTFLASH: $1\n") && next;
	/^BOOTLDR: .*(Version.*)$/ &&
	    ProcessHistory("COMMENTS","keysort","G4","!BOOTLDR: $1\n") && next;
	/^System image file is "([^\"]*)", booted via (\S*)/ &&
	    ProcessHistory("COMMENTS","keysort","F4","!Image: booted $1\n") &&
	    next;
	/^System image file is "([^\"]*)"$/ &&
	    ProcessHistory("COMMENTS","keysort","F5","!Image: $1\n") && next;
	if (/(\S+)\s+\((\S+)\)\s+processor.*with (\S+[kK]) bytes/) {
	    my($proc) = $1;
	    my($cpu) = $2;
	    my($mem) = $3;
	    my($device) = "router";
	    $type = "CSS";
	    print STDERR "TYPE = $type\n" if ($debug);
	    ProcessHistory("COMMENTS","keysort","A1",
		"!Chassis type:$slave $proc - a $type $device\n");
	    ProcessHistory("COMMENTS","keysort","B1",
		"!Memory:$slave main $mem\n");
	    ProcessHistory("COMMENTS","keysort","A3","!CPU:$slave $cpu\n");
	    next;
	}
	if (/(\S+) Silicon\s*Switch Processor/) {
	    if (!defined($C0)) {
		$C0=1; ProcessHistory("COMMENTS","keysort","C0","!\n");
	    }
	    ProcessHistory("COMMENTS","keysort","C2","!SSP: $1\n");
	    $ssp = 1;
	    $sspmem = $1;
	    next;
	}
	/^(\d+[kK]) bytes of multibus/ &&
	    ProcessHistory("COMMENTS","keysort","B2",
		"!Memory: multibus $1\n") && next;
	/^(\d+[kK]) bytes of non-volatile/ &&
	    ProcessHistory("COMMENTS","keysort","B3",
		"!Memory: nvram $1\n") && next;
	/^(\d+[kK]) bytes of flash memory/ &&
	    ProcessHistory("COMMENTS","keysort","B5","!Memory: flash $1\n") &&
	    next;
	/^(\d+[kK]) bytes of .*flash partition/ &&
	    ProcessHistory("COMMENTS","keysort","B6",
		"!Memory: flash partition $1\n") && next;
	/^(\d+[kK]) bytes of Flash internal/ &&
	    ProcessHistory("COMMENTS","keysort","B4",
		"!Memory: bootflash $1\n") && next;
	if(/^(\d+[kK]) bytes of (Flash|ATA)?.*PCMCIA .*(slot|disk) ?(\d)/i) {
	    ProcessHistory("COMMENTS","keysort","B7",
		"!Memory: pcmcia $2 $3$4 $1\n");
	    next;
	}
	if(/^WARNING/) {
	    if (!defined($I0)) {
		$I0=1;
		ProcessHistory("COMMENTS","keysort","I0","!\n");
	    }
	    ProcessHistory("COMMENTS","keysort","I1","! $_");
	    # The line after the WARNING is what to do about it.
	    $_ = <INPUT>; tr/\015//d;
	    ProcessHistory("COMMENTS","keysort","I1","!          $_");
	}
	if (/^Configuration register is (.*)$/) {
	    $config_register=$1;
	    next;
	}
    }
    return(0);
}


# Dummy routine to set term length....
sub TermLength {
    # Dummy subroutine.. need to set term length differently for CSS
    # boxes as term length 0 doesnt work correctly. POS.
    print STDERR "    In TermLength: $_" if ($debug);
    $_ = <INPUT>;
    return(0);
}

# Dummy routine to copy profile...
sub CopyProfile {
    ##  Because the term length gets changed twice,  the stupid
    ##  box will ask you to save or discard changes.  This prompt
    ##  of couse breaks the interaction... strangely enough tho
    ##  in a failover environment, only the secondary behaves this
    ##  way.. the primary lets you log out and does not complain.
    print STDERR "    In CopyProfile: $_" if ($debug);
    $_ = <INPUT>;
    return(0);
}


