#! @PERLV_PATH@
##
## $Id: cat5rancid.in,v 1.44 2005/08/14 01:04:07 heas Exp $
##
## Copyright (C) 1997-2004 by Terrapin Communications, Inc.
## All rights reserved.
##
## This software may be freely copied, modified and redistributed
## without fee for non-commerical purposes provided that this license
## remains intact and unmodified with any RANCID distribution.
##
## There is no warranty or other guarantee of fitness of this software.
## It is provided solely "as is". The author(s) disclaim(s) all
## responsibility and liability with respect to this software's usage
## or its effect upon hardware, computer systems, other software, or
## anything else.
##
## Except where noted otherwise, rancid was written by and is maintained by
## Henry Kilmer, John Heasley, Andrew Partan, Pete Whiting, and Austin Schutz.
##
#
# RANCID - Really Awesome New Cisco confIg Differ
#
# usage: rancid [-d] [-l] [-f filename | $host]
#
use Getopt::Std;
getopts('dfl');
$log = $opt_l;
$debug = $opt_d;
$file = $opt_f;
$host = $ARGV[0];
$clean_run = 0;
$found_end = 0;
$timeo = 90; # clogin timeout in seconds
my(@commandtable, %commands, @commands);# command lists
my(%filter_pwds); # password filtering mode
my(%modules); # module info (part from sh ver, part from sh module)
# This routine is used to print out the router configuration
sub ProcessHistory {
my($new_hist_tag,$new_command,$command_string,@string) = (@_);
if ((($new_hist_tag ne $hist_tag) || ($new_command ne $command))
&& defined %history) {
print eval "$command \%history";
undef %history;
}
if (($new_hist_tag) && ($new_command) && ($command_string)) {
if ($history{$command_string}) {
$history{$command_string} = "$history{$command_string}@string";
} else {
$history{$command_string} = "@string";
}
} elsif (($new_hist_tag) && ($new_command)) {
$history{++$#history} = "@string";
} else {
print "@string";
}
$hist_tag = $new_hist_tag;
$command = $new_command;
1;
}
sub numerically { $a <=> $b; }
# This is a sort routine that will sort numerically on the
# keys of a hash as if it were a normal array.
sub keynsort {
local(%lines) = @_;
local($i) = 0;
local(@sorted_lines);
foreach $key (sort numerically keys(%lines)) {
$sorted_lines[$i] = $lines{$key};
$i++;
}
@sorted_lines;
}
# This is a sort routine that will sort on the
# keys of a hash as if it were a normal array.
sub keysort {
local(%lines) = @_;
local($i) = 0;
local(@sorted_lines);
foreach $key (sort keys(%lines)) {
$sorted_lines[$i] = $lines{$key};
$i++;
}
@sorted_lines;
}
# This is a sort routine that will sort on the
# values of a hash as if it were a normal array.
sub valsort{
local(%lines) = @_;
local($i) = 0;
local(@sorted_lines);
foreach $key (sort values %lines) {
$sorted_lines[$i] = $key;
$i++;
}
@sorted_lines;
}
# This is a numerical sort routine (ascending).
sub numsort {
local(%lines) = @_;
local($i) = 0;
local(@sorted_lines);
foreach $num (sort {$a <=> $b} keys %lines) {
$sorted_lines[$i] = $lines{$num};
$i++;
}
@sorted_lines;
}
# This is a sort routine that will sort on the
# ip address when the ip address is anywhere in
# the strings.
sub ipsort {
local(%lines) = @_;
local($i) = 0;
local(@sorted_lines);
foreach $addr (sort sortbyipaddr keys %lines) {
$sorted_lines[$i] = $lines{$addr};
$i++;
}
@sorted_lines;
}
# These two routines will sort based upon IP addresses
sub ipaddrval {
my(@a) = ($_[0] =~ m#^(\d+)\.(\d+)\.(\d+)\.(\d+)$#);
$a[3] + 256 * ($a[2] + 256 * ($a[1] +256 * $a[0]));
}
sub sortbyipaddr {
&ipaddrval($a) <=> &ipaddrval($b);
}
# This routine parses "show version"
sub ShowVersion {
print STDERR " In ShowVersion: $_" if ($debug);
while () {
tr/\015//d;
last if(/^$prompt/);
next if(/^(\s*|\s*$cmd\s*)$/);
/^(\S+) Software, Version\s+(.*)$/ &&
ProcessHistory("COMMENTS","keysort","F1",
"!Image: Software: $2\n") && next;
/^(\S+) S\/W compiled on (.*)$/ &&
ProcessHistory("COMMENTS","keysort","F3",
"!Image: Compiled: $1 on $2\n") && next;
/^System Bootstrap (Version.*)$/ &&
ProcessHistory("COMMENTS","keysort","G1",
"!Bootstrap: $1\n") && next;
if (/^Hardware Version: (\S+) Model: (\S+) Serial #: (\S+)/) {
my($proc) = $2;
