2.2.1 rancid: npe400 cpu eeprom info o/p format changed in 12.0.21S1 - spotted by tom campbell fix problem in *login where if there was a login failure we would try to disconnect gracefully (albeit incorrectly). writing to the half-closed socket would not return an error (at least on some platform/expect combinations or even consistently) and expect would hang. add device name to diff mail subject when -r is specified add -m option to do-diffs and control_rancid to allow specific mail recipient. intended for use with -r to trigger diffs off specific events. router.db(5): note that PIX is a 'cisco' - thank kris gulka *login: match openssh prompt for host key to ip key mismatch rancid: add disk/slot2 rancid: 12.2 show c7200 o/p for midplane changed lg: use table inet.0 terse for sh ip route on juniper instead of forwarding-table destination rancid: 12.0S(21) added "FRU" field in show diagbus output. Also look for a couple more things in some show diag output and sort the output a bit better. Also look for 'controler' (cisco can't always spell - thanks to Terry Kennedy for spotting the misspelling). lg: filter ["`'] from args rancid: fix username secret filtering alogin: misplaced brace caused improper return from proc login relax the check ping and traceroute check of hostname arguments such that non-fqdn hosts are allowed. ie: just check that arg chars are valid dns chars and leave the resolve errors to the router. Add initial support for Force10. 2.2 rancid: filter vpdn passwords on PIX - from eric greenwood *rancid: handle variable amounts of spaces in front of ' password' correctly. rancid: remove key from "crypto isakmp key". *login: cleanup login() to be more generic and handle openssh password reprompting clogin: fix clogin -x for config mode by adjusting the prompt regex lg.conf: add LG_INFO to append local information to the main form {cat5}rancid: add dir of sup-{bootflash,microcode} for 6500 *rancid: print $host before "missed cmds", "unexpected command", and "End of run" messages. cat5 module type match failed when user module name contained spaces add FILTER_PWDS switch to env(5) add merit MRTd support add -r option to do-diffs and control_rancid brancid: handle []'s in bay prompts and drop lock-address from config - from mark cooper extreme: strip password if config|configure. Strip ^M right after ssh key. Look for BOOTLDR: on ciscos. add par.1 manpage allow a TCP port suffix to telnet in .cloginrc - from Alex Bochannek Fixed RANCID-CONTENT-TYPE to be more consistant. Changes are brancid bay cat5rancid cisco-cat erancid adc-ezt3 jlogin should not look for username@router in .cloginrc filter foundry ssh private key filter '#Time" from catalyst 4 write term display platform specific command in lookingglass results - patch from Janos Mohacsi add support for HP procurve switches, in particular 2524M and 4108gl. thanks to hp for the loaners. filter encrypted passwords on alteon as the change for each display More support for Redbacks. rancid now looks for "[kK] bytes" and "slot|disk". clogin now looks for "login:" as well as "Login:" and escapes "[]" in $prompt. 2.2b8 add PAR_COUNT variable to bin/env for adjusting the number of simultaneous collections. see bin/env (or bin/env.new for those with previous installation) and the env(5) manpage. more work on extreme switch bits + fixes from Alex Bochannek. jlogin: add 1s sleeps to avoid passwords being echo'd before tty noecho is set. richard doty few looking glass fixes brancid: filter uptime and add -all option to config for bayrs version 14. from mordechai abzug jrancid: m160 measured chassis clock MHz fluctuates, trim the decimal places. from Mark A Gebert. par: -x fix for log file monitoring killing xterms. from rdrake. 2.2b7 brancid: patch to filter community strings from Mark Cooper do-diffs: trap'ing SEGV (11) causes error on solaris. 2.2b6 baynetworks/nortel support from Mark Cooper. thanks mark! jlogin was overloading -p's variable causing proc login to fail on 2nd router on cmd-line 2.2b5 fix regex error in clogin affecting catalysts clogin attempts to grope entire prompt after login *login need to catch{} -x cmd file open so expect doesnt puke if there is an error opening the file 2.2b4 add extreme switch bits cisco changed the o/p fmt of h/w info on the 65xx in 12.1.8e PIX520 supplies different more(1) prompt than others. from William R Thomas. fix typo in jlogin. from richard doty. add 2 example expect script for clogin -s handle foundrys and more juniper bits in the lookingglass add LG_STRIP knob to strip login o/p in the lookingglass add LG_BGP_RT knob to {dis}allow heavy o/p sh ip bgp neighbor LG cmds bin/clogin shouldnt insist upon an enable password with -noenable option 2.2b3 bin/rancid changes for cisco 124xx some serial controllers (PAs) have predefined cable-type in show controllers. M8T-V.35 was being missed. modify jlogin to grope the full prompt after login such that -x can be used within configuration mode. note: this turns $prompt into a regexp, WRT -s scripts and -re option for expect's. add -Evar=x option to pass variables to scripts. eg: clogin -Evariable=something router... clogin -Evariable=a,b,c [ie: an array/list which user splits] 2.2b2 fix jlogin's password/userpassword functionality which broke when cmd-line options were made consistent. add check for config/* files missing from the cvs repository. add 2 juniper config checks to avoid truncation. 