# This routine parses "show boot"
sub ShowBoot {
    # Pick up boot variables if 7000/7200/7500/12000/2900/3500;
    # otherwise pick up bootflash.
    print STDERR "    In ShowBoot: $_" if ($debug);

    while (<INPUT>) {
	tr/\015//d;
	last if (/^$prompt/);
	next if (/^(\s*|\s*$cmd\s*)$/);
	return(1) if /^\s*\^\s*$/;
	return(-1) if (/command authorization failed/i);
	return(1) if /Ambiguous command/i;
	# return(1) if /(Invalid input detected|Type help or )/;
	return(1) if /(Open device \S+ failed|Error opening \S+:)/;
	next if (/\*\* BOOT CONFIG /);
	next if /CONFGEN variable/;
	if (!defined($H0)) {
	    $H0=1; ProcessHistory("COMMENTS","keysort","H0","!\n");
	}
	if ($type !~ /^(12[04]|7)/) {
	    if ($type !~ /^(29|35)00/) {
		ProcessHistory("COMMENTS","keysort","H2","!BootFlash: $_");
	    } else {
		ProcessHistory("COMMENTS","keysort","H1","!Variable: $_");
	    }
	} elsif (/variable/) {
	    ProcessHistory("COMMENTS","keysort","H1","!Variable: $_");
	}
    }
    ProcessHistory("COMMENTS","","","!\n");
    return(0);
}


# This routine processes a "show run"
sub ShowRun {
    print STDERR "    In ShowRun: $_" if ($debug);
    my($lines) = 0;

    while (<INPUT>) {
	tr/\015//d;
	if(/^$prompt/) {
	    $found_end = 1 if ($lines > 4);
	    return(1);
	}
	return(-1) if (/command authorization failed/i);
	# the pager can not be disabled per-session on the PIX
	s/^<-+ More -+>\s*//;
	/Non-Volatile memory is in use/  && return(-1); # NvRAM is locked
	# skip the crap
	if (/^(##+$|(Building|Current) configuration)/i) {
	    while (<INPUT>) {
		next if (/^Current configuration\s*:/i);
		next if (/^:/);
		next if (/^([%!].*|\s*)$/);
		next if (/^ip add.*ipv4:/);	# band-aid for 3620 12.0S
		last;
	    }
	    if (defined($config_register)) {
		ProcessHistory("","","","!\nconfig-register $config_register\n");
	    }
	    tr/\015//d;
	}
	# some versions have other crap mixed in with the bits in the
	# block above
	/^! (Last configuration|NVRAM config last)/ && next;
	##  CSS specific....
	/Generated on/ && next;
	$lines++;

