From 1a7c45398738cdb4eaafdc9e0962272f19d54816 Mon Sep 17 00:00:00 2001 From: Tar Committer Date: Tue, 5 Dec 2006 16:52:12 +0000 Subject: Imported from rancid-2.3.2a6.tar.gz. --- man/Makefile.am | 19 +++++---- man/Makefile.in | 109 ++++++++++++++++++++++++++++----------------------- man/arancid.1 | 1 + man/brancid.1 | 1 + man/clogin.1 | 16 ++++++-- man/control_rancid.1 | 7 +++- man/drancid.1 | 1 + man/rancid-cvs.1 | 11 +++++- man/rancid-run.1 | 14 ++++++- man/rancid.1 | 18 ++++++--- man/rancid_intro.1 | 12 +++--- man/router.db.5 | 7 +++- 12 files changed, 137 insertions(+), 79 deletions(-) create mode 100644 man/arancid.1 create mode 100644 man/brancid.1 create mode 100644 man/drancid.1 (limited to 'man') diff --git a/man/Makefile.am b/man/Makefile.am index 11e2391..5cf66fc 100644 --- a/man/Makefile.am +++ b/man/Makefile.am @@ -1,7 +1,7 @@ ## Process this file with automake to produce Makefile.in ## A Makefile.in is supplied, in case you do not have automake. -## $Id: Makefile.am,v 1.45 2004/05/18 15:54:22 heas Exp $ +## $Id: Makefile.am,v 1.46 2006/09/05 02:26:52 asp Exp $ ## ## Copyright (C) 1997-2004 by Terrapin Communications, Inc. ## All rights reserved. @@ -25,15 +25,14 @@ AUTOMAKE_OPTIONS=foreign no-dependencies @SET_MAKE@ man_gen_MANS = lg.conf.5 rancid.conf.5 lg_intro.1 -man_nogen_MANS = alogin.1 blogin.1 clogin.1 control_rancid.1 \ - cssrancid.1 rancid.1 \ - rancid_intro.1 cloginrc.5 router.db.5 \ - elogin.1 f10rancid.1 flogin.1 fnrancid.1 \ - hlogin.1 hrancid.1 htlogin.1 htrancid.1 jlogin.1 \ - jrancid.1 jerancid.1 f10rancid.1 francid.1 cat5rancid.1 \ - erancid.1 mrancid.1 nlogin.1 nrancid.1 nslogin.1 nsrancid.1 \ - par.1 prancid.1 \ - rancid-cvs.1 rancid-run.1 rivlogin.1 rivrancid.1 \ +man_nogen_MANS = alogin.1 arancid.1 blogin.1 brancid.1 cat5rancid.1 \ + clogin.1 cloginrc.5 control_rancid.1 cssrancid.1 \ + drancid.1 elogin.1 erancid.1 f10rancid.1 flogin.1 \ + fnrancid.1 francid.1 hlogin.1 hrancid.1 htlogin.1 \ + htrancid.1 jerancid.1 jlogin.1 jrancid.1 mrancid.1 \ + nlogin.1 nrancid.1 nslogin.1 nsrancid.1 par.1 \ + prancid.1 rancid-cvs.1 rancid-run.1 rancid.1 \ + rancid_intro.1 rivlogin.1 rivrancid.1 router.db.5 \ tntlogin.1 tntrancid.1 xrancid.1 zrancid.1 man_MANS = $(man_nogen_MANS) $(man_gen_MANS) diff --git a/man/Makefile.in b/man/Makefile.in index 43d1c07..f95580a 100644 --- a/man/Makefile.in +++ b/man/Makefile.in @@ -1,8 +1,8 @@ -# Makefile.in generated by automake 1.9.6 from Makefile.am. +# Makefile.in generated by automake 1.10 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005 Free Software Foundation, Inc. +# 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -13,15 +13,11 @@ # PARTICULAR PURPOSE. @SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ -top_builddir = .. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c @@ -55,8 +51,6 @@ MANS = $(man_MANS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ADMINMAILPLUS = @ADMINMAILPLUS@ -AMDEP_FALSE = @AMDEP_FALSE@ -AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ @@ -66,8 +60,6 @@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ COMM = @COMM@ -CONF_INSTALL_FALSE = @CONF_INSTALL_FALSE@ -CONF_INSTALL_TRUE = @CONF_INSTALL_TRUE@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CVS = @CVS@ @@ -87,6 +79,7 @@ EXPECT_PATH = @EXPECT_PATH@ FIND = @FIND@ GREP = @GREP@ ID = @ID@ +INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -100,8 +93,7 @@ MAILPLUS = @MAILPLUS@ MAKE = @MAKE@ MAKEINFO = @MAKEINFO@ MKDIR = @MKDIR@ -MK_LCLSTATEDIR_FALSE = @MK_LCLSTATEDIR_FALSE@ -MK_LCLSTATEDIR_TRUE = @MK_LCLSTATEDIR_TRUE@ +MKDIR_P = @MKDIR_P@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ @@ -127,10 +119,11 @@ TELNET = @TELNET@ TOUCH = @TOUCH@ U = @U@ VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ -ac_ct_STRIP = @ac_ct_STRIP@ -am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ -am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ @@ -138,35 +131,45 @@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build_alias = @build_alias@ +builddir = @builddir@ datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ exec_prefix = @exec_prefix@ host_alias = @host_alias@ +htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ +localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ +psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ AUTOMAKE_OPTIONS = foreign no-dependencies man_gen_MANS = lg.conf.5 rancid.conf.5 lg_intro.1 -man_nogen_MANS = alogin.1 blogin.1 clogin.1 control_rancid.1 \ - cssrancid.1 rancid.1 \ - rancid_intro.1 cloginrc.5 router.db.5 \ - elogin.1 f10rancid.1 flogin.1 fnrancid.1 \ - hlogin.1 hrancid.1 htlogin.1 htrancid.1 jlogin.1 \ - jrancid.1 jerancid.1 f10rancid.1 francid.1 cat5rancid.1 \ - erancid.1 mrancid.1 nlogin.1 nrancid.1 nslogin.1 nsrancid.1 \ - par.1 prancid.1 \ - rancid-cvs.1 rancid-run.1 rivlogin.1 rivrancid.1 \ +man_nogen_MANS = alogin.1 arancid.1 blogin.1 brancid.1 cat5rancid.1 \ + clogin.1 cloginrc.5 control_rancid.1 cssrancid.1 \ + drancid.1 elogin.1 erancid.1 f10rancid.1 flogin.1 \ + fnrancid.1 francid.1 hlogin.1 hrancid.1 htlogin.1 \ + htrancid.1 jerancid.1 jlogin.1 jrancid.1 mrancid.1 \ + nlogin.1 nrancid.1 nslogin.1 nsrancid.1 par.1 \ + prancid.1 rancid-cvs.1 rancid-run.1 rancid.1 \ + rancid_intro.1 rivlogin.1 rivrancid.1 router.db.5 \ tntlogin.1 tntrancid.1 xrancid.1 zrancid.1 man_MANS = $(man_nogen_MANS) $(man_gen_MANS) @@ -220,10 +223,9 @@ $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -uninstall-info-am: install-man1: $(man1_MANS) $(man_MANS) @$(NORMAL_INSTALL) - test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)" + test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)" @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ @@ -268,7 +270,7 @@ uninstall-man1: done install-man5: $(man5_MANS) $(man_MANS) @$(NORMAL_INSTALL) - test -z "$(man5dir)" || $(mkdir_p) "$(DESTDIR)$(man5dir)" + test -z "$(man5dir)" || $(MKDIR_P) "$(DESTDIR)$(man5dir)" @list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ @@ -319,22 +321,21 @@ CTAGS: distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ - list='$(DISTFILES)'; for file in $$list; do \ - case $$file in \ - $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ - $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ - esac; \ + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkdir_p) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ @@ -350,7 +351,7 @@ check: check-am all-am: Makefile $(MANS) installdirs: for dir in "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man5dir)"; do \ - test -z "$$dir" || $(mkdir_p) "$$dir"; \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am @@ -397,12 +398,20 @@ info-am: install-data-am: install-man +install-dvi: install-dvi-am + install-exec-am: +install-html: install-html-am + install-info: install-info-am install-man: install-man1 install-man5 +install-pdf: install-pdf-am + +install-ps: install-ps-am + installcheck-am: maintainer-clean: maintainer-clean-am @@ -421,19 +430,23 @@ ps: ps-am ps-am: -uninstall-am: uninstall-info-am uninstall-man +uninstall-am: uninstall-man uninstall-man: uninstall-man1 uninstall-man5 +.MAKE: install-am install-strip + .PHONY: all all-am check check-am clean clean-generic distclean \ distclean-generic distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-exec \ - install-exec-am install-info install-info-am install-man \ - install-man1 install-man5 install-strip installcheck \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-man1 install-man5 install-pdf install-pdf-am \ + install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ - pdf-am ps ps-am uninstall uninstall-am uninstall-info-am \ - uninstall-man uninstall-man1 uninstall-man5 + pdf-am ps ps-am uninstall uninstall-am uninstall-man \ + uninstall-man1 uninstall-man5 @SET_MAKE@ diff --git a/man/arancid.1 b/man/arancid.1 new file mode 100644 index 0000000..b4633ee --- /dev/null +++ b/man/arancid.1 @@ -0,0 +1 @@ +.so man1/rancid.1 diff --git a/man/brancid.1 b/man/brancid.1 new file mode 100644 index 0000000..b4633ee --- /dev/null +++ b/man/brancid.1 @@ -0,0 +1 @@ +.so man1/rancid.1 diff --git a/man/clogin.1 b/man/clogin.1 index 28ea7fd..021b90d 100644 --- a/man/clogin.1 +++ b/man/clogin.1 @@ -1,12 +1,13 @@ .\" .hys 50 -.TH "clogin" "1" "26 September 2005" +.TH "clogin" "1" "23 November 2006" .SH NAME clogin \- Cisco/Foundry login script .SH SYNOPSIS .B clogin [\fB\-autoenable\fP] [\fB\-noenable\fP] +[\fB\-V\fR] [\c .BI \-c\ command] @@ -54,8 +55,9 @@ catalyst switch, Extreme switch, Juniper ERX/E-series, Procket Networks, or Redback router. There are complementary scripts for Alteon, -Bay Networks (nortel), ADC-kentrox EZ-T3 mux, +Bay Networks (nortel), +Cisco AGM, Foundry, HP Procurve Switches, Hitachi Routers, @@ -89,7 +91,9 @@ options exist to override some of the directives found in the configuration file. .PP The command-line options are as follows: -.PP +.TP +.B \-V +Prints package name and version strings. .TP .B \-c Command to be run on each router list on the command-line. Multiple @@ -211,6 +215,12 @@ will not change the banner on your xterm window if this includes the character 'x'. .\" .TP +.B CLOGINRC +Specifies an alternative location for the +.IR .cloginrc +file, like the \fB\-f\fP option. +.\" +.TP .B HOME Normally set by .BR login (1) diff --git a/man/control_rancid.1 b/man/control_rancid.1 index 225af07..3dd34bf 100644 --- a/man/control_rancid.1 +++ b/man/control_rancid.1 @@ -1,11 +1,11 @@ .\" .hys 50 -.TH "control_rancid" "1" "7 Jan 2004" +.TH "control_rancid" "1" "5 October 2006" .SH NAME control_rancid \- run rancid for devices of a group .SH SYNOPSIS .B control_rancid -[\c +[\fB\-V\fR] [\c .BI \-m\ \c mail_rcpt]\ \c [\c @@ -25,6 +25,9 @@ that failed collection, e-mail diffs, and e-mail error reports. .\" The command-line options are as follows: .TP +.B \-V +Prints package name and version strings. +.TP .B \-m mail_rcpt Specify the recipient of diff mail, which is normally rancid-. The argument may be a single address, multiple comma separated addresses, or diff --git a/man/drancid.1 b/man/drancid.1 new file mode 100644 index 0000000..b4633ee --- /dev/null +++ b/man/drancid.1 @@ -0,0 +1 @@ +.so man1/rancid.1 diff --git a/man/rancid-cvs.1 b/man/rancid-cvs.1 index 3149ad1..41c68dd 100644 --- a/man/rancid-cvs.1 +++ b/man/rancid-cvs.1 @@ -1,11 +1,11 @@ .\" .hys 50 -.TH "rancid-cvs" "1" "13 August 2005" +.TH "rancid-cvs" "1" "5 October 2006" .SH NAME rancid-cvs \- initialize CVS or Subversion and rancid group files and directories .SH SYNOPSIS .B rancid-cvs -[group [group ...]] +[\fB\-V\fR] [group [group ...]] .SH DESCRIPTION .B rancid-cvs creates the directories and @@ -36,6 +36,13 @@ will be skipped, and if it's already exists, it will not be altered. .\" .PP +.\" +The command-line options are as follows: +.TP +.B \-V +Prints package name and version strings. +.