# Really should figure out types of switches here.
$type = $2;
ProcessHistory("COMMENTS","keysort","A1",
"!Chassis type: $proc - a $type switch\n");
ProcessHistory("COMMENTS","keysort","C1", "!Serial Number: $3\n");
ProcessHistory("COMMENTS","keysort","C2", "!Hardware Version: $1\n");
next;
}
# stuff module h/w, s/w, ports, etc into %module
if (/^Mod\s+Port\s+Model/) {
;
my($slot);
while () {
tr/\015//d;
last if (/^\s*$/);
if (/^(\d+)\s+(\d+)\s+(\S+)\s+(\S+)\s+(\S+)\s?:\s+(\S+)/) {
$slot = $1;
$modules{$slot}->{ports} = $2;
$modules{$slot}->{model} = $3;
$modules{$slot}->{serial} = $4;
$modules{$slot}->{$5} = $6; # revision info
}
/^\s+(\S+)\s?:\s+(\S+)/ &&
($modules{$slot}->{$1} = $2);
}
next;
}
# stuff module h/w, s/w, ports, etc into %module - yet another format
if (/^Module\s+Ports\s+Model/) {
;
my($slot);
while () {
tr/\015//d;
last if (/^\s*$/);
if (/^(\d+)\s+(\d+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+\s+)?(\S+)\s*$/) {
$slot = $1;
$modules{$slot}->{ports} = $2;
$modules{$slot}->{model} = $3;
$modules{$slot}->{serial} = $4;
$modules{$slot}->{Hw} = $5;
$modules{$slot}->{Fw} = $6;
$modules{$slot}->{Sw} = $8;
$modules{$slot}->{Fw1} = $7;
$modules{$slot}->{Fw1} =~ s/\s*$//;
if ($modules{$slot}->{Fw1} =~ /^$/) {delete($modules{$slot}->{Fw1});}
}
}
next;
}
if (/^ DRAM/) {
# Eat 2 lines & then get the total dram, flash, & nvram.
$_ = ; $_ = ;
$_ = ; tr/\015//d;
/\S+\s+(\S+)\s+\S+\s+\S+\s+(\S+)\s+\S+\s+\S+\s+(\S+)/ &&
ProcessHistory("COMMENTS","keysort","B1",
"!Memory: dram $1\n") &&
ProcessHistory("COMMENTS","keysort","B5",
"!Memory: flash $2\n") &&
ProcessHistory("COMMENTS","keysort","B2",
"!Memory: nvram $3\n");
next;
}
if (/^Module DRAM/) {
# Eat a line & then get the total dram, flash, & nvram.
$_ = ;
$_ = ; tr/\015//d;
/\S+\s+(\S+)\s+(\S+)\s+(\S+)/ &&
ProcessHistory("COMMENTS","keysort","B1",
"!Memory: dram $1\n") &&
ProcessHistory("COMMENTS","keysort","B5",
"!Memory: flash $2\n") &&
ProcessHistory("COMMENTS","keysort","B2",
"!Memory: nvram $3\n");
next;
}
}
return(0);
}
# This routine parses "show install active"
sub ShowInstallActive {
print STDERR " In ShowInstallActive: $_" if ($debug);
while () {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if /^\s*\^\s*$/;
return(1) if /Invalid input detected/;
return(1) if /Unknown command/;
ProcessHistory("COMMENTS","keysort","F5","!Image: $_") && next;
}
return(0);
}
# This routine parses "show env all"
sub ShowEnv {
# Skip if this is not a 7500, 7200, or 7000.
print STDERR " In ShowEnv: $_" if ($debug);
while () {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if ($type !~ /^7/);
if (!defined($E0)) {
$E0=1;
ProcessHistory("COMMENTS","keysort","E0","!\n");
}
if (/^Arbiter type (\d), backplane type (\S+)/) {
if (!defined($C0)) {
$C0=1; ProcessHistory("COMMENTS","keysort","C0","!\n");
}
ProcessHistory("COMMENTS","keysort","C1",
"!Enviromental Arbiter Type: $1\n");
ProcessHistory("COMMENTS","keysort","A2",
"!Chassis type: $2 backplane\n");
next;
}
/^\s*(Power .*)/ &&
ProcessHistory("COMMENTS","keysort","E1","!Power: $1\n") && next;
/^\s*(Lower Power .*)/i &&
ProcessHistory("COMMENTS","keysort","E2","!Power: $1\n") && next;
}
ProcessHistory("COMMENTS","","","!\n");
return(0);