	# Dog gone Cool matches to process the rest of the config
	/^tftp-server flash /   && next; # kill any tftp remains
	/^ntp clock-period /    && next; # kill ntp clock-period
	/^ length /		&& next; # kill length on serial lines
	/^ width /		&& next; # kill width on serial lines
	/^ speed /		&& next; # kill speed on serial lines
	/^ clockrate /		&& next; # kill clockrate on serial interfaces
	if (/^(enable )?(password|passwd) / && $filter_pwds >= 1) {
	    ProcessHistory("ENABLE","","","!$1$2 <removed>\n");
	    next;
	}
	if (/^(enable secret) / && $filter_pwds >= 2) {
	    ProcessHistory("ENABLE","","","!$1 <removed>\n");
	    next;
	}
	if (/^username (\S+)(\s.*)? secret /) {
	    if ($filter_pwds >= 2) {
		ProcessHistory("USER","keysort","$1","!username $1$2 secret <removed>\n");
	    } else {
		ProcessHistory("USER","keysort","$1","$_");
	    }
	    next;
	}
	if (/\s*username (\S+)(\s.*)? (des-password|password) (\S+|\S+)/) {
	    if ($filter_pwds >= 1) {
		ProcessHistory("USER","keysort","$1","! username $1$2 $3 <removed>$'\n");
	    } else {
		ProcessHistory("USER","keysort","$1","$_");
	    }
	    next;
	}
	if (/^(\s*)password / && $filter_pwds >= 1) {
	    ProcessHistory("LINE-PASS","","","!$1password <removed>\n");
	    next;
	}
	if (/^\s*neighbor (\S*) password / && $filter_pwds >= 1) {
	    ProcessHistory("","","","! neighbor $1 password <removed>\n");
	    next;
	}
	if (/^(ppp .* password) 7 .*/ && $filter_pwds >= 1) {
	    ProcessHistory("","","","!$1 <removed>\n"); next;
	}
	if (/^(ip ftp password) / && $filter_pwds >= 1) {
	    ProcessHistory("","","","!$1 <removed>\n"); next;
	}
	if (/^( ip ospf authentication-key) / && $filter_pwds >= 1) {
	    ProcessHistory("","","","!$1 <removed>\n"); next;
	}
	# isis passwords appear to be completely plain-text
	if (/^\s+isis password (\S+)( .*)?/ && $filter_pwds >= 1) {
	    ProcessHistory("","","","!isis password <removed>$2\n"); next;
	}
	if (/^\s+(domain-password|area-password) (\S+)( .*)?/
							&& $filter_pwds >= 1) {
	    ProcessHistory("","","","!$1 <removed>$2\n"); next;
	}
	# this is reversable, despite 'md5' in the cmd
	if (/^( ip ospf message-digest-key \d+ md5) / && $filter_pwds >= 1) {
	    ProcessHistory("","","","!$1 <removed>\n"); next;
	}
	if (/^((crypto )?isakmp key) \S+ / && $filter_pwds >= 1) {
	    ProcessHistory("","","","!$1 <removed> $'"); next;
	}
	# i am told these are plain-text on the PIX
	if (/^(vpdn username \S+ password)/ && $filter_pwds >= 1) {
	    ProcessHistory("","","","!$1 <removed>\n"); next;
	}
	/fair-queue individual-limit/ && next;
	# sort ip explicit-paths.
	if (/^ip explicit-path name (\S+)/) {
	    my($key) = $1;
	    my($expath) = $_;
	    while (<INPUT>) {
		tr/\015//d;
		last if (/^$prompt/);
		last if (/^$prompt/ || ! /^(ip explicit-path name |[ !])/);
		if (/^ip explicit-path name (\S+)/) {
		    ProcessHistory("EXPATH","keysort","$key","$expath");
		    $key = $1;
		    $expath = $_;
		} else  {
		    $expath .= $_;
		}
	    }
	    ProcessHistory("EXPATH","keysort","$key","$expath");
	}
	# sort route-maps
	if (/^route-map (\S+)/) {
	    my($key) = $1;
	    my($routemap) = $_;
	    while (<INPUT>) {
		tr/\015//d;
		last if (/^$prompt/ || ! /^(route-map |[ !])/);
		if (/^route-map (\S+)/) {
		    ProcessHistory("ROUTEMAP","keysort","$key","$routemap");
		    $key = $1;
		    $routemap = $_;
		} else  {
		    $routemap .= $_;