1) config should have at least 1 "section" amounting to at least 3 lines and 2) if a mgd version mismatch exists, there may be inaccuracies. convert usage of Mail to sendmail for portability. local .mailrc aliases can no longer be used. bin/alogin and changes (of beta quality) for Alteon WebOS switch from andrew fort. Check for more types of cisco 12000s. Also check for 2600s. jrancid's show chassis hardware needs detail arg in junos 4.4 make *login print \n before errors, so rancid can use an anchored match to find login errors and avoid such matches in router o/p. make *login automatically add host keys with openssh's prompting All routers not listed as 'up' in router.db are considered down. This allows values other than down to mean 'not up'. for use by util/downreport. 2.1 Change default umask to 027 (it was 007) mainly as an attempt to stop people from changing stuff in rancid's CVS store. Only rancid should be updating its CVS store. control_rancid cvs updates router.db before starting a group's collection. configure now has a --enable-mail-plus option to have rancid send mail to rancid+$GROUP instead of to rancd-$GROUP. Patch from davidw@certaintysolutions.com. configure should figure out diff options on it's own. try to get default user from env() and catch exec on id in *login make clean/distclean was missing some files make sure do-diffs cleans up after itself if it exits prematurely ignore case when cvs delete'g removed routers francid/rrancid (foundry/redback) now strip snmp communities like the others, via NOCOMMSTR var in bin/env. add man pages collect 'sh vlan' on cat 6000 - afort@staff.webcentral.com.au Add 'show vtp status' for the 3500XLs as well. Escape regex meta-chars found in device prompts in *rancid Add "include" directive to include other pwd files via .cloginrc Add "show port ifindex" for the cat5s. Try to detect flash being busy on a cat5. Tag each config file with its 'type'. E.g.: !RANCID-CONTENT-TYPE: cisco fix from afort@staff.webcentral.com.au to lg.cgi to allow prefix-list with numerals. fix lg form's formatting (on some browsers/conditions). Thanks to rrashid@verio.net for the html help. 2.1b add looking glass utility based on Ed Kern's original source. Thanks to Ed for permission to include it with rancid. this is only partially tested. fixed expect foo in *login when .cloginrc is unreadable. Don't sort 'ip name-server' - order matters. 2.0 Better formatting for cisco catalyst [non-ios] switches. Better support the cisco 3500 switches. Get some info out of "show version" for the cat5ks. cat5k "show boot" does variables, not bootflash. Skip more goo from 'write term' on some cat5ks. Collect 'show module' for 6500-ios. Revamp *login's use of .cloginrc's method directive. see cloginrc.sample. Add bits for Cisco PIX. Thanks to joe rizzo@EA for access to a PIX. Sort usernames on ciscos. Get more info out of "show diag" on the GSR. Add "show chassis sfm detail" for the M160. Leave router type in place when telling about changes to router.db. Add autoconf (configure) and makefile bits to automate install and perl/expect replacement 1.6 Add "dir nvram:" to rancid. Add support for ADC EZ T3 mux. adapted from tkenndedy@verio.net's contrib. strip (try to) snmp community strings from cisco and juniper configs if environment variable NOCOMMSTR is set. merge tkennedy@verio.net's support for cisco 2900xl into rancid Ignore "fan spinning at" noise on junipers. 1.5 sync command-line option between clogin / jlogin. jlogin modified: -x passphrase -> -r passphrase -> -x command-file -e encrypt type -> -y ssh_chyper_type add .cloginrc noenable directive to set the cmd-line -noenable option. add .cloginrc userprompt, passprompt, and enableprompt directives to adjust expected cisco router prompts in clogin. see README for info on web interface to rancid CVS repository. Try to detect hung rancid jobs & send email. Add (partial) support for the cat5s. Still need more work on the show output, but it does grab the config. Skip the juniper's kernel version, memory, and fsck output of "show system boot-messages" - fsck output changes every time you boot and the version & memory is better found elsewhere. Delete the cisco ospf authentication and ftp passwords. Get both (juniper) show chassis ssb and scb but only process them once. Get info from show diag for 2600s as well. Catch juniper "command is not valid on the olive" errors. Catch juniper config mismatch between versions of JUNOS. Catch close on EOF in clogin/jlogin/flogin. Don't expand RCS keywords in config files. Catch the case were rancid gets and error and leaves an empty new config file. Make the time to elapse before complaining about unreachable routers be configurable instead of fixed at 24 hrs. The default is now 4 hours. Add -x passphrase to jlogin. You can now set a ssh identity file in .cloginrc for use with jlogin. Handle more errors in jrancid. Also handle changes for JUNOS 4.0 and collect "show system boot-messages" output. rancid now recognizes cisco 12016s and more types of 7200s. It also looks for WARNING messages in show version. And sort ip explicit-paths. 1.4 sort cisco route-maps added (crude) foundry switch bits reworked code to reduce jumps. improvement in speed/cpu util. add bits to cvs delete configs which have been removed from a group's router.db. add support for redback. modified from contrib by scao@verio.net. add support for ssh in clogin modify format of the admin up/down/delete'd msgs. add NOPIPE bin/env var order ARP lists in cisco configs 1.3 update comments re: mail aliases in bin/env add more info/clarification to README for install. 1.2 add more info/clarification to README for install. rename .cloginrc.sample -> cloginrc.sample. clogin patch (courtesy stephen stuart); does two things: - adds a "-x" switch that takes lines from a file and does the same thing as if you'd specified ;-separated commands with -c (newline separates commands). thanks to stephen stuart. - does a subst on commands in run_commands so that expansion of escapes is performed; e.g. you can say "copy rcp://blah slot0:\r" to answer the question that comes after the copy command.