}
# This routine parses "show gsr chassis-info" for the gsr
# This will create arrarys for hw info.
sub ShowGSR {
# Skip if this is not a 1200n.
print STDERR " In ShowGSR: $_" if ($debug);
while () {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if ($type !~ /^120/);
/^$/ && next;
/^\s+Chassis: type (\S+) Fab Ver: (\S+)/ &&
ProcessHistory("COMMENTS","keysort","D0","!\n") &&
ProcessHistory("COMMENTS","keysort","D1",
"!GSR Chassis type: $1 Fab Ver: $2\n") &&
next;
/^\s+Chassis S\/N: (.*)$/ &&
ProcessHistory("COMMENTS","keysort","D2",
"!GSR Chassis S/N: $1\n") &&
next;
/^\s+PCA: (\S+)\s*rev: (\S+)\s*dev: \S+\s*HW ver: (\S+)$/ &&
ProcessHistory("COMMENTS","keysort","D3",
"!GSR Backplane PCA: $1, rev $2, ver $3\n") &&
next;
/^\s+Backplane S\/N: (\S+)$/ &&
ProcessHistory("COMMENTS","keysort","D4",
"!GSR Backplane S/N: $1\n") &&
next;
}
ProcessHistory("COMMENTS","","","!\n");
return(0);
}
# This routine parses "show boot"
sub ShowBoot {
print STDERR " In ShowBoot: $_" if ($debug);
while () {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if /^\s*\^\s*$/;
return(1) if /Ambiguous command/i;
return(1) if /Invalid input detected/;
return(1) if /Unknown command/;
return(1) if /(Open device \S+ failed|Error opening \S+:)/;
next if /CONFGEN variable/;
if (!defined($H0)) {
$H0=1; ProcessHistory("COMMENTS","keysort","H0","!\n");
}
/^(\S+) variable (.*)$/ &&
ProcessHistory("COMMENTS","keysort","H1","!Variable: $1 $2\n") &&
next;
if (/^Configuration register is (.*)$/) {
$config_register=$1;
next;
}
}
ProcessHistory("COMMENTS","","","!\n");
return(0);
}
# This routine parses "show flash"
sub ShowFlash {
# skip if this is 7000, 7200, 7500, or 12000.
print STDERR " In ShowFlash: $_" if ($debug);
while () {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if ($type =~ /^(120|7)/);
return(1) if /^\s*\^\s*$/;
return(1) if /Invalid input detected/;
return(-1) if /session in progress. Try again later/; # Flash is busy
ProcessHistory("FLASH","","","!Flash: $_");
}
ProcessHistory("","","","!\n");
return;
}
# This routine parses "dir /all ((disk|slot)N|bootflash):"
sub DirSlotN {
# Skip if this is not a 3600, 7000, 7200, 7500, or 12000.
print STDERR " In DirSlotN: $_" if ($debug);
my($dev) = (/\s([^\s]+):/);
while () {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if ($type !~ /^(120|7|36)/);
return(1) if /^\s*\^\s*$/;
return(1) if /Invalid input detected/;
return(1) if /\%Error: No such file or directory/;
return(1) if /No space information available/;
return(-1) if /\%Error calling/;
return(-1) if /: device being squeezed/; # Flash is busy
return(1) if /(Open device \S+ failed|Error opening \S+:)/;
ProcessHistory("FLASH","","","!Flash: $dev: $_");
}
ProcessHistory("","","","!\n");
return(0);
}
# This routine parses "show controllers"
sub ShowContAll {
# Skip if this is a 70[01]0, 7500, or 12000.
print STDERR " In ShowContAll: $_" if ($debug);
while () {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if ($type =~ /^(120|7[05])/);
if (/^Interface ([^ \n(]*)/) { $INT = "$1, "; next; }
/^(BRI unit \d)/ &&
ProcessHistory("INT","","","!Interface: $1\n") && next;
/^LANCE unit \d, NIM/ &&
ProcessHistory("INT","","","!Interface: $_") && next;
/^(LANCE unit \d)/ &&
ProcessHistory("INT","","","!Interface: $1\n") && next;
/(Media Type is \S+),/ &&
ProcessHistory("INT","","","!\t$1\n");
if (/(M\dT:) show controller:$/) {
my($ctlr) = $1;
$_ = ; tr/\015//d; s/ subunit \d,//;
ProcessHistory("INT","","","!Interface: $ctlr $_");
}
if (/^(\S+) : show controller:$/) {
my($ctlr) = $1;
$_ = ; tr/\015//d; s/ subunit \d,//;
ProcessHistory("INT","","","!Interface: $ctlr: $_");
}
/^(HD unit \d), idb/ &&
ProcessHistory("INT","","","!Interface: $1\n") && next;
/^HD unit \d, NIM/ &&
ProcessHistory("INT","","","!Interface: $_") && next;
/^buffer size \d+ HD unit \d, (.*)/ &&
ProcessHistory("INT","","","!\t$1\n") && next;
/^AM79970 / && ProcessHistory("INT","","","!Interface: $_") && next;
/^buffer size \d+ (Universal Serial: .*)/ &&
ProcessHistory("INT","","","!\t$1\n") && next;
/^Hardware is (.*)/ &&
ProcessHistory("INT","","","!Interface: $INT$1\n") && next;
/^(QUICC Serial unit \d),/ &&
ProcessHistory("INT","","","!$1\n") && next;
/^QUICC Ethernet .*/ &&
ProcessHistory("INT","","","!$_") && next;
/^DTE .*\.$/ &&
ProcessHistory("INT","","","!\t$_") && next;
/^(cable type :.*),/ &&
ProcessHistory("INT","","","!\t$1\n") && next;
/^(.* cable.*), received clockrate \d+$/ &&
ProcessHistory("INT","","","!\t$1\n") && next;
/^.* cable.*$/ &&
ProcessHistory("INT","","","!\t$_") && next;
}
return(0);