		}
	    }
	    ProcessHistory("ROUTEMAP","keysort","$key","$routemap");
	}
	# filter out any RCS/CVS tags to avoid confusing local CVS storage
	s/\$(Revision|Id):/ $1:/;
	# order access-lists
	/^access-list\s+(\d\d?)\s+(\S+)\s+(\S+)/ &&
	    ProcessHistory("ACL $1 $2","ipsort","$3","$_") && next;
	# order extended access-lists
	/^access-list\s+(\d\d\d)\s+(\S+)\s+ip\s+host\s+(\S+)/ &&
	    ProcessHistory("EACL $1 $2","ipsort","$3","$_") && next;
	/^access-list\s+(\d\d\d)\s+(\S+)\s+ip\s+(\d\S+)/ &&
	    ProcessHistory("EACL $1 $2","ipsort","$3","$_") && next;
	/^access-list\s+(\d\d\d)\s+(\S+)\s+ip\s+any/ &&
	    ProcessHistory("EACL $1 $2","ipsort","0.0.0.0","$_") && next;
	# order arp lists
	/^arp\s+(\d+\.\d+\.\d+\.\d+)\s+/ &&
	    ProcessHistory("ARP","ipsort","$1","$_") && next;
	/^ip prefix-list\s+(\S+)\s+seq\s+(\d+)\s+(permit|deny)\s+(\d\S+)(\/.*)$/ &&
	    ProcessHistory("PACL $1 $3","ipsort","$4","ip prefix-list $1 $3 $4$5\n")
	    && next;
	# order logging statements
	/^logging (\d+\.\d+\.\d+\.\d+)/ &&
	    ProcessHistory("LOGGING","ipsort","$1","$_") && next;
	# order/prune snmp-server host statements
	# we only prune lines of the form
	# snmp-server host a.b.c.d <community>
	if (/^snmp-server host (\d+\.\d+\.\d+\.\d+) /) {
	    if (defined($ENV{'NOCOMMSTR'})) {
		my($ip) = $1;
		my($line) = "snmp-server host $ip";
		my(@tokens) = split(' ', $');
		my($token);
		while ($token = shift(@tokens)) {
		    if ($token eq 'version') {
			$line .= " " . join(' ', ($token, shift(@tokens)));
		    } elsif ($token =~ /^(informs?|traps?|(no)?auth)$/) {
			$line .= " " . $token;
		    } else {
			$line = "!$line " . join(' ', ("<removed>", join(' ',@tokens)));
			last;
		    }
		}
		ProcessHistory("SNMPSERVERHOST","ipsort","$ip","$line\n");
	    } else {
		ProcessHistory("SNMPSERVERHOST","ipsort","$1","$_");
	    }
	    next;
	}
	if (/^(snmp-server community) (\S+)/) {
	    if (defined($ENV{'NOCOMMSTR'})) {
		ProcessHistory("SNMPSERVERCOMM","keysort","$_","!$1 <removed>$'") && next;
	    } else {
		ProcessHistory("SNMPSERVERCOMM","keysort","$_","$_") && next;
	    }
	}
	# order/prune tacacs/radius server statements
	if (/^(tacacs-server|radius-server) key / && $filter_pwds >= 1) {
	    ProcessHistory("","","","!$1 key <removed>\n"); next;
	}
	# order clns host statements
	/^clns host \S+ (\S+)/ &&
	    ProcessHistory("CLNS","keysort","$1","$_") && next;
	# order alias statements
	/^alias / && ProcessHistory("ALIAS","keysort","$_","$_") && next;
	# delete ntp auth password - this md5 is a reversable too
	if (/^(ntp authentication-key \d+ md5) / && $filter_pwds >= 1) {
	    ProcessHistory("","","","!$1 <removed>\n"); next;
	}
	# order ntp peers/servers
	if (/^ntp (server|peer) (\d+)\.(\d+)\.(\d+)\.(\d+)/) {
	    $sortkey = sprintf("$1 %03d%03d%03d%03d",$2,$3,$4,$5);
	    ProcessHistory("NTP","keysort",$sortkey,"$_");
	    next;
	}
	# order ip host line statements
	/^ip host line(\d+)/ &&
	    ProcessHistory("IPHOST","numsort","$1","$_") && next;
	# order ip nat source static statements
	/^ip nat (\S+) source static (\S+)/ &&
	    ProcessHistory("IP NAT $1","ipsort","$2","$_") && next;
	# order atm map-list statements
	/^\s+ip\s+(\d+\.\d+\.\d+\.\d+)\s+atm-vc/ &&
	    ProcessHistory("ATM map-list","ipsort","$1","$_") && next;
	# order ip rcmd lines
	/^ip rcmd/ && ProcessHistory("RCMD","keysort","$_","$_") && next;