\" +.PP The best method for adding groups is add the group name to .I LIST_OF_GROUPS in diff --git a/man/rancid-run.1 b/man/rancid-run.1 index f6ebe23..302bc72 100644 --- a/man/rancid-run.1 +++ b/man/rancid-run.1 @@ -1,10 +1,16 @@ .\" .hys 50 -.TH "rancid-run" "1" "13 August 2005" +.TH "rancid-run" "1" "5 October 2006" .SH NAME rancid-run \- run rancid for each of the groups .SH SYNOPSIS .B rancid-run +[\fB\-V\fR] [\c +.BI \-f\ \c +rancid.conf]\ \c +[\c +.BI \-f\ \c +rancid.conf]\ \c [\c .BI \-m\ \c mail_rcpt]\ \c @@ -63,6 +69,12 @@ For example: .\" The command-line options are as follows: .TP +.B \-V +Prints package name and version strings. +.TP +.B \-f rancid.conf +Specify an alternate configuration file. +.TP .B \-m mail_rcpt Specify the recipient of diff mail, which is normally rancid-. The argument may be a single address, multiple comma separated addresses, or diff --git a/man/rancid.1 b/man/rancid.1 index af44ddc..6095c17 100644 --- a/man/rancid.1 +++ b/man/rancid.1 @@ -1,15 +1,12 @@ .\" .hys 50 -.TH "rancid" "1" "6 Jan 2004" +.TH "rancid" "1" "23 November 2006" .SH NAME rancid \- Cisco configuration filter .SH SYNOPSIS .B rancid -[\fB\-dl\fP] -([\c -.BI \-f\ \c -filename]\ \c -| hostname) +[\fB\-dlV\fP] +(\fB\-f\fP filename | hostname) .SH DESCRIPTION .B rancid is a @@ -29,6 +26,9 @@ that are supported by Briefly, these are: .sp .TP 15 +.B agmrancid +Cisco Anomaly Guard Module (AGM) +.TP 15 .B arancid Alteon WebOS switches .TP @@ -41,6 +41,9 @@ Cisco catalyst switches .B cssrancid Cisco content services switches .TP +.B drancid +Dell switches +.TP .B erancid ADC-kentrox EZ-T3 mux .TP @@ -94,6 +97,9 @@ Zebra routing software .PP The command-line options are as follows: .TP +.B \-V +Prints package name and version strings. +.TP .B \-d Display debugging information. .\" diff --git a/man/rancid_intro.1 b/man/rancid_intro.1 index c00e428..1ccf463 100644 --- a/man/rancid_intro.1 +++ b/man/rancid_intro.1 @@ -1,18 +1,18 @@ .\" -.\" $Id: rancid_intro.1,v 1.29 2005/08/15 00:41:51 heas Exp $ +.\" $Id: rancid_intro.1,v 1.30 2006/11/23 20:26:49 heas Exp $ .\" .hys 50 -.TH "rancid_intro" "1" "13 August 2005" +.TH "rancid_intro" "1" "23 November 2006" .SH NAME rancid_intro \- introduction to the Really Awesome New Cisco confIg Differ .SH INTRODUCTION .B rancid is really more than just a Cisco configuration differ. It handles several different device's configurations; currently including Alteon, Bay Networks -(Nortel), Cisco, Extreme, Force10, Foundry, HP Procurve switches, Juniper -Routers and edge (ERX) routers, Redback, MRTd daemon, Lucent TNT, Netscalar -load balancers, Netscreen firewalls, Zebra routing software, and the -ADC-Kentrox EZ-T3 mux. +(Nortel), Cisco, Cisco AGM, Extreme, Force10, Foundry, HP Procurve switches, +Juniper Routers and edge (ERX) routers, Redback, MRTd daemon, Lucent TNT, +Netscalar load balancers, Netscreen firewalls, Zebra routing software, and +the ADC-Kentrox EZ-T3 mux. .PP .B rancid uses an expect script to login to each of a list of devices and run a set of diff --git a/man/router.db.5 b/man/router.db.5 index 2b9d654..612bca4 100644 --- a/man/router.db.5 +++ b/man/router.db.5 @@ -1,6 +1,6 @@ .\" .hys 50 -.TH "router.db" "5" "13 August 2005" +.TH "router.db" "5" "23 November 2006" .SH NAME router.db \- rancid group configuration file .SH DESCRIPTION @@ -48,6 +48,11 @@ Domain Name) works best, as in the example above. The type of device from the set: .RS 8n .TP +.B agm +A Cisco Anomoly Guard Module (aka Riverhead). +We suspect that at some point the UI will become more cisco-like and it +can be merged with the IOS rancid module. +.TP .B alteon An Alteon WebOS switches. .TP -- cgit