}
# This routine parses "show controllers cbus"
# Some of this is printed out in ShowDiagbus.
sub ShowContCbus {
# Skip if this is not a 7000 or 7500.
print STDERR " In ShowContCbus: $_" if ($debug);
while () {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if ($type !~ /^7[05]0/);
if (/^\s*slot(\d+): ([^,]+), hw (\S+), sw (\S+), ccb/) {
$slot = $1;
$board{$slot} = $2;
$hwver{$slot} = $3;
$hwucode{$slot} = $4;
} elsif (/^\s*(\S+) (\d+), hardware version (\S+), microcode version (\S+)/) {
$slot = $2;
$board{$slot} = $1;
$hwver{$slot} = $3;
$hwucode{$slot} = $4;
} elsif (/(Microcode .*)/) {
$ucode{$slot} = $1;
} elsif (/(software loaded .*)/) {
$ucode{$slot} = $1;
} elsif (/(\d+) Kbytes of main memory, (\d+) Kbytes cache memory/) {
$hwmemd{$slot} = $1;
$hwmemc{$slot} = $2;
} elsif (/byte buffers/) {
chop;
s/^\s*//;
$hwbuf{$slot} = $_;
} elsif (/Interface (\d+) - (\S+ \S+),/) {
$interface = $1;
ProcessHistory("HW","","",
"!\n!Int $interface: in slot $slot, named $2\n"); next;
} elsif (/(\d+) buffer RX queue threshold, (\d+) buffer TX queue limit, buffer size (\d+)/) {
ProcessHistory("HW","","","!Int $interface: rxq $1, txq $2, bufsize $3\n");
next;
}
}
return(0);
}
# This routine parses "show diagbus"
# This will create arrarys for hw info.
sub ShowDiagbus {
# Skip if this is not a 7000, 70[01]0, or 7500.
print STDERR " In ShowDiagbus: $_" if ($debug);
while () {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if ($type !~ /^7[05]/);
if (/^\s*Slot (\d+):/i) {
$slot = $1;
next;
} elsif (/^\s*Slot (\d+) \(virtual\):/i) {
$slot = $1;
next;
} elsif (/^\s*(.*Processor.*|.*controller|.*Chassis Interface), HW rev (\S+), board revision (\S+)/i) {
$board = $1;
$hwver = $2;
$boardrev = $3;
if ($board =~ /Processor/) {
if ($board =~ /7000 Route\/Switch/) {
$board = "RSP7000";
} elsif ($board =~ /Route\/Switch Processor (\d)/) {
$board = "RSP$1";
} elsif ($board =~ /Route/) {
$board = "RP";
} elsif ($board =~ /Silicon Switch/) {
$board = "SSP";
} elsif ($board =~ /Switch/) {
$board = "SP";
$board = "SSP $sspmem" if $ssp;
} elsif ($board =~ /ATM/) {
$board = "AIP";
}
} elsif ($board =~ /(.*) controller/i) {
$board = $1;
}
# hwucode{$slot} defined in ShowContCbus
if (defined $hwucode{$slot}) {
ProcessHistory("SLOT","","","!\n!Slot $slot/$board: hvers $hwver rev $boardrev ucode $hwucode{$slot}\n");
} else {
ProcessHistory("SLOT","","","!\n!Slot $slot/$board: hvers $hwver rev $boardrev\n");
}
# These are also from the ShowContCbus
ProcessHistory("SLOT","","","!Slot $slot/$board: $ucode{$slot}\n") if (defined $ucode{$slot});
ProcessHistory("SLOT","","","!Slot $slot/$board: memd $hwmemd{$slot}, cache $hwmemc{$slot}\n")
if ((defined $hwmemd{$slot}) && (defined $hwmemc{$slot}));
ProcessHistory("SLOT","","","!Slot $slot/$board: $hwbuf{$slot}\n") if (defined $hwbuf{$slot});
next;
}
/Serial number: (\S+)\s*Part number: (\S+)/ &&
ProcessHistory("SLOT","","",
"!Slot $slot/$board: part $2, serial $1\n") &&
next;
/^\s*Controller Memory Size: (.*)$/ &&
ProcessHistory("SLOT","","","!Slot $slot/$board: $1\n") &&
next;
if (/PA Bay (\d) Information/) {
$pano = $1;
if ("PA" =~ /$board/) {
($s,$c) = split(/\//,$board);
$board = "$s/$c/PA $pano";
} else {
$board =~ s/\/PA \d//;
$board = "$board/PA $pano";
}
next;
}
/\s+(.*) PA, (\d) ports?, (\S+)/ &&
ProcessHistory("SLOT","","","!Slot $slot/$board: type $3, $2 ports\n") &&
next;
/\s+(.*) PA( \(\S+\))?, (\d) ports?/ &&
ProcessHistory("SLOT","","","!Slot $slot/$board: type $1$2, $3 ports\n") &&
next;
/^\s*HW rev (\S+), Board revision (\S+)/ &&
ProcessHistory("SLOT","","","!Slot $slot/$board: hvers $1 rev $2\n") &&
next;
/Serial number: (\S+)\s*Part number: (\S+)/ &&
ProcessHistory("SLOT","","","!Slot $slot/$board: part $2, serial $1\n") && next;
}
return(0);