	# system controller
	/^syscon address (\S*) (\S*)/ &&
	    ProcessHistory("","","","!syscon address $1 <removed>\n") &&
	    next;
	if (/^syscon password (\S*)/ && $filter_pwds >= 1) {
	    ProcessHistory("","","","!syscon password <removed>\n");
	    next;
	}

	# catch anything that wasnt matched above.
	ProcessHistory("","","","$_");
    }
    return(0);
}

# dummy function
sub DoNothing {print STDOUT;}

# Main
@commandtable = (
	{'term length 65535'		=> 'TermLength'},
	{'copy profile user-profile'	=> 'CopyProfile'},
	{'show version'			=> 'ShowVersion'},
	{'show boot'			=> 'ShowBoot'},
	{'show run'			=> 'ShowRun'}
);
# Use an array to preserve the order of the commands and a hash for mapping
# commands to the subroutine and track commands that have been completed.
@commands = map(keys(%$_), @commandtable);
%commands = map(%$_, @commandtable);

$cisco_cmds=join(";",@commands);
$cmds_regexp=join("|",@commands);

if (length($host) == 0) {
    if ($file) {
	print(STDERR "Too few arguments: file name required\n");
	exit(1);
    } else {
	print(STDERR "Too few arguments: host name required\n");
	exit(1);
    }
}
open(OUTPUT,">$host.new") || die "Can't open $host.new for writing: $!\n";
select(OUTPUT);
# make OUTPUT unbuffered if debugging
if ($debug) { $| = 1; }

if ($file) {
    print STDERR "opening file $host\n" if ($debug);
    print STDOUT "opening file $host\n" if ($log);
    open(INPUT,"<$host") || die "open failed for $host: $!\n";
} else {
    print STDERR "executing clogin -t $timeo -c\"$cisco_cmds\" $host\n" if ($debug);
    print STDOUT "executing clogin -t $timeo -c\"$cisco_cmds\" $host\n" if ($log);
    if (defined($ENV{NOPIPE})) {
	system "clogin -t $timeo -c \"$cisco_cmds\" $host </dev/null > $host.raw 2>&1" || die "clogin failed for $host: $!\n";
	open(INPUT, "< $host.raw") || die "clogin failed for $host: $!\n";
    } else {
	open(INPUT,"clogin -t $timeo -c \"$cisco_cmds\" $host </dev/null |") || die "clogin failed for $host: $!\n";
    }
}

# determine password filtering mode
if ($ENV{"FILTER_PWDS"} =~ /no/i) {
	$filter_pwds = 0;
} elsif ($ENV{"FILTER_PWDS"} =~ /all/i) {
	$filter_pwds = 2;
} else {
	$filter_pwds = 1;
}

ProcessHistory("","","","!RANCID-CONTENT-TYPE: cisco-css\n!\n");
#ProcessHistory("COMMENTS","keysort","B0","!\n");
#ProcessHistory("COMMENTS","keysort","F0","!\n");
#ProcessHistory("COMMENTS","keysort","G0","!\n");

TOP: while(<INPUT>) {
NEXT:
    tr/\015//d;
    if (/\#\s?exit/) {
	$clean_run=1;
	last;
    }
    if (/^Error:/) {
	print STDOUT ("$host clogin error: $_");
	print STDERR ("$host clogin error: $_") if ($debug);
	$clean_run=0;
	last;
    }
    if (/#\s*($cmds_regexp)\s*$/) {
	$cmd = $1;
	if (!defined($prompt)) {
	    $prompt = ($_ =~ /^([^#]+#)/)[0];
	    $prompt =~ s/([][}{)(\\])/\\$1/g;
	    print STDERR ("PROMPT MATCH: $prompt\n") if ($debug);
	}
	print STDERR ("HIT COMMAND:$_") if ($debug);
	if (! defined($commands{$cmd})) {
	    print STDERR "$host: found unexpected command - \"$cmd\"\n";
	    $clean_run = 0;
	    last TOP;
	}
	$rval = &{$commands{$cmd}};
	delete($commands{$cmd});
	if ($rval == -1) {
	    $clean_run = 0;
	    last TOP;
	}
	# the function may have read the next prompt/cmd line
	goto NEXT;
    }
}
print STDOUT "Done $logincmd: $_\n" if ($log);
# Flush History
ProcessHistory("","","","");
# Cleanup
close(INPUT);
close(OUTPUT);

if (defined($ENV{NOPIPE})) {
    unlink("$host.raw") if (! $debug);
}

# check for completeness
if (scalar(%commands) || !$clean_run || !$found_end) {
    if (scalar(%commands)) {
	printf(STDOUT "$host: missed cmd(s): %s\n", join(',', keys(%commands)));
	printf(STDERR "$host: missed cmd(s): %s\n", join(',', keys(%commands))) if ($debug);
    }
    if (!$clean_run || !$found_end) {
	print STDOUT "$host: End of run not found\n";
	print STDERR "$host: End of run not found\n" if ($debug);
	system("/usr/bin/tail -1 $host.new");
    }
    unlink "$host.new" if (! $debug);
}