}
# This routine parses "show diag" for the gsr, 7200, 3600, 2600.
# This will create arrarys for hw info.
sub ShowDiag {
# Skip if this is not a 12000.
print STDERR " In ShowDiag: $_" if ($debug);
while () {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if ($type !~ /^(120|720|36|26)/);
/^$/ && next;
if (!defined($showdiags)) {$showdiags=1; ProcessHistory("SLOT","","","!\n");}
s/Port Packet Over SONET/POS/;
if (/^\s*SLOT (\d+)\s+\(.*\): (.*)/) {
$slot = $1;
ProcessHistory("SLOT","","","!Slot $slot: $2\n");
$board = "RP" if (/Route Processor/);
$board = "CLK" if (/Clock Scheduler Card/);
next;
}
if (/^\s+PCA:\s+(.*)/){
local($part) = $1;
$_ = ;
/^\s+HW version (\S+)\s+S\/N (\S+)/ &&
ProcessHistory("SLOT","","","!Slot $slot/PCA: part $part, serial $2\n") &&
ProcessHistory("SLOT","","","!Slot $slot/PCA: hvers $1\n");
next;
}
if (/^\s+MBUS: .*\)\s+(.*)/) {
local($tmp) = "!Slot $slot/MBUS: part $1";
$_ = ;
/^\s+HW version (\S+)\s+S\/N (\S+)/ &&
ProcessHistory("SLOT","","","$tmp, serial $2\n") &&
ProcessHistory("SLOT","","","!Slot $slot/MBUS: hvers $1\n");
next;
}
if (/^\s+MBUS Agent Software version (.*)/) {
local($sw) = $1;
local($tail) = "!\n" if ($board =~ /(CLK|RP)/);
ProcessHistory("SLOT","","","!Slot $slot/MBUS: software $sw\n$tail");
next;
}
if (/^\s+DRAM size: (\d+)/) {
local($dram) = $1 / 1048576;
$_ = ;
/^\s+FrFab SDRAM size: (\d+)/ &&
ProcessHistory("SLOT","","","!Slot $slot/MBUS: $dram Mbytes DRAM, "
. $1 / 1024 . " Kbytes SDRAM\n!\n");
next;
}
# 7200 and 3600 stuff
if (/^(Slot)\s+(\d+):/ || /^\s+(WIC|VIC) Slot (\d):/) {
if ($1 eq "WIC") {
$WIC = "/$2";
} elsif ($1 eq "VIC") {
$WIC = "/$2";
} else {
$slot = $2;
undef($WIC);
}
$_ = ; tr/\015//d;
# clean up hideous 7200 format to look more like 7500 output
s/Fast-ethernet on C7200 I\/O card/FE-IO/;
s/ with MII or RJ45/-TX/;
s/Fast-ethernet /100Base/; s/[)(]//g;
/\s+(.*) port adapter,?\s+(\d+)\s+/i &&
ProcessHistory("SLOT","","","!Slot $slot: type $1, $2 ports\n");
# I/O controller with no interfaces
/\s+(.*)\s+port adapter\s*$/i &&
ProcessHistory("SLOT","","","!Slot $slot: type $1, 0 ports\n");
/\s+(.*)\s+daughter card(.*)$/ &&
ProcessHistory("SLOT","","","!Slot $slot$WIC: type $1$2\n");
/\s+(FT1)$/ &&
ProcessHistory("SLOT","","","!Slot $slot$WIC: type $1\n");
next;
}
/revision\s+(\S+).*revision\s+(\S+)/ &&
ProcessHistory("SLOT","","","!Slot $slot$WIC: hvers $1 rev $2\n") &&
next;
/number\s+(\S+)\s+Part number\s+(\S+)/ &&
ProcessHistory("SLOT","","","!Slot $slot$WIC: part $2, serial $1\n!\n") &&
next;
}
return(0);
}
# This routine parses "show inventory".
sub ShowInventory {
print STDERR " In ShowInventory: $_" if ($debug);
while () {
tr/\015//d;
return if (/^\s*\^$/);
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(-1) if (/command authorization failed/i);
# the pager can not be disabled per-session on the PIX
s/^<-+ More -+>\s*//;
chomp;
# split PID/VID line
if (/^(NAME: ".*,) (DESCR: .*)/) {
ProcessHistory("INVENTORY","","", sprintf("!%-30s%s\n", $1, $2));
next;
}
if (/^(PID: \w?) *, (VID: .*), (SN: .*)$/) {
ProcessHistory("INVENTORY","","", "!$1\n!$2\n!$3\n");
next;
}
ProcessHistory("INVENTORY","","","!$_");
}
ProcessHistory("INVENTORY","","","");
return(0);
}
# This routine parses "show module"
sub ShowModule {
my($slot);
print STDERR " In ShowModule: $_" if ($debug);
OUTER:while () {
tr/\015//d;
last if(/^$prompt/);
# stuff module type into %module
if (/^Mod\s+Slot\s+Ports/) {
;
while () {
tr/\015//d;
last if (/^\s*$/);
last OUTER if (/^$prompt/);
if (/^Module .*mismatch/) {
ProcessHistory("MODWARN","","","!\n! WARNING: $_");
while () {
tr/\015//d;
last OUTER if (/^\s*$/);
last if (/^\d/);
ProcessHistory("MODWARN","","","! $_");
}
}
if (/^(\d+)\s+\d+\s+\d+\s+(.*)\s+\S+\s+\S+\s*$/) {
$modules{$1}->{type} = $2;
$modules{$1}->{type} =~ s/\s{2,}.*$//;
}
}
next;
}
# one does it one way... pita
if (/^Mod\s+Module-Name\s+Ports/) {
;
#my($slot);
while () {
tr/\015//d;
last if (/^\s*$/);
last OUTER if (/^$prompt/);
if (/^(\d+)\s+(.+\s+)?\d+\s+(.*)\s+\S+\s+(\S+)\s+\S+\s*$/) {
$modules{$1}->{serial} = $4;
$modules{$1}->{type} = $3;
#$modules{$1}->{type} =~ s/\s{2,}.*$//;
$modules{$1}->{type} =~ s/\s*$//;
}
}
next;
}
# daughter boards
if (/^Mod\s+Sub-Type/) {
;
my($slot, $board);
while () {
tr/\015//d;
last if (/^\s*$/);
last OUTER if (/^$prompt/);
if (/^(\d+)\s+(\S+.*\s+)?(\S+)\s+(\S+)\s+(\S+)\s*$/) {
$board = 0 if ($slot != $1);
$slot = $1;
$modules{$1}->{daughter}->{$board}->{model} = $3;
$modules{$1}->{daughter}->{$board}->{serial} = $4;
$modules{$1}->{daughter}->{$board}->{Hw} = $5;
$modules{$1}->{daughter}->{$board}->{type} = $2;
$modules{$1}->{daughter}->{$board}->{type} =~ s/\s*$//;
$board++;
}
}
next;
}
}
# dump the module info
foreach $slot (sort numerically keys(%modules)) {
my($dboards);
ProcessHistory("MODS","","","!\n");
ProcessHistory("MODS","","",sprintf("!Slot $slot: type %s, %d ports\n", $modules{$slot}->{type}, $modules{$slot}->{ports}));
delete($modules{$slot}->{ports});
delete($modules{$slot}->{type});
my($model) = sprintf("!Slot $slot: part %s, serial %s\n", $modules{$slot}->{model}, $modules{$slot}->{serial});
delete($modules{$slot}->{model});
delete($modules{$slot}->{serial});
# deal with daughter boards before slot versions
if (defined($modules{$slot}->{daughter})) {
my($board);
foreach $board (sort numerically keys(%{$modules{$slot}->{daughter}})) {
$dboards .= sprintf("!Slot $slot/$board: type %s\n", $modules{$slot}->{daughter}->{$board}->{type});
$dboards .= sprintf("!Slot $slot/$board: hvers %s\n", $modules{$slot}->{daughter}->{$board}->{Hw});
$dboards .= sprintf("!Slot $slot/$board: part %s, serial %s\n", $modules{$slot}->{daughter}->{$board}->{model}, $modules{$slot}->{daughter}->{$board}->{serial});
}
delete($modules{$slot}->{daughter});
}
my($ver); my($i) = 0;
ProcessHistory("MODS","","","!Slot $slot:");
foreach $ver (sort keys(%{$modules{$slot}})) {
if ($i) {ProcessHistory("MODS","","",",");}
ProcessHistory("MODS","","",sprintf(" %s: %s", $ver, $modules{$slot}->{$ver}));
$i++;
}
ProcessHistory("MODS","","","\n");
ProcessHistory("MODS","","",$model);
if ($dboards) {ProcessHistory("MODS","","",$dboards);}
}
}
# This routine processes a "show port ifindex"
sub ShowPortIfindex {
print STDERR " In ShowPortIfindex: $_" if ($debug);
ProcessHistory("","","","!\n");
while () {
tr/\015//d;
last if(/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if /^\s*\^\s*$/;
return(1) if /Invalid input detected/;
return(1) if /Unknown command/;
return(1) if /Usage: /;
ProcessHistory("","","","! $_");
}
}
# This routine processes a "write term {all}"
sub WriteTerm {
print STDERR " In WriteTerm: $_" if ($debug);
if (! $found_end) {
ProcessHistory("","","","!\n");
}
while () {
tr/\015//d;
last if (/^$prompt/);
last if (/^Unknown host /); # error when write term all
# is not supported
next if (/^\.+$/ | /^$/);
return(0) if ($found_end);
/Non-Volatile memory is in use/ && return(-1); # NvRAM is locked
# skip the crap
next if (/^This command shows non-default configurations only./i);
next if (/^Use 'write terminal all' to show both default and non/i);
if (/^(\.\.+$|##+$|(Building|Current) configuration)/i) {
while () {
tr/\015//d;
next if (/^Current configuration:/i);
next if (/^(\.+|[%!].*|\s*)$/);
next if (/^ip add.*ipv4:/); # band-aid for 3620 12.0S
last;
}
ProcessHistory("","","","!\n");
if (defined($config_register)) {
ProcessHistory("","","","config-register $config_register\n");
}
tr/\015//d;
}
# some versions have other crap mixed in with the bits in the
# block above
/^! (Last configuration|NVRAM config last)/ && next;
/^#Time: / && next;
# Dog gone Cool matches to process the rest of the config
/^#time: / && next; # kill time:
/^tftp-server flash / && next; # kill any tftp remains
/^ntp clock-period / && next; # kill ntp clock-period
/^ length / && next; # kill length on serial lines
/^ width / && next; # kill width on serial lines
if (/^enable password / && $filter_pwds >= 1) {
ProcessHistory("ENABLE","","","! $1 \n");
next;
}
if (/^set enablepass / && $filter_pwds >= 2) {
ProcessHistory("ENABLE","","","! $1 \n");
next;
}
if (/^(username .*) password /) {
if (/^(username .*) password / && $filter_pwds >= 1) {
ProcessHistory("USER","","","! $1 password \n");
} else {
ProcessHistory("USER","","","$_\n");
}
next;
}
if (/^set password / && $filter_pwds >= 2) {
ProcessHistory("","","","! set password \n");
next;
}
if (/^(\s*)password / && $filter_pwds >= 1) {
ProcessHistory("LINE-PASS","","","!$1password \n");
next;
}
if (/^\s*neighbor (\S*) password / && $filter_pwds >= 1) {
ProcessHistory("","","","! neighbor $1 password \n");
next;
}
if (/^(ip ftp password) / && $filter_pwds >= 1) {
ProcessHistory("","","","!$1 \n");
next;
}
if (/^( ip ospf authentication-key) / && $filter_pwds >= 1) {
ProcessHistory("","","","!$1 \n");
next;
}
if (/^( ip ospf message-digest-key \d+ md5) / && $filter_pwds >= 1) {
ProcessHistory("","","","!$1 \n");
next;
}
/fair-queue individual-limit/ && next;
/^set port security \d+\/\d+ \S+-\S+\-/ && next;
# sort ip explicit-paths.
if (/^ip explicit-path name (\S+)/) {
my($key) = $1;
my($expath) = $_;
while () {
tr/\015//d;
last if (/^$prompt/);
last if (/^$prompt/ || ! /^(ip explicit-path name |[ !])/);
if (/^ip explicit-path name (\S+)/) {
ProcessHistory("EXPATH","keysort","$key","$expath");
$key = $1;
$expath = $_;
} else {
$expath .= $_;
}
}
ProcessHistory("EXPATH","keysort","$key","$expath");
}
# sort route-maps
if (/^route-map (\S+)/) {
my($key) = $1;
my($routemap) = $_;
while () {
tr/\015//d;
last if (/^$prompt/ || ! /^(route-map |[ !])/);
if (/^route-map (\S+)/) {
ProcessHistory("ROUTEMAP","keysort","$key","$routemap");
$key = $1;
$routemap = $_;
} else {
$routemap .= $_;
}
}
ProcessHistory("ROUTEMAP","keysort","$key","$routemap");
}
# filter out any RCS/CVS tags to avoid confusing local CVS storage
s/\$(Revision|Id):/ $1:/;
# order access-lists
/^access-list\s+(\d\d?)\s+(\S+)\s+(\S+)/ &&
ProcessHistory("ACL $1 $2","ipsort","$3","$_") && next;
# order extended access-lists
/^access-list\s+(\d\d\d)\s+(\S+)\s+ip\s+host\s+(\S+)/ &&
ProcessHistory("EACL $1 $2","ipsort","$3","$_") && next;
/^access-list\s+(\d\d\d)\s+(\S+)\s+ip\s+(\d\S+)/ &&
ProcessHistory("EACL $1 $2","ipsort","$3","$_") && next;
/^access-list\s+(\d\d\d)\s+(\S+)\s+ip\s+any/ &&
ProcessHistory("EACL $1 $2","ipsort","0.0.0.0","$_") && next;
# order arp lists
/^set arp\s+(\d+\.\d+\.\d+\.\d+)\s+/ &&
ProcessHistory("ARP","ipsort","$1","$_") && next;
/^ip prefix-list\s+(\S+)\s+seq\s+(\d+)\s+(permit|deny)\s+(\d\S+)(\/.*)$/ &&
ProcessHistory("PACL $1 $3","ipsort","$4","ip prefix-list $1 $3 $4$5\n")
&& next;
# order logging statements
/^set logging server (\d+\.\d+\.\d+\.\d+)/ &&
ProcessHistory("LOGGING","ipsort","$1","$_") && next;
# order/prune snmp-server host statements
# we only prune lines of the form
# snmp-server host a.b.c.d
if (/^set snmp trap (\d+\.\d+\.\d+\.\d+) /) {
if (defined($ENV{'NOCOMMSTR'})) {
ProcessHistory("SNMPSERVERHOST","ipsort","$1","!set snmp trap $1 \n");
} else {
ProcessHistory("SNMPSERVERHOST","ipsort","$1","$_");
}
next;
}
if (/^(set snmp community) (\S+) (\S+)/) {
if (defined($ENV{'NOCOMMSTR'})) {
ProcessHistory("SNMPSERVERCOMM","keysort","$_","!$1 $2 \n");
} else {
ProcessHistory("SNMPSERVERCOMM","keysort","$_","$_")
}
next;
}
# order tacacs server statements
/^set (tacacs) key / &&
ProcessHistory("","","","!set $1 key \n") && next;
/^set tacacs server (\d+\.\d+\.\d+\.\d+)/ &&
ProcessHistory("TAC","ipsort","$1","$_") && next;
# order clns host statements
/^clns host \S+ (\S+)/ &&
ProcessHistory("CLNS","keysort","$1","$_") && next;
# order alias statements
/^alias / && ProcessHistory("ALIAS","keysort","$_","$_") && next;
# delete ntp auth password
if (/^(ntp authentication-key \d+ md5) / && $filter_pwds >= 2) {
ProcessHistory("","","","!$1 \n");
next;
}
# order ntp peers/servers
if (/^ntp (server|peer) (\d+)\.(\d+)\.(\d+)\.(\d+)/) {
$sortkey = sprintf("$1 %03d%03d%03d%03d",$2,$3,$4,$5);
ProcessHistory("NTP","keysort",$sortkey,"$_");
next;
}
# order ip host line statements
/^ip host line(\d+)/ &&
ProcessHistory("IPHOST","numsort","$1","$_") && next;
# order ip nat source static statements
/^ip nat (\S+) source static (\S+)/ &&
ProcessHistory("IP NAT $1","ipsort","$2","$_") && next;
# order atm map-list statements
/^\s+ip\s+(\d+\.\d+\.\d+\.\d+)\s+atm-vc/ &&
ProcessHistory("ATM map-list","ipsort","$1","$_") && next;
# order ip rcmd lines
/^ip rcmd/ && ProcessHistory("RCMD","keysort","$_","$_") && next;
ProcessHistory("","","","$_");
# end of config
if (/^end$/) {
$found_end = 1;
return(1);
}
}
return(0);
}
# dummy function
sub DoNothing {print STDOUT;}
# Main
@commandtable = (
{'show version' => 'ShowVersion'},
{'show boot' => 'ShowBoot'},
{'show flash' => 'ShowFlash'},
{'dir bootflash:' => 'DirSlotN'},
{'dir slot0:' => 'DirSlotN'},
{'dir slot1:' => 'DirSlotN'},
{'dir sup-bootflash:' => 'DirSlotN'},
{'dir sup-microcode:' => 'DirSlotN'},
{'show module' => 'ShowModule'},
{'show inventory raw' => 'ShowInventory'},
{'show port ifindex' => 'ShowPortIfindex'},
{'write term all' => 'WriteTerm'},
{'write term' => 'WriteTerm'},
{'show running-config' => 'WriteTerm'}
);
# Use an array to preserve the order of the commands and a hash for mapping
# commands to the subroutine and track commands that have been completed.
@commands = map(keys(%$_), @commandtable);
%commands = map(%$_, @commandtable);
$cisco_cmds=join(";",@commands);
$cmds_regexp=join("|",@commands);
open(OUTPUT,">$host.new") || die "Can't open $host.new for writing: $!\n";
select(OUTPUT);
# make OUTPUT unbuffered if debugging
if ($debug) { $| = 1; }
if ($file) {
print STDERR "opening file $host\n" if ($debug);
print STDOUT "opening file $host\n" if ($log);
open(INPUT,"<$host") || die "open failed for $host: $!\n";
} else {
print STDERR "executing clogin -t $timeo -c\"$cisco_cmds\" $host\n" if ($debug);
print STDOUT "executing clogin -t $timeo -c\"$cisco_cmds\" $host\n" if ($log);
if (defined($ENV{NOPIPE})) {
system "clogin -t $timeo -c \"$cisco_cmds\" $host $host.raw 2>&1" || die "clogin failed for $host: $!\n";
open(INPUT, "< $host.raw") || die "clogin failed for $host: $!\n";
} else {
open(INPUT,"clogin -t $timeo -c \"$cisco_cmds\" $host ) {
tr/\015//d;
if (/> \(enable\) ?exit$/) {
$clean_run=1;
last;
}
if (/^Error:/) {
print STDOUT ("$host clogin error: $_");
print STDERR ("$host clogin error: $_") if ($debug);
$clean_run=0;
last;
}
while (/> \(enable\)\s*($cmds_regexp)\s*$/) {
$cmd = $1;
if (!defined($prompt)) {
$prompt = ($_ =~ /^([^>]+>)/)[0];
$prompt =~ s/([][}{)(\\])/\\$1/g;
print STDERR ("PROMPT MATCH: $prompt\n") if ($debug);
}
print STDERR ("HIT COMMAND:$_") if ($debug);
if (! defined($commands{$cmd})) {
print STDERR "$host: found unexpected command - \"$cmd\"\n";
$clean_run = 0;
last TOP;
}
$rval = &{$commands{$cmd}};
delete($commands{$cmd});
if ($rval == -1) {
$clean_run = 0;
last TOP;
}
}
}
print STDOUT "Done $logincmd: $_\n" if ($log);
# Flush History
ProcessHistory("","","","");
# Cleanup
close(INPUT);
close(OUTPUT);
if (defined($ENV{NOPIPE})) {
unlink("$host.raw") if (! $debug);
}
# check for completeness
if (scalar(%commands) || !$clean_run || !$found_end) {
if (scalar(%commands)) {
printf(STDOUT "$host: missed cmd(s): %s\n", join(',', keys(%commands)));
printf(STDERR "$host: missed cmd(s): %s\n", join(',', keys(%commands))) if ($debug);
}
if (!$clean_run || !$found_end) {
print STDOUT "$host: End of run not found\n";
print STDERR "$host: End of run not found\n" if ($debug);
system("/usr/bin/tail -1 $host.new");
}
unlink "$host.new" if (! $debug);
}